The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the TI OMAP HSMMC and fixed regulator support
for keystone platforms.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
DMA for (H)SCIF(A|B) serial ports on Renesas R-Car Gen2 and RZ/G1 SoCs
is considered stable, hence enable it by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The manual bridge implementation was removed in favor of the generic
one, so now we need to enable standard bridge drivers like
DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511.
Both were already enabled, but the (newer) ADV7511 audio part wasn't.
Fixes: 5c602531fe ("drm: rcar-du: Replace manual bridge implementation with DRM bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
- Several options were moved,
- INPUT_MOUSEDEV_PSAUX is no longer enabled by default since commit
73d8ef7600 ("Input: mousedev - stop offering PS/2 to userspace
by default").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
DMA for (H)SCIF(A|B) serial ports on R-Car Gen2 and RZ/G1 SoCs is
considered stable, hence enable it by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The manual bridge implementation was removed in favor of the generic
one, so now we need to enable standard bridge drivers like
DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511.
DRM_I2C_ADV7511 was already enabled, but the (newer) audio part wasn't.
Fixes: 5c602531fe ("drm: rcar-du: Replace manual bridge implementation with DRM bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
USB_XHCI_RCAR is no longer enabled, as it now has a dependency on
USB_XHCI_PLATFORM, instead of selecting USB_XHCI_PLATFORM.
As the latter selects the former if ARCH_RENESAS, fix this by replacing
USB_XHCI_RCAR by USB_XHCI_PLATFORM in shmobile_defconfig.
Fixes: f879fc32aa ("usb: host: xhci-rcar: Avoid long wait in xhci_reset()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
PCIE_RCAR is no longer enabled, as it now has a dependency on
PCI_MSI_IRQ_DOMAIN instead of selecting PCI_MSI and PCI_MSI_IRQ_DOMAIN.
Fix this by explicitly enabling PCIE_RCAR in shmobile_defconfig.
Fixes: 3ee803641e ("PCI/MSI: irqchip: Fix PCI_MSI dependencies")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel KSZ9031MNX).
Gigabit Ethernet support is available in Renesas AVB driver.
To increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable i.MX v4l2 media staging driver. For video capture on i.MX, the
video multiplexer subdev is required. On the SabreAuto, the ADV7180
video decoder is required along with i2c-mux-gpio. The Sabrelite
and SabreSD require the OV5640 and the SabreLite requires PWM clocks
for the OV5640.
Increase max zoneorder to allow larger video buffer allocations.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
AXP20X_POWER depends on IIO. Even though it does not depend on AXP20X_ADC,
it is the new, preferred way of getting power supply configuration, it's
going to be enabled anyway.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A bunch of new power supplies have been added recently to handle the
batteries and the AC-IN plugs. Add them to our defconfig.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Update the defconfig with the current state of defaults.
This was done using make sunxi_defconfig; make savedefconfig
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the TI SYSCON and TI-SCI reset drivers for Keystone
platforms. These drivers will provide the reset functionality
for devices like DSPs or PRU-ICSSs. There are no devices that
require these to be built-in, so these are enabled as modules.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable the TI-SCI core protocol and the corresponding genpd
driver to enable the essential infrastructure for various
device drivers on the 66AK2G family of SoCs. The TI-SCI Clock
driver is automatically enabled for ARCH_KEYSTONE.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Message Manager is a communication hardware block on 66AK2G[1] SoCs.
Enable the same to provide support for communication with 66AK2G Power
Management Micro Controller (PMMC) via the TISCI protocol[2].
[1] http://www.ti.com/product/66ak2g02
[2] http://processors.wiki.ti.com/index.php/TISCI
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
This enables the wifi driver for Raspberry Pi Zero W. We need
to build this as a module otherwise the drivers tries to load the
firmware before the root partition is mounted.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
The VC4 needs more memory than the default setting:
cma: cma_alloc: alloc failed, req-size: 4096 pages, ret: -12
vc4-drm soc:gpu: failed to allocate buffer with size 16777216
So increase the value to 32 MB and fix this issue.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Since pl011 is connected to the BT chip, we need to enable the Mini
UART for serial console.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
exynos_defconfig, beside serving as a reference config for Exynos-based
devices, is used by developers during regular development work.
Enabling options responsible for locking tests allows to discover bugs
in drivers and mach code earlier.
This enables:
1. Detection of sleeping in atomic sections (DEBUG_ATOMIC_SLEEP),
2. Full lockdep (DEBUG_LOCK_ALLOC and PROVE_LOCKING which makes other
lock debug entries unneeded),
3. Detection of soft, kernel lockups (SOFTLOCKUP_DETECTOR).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Enable useful, but not essential components:
- NLS_UTF8, it might be used for accessing Microsoft-FS based storages,
- popular crypto algorithms and transformations as modules.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Enable useful, but not essential, stacks and drivers as modules:
- Bluetooth,
- mac80211,
- NFC,
- some USB network adapters,
- USB storage,
- additional USB devices (printers etc).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
CPU_FREQ_DEBUG is gone since commit 2d06d8c49a ("[CPUFREQ] use
dynamic debug instead of custom infrastructure").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Remove options which do not exist anymore:
- ECONET is gone since commit 349f29d841 ("econet: remove ancient bug
ridden protocol");
- IPDDP_DECAP is gone since commit 9b5645b513 ("appletalk: remove
"config IPDDP_DECAP"");
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The coda driver may be probed prior to the rootfs being available, leading
to firmware loading failure.
To avoid such problem, select the coda driver as module.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx7d-sabresd board uses a 74LV595PW SPI expander to drive several
peripherals, such as Ethernet reset, PCI reset, LCD power, etc.
Enabled this option by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some boards like imx7d-sdb provide SPIO functionality via GPIOs,
so enable the CONFIG_SPI_GPIO option.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Core:
- The documentation is moved over to RST.
- We now have agreed bindings for enabling input and output
buffers without actually enabling input and/or output on a
pin. We are chiseling out some details of pin control
electronics.
New drivers:
- ZTE ZX
- Renesas RZA1
- MIPS Ingenic JZ47xx: also switch over existing drivers in the
tree to use this pin controller and consolidate earlier
spread out code.
- Microschip MCP23S08: this driver is migrated from the GPIO
subsystem and totally rewritten to use proper pin control.
All users are switched over.
New subdrivers:
- Renesas R8A7743 and R8A7745.
- Allwinner Sunxi A83T R_PIO.
- Marvell MVEBU Armada CP110 and AP806.
- Intel Cannon Lake PCH.
- Qualcomm IPQ8074.
Notable improvements:
- IRQ support on the Marvell MVEBU Armada 37xx.
- Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
- Rockchip driver now supports iomux-route switching for
RK3228, RK3328 and RK3399.
- Rockchip A10 and A20 are merged into a single driver.
- STM32 has improved GPIO support.
- Samsung Exynos drivers are split per ARMv7 and ARMv8.
- Marvell MVEBU is converted to use regmap for register
access.
Maintenance:
- Several Renesas SH-PFC refactorings and updates.
- Serious code size cut for Mediatek MT7623.
- Misc janitorial and MAINTAINERS fixes.
-----BEGIN PGP SIGNATURE-----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=dUFL
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the big bulk of pin control changes for the v4.13 series:
Core:
- The documentation is moved over to RST.
- We now have agreed bindings for enabling input and output buffers
without actually enabling input and/or output on a pin. We are
chiseling out some details of pin control electronics.
New drivers:
- ZTE ZX
- Renesas RZA1
- MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
to use this pin controller and consolidate earlier spread out code.
- Microschip MCP23S08: this driver is migrated from the GPIO
subsystem and totally rewritten to use proper pin control. All
users are switched over.
New subdrivers:
- Renesas R8A7743 and R8A7745.
- Allwinner Sunxi A83T R_PIO.
- Marvell MVEBU Armada CP110 and AP806.
- Intel Cannon Lake PCH.
- Qualcomm IPQ8074.
Notable improvements:
- IRQ support on the Marvell MVEBU Armada 37xx.
- Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
- Rockchip driver now supports iomux-route switching for RK3228,
RK3328 and RK3399.
- Rockchip A10 and A20 are merged into a single driver.
- STM32 has improved GPIO support.
- Samsung Exynos drivers are split per ARMv7 and ARMv8.
- Marvell MVEBU is converted to use regmap for register access.
Maintenance:
- Several Renesas SH-PFC refactorings and updates.
- Serious code size cut for Mediatek MT7623.
- Misc janitorial and MAINTAINERS fixes"
* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
pinctrl: rza1: Remove unneeded wrong check for wrong variable
pinctrl: qcom: Add ipq8074 pinctrl driver
pinctrl: freescale: imx7d: make of_device_ids const.
pinctrl: DT: extend the pinmux property to support integers array
pinctrl: generic: Add output-enable property
pinctrl: armada-37xx: Fix number of pin in sdio_sb
pinctrl: armada-37xx: Fix uart2 group selection register mask
pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
pinctrl: sh-pfc: r8a7795: Add PWM support
MAINTAINERS: Add Qualcomm pinctrl drivers section
arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
dt-bindings: pinctrl: Add RZ/A1 bindings doc
pinctrl: Renesas RZ/A1 pin and gpio controller
pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
pinctrl.txt: move it to the driver-api book
pinctrl: ingenic: checking for NULL instead of IS_ERR()
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
...
A wide variety of TI platforms support NAND via the
CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this.
In addition, multi_v7_defconfig supports the dm8168-evm and that
supports root being on a SATA drive, so build the DM816 AHCI driver into
the resulting kernel as well.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Enable RPMSG_QCOM_SMD to get boards working again
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wPTI
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Pull "Qualcomm ARM Based defconfig Updates for v4.13 - Part 2" from Andy Gross:
* Enable RPMSG_QCOM_SMD to get boards working again
* tag 'qcom-defconfig-for-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: enable RPMSG_QCOM_SMD
As of commit 5052de8def, QCOM_SMD_RPM and various other config
options enabled in the qcom_defconfig depends on the RPMSG. If
QCOM_SMD_RPM config option is not selected it disables the
REGULATOR_QCOM_SMD_RPM and other essential config options.
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
-----BEGIN PGP SIGNATURE-----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=uKGf
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Pull "ARM defconfig cleanup" from Krzysztof Kozłowski:
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
* tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: tct_hammer_defconfig: Save defconfig
ARM: s5pv210_defconfig: Save defconfig
ARM: s3c6400_defconfig: Save defconfig
ARM: mini2440_defconfig: Save defconfig
ARM: s3c2410_defconfig: Save defconfig
ARM: exynos_defconfig: Save defconfig
ARM: s5pv210_defconfig: Bring back lost (but wanted) options
ARM: s3c6400_defconfig: Bring back lost (but wanted) options
ARM: s3c2410_defconfig: Bring back lost (but wanted) options
ARM: tct_hammer_defconfig: Bring back lost (but wanted) options
ARM: mini2440_defconfig: Bring back lost (but wanted) options
ARM: defconfig: samsung: Re-order entries to match savedefconfig
ARM: defconfig: Cleanup from old Kconfig options
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRp9UAAoJEFBXWFqHsHzO/uQH/0LtqlmXKraEcYZS7EL+QNQZ
y2gm+/01IYP6Kw9e0jA5gGkTbfGUKRUDV9EtxSfRABrHsxtfB5wejsX6nKQ9AhCZ
taxSgzXG06TtMM1RxoYanKzGuEiNVfUovFYWUP5lEVdz36IDvmafiKJ+/l3J6hU5
YEFxcKqIrDK1370IjPHowoZsg8v5Bx8wyyavWOKpG/jbID7pWTunlIsGKCwF6aUl
xhf/VDiQpKzt27BixieXQsiPlisoXxKy0QZPzooDLwVzRVWB8xOcHa8GBbv7RcfA
HBtMKt+GM6RJByluAWfbv1ERNH3D2tg0gZEEoLAWK4t7VeS5qk1FeAhyj+4Y1EQ=
=jc6x
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
The i.MX defconfig updates for 4.13:
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
* tag 'imx-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: mxs_defconfig: Re-enable MXS LRADC
ARM: mxs_defconfig: Enable CONFIG_CGROUPS
ARM: imx_v6_v7_defconfig: Enable cpufreq governors
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the SENSORS_PWM_FAN in mvebu_v7_defconfig support by gpio
driver since the previous release
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWUTMRCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71RDfAJ0RBMTsdw/g
e/aR1Jdf5BboEJ876gCeIGEATN8sYCxSKHLC7x0hVZnC1p4=
=ZuTF
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.13-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu defconfig for 4.13
Enable the SENSORS_PWM_FAN in mvebu_v7_defconfig support by gpio
driver since the previous release
* tag 'mvebu-defconfig-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
- Switch sama5 to be tickless in idle and enable hrtimer
- Add MCAN
-----BEGIN PGP SIGNATURE-----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=n/us
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.13-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig
defconfig for 4.13:
- Switch sama5 to be tickless in idle and enable hrtimer
- Add MCAN
* tag 'at91-ab-4.13-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: configs: at91: add MCAN driver to sama5_defconfig
ARM: configs: at91: enable HIGH_RES_TIMERS
ARM: configs: at91: make system tickless when idle
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
-----BEGIN PGP SIGNATURE-----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=7EnZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.13,
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
* tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Enable Exynos PRNG along with user-space crypto API.
-----BEGIN PGP SIGNATURE-----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=tl71
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig ARM update for v4.13:
1. Enable Exynos PRNG along with user-space crypto API.
* tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API
Signed-off-by: Olof Johansson <olof@lixom.net>
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FfEE
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Re-sync of davinci_all_defconfig with savedefconfig and enable
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
* tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable CPPI 4.1 USB OTG DMA
ARM: davinci_all_defconfig: enable USB audio/video device support
ARM: davinci_all_defconfig: cleanup with savedefconfig
ARM: davinci_all_defconfig: enable LEGO MINDSTORMS EV3 battery module
Signed-off-by: Olof Johansson <olof@lixom.net>
Select CONFIG_IMX7D_ADC so that the i.MX7 ADC driver can be
built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that the GPIO driver also supports PWM operation, enable the PWM
framework and fan driver in mvebu_v7_defconfig.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427297/
[Ralph Sennhauser: add fan driver to defconfig]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
mtdtests module has some useful tests to verify that
mtd drivers like davinci_nand are working correctly.
Enable it in davinci_all_defconfig to make testing and
debug easier.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Setting trip points is supported by the imx thermal driver and it is
useful to be able to test this without adjusting config.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In order to use the serial and ethernet USB gadget support on
Raspberry Zero, we also need to enable the PHY driver, kernel module
and OTG support.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Generate new defconfig to get rid of obsolete Kconfig entries:
- BUGVERBOSE was changed into DEBUG_BUGVERBOSE and will be enabled by
default (it is useful);
- DETECT_SOFTLOCKUP was changed into LOCKUP_DETECTOR;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_LOWLEVEL_UART_PORT and S3C_DEV_FB are invalid for S5P;
- S5PV210_SETUP_FB_24BPP is gone;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_BOOT_ERROR_RESET, SND_S3C24XX_SOC and SND_SOC_SMDK_WM9713 are
gone;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- NET_ETHERNET, SND_S3C24XX_SOC are gone;
- CRYPTO_FIPS is changed to no (cannot be part of module);
- BINFMT_AOUT cannot be selected anymore;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_BOOT_ERROR_RESET, SMDK2440_CPU2442 are gone;
- ARM_THUMB is changed to yes (selected by default);
- BINFMT_AOUT cannot be selected anymore;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- RFKILL_REGULATOR is gone;
- COMMON_CLK_MAX77802 was merged into COMMON_CLK_MAX77686;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- DEBUG_SPINLOCK_SLEEP was replaced by DEBUG_ATOMIC_SLEEP;
- Use proper DEBUG_S3C_UART1 for UART1;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- PWM is now needed for BACKLIGHT_PWM;
- DEBUG_SPINLOCK_SLEEP was replaced by DEBUG_ATOMIC_SLEEP;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- IP_NF_TARGET_LOG was replaced by NETFILTER_XT_TARGET_LOG;
- NF_NAT was replaced by IP_NF_NAT;
- SERIAL_DEV_BUS is now needed for BT_HCIUART_LL;
- TPS65010 is now needed for MACH_OSIRIS_DVS;
- DMADEVICES and S3C24XX_DMAC are now needed for MMC_S3C;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- USB_GADGET_S3C2410 was replaced by USB_S3C2410;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SERIAL_DEV_BUS is now needed for BT_HCIUART_LL;
- USB_GADGET_S3C2410 was replaced by USB_S3C2410;
- S3C24XX_DMAC is now needed for MMC_S3C;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Re-order entries just like savedefconfig would do so it will be easier
to review the changes before actual savedefconfig.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
These configs are required for booting kernel in QCOM IPQ4019 boards.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This option was removed by "make savedefconfig" in
commit c5054a98bc ("ARM: imx_v6_v7_defconfig: Select SMSC_PHY")
This happened because CONFIG_DEBUG_FS was implicitly selected by
CONFIG_TREE_RCU_TRACE which defaulted to true because CONFIG_RCU_TRACE
was enabled by default by commit 961518259b ("rcu: Enable RCU
tracepoints by default to aid in debugging")
Recently however CONFIG_RCU_TRACE was completely removed by
commit 6e74c237c410 ("rcu: Remove debugfs tracing")
The result is that imx_v6_v7_defconfig no longer includes DEBUG_FS on
linux-next since next-20170517. This is bad, DEBUG_FS is extremely
useful for kernel introspection and testing.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CPPI 4.1 DMA is now supported on AM18xx.
Update the config to use it instead of PIO mode.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable support for USB audio and video camera devices.
Tested on OMAP-L138 LCDK using Logitech webcam and
Plantronics headset.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
davinci_all_defconfig is out of sync with savedefconfig in some places.
Regenerate the default settings by:
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It makes sense to have a stripped-down defconfig for just Gemini, as
it is a pretty small platform used in NAS etc, and will use appended
device tree. It is also quick to compile and test. Hopefully this
defconfig can be a good base for distributions such as OpenWRT.
I plan to add in the config options needed for the different
variants of Gemini as we go along.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the power supply module for the LEGO MINDSTORMS EV3 battery.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the new Exynos pseudo random number generator driver and
user-space API to access crypto algorithms and devices (not only RNG).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable the new Exynos pseudo random number generator driver and
user-space API to access crypto algorithms and devices (not only RNG).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The MXS LRADC driver left staging and has been split. So re-enable
the driver and remove the obsolete entries.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In order to support systemd we need to enable CONFIG_CGROUPS.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the Controller Area Network (MCAN) driver compilation
for sama5 default configuration. Is used by sama5d2 SoC for instance.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This enables by default the high resolution timers on sama5d2 platforms.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This makes Atmel sama5 platforms' system tickless when idle.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Enable more common cpufreq governors in imx defconfig because this is
very useful for testing. In particular you can't use cpufreq-set -f
$FREQ without explicitly defining CONFIG_CPU_FREQ_GOV_USERSPACE=y.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We've traditionally kept defconfig updates in a separate branch, often to
encourage submaintainers to handle those patches separately to avoid conflicts
on the shared files. The amount of changes seem to be decreasing though, so
we might rethink how we handle this going forward.
There really isn't much to write about here. The bulk of changes here
are enabling drivers for whatever platforms the hardware is found on
(and multi-configs).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HXd+
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM: SoC defconfig updates from Olof Johansson:
"We've traditionally kept defconfig updates in a separate branch, often
to encourage submaintainers to handle those patches separately to
avoid conflicts on the shared files. The amount of changes seem to be
decreasing though, so we might rethink how we handle this going
forward.
There really isn't much to write about here. The bulk of changes here
are enabling drivers for whatever platforms the hardware is found on
(and multi-configs)"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
multi_v7_defconfig: make Rockchip usb2-phy built-in
ARM: omap2plus_defconfig: Enable droid 4 devices
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
ARM: configs: aspeed: Add new drivers
ARM: configs: aspeed: Update configs for BMC systems
ARM: omap2plus_defconfig: Enable TI Ethernet PHY
ARM: configs: Add new config fragment to change RAM start point
ARM: configs: stm32: Add I2C support
multi_v7_defconfig: make Rockchip DRM drivers built-in
ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: davinci_all_defconfig: convert to use libata PATA
ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
ARM: omap2plus_defconfig: enable ahci-dm816 module
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
ARM: bcm2835: Enable missing CMA settings for VC4 driver
ARM: socfpga: updates for socfpga_defconfig
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
Add newly unstreamed drivers to the defconfigs for the Aspeed SoCs.
The defconfigs are reworked to be useful for development and testing
of OpenBMC on these systems.
-----BEGIN PGP SIGNATURE-----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=/Q63
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
Aspeed defconfig updates for 4.12
Add newly unstreamed drivers to the defconfigs for the Aspeed SoCs.
The defconfigs are reworked to be useful for development and testing
of OpenBMC on these systems.
* tag 'aspeed-4.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: aspeed: Add new drivers
ARM: configs: aspeed: Update configs for BMC systems
ARM: aspeed: Add CONFIG_SPI_ASPEED_SMC
Signed-off-by: Olof Johansson <olof@lixom.net>
to update to use new ti-cpufreq driver, the rest is just
to enable drivers found on various devices:
- Update to use ti-cpufreq driver that we now have
- Enable SATA for ti81xx as a loadable module
- Enable Ethernet PHY for DP83848
- Enable modem related modules for PPP, QMI and USB ACM
as loadable modules
- Enable droid 4 related drivers as lodable modules except
for PMIC and regulator so eMMC can be used for root
-----BEGIN PGP SIGNATURE-----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=4IRe
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Defconfig updates for omaps for v4.12 merge window. Mostly
to update to use new ti-cpufreq driver, the rest is just
to enable drivers found on various devices:
- Update to use ti-cpufreq driver that we now have
- Enable SATA for ti81xx as a loadable module
- Enable Ethernet PHY for DP83848
- Enable modem related modules for PPP, QMI and USB ACM
as loadable modules
- Enable droid 4 related drivers as lodable modules except
for PMIC and regulator so eMMC can be used for root
* tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable droid 4 devices
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
ARM: omap2plus_defconfig: Enable TI Ethernet PHY
ARM: omap2plus_defconfig: enable ahci-dm816 module
ARM: omap2plus_defconfig: Enable support for ti-cpufreq
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJY65FXAAoJEFBXWFqHsHzOyfYH9A3tKXcNwIUJhzfpLI9FTi4h
1w3j1dJO0hzj8Apd+7o7bJWXLDsNGAs0We8sYeZWjeyOol2wMt6Lc4LrSrn9lQhp
LlLzEKeqiX4UI+Az6YCv5AG8XefCUtb3w5zK2nQkC8w3Ge4fs1l7X9mJCMpRYtPQ
D3rqcksRKoAAVXmaO3d1MHNi2lycVUVdxHW/z7S68oeL6gqEAXC07op9in4TJCaY
zwIvXxuLta1GQszwPGUFRXIb70OhLbJ48433gUZDLLuItlgFAmIEAn9nzFXN3q3p
dpuEeYKSD0IeJZqIkLzaBZ3OCm4/gNrbsduSzmihZSm9W03mJAOoqgnqQBbfTA==
=5aru
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.12:
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
* tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Enable DYNAMIC_DEBUG because it is useful for debugging.
2. Increase CMA memory region to allow handling H.264 1080p videos.
-----BEGIN PGP SIGNATURE-----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=ScYV
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig ARM update for v4.12:
1. Enable DYNAMIC_DEBUG because it is useful for debugging.
2. Increase CMA memory region to allow handling H.264 1080p videos.
* tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
ARM: exynos_defconfig: Enable DYNAMIC_DEBUG and get rid of old ext3
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable QCOM remoteproc and related drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ma84
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM Based defconfig Updates for v4.12
* Enable QCOM remoteproc and related drivers
* tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
Some patches to enable new modules in the defconfig.
-----BEGIN PGP SIGNATURE-----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=a4lF
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Allwinner defconfig changes for 4.12
Some patches to enable new modules in the defconfig.
* tag 'sunxi-defconfig-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in
ARM: multi_v7_defconfig: Enable AC100 RTC driver
ARM: multi_v7_defconfig: Switch sunxi RSB driver from module to built-in
ARM: sunxi_defconfig: Enable AC100 RTC driver
Signed-off-by: Olof Johansson <olof@lixom.net>
PATA driver for DaVinci.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hjLw
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Shift to the newly introduced PalmChip
PATA driver for DaVinci.
* tag 'davinci-for-v4.12/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: convert to use libata PATA
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
----------
- Enable I2C
- Add config fragment for RAM start point
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DGsD
-----END PGP SIGNATURE-----
Merge tag 'stm32-defconfig-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig
STM32 defconfig updates for v4.12, round 1.
Highlights:
----------
- Enable I2C
- Add config fragment for RAM start point
* tag 'stm32-defconfig-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: configs: Add new config fragment to change RAM start point
ARM: configs: stm32: Add I2C support
Signed-off-by: Olof Johansson <olof@lixom.net>
The phy is necessary for the dwc2 controllers driving the usb ports
on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream
drivers (mass-storage as well as usb networking) are already built-in,
so only the phy is missing to allow booting from usb-devices without
to much hassle.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to
be able to mount root on the eMMC. And then POWER_RESET_GPIO
is good to have built-in. The rest of the devices can be loadable
modules.
This gets various devices such as regulators, touchscreen, power
button, HDMI audio, LEDs, RTC, and ADC working.
Note that omapdrm needs to be configured manually as we're still
using omapfb by default.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.
While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org
- LPC Host Controller
- Pulse Width Modulation and Tachometer
- Analog to Digital converter
These three new drivers for the Aspeed SoCs will appear in 4.12. This
defconfig is based on next-20170406.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Developers can develop and users can test with this config against an
OpenBMC userspace. It turns off debugging features to ensure network
performance is high.
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add STM32 crypto support in stm32_defconfig file.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DP83848_PHY i.e. [TI TLK10X 10/100 Mbps PHY] is used on the
am335x-icev2 board. Enable the PHY driver for it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These cause warnings in linux-next, as the symbols have become 'bool' there:
arch/arm/configs/multi_v7_defconfig:600:warning: symbol value 'm' invalid for ROCKCHIP_INNO_HDMI
arch/arm/configs/multi_v7_defconfig:599:warning: symbol value 'm' invalid for ROCKCHIP_DW_MIPI_DSI
arch/arm/configs/multi_v7_defconfig:598:warning: symbol value 'm' invalid for ROCKCHIP_DW_HDMI
arch/arm/configs/multi_v7_defconfig:597:warning: symbol value 'm' invalid for ROCKCHIP_ANALOGIX_DP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
-----BEGIN PGP SIGNATURE-----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=lxDs
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Pull "Broadcom defconfig changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.12,
please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
* tag 'arm-soc/for-4.12/defconfig' of http://github.com/Broadcom/stblinux:
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
ARM: bcm2835: Enable missing CMA settings for VC4 driver
Video capture and display on DA850 and
an ADC driver thats used by Lego EV3.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wj14
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Pull "DaVinci defconfig updates for v4.12" from Sekhar Nori:
DaVinci defconfig updates for enabling
Video capture and display on DA850 and
an ADC driver thats used by Lego EV3.
* tag 'davinci-for-v4.12/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable TI ADS7950
ARM: davinci_all_defconfig: enable IRQ support for pca953x
ARM: davinci_all_defconfig: enable VPIF display modules
stm32_defconfig is used for several STM32 MCU: STM32F429, STM32F469,
STM32F746 and now STM32H743. Each of MCU listed have different interrupts
number mapped on NVIC. STM32F429: 81, STM32F469: 92, STM32F746: 97 and
STM32H743: 149. I could set CPU_V7M_NUM_IRQ to 149 but in order to avoid
forgetting to update this value for next STM32 MCU I prefer to set it to
max value: 240.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The imx6sl-evk board has a LAN8720A ethernet phy supported by SMSC_PHY.
Add this driver to the default imx config since the device is present on
one of the evaluation boards.
This used to work mostly fine with the generic phy driver until
commit 0878fff1f4 ("net: phy: Do not perform software reset for
Generic PHY"). The fact that soft reset is no longer performed
apparently causes RX to sometimes failes which can cause netboot to
timeout on DHCP. This is eventually retried and it works after link
up/down but can takes 90 seconds to reach the login prompt.
This was generated with "make savedefconfig" and it includes a few
additional minor cleanups.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts davinci_all_defconfig to use libata PATA
drivers.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
An adsp-pil node is present in at least the MSM8974 SoC. Simply enable
all Qualcomm remoteproc drivers to avoid more work in the future.
The SMP2P driver is required for adsp-pil to initialize correctly.
Enable the SMSM driver at Bjorn Andersson's request: "We also need
CONFIG_QCOM_SMSM=y here, its currently used to signal state of the ring
buffers for WiFi."
CONFIG_QCOM_WCNSS_CTRL is required to load firmware/configuration data
into the WCNSS core, which handles WiFi and Bluetooth.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This is now supported on the dm8168-evm board, so enable it in
the defconfig for omap2+.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently bcm2835_defconfig has CMA disabled which makes the
HDMI output on a Raspberry Pi 1 stop working during boot:
fb: switching to vc4drmfb from simple
Console: switching to colour dummy device 80x30
[drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vc4-drm soc:gpu: failed to allocate buffer with size 9216000
vc4-drm soc:gpu: Failed to set initial hw configuration.
So enable CMA and DMA_CMA in bcm2835_defconfig.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 4400d9ac05 ("ARM: bcm2835: Enable the VC4 graphics driver in the defconfig")
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch enables Altera TSE support in socfpga_defconfig
Signed-off-by: Jia Jie Ho <ho.jia.jie@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Select CONFIG_HID_MULTITOUCH so that we can have multi touchscreen
funtionality via USB by default on Engicam i.CoreM6 Quad with
OpenFrame Cap 10.1 display boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Select CONFIG_TOUCHSCREEN_MAX11801 so that we can have touchscreen
funtionality by default on Engicam i.CoreM6 Quad boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Current CMA size of 64 Mbytes is right on the edge of being small when
several drivers need to allocate large CMA buffers.
For example, if the s5p-mfc driver needs to pre-allocate CMA memory to
decode a H.264 1080p video, then there won't be enough CMA memory left
for other drivers, such as the exynos-drm driver that may need to
allocate GEM buffers for the display manager.
Increasing CMA size to 96 Mbytes in exynos_defconfig addresses use-cases
such as these.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
DYNAMIC_DEBUG is quite useful for debugging kernels and should not cause
noticeable performance regressions. It makes the kernel bigger (around 4%)
but this difference should not impact typical developer and reference
usage of this defconfig.
Sizes:
zImage-old: 4641496 bytes
zImage-new: 4811384 bytes
text data bss dec hex filename
7031229 2570916 327016 9929161 9781c9 vmlinux-old
7205921 2800052 327016 10332989 9dab3d vmlinux-new
Additionally, remove the EXT3_FS symbol because it is entirely replaced
by EXT4_FS.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
This enables the TI ADS7950 IIO driver. This is used on LEGO MINDSTORMS
EV3. The other IIO configs removed in this patch are selected by
CONFIG_TI_ADS7950, so they are not actually being desabled.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
AM335x, AM437x, DRA7xx, and AM57xx platforms all now depend on
ti-cpufreq driver to enable proper OPPs for use with cpufreq, so
enable the same.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We need IRQs from the tca6416 expander for vpif capture to work on the
da850-evm board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the VPIF display module and the video encoder present on the
da850-evm UI board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The AXP20X regulator support is currently built as a module, which means
it's not available until the root fs has been mounted, but the boot loader
might not have enabled the required regulators, so build their drivers
into the kernel.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The sunxi RSB bus is used for peripherals like voltage regulators and
real-time clocks which should be available early in the boot process.
As a module, the driver will not be available until the root fs has been
mounted, so build the driver into the kernel.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The moxart defconfig wasn't even building a kernel for Moxart,
it was building a kernel for V4T on the nothing platform. Switch
to MULTI_V4 and keep the right drivers, update a few selections.
Now it (presumably) builds a minimalist Moxart kernel again.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver
has been merged into mainline.
There is now a new defconfig file for tango4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=noKQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver has
been merged into mainline.
There is now a new defconfig file for tango4"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: multi_v7_defconfig: enable pstore configs
ARM: multi_v7_defconfig: enable some newly added crypto modules
ARM: davinci_all_defconfig: enable SATA modules
arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
arm64: defconfig: enable CONFIG_MTD_BLOCK
ARM: Import tango4_defconfig
ARM: omap2plus_defconfig: Enable support for RTC M41T80
ARM: omap2plus_defconfig: Enable support for micrell phys
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
arm64: defconfig: Enable NUMA and NUMA_BALANCING
arm64: defconfig: enable SMMUv3 config
ARM: davinci_all_defconfig: enable iio
ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
ARM: configs: stm32: Add RTC support in STM32 defconfig
ARM: defconfig: qcom: add APQ8060 DragonBoard devices
ARM: qcom_defconfig: enable thermal sensors
ARM: qcom_defconfig: add ahci configs
ARM: qcom_defconfig: add pcie and atl1c ethernet configs
ARM: qcom_defconfig: add usb related configs
...
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
CONFIG_SET_MODULE_RONX to the more sensible CONFIG_STRICT_KERNEL_RWX and
CONFIG_STRICT_MODULE_RWX.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>
iQIcBAABCgAGBQJYrJ2ZAAoJEIly9N/cbcAmb4UQAIDnJYF4xecUfxofypQwt7ey
DcR8SH+g/Rkm3v2bUOrVdlP333ePRUEs6C47PgYSLlKsZiQA3H6bsTILHJZGHZ3j
laNH4sjQ0j+Sr2rHXk8fLz3YpHHwIy49bfu2ERXFH92BMnTMCv1h9IWFgOMH+4y5
09n16TPHMUj1k0DGjHO/n03qLIKOo3Xy/Va5dhQ/6dGU4zR4KhOBnhLlG3IU7Atd
KTR+ba/qym7bDQbTezMuaajTiZctr6a45yBKDWu4Knu+ot2a7K7fYvfRT3YVb5SU
aTSYps7NKQbewcQSqNdek1zytoy2Ck7CH511e+3ypwNmao5KQwRgH7OX1pDEXyZv
rGDaVzKMTSddH23jLEKUbpR847Lza9+V3h5YtbMG8GgiCKs91Ec666iEE3NVZBO8
1hiiYhE2iDxi10B/EZZcn2gOt2JaB2m2GxWIrJOz4txtDAWbUYlhUpWEUynBTPQ0
cYBZVnge81awipZJTWUv57LyufnTnMSK3i8Q8t0woj4C7pFbPYfjnKCrgwTQyAvr
mD4uFBrgFb1lftbc3kfTdeoZmXerzvubsstWdr3rU3nsiJFzY1SwJZe8n0THyL4g
DzURFrj/8UXb32Kavysz6FTxFO9u87mJm6yqHn/Y3bEK7Y7cch/NYjRC9Q6dpH+4
ld9apHF6iRrqgf+x6oOh
=7KhR
-----END PGP SIGNATURE-----
Merge tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull rodata updates from Kees Cook:
"This renames the (now inaccurate) DEBUG_RODATA and related
SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and
STRICT_MODULE_RWX"
* tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX
arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
- Operating Performance Points (OPP) framework fixes, cleanups and
switch over from RCU-based synchronization to reference counting
using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach).
- cpufreq core cleanups and documentation updates (Viresh Kumar,
Rafael Wysocki).
- New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer).
- New cpufreq-dt sub-driver for TI SoCs requiring special handling,
like in the AM335x, AM437x, DRA7x, and AM57x families, along with
new DT bindings for it (Dave Gerlach, Paul Gortmaker).
- ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian).
- intel_pstate driver updates including a new sysfs knob to control
the driver's operation mode and fixes related to the no_turbo
sysfs knob and the hardware-managed P-states feature support
(Rafael Wysocki, Srinivas Pandruvada).
- New interface to export ultra-turbo frequencies for the powernv
cpufreq driver (Shilpasri Bhat).
- Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Wei Yongjun).
- devfreq core fixes, mostly related to the sysfs interface exported
by it (Chanwoo Choi, Chris Diamand).
- Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
Choi).
- Device PM QoS extension to support CPUs and support for per-CPU
wakeup (device resume) latency constraints in the cpuidle menu
governor (Alex Shi).
- Wakeup IRQs framework fixes (Grygorii Strashko).
- Generic power domains framework update including a fix to make
it handle asynchronous invocations of *noirq suspend/resume
callbacks correctly (Ulf Hansson, Geert Uytterhoeven).
- Assorted fixes and cleanups in the core suspend/hibernate code,
PM QoS framework and x86 ACPI idle support code (Corentin Labbe,
Geert Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers).
- Update of the analyze_suspend.py script is updated to version 4.5
offering multiple improvements (Todd Brandt).
- New tool for intel_pstate diagnostics using the pstate_sample
tracepoint (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=57xJ
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes go into the Operating Performance Points (OPP)
framework and cpufreq this time, followed by devfreq and some
scattered updates all over.
The OPP changes are mostly related to switching over from RCU-based
synchronization, that turned out to be overly complicated and
problematic, to reference counting using krefs.
In the cpufreq land there are core cleanups, documentation updates, a
new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI
SoCs that require special handling, ARM64 SoCs support for the qoriq
driver, intel_pstate updates, powernv driver update and assorted
fixes.
The devfreq changes are mostly fixes related to the sysfs interface
and some Exynos drivers updates.
Apart from that, the cpuidle menu governor will support per-CPU PM QoS
constraints for the wakeup latency now, some bugs in the wakeup IRQs
framework are fixed, the generic power domains framework should handle
asynchronous invocations of *noirq suspend/resume callbacks from now
on, the analyze_suspend.py script is updated and there is a new tool
for intel_pstate diagnostics.
Specifics:
- Operating Performance Points (OPP) framework fixes, cleanups and
switch over from RCU-based synchronization to reference counting
using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach)
- cpufreq core cleanups and documentation updates (Viresh Kumar,
Rafael Wysocki)
- New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer)
- New cpufreq-dt sub-driver for TI SoCs requiring special handling,
like in the AM335x, AM437x, DRA7x, and AM57x families, along with
new DT bindings for it (Dave Gerlach, Paul Gortmaker)
- ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian)
- intel_pstate driver updates including a new sysfs knob to control
the driver's operation mode and fixes related to the no_turbo sysfs
knob and the hardware-managed P-states feature support (Rafael
Wysocki, Srinivas Pandruvada)
- New interface to export ultra-turbo frequencies for the powernv
cpufreq driver (Shilpasri Bhat)
- Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Wei Yongjun)
- devfreq core fixes, mostly related to the sysfs interface exported
by it (Chanwoo Choi, Chris Diamand)
- Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
Choi)
- Device PM QoS extension to support CPUs and support for per-CPU
wakeup (device resume) latency constraints in the cpuidle menu
governor (Alex Shi)
- Wakeup IRQs framework fixes (Grygorii Strashko)
- Generic power domains framework update including a fix to make it
handle asynchronous invocations of *noirq suspend/resume callbacks
correctly (Ulf Hansson, Geert Uytterhoeven)
- Assorted fixes and cleanups in the core suspend/hibernate code, PM
QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert
Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers)
- Update of the analyze_suspend.py script is updated to version 4.5
offering multiple improvements (Todd Brandt)
- New tool for intel_pstate diagnostics using the pstate_sample
tracepoint (Doug Smythies)"
* tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits)
MAINTAINERS: cpufreq: add bmips-cpufreq.c
PM / QoS: Fix memory leak on resume_latency.notifiers
PM / Documentation: Spelling s/wrtie/write/
PM / sleep: Fix test_suspend after sleep state rework
cpufreq: CPPC: add ACPI_PROCESSOR dependency
cpufreq: make ti-cpufreq explicitly non-modular
cpufreq: Do not clear real_cpus mask on policy init
tools/power/x86: Debug utility for intel_pstate driver
AnalyzeSuspend: fix drag and zoom bug in javascript
PM / wakeirq: report a wakeup_event on dedicated wekup irq
PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs
PM / wakeirq: Enable dedicated wakeirq for suspend
cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
Documentation: dt: add bindings for ti-cpufreq
PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
cpufreq: qoriq: Don't look at clock implementation details
cpufreq: qoriq: add ARM64 SoCs support
PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n
cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()
...
This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It's useful to get testing on these features on various boards (e.g., on
KernelCI), and (when they're working) the ramoops feature is extremely
helpful for debugging live systems.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers
as modules for multi_v7_defconfig builds.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Gwrq
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.11/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Pull "Enable SATA support found on DA850 SoC" from Sekhar Nori:
* tag 'davinci-for-v4.11/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable SATA modules
Both of these options are poorly named. The features they provide are
necessary for system security and should not be considered debug only.
Change the names to CONFIG_STRICT_KERNEL_RWX and
CONFIG_STRICT_MODULE_RWX to better describe what these options do.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
A single patch to enable the thermal DT support in sunxi_defconfig
-----BEGIN PGP SIGNATURE-----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=tqpm
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Pull "Allwinner defconfig changes for 4.11" from Maxime Ripard:
A single patch to enable the thermal DT support in sunxi_defconfig
* tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Add CONFIG_THERMAL_OF
The symbols can no longer be used as loadable modules, leading to a harmless Kconfig
warning:
arch/arm/configs/imote2_defconfig:60:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/imote2_defconfig:59:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
arch/arm/configs/ezx_defconfig:68:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/ezx_defconfig:67:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
Let's make them built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This doesn't have any benefit apart from saving a small amount of memory
when it is disabled. The ifdef hackery in the code makes it dirty
unnecessarily.
Clean it up by removing the Kconfig option completely. Few defconfigs
are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with
CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
