[Why]
Due Page faults can easily overwhelm the interrupt handler.
So to make sure that we never lose valuable interrupts on the primary ring
we re-route page faults to IH ring 1.
It also facilitates the recovery page process, since it's already
running from a process context.
This is valid for Arcturus and future Navi generation GPUs.
[How]
Setting IH_CLIENT_CFG_DATA for VMC and UMD IH clients.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
call psp to program ih cntl in SR-IOV if supported on Navi and Arcturus.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support added into IH to enable ring1 and ring2 for navi10_ih.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
nbio v7.4 size of ih doorbell range is 64 bit. This requires 2 DWords per register.
[How]
Change ih doorbell size from 2 to 4. This means two Dwords per ring.
Current configuration uses two ih rings.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously these registers were set to 0. This was causing an
infinite retry on the UTCL1 RB, preventing higher priority RB such as paging RB.
[How]
Set to one the SDMAx_UTLC1_TIMEOUT registers for all SDMAs on Vega10, Vega12,
Vega20 and Arcturus.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the smu10, smu12, and gfx9 drivers to use headers for
registers instead of hardcoding in the C source files.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have three ib pools, they are normal, VM, direct pools.
Any jobs which schedule IBs without dependence on gpu scheduler should
use DIRECT pool.
Any jobs schedule direct VM update IBs should use VM pool.
Any other jobs use NORMAL pool.
v2: squash in coding style fix
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Can't call dmub_abm_enable_fractional_pwm from dmub_abm_create as
dmub_srv is still null at this init stage, and therefore can't call to
fw.
[How]
Move call to dmub_abm_init_backlight. This should be the first call from
the driver for ABM.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
extend compute lockup timeout to 60000 for SR-IOV.
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Jiawei <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As no need to support vcn decode feature, so disable the
ring for SR-IOV.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if host support new handshake we only need to enter
fullaccess_mode in ip_init() part, otherwise we need
to do it before reading vbios (becuase host prepares vbios
for VF only after received REQ_GPU_INIT event under
legacy handshake)
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
what:
1)move timtout setting before ip_early_init to reduce exclusive mode
cost for SRIOV
2)move ip_discovery_init() to inside of amdgpu_discovery_reg_base_init()
it is a prepare for the later upcoming patches.
why:
in later upcoming patches we would use a new mailbox event --
"req_gpu_init_data", which is a callback hooked in adev->virt.ops and
this callback send a new event "REQ_GPU_INIT_DAT" to host to notify
host to do some preparation like "IP discovery/vbios on the VF FB"
and this callback must be:
A) invoked after set_ip_block() because virt.ops is configured during
set_ip_block()
B) invoked before ip_discovery_init() becausen ip_discovery_init()
need host side prepares everything in VF FB first.
current place of ip_discovery_init() is before we can invoke callback
of adev->virt.ops, thus we must move ip_discovery_init() to a place
after the adev->virt.ops all settle done, and the perfect place is in
amdgpu_discovery_reg_base_init()
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
by this new handshake host side can prepare vbios/ip-discovery
and pf&vf exchange data upon recieving this request without
stopping world switch.
this way the world switch is less impacted by VF's exclusive mode
request
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
what:
with the new "req_init_data" handshake we need to use mailbox
before do IP discovery, so in mxgpu_nv.c file the original
SOC15_REG method won'twork because that depends on IP discovery
complete first.
how:
so the solution is to always use static MMIO offset for NV+ mailbox
registers.
HW team confirm us all MAILBOX registers will be at the same
offset for all ASICs, no IP discovery needed for those registers
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) modify xgpu_nv_send_access_requests to support
new idh request
2) introduce new function: req_gpu_init_data() which
is used to notify host to prepare vbios/ip-discovery/pfvf exchange
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new idh_request and ihd_event to prepare for the
new handshake protocol implementation later
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) drop the headers from AI in mxgpu_nv.c, should refer to mxgpu_nv.h
2) the IDH_EVENT_MAX is not used and not aligned with host side
so drop it
3) the IDH_TEXT_MESSAG was provided in host but not defined in guest
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PWR block was merged into the SMUIO block by revision 12 so we add
that to the smuio_12_0_0 headers.
(v2): Drop nonsensical smuio_10_0_0 header
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The register is part of the PWR block not the GC block. Move to
its own header.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This register is needed by umr.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The conversion to bool is not needed, remove it.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the VCN firmware will not use
vf vmr now. And new psp policy won't support set tmr
now.
For driver compatible issue, ignore the not support error.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 4k resolution for virtual connector.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The crtc num is determined by virtual_display parameter.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added flag to ras context to indicate if ras query functionality is ready
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we need to move virt detection much earlier because:
1) HW team confirms us that RCC_IOV_FUNC_IDENTIFIER will always
be at DE5 (dw) mmio offset from vega10, this way there is no
need to implement detect_hw_virt() routine in each nbio/chip file.
for VI SRIOV chip (tonga & fiji), the BIF_IOV_FUNC_IDENTIFIER is at
0x1503
2) we need to acknowledged we are SRIOV VF before we do IP discovery because
the IP discovery content will be updated by host everytime after it recieved
a new coming "REQ_GPU_INIT_DATA" request from guest (there will be patches
for this new handshake soon).
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
those two headers are not needed for ip discovery
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure that when we memcpy, we don't end up copying more data than
the struct supports. For now, this is 16 characters for product number
and serial number, and 32 chars for product name
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reporting the fw_version just returns 0, the actual version is kept as
ta_*_ucode_version. This is the same as the feature reported in
the amdgpu_firmware_info debugfs file.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added asic support checking function to be filled in by supported asic types
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The registers are needed for umr and not in the headers. I left them
in the gfx_v9_0.c since it includes 9.0 and 9.4 headers and including
9.1 headers would result in a lot of duplicate registers clashing.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow for reading of information like manufacturer, product number
and serial number from the FRU chip. Report the serial number as
the new sysfs file serial_number. Note that this only works on
server cards, as consumer cards do not feature the FRU chip, which
contains this information.
v2: Add documentation to amdgpu.rst, add helper functions,
rename functions for consistency, fix bad starting offset
v3: Remove testing definitions
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Originally, it kfrees the wrong pointer for mem_obj.
It would cause memory leak under stress test.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some displays have an issue where the hdcp chips are initialized after the
display has already lit up. This means we can sometimes authentication too early
and cause authentication failures.
This happens when HDCP is enabled and the display is power cycled. Normally we
will authenticate 2 seconds after the display is lit, but some displays need a
bit more time.
[How]
Increase delay to 3 second before we start authentication.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-We need to cancel future callbacks/watchdogs events when a callback/watchdog event happens
[How]
-fix typo in event_callback()
-cancel callback, not watchdog
-cancel watchdog events in event_watchdog_timer().
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When content type property is set to 1. We should enable hdcp2.2 and if we cant
then stop. Currently the way it works in DC is that if we fail hdcp2, we will
try hdcp1 after.
[How]
Use link config to force disable hdcp1.4 when type1 is set.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is ASIC specific and should be placed in _ppt.c of each ASIC.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is already done in soc15.c. And this is really ASIC specific
and should not be placed here.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML expects num_states to exclude the duplicate state.
[How]
Set num_states to correct value to prevent array off-by-one error. Also
refactor max clock level code for diags.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
BT2020 is not supported in COLOR_ENCODING property of planes. Only
BT601 and BT709 was available.
[How]
Allow BT2020 as legit value in setting COLOR_ENCODING property.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Nominal pixel clock and EDID information differ in precision so although
monitor reports maximum refresh is 2x minimum, LFC was not being
enabled.
[How]
Use minimum refresh rate as nominal/2 when EDID dictates that min
refresh = max refresh/2.
v2: squash in 64 bit divide fix
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
CTM was only supported at CRTC level and we need color space conversion
in linear space at plane level.
[How]
- Add plane-level CTM to dc interface
- Program plane-level CTM in DCN
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Change is causing a regression where the OPC app no longer functions
properly.
[How]
Revert the changelist causing the issue.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
