Commit Graph

16 Commits

Author SHA1 Message Date
Sakari Ailus
7e84dd0b15 media: dt-bindings: media: Specify bus type for MIPI D-PHY, others, explicitly
Allow specifying the bus type explicitly for MIPI D-PHY, parallel and
Bt.656 busses. This is useful for devices that can make use of different
bus types. There are CSI-2 transmitters and receivers but the PHY
selection needs to be made between C-PHY and D-PHY; many devices also
support parallel and Bt.656 interfaces but the means to pass that
information to software wasn't there.

Autodetection (value 0) is removed as an option as the property could be
simply omitted in that case.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:04:01 -04:00
Jacopo Mondi
75571ee0e5 media: dt-bindings: media: Document data-enable-active property
Add 'data-enable-active' property to endpoint node properties list.

The property allows to specify the polarity of the data-enable signal,
which when in active state determinates when data lines have to sampled
for valid pixel data.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24 14:57:06 -04:00
Sakari Ailus
6d4e7919d7 media: dt-bindings: media: Define "rotation" property for sensors
Sensors are occasionally mounted upside down to systems such as mobile
phones or tablets. In order to use such a sensor without having to turn
every image upside down, most camera sensors support reversing the readout
order by setting both horizontal and vertical flipping.

This patch documents the "rotation" property for camera sensors, mirroring
what is defined for displays in
Documentation/devicetree/bindings/display/panel/panel.txt .

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28 08:42:20 -04:00
Mathieu Malaterre
4c9847b737 dt-bindings: Remove leading 0x from bindings notation
Improve the binding example by removing all the leading 0x to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

Converted using the following command:

find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} +

This is a follow up to commit 48c926cd34

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-06 14:56:33 -06:00
Sakari Ailus
95293f79d5 media: dt: bindings: Add lens-focus binding for image sensors
The lens-focus property contains a phandle to the lens voice coil driver
that is associated to the sensor; typically both are contained in the same
camera module.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: devicetree@vger.kernel.org
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 13:59:24 -04:00
Sakari Ailus
26baf6dd63 media: dt: bindings: Add a binding for flash LED devices associated to a sensor
Camera flash drivers (and LEDs) are separate from the sensor devices in
DT. In order to make an association between the two, provide the
association information to the software.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: devicetree@vger.kernel.org
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 13:59:03 -04:00
Sakari Ailus
7571358dd2 media: dt: bindings: media: Document data lane numbering without lane reordering
Most devices do not support lane reordering and in many cases the
documentation of the data-lanes property is incomplete for such devices.
Document that in case the lane reordering isn't supported, monotonically
incremented values from 0 or 1 shall be used.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-16 16:54:45 -07:00
Sakari Ailus
a197c7fccc media: dt: bindings: media: Document practices for DT bindings, ports, endpoints
Port and endpoint numbering has been omitted in DT binding documentation
for a large number of devices. Also common properties the device uses have
been missed in binding documentation. Make it explicit that these things
need to be documented.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-16 16:52:54 -07:00
Sakari Ailus
48b0132520 media: dt: bindings: Add strobe property for CCP2
Document the CSI1/CCP2 property strobe. It signifies the clock or
strobe mode.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:30:32 -04:00
Sakari Ailus
4303a0c959 media: dt: bindings: Explicitly specify bus type
In the vast majority of cases the bus type is known to the driver(s)
since a receiver or transmitter can only support a single one. There
are cases however where different options are possible, or the bus type
cannot be automatically detected.

The existing V4L2 OF support tries to figure out the bus type and
parse the bus parameters based on that. This does not scale too well
as there are multiple serial busses that share common properties.

Some hardware also supports multiple types of busses on the same
interfaces.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19 15:30:12 -04:00
Sakari Ailus
9e1ee1b730 [media] dt: bindings: Add lane-polarity property to endpoint nodes
Add lane-polarity property to endpoint nodes. This essentially tells that
the order of the differential signal wires is inverted.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 16:45:52 -03:00
Linus Torvalds
cdd305454e DeviceTree changes for 3.20:
- DT unittests for I2C probing and overlays from Pantelis Antoniou
 - Remove DT unittest dependency on OF_DYNAMIC from Gaurav Minocha
 - Add Tegra compatible strings missing for newer parts from Paul
 Walmsley
 - Various vendor prefix additions
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU3CJVAAoJEMhvYp4jgsXieMgIAKlpr8gcMq/ORRRbVJ9jrL64
 A0gPZZEBBVJ0BX7b6mvz15/6Zt70naoE23tMgaCQpR620ox9xFshmwhzHct9npiQ
 KRode+9QhFRvA3Pc5LXhfD+bnyJ3Z4pWPrbY6sDDL9txqolpUhU4fz8Y3InwN5YB
 GSD6NG3UKDmrTOvkR1j2WrCIkSeXYAEKtnuQlN/+eZXM6kzZYDcdskHv6o18mf4b
 Ys6mwkfJdN3UZVQE8ZxUSi3wdC9U7mErNOZuc2rgL9Qb+q0RHtgE2GTI2Zxw0Sj1
 BlCO1Fs0sYhOunZIazLJht7cenGbBMf+ed2DB4VLNiEmPhavqdv9wjNt9jOjh5k=
 =Aviy
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree changes from Rob Herring:

 - DT unittests for I2C probing and overlays from Pantelis Antoniou

 - Remove DT unittest dependency on OF_DYNAMIC from Gaurav Minocha

 - Add Tegra compatible strings missing for newer parts from Paul
   Walmsley

 - Various vendor prefix additions

* tag 'devicetree-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Add vendor prefix for OmniVision Technologies
  of: Use ovti for Omnivision
  of: Add vendor prefix for Truly Semiconductors Limited
  of: Add vendor prefix for Himax Technologies Inc.
  of/fdt: fix sparse warning
  of: unitest: Add I2C overlay unit tests.
  Documentation: DT: document compatible string existence requirement
  Documentation: DT bindings: add nvidia, tegra132-denver compatible string
  Documentation: DT bindings: add more Tegra chip compatible strings
  of: EXPORT_SYMBOL_GPL of_property_read_u64_array
  of: Fix brace position for struct of_device_id definition
  of/unittest: Remove obsolete code
  dt-bindings: use isil prefix for Intersil in vendor-prefixes.txt
  Add AD Holdings Plc. to vendor-prefixes.
  dt-bindings: Add Silicon Mitus vendor prefix
  Removes OF_UNITTEST dependency on OF_DYNAMIC config symbol
  pinctrl: fix up device tree bindings
  DT: Vendors: Add Everspin
  doc: add bindings document for altera fpga manager
  drivers: of: Export of_reserved_mem_device_{init,release}
2015-02-12 08:58:43 -08:00
Fabio Estevam
3cfd590559 of: Use ovti for Omnivision
The correct symbol for OmniVision Technologies is 'ovti', so let's convert it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2015-02-04 10:51:10 -06:00
Sakari Ailus
0f8e253785 [media] of: v4l: Document link-frequencies property in video-interfaces.txt
link-frequencies is a 64-bit unsigned integer array of allowed link
frequencies.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-23 11:33:49 -02:00
Lad, Prabhakar
d1d70aa69d [media] media: OF: add "sync-on-green-active" property
This patch adds 'sync-on-green-active' property as part
of endpoint property.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24 04:15:05 -03:00
Guennadi Liakhovetski
53c5b6c95f [media] Add common video interfaces OF bindings documentation
This patch adds a document describing common OF bindings for video
capture, output and video processing devices. It is curently mainly
focused on video capture devices, with data busses defined by
standards such as ITU-R BT.656 or MIPI-CSI2.
It also documents a method of describing data links between devices.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-31 10:32:37 -03:00