There are several bugs at the signal strength algorithm:
- It is using logical OR, instead of bit OR;
- It doesn't wait up to 18 ms as it should;
- the strength range is not ok.
Rework on it, in order to make it work.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If g_tuner is called and the tuner is able to return the signal strength
via has_signal(), call the tunner callback to retrieve such data for all
tuner types, not only for radio ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change the firmware logic to use request_firmware_nowait(), and
to preserve the loaded firmwares in memory, to reduce the risk
of troubles with buggy userspace apps.
With this change, while the firmware is being loaded, the driver
will return -EAGAIN to any calls. If, for some reason, firmware
failed to be loaded from userspace, it will return -ENODEV.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If firmware is not loaded for some reason, or if it is not ready
yet, it makes no sense to honour to any DVB callbacks.
So, return -EAGAIN, as the error condition may be temporary.
If the device doesn't initialize, either because it requires a
firmware or because there's an error during init_drxk, returns
-ENODEV, to indicate such error, on all DVB callbacks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Don't allow other devices at the same I2C bus to use it during
firmware load, in order to prevent using the device while it is
not on a sane state.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As it will be using the unlocked version of i2c_transfer during
firmware loads, make sure that the priv state routine will be
used on all I2C calls, in preparation for the next patch that
will implement an exclusive lock mode to be used during firmware
load, at drxk_init.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The firmware blob may not be available when the driver probes.
Instead of blocking the whole kernel use request_firmware_nowait() and
continue without firmware.
This shouldn't be that bad on drx-k devices, as they all seem to have an
internal firmware. So, only the firmware update will take a little longer
to happen.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some drivers (in particular for TV cards) need exclusive access to
their I2C buses for specific operations. Export an unlocked flavor
of i2c_transfer to give them full control.
The unlocked flavor has the following limitations:
* Obviously, caller must hold the i2c adapter lock.
* No debug messages are logged. We don't want to log messages while
holding a rt_mutex.
* No check is done on the existence of adap->algo->master_xfer. It
is thus the caller's responsibility to ensure that the function is
OK to call.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* v4l_for_linus: (44 commits)
[media] smia: Fix compile failures
[media] Fix VIDIOC_DQEVENT docbook entry
[media] s5p-fimc: Fix control creation function
[media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
[media] s5p-mfc: Fix setting controls
[media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
[media] v4l/s5p-mfc: corrected encoder v4l control definitions
[media] v4l: mem2mem_testdev: Fix race conditions in driver
[media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
[media] cxd2820r: Fix an incorrect modulation type bitmask
[media] em28xx: Show a warning if the board does not support remote controls
[media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
[media] USB: Staging: media: lirc: initialize spinlocks before usage
[media] Revert "[media] media: mx2_camera: Fix mbus format handling"
[media] bw-qcam: driver and pixfmt documentation fixes
[media] cx88: fix firmware load on big-endian systems
[media] cx18: support big-endian systems
[media] ivtv: fix support for big-endian systems
[media] tuner-core: return the frequency range of the correct tuner
[media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
...
Conflicts:
Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
drivers/media/video/em28xx/em28xx-cards.c
Make it possible for gpio-ir-recv users to choose a map name.
Cc: Ravi Kumar V <kumarrav@codeaurora.org>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add missing information so that udev can create an entry for gpio-ir-recv under
/dev/input/by-path/ .
Cc: Ravi Kumar V <kumarrav@codeaurora.org>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert radio-sf16fmi to use generic LM7000 driver.
Tested with SF16-FMI, SF16-FMP and SF16-FMD.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert radio-aimslab to use generic LM7000 driver.
Tested with Reveal RA300.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported
as there is no known HW with AM implemented.
This will be used by radio-aimslab and radio-sf16fmi.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This reverts commit 4ecbb69414.
As requested by Hans Verkuil:
> You accidentally merged the wrong first version of the lm7000 patch series.
>
> These are the correct second version patches:
>
> http://patchwork.linuxtv.org/patch/11689/
> http://patchwork.linuxtv.org/patch/11690/
> http://patchwork.linuxtv.org/patch/11691/
>
> The second version is much simpler and doesn't require the creation of a whole
> new driver.
Requested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This reverts commit bece083a6b.
As requested by Hans Verkuil:
> You accidentally merged the wrong first version of the lm7000 patch series.
>
> These are the correct second version patches:
>
> http://patchwork.linuxtv.org/patch/11689/
> http://patchwork.linuxtv.org/patch/11690/
> http://patchwork.linuxtv.org/patch/11691/
>
> The second version is much simpler and doesn't require the creation of a whole
> new driver.
Requested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This reverts commit 1e70a6cf7e.
As requested by Hans Verkuil:
> You accidentally merged the wrong first version of the lm7000 patch series.
>
> These are the correct second version patches:
>
> http://patchwork.linuxtv.org/patch/11689/
> http://patchwork.linuxtv.org/patch/11690/
> http://patchwork.linuxtv.org/patch/11691/
>
> The second version is much simpler and doesn't require the creation of a whole
> new driver.
Requested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is basically s/getmode/getrxsubchans/ and s/setmode/setaudmode/
with some whitespace adjustment in affected lines to please the eye.
The rename is done to point out their relation to the rxsubchans and
audmode fields of struct v4l2_tuner.
I also corrected a commented out call to v4l_dbg in one of the lines.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stops the media entity pipeline which was started earlier
if fimc_pipeline_validate fails.
[s.nawrocki: reworked to not exceed 80 characters line length]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch is an update to changed media_entity_pipeline_start()
signature in commit af88be3887,
"media: Add link_validate() op to check links to the sink pad"
It fixes the following warning:
drivers/media/video/s5p-fimc/fimc-lite.c: In function ‘fimc_lite_streamon’:
drivers/media/video/s5p-fimc/fimc-lite.c:765:29: warning: ignoring return value
of ‘media_entity_pipeline_start’, declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Commit 77e7c4e624
"v4l: Allow changing control handler lock" changed
the lock field of struct v4l2_ctrl_handler to a pointer
and this driver wasn't updated properly. This patch fixes
following warning:
drivers/media/video/s5p-fimc/fimc-core.c: In function ‘fimc_ctrls_activate’:
drivers/media/video/s5p-fimc/fimc-core.c:644: warning: passing argument 1 of ‘mutex_lock’ from incompatible pointer type
include/linux/mutex.h:152: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
drivers/media/video/s5p-fimc/fimc-core.c:663: warning: passing argument 1 of ‘mutex_unlock’ from incompatible pointer type
include/linux/mutex.h:169: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Shorten pixel format descriptions that exceed 32 characters
so they're not being truncated when queried from user space.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Only suspend the video pipeline devices if they were active before
the pm.suspend() helper is called. This patch prevents following error:
/# echo mem > /sys/power/state
[ 34.965000] PM: Syncing filesystems ... done.
[ 35.035000] Freezing user space processes ... (elapsed 0.01 seconds) done.
...
[ 35.105000] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -22
[ 35.105000] PM: Device exynos-fimc-lite.1 failed to suspend: error -22
[ 35.105000] PM: Some devices failed to suspend
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The camera clocks managed by the driver were improperly reference counted
and remained disabled when multiple video nodes were opened simultaneously.
It manifested itself with following warning:
[12.920000] WARNING: at drivers/media/video/s5p-fimc/fimc-mdevice.c:787 __fimc_md_set_camclk+0x1c0/0x1dc()
[13.005000] Modules linked in:
[13.005000] Backtrace:
[13.040000] [<c0013084>] (dump_backtrace+0x0/0x10c) from [<c0454b70>] (dump_stack+0x18/0x1c)
[13.070000] r7:00000009 r6:00000313 r5:c02d576c r4:00000000
[13.155000] [<c0454b58>] (dump_stack+0x0/0x1c) from [<c0022ec4>] (warn_slowpath_common+0x54/0x6c)
[13.285000] [<c0022e70>] (warn_slowpath_common+0x0/0x6c) from [<c0022f00>] (warn_slowpath_null+0x24/0x2c)
[13.360000] r9:e1981010 r8:00000000 r7:c061d3fc r6:e1981010 r5:e1981030
[13.430000] r4:00000000
[13.430000] [<c0022edc>] (warn_slowpath_null+0x0/0x2c) from [<c02d576c>] (__fimc_md_set_camclk+0x1c0/0x1dc)
[13.550000] [<c02d55ac>] (__fimc_md_set_camclk+0x0/0x1dc) from [<c02d57b0>] (fimc_md_set_camclk+0x28/0x2c)
[13.630000] [<c02d5788>] (fimc_md_set_camclk+0x0/0x2c) from [<c02d57e8>] (__fimc_pipeline_shutdown+0x34/0x50)
[13.705000] [<c02d57b4>] (__fimc_pipeline_shutdown+0x0/0x50) from [<c02d5844>] (fimc_pipeline_shutdown+0x40/0x58)
[13.765000] r5:e2391200 r4:e2357704
[13.805000] [<c02d5804>] (fimc_pipeline_shutdown+0x0/0x58) from [<c02d4754>] (fimc_capture_close+0xcc/0xe4)
[13.915000] r5:e1b396c0 r4:e2357410
[13.915000] [<c02d4688>] (fimc_capture_close+0x0/0xe4) from [<c02b2d5c>] (v4l2_release+0x5c/0x80)
[13.970000] r7:00000010 r6:e1d2d990 r5:e1b396c0 r4:e2394800
[14.000000] [<c02b2d00>] (v4l2_release+0x0/0x80) from [<c00b66cc>] (fput+0xc0/0x22c)
[14.015000] r5:c157ef30 r4:e1b396c0
[14.015000] [<c00b660c>] (fput+0x0/0x22c) from [<c00b2ca0>] (filp_close+0x60/0x80)
[14.080000] [<c00b2c40>] (filp_close+0x0/0x80) from [<c00b2d78>] (sys_close+0xb8/0xf4)
[14.125000] r7:00000001 r6:e1b396c0 r5:c1400340 r4:c1400300
[14.125000] [<c00b2cc0>] (sys_close+0x0/0xf4) from [<c000f300>] (ret_fast_syscall+0x0/0x30)
[14.205000] r7:00000006 r6:beee5b94 r5:00000003 r4:b6f64fac
Fix this, as well as potential memory leaks due to not calling
v4l2_fh_release() on some error paths.
Also remove some error logs printed for events that aren't critical and
are normal conditions for some system configurations.
Also check if the device have been properly run-time enabled during
video node open.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The checks are already done at the v4l2 framework.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Allow memory buffer size to be increased by means of
struct v4l2_pix_plane_format::sizeimage at VIDIOC_S_FMT ioctl.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver is supposed to create active media link from sensor N
(or its corresponding s5p-mipi-csis entity) to FIMC.N by default.
Instead s5p-mipi-csis.N entity gets always connected by a default
active link to FIMC.N, regardless of there are parallel bus sensor
entities already connected to FIMC.N. Correct this.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When video pipeline initialization fails, the ST_CAPT_BUSY flag
needs to be cleared before pm_runtime_put_sync is called.
Otherwise the runtime suspend routine tries to suspend device,
rather than just turning it off. Also fix potential null pointer
dereference in fimc_pipeline_shutdown().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The switch/case was setting clock_setting that is not being used. Both switch/case and the variable definition were removed.
Currently clock is being calculated by the formula:
(state->fclk/1000000 - 8)
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In function saa7164_api_i2c_read variable regval was set but not used.
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Saves 255 bytes of stack memory on cx231xx_usb_probe() by removing a char array.
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Commit 39c3d48845 ("[media] cpia, stradis:
remove deprecated V4L1 drivers") removed the last file including these
five headers. Apparently it was just an oversight to keep them in the
tree. They can safely be removed now.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The windows driver used different values for the GPIOs and analog
decoder configuration. The values from the windows driver are now
used.
It also seems that the windows driver has LNA always disabled.
Thus we are doing the same (using the same flags as on windows).
I (only) tested with DVB-T and it worked quite well.
[mchehab@redhat.com: Fix merge conflicts and tested with DVB-C]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As of June 2012 it uses the same firmware as the Hauppauge WinTV HVR 930C.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert radio-aimslab to use generic LM7000 driver.
Tested with Reveal RA300.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported
as there is no known HW with AM implemented.
This will be used by radio-aimslab and radio-sf16fmi.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is a specific header sound/ac97_codec.h that defines these.
All drivers should use it instead of rolling its own set of macros.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver allowed only one open filehandle. This is against the spec, so
fix the driver by assigning proper ownership when streaming.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
