The union should contain the extended dest and counter list.
Remove the resevered 0x40 bits which is redundant.
This change doesn't break any functionally.
Everything works today because the code in fs_cmd.c is using
the correct structs if extended dest or the basic dest.
Fixes: 1b11549859 ("net/mlx5: Introduce extended destination fields")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
This cycle mainly saw lots of bug fixes and clean up code across the core
code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better with
the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP
-----BEGIN PGP SIGNATURE-----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=zHXW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA subsystem updates from Jason Gunthorpe:
"This cycle mainly saw lots of bug fixes and clean up code across the
core code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better
with the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA: Fix double-free in srq creation error flow
RDMA/efa: Fix incorrect error print
IB/mlx5: Free mpi in mp_slave mode
IB/mlx5: Use the original address for the page during free_pages
RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
RDMA/hns: Package operations of rq inline buffer into separate functions
RDMA/hns: Optimize cmd init and mode selection for hip08
IB/hfi1: Define variables as unsigned long to fix KASAN warning
IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
IB/hfi1: Add traces for TID RDMA READ
RDMA/siw: Relax from kmap_atomic() use in TX path
IB/iser: Support up to 16MB data transfer in a single command
RDMA/siw: Fix page address mapping in TX path
RDMA: Fix goto target to release the allocated memory
RDMA/usnic: Avoid overly large buffers on stack
RDMA/odp: Add missing cast for 32 bit
RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
Documentation/infiniband: update name of some functions
RDMA/cma: Fix false error message
RDMA/hns: Fix wrong assignment of qp_access_flags
...
To resolve dependencies in following patches
mlx5_ib.h conflict resolved by keeing both hunks
Linux 5.3-rc8
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Map capability bit indicating that HCA supports port buffer's congestion
counters. Also map registers with the corresponding counters.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add flow steering actions: modify header and packet reformat
to the fs_cmd shim layer. This allows each namespace to define
possibly different functionality for alloc/dealloc action commands.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Merge mlx5-next patches needed for upcoming mlx5 software steering.
1) Alex adds HW bits and definitions required for SW steering
2) Ariel moves device memory management to mlx5_core (From mlx5_ib)
3) Maor, Cleanups and fixups for eswitch mode and RoCE
4) Mark, Set only stag for match untagged packets
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Return MLX5_ESWITCH_NONE when CONFIG_MLX5_ESWITCH
is not selected.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Move the device memory allocation and deallocation commands
SW ICM memory to mlx5_core to expose this API for all
mlx5_core users.
This comes as preparation for supporting SW steering in kernel
where it will be required to allocate and register device
memory for direct rule insertion.
In addition, an API to register this device memory for future
remote access operations is introduced using the create_mkey
commands.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5 HW spec and bits updates:
1) Aya exposes IP-in-IP capability in mlx5_core.
2) Maxim exposes lag tx port affinity capabilities.
3) Moshe adds VNIC_ENV internal rq counter bits.
4) ODP capabilities for DC transport
Misc updates:
5) Saeed, two compiler warnings cleanups
6) Add XRQ legacy commands opcodes
7) Use refcount_t for refcount
8) fix a -Wstringop-truncation warning
Michael Guralnik says:
====================
The series adds support for on-demand paging for DC transport.
As DC is a mlx-only transport, the capabilities are exposed to the user
using DEVX objects and later on through mlx5dv_query_device.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'mlx5-odp-dc':
IB/mlx5: Add page fault handler for DC initiator WQE
IB/mlx5: Remove check of FW capabilities in ODP page fault handling
net/mlx5: Set ODP capabilities for DC transport to max
In mlx5_core initialization, query max ODP capabilities for DC transport
from FW and set as current capabilities.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Bring in the lastest mlx5-next branch as the RDMA RX RoCE Steering
Support patch series requires it (first two patches are in mlx5-next,
final patch in RDMA tree).
Signed-off-by: Doug Ledford <dledford@redhat.com>
HV VHCA is a layer which provides PF to VF communication channel based on
HyperV PCI config channel. It implements Mellanox's Inter VHCA control
communication protocol. The protocol contains control block in order to
pass messages between the PF and VF drivers, and data blocks in order to
pass actual data.
The infrastructure is agent based. Each agent will be responsible of
contiguous buffer blocks in the VHCA config space. This infrastructure will
bind agents to their blocks, and those agents can only access read/write
the buffer blocks assigned to them. Each agent will provide three
callbacks (control, invalidate, cleanup). Control will be invoked when
block-0 is invalidated with a command that concerns this agent. Invalidate
callback will be invoked if one of the blocks assigned to this agent was
invalidated. Cleanup will be invoked before the agent is being freed in
order to clean all of its open resources or deferred works.
Block-0 serves as the control block. All execution commands from the PF
will be written by the PF over this block. VF will ack on those by
writing on block-0 as well. Its format is described by struct
mlx5_hv_vhca_control_block layout.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use different namespaces for bypass and switchdev loopback because they
have different priorities and default table miss action requirement:
1. bypass: with multiple priorities support, and
MLX5_FLOW_TABLE_MISS_ACTION_DEF as the default table miss action;
2. switchdev loopback: with single priority support, and
MLX5_FLOW_TABLE_MISS_ACTION_SWITCH_DOMAIN as the default table miss
action.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add the lag_tx_port_affinity HCA capability bit that indicates that
setting port affinity of TISes is supported.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Expose Fw indication that it supports Stateless Offloads for IP over IP
tunneled packets. The following offloads are supported for the inner
packets: RSS, RX & TX Checksum Offloads, LSO and Flow Steering.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add mlx5 interface support for reading internal rq out of buffer counter
as part of QUERY_VNIC_ENV command. The command is used by the driver to
query vnic diagnostic statistics from FW.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add two events that were defined in the device specification but were
not exposed in the driver list.
Post this patch those events can be read over the DEVX events interface
once be reported by the firmware.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Edward Srouji <edwards@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190808084358.29517-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add XRQ legacy commands opcodes, will be used via the DEVX interface.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleans up a lot of unneeded code and logic around the debugfs
files, making all of this much simpler and easier to understand as we
don't need to keep the dentries saved anymore.
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mlx5_eswitch_rep stores same hw ID for all representors.
However it is never used from this structure.
It is always used from mlx5_vport.
Hence, remove unused field.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
To remove dependency on rtnl lock, protect mod_hdr hash table from
concurrent modifications with new mutex.
Implement helper function to get flow namespace to prevent code
duplication.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
List of flows attached to mod header entry is used as implicit reference
counter (mod header entry is deallocated when list becomes free) and as a
mechanism to obtain mod header entry that flow is attached to (through list
head). This is not safe when concurrent modification of list of flows
attached to mod header entry is possible. Proper atomic reference counter
is required to support concurrent access.
As a preparation for extending mod header with reference counting, extract
code that lookups and deletes mod header entry into standalone put/get
helpers. In order to remove this dependency on external locking, extend mod
header entry with reference counter to manage its lifetime and extend flow
structure with direct pointer to mod header entry that flow is attached to.
To remove code duplication between legacy and switchdev mode
implementations that both support mod_hdr functionality, store mod_hdr
table in dedicated structure used by both fdb and kernel namespaces. New
table structure is extended with table lock by one of the following patches
in this series. Implement helper function to get correct mod_hdr table
depending on flow namespace.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The TLS progress params context WQE should not include an
Eth segment, drop it.
In addition, align the tls_progress_params layout with the
HW specification document:
- fix the tisn field name.
- remove the valid bit.
Fixes: a12ff35e0f ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the "reserved_at_40" field to match the device specification.
Fixes: 84df61ebc6 ("net/mlx5: Add HW interfaces used by LAG")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add a pool of flow counters, based on flow counter bulks, removing the
need to allocate a new counter via a costly FW command during the flow
creation process. The time it takes to acquire/release a flow counter
is cut from ~50 [us] to ~50 [ns].
The pool is part of the mlx5 driver instance, and provides flow
counters for aging flows. mlx5_fc_create() was modified to provide
counters for aging flows from the pool by default, and
mlx5_destroy_fc() was modified to release counters back to the pool
for later reuse. If bulk allocation is not supported or fails, and for
non-aging flows, the fallback behavior is to allocate and free
individual counters.
The pool is comprised of three lists of flow counter bulks, one of
fully used bulks, one of partially used bulks, and one of unused
bulks. Counters are provided from the partially used bulks first, to
help limit bulk fragmentation.
The pool maintains a threshold, and strives to maintain the amount of
available counters below it. The pool is increased in size when a
counter acquisition request is made and there are no available
counters, and it is decreased in size when the last counter in a bulk
is released and there are more available counters than the threshold.
All pool size changes are done in the context of the
acquiring/releasing process.
The value of the threshold is directly correlated to the amount of
used counters the pool is providing, while constrained by a hard
maximum, and is recalculated every time a bulk is allocated/freed.
This ensures that the pool only consumes large amounts of memory for
available counters if the pool is being used heavily. When fully
populated and at the hard maximum, the buffer of available counters
consumes ~40 [MB].
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Check if firmware supports the requested element type before
attempting to create the element type.
In addition, explicitly specify the request element type and tsar type.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
First reserved field is off by one instead of reserved_at_1 it should be
reserved_at_2, fix that.
Fixes: a12ff35e0f ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add a handle to invoke the new FW capability of allocating a bulk of
flow counters.
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Towards introducing the ability to allocate bulks of flow counters,
refactor the flow counter bulk query process, removing functions and
structs whose names indicated being used for flow counter bulk
allocation FW commands, despite them actually only being used to
support bulk querying, and migrate their functionality to correctly
named functions in their natural location, fs_counters.c.
Additionally, optimize the bulk query process by:
* Extracting the memory used for the query to mlx5_fc_stats so
that it is only allocated once, and not for each bulk query.
* Querying all the counters in one function call.
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch prevents a race between user invoked cached counters
query and a neighbor last usage updater.
The cached flow counter stats can be queried by calling
"mlx5_fc_query_cached" which provides the number of bytes and
packets that passed via this flow since the last time this counter
was queried.
It does so by reducting the last saved stats from the current, cached
stats and then updating the last saved stats with the cached stats.
It also provide the lastuse value for that flow.
Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the
last usage time of encapsulation flows, it calls the flow counter
query method periodically and async to user queries of the flow counter
using cls_flower.
This call is causing the driver to update the last reported bytes and
packets from the cache and therefore, future user queries of the flow
stats will return lower than expected number for bytes and packets
since the last saved stats in the driver was updated async to the last
saved stats in cls_flower.
This causes wrong stats presentation of encapsulation flows to user.
Since the neighbor usage updater only needs the lastuse stats from the
cached counter, the fix is to use a dedicated lastuse query call that
returns the lastuse value without synching between the cached stats and
the last saved stats.
Fixes: f6dfb4c3f2 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fix modify_cq_in alignment to match the device specification.
After this fix the 'cq_umem_valid' field will be in the right offset.
Cc: <stable@vger.kernel.org> # 4.19
Fixes: bd37197554 ("net/mlx5: Update mlx5_ifc with DEVX UID bits")
Signed-off-by: Edward Srouji <edwards@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out of the
drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev
-----BEGIN PGP SIGNATURE-----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=iWcG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out
of the drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
RMDA/siw: Require a 64 bit arch
RDMA/siw: Mark expected switch fall-throughs
RDMA/core: Fix -Wunused-const-variable warnings
rdma/siw: Remove set but not used variable 's'
rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
RDMA/siw: Add missing rtnl_lock around access to ifa
rdma/siw: Use proper enumerated type in map_cqe_status
RDMA/siw: Remove unnecessary kthread create/destroy printouts
IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
RDMA/core: Fix race when resolving IP address
RDMA/core: Make rdma_counter.h compile stand alone
IB/core: Work on the caller socket net namespace in nldev_newlink()
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
RDMA/mlx5: Set RDMA DIM to be enabled by default
RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
RDMA/core: Provide RDMA DIM support for ULPs
linux/dim: Implement RDMA adaptive moderation (DIM)
IB/mlx5: Report correctly tag matching rendezvous capability
docs: infiniband: add it to the driver-api bookset
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl0ng7AACgkQSD+KveBX
+j41FQgAjcUgjCiq6gmwI62EsMpZjgjwKhGfYz56jwSmNDgG7Ltj9o/K/+b+oL3u
ZVPO9YgNstWuoPyApE12MzsA+kx/ydRz8GW6IrI5v71JK3yy8Mw/HrYVyUKEnzH4
BVnSRnvHgvCnjZ3SjmUb6Xs74vmoxti9cYr0w0XtBogzuXlfpSYILYFiqrkks6sH
VEmD9P3dTBNQUviYwkRcHhJoI7NqdQBApn9/30F4dQsmnUsikoaom5GovrbBw817
L3Q+U/9+2Xp5k1i7J2MLFSL6Vyaxs/48eRKxs3YubBmrtwBjPj+aOYdRdDOscguQ
WcDRiYPOW72cGIlFtYyuzApqo+J+xw==
=mq0x
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2019-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-07-11
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.15
('net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn')
For -stable v5.1
('net/mlx5e: Fix port tunnel GRE entropy control')
('net/mlx5e: Rx, Fix checksum calculation for new hardware')
('net/mlx5e: Fix return value from timeout recover function')
('net/mlx5e: Fix error flow in tx reporter diagnose')
For -stable v5.2
('net/mlx5: E-Switch, Fix default encap mode')
Conflict note: This pull request will produce a small conflict when
merged with net-next.
In drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
Take the hunk from net and replace:
esw_offloads_steering_init(esw, vf_nvports, total_nvports);
with:
esw_offloads_steering_init(esw);
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
CQE checksum full mode in new HW, provides a full checksum of rx frame.
Covering bytes starting from eth protocol up to last byte in the received
frame (frame_size - ETH_HLEN), as expected by the stack.
Fixing up skb->csum by the driver is not required in such case. This fix
is to avoid wrong checksum calculation in drivers which already support
the new hardware with the new checksum mode.
Fixes: 85327a9c41 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Max Gurtovoy says:
====================
Those two patches introduce VHCA tunnel mechanism to DEVX interface
needed for Bluefield SOC. See extensive commit messages for more
information.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'vcha-tunnel':
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
net/mlx5: Introduce VHCA tunnel device capability
When using the device emulation feature (introduced in Bluefield-1 SOC),
a privileged function (the device emulation manager) will be able to
create a channel to execute commands on behalf of the emulated function.
This channel will be a general object of type VHCA_TUNNEL that will have
a unique ID for each emulated function. This ID will be passed in each
cmd that will be issued by the emulation SW in a well known offset in
the command header.
This channel is needed since the emulated function doesn't have a normal
command interface to the HCA HW, but some basic configuration for that
function is needed (e.g. initialize and enable the HCA). For that matter,
a specific command-set was defined and only those commands will be issued
by the HCA.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Always contain all acceleration functions declarations in
'accel' files, independent to the flags setting.
For this, introduce new flags CONFIG_FPGA_{IPSEC/TLS} and use stubs
where needed.
This obsoletes the need for stubs in 'fpga' files. Remove them.
Also use the new flags in Makefile, to decide whether to compile
TLS-specific or IPSEC-specific objects, or not.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support bind a qp with counter. If counter is null then bind the qp to the
default counter. Different QP state has different operation:
- RESET: Set the counter field so that it will take effective during
RST2INIT change;
- RTS: Issue an RTS2RTS change to update the QP counter;
- Other: Set the counter field and mark the counter_pending flag, when QP
is moved to RTS state and this flag is set, then issue an RTS2RTS
modification to update the counter.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in the next patches.
* mlx5-next:
net/mlx5: Add rts2rts_qp_counters_set_id field in hca cap
net/mlx5: Properly name the generic WQE control field
net/mlx5: Introduce TLS TX offload hardware bits and structures
net/mlx5: Refactor mlx5_esw_query_functions for modularity
net/mlx5: E-Switch prepare functions change handler to be modular
net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()
Misc updates from mlx5-next branch:
1) Add the required HW definitions and structures for upcoming TLS
support.
2) Add support for MCQI and MCQS hardware registers for fw version query.
3) Added hardware bits and structures definitions for sub-functions
4) Small code cleanup and improvement for PF pci driver.
5) Bluefield (ECPF) updates and refactoring for better E-Switch
management on ECPF embedded CPU NIC:
5.1) Consolidate querying eswitch number of VFs
5.2) Register event handler at the correct E-Switch init stage
5.3) Setup PF's inline mode and vlan pop when the ECPF is the
E-Swtich manager ( the host PF is basically a VF ).
5.4) Handle Vport UC address changes in switchdev mode.
6) Cleanup the rep and netdev reference when unloading IB rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
i# All conflicts fixed but you are still merging.
Add rts2rts_qp_counters_set_id field in hca cap so that RTS2RTS
qp modification can be used to change the counter of a QP.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
