Commit Graph

190 Commits

Author SHA1 Message Date
Wen Yang
32830a0534 ipmi: fix hung processes in __get_guid()
The wait_event() function is used to detect command completion.
When send_guid_cmd() returns an error, smi_send() has not been
called to send data. Therefore, wait_event() should not be used
on the error path, otherwise it will cause the following warning:

[ 1361.588808] systemd-udevd   D    0  1501   1436 0x00000004
[ 1361.588813]  ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40
[ 1361.677952]  ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010
[ 1361.767077]  00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000
[ 1361.856199] Call Trace:
[ 1361.885578]  [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780
[ 1361.951406]  [<ffffffff8173cfb6>] schedule+0x36/0x80
[ 1362.010979]  [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler]
[ 1362.091281]  [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100
[ 1362.168533]  [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler]
[ 1362.258337]  [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si]
[ 1362.334521]  [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si]
[ 1362.411701]  [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si]
[ 1362.487917]  [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si]
[ 1362.568219]  [<ffffffff810021a0>] do_one_initcall+0x50/0x180
[ 1362.636109]  [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190
[ 1362.714330]  [<ffffffff811b2ae1>] do_init_module+0x5f/0x200
[ 1362.781208]  [<ffffffff81123ca8>] load_module+0x1898/0x1de0
[ 1362.848069]  [<ffffffff811202e0>] ? __symbol_put+0x60/0x60
[ 1362.913886]  [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80
[ 1362.998514]  [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120
[ 1363.068463]  [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120
[ 1363.140513]  [<ffffffff811244be>] SyS_finit_module+0xe/0x10
[ 1363.207364]  [<ffffffff81003c04>] do_syscall_64+0x74/0x180

Fixes: 50c812b2b9 ("[PATCH] ipmi: add full sysfs support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.17-
Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-04-03 07:59:10 -05:00
Amol Grover
4f1885a7b3 drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists
intf->cmd_rcvrs is traversed with list_for_each_entry_rcu
outside an RCU read-side critical section but under the
protection of intf->cmd_rcvrs_mutex.

ipmi_interfaces is traversed using list_for_each_entry_rcu
outside an RCU read-side critical section but under the protection
of ipmi_interfaces_mutex.

Hence, add the corresponding lockdep expression to the list traversal
primitive to silence false-positive lockdep warnings, and
harden RCU lists.

Add macro for the corresponding lockdep expression to make the code
clean and concise.

Signed-off-by: Amol Grover <frextrite@gmail.com>
Message-Id: <20200117132521.31020-1-frextrite@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-03-12 14:56:00 -05:00
Navid Emamdoost
4aa7afb0ee ipmi: Fix memory leak in __ipmi_bmc_register
In the impelementation of __ipmi_bmc_register() the allocated memory for
bmc should be released in case ida_simple_get() fails.

Fixes: 68e7e50f19 ("ipmi: Don't use BMC product/dev ids in the BMC name")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Message-Id: <20191021200649.1511-1-navid.emamdoost@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-10-22 14:42:34 -05:00
Andy Shevchenko
8ee7b485bb ipmi: use %*ph to print small buffer
Use %*ph format to print small buffer as hex string.

The change is safe since the specifier can handle up to 64 bytes and taking
into account the buffer size of 100 bytes on stack the function has never been
used to dump more than 32 bytes. Note, this also avoids potential buffer
overflow if the length of the input buffer is bigger.

This completely eliminates ipmi_debug_msg() in favour of Dynamic Debug.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20191011155036.36748-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-10-22 14:42:34 -05:00
Corey Minyard
cbb79863fc ipmi: Don't allow device module unload when in use
If something has the IPMI driver open, don't allow the device
module to be unloaded.  Before it would unload and the user would
get errors on use.

This change is made on user request, and it makes it consistent
with the I2C driver, which has the same behavior.

It does change things a little bit with respect to kernel users.
If the ACPI or IPMI watchdog (or any other kernel user) has
created a user, then the device module cannot be unloaded.  Before
it could be unloaded,

This does not affect hot-plug.  If the device goes away (it's on
something removable that is removed or is hot-removed via sysfs)
then it still behaves as it did before.

Reported-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: tony camuso <tcamuso@redhat.com>
2019-10-22 14:42:34 -05:00
Tony Camuso
383035211c ipmi: move message error checking to avoid deadlock
V1->V2: in handle_one_rcv_msg, if data_size > 2, set requeue to zero and
        goto out instead of calling ipmi_free_msg.
        Kosuke Tatsukawa <tatsu@ab.jp.nec.com>

In the source stack trace below, function set_need_watch tries to
take out the same si_lock that was taken earlier by ipmi_thread.

ipmi_thread() [drivers/char/ipmi/ipmi_si_intf.c:995]
 smi_event_handler() [drivers/char/ipmi/ipmi_si_intf.c:765]
  handle_transaction_done() [drivers/char/ipmi/ipmi_si_intf.c:555]
   deliver_recv_msg() [drivers/char/ipmi/ipmi_si_intf.c:283]
    ipmi_smi_msg_received() [drivers/char/ipmi/ipmi_msghandler.c:4503]
     intf_err_seq() [drivers/char/ipmi/ipmi_msghandler.c:1149]
      smi_remove_watch() [drivers/char/ipmi/ipmi_msghandler.c:999]
       set_need_watch() [drivers/char/ipmi/ipmi_si_intf.c:1066]

Upstream commit e1891cffd4 adds code to
ipmi_smi_msg_received() to call smi_remove_watch() via intf_err_seq()
and this seems to be causing the deadlock.

commit e1891cffd4
Author: Corey Minyard <cminyard@mvista.com>
Date:   Wed Oct 24 15:17:04 2018 -0500
    ipmi: Make the smi watcher be disabled immediately when not needed

The fix is to put all messages in the queue and move the message
checking code out of ipmi_smi_msg_received and into handle_one_recv_msg,
which processes the message checking after ipmi_thread releases its
locks.

Additionally,Kosuke Tatsukawa <tatsu@ab.jp.nec.com> reported that
handle_new_recv_msgs calls ipmi_free_msg when handle_one_rcv_msg returns
zero, so that the call to ipmi_free_msg in handle_one_rcv_msg introduced
another panic when "ipmitool sensor list" was run in a loop. He
submitted this part of the patch.

+free_msg:
+               requeue = 0;
+               goto out;

Reported by: Osamu Samukawa <osa-samukawa@tg.jp.nec.com>
Characterized by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Fixes: e1891cffd4 ("ipmi: Make the smi watcher be disabled immediately when not needed")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-22 11:08:13 -05:00
Corey Minyard
2033f68589 ipmi: Free receive messages when in an oops
If the driver handles a response in an oops, it was just ignoring
the message.  However, the IPMI watchdog timer was counting on the
free happening to know when panic-time messages were complete.  So
free it in all cases.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-16 16:18:18 -05:00
Suzuki K Poulose
92ce7e83b4 driver_find_device: Unify the match function with class_find_device()
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().

For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.

Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24 05:22:31 +02:00
Arnd Bergmann
9a75bd18a8 ipmi: avoid atomic_inc in exit function
This causes a link failure on ARM in certain configurations,
when we reference each atomic operation from .alt.smp.init in
order to patch out atomics on non-SMP systems:

`.exit.text' referenced in section `.alt.smp.init' of drivers/char/ipmi/ipmi_msghandler.o: defined in discarded section `.exit.text' of drivers/char/ipmi/ipmi_msghandler.o

In this case, we can trivially replace the atomic_inc() with
an atomic_set() that has the same effect and does not require
a fixup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20190415155509.3565087-1-arnd@arndb.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-04-17 13:14:25 -05:00
YueHaibing
794a3b6b9f ipmi: Make ipmi_interfaces_srcu variable static
Fix sparse warning:

drivers/char/ipmi/ipmi_msghandler.c:635:20: warning:
 symbol 'ipmi_interfaces_srcu' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Message-Id: <20190320133505.21984-1-yuehaibing@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-04-17 13:14:25 -05:00
Corey Minyard
3b9a907223 ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier
free_user() could be called in atomic context.

This patch pushed the free operation off into a workqueue.

Example:

 BUG: sleeping function called from invalid context at kernel/workqueue.c:2856
 in_atomic(): 1, irqs_disabled(): 0, pid: 177, name: ksoftirqd/27
 CPU: 27 PID: 177 Comm: ksoftirqd/27 Not tainted 4.19.25-3 #1
 Hardware name: AIC 1S-HV26-08/MB-DPSB04-06, BIOS IVYBV060 10/21/2015
 Call Trace:
  dump_stack+0x5c/0x7b
  ___might_sleep+0xec/0x110
  __flush_work+0x48/0x1f0
  ? try_to_del_timer_sync+0x4d/0x80
  _cleanup_srcu_struct+0x104/0x140
  free_user+0x18/0x30 [ipmi_msghandler]
  ipmi_free_recv_msg+0x3a/0x50 [ipmi_msghandler]
  deliver_response+0xbd/0xd0 [ipmi_msghandler]
  deliver_local_response+0xe/0x30 [ipmi_msghandler]
  handle_one_recv_msg+0x163/0xc80 [ipmi_msghandler]
  ? dequeue_entity+0xa0/0x960
  handle_new_recv_msgs+0x15c/0x1f0 [ipmi_msghandler]
  tasklet_action_common.isra.22+0x103/0x120
  __do_softirq+0xf8/0x2d7
  run_ksoftirqd+0x26/0x50
  smpboot_thread_fn+0x11d/0x1e0
  kthread+0x103/0x140
  ? sort_range+0x20/0x20
  ? kthread_destroy_worker+0x40/0x40
  ret_from_fork+0x1f/0x40

Fixes: 77f8269606 ("ipmi: fix use-after-free of user->release_barrier.rda")

Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 5.0
Cc: Yang Yingliang <yangyingliang@huawei.com>
2019-04-17 10:29:27 -05:00
Andy Shevchenko
f32043901a ipmi: Use dedicated API for copying a UUID
Use guid_copy() instead of memcpy() to hide guid_t implementation details and
to show we expect guid_t in a raw buffer.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-09 19:48:43 -06:00
Andy Shevchenko
16ccdb552e ipmi: Use defined constant for UUID representation
Instead of magic number use pre-defined constant for UUID binary and
string representations.

While here, drop the implementation details of guid_t type.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Also converted a "17" in the error string to UUID_SIZE + 1]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-09 19:48:43 -06:00
Corey Minyard
e1891cffd4 ipmi: Make the smi watcher be disabled immediately when not needed
The code to tell the lower layer to enable or disable watching for
certain things was lazy in disabling, it waited until a timer tick
to see if a disable was necessary.  Not a really big deal, but it
could be improved.

Modify the code to enable and disable watching immediately and don't
do it from the background timer any more.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
2019-02-09 19:48:42 -06:00
Corey Minyard
c65ea99659 ipmi: Fix how the lower layers are told to watch for messages
The IPMI driver has a mechanism to tell the lower layers it needs
to watch for messages, commands, and watchdogs (so it doesn't
needlessly poll).  However, it needed some extensions, it needed
a way to tell what is being waited for so it could set the timeout
appropriately.

The update to the lower layer was also being done once a second
at best because it was done in the main timeout handler.  However,
if a command is sent and a response message is coming back,
it needed to be started immediately.  So modify the code to
update immediately if it needs to be enabled.  Disable is still
lazy.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
2019-02-09 19:48:42 -06:00
Corey Minyard
913a89f009 ipmi: Don't initialize anything in the core until something uses it
The IPMI driver was recently modified to use SRCU, but it turns out
this uses a chunk of percpu memory, even if IPMI is never used.

So modify thing to on initialize on the first use.  There was already
code to sort of handle this for handling init races, so piggy back
on top of that, and simplify it in the process.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Tejun Heo <tj@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 4.18
2019-01-23 11:09:32 -06:00
Yang Yingliang
77f8269606 ipmi: fix use-after-free of user->release_barrier.rda
When we do the following test, we got oops in ipmi_msghandler driver
while((1))
do
	service ipmievd restart & service ipmievd restart
done

---------------------------------------------------------------
[  294.230186] Unable to handle kernel paging request at virtual address 0000803fea6ea008
[  294.230188] Mem abort info:
[  294.230190]   ESR = 0x96000004
[  294.230191]   Exception class = DABT (current EL), IL = 32 bits
[  294.230193]   SET = 0, FnV = 0
[  294.230194]   EA = 0, S1PTW = 0
[  294.230195] Data abort info:
[  294.230196]   ISV = 0, ISS = 0x00000004
[  294.230197]   CM = 0, WnR = 0
[  294.230199] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000a1c1b75a
[  294.230201] [0000803fea6ea008] pgd=0000000000000000
[  294.230204] Internal error: Oops: 96000004 [#1] SMP
[  294.235211] Modules linked in: nls_utf8 isofs rpcrdma ib_iser ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce sha2_ce ses sha256_arm64 sha1_ce hibmc_drm hisi_sas_v2_hw enclosure sg hisi_sas_main sbsa_gwdt ip_tables mlx5_ib ib_uverbs marvell ib_core mlx5_core ixgbe ipmi_si mdio hns_dsaf ipmi_devintf ipmi_msghandler hns_enet_drv hns_mdio
[  294.277745] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.0.0-rc2+ #113
[  294.285511] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.37 11/21/2017
[  294.292835] pstate: 80000005 (Nzcv daif -PAN -UAO)
[  294.297695] pc : __srcu_read_lock+0x38/0x58
[  294.301940] lr : acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler]
[  294.307853] sp : ffff00001001bc80
[  294.311208] x29: ffff00001001bc80 x28: ffff0000117e5000
[  294.316594] x27: 0000000000000000 x26: dead000000000100
[  294.321980] x25: dead000000000200 x24: ffff803f6bd06800
[  294.327366] x23: 0000000000000000 x22: 0000000000000000
[  294.332752] x21: ffff00001001bd04 x20: ffff80df33d19018
[  294.338137] x19: ffff80df33d19018 x18: 0000000000000000
[  294.343523] x17: 0000000000000000 x16: 0000000000000000
[  294.348908] x15: 0000000000000000 x14: 0000000000000002
[  294.354293] x13: 0000000000000000 x12: 0000000000000000
[  294.359679] x11: 0000000000000000 x10: 0000000000100000
[  294.365065] x9 : 0000000000000000 x8 : 0000000000000004
[  294.370451] x7 : 0000000000000000 x6 : ffff80df34558678
[  294.375836] x5 : 000000000000000c x4 : 0000000000000000
[  294.381221] x3 : 0000000000000001 x2 : 0000803fea6ea000
[  294.386607] x1 : 0000803fea6ea008 x0 : 0000000000000001
[  294.391994] Process swapper/3 (pid: 0, stack limit = 0x0000000083087293)
[  294.398791] Call trace:
[  294.401266]  __srcu_read_lock+0x38/0x58
[  294.405154]  acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler]
[  294.410716]  deliver_response+0x80/0xf8 [ipmi_msghandler]
[  294.416189]  deliver_local_response+0x28/0x68 [ipmi_msghandler]
[  294.422193]  handle_one_recv_msg+0x158/0xcf8 [ipmi_msghandler]
[  294.432050]  handle_new_recv_msgs+0xc0/0x210 [ipmi_msghandler]
[  294.441984]  smi_recv_tasklet+0x8c/0x158 [ipmi_msghandler]
[  294.451618]  tasklet_action_common.isra.5+0x88/0x138
[  294.460661]  tasklet_action+0x2c/0x38
[  294.468191]  __do_softirq+0x120/0x2f8
[  294.475561]  irq_exit+0x134/0x140
[  294.482445]  __handle_domain_irq+0x6c/0xc0
[  294.489954]  gic_handle_irq+0xb8/0x178
[  294.497037]  el1_irq+0xb0/0x140
[  294.503381]  arch_cpu_idle+0x34/0x1a8
[  294.510096]  do_idle+0x1d4/0x290
[  294.516322]  cpu_startup_entry+0x28/0x30
[  294.523230]  secondary_start_kernel+0x184/0x1d0
[  294.530657] Code: d538d082 d2800023 8b010c81 8b020021 (c85f7c25)
[  294.539746] ---[ end trace 8a7a880dee570b29 ]---
[  294.547341] Kernel panic - not syncing: Fatal exception in interrupt
[  294.556837] SMP: stopping secondary CPUs
[  294.563996] Kernel Offset: disabled
[  294.570515] CPU features: 0x002,21006008
[  294.577638] Memory Limit: none
[  294.587178] Starting crashdump kernel...
[  294.594314] Bye!

Because the user->release_barrier.rda is freed in ipmi_destroy_user(), but
the refcount is not zero, when acquire_ipmi_user() uses user->release_barrier.rda
in __srcu_read_lock(), it causes oops.
Fix this by calling cleanup_srcu_struct() when the refcount is zero.

Fixes: e86ee2d44b ("ipmi: Rework locking and shutdown for hot remove")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-01-23 10:44:23 -06:00
Fred Klassen
479d6b39b9 ipmi: Prevent use-after-free in deliver_response
Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr
handlers that call ipmi_free_recv_msg() directly. This will essentially
kfree(msg), leading to use-after-free.

This does not happen in the ipmi_devintf module, which will queue the
message and run ipmi_free_recv_msg() later.

BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0
Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27
CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G           O      4.19.11-amd64-ani99-debug #12.0.1.601133+pv
Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018
Call Trace:
dump_stack+0x92/0xeb
print_address_description+0x73/0x290
kasan_report+0x258/0x380
deliver_response+0x12f/0x1b0
? ipmi_free_recv_msg+0x50/0x50
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
...

Allocated by task 9885:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x116/0x290
ipmi_alloc_recv_msg+0x28/0x70
i_ipmi_request+0xb4a/0x1640
ipmi_request_settime+0x1b8/0x1e0
...

Freed by task 27:
__kasan_slab_free+0x12e/0x180
kfree+0xe9/0x280
deliver_response+0x122/0x1b0
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
tasklet_action_common.isra.19+0xc4/0x250
__do_softirq+0x11f/0x51f

Fixes: e86ee2d44b ("ipmi: Rework locking and shutdown for hot remove")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-01-23 10:44:45 -06:00
Gustavo A. R. Silva
a7102c7461 ipmi: msghandler: Fix potential Spectre v1 vulnerabilities
channel and addr->channel are indirectly controlled by user-space,
hence leading to a potential exploitation of the Spectre variant 1
vulnerability.

These issues were detected with the help of Smatch:

drivers/char/ipmi/ipmi_msghandler.c:1381 ipmi_set_my_address() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1401 ipmi_get_my_address() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1421 ipmi_set_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1441 ipmi_get_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:2260 check_addr() warn: potential spectre issue 'intf->addrinfo' [r] (local cap)

Fix this by sanitizing channel and addr->channel before using them to
index user->intf->addrinfo and intf->addrinfo, correspondingly.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-01-23 10:44:23 -06:00
YueHaibing
060e8fb53f ipmi: fix return value of ipmi_set_my_LUN
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/char/ipmi/ipmi_msghandler.c: In function 'ipmi_set_my_LUN':
drivers/char/ipmi/ipmi_msghandler.c:1335:13: warning:
 variable 'rv' set but not used [-Wunused-but-set-variable]
  int index, rv = 0;

'rv' should be the correct return value.

Fixes: 048f7c3e35 ("ipmi: Properly release srcu locks on error conditions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18 16:15:33 -05:00
Joe Perches
445e2cbda9 ipmi: msghandler: Add and use pr_fmt and dev_fmt, remove PFX
Standardize the prefixing of output messages using the pr_fmt and dev_fmt
mechanisms instead of a separate #define PFX

Miscellanea:

o Because this message prefix is very long, use a non-standard define
  of #define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
  which removes ~170 bytes of object code in an x86-64 defconfig with ipmi
  (with even more object code reduction on 32 bit compilations)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18 16:15:33 -05:00
Corey Minyard
2512e40e48 ipmi: Rework SMI registration failure
There were certain situations where ipmi_register_smi() would
return a failure, but the interface would still be registered
and would need to be unregistered.  This is obviously a bad
design and resulted in an oops in certain failure cases.

If the interface is started up in ipmi_register_smi(), then
an error occurs, shut down the interface there so the
cleanup can be done properly.

Fix the various smi users, too.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Justin Ernst <justin.ernst@hpe.com>
Tested-by: Justin Ernst <justin.ernst@hpe.com>
Cc: Andrew Banman <abanman@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: <stable@vger.kernel.org> # 4.18.x
2018-08-31 08:42:29 -05:00
Corey Minyard
048f7c3e35 ipmi: Properly release srcu locks on error conditions
When SRCU was added for handling hotplug, some error conditions
were not handled properly.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-24 15:08:30 -05:00
Corey Minyard
163475ebf9 ipmi: Remove the proc interface
It has been deprecated long enough, get rid of it.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-09 12:21:46 -05:00
Corey Minyard
6a0d23ed33 ipmi: ipmi_unregister_smi() cannot fail, have it return void
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:05 -05:00
Corey Minyard
8d17929ad5 ipmi: Remove condition on interface shutdown
Now that the interfaces have shutdown handlers, this no longer
needs to be conditional.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:01 -05:00
Corey Minyard
e86ee2d44b ipmi: Rework locking and shutdown for hot remove
To handle hot remove of interfaces, a lot of rework had to be
done to the locking.  Several things were switched over to srcu
and shutdown for users and interfaces was added for cleaner
shutdown.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:58 -05:00
Corey Minyard
ac93bd0c9e ipmi: Fix some counter issues
Counters would not be pegged properly on some errors.  Have
deliver_response() return an error so the counters can be
incremented properly.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:57 -05:00
Corey Minyard
a567b62300 ipmi: Change ipmi_smi_t to struct ipmi_smi *
Get rid of this coding style violation in the user files.  Include
files will come later.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:56 -05:00
Corey Minyard
2911c9886c ipmi: Rename ipmi_user_t to struct ipmi_user *
Get rid of that non-compliance in the user files.  Include files
will come later.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:55 -05:00
Corey Minyard
aa7a8f9e1b ipmi: Clean up some style issues in the message handler
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:52 -05:00
Corey Minyard
42c2dc7e66 ipmi: Break up i_ipmi_request
It was huge, and easily broken into pieces.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:51 -05:00
Corey Minyard
f41382ae57 ipmi: Clean up some debug code
Replace ifdefs in the code with a simple function.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:48 -05:00
Corey Minyard
91e2dd0a47 ipmi: Add a panic handler for IPMI users
Users of the IPMI code had their own panic handlers, but the
order was not necessarily right, the base IPMI code would
need to handle the panic first, and the user had no way to
know if the IPMI interface could run at panic time.

Add a panic handler to the user interface, it is called if
non-NULL and the interface the user is on is capable of panic
handling.  It also cleans up the panic log handling a bit to
reuse the existing interface loop in the main panic handler.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:47 -05:00
Corey Minyard
252e30c1e7 ipmi: Add a maintenance mode for IPMB messages
If you send a command to another BMC that might take some extra
time, increase the timeouts temporarily.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:43 -05:00
Corey Minyard
ce7fa1c38d ipmi: Add a way to tune some timeouts
By default the retry timeout is 1 second.  Allow that to be modified,
primarily for slow operations, like firmware writes.

Also, the timeout was driven by a 1 second timer, so 1 second really
meant between 0 and 1 second.  Set the default to 2 seconds so it
means between 1 and 2 seconds.

Also allow the time the interface automatically stays in mainenance
mode to be modified from it's default 30 seconds.

Also consolidate some of the timeout and retry setup.

Signed-off-by: Corey Minyard <cminyard@mvista.com>

more
2018-04-18 10:22:42 -05:00
Corey Minyard
243ac21035 ipmi: Add or fix SPDX-License-Identifier in all files
And get rid of the license text that is no longer necessary.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Rocky Craig <rocky.craig@hp.com>
2018-02-27 07:42:51 -06:00
Linus Torvalds
47fcc0360c Driver Core updates for 4.16-rc1
Here is the set of "big" driver core patches for 4.16-rc1.
 
 The majority of the work here is in the firmware subsystem, with reworks
 to try to attempt to make the code easier to handle in the long run, but
 no functional change.  There's also some tree-wide sysfs attribute
 fixups with lots of acks from the various subsystem maintainers, as well
 as a handful of other normal fixes and changes.
 
 And finally, some license cleanups for the driver core and sysfs code.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
 s6ygQPQhZIjKk2Lxa2hC
 =Zihy
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of "big" driver core patches for 4.16-rc1.

  The majority of the work here is in the firmware subsystem, with
  reworks to try to attempt to make the code easier to handle in the
  long run, but no functional change. There's also some tree-wide sysfs
  attribute fixups with lots of acks from the various subsystem
  maintainers, as well as a handful of other normal fixes and changes.

  And finally, some license cleanups for the driver core and sysfs code.

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
  device property: Define type of PROPERTY_ENRTY_*() macros
  device property: Reuse property_entry_free_data()
  device property: Move property_entry_free_data() upper
  firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
  firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
  USB: serial: keyspan: Drop firmware Kconfig options
  sysfs: remove DEBUG defines
  sysfs: use SPDX identifiers
  drivers: base: add coredump driver ops
  sysfs: add attribute specification for /sysfs/devices/.../coredump
  test_firmware: fix missing unlock on error in config_num_requests_store()
  test_firmware: make local symbol test_fw_config static
  sysfs: turn WARN() into pr_warn()
  firmware: Fix a typo in fallback-mechanisms.rst
  treewide: Use DEVICE_ATTR_WO
  treewide: Use DEVICE_ATTR_RO
  treewide: Use DEVICE_ATTR_RW
  sysfs.h: Use octal permissions
  component: add debugfs support
  bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
  ...
2018-02-01 10:00:28 -08:00
Joe Perches
c828a89203 treewide: Use DEVICE_ATTR_RO
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible.

Done with perl script:

$ git grep -w --name-only DEVICE_ATTR | \
  xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}'

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09 16:34:34 +01:00
Xiongfeng Wang
1b4254cee0 ipmi: use correct string length
gcc-8 reports

drivers/char/ipmi/ipmi_msghandler.c: In function
'panic_op_write_handler':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]

drivers/char/ipmi/ipmi_watchdog.c: In function 'set_param_str':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]

We need one less byte or call strlcpy() to make it a nul-terminated
string.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-08 20:02:47 -06:00
Kees Cook
e99e88a9d2 treewide: setup_timer() -> timer_setup()
This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
	... when != _origarg
	_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+	_handletype *_origarg = from_timer(_origarg, t, _timer);
+
	... when != _origarg
-	(_handletype *)_origarg
+	_origarg
	... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
	    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
	    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+	_handletype *_handle = from_timer(_handle, t, _timer);
	...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
	    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
-	_handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
	    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
	... when != _origarg
 }

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:07 -08:00
Colin Ian King
b79bba15b3 ipmi: remove redundant initialization of bmc
The pointer bmc is being initialized and this initialized value is
never being read, so this is assignment redundant and can be removed.
Cleans up clang warning:

warning: Value stored to 'bmc' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:29:44 -05:00
Corey Minyard
106a846102 ipmi: Clean up some print operations
Get rid of all printfs, using dev_xxx() if a device is available,
pr_xxx() otherwise, and format long strings properly.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:26:04 -05:00
Corey Minyard
95e300c052 ipmi: Make the DMI probe into a generic platform probe
Rework the DMI probe function to be a generic platform probe, and
then rework the DMI code (and a few other things) to use the more
generic information.  This is so other things can declare platform
IPMI devices.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:26:03 -05:00
Corey Minyard
55f91cb6f1 ipmi: Make the IPMI proc interface configurable
So we can remove it later.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:26:03 -05:00
Corey Minyard
3fd32f9ec8 ipmi: Convert IPMI GUID over to Linux guid_t
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard
31b0b0730a ipmi: Rescan channel list on BMC changes
If the BMC changes versions or a change is otherwise detected,
rescan the channels on the BMC.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard
5fdb1fb2ab ipmi: Move lun and address out of channel struct
Put it in it's own struct, getting ready for channel information
being dynamically changed.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard
c0734bd594 ipmi: Retry BMC registration on a failure
If the BMC fails to register, just set up to retry periodically.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard
b2cfd8ab4a ipmi: Rework device id and guid handling to catch changing BMCs
A BMC's guid or device id info may change dynamically, this could
result in a different configuration that needs to be done.  Adjust
the BMCs dynamically.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00