Commit Graph

72 Commits

Author SHA1 Message Date
David Ahern
b75cc8f90f net/ipv6: Pass skb to route lookup
IPv6 does path selection for multipath routes deep in the lookup
functions. The next patch adds L4 hash option and needs the skb
for the forward path. To get the skb to the relevant FIB lookup
functions it needs to go through the fib rules layer, so add a
lookup_data argument to the fib_lookup_arg struct.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 13:04:22 -05:00
Kirill Tkhai
5ecc29550a net: Convert vti6_net_ops
These pernet_operations are similar to ip6_tnl_net_ops. Exit method
unregisters all net vti6 tunnels, and it looks like another
pernet_operations are not interested in foreign net vti6 list.
Init method registers netdevice. So, it's possible to mark them async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 11:01:38 -05:00
David S. Miller
3e3ab9ccca Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29 10:15:51 -05:00
Nicolas Dichtel
f15ca723c1 net: don't call update_pmtu unconditionally
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at           (null)"

Let's add a helper to check if update_pmtu is available before calling it.

Fixes: 52a589d51f ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff44 ("vxlan: update skb dst pmtu on tx path")
CC: Roman Kapl <code@rkapl.cz>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:27:34 -05:00
Alexey Kodanev
53c81e95df ip6_vti: adjust vti mtu according to mtu of lower device
LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over
ip6_vti that require fragmentation and the underlying device has an
MTU smaller than 1500 plus some extra space for headers. This happens
because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating
it depending on a destination address or link parameter. Further
attempts to send UDP packets may succeed because pmtu gets updated on
ICMPV6_PKT_TOOBIG in vti6_err().

In case the lower device has larger MTU size, e.g. 9000, ip6_vti works
but not using the possible maximum size, output packets have 1500 limit.

The above cases require manual MTU setup after ip6_vti creation. However
ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev().

Here is the example when the lower device MTU is set to 9000:

  # ip a sh ltp_ns_veth2
      ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ...
        inet 10.0.0.2/24 scope global ltp_ns_veth2
        inet6 fd00::2/64 scope global

  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ...
        link/tunnel6 fd00::2 peer fd00::1

After the patch:
  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ...
        link/tunnel6 fd00::2 peer fd00::1

Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20 11:52:32 -05:00
David S. Miller
53954cf8c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 18:19:22 -07:00
Alexey Kodanev
36f6ee22d2 vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmit
When running LTP IPsec tests, KASan might report:

BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0
...
Call Trace:
  <IRQ>
  dump_stack+0x63/0x89
  print_address_description+0x7c/0x290
  kasan_report+0x28d/0x370
  ? vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
  __asan_report_load4_noabort+0x19/0x20
  vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
  ? vti_init_net+0x190/0x190 [ip_vti]
  ? save_stack_trace+0x1b/0x20
  ? save_stack+0x46/0xd0
  dev_hard_start_xmit+0x147/0x510
  ? icmp_echo.part.24+0x1f0/0x210
  __dev_queue_xmit+0x1394/0x1c60
...
Freed by task 0:
  save_stack_trace+0x1b/0x20
  save_stack+0x46/0xd0
  kasan_slab_free+0x70/0xc0
  kmem_cache_free+0x81/0x1e0
  kfree_skbmem+0xb1/0xe0
  kfree_skb+0x75/0x170
  kfree_skb_list+0x3e/0x60
  __dev_queue_xmit+0x1298/0x1c60
  dev_queue_xmit+0x10/0x20
  neigh_resolve_output+0x3a8/0x740
  ip_finish_output2+0x5c0/0xe70
  ip_finish_output+0x4ba/0x680
  ip_output+0x1c1/0x3a0
  xfrm_output_resume+0xc65/0x13d0
  xfrm_output+0x1e4/0x380
  xfrm4_output_finish+0x5c/0x70

Can be fixed if we get skb->len before dst_output().

Fixes: b9959fd3b0 ("vti: switch to new ip tunnel code")
Fixes: 22e1b23daf ("vti6: Support inter address family tunneling.")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 09:58:21 -07:00
Eric Dumazet
bb401caefe ipv6: speedup ipv6 tunnels dismantle
Implement exit_batch() method to dismantle more devices
per round.

(rtnl_lock() ...
 unregister_netdevice_many() ...
 rtnl_unlock())

Tested:
$ cat add_del_unshare.sh
for i in `seq 1 40`
do
 (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) &
done
wait ; grep net_namespace /proc/slabinfo

Before patch :
$ time ./add_del_unshare.sh
net_namespace        110    267   5504    1    2 : tunables    8    4    0 : slabdata    110    267      0

real    3m25.292s
user    0m0.644s
sys     0m40.153s

After patch:

$ time ./add_del_unshare.sh
net_namespace        126    282   5504    1    2 : tunables    8    4    0 : slabdata    126    282      0

real	1m38.965s
user	0m0.688s
sys	0m37.017s

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19 16:32:23 -07:00
Florian Westphal
6b1c42e972 vti: revert flush x-netns xfrm cache when vti interface is removed
flow cache is removed in next commit.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18 11:13:41 -07:00
Matthias Schiffer
a8b8a889e3 net: add netlink_ext_ack argument to rtnl_link_ops.validate
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:22 -04:00
Matthias Schiffer
ad744b223c net: add netlink_ext_ack argument to rtnl_link_ops.changelink
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:22 -04:00
Matthias Schiffer
7a3f4a1851 net: add netlink_ext_ack argument to rtnl_link_ops.newlink
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:21 -04:00
David S. Miller
cf124db566 net: Fix inconsistent teardown and release of private netdev state.
Network devices can allocate reasources and private memory using
netdev_ops->ndo_init().  However, the release of these resources
can occur in one of two different places.

Either netdev_ops->ndo_uninit() or netdev->destructor().

The decision of which operation frees the resources depends upon
whether it is necessary for all netdev refs to be released before it
is safe to perform the freeing.

netdev_ops->ndo_uninit() presumably can occur right after the
NETDEV_UNREGISTER notifier completes and the unicast and multicast
address lists are flushed.

netdev->destructor(), on the other hand, does not run until the
netdev references all go away.

Further complicating the situation is that netdev->destructor()
almost universally does also a free_netdev().

This creates a problem for the logic in register_netdevice().
Because all callers of register_netdevice() manage the freeing
of the netdev, and invoke free_netdev(dev) if register_netdevice()
fails.

If netdev_ops->ndo_init() succeeds, but something else fails inside
of register_netdevice(), it does call ndo_ops->ndo_uninit().  But
it is not able to invoke netdev->destructor().

This is because netdev->destructor() will do a free_netdev() and
then the caller of register_netdevice() will do the same.

However, this means that the resources that would normally be released
by netdev->destructor() will not be.

Over the years drivers have added local hacks to deal with this, by
invoking their destructor parts by hand when register_netdevice()
fails.

Many drivers do not try to deal with this, and instead we have leaks.

Let's close this hole by formalizing the distinction between what
private things need to be freed up by netdev->destructor() and whether
the driver needs unregister_netdevice() to perform the free_netdev().

netdev->priv_destructor() performs all actions to free up the private
resources that used to be freed by netdev->destructor(), except for
free_netdev().

netdev->needs_free_netdev is a boolean that indicates whether
free_netdev() should be done at the end of unregister_netdevice().

Now, register_netdevice() can sanely release all resources after
ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit()
and netdev->priv_destructor().

And at the end of unregister_netdevice(), we invoke
netdev->priv_destructor() and optionally call free_netdev().

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07 15:53:24 -04:00
Craig Gallek
0a473b82cb ip6_tunnel: Allow policy-based routing through tunnels
This feature allows the administrator to set an fwmark for
packets traversing a tunnel.  This allows the use of independent
routing tables for tunneled packets without the use of iptables.

Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21 13:21:30 -04:00
David S. Miller
8474c8caac Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2017-03-06

1) Fix lockdep splat on xfrm policy subsystem initialization.
   From Florian Westphal.

2) When using socket policies on IPv4-mapped IPv6 addresses,
   we access the flow informations of the wrong address family
   what leads to an out of bounds access. Fix this by using
   the family we get with the dst_entry, like we do it for the
   standard policy lookup.

3) vti6 can report a PMTU below IPV6_MIN_MTU. Fix this by
   adding a check for that before sending a ICMPV6_PKT_TOOBIG
   message.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07 15:00:37 -08:00
David Forster
7dcdf941cd vti6: return GRE_KEY for vti6
Align vti6 with vti by returning GRE_KEY flag. This enables iproute2
to display tunnel keys on "ip -6 tunnel show"

Signed-off-by: David Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-24 11:42:55 -05:00
Steffen Klassert
e3dc847a5f vti6: Don't report path MTU below IPV6_MIN_MTU.
In vti6_xmit(), the check for IPV6_MIN_MTU before we
send a ICMPV6_PKT_TOOBIG message is missing. So we might
report a PMTU below 1280. Fix this by adding the required
check.

Fixes: ccd740cbc6 ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-16 07:51:42 +01:00
Felix Jia
45ce0fd19d net/ipv6: support more tunnel interfaces for EUI64 link-local generation
Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27 10:25:34 -05:00
David Forster
93e246f783 vti6: fix device register to report IFLA_INFO_KIND
vti6 interface is registered before the rtnl_link_ops block
is attached. As a result the resulting RTM_NEWLINK is missing
IFLA_INFO_KIND. Re-order attachment of rtnl_link_ops block to fix.

Signed-off-by: Dave Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 16:09:09 -05:00
David S. Miller
2745529ac7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Couple conflicts resolved here:

1) In the MACB driver, a bug fix to properly initialize the
   RX tail pointer properly overlapped with some changes
   to support variable sized rings.

2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
   overlapping with a reorganization of the driver to support
   ACPI, OF, as well as PCI variants of the chip.

3) In 'net' we had several probe error path bug fixes to the
   stmmac driver, meanwhile a lot of this code was cleaned up
   and reorganized in 'net-next'.

4) The cls_flower classifier obtained a helper function in
   'net-next' called __fl_delete() and this overlapped with
   Daniel Borkamann's bug fix to use RCU for object destruction
   in 'net'.  It also overlapped with Jiri's change to guard
   the rhashtable_remove_fast() call with a check against
   tc_skip_sw().

5) In mlx4, a revert bug fix in 'net' overlapped with some
   unrelated changes in 'net-next'.

6) In geneve, a stale header pointer after pskb_expand_head()
   bug fix in 'net' overlapped with a large reorganization of
   the same code in 'net-next'.  Since the 'net-next' code no
   longer had the bug in question, there was nothing to do
   other than to simply take the 'net-next' hunks.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03 12:29:53 -05:00
Alexey Dobriyan
c7d03a00b5 netns: make struct pernet_operations::id unsigned int
Make struct pernet_operations::id unsigned.

There are 2 reasons to do so:

1)
This field is really an index into an zero based array and
thus is unsigned entity. Using negative value is out-of-bound
access by definition.

2)
On x86_64 unsigned 32-bit data which are mixed with pointers
via array indexing or offsets added or subtracted to pointers
are preffered to signed 32-bit data.

"int" being used as an array index needs to be sign-extended
to 64-bit before being used.

	void f(long *p, int i)
	{
		g(p[i]);
	}

  roughly translates to

	movsx	rsi, esi
	mov	rdi, [rsi+...]
	call 	g

MOVSX is 3 byte instruction which isn't necessary if the variable is
unsigned because x86_64 is zero extending by default.

Now, there is net_generic() function which, you guessed it right, uses
"int" as an array index:

	static inline void *net_generic(const struct net *net, int id)
	{
		...
		ptr = ng->ptr[id - 1];
		...
	}

And this function is used a lot, so those sign extensions add up.

Patch snipes ~1730 bytes on allyesconfig kernel (without all junk
messing with code generation):

	add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)

Unfortunately some functions actually grow bigger.
This is a semmingly random artefact of code generation with register
allocator being used differently. gcc decides that some variable
needs to live in new r8+ registers and every access now requires REX
prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be
used which is longer than [r8]

However, overall balance is in negative direction:

	add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)
	function                                     old     new   delta
	nfsd4_lock                                  3886    3959     +73
	tipc_link_build_proto_msg                   1096    1140     +44
	mac80211_hwsim_new_radio                    2776    2808     +32
	tipc_mon_rcv                                1032    1058     +26
	svcauth_gss_legacy_init                     1413    1429     +16
	tipc_bcbase_select_primary                   379     392     +13
	nfsd4_exchange_id                           1247    1260     +13
	nfsd4_setclientid_confirm                    782     793     +11
		...
	put_client_renew_locked                      494     480     -14
	ip_set_sockfn_get                            730     716     -14
	geneve_sock_add                              829     813     -16
	nfsd4_sequence_done                          721     703     -18
	nlmclnt_lookup_host                          708     686     -22
	nfsd4_lockt                                 1085    1063     -22
	nfs_get_client                              1077    1050     -27
	tcf_bpf_init                                1106    1076     -30
	nfsd4_encode_fattr                          5997    5930     -67
	Total: Before=154856051, After=154854321, chg -0.00%

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18 10:59:15 -05:00
Lorenzo Colitti
e2d118a1cb net: inet: Support UID-based routing in IP protocols.
- Use the UID in routing lookups made by protocol connect() and
  sendmsg() functions.
- Make sure that routing lookups triggered by incoming packets
  (e.g., Path MTU discovery) take the UID of the socket into
  account.
- For packets not associated with a userspace socket, (e.g., ping
  replies) use UID 0 inside the user namespace corresponding to
  the network namespace the socket belongs to. This allows
  all namespaces to apply routing and iptables rules to
  kernel-originated traffic in that namespaces by matching UID 0.
  This is better than using the UID of the kernel socket that is
  sending the traffic, because the UID of kernel sockets created
  at namespace creation time (e.g., the per-processor ICMP and
  TCP sockets) is the UID of the user that created the socket,
  which might not be mapped in the namespace.

Tested: compiles allnoconfig, allyesconfig, allmodconfig
Tested: https://android-review.googlesource.com/253302
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04 14:45:23 -04:00
Jarod Wilson
b96f9afee4 ipv4/6: use core net MTU range checking
ipv4/ip_tunnel:
- min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len - t_hlen
- preserve all ndo_change_mtu checks for now to prevent regressions

ipv6/ip6_tunnel:
- min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len
- preserve all ndo_change_mtu checks for now to prevent regressions

ipv6/ip6_vti:
- min_mtu = 1280, max_mtu = 65535
- remove redundant vti6_change_mtu

ipv6/sit:
- min_mtu = 1280, max_mtu = 0xFFF8 - t_hlen
- remove redundant ipip6_tunnel_change_mtu

CC: netdev@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:10 -04:00
Nicolas Dichtel
7f92083eb5 vti6: flush x-netns xfrm cache when vti interface is removed
This is the same fix than commit a5d0dc810a ("vti: flush x-netns xfrm
cache when vti interface is removed")

This patch fixes a refcnt problem when a x-netns vti6 interface is removed:
unregister_netdevice: waiting for vti6_test to become free. Usage count = 1

Here is a script to reproduce the problem:

ip link set dev ntfp2 up
ip addr add dev ntfp2 2001::1/64
ip link add vti6_test type vti6 local 2001::1 remote 2001::2 key 1
ip netns add secure
ip link set vti6_test netns secure
ip netns exec secure ip link set vti6_test up
ip netns exec secure ip link s lo up
ip netns exec secure ip addr add dev vti6_test 2003::1/64
ip -6 xfrm policy add dir out tmpl src 2001::1 dst 2001::2 proto esp \
	   mode tunnel mark 1
ip -6 xfrm policy add dir in tmpl src 2001::2 dst 2001::1 proto esp \
	   mode tunnel mark 1
ip xfrm state add src 2001::1 dst 2001::2 proto esp spi 1 mode tunnel \
	   enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip xfrm state add src 2001::2 dst 2001::1 proto esp spi 1 mode tunnel \
	   enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip netns exec secure  ping6 -c 4 2003::2
ip netns del secure

CC: Lance Richardson <lrichard@redhat.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-10-11 10:46:44 +02:00
David S. Miller
d6989d4bbe Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-09-23 06:46:57 -04:00
Nicolas Dichtel
63c43787d3 vti6: fix input path
Since commit 1625f45299, vti6 is broken, all input packets are dropped
(LINUX_MIB_XFRMINNOSTATES is incremented).

XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling
xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in
xfrm6_rcv_spi().

A new function xfrm6_rcv_tnl() that enables to pass a value to
xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function
is used in several handlers).

CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Fixes: 1625f45299 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-21 10:09:14 +02:00
thomas.zeitlhofer+lkml@ze-it.at
1fb81e09d4 vti: use right inner_mode for inbound inter address family policy checks
In case of inter address family tunneling (IPv6 over vti4 or IPv4 over
vti6), the inbound policy checks in vti_rcv_cb() and vti6_rcv_cb() are
using the wrong address family. As a result, all inbound inter address
family traffic is dropped.

Use the xfrm_ip2inner_mode() helper, as done in xfrm_input() (i.e., also
increment LINUX_MIB_XFRMINSTATEMODEERROR in case of error), to select the
inner_mode that contains the right address family for the inbound policy
checks.

Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-09 09:02:08 +02:00
Jiri Kosina
e87a8f24c9 net: resolve symbol conflicts with generic hashtable.h
This is a preparatory patch for converting qdisc linked list into a
hashtable. As we'll need to include hashtable.h in netdevice.h, we first
have to make sure that this will not introduce symbol conflicts for any of
the netdevice.h users.

Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 17:18:52 -07:00
Paolo Abeni
607f725f6f net: replace dst_cache ip6_tunnel implementation with the generic one
This also fix a potential race into the existing tunnel code, which
could lead to the wrong dst to be permanenty cached:

CPU1:					CPU2:
  <xmit on ip6_tunnel>
  <cache lookup fails>
  dst = ip6_route_output(...)
					<tunnel params are changed via nl>
					dst_cache_reset() // no effect,
							// the cache is empty
  dst_cache_set() // the wrong dst
	// is permanenty stored
	// into the cache

With the new dst implementation the above race is not possible
since the first cache lookup after dst_cache_reset will fail due
to the timestamp check

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16 20:21:48 -05:00
Eric W. Biederman
13206b6bff net: Pass net into dst_output and remove dst_output_okfn
Replace dst_output_okfn with dst_output

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 04:26:54 -07:00
Eric W. Biederman
5a70649e0d net: Merge dst_output and dst_output_sk
Add a sock paramter to dst_output making dst_output_sk superfluous.
Add a skb->sk parameter to all of the callers of dst_output
Have the callers of dst_output_sk call dst_output.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17 17:18:32 -07:00
Steffen Klassert
ccd740cbc6 vti6: Add pmtu handling to vti6_xmit.
We currently rely on the PMTU discovery of xfrm.
However if a packet is localy sent, the PMTU mechanism
of xfrm tries to to local socket notification what
might not work for applications like ping that don't
check for this. So add pmtu handling to vti6_xmit to
report MTU changes immediately.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01 16:03:43 -07:00
Alexander Duyck
d55c670cbc ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call
The vti6_rcv_cb and vti_rcv_cb calls were leaving the skb->mark modified
after completing the function.  This resulted in the original skb->mark
value being lost.  Since we only need skb->mark to be set for
xfrm_policy_check we can pull the assignment into the rcv_cb calls and then
just restore the original mark after xfrm_policy_check has been completed.

Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-28 06:23:32 +02:00
Alexander Duyck
cd5279c194 ip_vti/ip6_vti: Do not touch skb->mark on xmit
Instead of modifying skb->mark we can simply modify the flowi_mark that is
generated as a result of the xfrm_decode_session.  By doing this we don't
need to actually touch the skb->mark and it can be preserved as it passes
out through the tunnel.

Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-28 06:23:31 +02:00
David S. Miller
87ffabb1f0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The dwmac-socfpga.c conflict was a case of a bug fix overlapping
changes in net-next to handle an error pointer differently.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14 15:44:14 -04:00
Yao Xiwei
092a29a40b vti6: fix uninit when using x-netns
When the kernel deleted a vti6 interface, this interface was not removed from
the tunnels list. Thus, when the ip6_vti module was removed, this old interface
was found and the kernel tried to delete it again. This was leading to a kernel
panic.

Fixes: 61220ab349 ("vti6: Enable namespace changing")
Signed-off-by: Yao Xiwei <xiwei.yao@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-07 07:52:28 +02:00
Nicolas Dichtel
ecf2c06a88 ip6tnl,gre6,vti6: implement ndo_get_iflink
Don't use dev->iflink anymore.

CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 14:04:59 -04:00
Jiri Benc
67b61f6c13 netlink: implement nla_get_in_addr and nla_get_in6_addr
Those are counterparts to nla_put_in_addr and nla_put_in6_addr.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Jiri Benc
930345ea63 netlink: implement nla_put_in_addr and nla_put_in6_addr
IP addresses are often stored in netlink attributes. Add generic functions
to do that.

For nla_put_in_addr, it would be nicer to pass struct in_addr but this is
not used universally throughout the kernel, in way too many places __be32 is
used to store IPv4 address.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Ian Morris
53b24b8f94 ipv6: coding style: comparison for inequality with NULL
The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x != NULL and sometimes as x. x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:51:54 -04:00
Ian Morris
63159f29be ipv6: coding style: comparison for equality with NULL
The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x == NULL and sometimes as !x. !x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:51:54 -04:00
Nicolas Dichtel
1728d4fabd tunnels: advertise link netns via netlink
Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 14:32:03 -05:00
David S. Miller
6db70e3e1d Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2014-12-03

1) Fix a set but not used warning. From Fabian Frederick.

2) Currently we make sequence number values available to userspace
   only if we use ESN. Make the sequence number values also available
   for non ESN states. From Zhi Ding.

3) Remove socket policy hashing. We don't need it because socket
   policies are always looked up via a linked list. From Herbert Xu.

4) After removing socket policy hashing, we can use __xfrm_policy_link
   in xfrm_policy_insert. From Herbert Xu.

5) Add a lookup method for vti6 tunnels with wildcard endpoints.
   I forgot this when I initially implemented vti6.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08 21:30:21 -05:00
David S. Miller
60b7379dc5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-11-29 20:47:48 -08:00
lucien
20ea60ca99 ip_tunnel: the lack of vti_link_ops' dellink() cause kernel panic
Now the vti_link_ops do not point the .dellink, for fb tunnel device
(ip_vti0), the net_device will be removed as the default .dellink is
unregister_netdevice_queue,but the tunnel still in the tunnel list,
then if we add a new vti tunnel, in ip_tunnel_find():

        hlist_for_each_entry_rcu(t, head, hash_node) {
                if (local == t->parms.iph.saddr &&
                    remote == t->parms.iph.daddr &&
                    link == t->parms.link &&
==>                 type == t->dev->type &&
                    ip_tunnel_key_match(&t->parms, flags, key))
                        break;
        }

the panic will happen, cause dev of ip_tunnel *t is null:
[ 3835.072977] IP: [<ffffffffa04103fd>] ip_tunnel_find+0x9d/0xc0 [ip_tunnel]
[ 3835.073008] PGD b2c21067 PUD b7277067 PMD 0
[ 3835.073008] Oops: 0000 [#1] SMP
.....
[ 3835.073008] Stack:
[ 3835.073008]  ffff8800b72d77f0 ffffffffa0411924 ffff8800bb956000 ffff8800b72d78e0
[ 3835.073008]  ffff8800b72d78a0 0000000000000000 ffffffffa040d100 ffff8800b72d7858
[ 3835.073008]  ffffffffa040b2e3 0000000000000000 0000000000000000 0000000000000000
[ 3835.073008] Call Trace:
[ 3835.073008]  [<ffffffffa0411924>] ip_tunnel_newlink+0x64/0x160 [ip_tunnel]
[ 3835.073008]  [<ffffffffa040b2e3>] vti_newlink+0x43/0x70 [ip_vti]
[ 3835.073008]  [<ffffffff8150d4da>] rtnl_newlink+0x4fa/0x5f0
[ 3835.073008]  [<ffffffff812f68bb>] ? nla_strlcpy+0x5b/0x70
[ 3835.073008]  [<ffffffff81508fb0>] ? rtnl_link_ops_get+0x40/0x60
[ 3835.073008]  [<ffffffff8150d11f>] ? rtnl_newlink+0x13f/0x5f0
[ 3835.073008]  [<ffffffff81509cf4>] rtnetlink_rcv_msg+0xa4/0x270
[ 3835.073008]  [<ffffffff8126adf5>] ? sock_has_perm+0x75/0x90
[ 3835.073008]  [<ffffffff81509c50>] ? rtnetlink_rcv+0x30/0x30
[ 3835.073008]  [<ffffffff81529e39>] netlink_rcv_skb+0xa9/0xc0
[ 3835.073008]  [<ffffffff81509c48>] rtnetlink_rcv+0x28/0x30
....

modprobe ip_vti
ip link del ip_vti0 type vti
ip link add ip_vti0 type vti
rmmod ip_vti

do that one or more times, kernel will panic.

fix it by assigning ip_tunnel_dellink to vti_link_ops' dellink, in
which we skip the unregister of fb tunnel device. do the same on ip6_vti.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23 21:11:17 -05:00
Ian Morris
e5d08d718a ipv6: coding style improvements (remove assignment in if statements)
This change has no functional impact and simply addresses some coding
style issues detected by checkpatch. Specifically this change
adjusts "if" statements which also include the assignment of a
variable.

No changes to the resultant object files result as determined by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23 21:00:56 -05:00
Steffen Klassert
fbe68ee875 vti6: Add a lookup method for tunnels with wildcard endpoints.
Currently we can't lookup tunnels with wildcard endpoints.
This patch adds a method to lookup these tunnels in the
receive path.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-11-20 10:03:07 +01:00
David S. Miller
4e84b496fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-11-06 22:01:18 -05:00
Steffen Klassert
d50051407f ipv6: Allow sending packets through tunnels with wildcard endpoints
Currently we need the IP6_TNL_F_CAP_XMIT capabiltiy to transmit
packets through an ipv6 tunnel. This capability is set when the
tunnel gets configured, based on the tunnel endpoint addresses.

On tunnels with wildcard tunnel endpoints, we need to do the
capabiltiy checking on a per packet basis like it is done in
the receive path.

This patch extends ip6_tnl_xmit_ctl() to take local and remote
addresses as parameters to allow for per packet capabiltiy
checking.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 14:19:19 -05:00
Steffen Klassert
16a0231bf7 vti6: Use vti6_dev_init as the ndo_init function.
vti6_dev_init() sets the dev->iflink via a call to
vti6_link_config(). After that, register_netdevice()
sets dev->iflink = -1. So we loose the iflink configuration
for vti6 tunnels. Fix this by using vti6_dev_init() as the
ndo_init function. Then vti6_dev_init() is called after
dev->iflink is set to -1 from register_netdevice().

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03 15:42:24 -05:00