Currently, in xmon, there is no obvious way to get an address for a
percpu symbol for a particular cpu. Having such an ability would be
good for debugging the system when percpu variables got involved.
Therefore, this patch introduces a new xmon command "lp" to lookup the
address for percpu symbols. Usage of "lp" is similar to "ls", except
that we could add a cpu number to choose the variable of which cpu we
want to lookup. If no cpu number is given, lookup for current cpu.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
huge_pte_offset_and_shift() has never existed
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The symbol memcpy_nocache_branch defined in order to allow patching
of memset function once cache is enabled leads to confusing reports
by perf tool.
Using the new patch_site functionality solves this issue.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During Machine Check interrupt on pseries platform, register r3 points
RTAS extended event log passed by hypervisor. Since hypervisor uses r3
to pass pointer to rtas log, it stores the original r3 value at the
start of the memory (first 8 bytes) pointed by r3. Since hypervisor
stores this info and rtas log is in BE format, linux should make
sure to restore r3 value in correct endian format.
Without this patch when MCE handler, after recovery, returns to code that
that caused the MCE may end up with Data SLB access interrupt for invalid
address followed by kernel panic or hang.
Severe Machine check interrupt [Recovered]
NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
Initiator: CPU
Error type: SLB [Multihit]
Effective address: d00000000ca70000
cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0]
pc: c0000000009694c0: vsnprintf+0x80/0x480
lr: c0000000009698e0: vscnprintf+0x20/0x60
sp: c0000000fc777830
msr: 8000000002009033
dar: a803a30c000000d0
current = 0xc00000000bc9ef00
paca = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01
pid = 8860, comm = insmod
vscnprintf+0x20/0x60
vprintk_emit+0xb4/0x4b0
vprintk_func+0x5c/0xd0
printk+0x38/0x4c
init_module+0x1c0/0x338 [bork_kernel]
do_one_initcall+0x54/0x230
do_init_module+0x8c/0x248
load_module+0x12b8/0x15b0
sys_finit_module+0xa8/0x110
system_call+0x58/0x6c
--- Exception: c00 (System Call) at 00007fff8bda0644
SP (7fffdfbfe980) is in userspace
This patch fixes this issue.
Fixes: a08a53ea4c ("powerpc/le: Enable RTAS events support")
Cc: stable@vger.kernel.org # v3.15+
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With dynamic memory allocation support for crash memory ranges array,
there is no hard limit on the no. of crash memory ranges kernel could
export, but program headers count could overflow in the /proc/vmcore
ELF file while exporting each memory range as PT_LOAD segment. Reduce
the likelihood of a such scenario, by folding adjacent crash memory
ranges which minimizes the total number of PT_LOAD segments.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Crash memory ranges is an array of memory ranges of the crashing kernel
to be exported as a dump via /proc/vmcore file. The size of the array
is set based on INIT_MEMBLOCK_REGIONS, which works alright in most cases
where memblock memory regions count is less than INIT_MEMBLOCK_REGIONS
value. But this count can grow beyond INIT_MEMBLOCK_REGIONS value since
commit 142b45a72e ("memblock: Add array resizing support").
On large memory systems with a few DLPAR operations, the memblock memory
regions count could be larger than INIT_MEMBLOCK_REGIONS value. On such
systems, registering fadump results in crash or other system failures
like below:
task: c00007f39a290010 ti: c00000000b738000 task.ti: c00000000b738000
NIP: c000000000047df4 LR: c0000000000f9e58 CTR: c00000000010f180
REGS: c00000000b73b570 TRAP: 0300 Tainted: G L X (4.4.140+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22004484 XER: 20000000
CFAR: c000000000008500 DAR: 000007a450000000 DSISR: 40000000 SOFTE: 0
...
NIP [c000000000047df4] smp_send_reschedule+0x24/0x80
LR [c0000000000f9e58] resched_curr+0x138/0x160
Call Trace:
resched_curr+0x138/0x160 (unreliable)
check_preempt_curr+0xc8/0xf0
ttwu_do_wakeup+0x38/0x150
try_to_wake_up+0x224/0x4d0
__wake_up_common+0x94/0x100
ep_poll_callback+0xac/0x1c0
__wake_up_common+0x94/0x100
__wake_up_sync_key+0x70/0xa0
sock_def_readable+0x58/0xa0
unix_stream_sendmsg+0x2dc/0x4c0
sock_sendmsg+0x68/0xa0
___sys_sendmsg+0x2cc/0x2e0
__sys_sendmsg+0x5c/0xc0
SyS_socketcall+0x36c/0x3f0
system_call+0x3c/0x100
as array index overflow is not checked for while setting up crash memory
ranges causing memory corruption. To resolve this issue, dynamically
allocate memory for crash memory ranges and resize it incrementally,
in units of pagesize, on hitting array size limit.
Fixes: 2df173d9e8 ("fadump: Initialize elfcore header and add PT_LOAD program headers.")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
[mpe: Just use PAGE_SIZE directly, fixup variable placement]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
commit e8cb7a55eb ("powerpc: remove superflous inclusions of
asm/fixmap.h") removed inclusion of asm/fixmap.h from files not
including objects from that file.
However, asm/mmu-8xx.h includes call to __fix_to_virt(). The proper
way would be to include asm/fixmap.h in asm/mmu-8xx.h but it creates
an inclusion loop.
So we have to leave asm/fixmap.h in sysdep/cpm_common.c for
CONFIG_PPC_EARLY_DEBUG_CPM
CC arch/powerpc/sysdev/cpm_common.o
In file included from ./arch/powerpc/include/asm/mmu.h:340:0,
from ./arch/powerpc/include/asm/reg_8xx.h:8,
from ./arch/powerpc/include/asm/reg.h:29,
from ./arch/powerpc/include/asm/processor.h:13,
from ./arch/powerpc/include/asm/thread_info.h:28,
from ./include/linux/thread_info.h:38,
from ./arch/powerpc/include/asm/ptrace.h:159,
from ./arch/powerpc/include/asm/hw_irq.h:12,
from ./arch/powerpc/include/asm/irqflags.h:12,
from ./include/linux/irqflags.h:16,
from ./include/asm-generic/cmpxchg-local.h:6,
from ./arch/powerpc/include/asm/cmpxchg.h:537,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:5,
from ./include/linux/mutex.h:18,
from ./include/linux/kernfs.h:13,
from ./include/linux/sysfs.h:16,
from ./include/linux/kobject.h:20,
from ./include/linux/device.h:16,
from ./include/linux/node.h:18,
from ./include/linux/cpu.h:17,
from ./include/linux/of_device.h:5,
from arch/powerpc/sysdev/cpm_common.c:21:
arch/powerpc/sysdev/cpm_common.c: In function ‘udbg_init_cpm’:
./arch/powerpc/include/asm/mmu-8xx.h:218:25: error: implicit declaration of function ‘__fix_to_virt’ [-Werror=implicit-function-declaration]
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: error: ‘FIX_IMMR_BASE’ undeclared (first use in this function)
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: note: each undeclared identifier is reported only once for each function it appears in
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
cc1: all warnings being treated as errors
make[1]: *** [arch/powerpc/sysdev/cpm_common.o] Error 1
Fixes: e8cb7a55eb ("powerpc: remove superflous inclusions of asm/fixmap.h")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The problem is the the calculation should be "end - start + 1" but the
plus one is missing in this calculation.
Fixes: 8626816e90 ("powerpc: add support for MPIC message register API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch allows the memory removed by memtrace to be readded to the
kernel. So now you don't have to reboot your system to add the memory
back to the kernel or to have a different amount of memory removed.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Tested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the standard WARN_ON instead.
If a small kernel is desired, WARN_ON can be disabled globally.
Also remove SSB_DEBUG. Besides WARN_ON it only adds a tiny debug check.
Include this check unconditionally.
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The Cortina PHY is not compatible with IEEE 802.3 clause 45.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
[scottwood: made commit message about compatibility, not driver choice]
Signed-off-by: Scott Wood <oss@buserror.net>
The Cortina PHY is not compatible with IEEE 802.3 clause 45.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
[scottwood: made commit message about compatibility, not driver choice]
Signed-off-by: Scott Wood <oss@buserror.net>
Cortina PHYs are present on T4240RDB and T2080RDB. Enable the driver
by default.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
commit e8cb7a55eb ("powerpc: remove superflous inclusions of
asm/fixmap.h") removed inclusion of asm/fixmap.h from files not
including objects from that file.
However, asm/mmu-8xx.h includes call to __fix_to_virt(). The proper
way would be to include asm/fixmap.h in asm/mmu-8xx.h but it creates
an inclusion loop.
So we have to leave asm/fixmap.h in sysdep/cpm_common.c for
CONFIG_PPC_EARLY_DEBUG_CPM
CC arch/powerpc/sysdev/cpm_common.o
In file included from ./arch/powerpc/include/asm/mmu.h:340:0,
from ./arch/powerpc/include/asm/reg_8xx.h:8,
from ./arch/powerpc/include/asm/reg.h:29,
from ./arch/powerpc/include/asm/processor.h:13,
from ./arch/powerpc/include/asm/thread_info.h:28,
from ./include/linux/thread_info.h:38,
from ./arch/powerpc/include/asm/ptrace.h:159,
from ./arch/powerpc/include/asm/hw_irq.h:12,
from ./arch/powerpc/include/asm/irqflags.h:12,
from ./include/linux/irqflags.h:16,
from ./include/asm-generic/cmpxchg-local.h:6,
from ./arch/powerpc/include/asm/cmpxchg.h:537,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:5,
from ./include/linux/mutex.h:18,
from ./include/linux/kernfs.h:13,
from ./include/linux/sysfs.h:16,
from ./include/linux/kobject.h:20,
from ./include/linux/device.h:16,
from ./include/linux/node.h:18,
from ./include/linux/cpu.h:17,
from ./include/linux/of_device.h:5,
from arch/powerpc/sysdev/cpm_common.c:21:
arch/powerpc/sysdev/cpm_common.c: In function ‘udbg_init_cpm’:
./arch/powerpc/include/asm/mmu-8xx.h:218:25: error: implicit declaration of function ‘__fix_to_virt’ [-Werror=implicit-function-declaration]
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: error: ‘FIX_IMMR_BASE’ undeclared (first use in this function)
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: note: each undeclared identifier is reported only once for each function it appears in
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
cc1: all warnings being treated as errors
make[1]: *** [arch/powerpc/sysdev/cpm_common.o] Error 1
Fixes: e8cb7a55eb ("powerpc: remove superflous inclusions of asm/fixmap.h")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
For (bad) historical reasons, OPAL used to create a non-standard pair
of properties "opal-interrupts" and "opal-interrupts-names" for
representing the list of interrupts it wants Linux to request on its
behalf.
Among other issues, the opal-interrupts doesn't have a way to carry
the type of interrupts, and they were assumed to be all level
sensitive.
This is wrong on some recent systems where some of them are edge
sensitive causing warnings in the XIVE code and possible misbehaviours
if they need to be retriggered (typically the NPU2 TCE error
interrupts).
This makes Linux switch to using the standard "interrupts" and
"interrupt-names" properties instead when they are available, using
standard of_irq helpers, which can carry all the desired type
information.
Newer versions of OPAL will generate those properties in addition to
the legacy ones.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Fixup prefix logic to check strlen(r->name). Reinstate setting
of start = 0 in opal_event_shutdown() to avoid double free warnings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC supports -mcpu=e300c2 and -mcpu=e300c3
This patch gives the opportunity to tune kernel to one of
those two types.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch extends to PPC32 the capability to select the exact
CPU type.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the time being, when adding a new CPU for selection, both
Kconfig.cputype and Makefile have to be modified.
This patch moves into Kconfig.cputype the name of the CPU to me
passed to the -mcpu= argument.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Rename the option to TARGET_CPU to echo the gcc documentation]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In Makefiles if we're testing a CONFIG_FOO symbol for equality with 'y'
we can instead just use ifdef. The latter reads easily, so convert to
it where possible.
Signed-off-by: Rodrigo R. Galvao <rosattig@linux.vnet.ibm.com>
Reviewed-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In __copy_tofrom_user, if we encounter an exception on a store, we
stop copying and return the number of bytes not copied. However,
if the store is wider than one byte and is to an unaligned address,
it is possible that the store operand overlaps a page boundary
and the exception occurred on the latter part of the store operand,
meaning that it would be possible to copy a few more bytes. Since
copy_to_user is generally expected to copy as much as possible,
it would be better to copy those extra few bytes. This adds code
to do that. Since this edge case is not performance-critical,
the code has been written to be compact rather than as fast as
possible.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The hand-coded assembler 64-bit copy routines include feature sections
that select one code path or another depending on which CPU we are
executing on. The self-tests for these copy routines end up testing
just one path. This adds a mechanism for selecting any desired code
path at compile time, and makes 2 or 3 versions of each test, each
using a different code path, so as to cover all the possible paths.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Add -mcpu=power4 to CFLAGS for older compilers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This aims to make the generation of exception table entries for the
loads and stores in __copy_tofrom_user_base clearer and easier to
verify. Instead of having a series of local labels on the loads and
stores, with a series of corresponding labels later for the exception
handlers, we now use macros to generate exception table entries at the
point of each load and store that could potentially trap. We do this
with the macros lex (load exception) and stex (store exception).
These macros are used right before the load or store to which they
apply.
Some complexity is introduced by the fact that we have some more work
to do after hitting an exception, because we need to calculate and
return the number of bytes not copied. The code uses r3 as the
current pointer into the destination buffer, that is, the address of
the first byte of the destination that has not been modified.
However, at various points in the copy loops, r3 can be 4, 8, 16 or 24
bytes behind that point.
To express this offset in an understandable way, we define a symbol
r3_offset which is updated at various points so that it equal to the
difference between the address of the first unmodified byte of the
destination and the value in r3. (In fact it only needs to be
accurate at the point of each lex or stex macro invocation.)
The rules for updating r3_offset are as follows:
* It starts out at 0
* An addi r3,r3,N instruction decreases r3_offset by N
* A store instruction (stb, sth, stw, std) to N(r3)
increases r3_offset by the width of the store (1, 2, 4, 8)
* A store with update instruction (stbu, sthu, stwu, stdu) to N(r3)
sets r3_offset to the width of the store.
There is some trickiness to the way that the lex and stex macros and
the associated exception handlers work. I would have liked to use
the current value of r3_offset in the name of the symbol used as
the exception handler, as in ".Lld_exc_$(r3_offset)" and then
have symbols .Lld_exc_0, .Lld_exc_8, .Lld_exc_16 etc. corresponding
to the offsets that needed to be added to r3. However, I couldn't
see a way to do that with gas.
Instead, the exception handler address is .Lld_exc - r3_offset or
.Lst_exc - r3_offset, that is, the distance ahead of .Lld_exc/.Lst_exc
that we start executing is equal to the amount that we need to add to
r3. This works because r3_offset is always a small multiple of 4,
and our instructions are 4 bytes long. This means that before
.Lld_exc and .Lst_exc, we have a sequence of instructions that
increments r3 by 4, 8, 16 or 24 depending on where we start. The
sequence increments r3 by 4 per instruction (on average).
We also replace the exception table for the 4k copy loop by a
macro per load or store. These loads and stores all use exactly
the same exception handler, which simply resets the argument registers
r3, r4 and r5 to there original values and re-does the whole copy
using the slower loop.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
for_each_node_by_name() iterators only exit normally when the loop
cursor is NULL, So there is no need to call of_node_put().
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
NX increments readOffset by FIFO size in receive FIFO control register
when CRB is read. But the index in RxFIFO has to match with the
corresponding entry in FIFO maintained by VAS in kernel. Otherwise NX
may be processing incorrect CRBs and can cause CRB timeout.
VAS FIFO offset is 0 when the receive window is opened during
initialization. When the module is reloaded or in kexec boot, readOffset
in FIFO control register may not match with VAS entry. This patch adds
nx_coproc_init OPAL call to reset readOffset and queued entries in FIFO
control register for both high and normal FIFOs.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
[mpe: Fixup uninitialized variable warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Export opal_check_token symbol for modules to check the availability
of OPAL calls before using them.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix build errors and warnings in t1042rdb_diu.c by adding header files
and MODULE_LICENSE().
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: data definition has no type or storage class
early_initcall(t1042rdb_diu_init);
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: error: type defaults to 'int' in declaration of 'early_initcall' [-Werror=implicit-int]
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: parameter names (without types) in function declaration
and
WARNING: modpost: missing MODULE_LICENSE() in arch/powerpc/platforms/85xx/t1042rdb_diu.o
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Scott Wood <oss@buserror.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The page table fragment allocator uses the main page refcount racily
with respect to speculative references. A customer observed a BUG due
to page table page refcount underflow in the fragment allocator. This
can be caused by the fragment allocator set_page_count stomping on a
speculative reference, and then the speculative failure handler
decrements the new reference, and the underflow eventually pops when
the page tables are freed.
Fix this by using a dedicated field in the struct page for the page
table fragment allocator.
Fixes: 5c1f6ee9a3 ("powerpc: Reduce PTE table memory wastage")
Cc: stable@vger.kernel.org # v3.10+
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pasemi code still uses printk(KERN_ERR/KERN_WARN ... change these to
pr_err(, pr_warn(... to match other powerpc arch code.
No functional changes.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
[mpe: Unsplit some strings while we're at it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Call show_user_instructions() in arch/powerpc/kernel/traps.c to dump
instructions at faulty location, useful to debugging.
Before this patch, an unhandled signal message looked like:
pandafault[10524]: segfault (11) at 100007d0 nip 1000061c lr 7fffbd295100 code 2 in pandafault[10000000+10000]
After this patch, it looks like:
pandafault[10524]: segfault (11) at 100007d0 nip 1000061c lr 7fffbd295100 code 2 in pandafault[10000000+10000]
pandafault[10524]: code: 4bfffeec 4bfffee8 3c401002 38427f00 fbe1fff8 f821ffc1 7c3f0b78 3d22fffe
pandafault[10524]: code: 392988d0 f93f0020 e93f0020 39400048 <99490000> 39200000 7d234b78 383f0040
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
show_user_instructions() is a slightly modified version of
show_instructions() that allows userspace instruction dump.
This will be useful within show_signal_msg() to dump userspace
instructions of the faulty location.
Here is a sample of what show_user_instructions() outputs:
pandafault[10850]: code: 4bfffeec 4bfffee8 3c401002 38427f00 fbe1fff8 f821ffc1 7c3f0b78 3d22fffe
pandafault[10850]: code: 392988d0 f93f0020 e93f0020 39400048 <99490000> 39200000 7d234b78 383f0040
The current->comm and current->pid printed can serve as a glue that
links the instructions dump to its originator, allowing messages to be
interleaved in the logs.
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds VMA address in the message printed for unhandled signals,
similarly to what other architectures, like x86, print.
Before this patch, a page fault looked like:
pandafault[61470]: unhandled signal 11 at 100007d0 nip 1000061c lr 7fff8d185100 code 2
After this patch, a page fault looks like:
pandafault[6303]: segfault 11 at 100007d0 nip 1000061c lr 7fff93c55100 code 2 in pandafault[10000000+10000]
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use %lx format to print registers. This avoids having two different
formats and avoids checking for MSR_64BIT, improving readability of the
function.
Even though we could have used %px, which is functionally equivalent to %lx
as per Documentation/core-api/printk-formats.rst, it is not semantically
correct because the data printed are not pointers. And using %px requires
casting data to (void *).
Besides that, %lx matches the format used in show_regs().
Before this patch:
pandafault[4808]: unhandled signal 11 at 0000000010000718 nip 0000000010000574 lr 00007fff935e7a6c code 2
After this patch:
pandafault[4732]: unhandled signal 11 at 10000718 nip 10000574 lr 7fff86697a6c code 2
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Replace printk_ratelimited() by printk() and a default rate limit
burst to limit displaying unhandled signals messages.
This will allow us to call print_vma_addr() in a future patch, which
does not work with printk_ratelimited().
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Isolate the logic of printing unhandled signals out of _exception_pkey().
No functional change, only code rearrangement.
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Because rfi_flush_fallback runs immediately before the return to
userspace it currently runs with the user r1 (stack pointer). This
means if we oops in there we will report a bad kernel stack pointer in
the exception entry path, eg:
Bad kernel stack pointer 7ffff7150e40 at c0000000000023b4
Oops: Bad kernel stack pointer, sig: 6 [#1]
LE SMP NR_CPUS=32 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1246 Comm: klogd Not tainted 4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3 #7
NIP: c0000000000023b4 LR: 0000000010053e00 CTR: 0000000000000040
REGS: c0000000fffe7d40 TRAP: 4100 Not tainted (4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3)
MSR: 9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE> CR: 44000442 XER: 20000000
CFAR: c00000000000bac8 IRQMASK: c0000000f1e66a80
GPR00: 0000000002000000 00007ffff7150e40 00007fff93a99900 0000000000000020
...
NIP [c0000000000023b4] rfi_flush_fallback+0x34/0x80
LR [0000000010053e00] 0x10053e00
Although the NIP tells us where we were, and the TRAP number tells us
what happened, it would still be nicer if we could report the actual
exception rather than barfing about the stack pointer.
We an do that fairly simply by loading the kernel stack pointer on
entry and restoring the user value before returning. That way we see a
regular oops such as:
Unrecoverable exception 4100 at c00000000000239c
Oops: Unrecoverable exception, sig: 6 [#1]
LE SMP NR_CPUS=32 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1251 Comm: klogd Not tainted 4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty #40
NIP: c00000000000239c LR: 0000000010053e00 CTR: 0000000000000040
REGS: c0000000f1e17bb0 TRAP: 4100 Not tainted (4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty)
MSR: 9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE> CR: 44000442 XER: 20000000
CFAR: c00000000000bac8 IRQMASK: 0
...
NIP [c00000000000239c] rfi_flush_fallback+0x3c/0x80
LR [0000000010053e00] 0x10053e00
Call Trace:
[c0000000f1e17e30] [c00000000000b9e4] system_call+0x5c/0x70 (unreliable)
Note this shouldn't make the kernel stack pointer vulnerable to a
meltdown attack, because it should be flushed from the cache before we
return to userspace. The user r1 value will be in the cache, because
we load it in the return path, but that is harmless.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Look for fw-features properties to determine the appropriate settings
for the count cache flush, and then call the generic powerpc code to
set it up based on the security feature flags.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the existing hypercall to determine the appropriate settings for
the count cache flush, and then call the generic powerpc code to set
it up based on the security feature flags.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some CPU revisions support a mode where the count cache needs to be
flushed by software on context switch. Additionally some revisions may
have a hardware accelerated flush, in which case the software flush
sequence can be shortened.
If we detect the appropriate flag from firmware we patch a branch
into _switch() which takes us to a count cache flush sequence.
That sequence in turn may be patched to return early if we detect that
the CPU supports accelerating the flush sequence in hardware.
Add debugfs support for reporting the state of the flush, as well as
runtime disabling it.
And modify the spectre_v2 sysfs file to report the state of the
software flush.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add security feature flags to indicate the need for software to flush
the count cache on context switch, and for the presence of a hardware
assisted count cache flush.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a macro and some helper C functions for patching single asm
instructions.
The gas macro means we can do something like:
1: nop
patch_site 1b, patch__foo
Which is less visually distracting than defining a GLOBAL symbol at 1,
and also doesn't pollute the symbol table which can confuse eg. perf.
These are obviously similar to our existing feature sections, but are
not automatically patched based on CPU/MMU features, rather they are
designed to be manually patched by C code at some arbitrary point.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Used barrier_nospec to sanitize the syscall table.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Implement the barrier_nospec as a isync;sync instruction sequence.
The implementation uses the infrastructure built for BOOK3S 64.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In a subsequent patch we will enable building security.c for Book3E.
However the NXP platforms are not vulnerable to Meltdown, so make the
Meltdown vulnerability reporting PPC_BOOK3S_64 specific.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we require platform code to call setup_barrier_nospec(). But
if we add an empty definition for the !CONFIG_PPC_BARRIER_NOSPEC case
then we can call it in setup_arch().
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a config symbol to encode which platforms support the
barrier_nospec speculation barrier. Currently this is just Book3S 64
but we will add Book3E in a future patch.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
NXP Book3E platforms are not vulnerable to speculative store
bypass, so make the mitigations PPC_BOOK3S_64 specific.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The speculation barrier can be disabled from the command line
with the parameter: "nospectre_v1".
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We only need to use __MASKABLE_EXCEPTION in one of the four cases for
hardware interrupt, so use the helper macros in the other cases.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We pass the "loc" (location) parameter to MASKABLE_EXCEPTION and
friends, but it's not used, so drop it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_MASKABLE_RELON_EXCEPTION_PSERIES() does nothing useful, update all
callers to use __MASKABLE_RELON_EXCEPTION_PSERIES() directly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_MASKABLE_EXCEPTION_PSERIES() does nothing useful, update all callers
to use __MASKABLE_EXCEPTION_PSERIES() directly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The EXCEPTION_RELON_PROLOG_PSERIES_1() macro does the same job as
EXCEPTION_PROLOG_2 (which we just recently created), except for
"RELON" (relocation on) exceptions.
So rename it as such.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As with the other patches in this series, we are removing the
"PSERIES" from the name as it's no longer meaningful.
In this case it's not simply a case of removing the "PSERIES" as that
would result in a clash with the existing EXCEPTION_PROLOG_1.
Instead we name this one EXCEPTION_PROLOG_2, as it's usually used in
sequence after 0 and 1.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The "PSERIES" in STD_EXCEPTION_PSERIES is to differentiate the macros
from the legacy iSeries versions, which are called
STD_EXCEPTION_ISERIES. It is not anything to do with pseries vs
powernv or powermac etc.
We removed the legacy iSeries code in 2012, in commit 8ee3e0d69623x
("powerpc: Remove the main legacy iSerie platform code").
So remove "PSERIES" from the macros.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
EXCEPTION_RELON_PROLOG_PSERIES() only has two users,
STD_RELON_EXCEPTION_PSERIES() and STD_RELON_EXCEPTION_HV() both of
which "call" SET_SCRATCH0(), so just move SET_SCRATCH0() into
EXCEPTION_RELON_PROLOG_PSERIES().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
EXCEPTION_PROLOG_PSERIES() only has two users, STD_EXCEPTION_PSERIES()
and STD_EXCEPTION_HV() both of which "call" SET_SCRATCH0(), so just
move SET_SCRATCH0() into EXCEPTION_PROLOG_PSERIES().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pasemi arch code finds the root of the PCI-e bus by searching the
device-tree for a node called 'pxp'. But the root bus has a compatible
property of 'pasemi,rootbus' so search for that instead.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The generic implementation of strlen() reads strings byte per byte.
This patch implements strlen() in assembly based on a read of entire
words, in the same spirit as what some other arches and glibc do.
On a 8xx the time spent in strlen is reduced by 3/4 for long strings.
strlen() selftest on an 8xx provides the following values:
Before the patch (ie with the generic strlen() in lib/string.c):
len 256 : time = 1.195055
len 016 : time = 0.083745
len 008 : time = 0.046828
len 004 : time = 0.028390
After the patch:
len 256 : time = 0.272185 ==> 78% improvment
len 016 : time = 0.040632 ==> 51% improvment
len 008 : time = 0.033060 ==> 29% improvment
len 004 : time = 0.029149 ==> 2% degradation
On a 832x:
Before the patch:
len 256 : time = 0.236125
len 016 : time = 0.018136
len 008 : time = 0.011000
len 004 : time = 0.007229
After the patch:
len 256 : time = 0.094950 ==> 60% improvment
len 016 : time = 0.013357 ==> 26% improvment
len 008 : time = 0.010586 ==> 4% improvment
len 004 : time = 0.008784
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
rtas_log_buf is a buffer to hold RTAS event data that are communicated
to kernel by hypervisor. This buffer is then used to pass RTAS event
data to user through proc fs. This buffer is allocated from
vmalloc (non-linear mapping) area.
On Machine check interrupt, register r3 points to RTAS extended event
log passed by hypervisor that contains the MCE event. The pseries
machine check handler then logs this error into rtas_log_buf. The
rtas_log_buf is a vmalloc-ed (non-linear) buffer we end up taking up a
page fault (vector 0x300) while accessing it. Since machine check
interrupt handler runs in NMI context we can not afford to take any
page fault. Page faults are not honored in NMI context and causes
kernel panic. Apart from that, as Nick pointed out,
pSeries_log_error() also takes a spin_lock while logging error which
is not safe in NMI context. It may endup in deadlock if we get another
MCE before releasing the lock. Fix this by deferring the logging of
rtas error to irq work queue.
Current implementation uses two different buffers to hold rtas error
log depending on whether extended log is provided or not. This makes
bit difficult to identify which buffer has valid data that needs to
logged later in irq work. Simplify this using single buffer, one per
paca, and copy rtas log to it irrespective of whether extended log is
provided or not. Allocate this buffer below RMA region so that it can
be accessed in real mode mce handler.
Fixes: b96672dd84 ("powerpc: Machine check interrupt is a non-maskable interrupt")
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The global mce data buffer that used to copy rtas error log is of 2048
(RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read
extended_log_length from rtas error log header, then use max of
extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied.
Ideally the platform (phyp) will never send extended error log with
size > 2048. But if that happens, then we have a risk of buffer overrun
and corruption. Fix this by using min_t instead.
Fixes: d368514c30 ("powerpc: Fix corruption when grabbing FWNMI data")
Reported-by: Michal Suchanek <msuchanek@suse.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It's identical to xive_teardown_cpu() so just use the latter
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Those overly verbose statement in the setup of the pool VP
aren't particularly useful (esp. considering we don't actually
use the pool, we configure it bcs HW requires it only). So
remove them which improves the code readability.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The kernel page table caches are tied to init_mm, so there is no
more need for them after userspace is finished.
destroy_context() gets called when we drop the last reference for an
mm, which can be much later than the task exit due to other lazy mm
references to it. We can free the page table cache pages on task exit
because they only cache the userspace page tables and kernel threads
should not access user space addresses.
The mapping for kernel threads itself is maintained in init_mm and
page table cache for that is attached to init_mm.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Merge change log additions from Aneesh]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the mm is being torn down there will be a full PID flush so
there is no need to flush the TLB on page size changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes it easy to run checkpatch with settings that I like.
Usage is eg:
$ ./arch/powerpc/tools/checkpatch.sh -g origin/master..
To check all commits since origin/master.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Russell Currey <ruscur@russell.cc>
We recently added a warning in arch_local_irq_restore() to check that
the soft masking state matches reality.
Unfortunately it trips in a few places, which are not entirely trivial
to fix. The key problem is if we're doing function_graph tracing of
restore_math(), the warning pops and then seems to recurse. It's not
entirely clear because the system continuously oopses on all CPUs,
with the output interleaved and unreadable.
It's also been observed on a G5 coming out of idle.
Until we can fix those cases disable the warning for now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into HEAD
Pull bug fixes into the KVM development tree to avoid nasty conflicts.
This patch is to add clocks property for fman ptp timer node.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One fix for a regression in a recent TLB flush optimisation, which caused us to
incorrectly not send TLB invalidations to coprocessors.
Thanks to:
Frederic Barrat, Nicholas Piggin, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=Z81h
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a regression in a recent TLB flush optimisation, which
caused us to incorrectly not send TLB invalidations to coprocessors.
Thanks to Frederic Barrat, Nicholas Piggin, Vaibhav Jain"
* tag 'powerpc-4.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/radix: Fix missing global invalidations when removing copro
We've encountered a performance issue when multiple processors stress
{get,put}_mmio_atsd_reg(). These functions contend for
mmio_atsd_usage, an unsigned long used as a bitmask.
The accesses to mmio_atsd_usage are done using test_and_set_bit_lock()
and clear_bit_unlock(). As implemented, both of these will require
a (successful) stwcx to that same cache line.
What we end up with is thread A, attempting to unlock, being slowed by
other threads repeatedly attempting to lock. A's stwcx instructions
fail and retry because the memory reservation is lost every time a
different thread beats it to the punch.
There may be a long-term way to fix this at a larger scale, but for
now resolve the immediate problem by gating our call to
test_and_set_bit_lock() with one to test_bit(), which is obviously
implemented without using a store.
Fixes: 1ab66d1fba ("powerpc/powernv: Introduce address translation services for Nvlink2")
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Acked-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
kernel/dma/Kconfig already defines NEED_DMA_MAP_STATE, just select it
from CONFIG_PPC using the same condition as an if guard.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[mpe: Move it under PPC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 9c7b185ab2 ("powernv/cpuidle: Parse dt idle properties into
global structure") parses dt idle states into structs, but never marks
them valid. This results in all idle states being lost.
Fixes: 9c7b185ab2 ("powernv/cpuidle: Parse dt idle properties into global structure")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to
disable preempt support for alpha, hexagon, non-coldfire m68k and
user mode Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
the top-level Kconfig. For two architectures that means moving their
arch-specific symbols in that menu into a new arch Kconfig.debug file,
and for a few more creating a dummy file so that we can include it
unconditionally.
Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Instead of duplicating the source statements in every architecture just
do it once in the toplevel Kconfig file.
Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
the top-level Kconfig into arch/Kconfig so that don't violate ordering
constraits while keeping a sensible menu structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With the optimizations for TLB invalidation from commit 0cef77c779
("powerpc/64s/radix: flush remote CPUs out of single-threaded
mm_cpumask"), the scope of a TLBI (global vs. local) can now be
influenced by the value of the 'copros' counter of the memory context.
When calling mm_context_remove_copro(), the 'copros' counter is
decremented first before flushing. It may have the unintended side
effect of sending local TLBIs when we explicitly need global
invalidations in this case. Thus breaking any nMMU user in a bad and
unpredictable way.
Fix it by flushing first, before updating the 'copros' counter, so
that invalidations will be global.
Fixes: 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a PCI device is detected, pdev->is_added is set to 1 and proc and
sysfs entries are created.
When the device is removed, pdev->is_added is checked for one and then
device is detached with clearing of proc and sys entries and at end,
pdev->is_added is set to 0.
is_added and is_busmaster are bit fields in pci_dev structure sharing same
memory location.
A strange issue was observed with multiple removal and rescan of a PCIe
NVMe device using sysfs commands where is_added flag was observed as zero
instead of one while removing device and proc,sys entries are not cleared.
This causes issue in later device addition with warning message
"proc_dir_entry" already registered.
Debugging revealed a race condition between the PCI core setting the
is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue
setting the is_busmaster bit in pci_set_master(). As these fields are not
handled atomically, that clears the is_added bit.
Move the is_added bit to a separate private flag variable and use atomic
functions to set and retrieve the device addition state. This avoids the
race because is_added no longer shares a memory location with is_busmaster.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283
Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
EEH recovery currently fails on pSeries for some IOV capable PCI
devices, if CONFIG_PCI_IOV is on and the hypervisor doesn't provide
certain device tree properties for the device. (Found on an IOV
capable device using the ipr driver.)
Recovery fails in pci_enable_resources() at the check on r->parent,
because r->flags is set and r->parent is not. This state is due to
sriov_init() setting the start, end and flags members of the IOV BARs
but the parent not being set later in
pseries_pci_fixup_iov_resources(), because the
"ibm,open-sriov-vf-bar-info" property is missing.
Correct this by zeroing the resource flags for IOV BARs when they
can't be configured (this is the same method used by sriov_init() and
__pci_read_base()).
VFs cleared this way can't be enabled later, because that requires
another device tree property, "ibm,number-of-configurable-vfs" as well
as support for the RTAS function "ibm_map_pes". These are all part of
hypervisor support for IOV and it seems unlikely that a hypervisor
would ever partially, but not fully, support it. (None are currently
provided by QEMU/KVM.)
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Bryant G. Ly <bryantly@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Export pnv_idle_states and nr_pnv_idle_states so that its accessible to
cpuidle driver. Use properties from pnv_idle_states structure for powernv
cpuidle_init.
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Device-tree parsing happens twice, once while deciding idle state to be
used for hotplug and once during cpuidle init. Hence, parsing the device
tree and caching it will reduce code duplication. Parsing code has been
moved to pnv_parse_cpuidle_dt() from pnv_probe_idle_states(). In addition
to the properties in the device tree the number of available states is
also required.
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is nothing arch-specific about PCI or dma-debug, so call
dma_debug_add_bus() from the PCI core just after registering the bus type.
Most of dma-debug is already generic; this just adds reporting of pending
dma-allocations on driver unload for arches other than powerpc, sh, and
x86.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
mmu_init_secondary() calls ppc44x_pin_tlb() which is marked __init,
leading to a warning:
The function mmu_init_secondary() references
the function __init ppc44x_pin_tlb().
There's no CPU hotplug support on 44x so mmu_init_secondary() will
only be called at boot. Therefore we should mark it as __init.
Signed-off-by: Alexey Spirkov <alexeis@astrosoft.ru>
[mpe: Flesh out change log details]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Menzel reported that kmemleak was producing reports such as:
unreferenced object 0xc0000000f8b80000 (size 16384):
comm "init", pid 1, jiffies 4294937416 (age 312.240s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d997deb7>] __pud_alloc+0x80/0x190
[<0000000087f2e8a3>] move_page_tables+0xbac/0xdc0
[<00000000091e51c2>] shift_arg_pages+0xc0/0x210
[<00000000ab88670c>] setup_arg_pages+0x22c/0x2a0
[<0000000060871529>] load_elf_binary+0x41c/0x1648
[<00000000ecd9d2d4>] search_binary_handler.part.11+0xbc/0x280
[<0000000034e0cdd7>] __do_execve_file.isra.13+0x73c/0x940
[<000000005f953a6e>] sys_execve+0x58/0x70
[<000000009700a858>] system_call+0x5c/0x70
Indicating that a PUD was being leaked.
However what's really happening is that kmemleak is not able to
recognise the references from the PGD to the PUD, because they are not
fully qualified pointers.
We can confirm that in xmon, eg:
Find the task struct for pid 1 "init":
0:mon> P
task_struct ->thread.ksp PID PPID S P CMD
c0000001fe7c0000 c0000001fe803960 1 0 S 13 systemd
Dump virtual address 0 to find the PGD:
0:mon> dv 0 c0000001fe7c0000
pgd @ 0xc0000000f8b01000
Dump the memory of the PGD:
0:mon> d c0000000f8b01000
c0000000f8b01000 00000000f8b90000 0000000000000000 |................|
c0000000f8b01010 0000000000000000 0000000000000000 |................|
c0000000f8b01020 0000000000000000 0000000000000000 |................|
c0000000f8b01030 0000000000000000 00000000f8b80000 |................|
^^^^^^^^^^^^^^^^
There we can see the reference to our supposedly leaked PUD. But
because it's missing the leading 0xc, kmemleak won't recognise it.
We can confirm it's still in use by translating an address that is
mapped via it:
0:mon> dv 7fff94000000 c0000001fe7c0000
pgd @ 0xc0000000f8b01000
pgdp @ 0xc0000000f8b01038 = 0x00000000f8b80000 <--
pudp @ 0xc0000000f8b81ff8 = 0x00000000037c4000
pmdp @ 0xc0000000037c5ca0 = 0x00000000fbd89000
ptep @ 0xc0000000fbd89000 = 0xc0800001d5ce0386
Maps physical address = 0x00000001d5ce0000
Flags = Accessed Dirty Read Write
The fix is fairly simple. We need to tell kmemleak to ignore PUD
allocations and never report them as leaks. We can also tell it not to
scan the PGD, because it will never find pointers in there. However it
will still notice if we allocate a PGD and then leak it.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
asm/tlbflush.h is only needed for:
- using functions xxx_flush_tlb_xxx()
- using MMU_NO_CONTEXT
- including asm-generic/pgtable.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mmu-44x.h doesn't need asm/page.h if PAGE_SHIFT are replaced by CONFIG_PPC_XX_PAGES
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove superflous includes and add missing ones
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC_PIN_SIZE is specific to the 44x and is defined in mmu.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
set_breakpoint() is only used in process.c so make it static
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Files not using fixmap consts or functions don't need asm/fixmap.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
files not using feature fixup don't need asm/feature-fixups.h
files using feature fixup need asm/feature-fixups.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only include linux/stringify.h is files using __stringify()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch moves ASM_CONST() and stringify_in_c() into
dedicated asm-const.h, then cleans all related inclusions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: asm-compat.h should include asm-const.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Files not using cpu_has_feature() don't need cpu_has_feature.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 1e175d2 ("KVM: PPC: Book3S HV: Pack VCORE IDs to access full
VCPU ID space", 2018-07-25) added code that uses kvm->arch.emul_smt_mode
before any VCPUs are created. However, userspace can change
kvm->arch.emul_smt_mode at any time up until the first VCPU is created.
Hence it is (theoretically) possible for the check in
kvmppc_core_vcpu_create_hv() to race with another userspace thread
changing kvm->arch.emul_smt_mode.
This fixes it by moving the test that uses kvm->arch.emul_smt_mode into
the block where kvm->lock is held.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Commit 1e175d2 ("KVM: PPC: Book3S HV: Pack VCORE IDs to access full
VCPU ID space", 2018-07-25) allowed use of VCPU IDs up to
KVM_MAX_VCPU_ID on POWER9 in all guest SMT modes and guest emulated
hardware SMT modes. However, with the current definition of
KVM_MAX_VCPU_ID, a guest SMT mode of 1 and an emulated SMT mode of 8,
it is only possible to create KVM_MAX_VCPUS / 2 VCPUS, because
threads_per_subcore is 4 on POWER9 CPUs. (Using an emulated SMT mode
of 8 is useful when migrating VMs to or from POWER8 hosts.)
This increases KVM_MAX_VCPU_ID to 8 * KVM_MAX_VCPUS when HV KVM is
configured in, so that a full complement of KVM_MAX_VCPUS VCPUs can
be created on POWER9 in all guest SMT modes and emulated hardware
SMT modes.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
It is not currently possible to create the full number of possible
VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer
threads per core than its core stride (or "VSMT mode"). This is
because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS
even though the VCPU ID is less than KVM_MAX_VCPU_ID.
To address this, "pack" the VCORE ID and XIVE offsets by using
knowledge of the way the VCPU IDs will be used when there are fewer
guest threads per core than the core stride. The primary thread of
each core will always be used first. Then, if the guest uses more than
one thread per core, these secondary threads will sequentially follow
the primary in each core.
So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the
VCPUs are being spaced apart, so at least half of each core is empty,
and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped
into the second half of each core (4..7, in an 8-thread core).
Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of
each core is being left empty, and we can map down into the second and
third quarters of each core (2, 3 and 5, 6 in an 8-thread core).
Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary
threads are being used and 7/8 of the core is empty, allowing use of
the 1, 5, 3 and 7 thread slots.
(Strides less than 8 are handled similarly.)
This allows the VCORE ID or offset to be calculated quickly from the
VCPU ID or XIVE server numbers, without access to the VCPU structure.
[paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE
to pr_devel, wrapped line, fixed id check.]
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently architectures can override __atomic_op_*() to define the barriers
used before/after a relaxed atomic when used to build acquire/release/fence
variants.
This has the unfortunate property of requiring the architecture to define the
full wrapper for the atomics, rather than just the barriers they care about,
and gets in the way of generating atomics which can be easily read.
Instead, this patch has architectures define an optional set of barriers:
* __atomic_acquire_fence()
* __atomic_release_fence()
* __atomic_pre_full_fence()
* __atomic_post_full_fence()
... which <linux/atomic.h> uses to build the wrappers.
It would be nice if we could undef these, along with the __atomic_op_*()
wrappers, but that would break the cmpxchg() wrappers, which are written
in preprocessor. Undefs would have been nice, but alas.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andy.shevchenko@gmail.com
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: catalin.marinas@arm.com
Cc: dvyukov@google.com
Cc: glider@google.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: peter@hurleysoftware.com
Link: http://lkml.kernel.org/r/20180716113017.3909-7-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Handle stations tied to AP_VLANs properly during mac80211 hw
reconfig. From Manikanta Pubbisetty.
2) Fix jump stack depth validation in nf_tables, from Taehee Yoo.
3) Fix quota handling in aRFS flow expiration of mlx5 driver, from Eran
Ben Elisha.
4) Exit path handling fix in powerpc64 BPF JIT, from Daniel Borkmann.
5) Use ptr_ring_consume_bh() in page pool code, from Tariq Toukan.
6) Fix cached netdev name leak in nf_tables, from Florian Westphal.
7) Fix memory leaks on chain rename, also from Florian Westphal.
8) Several fixes to DCTCP congestion control ACK handling, from Yuchunk
Cheng.
9) Missing rcu_read_unlock() in CAIF protocol code, from Yue Haibing.
10) Fix link local address handling with VRF, from David Ahern.
11) Don't clobber 'err' on a successful call to __skb_linearize() in
skb_segment(). From Eric Dumazet.
12) Fix vxlan fdb notification races, from Roopa Prabhu.
13) Hash UDP fragments consistently, from Paolo Abeni.
14) If TCP receives lots of out of order tiny packets, we do really
silly stuff. Make the out-of-order queue ending more robust to this
kind of behavior, from Eric Dumazet.
15) Don't leak netlink dump state in nf_tables, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: axienet: Fix double deregister of mdio
qmi_wwan: fix interface number for DW5821e production firmware
ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull
bnx2x: Fix invalid memory access in rss hash config path.
net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
r8169: restore previous behavior to accept BIOS WoL settings
cfg80211: never ignore user regulatory hint
sock: fix sg page frag coalescing in sk_alloc_sg
netfilter: nf_tables: move dumper state allocation into ->start
tcp: add tcp_ooo_try_coalesce() helper
tcp: call tcp_drop() from tcp_data_queue_ofo()
tcp: detect malicious patterns in tcp_collapse_ofo_queue()
tcp: avoid collapses in tcp_prune_queue() if possible
tcp: free batches of packets in tcp_prune_ofo_queue()
ip: hash fragments consistently
ipv6: use fib6_info_hold_safe() when necessary
can: xilinx_can: fix power management handling
can: xilinx_can: fix incorrect clear of non-processed interrupts
can: xilinx_can: fix RX overflow interrupt not being enabled
can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
...
The RAW console does not need writes to be atomic, so relax
opal_put_chars to be able to do partial writes, and implement an
_atomic variant which does not take a spinlock. This API is used
in xmon, so the less locking that is used, the better chance there
is that a crash can be debugged.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPAL console writes do not have to synchronously flush firmware /
hardware buffers unless they are going through the udbg path.
Remove the unconditional flushing from opal_put_chars. Flush if
there was no space in the buffer as an optimisation (callers loop
waiting for success in that case). udbg flushing is moved to
udbg_opal_putc.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
opal_put_chars deals with partial writes because in OPALv1,
opal_console_write_buffer_space did not work correctly. That firmware
is not supported.
This reworks the opal_put_chars code to no longer deal with partial
writes by turning them into full writes. Partial write handling is still
supported in terms of what gets returned to the caller, but it may not
go to the console atomically. A warning message is printed in this
case.
This allows console flushing to be moved out of the opal_write_lock
spinlock. That could cause the lock to be held for long periods if the
console is busy (especially if it was being spammed by firmware),
which is dangerous because the lock is taken by xmon to debug the
system. Flushing outside the lock improves the situation a bit.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A new console flushing firmware API was introduced to replace event
polling loops, and implemented in opal-kmsg with affddff69c
("powerpc/powernv: Add a kmsg_dumper that flushes console output on
panic"), to flush the console in the panic path.
The OPAL console driver has other situations where interrupts are off
and it needs to flush the console synchronously. These still use a
polling loop.
So move the opal-kmsg flush code to opal_flush_console, and use the
new function in opal-kmsg and opal_put_chars.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the more refined and tested event polling loop from opal_put_chars
as the fallback console flush in the opal-kmsg path. This loop is used
by the console driver today, whereas the opal-kmsg fallback is not
likely to have been used for years.
Use WARN_ONCE rather than a printk when the fallback is invoked to
prepare for moving the console flush into a common function.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPAL_CONSOLE_FLUSH is documented as being able to return OPAL_BUSY,
so implement the standard OPAL_BUSY handling for it.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The OPAL console driver does not delay in case it gets OPAL_BUSY or
OPAL_BUSY_EVENT from firmware.
It can't yet be made to sleep because it is called under spinlock,
but it can be changed to the standard OPAL_BUSY loop form, and a
delay added to keep it from hitting the firmware too frequently.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The intention here is to consume and discard the remaining buffer
upon error. This works if there has not been a previous partial write.
If there has been, then total_len is no longer total number of bytes
to copy. total_len is always "bytes left to copy", so it should be
added to written bytes.
This code may not be exercised any more if partial writes will not be
hit, but this is a small bugfix before a larger change.
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: 8034f715f ("powernv/opal-dump: Convert to irq domain")
Converts all the return explicit number to a more proper IRQ_HANDLED,
which looks proper incase of interrupt handler returning case.
Here, It also removes error message like "nobody cared" which was
getting unveiled while returning -1 or 0 from handler.
Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Moves the return value check of 'opal_dump_info' to a proper place which
was previously unnecessarily filling all the dump info even on failure.
Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit dc3106690b ("powerpc: tm: Always use fp_state and
vr_state to store live registers") tm_reclaim_thread() doesn't use the
parameter anymore, both callers have to bother getting it as they have
no need for a struct thread_info either.
Just remove it and adjust the callers.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit eb5c3f1c86 ("powerpc: Always save/restore checkpointed regs
during treclaim/trecheckpoint") __tm_recheckpoint was modified to no
longer take the second parameter 'unsigned long orig_msr' as part of a
TM rewrite to simplify the reclaiming/recheckpointing process.
There is a comment in the asm file where the function is delcared which
has an incorrect prototype with the 'orig_msr' parameter.
This patch corrects the comment.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch is based on the previous VMX patch on memcmp().
To optimize ppc64 memcmp() with VMX instruction, we need to think about
the VMX penalty brought with: If kernel uses VMX instruction, it needs
to save/restore current thread's VMX registers. There are 32 x 128 bits
VMX registers in PPC, which means 32 x 16 = 512 bytes for load and store.
The major concern regarding the memcmp() performance in kernel is KSM,
who will use memcmp() frequently to merge identical pages. So it will
make sense to take some measures/enhancement on KSM to see whether any
improvement can be done here. Cyril Bur indicates that the memcmp() for
KSM has a higher possibility to fail (unmatch) early in previous bytes
in following mail.
https://patchwork.ozlabs.org/patch/817322/#1773629
And I am taking a follow-up on this with this patch.
Per some testing, it shows KSM memcmp() will fail early at previous 32
bytes. More specifically:
- 76% cases will fail/unmatch before 16 bytes;
- 83% cases will fail/unmatch before 32 bytes;
- 84% cases will fail/unmatch before 64 bytes;
So 32 bytes looks a better choice than other bytes for pre-checking.
The early failure is also true for memcmp() for non-KSM case. With a
non-typical call load, it shows ~73% cases fail before first 32 bytes.
This patch adds a 32 bytes pre-checking firstly before jumping into VMX
operations, to avoid the unnecessary VMX penalty. It is not limited to
KSM case. And the testing shows ~20% improvement on memcmp() average
execution time with this patch.
And note the 32B pre-checking is only performed when the compare size
is long enough (>=4K currently) to allow VMX operation.
The detail data and analysis is at:
https://github.com/justdoitqd/publicFiles/blob/master/memcmp/README.md
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch add VMX primitives to do memcmp() in case the compare size
is equal or greater than 4K bytes. KSM feature can benefit from this.
Test result with following test program(replace the "^>" with ""):
------
># cat tools/testing/selftests/powerpc/stringloops/memcmp.c
>#include <malloc.h>
>#include <stdlib.h>
>#include <string.h>
>#include <time.h>
>#include "utils.h"
>#define SIZE (1024 * 1024 * 900)
>#define ITERATIONS 40
int test_memcmp(const void *s1, const void *s2, size_t n);
static int testcase(void)
{
char *s1;
char *s2;
unsigned long i;
s1 = memalign(128, SIZE);
if (!s1) {
perror("memalign");
exit(1);
}
s2 = memalign(128, SIZE);
if (!s2) {
perror("memalign");
exit(1);
}
for (i = 0; i < SIZE; i++) {
s1[i] = i & 0xff;
s2[i] = i & 0xff;
}
for (i = 0; i < ITERATIONS; i++) {
int ret = test_memcmp(s1, s2, SIZE);
if (ret) {
printf("return %d at[%ld]! should have returned zero\n", ret, i);
abort();
}
}
return 0;
}
int main(void)
{
return test_harness(testcase, "memcmp");
}
------
Without this patch (but with the first patch "powerpc/64: Align bytes
before fall back to .Lshort in powerpc64 memcmp()." in the series):
4.726728762 seconds time elapsed ( +- 3.54%)
With VMX patch:
4.234335473 seconds time elapsed ( +- 2.63%)
There is ~+10% improvement.
Testing with unaligned and different offset version (make s1 and s2 shift
random offset within 16 bytes) can archieve higher improvement than 10%..
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some old tool chains don't know about instructions like vcmpequd.
This patch adds .long macro for vcmpequd and vcmpequb, which is
a preparation to optimize ppc64 memcmp with VMX instructions.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently memcmp() 64bytes version in powerpc will fall back to .Lshort
(compare per byte mode) if either src or dst address is not 8 bytes aligned.
It can be opmitized in 2 situations:
1) if both addresses are with the same offset with 8 bytes boundary:
memcmp() can compare the unaligned bytes within 8 bytes boundary firstly
and then compare the rest 8-bytes-aligned content with .Llong mode.
2) If src/dst addrs are not with the same offset of 8 bytes boundary:
memcmp() can align src addr with 8 bytes, increment dst addr accordingly,
then load src with aligned mode and load dst with unaligned mode.
This patch optmizes memcmp() behavior in the above 2 situations.
Tested with both little/big endian. Performance result below is based on
little endian.
Following is the test result with src/dst having the same offset case:
(a similar result was observed when src/dst having different offset):
(1) 256 bytes
Test with the existing tools/testing/selftests/powerpc/stringloops/memcmp:
- without patch
29.773018302 seconds time elapsed ( +- 0.09% )
- with patch
16.485568173 seconds time elapsed ( +- 0.02% )
-> There is ~+80% percent improvement
(2) 32 bytes
To observe performance impact on < 32 bytes, modify
tools/testing/selftests/powerpc/stringloops/memcmp.c with following:
-------
#include <string.h>
#include "utils.h"
-#define SIZE 256
+#define SIZE 32
#define ITERATIONS 10000
int test_memcmp(const void *s1, const void *s2, size_t n);
--------
- Without patch
0.244746482 seconds time elapsed ( +- 0.36%)
- with patch
0.215069477 seconds time elapsed ( +- 0.51%)
-> There is ～+13% improvement
(3) 0~8 bytes
To observe <8 bytes performance impact, modify
tools/testing/selftests/powerpc/stringloops/memcmp.c with following:
-------
#include <string.h>
#include "utils.h"
-#define SIZE 256
-#define ITERATIONS 10000
+#define SIZE 8
+#define ITERATIONS 1000000
int test_memcmp(const void *s1, const void *s2, size_t n);
-------
- Without patch
1.845642503 seconds time elapsed ( +- 0.12% )
- With patch
1.849767135 seconds time elapsed ( +- 0.26% )
-> They are nearly the same. (-0.2%)
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds error reporting to H_ENTER and H_READ hcalls. A
failure for both these hcalls are mostly fatal and it would be good to
log the failure reason.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Switch from printk to pr_fmt() / pr_xxx().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We do this in some part. This patch make sure we always try to search
for hpte without holding lock and redo the compare with lock held once
match found.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When computing the starting slot number for a hash page table group we used
to do this
hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
Multiplying with 8 (HPTES_PER_GROUP) imply the last three bits are 0. Hence we
really don't need to clear then separately.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We do this only with VMEMMAP config so that our page_to_[nid/section] etc are not
impacted.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With SPARSEMEM config enabled, we make sure that we don't add sections beyond
MAX_PHYSMEM_BITS range. This results in not building vmemmap mapping for
range beyond max range. But our memblock layer looks the device tree and create
mapping for the full memory range. Prevent this by checking against
MAX_PHSYSMEM_BITS when doing memblock_add.
We don't do similar check for memeblock_reserve_range. If reserve range is beyond
MAX_PHYSMEM_BITS we expect that to be configured with 'nomap'. Any other
reserved range should come from existing memblock ranges which we already
filtered while adding.
This avoids crash as below when running on a system with system ram config above
MAX_PHSYSMEM_BITS
Unable to handle kernel paging request for data at address 0xc00a001000000440
Faulting instruction address: 0xc000000001034118
cpu 0x0: Vector: 300 (Data Access) at [c00000000124fb30]
pc: c000000001034118: __free_pages_bootmem+0xc0/0x1c0
lr: c00000000103b258: free_all_bootmem+0x19c/0x22c
sp: c00000000124fdb0
msr: 9000000002001033
dar: c00a001000000440
dsisr: 40000000
current = 0xc00000000120dd00
paca = 0xc000000001f60000^I irqmask: 0x03^I irq_happened: 0x01
pid = 0, comm = swapper
[c00000000124fe20] c00000000103b258 free_all_bootmem+0x19c/0x22c
[c00000000124fee0] c000000001010a68 mem_init+0x3c/0x5c
[c00000000124ff00] c00000000100401c start_kernel+0x298/0x5e4
[c00000000124ff90] c00000000000b57c start_here_common+0x1c/0x520
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Similarly as we just did for 32-bit, add phony targets for generating
a little endian and Book3E allmodconfig. These aren't covered by the
regular allmodconfig, which is big endian and Book3S due to the way
the Kconfig symbols are structured.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Because the allmodconfig logic just sets every symbol to M or Y, it
has the effect of always generating a 64-bit config, because
CONFIG_PPC64 becomes Y.
So to make it easier for folks to test 32-bit code, provide a phony
defconfig target that generates a 32-bit allmodconfig.
The 32-bit port has several mutually exclusive CPU types, we choose
the Book3S variants as that's what the help text in Kconfig says is
most common.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When I added the spectre_v2 information in sysfs, I included the
availability of the ori31 speculation barrier.
Although the ori31 barrier can be used to mitigate v2, it's primarily
intended as a spectre v1 mitigation. Spectre v2 is mitigated by
hardware changes.
So rework the sysfs files to show the ori31 information in the
spectre_v1 file, rather than v2.
Currently we display eg:
$ grep . spectre_v*
spectre_v1:Mitigation: __user pointer sanitization
spectre_v2:Mitigation: Indirect branch cache disabled, ori31 speculation barrier enabled
After:
$ grep . spectre_v*
spectre_v1:Mitigation: __user pointer sanitization, ori31 speculation barrier enabled
spectre_v2:Mitigation: Indirect branch cache disabled
Fixes: d6fbe1c55c ("powerpc/64s: Wire up cpu_show_spectre_v2()")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is an asynchronous aspect to smp_send_nmi_ipi. The caller waits
for all CPUs to call in to the handler, but it does not wait for
completion of the handler. This is a needless complication, so remove
it and always wait synchronously.
The synchronous wait allows the caller to easily time out and clear
the wait for completion (zero nmi_ipi_busy_count) in the case of badly
behaved handlers. This would have prevented the recent smp_send_stop
NMI IPI bug from causing the system to hang.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the masked interrupt handler clears MSR[EE] for an interrupt in
the PACA_IRQ_MUST_HARD_MASK set, it does not set PACA_IRQ_HARD_DIS.
This makes them get out of synch.
With that taken into account, it's only low level irq manipulation
(and interrupt entry before reconcile) where they can be out of synch.
This makes the code less surprising.
It also allows the IRQ replay code to rely on the IRQ_HARD_DIS value
and not have to mtmsrd again in this case (e.g., for an external
interrupt that has been masked). The bigger benefit might just be
that there is not such an element of surprise in these two bits of
state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Applications need the ability to associate an address-range with some
key and latter revert to its initial default key. Pkey-0 comes close to
providing this function but falls short, because the current
implementation disallows applications to explicitly associate pkey-0 to
the address range.
Lets make pkey-0 less special and treat it almost like any other key.
Thus it can be explicitly associated with any address range, and can be
freed. This gives the application more flexibility and power. The
ability to free pkey-0 must be used responsibily, since pkey-0 is
associated with almost all address-range by default.
Even with this change pkey-0 continues to be slightly more special
from the following point of view.
(a) it is implicitly allocated.
(b) it is the default key assigned to any address-range.
(c) its permissions cannot be modified by userspace.
NOTE: (c) is specific to powerpc only. pkey-0 is associated by default
with all pages including kernel pages, and pkeys are also active in
kernel mode. If any permission is denied on pkey-0, the kernel running
in the context of the application will be unable to operate.
Tested on powerpc.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Drop #define PKEY_0 0 in favour of plain old 0]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
execute-only key is allocated dynamically. This is a problem. When a
thread implicitly creates an execute-only key, and resets the UAMOR
for that key, the UAMOR value does not percolate to all the other
threads. Any other thread may ignorantly change the permissions on the
key. This can cause the key to be not execute-only for that thread.
Preallocate the execute-only key and ensure that no thread can change
the permission of the key, by resetting the corresponding bit in
UAMOR.
Fixes: 5586cf61e1 ("powerpc: introduce execute-only pkey")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Total number of pkeys calculation is off by 1. Fix it.
Fixes: 4fb158f65a ("powerpc: track allocation status of all pkeys")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a thread forks the contents of AMR, IAMR, UAMOR registers in the
newly forked thread are not inherited.
Save the registers before forking, for content of those
registers to be automatically copied into the new thread.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Key allocation and deallocation has the side effect of programming the
UAMOR/AMR/IAMR registers. This is wrong, since its the responsibility of
the application and not that of the kernel, to modify the permission on
the key.
Do not modify the pkey registers at key allocation/deallocation.
This patch also fixes a bug where a sys_pkey_free() resets the UAMOR
bits of the key, thus making its permissions unmodifiable from user
space. Later if the same key gets reallocated from a different thread
this thread will no longer be able to change the permissions on the key.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Cc: stable@vger.kernel.org # v4.16+
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Deny all permissions on all keys, with some exceptions. pkey-0 must
allow all permissions, or else everything comes to a screaching halt.
Execute-only key must allow execute permission.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently in a multithreaded application, a key allocated by one
thread is not usable by other threads. By "not usable" we mean that
other threads are unable to change the access permissions for that
key for themselves.
When a new key is allocated in one thread, the corresponding UAMOR
bits for that thread get enabled, however the UAMOR bits for that key
for all other threads remain disabled.
Other threads have no way to set permissions on the key, and the
current default permissions are that read/write is enabled for all
keys, which means the key has no effect for other threads. Although
that may be the desired behaviour in some circumstances, having all
threads able to control their permissions for the key is more
flexible.
The current behaviour also differs from the x86 behaviour, which is
problematic for users.
To fix this, enable the UAMOR bits for all keys, at process
creation (in start_thread(), ie exec time). Since the contents of
UAMOR are inherited at fork, all threads are capable of modifying the
permissions on any key.
This is technically an ABI break on powerpc, but pkey support is fairly
new on powerpc and not widely used, and this brings us into
line with x86.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Cc: stable@vger.kernel.org # v4.16+
Tested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[mpe: Reword some of the changelog]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This property was added in 2004 and the only use of it, which was
already inside `#if 0`, was removed a month later.
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
None of the JITs is allowed to implement exit paths from the BPF
insn mappings other than BPF_JMP | BPF_EXIT. In the BPF core code
we have a couple of rewrites in eBPF (e.g. LD_ABS / LD_IND) and
in eBPF to cBPF translation to retain old existing behavior where
exceptions may occur; they are also tightly controlled by the
verifier where it disallows some of the features such as BPF to
BPF calls when legacy LD_ABS / LD_IND ops are present in the BPF
program. During recent review of all BPF_XADD JIT implementations
I noticed that the ppc64 one is buggy in that it contains two
jumps to exit paths. This is problematic as this can bypass verifier
expectations e.g. pointed out in commit f6b1b3bf0d ("bpf: fix
subprog verifier bypass by div/mod by 0 exception"). The first
exit path is obsoleted by the fix in ca36960211 ("bpf: allow xadd
only on aligned memory") anyway, and for the second one we need to
do a fetch, add and store loop if the reservation from lwarx/ldarx
was lost in the meantime.
Fixes: 156d0e290e ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The threshold at which it becomes more efficient to coalesce a range
of ATSDs into a single per-PID ATSD is currently not well understood
due to a lack of real-world work loads. This patch adds a debugfs
parameter allowing the threshold to be altered at runtime in order to
aid future development and refinement of the value.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the comment to account for the spurious interrupt number. The
code was already accounting for it, but that was unclear because it
was achieved by mpic_setup_error_int() knowing that the number it was
passed was the last used vector, rather than the first free vector.
So change the meaning of the argument to the first free vector and
update the caller to pass 13, instead of 12, to achieve the same
result.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The HUGEPD_*_SHIFT macros are always defined to be PGDIR_SHIFT and
PUD_SHIFT, and have to have those values to work properly. They once used
to have different values, but that was really only because they were used
to mean different things in different contexts.
6fa50483 "powerpc/mm/hugetlb: initialize the pagetable cache correctly for
hugetlb" removed that double meaning, but left the now useless constants.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add MODULE_LICENSE() to the chrp nvram.c driver to fix the build
warning message:
WARNING: modpost: missing MODULE_LICENSE() in arch/powerpc/platforms/chrp/nvram.o
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
NULL pointers are pointers to user memory space. So user pagetable
has to be set in order to avoid random behaviour in case of NULL
pointer dereference, otherwise we may encounter random memory
access hence Machine Check Exception from TLB Miss handlers.
Set user pagetable as early as possible in order to properly
catch early kernel NULL pointer dereference.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge in some commits we're sharing with the KVM tree.
I manually propagated the change from commit d3d4ffaae4
("powerpc/powernv/ioda2: Reduce upper limit for DMA window size") into
pci-ioda-tce.c.
Conflicts:
arch/powerpc/include/asm/cputable.h
arch/powerpc/platforms/powernv/pci-ioda.c
arch/powerpc/platforms/powernv/pci.h
On 64-bit servers, SPRN_SPRG3 and its userspace read-only mirror
SPRN_USPRG3 are used as userspace VDSO write and read registers
respectively.
SPRN_SPRG3 is lost when we enter stop4 and above, and is currently not
restored. As a result, any read from SPRN_USPRG3 returns zero on an
exit from stop4 (Power9 only) and above.
Thus in this situation, on POWER9, any call from sched_getcpu() always
returns zero, as on powerpc, we call __kernel_getcpu() which relies
upon SPRN_USPRG3 to report the CPU and NUMA node information.
Fix this by restoring SPRN_SPRG3 on wake up from a deep stop state
with the sprg_vdso value that is cached in PACA.
Fixes: e1c1cfed54 ("powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some of the assembly files use instructions specific to BookE or E500,
which are rejected with the now-default -mcpu=powerpc, so we must pass
-me500 to the assembler just as we pass -me200 for E200.
Fixes: 4bf4f42a2f ("powerpc/kbuild: Set default generic machine type for 32-bit compile")
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A VM which has:
- a DMA capable device passed through to it (eg. network card);
- running a malicious kernel that ignores H_PUT_TCE failure;
- capability of using IOMMU pages bigger that physical pages
can create an IOMMU mapping that exposes (for example) 16MB of
the host physical memory to the device when only 64K was allocated to the VM.
The remaining 16MB - 64K will be some other content of host memory, possibly
including pages of the VM, but also pages of host kernel memory, host
programs or other VMs.
The attacking VM does not control the location of the page it can map,
and is only allowed to map as many pages as it has pages of RAM.
We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that
an IOMMU page is contained in the physical page so the PCI hardware won't
get access to unassigned host memory; however this check is missing in
the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and
did not hit this yet as the very first time when the mapping happens
we do not have tbl::it_userspace allocated yet and fall back to
the userspace which in turn calls VFIO IOMMU driver, this fails and
the guest does not retry,
This stores the smallest preregistered page size in the preregistered
region descriptor and changes the mm_iommu_xxx API to check this against
the IOMMU page size.
This calculates maximum page size as a minimum of the natural region
alignment and compound page size. For the page shift this uses the shift
returned by find_linux_pte() which indicates how the page is mapped to
the current userspace - if the page is huge and this is not a zero, then
it is a leaf pte and the page is mapped within the range.
Fixes: 121f80ba68 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The constants are 64bit but not explicitly declared UL resulting
in sparse warnings. Fix this by declaring the constants UL.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The call to of_find_compatible_node() is returning a pointer with
incremented refcount so it must be explicitly decremented after the
last use. As here it is only being used for checking of node presence
but the result is not actually used in the success path it can be
dropped immediately.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit f725758b89 ("KVM: PPC: Book3S HV: Use OPAL XICS emulation on POWER9")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When attaching a hardware table to LIOBN in KVM, we match table parameters
such as page size, table offset and table size. However the tables are
created via very different paths - VFIO and KVM - and the VFIO path goes
through the platform code which has minimum TCE page size requirement
(which is 4K but since we allocate memory by pages and cannot avoid
alignment anyway, we align to 64k pages for powernv_defconfig).
So when we match the tables, one might be bigger that the other which
means the hardware table cannot get attached to LIOBN and DMA mapping
fails.
This removes the table size alignment from the guest visible table.
This does not affect the memory allocation which is still aligned -
kvmppc_tce_pages() takes care of this.
This relaxes the check we do when attaching tables to allow the hardware
table be bigger than the guest visible table.
Ideally we want the KVM table to cover the same space as the hardware
table does but since the hardware table may use multiple levels, and
all levels must use the same table size (IODA2 design), the area it can
actually cover might get very different from the window size which
the guest requested, even though the guest won't map it all.
Fixes: ca1fc489cf "KVM: PPC: Book3S: Allow backing bigger guest IOMMU pages with smaller physical pages"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Originally PPC KVM MMIO emulation uses only 0~31#(5 bits) for VSR
reg number, and use mmio_vsx_tx_sx_enabled field together for
0~63# VSR regs.
Currently PPC KVM MMIO emulation is reimplemented with analyse_instr()
assistance. analyse_instr() returns 0~63 for VSR register number, so
it is not necessary to use additional mmio_vsx_tx_sx_enabled field
any more.
This patch extends related reg bits (expand io_gpr to u16 from u8
and use 6 bits for VSR reg#), so that mmio_vsx_tx_sx_enabled can
be removed.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 8370edea81 ("bin2c: move bin2c in scripts/basic") moved bin2c
to the scripts/basic/ directory, incorrectly stating "Kexec wants to
use bin2c and it wants to use it really early in the build process.
See arch/x86/purgatory/ code in later patches."
Commit bdab125c93 ("Revert "kexec/purgatory: Add clean-up for
purgatory directory"") and commit d6605b6bbe ("x86/build: Remove
unnecessary preparation for purgatory") removed the redundant
purgatory build magic entirely.
That means that the move of bin2c was unnecessary in the first place.
fixdep is the only host program that deserves to sit in the
scripts/basic/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The recent change to add printf annotations to xmon inadvertently made
the disassembly output ugly, eg:
c00000002001e058 7ee00026 mfcr r23
c00000002001e05c fffffffffae101a0 std r23,416(r1)
c00000002001e060 fffffffff8230000 std r1,0(r3)
The problem being that negative 32-bit values are being displayed in
full 64-bits.
The printf conversion was actually correct, we are passing unsigned
long so it should use "lx". But powerpc instructions are only 4 bytes
and the code only reads 4 bytes, so inst should really just be
unsigned int, and that also fixes the printing to look the way we
want:
c00000002001e058 7ee00026 mfcr r23
c00000002001e05c fae101a0 std r23,416(r1)
c00000002001e060 f8230000 std r1,0(r3)
Fixes: e70d8f5526 ("powerpc/xmon: Add __printf annotation to xmon_printf()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment we allocate the entire TCE table, twice (hardware part and
userspace translation cache). This normally works as we normally have
contigous memory and the guest will map entire RAM for 64bit DMA.
However if we have sparse RAM (one example is a memory device), then
we will allocate TCEs which will never be used as the guest only maps
actual memory for DMA. If it is a single level TCE table, there is nothing
we can really do but if it a multilevel table, we can skip allocating
TCEs we know we won't need.
This adds ability to allocate only first level, saving memory.
This changes iommu_table::free() to avoid allocating of an extra level;
iommu_table::set() will do this when needed.
This adds @alloc parameter to iommu_table::exchange() to tell the callback
if it can allocate an extra level; the flag is set to "false" for
the realmode KVM handlers of H_PUT_TCE hcalls and the callback returns
H_TOO_HARD.
This still requires the entire table to be counted in mm::locked_vm.
To be conservative, this only does on-demand allocation when
the usespace cache table is requested which is the case of VFIO.
The example math for a system replicating a powernv setup with NVLink2
in a guest:
16GB RAM mapped at 0x0
128GB GPU RAM window (16GB of actual RAM) mapped at 0x244000000000
the table to cover that all with 64K pages takes:
(((0x244000000000 + 0x2000000000) >> 16)*8)>>20 = 4556MB
If we allocate only necessary TCE levels, we will only need:
(((0x400000000 + 0x400000000) >> 16)*8)>>20 = 4MB (plus some for indirect
levels).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This moves actual pages allocation to a separate function which is going
to be reused later in on-demand TCE allocation.
While we are at it, remove unnecessary level size round up as the caller
does this already.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We want to support sparse memory and therefore huge chunks of DMA windows
do not need to be mapped. If a DMA window big enough to require 2 or more
indirect levels, and a DMA window is used to map all RAM (which is
a default case for 64bit window), we can actually save some memory by
not allocation TCE for regions which we are not going to map anyway.
The hardware tables alreary support indirect levels but we also keep
host-physical-to-userspace translation array which is allocated by
vmalloc() and is a flat array which might use quite some memory.
This converts it_userspace from vmalloc'ed array to a multi level table.
As the format becomes platform dependend, this replaces the direct access
to it_usespace with a iommu_table_ops::useraddrptr hook which returns
a pointer to the userspace copy of a TCE; future extension will return
NULL if the level was not allocated.
This should not change non-KVM handling of TCE tables and it_userspace
will not be allocated for non-KVM tables.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are going to reuse multilevel TCE code for the userspace copy of
the TCE table and since it is big endian, let's make the copy big endian
too.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Right now we have allocation code in pci-ioda.c and traversing code in
pci.c, let's keep them toghether. However both files are big enough
already so let's move this business to a new file.
While we at it, move the code which links IOMMU table groups to
IOMMU tables as it is not specific to any PNV PHB model.
These puts exported symbols from the new file together.
This fixes several warnings from checkpatch.pl like this:
"WARNING: Prefer 'unsigned int' to bare use of 'unsigned'".
As this is almost cut-n-paste, there should be no behavioral change.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This gets rid of a useless wrapper around
pnv_pci_ioda2_table_free_pages().
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 was never a product. It is no longer supported by upstream
firmware, and it is not effectively supported in Linux due to lack of
testing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Remove arch_make_huge_pte() entirely]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some of the comments in the perf events code use articles incorrectly,
using 'a' for words beginning with a vowel sound, where 'an' should be
used.
Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com
[ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace msleep(x) with with msleep(OPAL_BUSY_DELAY_MS) to document
these sleeps are to wait for opal (firmware).
Signed-off-by: Daniel Klamt <eleon@ele0n.de>
Signed-off-by: Bjoern Noetel <bjoern@br3ak3r.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we take an SLB multi-hit on bare metal, we see both the multi-hit
and parity error bits set in DSISR. The user manuals indicates this is
expected to always happen on Power8, whereas on Power9 it says a
multi-hit will "usually" also cause a parity error.
We decide what to do based on the various error tables in mce_power.c,
and because we process them in order and only report the first, we
currently always report a parity error but not the multi-hit, eg:
Severe Machine check interrupt [Recovered]
Initiator: CPU
Error type: SLB [Parity]
Effective address: c000000ffffd4300
Although this is correct, it leaves the user wondering why they got a
parity error. It would be clearer instead if we reported the
multi-hit because that is more likely to be simply a software bug,
whereas a true parity error is possibly an indication of a bad core.
We can do that simply by reordering the error tables so that multi-hit
appears before parity. That doesn't affect the error recovery at all,
because we flush the SLB either way.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This was added to support an early version of Power8 that did not have
working doorbells. These machines were not publicly available, and all of
the internal users have long since upgraded.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Using 'at24' as fallback is now deprecated - use the full
'atmel,<model>' string.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Using compatible strings without the <manufacturer> part for at24 is
now deprecated. Use a correct 'atmel,<model>' value.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Using 'at' as the <manufacturer> part of the compatible string is now
deprecated. Use a correct string: 'atmel,<model>'.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH. But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the shash algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable kernel XZ compression option on BOOK3S_32. Tested on G4
PowerBook.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
[mpe: Use one select under the PPC symbol guarded by if PPC_BOOK3S]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The sketchy bypass uses 256M pages so add this page size as well.
This should cause no behavioral change but will be used later.
Fixes: 477afd6ea6 "powerpc/ioda: Use ibm,supported-tce-sizes for IOMMU page size mask"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Memory reservation for crashkernel could fail if there are holes around
kdump kernel offset (128M). Fail gracefully in such cases and print an
error message.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: David Gibson <dgibson@redhat.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the quest to remove all stack VLA usage from the kernel[1], this
switches to using a stack size large enough for the saved routine and
adds a sanity check making sure the routine doesn't overflow into the
0x600 exception handler.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Simple overlapping changes in stmmac driver.
Adjust skb_gro_flush_final_remcsum function signature to make GRO list
changes in net-next, as per Stephen Rothwell's example merge
resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove abandonned capi support for the Mellanox CX4.
This reverts commit 4361b03430.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove abandonned capi support for the Mellanox CX4.
This reverts commit a2f67d5ee8.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
debugfs doesn't support mmap(), so this code is never used.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We use PHB in mode1 which uses bit 59 to select a correct DMA window.
However there is mode2 which uses bits 59:55 and allows up to 32 DMA
windows per a PE.
Even though documentation does not clearly specify that, it seems that
the actual hardware does not support bits 59:55 even in mode1, in other
words we can create a window as big as 1<<58 but DMA simply won't work.
This reduces the upper limit from 59 to 55 bits to let the userspace know
about the hardware limits.
Fixes: 7aafac11e3 "powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 59f47eff03 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper")
removed the 'oirq' variable, but kept memsetting it when the DEBUG macro is
defined.
When setting DEBUG macro for debugging purpose, the kernel fails to build since
'oirq' is not defined anymore.
This patch simply remove the debug block, since it does not seem to sense
now.
Fixes: 59f47eff03 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The workaround has been removed. What stays is just code to find the
memory hole so the BATs can be configured properly in the function below.
Fixes: 57deb8fea0 ("powerpc/wii: Don't rely on the reserved memory hack")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
get_monotonic_boottime() is deprecated, and may not be safe to call in
every context, as it has to read a hardware clocksource.
This changes xmon to print the time using ktime_get_coarse_boottime64()
instead, which avoids the old timespec type and the HW access.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Due to recent refactoring in EEH in:
commit b9fde58db7 ("powerpc/powernv: Rework EEH initialization on
powernv")
a misleading message was seen in the kernel message buffer:
[ 0.108431] EEH: PowerNV platform initialized
[ 0.589979] EEH: No capable adapters found
This happened due to the removal of the initialization delay for powernv
platform.
Even though the EEH infrastructure for the devices is eventually
initialized and still works just fine the eeh device probe step is
postponed in order to assure the PEs are created. Later
pnv_eeh_post_init does the probe devices job but at that point the
message was already shown right after eeh_init flow.
This patch introduces a new flag EEH_POSTPONED_PROBE to represent that
temporary state and avoid the message mentioned above and showing the
follow one instead:
[ 0.107724] EEH: PowerNV platform initialized
[ 4.844825] EEH: PCI Enhanced I/O Error Handling Enabled
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Tested-by:Venkat Rao B <vrbagal1@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- introduce __diag_* macros and suppress -Wattribute-alias warnings from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbN450AAoJED2LAQed4NsGFdAP/0fc2NhkzQMvz1EBEc2n93LC
FUXew75tsX2ZewssoLzb4Iepkb/mHU+fjhBaE65S+Xu2/6mNfId9a7HAtywvFyO2
ZUQPXHjMHnLEPRKuzQy34uCy9/wWCiqi8rpWUsOEohmNIcLaF0vMZf5Ifod7wIr7
pnix3b9Q+dY+l49TSsSv4MX7F9qs5fXRhEarcQ3jYEb3yRUEXgmli3hV1wRita/n
tJhFDiIdJDeISDkgmHUuOhjFnv5Yf3WJTXi/ILZ2zvpGjjqNDAwxtyzGnPMShQEc
fxk3/1nkg9h/ScVAaGavrYYmiiH8XsqWY2q6p52jTK3kD+yTXaVakPSmxw8UHImh
aNWQutzMF8GYEsb+ld1ncsNrwfgd40mA25mEyb/ZPSw2IdNBrXtIVbw7XiBLi8eH
recAlRN0MouzD7+sXafgtoKopqanQbB/rMqDO4ULfnVvZLWDmZVbfreCc+qrJtiJ
mqydBMUVxrvB+qf5SHQ7WlDmXWHY1xQuxXzS0gRVGT14EsyD6yhC2D62pEHnB7uG
zE1pGemOCzOlGY6nDAbtQVR1n5AAWEZYveZXUuFn+vuqR7ZtYxCFUFOS0u621zFI
HMI9B81ifdNV2efT2VTVi6Tnnvn44sAXOYjaULX6566EyX0/mOL5CWZlTqn5SKOn
PwNxc7ZeCylTbkZww2c4
=oABr
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- introduce __diag_* macros and suppress -Wattribute-alias warnings
from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
* tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: loop boundary condition fix
kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
kconfig: handle P_SYMBOL in print_symbol()
kconfig: document Kconfig source file comments
kconfig: fix line numbers for if-entries in menu tree
stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
powerpc: Remove -Wattribute-alias pragmas
disable -Wattribute-alias warning for SYSCALL_DEFINEx()
kbuild: add macro for controlling warnings to linux/compiler.h
Two regression fixes, and a new syscall wire-up.
A fix for the recent conversion to time64_t in the powermac RTC routines, which
caused time to go backward.
Another fix for fallout from the split PMD PTL conversion.
Wire up the new io_pgetevents() syscall.
Thanks to:
Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=kHJC
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two regression fixes, and a new syscall wire-up:
- A fix for the recent conversion to time64_t in the powermac RTC
routines, which caused time to go backward.
- Another fix for fallout from the split PMD PTL conversion.
- Wire up the new io_pgetevents() syscall.
Thanks to: Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu
Malaterre"
* tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powermac: Fix rtc read/write functions
powerpc/mm/32: Fix pgtable_page_dtor call
powerpc: Wire up io_pgetevents
As Mathieu pointed out, my conversion to time64_t was incorrect and
resulted in negative times to be read from the RTC. The problem is
that during the conversion from a byte array to a time64_t, the
'unsigned char' variable holding the top byte gets turned into a
negative signed 32-bit integer before being assigned to the 64-bit
variable for any times after 1972.
This changes the logic to cast to an unsigned 32-bit number first for
the Macintosh time and then convert that to the Unix time, which then
gives us a time in the documented 1904..2040 year range. I decided not
to use the longer 1970..2106 range that other drivers use, for
consistency with the literal interpretation of the register, but that
could be easily changed if we decide we want to support any Mac after
2040.
Just to be on the safe side, I'm also adding a WARN_ON that will
trigger if either the year 2040 has come and is observed by this
driver, or we run into an RTC that got set back to a pre-1970 date for
some reason (the two are indistinguishable).
For the RTC write functions, Andreas found another problem: both
pmu_request() and cuda_request() are varargs functions, so changing
the type of the arguments passed into them from 32 bit to 64 bit
breaks the API for the set_rtc_time functions. This changes it back to
32 bits.
The same code exists in arch/m68k/ and is patched in an identical way
now in a separate patch.
Fixes: 5bfd643583 ("powerpc: use time64_t in read_persistent_clock")
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 667416f385 ("powerpc/mm: Fix kernel crash on page table free")
added a call for pgtable_page_dtor in the rcu page table free routine. We missed
the fact that for 32 bit platforms we did call the 'dtor' early. Drop the extra
call for pgtable_page_dtor. We remove the call from __pte_free_tlb so that we
do the page table free and 'dtor' call together. This should help when we
switch these platforms to pte fragments.
Fixes: 667416f385 ("powerpc/mm: Fix kernel crash on page table free")
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch is to move ptp timer node out of fman.
Because ptp timer will be probed by ptp_qoriq driver,
it should be an independent device in case of conflict
memory mapping.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All architectures have implemented it, we can now remove the poor weak
version.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-11-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Migrate to the new API in order to remove arch_validate_hwbkpt_settings()
that clumsily mixes up architecture validation and commit
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-5-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We can't pass the breakpoint directly on arch_check_bp_in_kernelspace()
anymore because its architecture internal datas (struct arch_hw_breakpoint)
are not yet filled by the time we call the function, and most
implementation need this backend to be up to date. So arrange the
function to take the probing struct instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With SYSCALL_DEFINEx() disabling -Wattribute-alias generically, there's
no need to duplicate that for PowerPC syscalls.
This reverts commit 4155203739 ("powerpc: fix build failure by
disabling attribute-alias warning in pci_32") and commit 2479bfc9bc
("powerpc: Fix build by disabling attribute-alias warning for
SYSCALL_DEFINEx").
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull rseq fixes from Thomas Gleixer:
"A pile of rseq related fixups:
- Prevent infinite recursion when delivering SIGSEGV
- Remove the abort of rseq critical section on fork() as syscalls
inside rseq critical sections are explicitely forbidden. So no
point in doing the abort on the child.
- Align the rseq structure on 32 bytes in the ARM selftest code.
- Fix file permissions of the test script"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Avoid infinite recursion when delivering SIGSEGV
rseq/cleanup: Do not abort rseq c.s. in child on fork()
rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes
rseq/selftests: Make run_param_test.sh executable
Wire up io_pgetevents system call on powerpc.
io_pgetevents is a new syscall to read asynchronous I/O events from the
completion queue.
Tested with libaio branch aio-poll[1] and the io_pgetevents test (#22) passed
on both ppc64 LE and BE modes.
[1] https://pagure.io/libaio/branch/aio-poll
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When delivering a signal to a task that is using rseq, we call into
__rseq_handle_notify_resume() so that the registers pushed in the
sigframe are updated to reflect the state of the restartable sequence
(for example, ensuring that the signal returns to the abort handler if
necessary).
However, if the rseq management fails due to an unrecoverable fault when
accessing userspace or certain combinations of RSEQ_CS_* flags, then we
will attempt to deliver a SIGSEGV. This has the potential for infinite
recursion if the rseq code continuously fails on signal delivery.
Avoid this problem by using force_sigsegv() instead of force_sig(), which
is explicitly designed to reset the SEGV handler to SIG_DFL in the case
of a recursive fault. In doing so, remove rseq_signal_deliver() from the
internal rseq API and have an optional struct ksignal * parameter to
rseq_handle_notify_resume() instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: peterz@infradead.org
Cc: paulmck@linux.vnet.ibm.com
Cc: boqun.feng@gmail.com
Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com
The conditional inc/dec ops differ for atomic_t and atomic64_t:
- atomic_inc_unless_positive() is optional for atomic_t, and doesn't exist for atomic64_t.
- atomic_dec_unless_negative() is optional for atomic_t, and doesn't exist for atomic64_t.
- atomic_dec_if_positive is optional for atomic_t, and is mandatory for atomic64_t.
Let's make these consistently optional for both. At the same time, let's
clean up the existing fallbacks to use atomic_try_cmpxchg().
The instrumented atomics are updated accordingly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-18-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Many of the inc/dec ops are mandatory, but for most architectures inc/dec are
simply trivial wrappers around their corresponding add/sub ops.
Let's make all the inc/dec ops optional, so that we can get rid of these
boilerplate wrappers.
The instrumented atomics are updated accordingly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-17-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the atomics return the result of a test applied after the atomic
operation, and almost all architectures implement these as trivial
wrappers around the underlying atomic. Specifically:
* <atomic>_inc_and_test(v) is (<atomic>_inc_return(v) == 0)
* <atomic>_dec_and_test(v) is (<atomic>_dec_return(v) == 0)
* <atomic>_sub_and_test(i, v) is (<atomic>_sub_return(i, v) == 0)
* <atomic>_add_negative(i, v) is (<atomic>_add_return(i, v) < 0)
Rather than have these definitions duplicated in all architectures, with
minor inconsistencies in formatting and documentation, let's make these
operations optional, with default fallbacks as above. Implementations
must now provide a preprocessor symbol.
The instrumented atomics are updated accordingly.
Both x86 and m68k have custom implementations, which are left as-is,
given preprocessor symbols to avoid being overridden.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-16-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As a step towards unifying the atomic/atomic64/atomic_long APIs, this
patch converts the arch/powerpc implementation of atomic64_add_unless()
into an implementation of atomic64_fetch_add_unless().
A wrapper in <linux/atomic.h> will build atomic_add_unless() atop of
this, provided it is given a preprocessor definition.
No functional change is intended as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-13-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Several architectures these have a near-identical implementation based
on atomic_read() and atomic_cmpxchg() which we can instead define in
<linux/atomic.h>, so let's do so, using something close to the existing
x86 implementation with try_cmpxchg().
Where an architecture provides its own atomic_fetch_add_unless(), it
must define a preprocessor symbol for it. The instrumented atomics are
updated accordingly.
Note that arch/arc's existing atomic_fetch_add_unless() had redundant
barriers, as these are already present in its atomic_cmpxchg()
implementation.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Link: https://lore.kernel.org/lkml/20180621121321.4761-7-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We define a trivial fallback for atomic_inc_not_zero(), but don't do
the same for atomic64_inc_not_zero(), leading most architectures to
define the same boilerplate.
Let's add a fallback in <linux/atomic.h>, and remove the redundant
implementations. Note that atomic64_add_unless() is always defined in
<linux/atomic.h>, and promotes its arguments to the requisite types, so
we need not do this explicitly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-6-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While __atomic_add_unless() was originally intended as a building-block
for atomic_add_unless(), it's now used in a number of places around the
kernel. It's the only common atomic operation named __atomic*(), rather
than atomic_*(), and for consistency it would be better named
atomic_fetch_add_unless().
This lack of consistency is slightly confusing, and gets in the way of
scripting atomics. Given that, let's clean things up and promote it to
an official part of the atomics API, in the form of
atomic_fetch_add_unless().
This patch converts definitions and invocations over to the new name,
including the instrumented version, using the following script:
----
git grep -w __atomic_add_unless | while read line; do
sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}";
done
git grep -w __arch_atomic_add_unless | while read line; do
sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}";
done
----
Note that we do not have atomic{64,_long}_fetch_add_unless(), which will
be introduced by later patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Clear current_kprobe and enable preemption in kprobe
even if pre_handler returns !0.
This simplifies function override using kprobes.
Jprobe used to require to keep the preemption disabled and
keep current_kprobe until it returned to original function
entry. For this reason kprobe_int3_handler() and similar
arch dependent kprobe handers checks pre_handler result
and exit without enabling preemption if the result is !0.
After removing the jprobe, Kprobes does not need to
keep preempt disabled even if user handler returns !0
anymore.
But since the function override handler in error-inject
and bpf is also returns !0 if it overrides a function,
to balancing the preempt count, it enables preemption
and reset current kprobe by itself.
That is a bad design that is very buggy. This fixes
such unbalanced preempt-count and current_kprobes setting
in kprobes, bpf and error-inject.
Note: for powerpc and x86, this removes all preempt_disable
from kprobe_ftrace_handler because ftrace callbacks are
called under preempt disabled.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Don't call the ->break_handler() from the powerpc kprobes code,
because it was only used by jprobes which got removed.
This also removes skip_singlestep() and embeds it in the
caller, kprobe_ftrace_handler(), which simplifies regs->nip
operation around there.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-arch@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/lkml/152942477127.15209.8982613703787878618.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/powerpc. This also reverts commits
related __is_active_jprobe() function.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-arch@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/lkml/152942445234.15209.12868722778364739753.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With 4k page size for hugetlb we allocate hugepage directories from its on slab
cache. With patch 0c4d26802 ("powerpc/book3s64/mm: Simplify the rcu callback for page table free")
we missed to free these allocated hugepd tables.
Update pgtable_free to handle hugetlb hugepd directory table.
Fixes: 0c4d268029 ("powerpc/book3s64/mm: Simplify the rcu callback for page table free")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Add CONFIG_HUGETLB_PAGE guard to fix build break]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If possible CPUs are limited (e.g., by kexec), then the kvm prefetch
workaround function can access the paca pointer for a !possible CPU.
Fixes: d2e60075a3 ("powerpc/64: Use array of paca pointers and allocate pacas individually")
Cc: stable@kernel.org
Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Tested-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
I broke the build when CONFIG_NMI_IPI=n with my recent commit to add
arch_trigger_cpumask_backtrace(), eg:
stacktrace.c:(.text+0x1b0): undefined reference to `.smp_send_safe_nmi_ipi'
We should rework the CONFIG symbols here in future to avoid these
double barrelled ifdefs but for now they fix the build.
Fixes: 5cc05910f2 ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()")
Reported-by: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Similar to previous patches, hard disable interrupts when a CPU is
in panic. This reduces the chance the watchdog has to interfere with
the panic, and avoids any other type of masked interrupt being
executed when crashing which minimises the length of the crash path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Marking CPUs stopped by smp_send_stop as offline can cause warnings
due to cross-CPU wakeups. This trace was noticed on a busy system
running a sysrq+c crash test, after the injected crash:
WARNING: CPU: 51 PID: 1546 at kernel/sched/core.c:1179 set_task_cpu+0x22c/0x240
CPU: 51 PID: 1546 Comm: kworker/u352:1 Tainted: G D
Workqueue: mlx5e mlx5e_update_stats_work [mlx5_core]
[...]
NIP [c00000000017c21c] set_task_cpu+0x22c/0x240
LR [c00000000017d580] try_to_wake_up+0x230/0x720
Call Trace:
[c000000001017700] runqueues+0x0/0xb00 (unreliable)
[c00000000017d580] try_to_wake_up+0x230/0x720
[c00000000015a214] insert_work+0x104/0x140
[c00000000015adb0] __queue_work+0x230/0x690
[c000003fc5007910] [c00000000015b26c] queue_work_on+0x5c/0x90
[c0080000135fc8f8] mlx5_cmd_exec+0x538/0xcb0 [mlx5_core]
[c008000013608fd0] mlx5_core_access_reg+0x140/0x1d0 [mlx5_core]
[c00800001362777c] mlx5e_update_pport_counters.constprop.59+0x6c/0x90 [mlx5_core]
[c008000013628868] mlx5e_update_ndo_stats+0x28/0x90 [mlx5_core]
[c008000013625558] mlx5e_update_stats_work+0x68/0xb0 [mlx5_core]
[c00000000015bcec] process_one_work+0x1bc/0x5f0
[c00000000015ecac] worker_thread+0xac/0x6b0
[c000000000168338] kthread+0x168/0x1b0
[c00000000000b628] ret_from_kernel_thread+0x5c/0xb4
This happens because firstly the CPU is not really offline in the
usual sense, processes and interrupts have not been migrated away.
Secondly smp_send_stop does not happen atomically on all CPUs, so
one CPU can have marked itself offline, while another CPU is still
running processes or interrupts which can affect the first CPU.
Fix this by just not marking the CPU as offline. It's more like
frozen in time, so offline does not really reflect its state properly
anyway. There should be nothing in the crash/panic path that walks
online CPUs and synchronously waits for them, so this change should
not introduce new hangs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Similarly to commit 855bfe0de1 ("powerpc: hard disable irqs in
smp_send_stop loop"), irqs should be hard disabled by
panic_smp_self_stop.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the device tree CPU features quirk code we want to set
CPU_FTR_POWER9_DD2_1 on all Power9s that aren't DD2.0 or earlier. But
we got the logic wrong and instead set it on all CPUs that aren't
Power9 DD2.0 or earlier, ie. including Power8.
Fix it by making sure we're on a Power9. This isn't a bug in practice
because the only code that checks the feature is Power9 only to begin
with. But we'll backport it anyway to avoid confusion.
Fixes: 9e9626ed3a ("powerpc/64s: Fix POWER9 DD2.2 and above in DT CPU features")
Cc: stable@vger.kernel.org # v4.17+
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The patch 99baac21e4 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss
problem") added a force flush mode to the mmu_gather flush, which
unconditionally flushes the entire address range being invalidated
(even if actual ptes only covered a smaller range), to solve a problem
with concurrent threads invalidating the same PTEs causing them to
miss TLBs that need flushing.
This does not work with powerpc that invalidates mmu_gather batches
according to page size. Have powerpc flush all possible page sizes in
the range if it encounters this concurrency condition.
Patch 4647706ebe ("mm: always flush VMA ranges affected by
zap_page_range") does add a TLB flush for all page sizes on powerpc for
the zap_page_range case, but that is to be removed and replaced with
the mmu_gather flush to avoid redundant flushing. It is also thought to
not cover other obscure race conditions:
https://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com
Hash does not have a problem because it invalidates TLBs inside the
page table locks.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In binutils 2.26 a new opcode for the "wait" instruction was added for the
POWER9 and has precedence over the one specific to the e500mc. Commit
ebf714ff37 ("powerpc/e500mc: Add support for the wait instruction in
e500_idle") uses this instruction specifically on the e500mc to work around
an erratum.
This results in an invalid instruction in idle_e500 when we build for the
e500mc on bintutils >= 2.26 with the default assembler machine type.
Since multiplatform between e500 and non-e500 is not supported, set the
assembler machine type globaly when CONFIG_PPC_E500MC=y.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
CC: Kumar Gala <galak@kernel.crashing.org>
CC: Vakul Garg <vakul.garg@nxp.com>
CC: Scott Wood <swood@redhat.com>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
for the hyperv config issue and a typo fix.
Main PPC changes: reimplement the MMIO instruction emulation,
transactional memory support for PR KVM, improve radix page table
handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbIp2DAAoJEL/70l94x66DdZwH/jAI259VXA3VJJZ21mMLry4m
8uL28N/zYgiokPnzE9/BoP3o48ksYGdrJcvIUgHScTNHrMdMGTv/wkvExEzQ+j9Z
orCVF46zyGFA1KevEaEfTCrTsUO2HX7kCeZou7J8F37YdxgEqEOIoa6ozC+XVrB5
q75KnnIqizM5Hi5+kdCEPiBZ1Qzy+F8kXtg4OqXSEOubiyxXvTmkC65sUBrEzleW
uGHB4qNJ0bpLZAeKrrh2yDwhqR3Dw3Mqz97mA4CygfWm1BjQsPpO8u80NtXr2gW5
iB3hB7RvzlRpzVHxaKAiKu+DAQWkhiEGPAolWGuQ5mFm1V31qw7UO/TDylKSXZk=
=keBY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Mostly the PPC part of the release, but also switching to Arnd's fix
for the hyperv config issue and a typo fix.
Main PPC changes:
- reimplement the MMIO instruction emulation
- transactional memory support for PR KVM
- improve radix page table handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits)
KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV
KVM: x86: fix typo at kvm_arch_hardware_setup comment
KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation
KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode
KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit
KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation
KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts
KVM: PPC: Book3S PR: Handle additional interrupt types
KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers
KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS
KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl
KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl
KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl
KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM
KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state
KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state
KVM: PPC: Book3S PR: Add emulation for trechkpt.
KVM: PPC: Book3S PR: Add emulation for treclaim.
KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs
KVM: PPC: Book3S PR: Always fail transactions in guest privileged state
...
With PHYS_ADDR_MAX there is now a type safe variant for all bits set.
Make use of it.
Patch created using a semantic patch as follows:
// <smpl>
@@
typedef phys_addr_t;
@@
-(phys_addr_t)ULLONG_MAX
+PHYS_ADDR_MAX
// </smpl>
Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and
clean-up Makefile
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VABv
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and clean-up
Makefile
- misc cleanups
* tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
kconfig: fix localmodconfig
sh: remove no-op macro VMLINUX_SYMBOL()
powerpc/kbuild: move -mprofile-kernel check to Kconfig
Documentation: kconfig: add recommended way to describe compiler support
gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
gcc-plugins: test plugin support in Kconfig and clean up Makefile
gcc-plugins: move GCC version check for PowerPC to Kconfig
kcov: test compiler capability in Kconfig and correct dependency
gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
kconfig: add CC_IS_CLANG and CLANG_VERSION
kconfig: add CC_IS_GCC and GCC_VERSION
stack-protector: test compiler capability in Kconfig and drop AUTO mode
kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
tabort. will perform transaction failure recording and the recording
depends on TEXASR FS bit. Currently the TEXASR FS bit is retrieved
after tabort., when the TEXASR FS bit is already been updated by
tabort. itself.
This patch corrects this behavior by retrieving TEXASR val before
tabort.
tabort. will not immediately leads to transaction failure handling
in suspend state. So this patch also remove the mtspr on TEXASR/TFIAR
registers to avoid TM bad thing exception.
Fixes: 26798f88d5 ("KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state")
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
It turns out that PR KVM has no dependency on the format of HPTEs,
because it uses functions pointed to by mmu_hash_ops which do all
the formatting and interpretation of HPTEs. Thus we can allow PR
KVM to load on POWER9 bare-metal hosts as long as they are running
in HPT mode.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
PAPR guests run in supervisor mode and should not be able to set the
MSR HV (hypervisor mode) bit or clear the ME (machine check enable)
bit by mtmsrd or any other means. To enforce this, we force MSR_HV
off and MSR_ME on in kvmppc_set_msr_pr. Without this, the guest
can appear to be in hypervisor mode to itself and to userspace.
This has been observed to cause a crash in QEMU when it tries to
deliver a system reset interrupt to the guest.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The treclaim. emulation needs to record failure status in the TEXASR
register if the transaction had not previously failed. However, the
current code first does kvmppc_save_tm_pr() (which does a treclaim.
itself) and then checks the failure summary bit in TEXASR after that.
Since treclaim. itself causes transaction failure, the FS bit is
always set, so we were never updating TEXASR with the failure cause
supplied by the guest as the RA parameter to the treclaim. instruction.
This caused the tm-unavailable test in tools/testing/selftests/powerpc/tm
to fail.
To fix this, we need to read TEXASR before calling kvmppc_save_tm_pr(),
and base the final value of TEXASR on that value.
Fixes: 03c81682a9 ("KVM: PPC: Book3S PR: Add emulation for treclaim.")
Reviewed-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This makes sure that MSR "partial-function" bits are not transferred
to SRR1 when delivering an interrupt. This was causing failures in
guests running kernels that include commit f3d96e698e ("powerpc/mm:
Overhaul handling of bad page faults", 2017-07-19), which added code
to check bits of SRR1 on instruction storage interrupts (ISIs) that
indicate a bad page fault. The symptom was that a guest user program
that handled a signal and attempted to return from the signal handler
would get a SIGBUS signal and die.
The code that generated ISIs and some other interrupts would
previously set bits in the guest MSR to indicate the interrupt status
and then call kvmppc_book3s_queue_irqprio(). This technique no
longer works now that kvmppc_inject_interrupt() is masking off those
bits. Instead we make kvmppc_core_queue_data_storage() and
kvmppc_core_queue_inst_storage() call kvmppc_inject_interrupt()
directly, and make sure that all the places that generate ISIs or
DSIs call kvmppc_core_queue_{data,inst}_storage instead of
kvmppc_book3s_queue_irqprio().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds trivial handling for additional interrupt types that KVM-PR must
support for proper virtualization on a POWER9 host in HPT mode, as a further
prerequisite to enabling KVM-PR on that configuration.
Signed-off-by: Cameron Kaiser <spectre@floodgap.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
