clang warns:
drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:601:33: warning:
suggest braces around initialization of subobject [-Wmissing-braces]
static SmuMetrics_t metrics = {0};
^
{}
drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:905:26: warning:
suggest braces around initialization of subobject [-Wmissing-braces]
SmuMetrics_t metrics = {0};
^
{}
2 warnings generated.
One way to fix these warnings is to add additional braces like clang
suggests; however, there has been a bit of push back from some
maintainers[1][2], who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version[3], and properly initializes all
subobjects. Do that here so there are no more warnings.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
[3]: https://lore.kernel.org/lkml/20181116150432.2408a075@redhat.com/
Fixes: 98e1a543c7 ("drm/amd/powerplay: add function get current clock freq interface for navi10")
Fixes: ab43c4bf1c ("drm/amd/powerplay: fix fan speed show error (for hwmon pwm)")
Link: https://github.com/ClangBuiltLinux/linux/issues/583
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the hwmon interface need temperature sensor type support.
1. SENSOR_HOTSPOT_TEMP
2. SENSOR_EDGE_TEMP(SENSOR_GPU_TEMP)
3. SENSOR_MEM_TEMP
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add baco reset support for smu11.
it can help gpu do asic reset when gpu recovery.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We observed some SMU commands take more time for execution,
so increase waiting time for response.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This driver currently contains a repeated 500ms blocking delay call
which causes frequent major buffer underruns in PulseAudio. This patch
fixes this issue by replacing the blocking delay with a non-blocking
sleep call.
Signed-off-by: Yrjan Skrimstad <yrjan@skrimstad.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, you may get divided-by-zero error or corrput the SMU fan
control feature.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Slava Abramov <slava.abramov@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I'm not entirely sure why this is, but for some reason:
921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the
pre-production laptops I have. The issue manifests as the following
messages in dmesg:
[drm] UVD and UVD ENC initialized successfully.
amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110).
And happens after about 6-10 runtime PM suspend/resume cycles (sometimes
sooner, if you're lucky!). Unfortunately I can't seem to pin down
precisely which part in psm_adjust_power_state_dynamic that is causing
the issue, but not skipping the display setting setup seems to fix it.
Hopefully if there is a better fix for this, this patch will spark
discussion around it.
Fixes: 921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the smu11_driver_if_navi10.h since navi10 smu fw
update to 42.28
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This seems a merge error.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement Navi10 backend for runtime ppfeatures status retrieving
and setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN DPM is a necessary prerequisite for VCN power gating.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The athub pg features enabling should be indicated by pg_flags.
Reported-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mmhub pg features enabling should be indicated by pg_flags.
Reported-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if not check dpm feature is enabled, it will cause show smc send message
failed log in dmesg log.
eg:
echo "auto" > power_dpm_force_performance_level
v2: whitespace fix (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support gfxclk dpm disablement.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
only printf smu version when if version not matched.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the navi asic can't get current rpm by MSG_GetCurrentRpm,
it will cause show fan rpm error, use Metrics_t to replace it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mutex for procting SMU during hw_init was removed as system
will be deadlock when smu_populate_umd_state_clk try get SMU mutex.
Therefore need remove the residual mutex from failed path.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ULL is needed for 32 bit arches.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For uvd_4/5/6, amdgpu driver will only power on them when
there are jobs assigned to decode/enc rings.uvd_4/5/6 dpm was broken
since amdgpu_dpm_set_powergating_by_smu only covers gfx block.
The change would add more IP block support in amdgpu_dpm_set_powergating_by_smu
For GFX/UVD/VCN/VCE, if the new SMU driver is supported, invoke new
power gate helper function smu_dpm_set_power_gate, otherwise, fallback to
legacy powerplay helper function pp_set_powergating_by_smu. For other IP blocks
always invoke legacy powerplay helper function.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc needs get uclk dpm table for bandwidth calculation
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when dc update clocks via smu, smu needs to know how many
displays active. this interface is for dc notify number
of active displays to smu.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when dc set mode or color format in frame buffer
change, it may request clock changes, like dispclk,
dcfclk, uclk. after smu get clock requests, smu
will make decision.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the PPSMC_MSG_SetFanTemperatureTarget is not support on navi10
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It would hit SMU fw bug without BACO enablement when audio
driver put audio device to D3 state. Before the bug in SMU fw
get fixed, enable BACO feature as WAR.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the uclk dpm feature is not work well on all navi10 asic,
use pp feature mask module parameter to control it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU FW has bug that it would cause hung when both fw dstate and
gfxoff are enabled at the same time.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the smu11_driver_if_navi10.h since navi10 smu fw
update to 42.23
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the od_settings is asic related data, so move it to asic file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the set default od_setting is asic related function,
so move thic code to vega20_ppt file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
these callback functions is only used for vega20 asic, to be compatible
other asics,need to move this code to vega20_ppt file
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use sw-smu clk type name to replace legacy clk type name
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the smu->mutex is internal lock resource in sw-smu, some functions will use
it at the same time, so it maybe will cause deadlock issue.
this patch fix this issue in smu_force_performance_level function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc needs get uclk dpm table for bandwidth calculation
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is hw workaround to wake up azalia from d3. display asic
and azalia are two different pci devices. while display asic
wake from d3, current hw does not send signal to azalia.
workaround: display driver ask smu send message to azalia device
to let azalia wake up.
Defintion of SMU message, like PPSMC_MSG_BacroAudioD3PME, is per
asic. It is shared by different OS.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when dc update clocks via smu, smu needs to know how many
displays active. this interface is for dc notify number
of active displays to smu.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when dc set mode or color format in frame buffer
change, it may request clock changes, like dispclk,
dcfclk, uclk. after smu get clock requests, smu
will make decision.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove smu callback: get_mclk, get_sclk.
because the function smu_get_dpm_freq_range has the same function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the smu mutex lock is unnecessary in smu hw init.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add sw-CTF support for navi10
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The thermal policy could be ASIC specific ones and depends on structures
in pptable. As a result, get_thermal_temperature_range should be implemented
as ppt funcs instead of smu funcs
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the fcuntion thermal_get_temperature will be access SmuMetrics_t data,
the data structure is asic related, so move vega20_ppt to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the SmuMetrics_t table is asic related data structure.
so move vega20_ppt file to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
because this callback is not asic related function, so move it to top
code level to support more asic (eg: navi10)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
