Enable SPI driver and SPI NOR flash support as modules.
Tested with SPI NOR flash on DA850-EVM. Basic boot test only to confirm
NOR flash device detection.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
CONFIG_FHANDLE is required by systemd[1], which is the
default init system in more and more distributions.
So lets enable it for DaVinci platforms as well.
While at it, remove stale entry CONFIG_INOTIFY=y
[1] https://github.com/systemd/systemd/blob/master/README#L37
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.
Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
The change enables build of ARM PrimeCell PL17x driver for LPC32xx
platform, the memory controller is commonly used to interface NOR
flash drives.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The change is a result of "make lpc32xx_defconfig; make savedefconfig"
run, a number of config options are removed:
CONFIG_BINFMT_AOUT=y -- not needed, legacy
CONFIG_FPE_NWFPE=y -- not needed, AEABI build
CONFIG_IPV6_PRIVACY=y -- removed build option
CONFIG_IPV6=y -- selected by default
CONFIG_MII=y -- not needed, board phys don't select library
CONFIG_MTD_CHAR=y -- removed build option
CONFIG_MTD_M25P80=y -- not needed, AT25 EEPROM driver is in use
CONFIG_USB_PHY=y -- selected by default
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This enables the new driver for Marvell CESA crypto engines on all mvebu v5.
The old driver is no longer used, but it is still in the tree for fallback.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This enables the new driver for Marvell CESA crypto engines on all ARMv7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This enables the new driver for Marvell CESA crypto engines on all mvebu v7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-----------
- Enable ST's HW Random number generator in multi_v7 defconfig
- Enable PWM regulator support in multi_v7 defconfig
- Enable ST's Power and Reset driver in multi_v7 defconfig
- Enable ST's PWM in multi_v7 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OJtH
-----END PGP SIGNATURE-----
Merge tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/defconfig
Highlights:
-----------
- Enable ST's HW Random number generator in multi_v7 defconfig
- Enable PWM regulator support in multi_v7 defconfig
- Enable ST's Power and Reset driver in multi_v7 defconfig
- Enable ST's PWM in multi_v7 defconfig
* tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
ARM: multi_v7_defconfig: Enable ST's HW Random Number Generator
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's Power Reset driver
ARM: multi_v7_defconfig: Enable ST's PWM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Three types of display controller-drivers where added recently. The
Analogix Displayport variant and Designware MIPI DSI used for example
on the rk3288 as well as the Innosilicon HDMI controller used on the
rk3036.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
The displayport phy controls the output of the Analogix displayport
controller on Rockchip SoCs and is therefore one component to enable
veyron devices to use their internal display.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
MDIO Bus/PHY emulation with fixed speed/link PHYs will be used in
Baltos iR5221 devices to connect to ICPlus IP175D switch IC.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable DP83867 Ethernet phy for supporting networking on DRA72-EVM rev C
(SR2.0).
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the TI TPIC2810 8-Bit LED Driver with I2C Interface. This is used
in AM335x ICEv2 Boards.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the config options needed to get CPU hotplug functional.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by
systemd (which also matches the multi_v7 defconfig). Also enable IPV6,
which defaults to 'y' by now.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently only the ondemand and performance CPUFreq policy governors are
enabled in multi_v7 defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.
The options are enabled as module to keep the kernel image size minimal.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Currently only the ondemand and performance CPUFreq policy governors are
enabled in the Exynos defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.
The options are enabled as module to keep the kernel image size minimal.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis
Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen
and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to
get some testing coverage and use its features.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Although the SoC support was already enabled, the drivers and machines
were missing.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Those two touch controllers are used by Boundary Devices platforms.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is also present in multi_v7_defconfig, and means that I can test
the pi1 with the 2835 defconfig in my normal environment.
Signed-off-by: Eric Anholt <eric@anholt.net>
Combined with the queued DT changes, we now get HDMI and 3D support.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
The power domain driver we've enabled doesn't actually do anything
without it, and we need it to do its job for VC4 to initialize
successfully.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
This approximately triples write performance for the SD card. My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
performance appears to be unaffected.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
This allows the Raspberry Pi 2 to be network booted from the
defconfig.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
This approximately triples write performance for the SD card. My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
performance appears to be unaffected.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
The WDT is required for reboot and I2S is used for audio devices on
the P5 header (or BT audio on the Pi3).
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
The Ux500 boards may have an RMI4 unit, and the DT fragments for
them have been merged upstream. Add it to the defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Lager board shall be the reference platform for the runtime I2C IP
core switcher and for I2C slave support. Enable the needed drivers for
this.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas Lager board shall be a reference platform for the runtime
I2C IP core switcher and for I2C slave support. Enable the needed
drivers for this.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
The realview_smp_defconfig and realview_defconfig got merged into one,
so we are now down to 110 files.
For stm32, we have now added a Kconfig fragment, the first such
file on arch/arm. The purpose here is to have a shared defconfig
file that works for all boards, while the DRAM offset has to be
hardwired on NOMMU machines at compile time.
The Exynos defconfig changes depend on changes in the RTC tree,
so this is pulled in here, but has already been merged into 4.6 now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=d4mQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
The realview_smp_defconfig and realview_defconfig got merged into one,
so we are now down to 110 files.
For stm32, we have now added a Kconfig fragment, the first such file
on arch/arm. The purpose here is to have a shared defconfig file that
works for all boards, while the DRAM offset has to be hardwired on
NOMMU machines at compile time.
The Exynos defconfig changes depend on changes in the RTC tree, so
this is pulled in here, but has already been merged into 4.6 now"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
ARM: imx_v4_v5_defconfig: Enable initramfs support
ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
ARM: multi_v7_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable LP872x regulator support
ARM: mxs_defconfig: Enable initramfs support
ARM: mxs_defconfig: Cleanup mxs_defconfig
ARM: multi_v5_defconfig: Enable initramfs support
ARM: multi_v5_defconfig: Cleanup multi_v5_defconfig
ARM: multi_v7_defconfig: enable useful configurations for Vybrid
ARM: multi_v7_defconfig: add MACH_ARTPEC6
ARM: omap2plus_defconfig: Enable AT24 eeprom
ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
ARM: omap2plus_defconfig: Enable ISP support and dependencies
ARM: omap2plus_defconfig: Enable OMAP IOMMU support
ARM: socfpga_defconfig: enable support for initramfs/initrd support
ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig
ARM: multi_v7_defconfig: Enable BCM283x
ARM: bcm2835_defconfig: Enable RPi power domain driver
ARM: bcm2835_defconfig: Enable RPi firmware driver
ARM: bcm2835_defconfig: enable ARMv7 support
...
Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added
- Allwinner A64 SoC
- Annapurna Labs Alpine SoCs
- Broadcom Vulcan
- Marvell Armada 3700 SoCs
- Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fO+Q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added:
* Allwinner A64 SoC
* Annapurna Labs Alpine SoCs
* Broadcom Vulcan
* Marvell Armada 3700 SoCs
* Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
arm64: defconfig: Add Qualcomm sdhci and restart functionality
ARM64: Enable Amlogic Meson GXBaby platform
arm64: defconfig: Enable Samsung MFD and related configs
arm64: alpine: select the Alpine MSI controller driver
arm64: defconfig: enable the Alpine family
arm64: add Alpine SoC family
arm64: defconfig: Enable exynos thermal config
arm64: add defconfig options for Allwinner SoCs
arm64: defconfig: Enable DesignWare APB GPIO controller
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
MAINTAINERS: Add entry for Broadcom Vulcan SoC
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: defconfig: Add Broadcom Vulcan to defconfig
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
...
Newly added support for additional SoCs:
- Axis Artpec-6 SoC family
- Allwinner A83T SoC
- Mediatek MT7623
- NXP i.MX6QP SoC
- ST Microelectronics stm32f469 microcontroller
New features:
- SMP support for Mediatek mt2701
- Big-endian support for NXP i.MX
- DaVinci now uses the new DMA engine dma_slave_map
- OMAP now uses the new DMA engine dma_slave_map
- earlyprintk support for palmchip uart on mach-tango
- delay timer support for orion
Other:
- Exynos PMU driver moved out to drivers/soc/
- Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ynNj
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Newly added support for additional SoCs:
- Axis Artpec-6 SoC family
- Allwinner A83T SoC
- Mediatek MT7623
- NXP i.MX6QP SoC
- ST Microelectronics stm32f469 microcontroller
New features:
- SMP support for Mediatek mt2701
- Big-endian support for NXP i.MX
- DaVinci now uses the new DMA engine dma_slave_map
- OMAP now uses the new DMA engine dma_slave_map
- earlyprintk support for palmchip uart on mach-tango
- delay timer support for orion
Other:
- Exynos PMU driver moved out to drivers/soc/
- Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
uniphier"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: uniphier: rework SMP code to support new System Bus binding
ARM: uniphier: add missing of_node_put()
ARM: at91: avoid defining CONFIG_* symbols in source code
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
dmaengine: pxa_dma: fix the maximum requestor line
ARM: alpine: select the Alpine MSI controller driver
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
ARM: s3c24xx: Avoid warning for inb/outb
ARM: zynq: Move early printk virtual address to vmalloc area
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
ARM: SAMSUNG: Remove unused register offset definition
ARM: EXYNOS: Cleanup header files inclusion
drivers: soc: samsung: Enable COMPILE_TEST
MAINTAINERS: Add maintainers entry for drivers/soc/samsung
...
As usual, we queue up a few fixes that don't seem urgent enough to go in
through -rc.
- a number of randconfig warning fixes from Arnd
- various small fixes for OMAP
- one somewhat larger patch to restore the OMAP3 cpuidle
tuning that was lost in a cleanup
- a small regression fix for cns3xxx PCI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YJmM
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-urgent fixes from Arnd Bergmann:
"As usual, we queue up a few fixes that don't seem urgent enough to go
in through -rc.
- a number of randconfig warning fixes from Arnd
- various small fixes for OMAP
- one somewhat larger patch to restore the OMAP3 cpuidle tuning that
was lost in a cleanup
- a small regression fix for cns3xxx PCI"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
CNS3xxx: Fix PCI cns3xxx_write_config()
MAINTAINERS: unify email addrs for Kevin Hilman
CNS3xxx: remove unused *_VIRT definitions
ARM: OMAP2+: Fix hwmod clock for l4_ls
soc: TI knav_qmss: fix dma_addr_t printing
ARM: prima2: always enable reset controller
ARM: socfpga: hide unused functions
ARM: ux500: fix ureachable iounmap()
ARM: ks8695: fix __initdata annotation
ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused
ARM: mv78xx0: avoid unused function warning
ARM: orion: only select I2C_BOARDINFO when using I2C
ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
ARM: OMAP3: Add cpuidle parameters table for omap3430
ARM: davinci: make I2C support optional
ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
ARM: davinci: avoid unused mityomapl138_pn_info variable
ARM: davinci: limit DT support to DA850
ARM: DRA7: hwmod: Add reset data for PCIe
ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
...
Pull networking updates from David Miller:
"Highlights:
1) Support more Realtek wireless chips, from Jes Sorenson.
2) New BPF types for per-cpu hash and arrap maps, from Alexei
Starovoitov.
3) Make several TCP sysctls per-namespace, from Nikolay Borisov.
4) Allow the use of SO_REUSEPORT in order to do per-thread processing
of incoming TCP/UDP connections. The muxing can be done using a
BPF program which hashes the incoming packet. From Craig Gallek.
5) Add a multiplexer for TCP streams, to provide a messaged based
interface. BPF programs can be used to determine the message
boundaries. From Tom Herbert.
6) Add 802.1AE MACSEC support, from Sabrina Dubroca.
7) Avoid factorial complexity when taking down an inetdev interface
with lots of configured addresses. We were doing things like
traversing the entire address less for each address removed, and
flushing the entire netfilter conntrack table for every address as
well.
8) Add and use SKB bulk free infrastructure, from Jesper Brouer.
9) Allow offloading u32 classifiers to hardware, and implement for
ixgbe, from John Fastabend.
10) Allow configuring IRQ coalescing parameters on a per-queue basis,
from Kan Liang.
11) Extend ethtool so that larger link mode masks can be supported.
From David Decotigny.
12) Introduce devlink, which can be used to configure port link types
(ethernet vs Infiniband, etc.), port splitting, and switch device
level attributes as a whole. From Jiri Pirko.
13) Hardware offload support for flower classifiers, from Amir Vadai.
14) Add "Local Checksum Offload". Basically, for a tunneled packet
the checksum of the outer header is 'constant' (because with the
checksum field filled into the inner protocol header, the payload
of the outer frame checksums to 'zero'), and we can take advantage
of that in various ways. From Edward Cree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
net/mlx4_core: Fix backward compatibility on VFs
phy: mdio-thunder: Fix some Kconfig typos
lan78xx: add ndo_get_stats64
lan78xx: handle statistics counter rollover
RDS: TCP: Remove unused constant
RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
net: smc911x: convert pxa dma to dmaengine
team: remove duplicate set of flag IFF_MULTICAST
bonding: remove duplicate set of flag IFF_MULTICAST
net: fix a comment typo
ethernet: micrel: fix some error codes
ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
bpf, dst: add and use dst_tclassid helper
bpf: make skb->tc_classid also readable
net: mvneta: bm: clarify dependencies
cls_bpf: reset class and reuse major in da
ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
ldmvsw: Add ldmvsw.c driver code
...
Pull security layer updates from James Morris:
"There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
fixes scattered across the subsystem.
IMA now requires signed policy, and that policy is also now measured
and appraised"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
X.509: Make algo identifiers text instead of enum
akcipher: Move the RSA DER encoding check to the crypto layer
crypto: Add hash param to pkcs1pad
sign-file: fix build with CMS support disabled
MAINTAINERS: update tpmdd urls
MODSIGN: linux/string.h should be #included to get memcpy()
certs: Fix misaligned data in extra certificate list
X.509: Handle midnight alternative notation in GeneralizedTime
X.509: Support leap seconds
Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
X.509: Fix leap year handling again
PKCS#7: fix unitialized boolean 'want'
firmware: change kernel read fail to dev_dbg()
KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
KEYS: Reserve an extra certificate symbol for inserting without recompiling
modsign: hide openssl output in silent builds
tpm_tis: fix build warning with tpm_tis_resume
ima: require signed IMA policy
ima: measure and appraise the IMA policy itself
ima: load policy using path
...
All the drivers support multiple chips, but mv88e6123_61_65 is the
only one that reflects this in its naming. Change it to be consistent
with the other drivers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----------
- Enable GPIO led driver in stm32_defconfig
- Introduce a config fragment to override RAM base address
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dBNt
-----END PGP SIGNATURE-----
Merge tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/defconfig
Merge "STM32 defconfig updates for v4.6 #1" from Maxime Coquelin:
Highlights:
-----------
- Enable GPIO led driver in stm32_defconfig
- Introduce a config fragment to override RAM base address
* tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: configs: Add new config fragment to change RAM start point
ARM: config: Enable GPIO Led driver in stm32_defconfig
for v4.6 merge window:
- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
decoder
- Enable at24 eeprom for revision detection on beagle-x15
- Enable LP872x regulator for both omap2plus_defconfig and
multi_v7_defconfig as it's needed at least by LG Optimus
Black
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JVC1
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig changes for v4.6 merge window" from Tony Lindgren:
Defconfig changes for omap2plus_defconfig and multi_v7_defconfig
for v4.6 merge window:
- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
decoder
- Enable at24 eeprom for revision detection on beagle-x15
- Enable LP872x regulator for both omap2plus_defconfig and
multi_v7_defconfig as it's needed at least by LG Optimus
Black
* tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable AT24 eeprom
ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
ARM: omap2plus_defconfig: Enable ISP support and dependencies
ARM: omap2plus_defconfig: Enable OMAP IOMMU support
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T9z9
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Merge "ARM64 defconfig changes for Exynos based boards for v4.6" from Krzysztof Kozlowski:
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
* tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung MFD and related configs
arm64: defconfig: Enable exynos thermal config
ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
rtc: max77686: Cleanup and reduce dmesg output
rtc: Remove Maxim 77802 driver
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: max77686: Fix unsupported year message
rtc: max77686: Add max77802 support
rtc: max77686: Add an indirection level to access RTC registers
rtc: max77686: Use a driver data struct instead hard-coded values
rtc: max77686: Use usleep_range() instead of msleep()
rtc: max77686: Use ARRAY_SIZE() instead of current array length
rtc: max77686: Fix max77686_rtc_read_alarm() return value
ARM: exynos_defconfig: Enable s5p-secss driver
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Regenerate imx_v4_v5_defconfig by running:
make imx_v4_v5_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/imx_v4_v5_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lBYC
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux into next/soc
Merge "pxa changes for v4.6 cycle" from Robert Jarzmik:
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
* tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux:
dmaengine: pxa_dma: fix the maximum requestor line
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: pxa: pxa3xx device-tree support cleanup
ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
ARM: pxa: fix building without IWMMXT
ARM: pxa: move extern declarations to pm.h
ARM: pxa: always select one of the two CPU types
ARM: pxa: don't select GPIO_SYSFS for MIOA701
ARM: pxa: mark unused eseries code as __maybe_unused
ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
ARM: pxa: define clock registers as __iomem
A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs,
most notably the USB OTG that is finally enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6Cse
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 4.6" from Maxime Ripard:
A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs,
most notably the USB OTG that is finally enabled.
* tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glue
ARM: multi_v7_defconfig: Enable A10 audio codec driver as module
ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue
ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be used
ARM: sunxi_defconfig: Enable A10 audio codec driver
ARM: sunxi_defconfig: Enable sunxi IR driver
enable SRAM support in mvebu_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbQXRoACgkQCwYYjhRyO9XuDwCggDihNDvg28PdaATDslAWggt0
uJoAoIZioUyUwXZ2a0artKxtvxgBXme0
=+WFN
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "mvebu defconfig for 4.6 (part 2)" from Gregory CLEMENT:
enable SRAM support in mvebu_v7_defconfig
* tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: enable SRAM support in mvebu_v7_defconfig
The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Regenerate mxs_defconfig by running:
make mxs_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/mxs_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Merge "Broadcom defconfig changes for 4.6" from Florian Fainelli:
This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Daniel enables all that is required to get the BCM283x (Raspberry Pi and
Raspberry Pi 2) SoCs to boot with multi_v7_defconfig
- Stefan enables the Raspberry Pi firmware driver and power domain drivers
in bcm2835_defconfig
- Stephen refreshes the bcm2835_defconfig, disables DEBUG_LL, and turns on
ARMv7 support which is needed for BCM2836 (Raspberry Pi 2)
* tag 'arm-soc/for-4.6/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable BCM283x
ARM: bcm2835_defconfig: Enable RPi power domain driver
ARM: bcm2835_defconfig: Enable RPi firmware driver
ARM: bcm2835_defconfig: enable ARMv7 support
ARM: bcm2835_defconfig: disable DEBUG_LL
ARM: bcm2835_defconfig: rebuild on next-20160205
This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Regenerate multi_v5_defconfig by running:
make multi_v5_defconfig
make savedefconfig
mv defconfig arch/arm/configs/multi_v5_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Enable initrd/initramfs support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sOpf
-----END PGP SIGNATURE-----
Merge tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig
SoCFPGA defconfig update for v4.6
-Enable initrd/initramfs support
* tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga_defconfig: enable support for initramfs/initrd support
Signed-off-by: Olof Johansson <olof@lixom.net>
- Addition of sama5d2 ADC to sama5_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8vI6
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig
defconfig update for 4.6:
- Addition of sama5d2 ADC to sama5_defconfig
* tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
1. exynos defconfig:
a. Enable NEON and accelerated crypto,
b. Enable s5p-secss driver (Security SubSystem block for accelerating
some cryptographic operations),
2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver
was combined into existing rtc-max77686 driver. This depends on changes
from RTC tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SU+0
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.6:
1. exynos defconfig:
a. Enable NEON and accelerated crypto,
b. Enable s5p-secss driver (Security SubSystem block for accelerating
some cryptographic operations),
2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver
was combined into existing rtc-max77686 driver. This depends on changes
from RTC tree.
* tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
rtc: max77686: Cleanup and reduce dmesg output
rtc: Remove Maxim 77802 driver
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: max77686: Fix unsupported year message
rtc: max77686: Add max77802 support
rtc: max77686: Add an indirection level to access RTC registers
rtc: max77686: Use a driver data struct instead hard-coded values
rtc: max77686: Use usleep_range() instead of msleep()
rtc: max77686: Use ARRAY_SIZE() instead of current array length
rtc: max77686: Fix max77686_rtc_read_alarm() return value
ARM: exynos_defconfig: Enable s5p-secss driver
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Olof Johansson <olof@lixom.net>
so we only need one defconfig for RealView, then adds
USB mass storage configuration.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tRLy
-----END PGP SIGNATURE-----
Merge tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig
This makes the RealView defconfig select SMP on UP
so we only need one defconfig for RealView, then adds
USB mass storage configuration.
* tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: realview: enable USB storage in the defconfig
ARM: realview: delete realview-smp_defconfig
ARM: realview: activate SMP on the default defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
AT24 compatible eeproms are used in BB family and X15 boards.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3
ISP so enable support for its driver as a module to be able to test it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate
camera images processing. The ISP driver implements V4L2, Media Controller
and V4L2 sub-dev interfaces so enable support for the driver and all these
dependencies to allow video capture to be tested using this HW IP block.
Also, disable the I2C ancillary drivers auto-select option since the media
driver does not auto-select the ancillary devices that are attached to the
bridge because this depends on what's present in the supported OMAP boards.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so
enable it to be able to test the OMAP3 Image Signal Processor (ISP).
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the BCM2835/BCM2836 options required to boot Raspberry Pi.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
After enabling the Raspberry Pi firmware driver which allow us to handle
power domains for USB or graphics.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This enables the Raspberry Pi driver for GPU specific features.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This way the kernel works on both RPi0/1 and RPi2 even with earlyprintk
in the kernel cmdline; the two hardware platforms use different physical
addresses for peripherals, so the same DEBUG_LL configuration won't work
on both. If someone needs DEBUG_LL support, they can enable it locally.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
This separates explicit changes desired in later patches from "automatic"
or irrelevant changes caused solely by Kconfig changes.
make ARCH=arm bcm2835_defconfig
make ARCH=arm savedefconfig
mv defconfig arch/arm/configs/bcm2835_defconfig
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Rather than duplicate a defconfig for each difference
between platforms, we can choose to pick a basic defconfig and
manipulate it at run-time using config fragments. Here we're
adding a new fragment to over-ride the RAM start point to 0x0.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
SRAM support is needed for the hardware buffer management used by the
mvneta driver.
[gregory.clement@free-electrons.com: add commit log]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller support
- FTM PWM driver
- DSPI SPI driver
- Colibri VF50 Touchscreen support.
Beside that, enable useful configurations such as IIO hwmon support
(used in i.MX 23/28, patch pending for Vybrid), PWM LED support and
CPU idle support.
Regenerated config using savedefconfig (which removes some configs
which are now enabled by default).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select the sahara crypto driver that is used on i.MX53.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* fix omap2plus_defconfig to enable omapfb as it was in v4.4
* ocfb: fix timings for margins
* s6e8ax0, da8xx-fb: fix compile warnings
* mmp: fix build failure caused by bad printk parameters
* imxfb: fix clock issue which kept the display off
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kfw6
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fix omap2plus_defconfig to enable omapfb as it was in v4.4
- ocfb: fix timings for margins
- s6e8ax0, da8xx-fb: fix compile warnings
- mmp: fix build failure caused by bad printk parameters
- imxfb: fix clock issue which kept the display off
* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: fbdev: imxfb: Provide a reset mechanism
fbdev: mmp: print IRQ resource using %pR format string
fbdev: da8xx-fb: remove incorrect type cast
fbdev: s6e8ax0: avoid unused function warnings
ocfb: fix tgdel and tvdel timing parameters
ARM: omap2plus_defconfig: update display configs
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now
mandatory if the keyrings facility is enabled (it's used by libkeyutils in
userspace).
The defconfig references were removed with:
perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \
`git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y`
and the integrity Kconfig fixed by hand.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andreas Ziegler <andreas.ziegler@fau.de>
cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role
controller for USB OTG.
Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode. This requires the
NOP USB transceiver driver, which is also enabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
It is not uncommon to boot a root filesystem from a USB
pendrive and similar, so enable USB mass storage, backed
by SCSI and SD block devices in the RealView defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The realview has two defconfigs: realview_defconfig and
realview-smp_defconfig. We now have working SMP_ON_UP so
make them equal so we can delete the -smp variant. For
some reason NO_HZ_FULL was missing from the plain
realview_defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The A10 audio codec driver supports the on-chip audio codec found on
Allwinner A10, A10s, A13, A20 SoCs.
Build it as a module, since it is not critical.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB high speed
dual role controller for USB OTG.
Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode.
This patch only enables the driver core and Allwinner platform support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sunxi_defconfig already enables INPUT_AXP20X_PEK, but the device is not
exposed to userspace. Enable INPUT_EVDEV so it is.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A consumer IR receiver is commonly found on Allwinner SoC based
development boards and set top boxes. The driver has been available
for some time. Enable it by default.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
- Enable sound module needed for OpenRD in mvebu_v5_defconfig
- Add USB nop xceiv support in mvebu_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAla4pEgACgkQCwYYjhRyO9V5swCdE+ycsxftoA4+3OGHWn4yAOdb
MukAoI41b7PVQQM3gX1+sBuKe0X/AHTG
=UEnL
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.6-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu defconfig for 4.6 (part 1)
- Enable sound module needed for OpenRD in mvebu_v5_defconfig
- Add USB nop xceiv support in mvebu_v7_defconfig
* tag 'mvebu-defconfig-4.6-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v5_defconfig: Enable sound module needed for OpenRD
ARM: mvebu: Add USB nop xceiv support in mvebu_v7_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable XHCI_RCAR
* Do not enable CONFIG_CPU_BPREDICT_DISABLE
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=e/Gj
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.6
* Enable XHCI_RCAR
* Do not enable CONFIG_CPU_BPREDICT_DISABLE
* tag 'renesas-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable XHCI_RCAR
ARM: shmobile: enable XHCI_RCAR in defconfig
ARM: shmobile: defconfig: Do not enable CONFIG_CPU_BPREDICT_DISABLE
Signed-off-by: Olof Johansson <olof@lixom.net>
The driver has been removed so the Kconfig symbol is not valid anymore.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
