In case we hit the error case for a metadata buffer in
end_bio_extent_readpage then 'ret' won't really be checked before it's
written again to. This means the -EIO in this case will never be
checked, just remove it.
Fixes-coverity-id: 1442513
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently extent_readpages (called from btrfs_readpages) will always
call __extent_readpages which tries to create contiguous range of pages
and call __do_contiguous_readpages when such contiguous range is
created.
It turns out this is unnecessary due to the fact that generic MM code
always calls filesystem's ->readpages callback (btrfs_readpages in
this case) with already contiguous pages. Armed with this knowledge it's
possible to simplify extent_readpages by eliminating the call to
__extent_readpages and directly calling contiguous_readpages.
The only edge case that needs to be handled is when
add_to_page_cache_lru fails. This is easy as all that is needed is to
submit whatever is the number of pages successfully added to the lru.
This can happen when the page is already in the range, so it does not
need to be read again, and we can't do anything else in case of other
errors.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member is tracking simple status of the lock, we can use bool for
that and make some room for further space reduction in the structure.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::write_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The write_locks are a simple counter to track locking balance and used
to assert tree locks. Add helpers to make it conditionally work only in
DEBUG builds. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::read_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The read_locks are a simple counter to track locking balance and used to
assert tree locks. Add helpers to make it conditionally work only in
DEBUG builds. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_readers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add helpers for conditional DEBUG build to assert that the extent buffer
spinning_readers constraints are met. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_writers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add helpers for conditional DEBUG build to assert that the extent buffer
spinning_writers constraints are met. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag just became synonymous to EXTENT_LOCKED, so just remove it and
used EXTENT_LOCKED directly. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag was introduced in a52d9a8033 ("Btrfs: Extent based page
cache code.") and subsequently it's usage effectively was removed by
1edbb734b4 ("Btrfs: reduce CPU usage in the extent_state tree") and
f2a97a9dbd ("btrfs: remove all unused functions"). Just remove it,
no functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When building with -Wsometimes-uninitialized, Clang warns:
fs/btrfs/uuid-tree.c:129:13: warning: variable 'eb' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
fs/btrfs/uuid-tree.c:129:13: warning: variable 'offset' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Clang can't tell that all cases are covered with this final else if.
Just turn it into an else so that it is clear.
Link: https://github.com/ClangBuiltLinux/linux/issues/385
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() takes transaction pointer as the first argument,
however in ioctl.c for the purpose of setting the compression property,
we call btrfs_set_prop() with NULL transaction pointer. Down in
the call chain btrfs_setxattr() starts transaction to update the
attribute and also to update the inode.
So for clarity, create btrfs_set_prop_trans() with no transaction
pointer as argument, in preparation to start transaction here instead of
doing it down the call chain at btrfs_setxattr().
Also now the btrfs_set_prop() is a static function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info is commonly used to represent struct fs_info *, rename
to fs_private to avoid confusion.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop forward declaration of the functions:
- prop_compression_validate
- prop_compression_apply
- prop_compression_extract
No functional changes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() is a redirect to __btrfs_set_prop() with the
transaction handle equal to NULL. __btrfs_set_prop() in turn passes
this to do_setxattr() which then transaction is actually created.
Instead merge __btrfs_set_prop() to btrfs_set_prop(), and update the
caller with NULL argument.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit c40a3d38af ("Btrfs: Compute and look up csums based on
sectorsized blocks") we do a kmap_atomic() on the contents of a bvec.
The code before c40a3d38af had the kmap region just around the
checksumming too.
kmap_atomic() in turn does a preempt_disable() and pagefault_disable(),
so we shouldn't map the data for too long. Reduce the time the bvec's
page is mapped to when we actually need it.
Performance wise it doesn't seem to make a huge difference with a 2 vcpu VM
on a /dev/zram device:
vanilla patched delta
write 17.4MiB/s 17.8MiB/s +0.4MiB/s (+2%)
read 40.6MiB/s 41.5MiB/s +0.9MiB/s (+2%)
The following fio job profile was used in the comparision:
[global]
ioengine=libaio
direct=1
sync=1
norandommap
time_based
runtime=10m
size=100m
group_reporting
numjobs=2
[test]
filename=/mnt/test/fio
rw=randrw
rwmixread=70
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although btrfs heavily relies on extent_io_tree, we don't really have
any good trace events for them.
This patch will add the folowing trace events:
- trace_btrfs_set_extent_bit()
- trace_btrfs_clear_extent_bit()
- trace_btrfs_convert_extent_bit()
Since selftests could create temporary extent_io_tree without fs_info,
modify TP_fast_assign_fsid() to accept NULL as fs_info. NULL fs_info
will lead to all zero fsid.
The output would be:
btrfs_set_extent_bit: <FDID>: io_tree=INODE_IO ino=1 root=1 start=22036480 len=4096 set_bits=LOCKED
btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22040576 len=4096 set_bits=LOCKED
btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22044672 len=4096 set_bits=LOCKED
btrfs_set_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22048768 len=4096 set_bits=LOCKED
btrfs_clear_extent_bit: <FSID>: io_tree=INODE_IO ino=1 root=1 start=22036480 len=16384 clear_bits=LOCKED
^^^ Extent buffer 22036480 read from disk, the locking progress
btrfs_set_extent_bit: <FSID>: io_tree=TRANS_DIRTY_PAGES ino=1 root=1 start=30425088 len=16384 set_bits=DIRTY
btrfs_set_extent_bit: <FSID>: io_tree=TRANS_DIRTY_PAGES ino=1 root=1 start=30441472 len=16384 set_bits=DIRTY
^^^ 2 new tree blocks allocated in one transaction
btrfs_set_extent_bit: <FSID>: io_tree=FREED_EXTENTS0 ino=0 root=0 start=30523392 len=16384 set_bits=DIRTY
btrfs_set_extent_bit: <FSID>: io_tree=FREED_EXTENTS0 ino=0 root=0 start=30556160 len=16384 set_bits=DIRTY
^^^ 2 old tree blocks get pinned down
There is one point which need attention:
1) Those trace events can be pretty heavy:
The following workload would generate over 400 trace events.
mkfs.btrfs -f $dev
start_trace
mount $dev $mnt -o enospc_debug
sync
touch $mnt/file1
touch $mnt/file2
touch $mnt/file3
xfs_io -f -c "pwrite 0 16k" $mnt/file4
umount $mnt
end_trace
It's not recommended to use them in real world environment.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename enums ]
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs has the following different extent_io_trees used:
- fs_info::free_extents[2]
- btrfs_inode::io_tree - for both normal inodes and the btree inode
- btrfs_inode::io_failure_tree
- btrfs_transaction::dirty_pages
- btrfs_root::dirty_log_pages
If we want to trace changes in those trees, it will be pretty hard to
distinguish them.
Instead of using hard-to-read pointer address, this patch will introduce
a new member extent_io_tree::owner to track the owner.
This modification needs all the callers of extent_io_tree_init() to
accept a new parameter @owner.
This patch provides the basis for later trace events.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch is split from the following one "btrfs: Introduce
extent_io_tree::owner to distinguish different io_trees" from Qu, so the
different changes are not mixed together.
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will add a new member fs_info to extent_io_tree.
This provides the basis for later trace events to distinguish the output
between different btrfs filesystems. While this increases the size of
the structure, we want to know the source of the trace events and
passing the fs_info as an argument to all contexts is not possible.
The selftests are now allowed to set it to NULL as they don't use the
tracepoints.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit db2462a6ad ("btrfs: don't run delayed refs in the end transaction
logic") removed its last use, so now it does absolutely nothing, therefore
remove it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While calling functions inside zstd, we don't need to use the
indirection provided by the workspace_manager. Forward declarations are
added to maintain the function order of btrfs_compress_op.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The error code used here is wrong as it's not invalid to try to start
scrub when umount has begun. Returning EAGAIN is more user friendly as
it's recoverable.
Signed-off-by: David Sterba <dsterba@suse.com>
inode->i_op is initialized multiple times. Perform it once. This was
left by 4779cc0424 ("Btrfs: get rid of btrfs_symlink_aops").
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we failed to find a root key in btrfs_update_root(), we just panic.
That's definitely not cool, fix it by outputting an unique error
message, aborting current transaction and return -EUCLEAN. This should
not normally happen as the root has been used by the callers in some
way.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit d2e174d5d3 ("btrfs: document extent mapping assumptions in
checksum") we have a comment in place why map_private_extent_buffer()
can't return 1 in the csum_tree_block() case.
Make this a bit more explicit and WARN_ON() in case this this assumption
breaks.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently csum_tree_block() does two things, first it as it's name
suggests it calculates the checksum for a tree-block. But it also writes
this checksum to disk or reads an extent_buffer from disk and compares the
checksum with the calculated checksum, depending on the verify argument.
Furthermore one of the two callers passes in '1' for the verify argument,
the other one passes in '0'.
For clarity and less layering violations, factor out the second stage in
csum_tree_block()'s callers.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=efvr
-----END PGP SIGNATURE-----
Merge tag 'for-5.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One patch to fix a crash in io submission path, due to memory
allocation errors.
In short, the multipage bio work that landed in 5.1 caused larger bios
that in turn require larger temporary memory for checksums. The patch
is a workaround, we're going to rework the allocation so it does not
require the vmalloc fallback.
It took a while to identify that it's caused by patches in 5.1 and not
a patchset that did some changes in error handling in the code. I've
tested it on various memory/cpu combinations, it could hit OOM but
does not crash.
The timestamp of the patch is less than a day due to updates in the
changelog, tests were running meanwhile"
* tag 'for-5.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Switch memory allocations in async csum calculation path to kvmalloc
Recent multi-page biovec rework allowed creation of bios that can span
large regions - up to 128 megabytes in the case of btrfs. OTOH btrfs'
submission path currently allocates a contiguous array to store the
checksums for every bio submitted. This means we can request up to
(128mb / BTRFS_SECTOR_SIZE) * 4 bytes + 32bytes of memory from kmalloc.
On busy systems with possibly fragmented memory said kmalloc can fail
which will trigger BUG_ON due to improper error handling IO submission
context in btrfs.
Until error handling is improved or bios in btrfs limited to a more
manageable size (e.g. 1m) let's use kvmalloc to fallback to vmalloc for
such large allocations. There is no hard requirement that the memory
allocated for checksums during IO submission has to be contiguous, but
this is a simple fix that does not require several non-contiguous
allocations.
For small writes this is unlikely to have any visible effect since
kmalloc will still satisfy allocation requests as usual. For larger
requests the code will just fallback to vmalloc.
We've performed evaluation on several workload types and there was no
significant difference kmalloc vs kvmalloc.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=fYo9
-----END PGP SIGNATURE-----
Merge tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix parsing of compression algorithm when set as a inode property,
this could end up with eg. 'zst' or 'zli' in the value
- don't allow trim on a filesystem with unreplayed log, this could
cause data loss if there are pending updates to the block groups that
would not be subject to trim after replay
* tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prop: fix vanished compression property after failed set
btrfs: prop: fix zstd compression parameter validation
Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
The compression property resets to NULL, instead of the old value if we
fail to set the new compression parameter.
$ btrfs prop get /btrfs compression
compression=lzo
$ btrfs prop set /btrfs compression zli
ERROR: failed to set compression for /btrfs: Invalid argument
$ btrfs prop get /btrfs compression
This is because the compression property ->validate() is successful for
'zli' as the strncmp() used the length passed from the userspace.
Fix it by using the expected string length in strncmp().
Fixes: 63541927c8 ("Btrfs: add support for inode properties")
Fixes: 5c1aab1dd5 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We let pass zstd compression parameter even if it is not fully valid.
For example:
$ btrfs prop set /btrfs compression zst
$ btrfs prop get /btrfs compression
compression=zst
zlib and lzo are fine.
Fix it by checking the correct prefix length.
Fixes: 5c1aab1dd5 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whan a filesystem is mounted with the nologreplay mount option, which
requires it to be mounted in RO mode as well, we can not allow discard on
free space inside block groups, because log trees refer to extents that
are not pinned in a block group's free space cache (pinning the extents is
precisely the first phase of replaying a log tree).
So do not allow the fitrim ioctl to do anything when the filesystem is
mounted with the nologreplay option, because later it can be mounted RW
without that option, which causes log replay to happen and result in
either a failure to replay the log trees (leading to a mount failure), a
crash or some silent corruption.
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes: 96da09192c ("btrfs: Introduce new mount option to disable tree log replay")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Back in commit a89ca6f24f ("Btrfs: fix fsync after truncate when
no_holes feature is enabled") I added an assertion that is triggered when
an inline extent is found to assert that the length of the (uncompressed)
data the extent represents is the same as the i_size of the inode, since
that is true most of the time I couldn't find or didn't remembered about
any exception at that time. Later on the assertion was expanded twice to
deal with a case of a compressed inline extent representing a range that
matches the sector size followed by an expanding truncate, and another
case where fallocate can update the i_size of the inode without adding
or updating existing extents (if the fallocate range falls entirely within
the first block of the file). These two expansion/fixes of the assertion
were done by commit 7ed586d0a8 ("Btrfs: fix assertion on fsync of
regular file when using no-holes feature") and commit 6399fb5a0b
("Btrfs: fix assertion failure during fsync in no-holes mode").
These however missed the case where an falloc expands the i_size of an
inode to exactly the sector size and inline extent exists, for example:
$ mkfs.btrfs -f -O no-holes /dev/sdc
$ mount /dev/sdc /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar
wrote 1096/1096 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec)
$ xfs_io -c "falloc 1096 3000" /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
Segmentation fault
$ dmesg
[701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727
[701253.602962] ------------[ cut here ]------------
[701253.603224] kernel BUG at fs/btrfs/ctree.h:3533!
[701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G W 5.0.0-rc8-btrfs-next-45 #1
[701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs]
(...)
[701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286
[701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000
[701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868
[701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000
[701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18
[701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80
[701253.607769] FS: 00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000
[701253.608163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0
[701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[701253.609608] Call Trace:
[701253.609994] btrfs_log_inode+0xdfb/0xe40 [btrfs]
[701253.610383] btrfs_log_inode_parent+0x2be/0xa60 [btrfs]
[701253.610770] ? do_raw_spin_unlock+0x49/0xc0
[701253.611150] btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
[701253.611537] btrfs_sync_file+0x3b2/0x440 [btrfs]
[701253.612010] ? do_sysinfo+0xb0/0xf0
[701253.612552] do_fsync+0x38/0x60
[701253.612988] __x64_sys_fsync+0x10/0x20
[701253.613360] do_syscall_64+0x60/0x1b0
[701253.613733] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[701253.614103] RIP: 0033:0x7f14da4e66d0
(...)
[701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
[701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0
[701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003
[701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010
[701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260
[701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10
(...)
[701253.619941] ---[ end trace e088d74f132b6da5 ]---
Updating the assertion again to allow for this particular case would result
in a meaningless assertion, plus there is currently no risk of logging
content that would result in any corruption after a log replay if the size
of the data encoded in an inline extent is greater than the inode's i_size
(which is not currently possibe either with or without compression),
therefore just remove the assertion.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
qgroup_rsv_size is calculated as the product of
outstanding_extent * fs_info->nodesize. The product is calculated with
32 bit precision since both variables are defined as u32. Yet
qgroup_rsv_size expects a 64 bit result.
Avoid possible multiplication overflow by casting outstanding_extent to
u64. Such overflow would in the worst case (64K nodesize) require more
than 65536 extents, which is quite large and i'ts not likely that it
would happen in practice.
Fixes-coverity-id: 1435101
Fixes: ff6bc37eb7 ("btrfs: qgroup: Use independent and accurate per inode qgroup rsv")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If 'cur_level' is 7 then the bound checking at the top of the function
will actually pass. Later on, it's possible to dereference
ds_path->nodes[cur_level+1] which will be an out of bounds.
The correct check will be cur_level >= BTRFS_MAX_LEVEL - 1 .
Fixes-coverty-id: 1440918
Fixes-coverty-id: 1440911
Fixes: ea49f3e73c ("btrfs: qgroup: Introduce function to find all new tree blocks of reloc tree")
CC: stable@vger.kernel.org # 4.20+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Parity page is incorrectly unmapped in finish_parity_scrub(), triggering
a reference counter bug on i386, i.e.:
[ 157.662401] kernel BUG at mm/highmem.c:349!
[ 157.666725] invalid opcode: 0000 [#1] SMP PTI
The reason is that kunmap(p_page) was completely left out, so we never
did an unmap for the p_page and the loop unmapping the rbio page was
iterating over the wrong number of stripes: unmapping should be done
with nr_data instead of rbio->real_stripes.
Test case to reproduce the bug:
- create a raid5 btrfs filesystem:
# mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde
- mount it:
# mount /dev/sdb /mnt
- run btrfs scrub in a loop:
# while :; do btrfs scrub start -BR /mnt; done
BugLink: https://bugs.launchpad.net/bugs/1812845
Fixes: 5a6ac9eacb ("Btrfs, raid56: support parity scrub on raid56")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As readahead is an optimization, all errors are usually filtered out,
but still properly handled when the real read call is done. The commit
5e9d398240 ("btrfs: readpages() should submit IO as read-ahead") added
REQ_RAHEAD to readpages() because that's only used for readahead
(despite what one would expect from the callback name).
This causes a flood of messages and inflated read error stats, so skip
reporting in case it's readahead.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202403
Reported-by: LimeTech <tomm@lime-technology.com>
Fixes: 5e9d398240 ("btrfs: readpages() should submit IO as read-ahead")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
When we are mixing buffered writes with direct IO writes against the same
file and snapshotting is happening concurrently, we can end up with a
corrupt file content in the snapshot. Example:
1) Inode/file is empty.
2) Snapshotting starts.
2) Buffered write at offset 0 length 256Kb. This updates the i_size of the
inode to 256Kb, disk_i_size remains zero. This happens after the task
doing the snapshot flushes all existing delalloc.
3) DIO write at offset 256Kb length 768Kb. Once the ordered extent
completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and
updates the inode item in the fs tree with a size of 1Mb (which is
the value of disk_i_size).
4) The dealloc for the range [0, 256Kb[ did not start yet.
5) The transaction used in the DIO ordered extent completion, which updated
the inode item, is committed by the snapshotting task.
6) Snapshot creation completes.
7) Dealloc for the range [0, 256Kb[ is flushed.
After that when reading the file from the snapshot we always get zeroes for
the range [0, 256Kb[, the file has a size of 1Mb and the data written by
the direct IO write is found. From an application's point of view this is
a corruption, since in the source subvolume it could never read a version
of the file that included the data from the direct IO write without the
data from the buffered write included as well. In the snapshot's tree,
file extent items are missing for the range [0, 256Kb[.
The issue, obviously, does not happen when using the -o flushoncommit
mount option.
Fix this by flushing delalloc for all the roots that are about to be
snapshotted when committing a transaction. This guarantees total ordering
when updating the disk_i_size of an inode since the flush for dealloc is
done when a transaction is in the TRANS_STATE_COMMIT_START state and wait
is done once no more external writers exist. This is similar to what we
do when using the flushoncommit mount option, but we do it only if the
transaction has snapshots to create and only for the roots of the
subvolumes to be snapshotted. The bulk of the dealloc is flushed in the
snapshot creation ioctl, so the flush work we do inside the transaction
is minimized.
This issue, involving buffered and direct IO writes with snapshotting, is
often triggered by fstest btrfs/078, and got reported by fsck when not
using the NO_HOLES features, for example:
$ cat results/btrfs/078.full
(...)
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
*** fsck.btrfs output ***
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
root 258 inode 264 errors 100, file extent discount
Found file extent holes:
start: 524288, len: 65536
ERROR: errors found in fs roots
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When Filipe added the recursive directory logging stuff in
2f2ff0ee5e ("Btrfs: fix metadata inconsistencies after directory
fsync") he specifically didn't take the directory i_mutex for the
children directories that we need to log because of lockdep. This is
generally fine, but can lead to this WARN_ON() tripping if we happen to
run delayed deletion's in between our first search and our second search
of dir_item/dir_indexes for this directory. We expect this to happen,
so the WARN_ON() isn't necessary. Drop the WARN_ON() and add a comment
so we know why this case can happen.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we do a shrinking truncate against an inode which is already present
in the respective log tree and then rename it, as part of logging the new
name we end up logging an inode item that reflects the old size of the
file (the one which we previously logged) and not the new smaller size.
The decision to preserve the size previously logged was added by commit
1a4bcf470c ("Btrfs: fix fsync data loss after adding hard link to
inode") in order to avoid data loss after replaying the log. However that
decision is only needed for the case the logged inode size is smaller then
the current size of the inode, as explained in that commit's change log.
If the current size of the inode is smaller then the previously logged
size, we know a shrinking truncate happened and therefore need to use
that smaller size.
Example to trigger the problem:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 8000" /mnt/foo
$ xfs_io -c "fsync" /mnt/foo
$ xfs_io -c "truncate 3000" /mnt/foo
$ mv /mnt/foo /mnt/bar
$ xfs_io -c "fsync" /mnt/bar
<power failure>
$ mount /dev/sdb /mnt
$ od -t x1 -A d /mnt/bar
0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
*
0008000
Once we rename the file, we log its name (and inode item), and because
the inode was already logged before in the current transaction, we log it
with a size of 8000 bytes because that is the size we previously logged
(with the first fsync). As part of the rename, besides logging the inode,
we do also sync the log, which is done since commit d4682ba03e
("Btrfs: sync log after logging new name"), so the next fsync against our
inode is effectively a no-op, since no new changes happened since the
rename operation. Even if did not sync the log during the rename
operation, the same problem (fize size of 8000 bytes instead of 3000
bytes) would be visible after replaying the log if the log ended up
getting synced to disk through some other means, such as for example by
fsyncing some other modified file. In the example above the fsync after
the rename operation is there just because not every filesystem may
guarantee logging/journalling the inode (and syncing the log/journal)
during the rename operation, for example it is needed for f2fs, but not
for ext4 and xfs.
Fix this scenario by, when logging a new name (which is triggered by
rename and link operations), using the current size of the inode instead
of the previously logged inode size.
A test case for fstests follows soon.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202695
CC: stable@vger.kernel.org # 4.4+
Reported-by: Seulbae Kim <seulbae@gatech.edu>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=u4Kf
-----END PGP SIGNATURE-----
Merge tag 'for-5.1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Correctness and a deadlock fixes"
* tag 'for-5.1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zstd: ensure reclaim timer is properly cleaned up
btrfs: move ulist allocation out of transaction in quota enable
btrfs: save drop_progress if we drop refs at all
btrfs: check for refs on snapshot delete resume
Btrfs: fix deadlock between clone/dedupe and rename
Btrfs: fix corruption reading shared and compressed extents after hole punching
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to
pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This
simplifies the expression in every filesystem. Also rename the macro to
VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused
VM_MIN_READAHEAD
[akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen]
Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=VBaU
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"Not a huge amount of changes in this round, the biggest one is that we
finally have Mings multi-page bvec support merged. Apart from that,
this pull request contains:
- Small series that avoids quiescing the queue for sysfs changes that
match what we currently have (Aleksei)
- Series of bcache fixes (via Coly)
- Series of lightnvm fixes (via Mathias)
- NVMe pull request from Christoph. Nothing major, just SPDX/license
cleanups, RR mp policy (Hannes), and little fixes (Bart,
Chaitanya).
- BFQ series (Paolo)
- Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
for the fast path (Jianchao)
- fops->iopoll() added for async IO polling, this is a feature that
the upcoming io_uring interface will use (Christoph, me)
- Partition scan loop fixes (Dongli)
- mtip32xx conversion from managed resource API (Christoph)
- cdrom registration race fix (Guenter)
- MD pull from Song, two minor fixes.
- Various documentation fixes (Marcos)
- Multi-page bvec feature. This brings a lot of nice improvements
with it, like more efficient splitting, larger IOs can be supported
without growing the bvec table size, and so on. (Ming)
- Various little fixes to core and drivers"
* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
block: fix updating bio's front segment size
block: Replace function name in string with __func__
nbd: propagate genlmsg_reply return code
floppy: remove set but not used variable 'q'
null_blk: fix checking for REQ_FUA
block: fix NULL pointer dereference in register_disk
fs: fix guard_bio_eod to check for real EOD errors
blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
block: optimize bvec iteration in bvec_iter_advance
block: introduce mp_bvec_for_each_page() for iterating over page
block: optimize blk_bio_segment_split for single-page bvec
block: optimize __blk_segment_map_sg() for single-page bvec
block: introduce bvec_nth_page()
iomap: wire up the iopoll method
block: add bio_set_polled() helper
block: wire up block device iopoll method
fs: add an iopoll method to struct file_operations
loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
loop: do not print warn message if partition scan is successful
block: bounce: make sure that bvec table is updated
...
Merge more updates from Andrew Morton:
- some of the rest of MM
- various misc things
- dynamic-debug updates
- checkpatch
- some epoll speedups
- autofs
- rapidio
- lib/, lib/lzo/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
samples/mic/mpssd/mpssd.h: remove duplicate header
kernel/fork.c: remove duplicated include
include/linux/relay.h: fix percpu annotation in struct rchan
arch/nios2/mm/fault.c: remove duplicate include
unicore32: stop printing the virtual memory layout
MAINTAINERS: fix GTA02 entry and mark as orphan
mm: create the new vm_fault_t type
arm, s390, unicore32: remove oneliner wrappers for memblock_alloc()
arch: simplify several early memory allocations
openrisc: simplify pte_alloc_one_kernel()
sh: prefer memblock APIs returning virtual address
microblaze: prefer memblock API returning virtual address
powerpc: prefer memblock APIs returning virtual address
lib/lzo: separate lzo-rle from lzo
lib/lzo: implement run-length encoding
lib/lzo: fast 8-byte copy on arm64
lib/lzo: 64-bit CTZ on arm64
lib/lzo: tidy-up ifdefs
ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size
ipc: annotate implicit fall through
...
First, the btrfs_debug macros open-code (one possible definition of)
DYNAMIC_DEBUG_BRANCH, so they don't benefit from the CONFIG_JUMP_LABEL
optimization.
Second, a planned change of struct _ddebug (to reduce its size on 64 bit
machines) requires that all descriptors in a translation unit use
distinct identifiers.
Using the new _dynamic_func_call_no_desc helper macro from
dynamic_debug.h takes care of both of these. No functional change.
Link: http://lkml.kernel.org/r/20190212214150.4807-12-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
