Most of the commits are for additional hardware support and minor fixes
for existing machines for all the usual platforms: qcom, amlogic, at91,
gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip,
exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap,
and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation.
Andre Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into
dts files, for many devices that relied on a mix of auxiliary data
in addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants, along
with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on
the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=ye2F
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the commits are for additional hardware support and minor
fixes for existing machines for all the usual platforms: qcom,
amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
sunxi, broadcom, omap, and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation. Andre
Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into dts
files, for many devices that relied on a mix of auxiliary data in
addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants,
along with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
on the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"
* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
ARM: dts: ux500: Fix missing node renames
arm64: dts: Revert "specify console via command line"
MAINTAINERS: Update Calxeda Highbank maintainership
arm: dts: calxeda: Group port-phys and sgpio-gpio items
arm: dts: calxeda: Fix interrupt grouping
arm: dts: calxeda: Provide UART clock
arm: dts: calxeda: Basic DT file fixes
arm64: dts: specify console via command line
ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
ARM: dts: gemini: Add thermal zone to DIR-685
ARM: dts: gemini: Rename IDE nodes
ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
arm64: dts: khadas-vim3: add SPIFC controller node
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
Here is the big set of TTY / Serial patches for 5.7-rc1
Lots of console fixups and reworking in here, serial core tweaks
(doesn't that ever get old, why are we still creating new serial
devices?), serial driver updates, line-protocol driver updates, and some
vt cleanups and fixes included in here as well.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHT8w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl3CwCgj/97IKb4K49nV2rDgiV+t/ELWqUAnjBp+Zpd
H2BEdhwCFhq/5CJHKXWH
=JTm1
-----END PGP SIGNATURE-----
Merge tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of TTY / Serial patches for 5.7-rc1
Lots of console fixups and reworking in here, serial core tweaks
(doesn't that ever get old, why are we still creating new serial
devices?), serial driver updates, line-protocol driver updates, and
some vt cleanups and fixes included in here as well.
All have been in linux-next with no reported issues"
* tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits)
serial: 8250: Optimize irq enable after console write
serial: 8250: Fix rs485 delay after console write
vt: vt_ioctl: fix use-after-free in vt_in_use()
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
tty: serial: make SERIAL_SPRD depend on COMMON_CLK
tty: serial: fsl_lpuart: fix return value checking
tty: serial: fsl_lpuart: move dma_request_chan()
ARM: dts: tango4: Make /serial compatible with ns16550a
ARM: dts: mmp*: Make the serial ports compatible with xscale-uart
ARM: dts: mmp*: Fix serial port names
ARM: dts: mmp2-brownstone: Don't redeclare phandle references
ARM: dts: pxa*: Make the serial ports compatible with xscale-uart
ARM: dts: pxa*: Fix serial port names
ARM: dts: pxa*: Don't redeclare phandle references
serial: omap: drop unused dt-bindings header
serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs
serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA
serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info
serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()
serial: 8250: 8250_omap: Account for data in flight during DMA teardown
...
-----BEGIN PGP SIGNATURE-----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=Ve8R
-----END PGP SIGNATURE-----
Merge tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: imx219
- Support for some new pixelformats
- Support for Sun8i SoC
- Added more codecs to meson vdec driver
- Prepare for removing the legacy usbvision driver by moving it to
staging. This driver has issues and use legacy core APIs. If nobody
steps up to address those, it is time for its retirement.
- Several cleanups and improvements on drivers, with the addition of
new supported boards
* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
media: venus: firmware: Ignore secure call error on first resume
media: mtk-vpu: load vpu firmware from the new location
media: i2c: video-i2c: fix build errors due to 'imply hwmon'
media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
media: hantro: add initial i.MX8MQ support
media: dt-bindings: Document i.MX8MQ VPU bindings
media: vivid: fix incorrect PA assignment to HDMI outputs
media: hantro: Add linux-rockchip mailing list to MAINTAINERS
media: cedrus: h264: Fix 4K decoding on H6
media: siano: Use scnprintf() for avoiding potential buffer overflow
media: rc: Use scnprintf() for avoiding potential buffer overflow
media: allegro: create new struct for channel parameters
media: allegro: move mail definitions to separate file
media: allegro: pass buffers through firmware
media: allegro: verify source and destination buffer in VCU response
media: allegro: handle dependency of bitrate and bitrate_peak
media: allegro: read bitrate mode directly from control
media: allegro: make QP configurable
media: allegro: make frame rate configurable
media: allegro: skip filler data if possible
...
For the devicetree files, there are a total of 20 patches, almost
entirely for 32-bit machines:
- The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
both for correctness and for style that are addressed in separate
patches. This causes most of the changed lines of the DT updates
this time.
- More Allwinner updates fixing the identification of the security
system on sun8i/A33, a recent regression of the A83t ethernet, and a
few board specific issues on the TBS-A711 macine.
- Several bug fixes for OMAP dts files, most notably fixing the timings
for the NAND flash on the Nokia N900 that regressed a while ago after
the move to configuring them from DT. Some other OMAPs now set the
correct dma limits on the L3 bus, and a regression fix addresses lost
Ethernet on dm814x
- One incorrect setting in the newly added Raspberry Pi Zero W that
may cause issues with the SD card controller.
- A missing property on the bcm2835 firmware node caused incorrect
DMA settings.
- An old bug on the oxnas platform causing spurious interrupts is
finally addressed.
- A regression on the Exynos Midas board broke the OLED panel
power supply.
- The i.MX6 phycore SoM specified the wrong voltage for the SoC,
this is now set to the values from the datasheet.
- Some 64-bit machines use a deprecated string to identify the PSCI
firmware.
There are also several small code fixes addressing mostly serious
issues:
- Fix the sunxi rsb bus access to no longer return incorrect data when
mixing 8 and 16 bit I/O.
- Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
quirk in the ti-sysc driver
- Fix a NULL pointer access from a race in the fsl dpio driver
- Fix a v5.5 regression in the exynos-chipid driver that caused an
invalid error code probing the device on non-exynos platforms
- Fix an out-of-bounds access in the AMD TEE driver
-----BEGIN PGP SIGNATURE-----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=31+Z
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT and driver fixes from Arnd Bergmann:
"For the devicetree files, there are a total of 20 patches, almost
entirely for 32-bit machines:
- The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
both for correctness and for style that are addressed in separate
patches. This causes most of the changed lines of the DT updates
this time.
- More Allwinner updates fixing the identification of the security
system on sun8i/A33, a recent regression of the A83t ethernet, and
a few board specific issues on the TBS-A711 macine.
- Several bug fixes for OMAP dts files, most notably fixing the
timings for the NAND flash on the Nokia N900 that regressed a while
ago after the move to configuring them from DT. Some other OMAPs
now set the correct dma limits on the L3 bus, and a regression fix
addresses lost Ethernet on dm814x
- One incorrect setting in the newly added Raspberry Pi Zero W that
may cause issues with the SD card controller.
- A missing property on the bcm2835 firmware node caused incorrect
DMA settings.
- An old bug on the oxnas platform causing spurious interrupts is
finally addressed.
- A regression on the Exynos Midas board broke the OLED panel power
supply.
- The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
is now set to the values from the datasheet.
- Some 64-bit machines use a deprecated string to identify the PSCI
firmware.
There are also several small code fixes addressing mostly serious
issues:
- Fix the sunxi rsb bus access to no longer return incorrect data
when mixing 8 and 16 bit I/O.
- Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
quirk in the ti-sysc driver
- Fix a NULL pointer access from a race in the fsl dpio driver
- Fix a v5.5 regression in the exynos-chipid driver that caused an
invalid error code probing the device on non-exynos platforms
- Fix an out-of-bounds access in the AMD TEE driver"
* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: chipid: Fix return value on non-Exynos platforms
arm64: dts: Fix leftover entry-methods for PSCI
ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
ARM: dts: oxnas: Fix clear-mask property
ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
ARM: dts: omap5: Add bus_dma_limit for L3 bus
ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
ARM: dts: dra7: Add bus_dma_limit for L3 bus
ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
ARM: dts: sun8i: a33: add the new SS compatible
dt-bindings: crypto: add new compatible for A33 SS
ARM: dts: sun8i: r40: Move SPI device nodes based on address order
ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
ARM: dts: sun8i: r40: Move AHCI device node based on address order
ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
soc: fsl: dpio: register dpio irq handlers after dpio create
tee: amdtee: out of bounds read in find_session()
ARM: dts: N900: fix onenand timings
bus: ti-sysc: Fix quirk flags for lcdc on am335x
ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
...
The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW
NUSS Port 1 in rgmii-rxid mode.
Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU
Gigabit Ethernet two ports Switch subsystem (CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DT node for The TI J721E MCU SoC Gigabit Ethernet
subsystem (MCU CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS
Port 1 in rgmii-rxid mode.
Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit
Ethernet two ports Switch subsystem (CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DT node for the TI AM65x SoC Gigabit Ethernet two ports Switch
subsystem (CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This brings initial support for the SM8250 and IPQ6018 platforms.
SDM845 gets audio, PCIe and IP-accelerator support, and the interconnect
providers are refactored. The Lenovo Yoga C630 has audio enabled and the
DB845c has PCIe, analog audio and low-speed interfaces enabled. The
SDM845 MTP has its display enabled and firmware location updated to
match linux-firmware.
SC7180 gains CPU topology and power properties. Interconnect providers,
eMMC, SD-card, multimedia clocks, display, Bluetooth, Venus are added.
Critical trip points are added as well as various fixes.
For MSM8916 FastRPC support is added, ETM power management and reserved
memory for Samsung A2015 are corrected.
MSM8996 switches to generic QMP phy driver for its UFS support. MSM8998
temporarily disables part of Coresight to boot without
clk_ignore_unused. CEQ for eMMC on QCS404 is enabled.
Fixes throughout the platforms to fix binding compliance, correct
compatibles for SDHCI nodes and add gpio-ranges.
-----BEGIN PGP SIGNATURE-----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=vdPz
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/late
Qualcomm ARM64 DT updates for v5.7
This brings initial support for the SM8250 and IPQ6018 platforms.
SDM845 gets audio, PCIe and IP-accelerator support, and the interconnect
providers are refactored. The Lenovo Yoga C630 has audio enabled and the
DB845c has PCIe, analog audio and low-speed interfaces enabled. The
SDM845 MTP has its display enabled and firmware location updated to
match linux-firmware.
SC7180 gains CPU topology and power properties. Interconnect providers,
eMMC, SD-card, multimedia clocks, display, Bluetooth, Venus are added.
Critical trip points are added as well as various fixes.
For MSM8916 FastRPC support is added, ETM power management and reserved
memory for Samsung A2015 are corrected.
MSM8996 switches to generic QMP phy driver for its UFS support. MSM8998
temporarily disables part of Coresight to boot without
clk_ignore_unused. CEQ for eMMC on QCS404 is enabled.
Fixes throughout the platforms to fix binding compliance, correct
compatibles for SDHCI nodes and add gpio-ranges.
* tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (56 commits)
arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
arm64: dts: sdm845: add IPA information
arm64: dts: qcom: db845c: add analog audio support
arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
arm64: dts: qcom: c630: Enable audio support
arm64: dts: qcom: sdm845: add apr nodes
arm64: dts: qcom: sdm845: add slimbus nodes
arm64: dts: qcom: sc7180: Update reg names for SDHC
arm64: dts: qcom: qcs404: Enable CQE support for eMMC
arm64: dts: msm8916: Add fastrpc node
arm64: dts: qcom: sm8250: Add sm8250 dts file
arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5
arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes
arm64: dts: qcom: apq8016-sbc: Remove wrong regulator supply
arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node
arm64: dts: qcom: msm8998: Fix cpu compatible
arm64: dts: qcom: sc7180: Add OSM L3 interconnect provider
arm64: dts: qcom: sdm845: Add OSM L3 interconnect provider
arm64: dts: sc7180: Add interconnect provider DT nodes
arm64: dts: qcom: msm8996: Use generic QMP driver for UFS
...
Link: https://lore.kernel.org/r/20200318043823.GA470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I accidentally merged this after requesting a different solution,
reverting now.
Link: https://patchwork.kernel.org/patch/11431397/
Fixes: 2cedfe1247 ("arm64: dts: specify console via command line")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add real time clock node
mt8173:
- mark arch timer invalid in suspend
mt8183:
- add CPU idle states
- add watchdog node
- add dynamic power coefficient and cooling cells for all CPUs
mt8516:
- add basic support for the SoC
- add basic support for the pumpkin board
-----BEGIN PGP SIGNATURE-----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=8cRs
-----END PGP SIGNATURE-----
Merge tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt2712:
- add real time clock node
mt8173:
- mark arch timer invalid in suspend
mt8183:
- add CPU idle states
- add watchdog node
- add dynamic power coefficient and cooling cells for all CPUs
mt8516:
- add basic support for the SoC
- add basic support for the pumpkin board
* tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: add RTC nodes for MT2712
arm64: dts: mediatek: add pumpkin board dts
arm64: dts: mediatek: add dtsi for MT8516
arm64: dts: mt8183: Add #cooling-cells to CPU nodes
arm64: dts: mt8183: add/update dynamic power coefficients
arm64: dts: mediatek: rename scpsys nodes to power-controller
amr64: dts: mt8183: Add watchdog node
arm64: dts: mt8173: add arm,no-tick-in-suspend in timer
arm64: dts: mt8183: Enable CPU idle-states
Link: https://lore.kernel.org/r/c512b5cb-e639-1429-64db-9c1a53378c49@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add missing clocks to dwc3 nodes on am65x (fixes USB)
- Add DMA entries for main_spi0 on am65x
- Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet
support)
- Add DMA entries for ADC for both am65x and j721e
- Add MCU system control module on j721e (needed by phy-gmii-sel)
-----BEGIN PGP SIGNATURE-----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=XbCt
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt
Texas Instruments K3 SoC family changes for v5.7
- Add missing clocks to dwc3 nodes on am65x (fixes USB)
- Add DMA entries for main_spi0 on am65x
- Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet
support)
- Add DMA entries for ADC for both am65x and j721e
- Add MCU system control module on j721e (needed by phy-gmii-sel)
* tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
Link: https://lore.kernel.org/r/4b6b7804-4bcb-07ba-5e76-6a411e1f457f@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
- Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
- Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
- Add SNVS clock description to pwrkey device for i.MX8 SoCs.
- A number of updates on librem5-devkit board to add audio, proximity
sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
devices as well.
- A series of patches from Anson Huang to update i.MX8 EVK boards
for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
- Add PCIe device nodes for LX2160A and LS1028A SoC.
- Add FSPI deivce support for LX2160A evaluation boards.
- Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
- Other small and random updates on LS1028A and i.MX8 support.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xmGAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7hcggAituxUHoAgPgEmEp7h+7C0dAkD8tL
G21IEi1xL608qIeKgVsyhPqbIze84+CrxzWhhUDJD+EUoVYwc78mGwOebDPBT+bE
U/VP0GU3oaHUOe0zApSf+4uWWHxmx2tqBut6qwgKp9h/nmXQKZ39yivAifrQgyn5
jckrN+gtGoCWLPUVF4baqUBJ7383A2gCpGsdTodNg95e903PYRDFORoez/8q4Hdo
r86YbIZca+tQxDrG00tpKgb0n0iIFsR139YTQtSjUQhzw9nRUcF2AuxtYGYl96mo
ZTyW82fLf+t9Av416cHFi8EL9DKQxVV6stSL6OCrVosll9zWoN/dTuNiOw==
=nTfu
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 DTS update for 5.7:
- New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
- Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
- Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
- Add SNVS clock description to pwrkey device for i.MX8 SoCs.
- A number of updates on librem5-devkit board to add audio, proximity
sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
devices as well.
- A series of patches from Anson Huang to update i.MX8 EVK boards
for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
- Add PCIe device nodes for LX2160A and LS1028A SoC.
- Add FSPI deivce support for LX2160A evaluation boards.
- Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
- Other small and random updates on LS1028A and i.MX8 support.
* tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
arm64: dts: ls1028a: disable the felix switch by default
arm64: dts: imx8mp: Add snvs clock to powerkey
arm64: dts: imx8mn: Add snvs clock to powerkey
arm64: dts: ls1028a: Add PCIe controller DT nodes
arm64: dts: ls1028a: sl28: add support for variant 2
arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
arm64: dts: freescale: sl28: add SPI flash
arm64: dts: imx8m: fix aips dts node
arm64: dts: imx8mn: Add CPU thermal zone support
arm64: dts: imx8mm: Add thermal zone support
arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
arm64: dts: enable fspi in imx8mm dts
arm64: dts: imx8mn: align name for crypto child nodes
arm64: dts: lx2160aqds: Add FSPI node properties
arm64: dts: lx2160ardb: Update FSPI node properties
arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
arm64: dts: layerscape: add iommu-map property to pci nodes
arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
arm64: dts: imx8mp-evk: Add i2c3 support
...
Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the rk3399 evaluation board, a big number of fixes for issues found by
checking against the new yaml dt-bindings.
And on the smaller side, fixes for network transfers, the mute gpio
on rk3328 gets actually described and one lvds fix on the px30 and
the rk3399-hugsun board gets IR and power led.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl5wIB4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZedCACIYcPVbaJlAzl3wVTktvLN3uVa1g44PAFW
TDH0kD+fmng6HuEPq2oGjXZ9jifX25DaA96XloM0VE1y1dM1q+crwliGGLMlY6wg
BgraArFpt7k93N3e4I7VkgbEmdO5yASfwd/h5dY8UdCk6xLRZrFAiF6gqTGab5Ea
oSc7vf6cXDTHXsus23Tc6fIlh40YITlRNhX1gZX9Pg8X+Q2c3JXpLpB3f/lucnLA
Eyndv56vk8UARIlCAR5OjypU/za+eq0KwQuYlpwNu5YXn74vkh9TRhDZ4awaMyAd
fX7YLirMpgXQ3xjUn7oyDAA5ZaiIn7+UVRwfV+gH5ipyVP+cCMYj
=1r14
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Support for the rk3399-based Pinebook Pro, eDP support and power-tree for
the rk3399 evaluation board, a big number of fixes for issues found by
checking against the new yaml dt-bindings.
And on the smaller side, fixes for network transfers, the mute gpio
on rk3328 gets actually described and one lvds fix on the px30 and
the rk3399-hugsun board gets IR and power led.
* tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
arm64: dts: rockchip: Add Hugsun X99 power led
arm64: dts: rockchip: Add Hugsun X99 IR receiver
arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes
arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes
arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator
arm64: dts: add bus to rockchip amba nodenames
arm64: dts: rockchip: replace clock-freq-min-max by max-frequency
arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma
arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB
arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30
arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99
arm64: dts: rockchip: fix compatible property for rk3399-evb
arm64: dts: rockchip: Add initial support for Pinebook Pro
dt-bindings: Add doc for Pine64 Pinebook Pro
arm64: dts: rockchip: Enable eDP display on rk3399 evb
arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb
arm64: dts: rockchip: Add pmic dt tree for rk3399 evb
arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb
arm64: dts: rockchip: fix px30 lvds ports
arm64: dts: rockchip: Add txpbl node for RK3399/RK3328
...
Link: https://lore.kernel.org/r/27799037.pT45f1LVdF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Improve network support on two Armada 8040 based board:
Clearfog GT 8 and Macchiatobin.
Add ethernet alias on Espressobin for U-Boot support.
Fix various dt compilation issue or warning.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXm35YwAKCRALBhiOFHI7
1dBwAJ9RhpG2CZus/Z8MrRVRnmCJZOqGqgCdGtgvTqQzOMLqV0lldV7f2Kv1ou8=
=ON67
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.7 (part 1)
Improve network support on two Armada 8040 based board:
Clearfog GT 8 and Macchiatobin.
Add ethernet alias on Espressobin for U-Boot support.
Fix various dt compilation issue or warning.
* tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: Fix cpu compatible for AP807-quad
arm64: dts: marvell: fix non-existed cpu referrence in armada-ap806-dual.dtsi
arm64: dts: marvell: build ESPRESSObin variants
arm64: dts: marvell: espressobin: indicate dts version
arm64: dts: marvell: espressobin: add ethernet alias
arm64: dts: mcbin: support 2W SFP modules
arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay
Link: https://lore.kernel.org/r/87h7yqx7w2.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These changes add support for the XUSB pad controller, as well as the
XUSB controller on Tegra194. Furthermore, USB device mode is supported
across Tegra210 and Tegra186 boards. PCIe endpoint mode support is added
for the Jetson AGX Xavier platform.
Various minor fixes eliminate warnings on boot related to missing power
supplies for some devices.
-----BEGIN PGP SIGNATURE-----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=WzUt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.7-rc1
These changes add support for the XUSB pad controller, as well as the
XUSB controller on Tegra194. Furthermore, USB device mode is supported
across Tegra210 and Tegra186 boards. PCIe endpoint mode support is added
for the Jetson AGX Xavier platform.
Various minor fixes eliminate warnings on boot related to missing power
supplies for some devices.
* tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add support for PCIe endpoint mode in P2972-0000 platform
arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194
arm64: tegra: Add ethernet alias on Jetson TX1
arm64: tegra: Populate LP8557 backlight regulator
arm64: tegra: Fix Tegra186 SOR supply
arm64: tegra: Add EEPROM supplies
arm64: tegra: Enable I2C controller for EEPROM
arm64: tegra: smaug: Change clk_out_2 provider to PMC
arm64: tegra: Add clock-cells property to Tegra PMC node
arm64: tegra: Enable XUDC node on Jetson Nano
arm64: tegra: Update OTG port entries for Jetson Nano
arm64: tegra: Enable XUDC node on Jetson TX2
arm64: tegra: Add XUDC node for Tegra186
arm64: tegra: Enable XUDC on Jetson TX1
arm64: tegra: Add XUDC node for Tegra210
arm64: tegra: Update OTG port entries for Jetson TX2
arm64: tegra: Update OTG port entries for Jetson TX1
arm64: tegra: Enable XUSB host in P2972-0000 board
arm64: tegra: Add XUSB and pad controller on Tegra194
arm64: tegra: Fix Tegra194 PCIe compatible string
Link: https://lore.kernel.org/r/20200313165848.2915133-8-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Thermal support for R-Car M3-W+,
- Support for the M3ULCB board with R-Car M3-W+,
- CPUIdle support for R-Car M3-N and E3,
- Display support for the HiHope RZ/G2M board,
- A minor fix.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXmtWzAAKCRCKwlD9ZEnx
cGR9AP9dB6K8Utcu+oPDbAtPNhQt7OVdsdWP6tqQz19QyD2W4AD+JPXaDrFjLymA
a0VEhXst/5bSqVoi3GydrnEIEVZF+gc=
=oU8J
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM64 DT updates for v5.7 (take two)
- Thermal support for R-Car M3-W+,
- Support for the M3ULCB board with R-Car M3-W+,
- CPUIdle support for R-Car M3-N and E3,
- Display support for the HiHope RZ/G2M board,
- A minor fix.
* tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display
arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores
arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores
arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address
arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+
arm64: dts: renesas: r8a77961: Add thermal nodes
Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Schema validation for the top level of all ARM reference
designs: Integrator, Versatile, RealView, Juno.
- Clean up some node names in the trees so they pass
validation fine.
- Drop the old text bindings.
- A top level DMA ranges patch from Rob.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl5fvGIACgkQQRCzN7AZ
XXNf7xAAuf9DBhZ544JMn67I4reSltISWeng8TfPjT8ZB+3l8X+G6YEXoBdgd0dl
SYwtJyJ7wOQJk2jCy9L5lOnvF3frD8OIZw/UDAhHno/kn4yrR2/sHjhqSGEpspaL
wZ0LLRe6wnPNBQHgvGVa3T/Tr7nLbu5Gs/Z+LAb1C4V5atj386JLF9OxNcK5xUMx
+abJinQF1kI79N5HgLE+BZ5qNZG4COlcdHZz5im6sBPKF4UDyfHYqUY0FGUIhV4j
3biI1L5w0CWJ498eXOlQ5zMnuUyp17gEgd7MBOOe02LzJOfh6m2qHbOWIe8x22/i
sqs/Q5hwSeKzrKFzwQqgY/i9O/WeIvziMVUAb3FzcuTrXJGKHXpMXkSYhsAv+Yyv
gOkTmsUA4y9Q6LlhGCrZcpKzan7pM1rKtJMK+3yj/GvEookpzFj59LkWFHdsOIJZ
Gp34xT5hO8RKSrrNMX7b92svJtFdWciKWxVPlEK2pdfNam3+B0/nkv2QLDJ8e1t6
IslDcPDiJf7e0xEelG+tpkLpjls/1QSBA+kghZA5L0NL5mbnM9j4/NH7RMChfF/8
zu6VKuQdDNGjpEqocCDy0OlGjD0gNQcHHaCQepqMX6LaEnEoA3zQezjDDRpXg2l+
5ouUsPMtIWIG8lCxhI6XCFpWgmd05zOJRbbuKevoGwIchT1/bMA=
=0W6a
-----END PGP SIGNATURE-----
Merge tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt
Versatile DTS updates for the v5.7 series take one:
- Schema validation for the top level of all ARM reference
designs: Integrator, Versatile, RealView, Juno.
- Clean up some node names in the trees so they pass
validation fine.
- Drop the old text bindings.
- A top level DMA ranges patch from Rob.
* tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM/arm64: dts: Rename SMB bus to just bus
dt-bindings: arm: Drop the non-YAML bindings
dt-bindings: arm: Add Versatile Express and Juno YAML schema
dt-bindings: arm: Add RealView YAML schema
dt-bindings: arm: Add Versatile YAML schema
dt-bindings: arm: Add Integrator YAML schema
ARM: dts: RealView: Fix the name of the SoC node
ARM: dts: Versatile: Use syscon as node name for IB2
ARM: dts: integratorap: Remove top level dma-ranges
Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These two device trees were either missed or added after
the commit correcting the "entry-method" from
"arm,psci" to just "psci" as per the binding.
Link: https://lore.kernel.org/r/20200322115846.16265-1-linus.walleij@linaro.org
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add DT node for MCU System Control module DT node and DT node for the TI
J721E SoC phy-gmii-sel PHY required for Ethernet ports mode selection.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add DT node for the TI AM65x SoC phy-gmii-sel PHY required for Ethernet
ports mode selection.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add DMA entry for main_spi0, that has SPI flash connected, for better
throughput and reduced CPU load.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The TI sci-clk driver can scan the DT for all clocks provided by system
firmware and does this by checking the clocks property of all nodes, so
we must add this to the dwc3 nodes so USB clocks are available.
Without this USB does not work with latest system firmware i.e.
[ 1.714662] clk: couldn't get parent clock 0 for /interconnect@100000/dwc3@4020000
Fixes: cc54a99464 ("arm64: dts: ti: k3-am6: add USB suppor")
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Cc: stable@kernel.org
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add disabled SPIFC controller node with instruction on how to enable
it while lowering capabilities of the eMMC controller from 8bits bus
width to 4bits bus width, it's data pins 4 to 7 being shared with
the SPI NOR controller pins.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200313090713.15147-5-narmstrong@baylibre.com
Add disabled SPIFC controller node with instruction on how to enable
it while lowering capabilities of the eMMC controller from 8bits bus
width to 4bits bus width, it's data pins 4 to 7 being shared with
the SPI NOR controller pins.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200313090713.15147-4-narmstrong@baylibre.com
Add the controller and pinctrl nodes to enable the SPI Flash Controller
on the Amlogic G12A and compatible SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200313090713.15147-3-narmstrong@baylibre.com
The Khadas VIM3 shares the eMMC pins 4 to 7 with the SPI NOR, in order
to enable the eMMC and the SPI NOR interface, we need to omit the
4 last pins from the eMMC pinctrl.
As it was done for the Khadas VIM2, split the eMMC pinctrls in ctrl, data
and ds pins with either 4bits data or 8bits data, and update the current
board accordingly.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200313090713.15147-2-narmstrong@baylibre.com
Add IPA-related nodes and definitions to "sdm845.dtsi".
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200313115237.10491-2-elder@linaro.org
[bjorn: Moved modem-init to cheza.dtsi]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Remove pwm0 node as it interferes with power LED gpio.
Tested with LibreElec linux-next-20200305
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Link: https://lore.kernel.org/r/20200313230513.123049-1-npcomplete13@gmail.com
[split out led addition into separate patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5d0000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ohci', so remove them.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200312171441.21144-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5c0000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ehci', so remove them.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ehci.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200312171441.21144-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
An expermental test with the command below gives this error:
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml:
spdif@ff870000:
'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'
'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns'
are not valid properties for 'spdif' nodes, so remove them.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200312172240.21362-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The correct setting for the RGMII ports on LS1046ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit 1b3047b520 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii".
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes: 3fa395d2c4 ("arm64: dts: add LS1046A DPAA FMan nodes")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
