Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also inconsistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.
Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().
Fixes: 51ebd31815 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes: f70ea018da ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
ixgbe_dbg_reg_ops_read and ixgbe_dbg_netdev_ops_read copy-pasting
the same code except for ixgbe_dbg_netdev_ops_buf/ixgbe_dbg_reg_ops_buf,
so introduce a helper ixgbe_dbg_common_ops_read to remove redundant code.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Extend the RTNL lock in ixgbevf_reset_subtask() to protect the state bits
check in addition to the call to ixgbevf_reinit_locked().
This is to make sure that we get the most up-to-date values for the bits
and avoid a possible race when going down.
Suggested-by: Zhiping du <zhipingdu@tencent.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also incosistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.
Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().
Fixes: 51ebd31815 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes: f70ea018da ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of the VF driver it is supposed to provide a context descriptor
that allows us to provide information about the header offsets inside of
the frame. However in the case of XDP we don't really have any of that
information since the data is minimally processed. As a result we were
seeing malicious driver detection (MDD) events being triggered when the PF
had that functionality enabled.
To address this I have added a bit of new code that will "prime" the XDP
ring by providing one context descriptor that assumes the minimal setup of
an Ethernet frame which is an L2 header length of 14. With just that we can
provide enough information to make the hardware happy so that we don't
trigger MDD events.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Move 10ms sleep out of function resetting TX queue.
Reset all the TX queues in one turn and
wait for all of them just once.
Use usleep_range() instead of mdelay() in order not to
affect transmission on other interfaces.
Signed-off-by: Sergey Nemov <sergey.nemov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Issuing "ip link set up/down" can block TSICR interrupts, what results in
missing PTP Tx timestamp and no PPS pulse generation.
Problem happens when the link is set up with the TSICR interrupts pending.
ICR is cleared before enabling interrupts, while TSICR is not. When all TSICR
interrupts are pending at this moment, time_sync interrupt will never
be generated. TSICR should be cleared as well.
In order to reproduce the issue:
1. Setup linux with IEEE 1588 grandmaster and PPS output enabled
2. Continue setting link up/down with random intervals between commands
3. Wait until PPS is not generated ( only one pulse is generated and PPS
dies), and ptp4l complains constantly about Tx timeout.
Signed-off-by: Joanna Yurdal <jyu@trackman.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Updated the e1000.txt kernel documentation with the latest information.
Also convert the text file to reStructuredText (RST) format, since the
Linux kernel documentation now uses this format for documentation.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Over the years, several of the links have changed or are no longer valid
so update them. In addition, the default values were incorrect for a
couple of parameters.
Converted the text file to the reStructuredText (RST) format, since the
Linux kernel documentation now uses this format for documentation.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
There have been multiple reports of crashes that look like
kernel: RIP: 0010:[<ffffffff8110303f>] timecounter_read+0xf/0x50
[...]
kernel: Call Trace:
kernel: [<ffffffffa0806b0f>] e1000e_phc_gettime+0x2f/0x60 [e1000e]
kernel: [<ffffffffa0806c5d>] e1000e_systim_overflow_work+0x1d/0x80 [e1000e]
kernel: [<ffffffff810992c5>] process_one_work+0x155/0x440
kernel: [<ffffffff81099e16>] worker_thread+0x116/0x4b0
kernel: [<ffffffff8109f422>] kthread+0xd2/0xf0
kernel: [<ffffffff8163184f>] ret_from_fork+0x3f/0x70
These can be traced back to the fact that e1000e_systim_reset() skips the
timecounter_init() call if e1000e_get_base_timinca() returns -EINVAL, which
leads to a null deref in timecounter_read().
Commit 83129b37ef ("e1000e: fix systim issues", v4.2-rc1) reworked
e1000e_get_base_timinca() in such a way that it can return -EINVAL for
e1000_pch_spt if the SYSCFI bit is not set in TSYNCRXCTL.
Some experimentation has shown that on I219 (e1000_pch_spt, "MAC: 12")
adapters, the E1000_TSYNCRXCTL_SYSCFI flag is unstable; TSYNCRXCTL reads
sometimes don't have the SYSCFI bit set. Retrying the read shortly after
finds the bit to be set. This was observed at boot (probe) but also link up
and link down.
Moreover, the phc (PTP Hardware Clock) seems to operate normally even after
reads where SYSCFI=0. Therefore, remove this register read and
unconditionally set the clock parameters.
Reported-by: Achim Mildenberger <admin@fph.physik.uni-karlsruhe.de>
Message-Id: <20180425065243.g5mqewg5irkwgwgv@f2>
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1075876
Fixes: 83129b37ef ("e1000e: fix systim issues")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fixes: db9d7d36ee ("net: mvpp2: Split the PPv2 driver to a dedicated directory")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function aq_fw2x_get_mac_permanent is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'aq_fw2x_get_mac_permanent' was not declared. Should it
be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the right device to determine if redirect should be sent especially
when using vrf. Same as well as when sending the redirect.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the clang warning of extraneous parentheses, with the
following coccinelle script.
@@
identifier i;
expression e;
statement s;
@@
if (
-(i == e)
+i == e
)
s
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for Flexible PPS output (which is equivalent
to per_out output of PTP subsystem).
Tested using an oscilloscope and the following commands:
1) Start PTP4L:
# ptp4l -A -4 -H -m -i eth0 &
2) Set Flexible PPS frequency:
# echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period
Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp
of eth0.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudarsana Reddy Kalluru says:
====================
qed: Fix issues in UFP feature commit 'cac6f691'.
This patch series fixes couple of issues in the UFP feature commit,
cac6f691: Add support for Unified Fabric Port.
Changes from previous version:
------------------------------
v2: Added "Fixes:" tag.
Please consider applying it to "net-next".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Incorrect shared memory address is used while deriving the values
for tc and pri_type. Use shmem address corresponding to 'oem_cfg_func'
where the management firmare saves tc/pri_type values.
Fixes: cac6f691 ("qed: Add support for Unified Fabric Port")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The structure shared between driver and management firmware (MFW)
differ in sizes. The additional field defined by the MFW is not
relevant to the current driver. Add a dummy field to the structure.
Fixes: cac6f691 ("qed: Add support for Unified Fabric Port")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
selftests: forwarding: mirror_vlan: Fixlets
This patchset includes two small fixes for the tests that were
introduced in commit 1bb58d2d3c ("Merge branch
'Mirroring-tests-involving-VLAN'").
In patch #1, a "tc action trap" is uninstalled after the suite runs,
instead of being installed again.
In patch #2, a test in suite is renamed to differentiate it from another
test of the same name.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The test description is displayed with the PASS/FAIL resolution after
the test is ran. There however already is one other test described
exactly like this, which makes it unclear which of the tests passed or
failed. Make the description unique.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of installing a trap before tests run and uninstalling it after
they run, mirror_vlan.sh installs it twice due to a typo. Fix the typo.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn says:
====================
selftests/net: various
A few odds and ends to network tests:
- msg_zerocopy: run as part of kselftest
- udp gso: add missing bounds test for minimal sizes
- psocket_snd: initial basic conformance test
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add regression tests for PF_PACKET transmission using packet_snd.
The TPACKET ring interface has tests for transmission and reception.
This is an initial stab at the same for the send call based interface.
Packets are sent over loopback, then read twice. The entire packet is
read from another packet socket and compared. The packet is also
verified to arrive at a UDP socket for protocol conformance.
The test sends a packet over loopback, testing the following options
(not the full cross-product):
- SOCK_DGRAM
- SOCK_RAW
- vlan tag
- qdisc bypass
- bind() and sendto()
- virtio_net_hdr
- csum offload (NOT actual csum feature, ignored on loopback)
- gso
Besides these basic functionality tests, the test runs from a set
of bounds checks, positive and negative. Running over loopback, which
has dev->min_header_len, it cannot generate variable length hhlen.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify that udpgso can generate segments smaller than device mtu, down
to the extreme case of 1B gso_size.
Verify that irrespective of gso_size, udpgso restricts the number of
segments it will generate per call (UDP_MAX_SEGMENTS).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing msg_zerocopy test takes additional protocol arguments.
Add a variant that takes no arguments and runs all supported variants.
Call this from kselftest.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the common free functions while return successfully.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hopefully the last pull request to 4.18 before the merge window.
Nothing major here, we have smaller new features and of course a lots
of fixes.
Major changes:
ath10k
* add memory dump support for QCA9888 and QCA99X0
* add support to configure channel dwell time
* support new DFS host confirmation feature in the firmware
ath
* update various regulatory mappings
wcn36xx
* various fixes to improve reliability
* add Factory Test Mode support
brmfmac
* add debugfs file for reading firmware capabilities
mwifiex
* support sysfs initiated device coredump
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbD/3rAAoJEG4XJFUm622b1ZwH/1xe1IqcwJXzfoDsYPlXVnSh
TiLExjKkD0ty5M0//844FxpxE1sSYJKOJ11uz/COzyG2qi4+5lgpUdjnDoINuKfH
ycqrXGssW7ogPWkVvnxKtlEYvkHNRYLQtxvd26umT77C69jVJLD0x9uihhh2En/C
EKs+OK1Pp0SRvTfB4AblWzoAnpEe1wHJFFh4i3F5H0lMGxLQz/YjFl5aeAjjR406
0vSKLGy2wKIydp8Pe4cAqBEeUWDJurn8ufkk7bmAET5zaXTH1qgZzLH3OWtx/ksz
mcPQq9/ctv35G2917t3Sn69SIUCDGfYkP5DiZV+ti0Hz2gIV0zOg7mGYCU8uHaU=
=11X5
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2018-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.18
Hopefully the last pull request to 4.18 before the merge window.
Nothing major here, we have smaller new features and of course a lots
of fixes.
Major changes:
ath10k
* add memory dump support for QCA9888 and QCA99X0
* add support to configure channel dwell time
* support new DFS host confirmation feature in the firmware
ath
* update various regulatory mappings
wcn36xx
* various fixes to improve reliability
* add Factory Test Mode support
brmfmac
* add debugfs file for reading firmware capabilities
mwifiex
* support sysfs initiated device coredump
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1383cb8103 ("mlx4_core: allocate ICM memory in page size chunks")
brought two regressions caught in our regression suite.
The big one is an additional cost of 256 bytes of overhead per 4096 bytes,
or 6.25 % which is unacceptable since ICM can be pretty large.
This comes from having to allocate one struct mlx4_icm_chunk (256 bytes)
per MLX4_TABLE_CHUNK, which the buggy commit shrank to 4KB
(instead of prior 256KB)
Note that mlx4_alloc_icm() is already able to try high order allocations
and fallback to low-order allocations under high memory pressure.
Most of these allocations happen right after boot time, when we get
plenty of non fragmented memory, there is really no point being so
pessimistic and break huge pages into order-0 ones just for fun.
We only have to tweak gfp_mask a bit, to help falling back faster,
without risking OOM killings.
Second regression is an KASAN fault, that will need further investigations.
Fixes: 1383cb8103 ("mlx4_core: allocate ICM memory in page size chunks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Cc: John Sperbeck <jsperbeck@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Cc: Qing Huang <qing.huang@oracle.com>
Cc: Daniel Jurgens <danielj@mellanox.com>
Cc: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
axienet_open no longer return -ENODEV when PHY cannot be connected to
since commit d7cc3163e0 ("net: axienet: Support phy-less mode of operation")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If statement has make sure the 'slave->phy' is NULL
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return error code -EINVAL instead of 0 if optlen is invalid.
Fixes: 01d2f7e2cd ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
drivers/net/ethernet/mellanox/mlx5/core/fpga/tls.c:199:6: warning:
symbol 'mlx5_fpga_tls_send_teardown_cmd' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the failover register fail
error handling case instead of 0, as done elsewhere in this function.
Fixes: 1ff78076d8 ("netvsc: refactor notifier/event handling code to use the failover framework")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
We can bail out immediately also in case of PHY_IGNORE_INTERRUPT because
phy_mac_interupt() informs us once the link is up.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next tree:
1) Get rid of nf_sk_is_transparent(), use inet_sk_transparent() instead.
From Máté Eckl.
2) Move shared tproxy infrastructure to nf_tproxy_ipv4 and nf_tproxy_ipv6.
Also from Máté.
3) Add hashtable to speed up chain lookups by name, from Florian Westphal.
4) Patch series to add connlimit support reusing part of the
nf_conncount infrastructure. This includes preparation changes such
passing context to the object and expression destroy interface;
garbage collection for expressions embedded into set elements, and
the introduction of the clone_destroy interface for expressions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Infinite loop in _decode_session6(), from Eric Dumazet.
2) Pass correct argument to nla_strlcpy() in netfilter, also from Eric
Dumazet.
3) Out of bounds memory access in ipv6 srh code, from Mathieu Xhonneux.
4) NULL deref in XDP_REDIRECT handling of tun driver, from Toshiaki
Makita.
5) Incorrect idr release in cls_flower, from Paul Blakey.
6) Probe error handling fix in davinci_emac, from Dan Carpenter.
7) Memory leak in XPS configuration, from Alexander Duyck.
8) Use after free with cloned sockets in kcm, from Kirill Tkhai.
9) MTU handling fixes fo ip_tunnel and ip6_tunnel, from Nicolas
Dichtel.
10) Fix UAPI hole in bpf data structure for 32-bit compat applications,
from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
bpf: fix uapi hole for 32 bit compat applications
net: usb: cdc_mbim: add flag FLAG_SEND_ZLP
ip6_tunnel: remove magic mtu value 0xFFF8
ip_tunnel: restore binding to ifaces with a large mtu
net: dsa: b53: Add BCM5389 support
kcm: Fix use-after-free caused by clonned sockets
net-sysfs: Fix memory leak in XPS configuration
ixgbe: fix parsing of TC actions for HW offload
net: ethernet: davinci_emac: fix error handling in probe()
net/ncsi: Fix array size in dumpit handler
cls_flower: Fix incorrect idr release when failing to modify rule
net/sonic: Use dma_mapping_error()
xfrm Fix potential error pointer dereference in xfrm_bundle_create.
vhost_net: flush batched heads before trying to busy polling
tun: Fix NULL pointer dereference in XDP redirect
be2net: Fix error detection logic for BE3
net: qmi_wwan: Add Netgear Aircard 779S
mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG
atm: zatm: fix memcmp casting
iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUs
...
If there is a significant amount of chains list search is too slow, so
add an rhlist table for this.
This speeds up ruleset loading: for every new rule we have to check if
the name already exists in current generation.
We need to be able to cope with duplicate chain names in case a transaction
drops the nfnl mutex (for request_module) and the abort of this old
transaction is still pending.
The list is kept -- we need a way to iterate chains even if hash resize is
in progress without missing an entry.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This features which allows you to limit the maximum number of
connections per arbitrary key. The connlimit expression is stateful,
therefore it can be used from meters to dynamically populate a set, this
provides a mapping to the iptables' connlimit match. This patch also
comes that allows you define static connlimit policies.
This extension depends on the nf_conncount infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eve of merge window fix: The original code was so bogus as to be
casting the wrong generic device to an rport and proceeding to take
actions based on the bogus values it found. Fortunately it seems the
location that is dereferenced always exists, so the code hasn't oopsed
yet, but it certainly annoys the memory checkers.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWxMJDSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWkTAP0QPfpP
ywyhrODRRPNg73zZnF3qo3CSeswSxDdjyW/4JAD/aLgTfPOydD+EA/sr/hjcs+Z/
DU3lt68c+CVp1kRtZ9A=
=9sLD
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Eve of merge window fix: The original code was so bogus as to be
casting the wrong generic device to an rport and proceeding to take
actions based on the bogus values it found.
Fortunately it seems the location that is dereferenced always exists,
so the code hasn't oopsed yet, but it certainly annoys the memory
checkers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_srp: Fix shost to rport translation
-----BEGIN PGP SIGNATURE-----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=MK3/
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.17-rc8' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A few final fixes:
i915:
- fix for potential Spectre vector in the new query uAPI
- fix NULL pointer deref (FDO #106559)
- DMI fix to hide LVDS for Radiant P845 (FDO #105468)
amdgpu:
- suspend/resume DC regression fix
- underscan flicker fix on fiji
- gamma setting fix after dpms
omap:
- fix oops regression
core:
- fix PSR timing
dw-hdmi:
- fix oops regression"
* tag 'drm-fixes-for-v4.17-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/amd/display: Update color props when modeset is required
drm/amd/display: Make atomic-check validate underscan changes
drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense
drm/amd/display: Fix BUG_ON during CRTC atomic check update
drm/i915/query: nospec expects no more than an unsigned long
drm/i915/query: Protect tainted function pointer lookup
drm/i915/lvds: Move acpi lid notification registration to registration phase
drm/i915: Disable LVDS on Radiant P845
drm/omap: fix NULL deref crash with SDI displays
drm/psr: Fix missed entry in PSR setup time table.
Before this patch, cloned expressions are released via ->destroy. This
is a problem for the new connlimit expression since the ->destroy path
drop a reference on the conntrack modules and it unregisters hooks. The
new ->destroy_clone provides context that this expression is being
released from the packet path, so it is mirroring ->clone(), where
neither module reference is dropped nor hooks need to be unregistered -
because this done from the control plane path from the ->init() path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use garbage collector to schedule removal of elements based of feedback
from expression that this element comes with. Therefore, the garbage
collector is not guided by timeout expirations in this new mode.
The new connlimit expression sets on the NFT_EXPR_GC flag to enable this
behaviour, the dynset expression needs to explicitly enable the garbage
collector via set->ops->gc_init call.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_set_elem_destroy() can be called from call_rcu context. Annotate
netns and table in set object so we can populate the context object.
Moreover, pass context object to nf_tables_set_elem_destroy() from the
commit phase, since it is already available from there.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch provides an interface to maintain the list of connections and
the lookup function to obtain the number of connections in the list.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
