Use macros to describe gpios will make the dts easier to
read and write.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[converted interrupt-gpios and new rk3399-evb backlight]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
commit 1ade61c141 ("arm64: dts: rockchip: remove broken-cd
from emmc and sdio") was intended to remove the abuse of
broken-cd property from mmc. But somehow it forgot to remove
this property from sdio0 node. Let's remove it now.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Drop superfluous #address-cells and #size-cells.
Use KEY_POWER define for 116.
Rename sub-nodes to avoid new dtc warnings.
Reported-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Only one of "broken-cd" and "non-removable" should be supplied
according to Documentation/devicetree/bindings/mmc/mmc.txt.
Obviously emmc and sdio-wifi are non-removable devices, while
broken-cd is for removable device whose card detect pin is broken.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
"gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
source.
Few dts files assign value "1" to gpio-key,wakeup and in one instance a
value "0" is assigned probably assuming it won't be enabled as a wakeup
source. Since the presence of the boolean property indicates it is
enabled, value of "0" have no value.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property which inturn fixes the above mentioned issue.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enable the TS-ADC.
When a thermal temperature is invoked use the CRU to reset the chip
on R88 board. TSHUT is low active on this board.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In terms of peripherals the rk3368 is quite similar to the rk3288, which
makes it possible to have a lot basic components working in the first go.
More to follow once I tracked down all the tiny differences that still
exist in some parts.
With these dts files, the R88 board is able to boot from an attached
usb device and most likely from its emmc too, if the emmc uses a standard
partition table instead of Rockchip's own one - the emmc itself is
detected correctly.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
