Libudev relies on having a subsystem link for non-root devices. To
avoid libudev (and potentially other userspace tools) choking on the
matrix device let us introduce a matrix bus and with it the matrix
bus subsytem. Also make the matrix device reside within the matrix
bus.
Doing this we remove the forced link from the matrix device to the
vfio_ap driver and the device_type we do not need anymore.
Since the associated matrix driver is not the vfio_ap driver any more,
we have to change the search for the devices on the vfio_ap driver in
the function vfio_ap_verify_queue_reserved.
Fixes: 1fde573413 ("s390: vfio-ap: base implementation of VFIO AP device driver")
Cc: stable@vger.kernel.org
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
no functional change, just hygiene.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
We replace the vfio_ap_mdev_copy_masks() by the new
kvm_arch_crypto_set_masks() to be able to use the standard
KVM tracing system.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <1538728270-10340-3-git-send-email-pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implements the VFIO_DEVICE_RESET ioctl. This ioctl zeroizes
all of the AP queues assigned to the guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-15-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's call PAPQ(ZAPQ) to zeroize a queue for each queue configured
for a mediated matrix device when it is released.
Zeroizing a queue resets the queue, clears all pending
messages for the queue entries and disables adapter interruptions
associated with the queue.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-14-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Adds support for the VFIO_DEVICE_GET_INFO ioctl to the VFIO
AP Matrix device driver. This is a minimal implementation,
as vfio-ap does not use I/O regions.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-13-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implements the open callback on the mediated matrix device.
The function registers a group notifier to receive notification
of the VFIO_GROUP_NOTIFY_SET_KVM event. When notified,
the vfio_ap device driver will get access to the guest's
kvm structure. The open callback must ensure that only one
mediated device shall be opened per guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-12-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Provides a sysfs interface to view the AP matrix configured for the
mediated matrix device.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. matrix
To view the matrix configured for the mediated matrix device,
print the matrix file:
cat matrix
Below are examples of the output from the above command:
Example 1: Adapters and domains assigned
Assignments:
Adapters 5 and 6
Domains 4 and 71 (0x47)
Output
05.0004
05.0047
06.0004
06.0047
Examples 2: Only adapters assigned
Assignments:
Adapters 5 and 6
Output:
05.
06.
Examples 3: Only domains assigned
Assignments:
Domains 4 and 71 (0x47)
Output:
.0004
.0047
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-10-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Provides the sysfs interfaces for:
1. Assigning AP control domains to the mediated matrix device
2. Unassigning AP control domains from a mediated matrix device
3. Displaying the control domains assigned to a mediated matrix
device
The IDs of the AP control domains assigned to the mediated matrix
device are stored in an AP domain mask (ADM). The bits in the ADM,
from most significant to least significant bit, correspond to
AP domain numbers 0 to 255. On some systems, the maximum allowable
domain number may be less than 255 - depending upon the host's
AP configuration - and assignment may be rejected if the input
domain ID exceeds the limit.
When a control domain is assigned, the bit corresponding its domain
ID will be set in the ADM. Likewise, when a domain is unassigned,
the bit corresponding to its domain ID will be cleared in the ADM.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. assign_control_domain
.................. unassign_control_domain
To assign a control domain to the $uuid mediated matrix device's
ADM, write its domain number to the assign_control_domain file.
To unassign a domain, write its domain number to the
unassign_control_domain file. The domain number is specified
using conventional semantics: If it begins with 0x the number
will be parsed as a hexadecimal (case insensitive) number;
if it begins with 0, it is parsed as an octal number;
otherwise, it will be parsed as a decimal number.
For example, to assign control domain 173 (0xad) to the mediated
matrix device $uuid:
echo 173 > assign_control_domain
or
echo 0255 > assign_control_domain
or
echo 0xad > assign_control_domain
To unassign control domain 173 (0xad):
echo 173 > unassign_control_domain
or
echo 0255 > unassign_control_domain
or
echo 0xad > unassign_control_domain
The assignment will be rejected if the APQI exceeds the maximum
value for an AP domain:
* If the AP Extended Addressing (APXA) facility is installed,
the max value is 255
* Else the max value is 15
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduces two new sysfs attributes for the VFIO mediated
matrix device for assigning AP domains to and unassigning
AP domains from a mediated matrix device. The IDs of the
AP domains assigned to the mediated matrix device will be
stored in an AP queue mask (AQM).
The bits in the AQM, from most significant to least
significant bit, correspond to AP queue index (APQI) 0 to
255 (note that an APQI is synonymous with with a domain ID).
On some systems, the maximum allowable domain number may be
less than 255 - depending upon the host's AP configuration -
and assignment may be rejected if the input domain ID exceeds
the limit.
When a domain is assigned, the bit corresponding to the APQI
will be set in the AQM. Likewise, when a domain is unassigned,
the bit corresponding to the APQI will be cleared from the AQM.
In order to successfully assign a domain, the APQNs derived from
the domain ID being assigned and the adapter numbers of all
adapters previously assigned:
1. Must be bound to the vfio_ap device driver.
2. Must not be assigned to any other mediated matrix device.
If there are no adapters assigned to the mdev, then there must
be an AP queue bound to the vfio_ap device driver with an
APQN containing the domain ID (i.e., APQI), otherwise all
adapters subsequently assigned will fail because there will be no
AP queues bound with an APQN containing the APQI.
Assigning or un-assigning an AP domain will also be rejected if
a guest using the mediated matrix device is running.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. assign_domain
.................. unassign_domain
To assign a domain to the $uuid mediated matrix device,
write the domain's ID to the assign_domain file. To
unassign a domain, write the domain's ID to the
unassign_domain file. The ID is specified using
conventional semantics: If it begins with 0x, the number
will be parsed as a hexadecimal (case insensitive) number;
if it begins with 0, it will be parsed as an octal number;
otherwise, it will be parsed as a decimal number.
For example, to assign domain 173 (0xad) to the mediated matrix
device $uuid:
echo 173 > assign_domain
or
echo 0255 > assign_domain
or
echo 0xad > assign_domain
To unassign domain 173 (0xad):
echo 173 > unassign_domain
or
echo 0255 > unassign_domain
or
echo 0xad > unassign_domain
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduces two new sysfs attributes for the VFIO mediated
matrix device for assigning AP adapters to and unassigning
AP adapters from a mediated matrix device. The IDs of the
AP adapters assigned to the mediated matrix device will be
stored in an AP mask (APM).
The bits in the APM, from most significant to least significant
bit, correspond to AP adapter IDs (APID) 0 to 255. On
some systems, the maximum allowable adapter number may be less
than 255 - depending upon the host's AP configuration - and
assignment may be rejected if the input adapter ID exceeds the
limit.
When an adapter is assigned, the bit corresponding to the APID
will be set in the APM. Likewise, when an adapter is
unassigned, the bit corresponding to the APID will be cleared
from the APM.
In order to successfully assign an adapter, the APQNs derived from
the adapter ID being assigned and the queue indexes of all domains
previously assigned:
1. Must be bound to the vfio_ap device driver.
2. Must not be assigned to any other mediated matrix device
If there are no domains assigned to the mdev, then there must
be an AP queue bound to the vfio_ap device driver with an
APQN containing the APID, otherwise all domains
subsequently assigned will fail because there will be no
AP queues bound with an APQN containing the adapter ID.
Assigning or un-assigning an AP adapter will be rejected if
a guest using the mediated matrix device is running.
The relevant sysfs structures are:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
...............[$uuid]
.................. assign_adapter
.................. unassign_adapter
To assign an adapter to the $uuid mediated matrix device's APM,
write the APID to the assign_adapter file. To unassign an adapter,
write the APID to the unassign_adapter file. The APID is specified
using conventional semantics: If it begins with 0x the number will
be parsed as a hexadecimal number; if it begins with a 0 the number
will be parsed as an octal number; otherwise, it will be parsed as a
decimal number.
For example, to assign adapter 173 (0xad) to the mediated matrix
device $uuid:
echo 173 > assign_adapter
or
echo 0xad > assign_adapter
or
echo 0255 > assign_adapter
To unassign adapter 173 (0xad):
echo 173 > unassign_adapter
or
echo 0xad > unassign_adapter
or
echo 0255 > unassign_adapter
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Registers the matrix device created by the VFIO AP device
driver with the VFIO mediated device framework.
Registering the matrix device will create the sysfs
structures needed to create mediated matrix devices
each of which will be used to configure the AP matrix
for a guest and connect it to the VFIO AP device driver.
Registering the matrix device with the VFIO mediated device
framework will create the following sysfs structures:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ create
To create a mediated device for the AP matrix device, write a UUID
to the create file:
uuidgen > create
A symbolic link to the mediated device's directory will be created in the
devices subdirectory named after the generated $uuid:
/sys/devices/vfio_ap/matrix/
...... [mdev_supported_types]
......... [vfio_ap-passthrough]
............ [devices]
............... [$uuid]
A symbolic link to the mediated device will also be created
in the vfio_ap matrix's directory:
/sys/devices/vfio_ap/matrix/[$uuid]
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20180925231641.4954-6-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
