Commit Graph

19379 Commits

Author SHA1 Message Date
Andrii Nakryiko
d3a3aa0c59 libbpf: Fix off-by-one error in ELF sanity check
libbpf's bpf_object__elf_collect() does simple sanity check after iterating
over all ELF sections, if checks that .strtab index is correct. Unfortunately,
due to section indices being 1-based, the check breaks for cases when .strtab
ends up being the very last section in ELF.

Fixes: 77ba9a5b48 ("tools lib bpf: Fetch map names from correct strtab")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191028233727.1286699-1-andriin@fb.com
2019-10-28 20:27:40 -07:00
Magnus Karlsson
94ff9ebb49 libbpf: Fix compatibility for kernels without need_wakeup
When the need_wakeup flag was added to AF_XDP, the format of the
XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the
kernel to take care of compatibility issues arrising from running
applications using any of the two formats. However, libbpf was
not extended to take care of the case when the application/libbpf
uses the new format but the kernel only supports the old
format. This patch adds support in libbpf for parsing the old
format, before the need_wakeup flag was added, and emulating a
set of static need_wakeup flags that will always work for the
application.

v2 -> v3:
* Incorporated code improvements suggested by Jonathan Lemon

v1 -> v2:
* Rebased to bpf-next
* Rewrote the code as the previous version made you blind

Fixes: a4500432c2 ("libbpf: add support for need_wakeup flag in AF_XDP part")
Reported-by: Eloy Degen <degeneloy@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com
2019-10-28 20:25:32 -07:00
Ilya Leoshkevich
e93d99180a selftests/bpf: Restore $(OUTPUT)/test_stub.o rule
`make O=/linux-build kselftest TARGETS=bpf` fails with

	make[3]: *** No rule to make target '/linux-build/bpf/test_stub.o', needed by '/linux-build/bpf/test_verifier'

The same command without the O= part works, presumably thanks to the
implicit rule.

Fix by restoring the explicit $(OUTPUT)/test_stub.o rule.

Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191028102110.7545-1-iii@linux.ibm.com
2019-10-28 16:16:10 +01:00
Ilya Leoshkevich
313e7f6fb1 selftest/bpf: Use -m{little, big}-endian for clang
When cross-compiling tests from x86 to s390, the resulting BPF objects
fail to load due to endianness mismatch.

Fix by using BPF-GCC endianness check for clang as well.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191028102049.7489-1-iii@linux.ibm.com
2019-10-28 16:15:51 +01:00
David S. Miller
5b7fe93db0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-10-27

The following pull-request contains BPF updates for your *net-next* tree.

We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).

The main changes are:

 1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
    assembly code. The work here teaches BPF verifier to recognize
    kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
    such that verifier allows direct use of bpf_skb_event_output() helper
    used in tc BPF et al (w/o probing memory access) that dumps skb data
    into perf ring buffer. Also add direct loads to probe memory in order
    to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.

 2) Big batch of changes to improve libbpf and BPF kselftests. Besides
    others: generalization of libbpf's CO-RE relocation support to now
    also include field existence relocations, revamp the BPF kselftest
    Makefile to add test runner concept allowing to exercise various
    ways to build BPF programs, and teach bpf_object__open() and friends
    to automatically derive BPF program type/expected attach type from
    section names to ease their use, from Andrii Nakryiko.

 3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.

 4) Allow to read BTF as raw data from bpftool. Most notable use case
    is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.

 5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
    manages to improve "rx_drop" performance by ~4%., from Björn Töpel.

 6) Fix to restore the flow dissector after reattach BPF test and also
    fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.

 7) Improve verifier's BTF ctx access for use outside of raw_tp, from
    Martin KaFai Lau.

 8) Improve documentation for AF_XDP with new sections and to reflect
    latest features, from Magnus Karlsson.

 9) Add back 'version' section parsing to libbpf for old kernels, from
    John Fastabend.

10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
    from KP Singh.

11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
    to improve insn coverage for built BPF progs, from Yonghong Song.

12) Misc minor cleanups and fixes, from various others.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-26 22:57:27 -07:00
Roman Mashak
b951248518 tc-testing: list required kernel options for act_ct action
Updated config with required kernel options for conntrac TC action,
so that tdc can run the tests.

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-26 11:40:22 -07:00
David S. Miller
4b1f5ddaff Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next,
more specifically:

* Updates for ipset:

1) Coding style fix for ipset comment extension, from Jeremy Sowden.

2) De-inline many functions in ipset, from Jeremy Sowden.

3) Move ipset function definition from header to source file.

4) Move ip_set_put_flags() to source, export it as a symbol, remove
   inline.

5) Move range_to_mask() to the source file where this is used.

6) Move ip_set_get_ip_port() to the source file where this is used.

* IPVS selftests and netns improvements:

7) Two patches to speedup ipvs netns dismantle, from Haishuang Yan.

8) Three patches to add selftest script for ipvs, also from
   Haishuang Yan.

* Conntrack updates and new nf_hook_slow_list() function:

9) Document ct ecache extension, from Florian Westphal.

10) Skip ct extensions from ctnetlink dump, from Florian.

11) Free ct extension immediately, from Florian.

12) Skip access to ecache extension from nf_ct_deliver_cached_events()
    this is not correct as reported by Syzbot.

13) Add and use nf_hook_slow_list(), from Florian.

* Flowtable infrastructure updates:

14) Move priority to nf_flowtable definition.

15) Dynamic allocation of per-device hooks in flowtables.

16) Allow to include netdevice only once in flowtable definitions.

17) Rise maximum number of devices per flowtable.

* Netfilter hardware offload infrastructure updates:

18) Add nft_flow_block_chain() helper function.

19) Pass callback list to nft_setup_cb_call().

20) Add nft_flow_cls_offload_setup() helper function.

21) Remove rules for the unregistered device via netdevice event.

22) Support for multiple devices in a basechain definition at the
    ingress hook.

22) Add nft_chain_offload_cmd() helper function.

23) Add nft_flow_block_offload_init() helper function.

24) Rewind in case of failing to bind multiple devices to hook.

25) Typo in IPv6 tproxy module description, from Norman Rasmussen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-26 11:35:43 -07:00
Andrii Nakryiko
027cbaaf61 selftests/bpf: Fix .gitignore to ignore no_alu32/
When switching to alu32 by default, no_alu32/ subdirectory wasn't added
to .gitignore. Fix it.

Fixes: e13a2fe642 ("tools/bpf: Turn on llvm alu32 attribute by default")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191025045503.3043427-1-andriin@fb.com
2019-10-25 23:41:22 +02:00
Jiri Olsa
a943646036 bpftool: Allow to read btf as raw data
The bpftool interface stays the same, but now it's possible
to run it over BTF raw data, like:

  $ bpftool btf dump file /sys/kernel/btf/vmlinux
  [1] INT '(anon)' size=4 bits_offset=0 nr_bits=32 encoding=(none)
  [2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none)
  [3] CONST '(anon)' type_id=2

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191024133025.10691-1-jolsa@kernel.org
2019-10-25 23:34:47 +02:00
KP Singh
58eeb2289a libbpf: Fix strncat bounds error in libbpf_prog_type_by_name
On compiling samples with this change, one gets an error:

 error: ‘strncat’ specified bound 118 equals destination size
  [-Werror=stringop-truncation]

    strncat(dst, name + section_names[i].len,
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     sizeof(raw_tp_btf_name) - (dst - raw_tp_btf_name));
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

strncat requires the destination to have enough space for the
terminating null byte.

Fixes: f75a697e09 ("libbpf: Auto-detect btf_id of BTF-based raw_tracepoint")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191023154038.24075-1-kpsingh@chromium.org
2019-10-23 10:17:28 -07:00
Andrii Nakryiko
45e587b5e8 selftests/bpf: Fix LDLIBS order
Order of $(LDLIBS) matters to linker, so put it after all the .o and .a
files.

Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191023153128.3486140-1-andriin@fb.com
2019-10-23 10:09:48 -07:00
Andrii Nakryiko
9bc6384b36 selftests/bpf: Move test_section_names into test_progs and fix it
Make test_section_names into test_progs test. Also fix ESRCH expected
results. Add uprobe/uretprobe and tp/raw_tp test cases.

Fixes: dd4436bb83 ("libbpf: Teach bpf_object__open to guess program types")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191023060913.1713817-1-andriin@fb.com
2019-10-23 10:06:46 -07:00
Björn Töpel
d7d962a095 libbpf: Use implicit XSKMAP lookup from AF_XDP XDP program
In commit 43e74c0267 ("bpf_xdp_redirect_map: Perform map lookup in
eBPF helper") the bpf_redirect_map() helper learned to do map lookup,
which means that the explicit lookup in the XDP program for AF_XDP is
not needed for post-5.3 kernels.

This commit adds the implicit map lookup with default action, which
improves the performance for the "rx_drop" [1] scenario with ~4%.

For pre-5.3 kernels, the bpf_redirect_map() returns XDP_ABORTED, and a
fallback path for backward compatibility is entered, where explicit
lookup is still performed. This means a slight regression for older
kernels (an additional bpf_redirect_map() call), but I consider that a
fair punishment for users not upgrading their kernels. ;-)

v1->v2: Backward compatibility (Toke) [2]
v2->v3: Avoid masking/zero-extension by using JMP32 [3]

[1] # xdpsock -i eth0 -z -r
[2] https://lore.kernel.org/bpf/87pnirb3dc.fsf@toke.dk/
[3] https://lore.kernel.org/bpf/87v9sip0i8.fsf@toke.dk/

Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191022072206.6318-1-bjorn.topel@gmail.com
2019-10-23 10:03:52 -07:00
Andrii Nakryiko
e00aca65e6 libbpf: Make DECLARE_LIBBPF_OPTS macro strictly a variable declaration
LIBBPF_OPTS is implemented as a mix of field declaration and memset
+ assignment. This makes it neither variable declaration nor purely
statements, which is a problem, because you can't mix it with either
other variable declarations nor other function statements, because C90
compiler mode emits warning on mixing all that together.

This patch changes LIBBPF_OPTS into a strictly declaration of variable
and solves this problem, as can be seen in case of bpftool, which
previously would emit compiler warning, if done this way (LIBBPF_OPTS as
part of function variables declaration block).

This patch also renames LIBBPF_OPTS into DECLARE_LIBBPF_OPTS to follow
kernel convention for similar macros more closely.

v1->v2:
- rename LIBBPF_OPTS into DECLARE_LIBBPF_OPTS (Jakub Sitnicki).

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191022172100.3281465-1-andriin@fb.com
2019-10-22 21:35:03 +02:00
Yonghong Song
e13a2fe642 tools/bpf: Turn on llvm alu32 attribute by default
LLVM alu32 was introduced in LLVM7:

  https://reviews.llvm.org/rL325987
  https://reviews.llvm.org/rL325989

Experiments showed that in general performance is better with alu32
enabled:

  https://lwn.net/Articles/775316/

This patch turns on alu32 with no-flavor test_progs which is tested
most often. The flavor test at no_alu32/test_progs can be used to
test without alu32 enabled. The Makefile check for whether LLVM
supports '-mattr=+alu32 -mcpu=v3' is removed as LLVM7 should be
available for recent distributions and also latest LLVM is preferred
to run BPF selftests.

Note that jmp32 is checked by -mcpu=probe and will be enabled if the
host kernel supports it.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191022043119.2625263-1-yhs@fb.com
2019-10-22 21:13:39 +02:00
Roman Mashak
a8fad5459d tc-testing: updated pedit TDC tests
Added test cases for IP header operations:
- set tos/precedence
- add value to tos/precedence
- clear tos/precedence
- invert tos/precedence

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21 10:38:51 -07:00
Andrii Nakryiko
1678e33c21 selftest/bpf: Get rid of a bunch of explicit BPF program type setting
Now that libbpf can correctly guess BPF program types from section
names, remove a bunch of explicit bpf_program__set_type() calls
throughout tests.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-8-andriin@fb.com
2019-10-21 14:49:12 +02:00
Andrii Nakryiko
8af1c8b8d6 selftests/bpf: Make reference_tracking test use subtests
reference_tracking is actually a set of 9 sub-tests. Make it explicitly so.

Also, add explicit "classifier/" prefix to BPF program section names to
let libbpf correctly guess program type. Thus, also remove explicit
bpf_prog__set_type() call.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-7-andriin@fb.com
2019-10-21 14:49:12 +02:00
Andrii Nakryiko
f90415e960 selftests/bpf: Make a copy of subtest name
test_progs never created a copy of subtest name, rather just stored
pointer to whatever string test provided. This is bad as that string
might be freed or modified by the end of subtest. Fix this by creating
a copy of given subtest name when subtest starts.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-6-andriin@fb.com
2019-10-21 14:49:12 +02:00
Andrii Nakryiko
dd4436bb83 libbpf: Teach bpf_object__open to guess program types
Teach bpf_object__open how to guess program type and expected attach
type from section names, similar to what bpf_prog_load() does. This
seems like a really useful features and an oversight to not have this
done during bpf_object_open(). To preserver backwards compatible
behavior of bpf_prog_load(), its attr->prog_type is treated as an
override of bpf_object__open() decisions, if attr->prog_type is not
UNSPECIFIED.

There is a slight difference in behavior for bpf_prog_load().
Previously, if bpf_prog_load() was loading BPF object with more than one
program, first program's guessed program type and expected attach type
would determine corresponding attributes of all the subsequent program
types, even if their sections names suggest otherwise. That seems like
a rather dubious behavior and with this change it will behave more
sanely: each program's type is determined individually, unless they are
forced to uniformity through attr->prog_type.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-5-andriin@fb.com
2019-10-21 14:49:12 +02:00
Andrii Nakryiko
32dff6db29 libbpf: Add uprobe/uretprobe and tp/raw_tp section suffixes
Map uprobe/uretprobe into KPROBE program type. tp/raw_tp are just an
alias for more verbose tracepoint/raw_tracepoint, respectively.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-4-andriin@fb.com
2019-10-21 14:49:12 +02:00
Andrii Nakryiko
f1eead9e3c libbpf: Add bpf_program__get_{type, expected_attach_type) APIs
There are bpf_program__set_type() and
bpf_program__set_expected_attach_type(), but no corresponding getters,
which seems rather incomplete. Fix this.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-3-andriin@fb.com
2019-10-21 14:49:12 +02:00
Andrii Nakryiko
bc3f2956f2 tools: Sync if_link.h
Sync if_link.h into tools/ and get rid of annoying libbpf Makefile warning.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-2-andriin@fb.com
2019-10-21 14:49:12 +02:00
Kefeng Wang
be18010ea2 tools, bpf: Rename pr_warning to pr_warn to align with kernel logging
For kernel logging macros, pr_warning() is completely removed and
replaced by pr_warn(). By using pr_warn() in tools/lib/bpf/ for
symmetry to kernel logging macros, we could eventually drop the
use of pr_warning() in the whole kernel tree.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191021055532.185245-1-wangkefeng.wang@huawei.com
2019-10-21 14:38:41 +02:00
Jakub Sitnicki
ab81e203bc scripts/bpf: Print an error when known types list needs updating
Don't generate a broken bpf_helper_defs.h header if the helper script needs
updating because it doesn't recognize a newly added type. Instead print an
error that explains why the build is failing, clean up the partially
generated header and stop.

v1->v2:
- Switched from temporary file to .DELETE_ON_ERROR.

Fixes: 456a513bb5 ("scripts/bpf: Emit an #error directive known types list needs updating")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191020112344.19395-1-jakub@cloudflare.com
2019-10-20 18:21:21 -07:00
David S. Miller
2f184393e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Several cases of overlapping changes which were for the most
part trivially resolvable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20 10:43:00 -07:00
Linus Torvalds
531e93d114 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
 "I was battling a cold after some recent trips, so quite a bit piled up
  meanwhile, sorry about that.

  Highlights:

   1) Fix fd leak in various bpf selftests, from Brian Vazquez.

   2) Fix crash in xsk when device doesn't support some methods, from
      Magnus Karlsson.

   3) Fix various leaks and use-after-free in rxrpc, from David Howells.

   4) Fix several SKB leaks due to confusion of who owns an SKB and who
      should release it in the llc code. From Eric Biggers.

   5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.

   6) Jumbo packets don't work after resume on r8169, as the BIOS resets
      the chip into non-jumbo mode during suspend. From Heiner Kallweit.

   7) Corrupt L2 header during MPLS push, from Davide Caratti.

   8) Prevent possible infinite loop in tc_ctl_action, from Eric
      Dumazet.

   9) Get register bits right in bcmgenet driver, based upon chip
      version. From Florian Fainelli.

  10) Fix mutex problems in microchip DSA driver, from Marek Vasut.

  11) Cure race between route lookup and invalidation in ipv4, from Wei
      Wang.

  12) Fix performance regression due to false sharing in 'net'
      structure, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
  net: reorder 'struct net' fields to avoid false sharing
  net: dsa: fix switch tree list
  net: ethernet: dwmac-sun8i: show message only when switching to promisc
  net: aquantia: add an error handling in aq_nic_set_multicast_list
  net: netem: correct the parent's backlog when corrupted packet was dropped
  net: netem: fix error path for corrupted GSO frames
  macb: propagate errors when getting optional clocks
  xen/netback: fix error path of xenvif_connect_data()
  net: hns3: fix mis-counting IRQ vector numbers issue
  net: usb: lan78xx: Connect PHY before registering MAC
  vsock/virtio: discard packets if credit is not respected
  vsock/virtio: send a credit update when buffer size is changed
  mlxsw: spectrum_trap: Push Ethernet header before reporting trap
  net: ensure correct skb->tstamp in various fragmenters
  net: bcmgenet: reset 40nm EPHY on energy detect
  net: bcmgenet: soft reset 40nm EPHYs before MAC init
  net: phy: bcm7xxx: define soft_reset for 40nm EPHY
  net: bcmgenet: don't set phydev->link from MAC
  net: Update address for MediaTek ethernet driver in MAINTAINERS
  ipv4: fix race condition between route lookup and invalidation
  ...
2019-10-19 17:09:11 -04:00
John Hubbard
6f24c8d30d mm/gup_benchmark: add a missing "w" to getopt string
Even though gup_benchmark.c has code to handle the -w command-line option,
the "w" is not part of the getopt string.  It looks as if it has been
missing the whole time.

On my machine, this leads naturally to the following predictable result:

  $ sudo ./gup_benchmark -w
  ./gup_benchmark: invalid option -- 'w'

...which is fixed with this commit.

Link: http://lkml.kernel.org/r/20191014184639.1512873-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:32 -04:00
John Fastabend
54b8625cd9 bpf, libbpf: Add kernel version section parsing back
With commit "libbpf: stop enforcing kern_version,..." we removed the
kernel version section parsing in favor of querying for the kernel
using uname() and populating the version using the result of the
query. After this any version sections were simply ignored.

Unfortunately, the world of kernels is not so friendly. I've found some
customized kernels where uname() does not match the in kernel version.
To fix this so programs can load in this environment this patch adds
back parsing the section and if it exists uses the user specified
kernel version to override the uname() result. However, keep most the
kernel uname() discovery bits so users are not required to insert the
version except in these odd cases.

Fixes: 5e61f27070 ("libbpf: stop enforcing kern_version, populate it for users")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157140968634.9073.6407090804163937103.stgit@john-XPS-13-9370
2019-10-18 20:59:10 +02:00
Danielle Ratson
fa57dd728b selftests: mlxsw: Add Spectrum-2 target scale for tc flower scale test
Return the maximum number of tc flower filters that can be offloaded.
Currently, this value corresponds to the number of counters supported by
the driver.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18 10:05:37 -07:00
Danielle Ratson
317ff0bba6 selftests: mlxsw: Add a resource scale test for Spectrum-2
Add resource_scale test suitable for Spectrum-2.

Invoke the mirror_gre test and check that the advertised scale numbers
are indeed supported.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18 10:05:37 -07:00
Danielle Ratson
cb7d2c719c selftests: mlxsw: Add Spectrum-2 mirror-to-gretap target scale test
Like in Spectrum, use the number of analyzers taken from the devlink
command.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18 10:05:37 -07:00
Danielle Ratson
49c65e4ff1 selftests: mlxsw: Generalize the parameters of mirror_gre test
Use the number of analyzers taken from the devlink command, instead of
hard-coded value, in order to make the test more generic.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18 10:05:37 -07:00
Andrii Nakryiko
cb79a4e1b8 selftest/bpf: Remove test_libbpf.sh and test_libbpf_open
test_progs is much more sophisticated superset of tests compared to
test_libbpf.sh and test_libbpf_open. Remove test_libbpf.sh and
test_libbpf_open.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-8-andriin@fb.com
2019-10-17 12:15:08 -07:00
Andrii Nakryiko
5ac93074b5 selftests/bpf: Move test_queue_stack_map.h into progs/ where it belongs
test_queue_stack_map.h is used only from BPF programs. Thus it should be
part of progs/ subdir. An added benefit of moving it there is that new
TEST_RUNNER_DEFINE_RULES macro-rule will properly capture dependency on
this header for all BPF objects and trigger re-build, if it changes.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-7-andriin@fb.com
2019-10-17 12:15:08 -07:00
Andrii Nakryiko
74b5a5968f selftests/bpf: Replace test_progs and test_maps w/ general rule
Define test runner generation meta-rule that codifies dependencies
between test runner, its tests, and its dependent BPF programs. Use that
for defining test_progs and test_maps test-runners. Also additionally define
2 flavors of test_progs:
- alu32, which builds BPF programs with 32-bit registers codegen;
- bpf_gcc, which build BPF programs using GCC, if it supports BPF target.

Overall, this is accomplished through $(eval)'ing a set of generic
rules, which defines Makefile targets dynamically at runtime. See
comments explaining the need for 2 $(evals), though.

For each test runner we have (test_maps and test_progs, currently), and,
optionally, their flavors, the logic of build process is modeled as
follows (using test_progs as an example):
- all BPF objects are in progs/:
  - BPF object's .o file is built into output directory from
    corresponding progs/.c file;
  - all BPF objects in progs/*.c depend on all progs/*.h headers;
  - all BPF objects depend on bpf_*.h helpers from libbpf (but not
    libbpf archive). There is an extra rule to trigger bpf_helper_defs.h
    (re-)build, if it's not present/outdated);
  - build recipe for BPF object can be re-defined per test runner/flavor;
- test files are built from prog_tests/*.c:
  - all such test file objects are built on individual file basis;
  - currently, every single test file depends on all BPF object files;
    this might be improved in follow up patches to do 1-to-1 dependency,
    but allowing to customize this per each individual test;
  - each test runner definition can specify a list of extra .c and .h
    files to be built along test files and test runner binary; all such
    headers are becoming automatic dependency of each test .c file;
  - due to test files sometimes embedding (using .incbin assembly
    directive) contents of some BPF objects at compilation time, which are
    expected to be in CWD of compiler, compilation for test file object does
    cd into test runner's output directory; to support this mode all the
    include paths are turned into absolute paths using $(abspath) make
    function;
- prog_tests/test.h is automatically (re-)generated with an entry for
  each .c file in prog_tests/;
- final test runner binary is linked together from test object files and
  extra object files, linking together libbpf's archive as well;
- it's possible to specify extra "resource" files/targets, which will be
  copied into test runner output directory, if it differes from
  Makefile-wide $(OUTPUT). This is used to ensure btf_dump test cases and
  urandom_read binary is put into a test runner's CWD for tests to find
  them in runtime.

For flavored test runners, their output directory is a subdirectory of
common Makefile-wide $(OUTPUT) directory with flavor name used as
subdirectory name.

BPF objects targets might be reused between different test runners, so
extra checks are employed to not double-define them. Similarly, we have
redefinition guards for output directories and test headers.

test_verifier follows slightly different patterns and is simple enough
to not justify generalizing TEST_RUNNER_DEFINE/TEST_RUNNER_DEFINE_RULES
further to accomodate these differences. Instead, rules for
test_verifier are minimized and simplified, while preserving correctness
of dependencies.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-6-andriin@fb.com
2019-10-17 12:15:08 -07:00
Andrii Nakryiko
03dcb78460 selftests/bpf: Add simple per-test targets to Makefile
Currently it's impossible to do `make test_progs` and have only
test_progs be built, because all the binary targets are defined in terms
of $(OUTPUT)/<binary>, and $(OUTPUT) is absolute path to current
directory (or whatever gets overridden to by user).

This patch adds simple re-directing targets for all test targets making
it possible to do simple and nice `make test_progs` (and any other
target).

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-5-andriin@fb.com
2019-10-17 12:15:08 -07:00
Andrii Nakryiko
ee6c52e92d selftests/bpf: Switch test_maps to test_progs' test.h format
Make test_maps use tests.h header format consistent with the one used by
test_progs, to facilitate unification.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-4-andriin@fb.com
2019-10-17 12:15:08 -07:00
Andrii Nakryiko
d25c5e2355 selftests/bpf: Make CO-RE reloc test impartial to test_progs flavor
test_core_reloc_kernel test captures its own process name and validates
it as part of the test. Given extra "flavors" of test_progs, this break
for anything by default test_progs binary. Fix the test to cut out
flavor part of the process name.

Fixes: ee2eb063d3 ("selftests/bpf: Add BPF_CORE_READ and BPF_CORE_READ_STR_INTO macro tests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-3-andriin@fb.com
2019-10-17 12:15:08 -07:00
Andrii Nakryiko
0b6e71c398 selftests/bpf: Teach test_progs to cd into subdir
We are building a bunch of "flavors" of test_progs, e.g., w/ alu32 flag
for Clang when building BPF object. test_progs setup is relying on
having all the BPF object files and extra resources to be available in
current working directory, though. But we actually build all these files
into a separate sub-directory. Next set of patches establishes
convention of naming "flavored" test_progs (and test runner binaries in
general) as test_progs-flavor (e.g., test_progs-alu32), for each such
extra flavor. This patch teaches test_progs binary to automatically
detect its own extra flavor based on its argv[0], and if present, to
change current directory to a flavor-specific subdirectory.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191016060051.2024182-2-andriin@fb.com
2019-10-17 12:15:08 -07:00
Jakub Sitnicki
8d285a3b2e selftests/bpf: Restore the netns after flow dissector reattach test
flow_dissector_reattach test changes the netns we run in but does not
restore it to the one we started in when finished. This interferes with
tests that run after it. Fix it by restoring the netns when done.

Fixes: f97eea1756 ("selftests/bpf: Check that flow dissector can be re-attached")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191017083752.30999-1-jakub@cloudflare.com
2019-10-17 12:10:16 -07:00
Alexei Starovoitov
580d656d80 selftests/bpf: Add kfree_skb raw_tp test
Load basic cls_bpf program.
Load raw_tracepoint program and attach to kfree_skb raw tracepoint.
Trigger cls_bpf via prog_test_run.
At the end of test_run kernel will call kfree_skb
which will trigger trace_kfree_skb tracepoint.
Which will call our raw_tracepoint program.
Which will take that skb and will dump it into perf ring buffer.
Check that user space received correct packet.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-12-ast@kernel.org
2019-10-17 16:44:36 +02:00
Alexei Starovoitov
a7658e1a41 bpf: Check types of arguments passed into helpers
Introduce new helper that reuses existing skb perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct sk_buff *' as tracepoint argument or
can walk other kernel data structures to skb pointer.

In order to do that teach verifier to resolve true C types
of bpf helpers into in-kernel BTF ids.
The type of kernel pointer passed by raw tracepoint into bpf
program will be tracked by the verifier all the way until
it's passed into helper function.
For example:
kfree_skb() kernel function calls trace_kfree_skb(skb, loc);
bpf programs receives that skb pointer and may eventually
pass it into bpf_skb_output() bpf helper which in-kernel is
implemented via bpf_skb_event_output() kernel function.
Its first argument in the kernel is 'struct sk_buff *'.
The verifier makes sure that types match all the way.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-11-ast@kernel.org
2019-10-17 16:44:36 +02:00
Alexei Starovoitov
f75a697e09 libbpf: Auto-detect btf_id of BTF-based raw_tracepoints
It's a responsiblity of bpf program author to annotate the program
with SEC("tp_btf/name") where "name" is a valid raw tracepoint.
The libbpf will try to find "name" in vmlinux BTF and error out
in case vmlinux BTF is not available or "name" is not found.
If "name" is indeed a valid raw tracepoint then in-kernel BTF
will have "btf_trace_##name" typedef that points to function
prototype of that raw tracepoint. BTF description captures
exact argument the kernel C code is passing into raw tracepoint.
The kernel verifier will check the types while loading bpf program.

libbpf keeps BTF type id in expected_attach_type, but since
kernel ignores this attribute for tracing programs copy it
into attach_btf_id attribute before loading.

Later the kernel will use prog->attach_btf_id to select raw tracepoint
during bpf_raw_tracepoint_open syscall command.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-6-ast@kernel.org
2019-10-17 16:44:35 +02:00
Alexei Starovoitov
ccfe29eb29 bpf: Add attach_btf_id attribute to program load
Add attach_btf_id attribute to prog_load command.
It's similar to existing expected_attach_type attribute which is
used in several cgroup based program types.
Unfortunately expected_attach_type is ignored for
tracing programs and cannot be reused for new purpose.
Hence introduce attach_btf_id to verify bpf programs against
given in-kernel BTF type id at load time.
It is strictly checked to be valid for raw_tp programs only.
In a later patches it will become:
btf_id == 0 semantics of existing raw_tp progs.
btd_id > 0 raw_tp with BTF and additional type safety.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-5-ast@kernel.org
2019-10-17 16:44:35 +02:00
Roman Mashak
4980b2c4fe tc-testing: updated pedit test cases
Added TDC test cases for Ethernet LAYERED_OP operations:
- set single source Ethernet MAC
- set single destination Ethernet MAC
- set single invalid destination Ethernet MAC
- set Ethernet type
- invert source/destination/type fields
- add operation on Ethernet type field

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15 20:35:18 -07:00
Jiri Pirko
5bc60de50d selftests: bpf: Don't try to read files without read permission
Recently couple of files that are write only were added to netdevsim
debugfs. Don't read these files and avoid error.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-15 16:27:25 -07:00
Stanislav Fomichev
95fbda1e37 selftests: bpf: Add selftest for __sk_buff tstamp
Make sure BPF_PROG_TEST_RUN accepts tstamp and exports any
modifications that BPF program does.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191015183125.124413-2-sdf@google.com
2019-10-15 16:24:26 -07:00
Andrii Nakryiko
c7566a6969 selftests/bpf: Add field existence CO-RE relocs tests
Add a bunch of tests validating CO-RE is handling field existence
relocation. Relaxed CO-RE relocation mode is activated for these new
tests to prevent libbpf from rejecting BPF object for no-match
relocation, even though test BPF program is not going to use that
relocation, if field is missing.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-6-andriin@fb.com
2019-10-15 16:06:05 -07:00
Andrii Nakryiko
01340e3191 libbpf: Add BPF-side definitions of supported field relocation kinds
Add enum definition for Clang's __builtin_preserve_field_info()
second argument (info_kind). Currently only byte offset and existence
are supported. Corresponding Clang changes introducing this built-in can
be found at [0]

  [0] https://reviews.llvm.org/D67980

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-5-andriin@fb.com
2019-10-15 16:06:05 -07:00