This is the first cut of atomic helper code. As-is it's only useful to
implement a pure atomic interface for plane updates.
Later patches will integrate this with the crtc helpers so that full
atomic updates are possible. We also need a pile of helpers to aid
drivers in transitioning from the legacy world to the shiny new atomic
age. Finally we need helpers to implement legacy ioctls on top of the
atomic interface.
The design of the overall helpers<->driver interaction is fairly
simple, but has an unfortunate large interface:
- We have ->atomic_check callbacks for crtcs and planes. The idea is
that connectors don't need any checking, and if they do they can
adjust the relevant crtc driver-private state. So no connector hooks
should be needed. Also the crtc helpers integration will do the
->best_encoder checks, so no need for that.
- Framebuffer pinning needs to be done before we can commit to the hw
state. This is especially important for async updates where we must
pin all buffers before returning to userspace, so that really only
hw failures can happen in the asynchronous worker.
Hence we add ->prepare_fb and ->cleanup_fb hooks for this resources
management.
- The actual atomic plane commit can't fail (except hw woes), so has
void return type. It has three stages:
1. Prepare all affected crtcs with crtc->atomic_begin. Drivers can
use this to unset the GO bit or similar latches to prevent plane
updates.
2. Update plane state by looping over all changed planes and calling
plane->atomic_update. Presuming the hardware is sane and has GO
bits drivers can simply bash the state into the hardware in this
function. Other drivers might use this to precompute hw state for
the final step.
3. Finally latch the update for the next vblank with
crtc->atomic_flush. Note that this function doesn't need to wait
for the vblank to happen even for the synchronous case.
v2: Clear drm_<obj>_state->state to NULL when swapping in state.
v3: Add TODO that we don't short-circuit plane updates for now. Likely
no one will care.
v4: Squash in a bit of polish that somehow landed in the wrong (later)
patche.
v5: Integrate atomic functions into the drm docbook and fixup the
kerneldoc.
v6: Fixup fixup patch squashing fumble.
v7: Don't touch the legacy plane state plane->fb and plane->crtc. This
is only used by the legacy ioctl code in the drm core, and that code
already takes care of updating the pointers in all relevant cases.
This is in stark contrast to connector->encoder->crtc links on the
modeset side, which we still need to set since the core doesn't touch
them.
Also some more kerneldoc polish.
v8: Drop outdated comment.
v9: Handle the state->state pointer correctly: Only clearing the
->state pointer when assigning the state to the kms object isn't good
enough. We also need to re-link the swapped out state into the
drm_atomic_state structure.
v10: Shuffle the misplaced docbook template hunk around that Sean spotted.
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some differences compared to Rob's patches again:
- Dropped the committed and checked booleans. Checking will be
internally enforced by always calling ->atomic_check before
->atomic_commit. And async handling needs to be solved differently
because the current scheme completely side-steps ww mutex deadlock
avoidance (and so either reinvents a new deadlock avoidance wheel or
like the current code just deadlocks).
- State for connectors needed to be added, since now they have a
full-blown drm_connector_state (so that drivers have something to
attach their own stuff to).
- Refcounting is gone. I plane to solve async updates differently,
since the lock-passing scheme doesn't cut it (since it abuses ww
mutexes). Essentially what we need for async is a simple ownership
transfer from the caller to the driver. That doesn't need full-blown
refcounting.
- The acquire ctx is a pointer. Real atomic callers should have that
on their stack, legacy entry points need to put the right one
(obtained by drm_modeset_legacy_acuire_ctx) in there.
- I've dropped all hooks except check/commit. All the begin/end
handling is done by core functions and is the same.
- commit/check are just thin wrappers that ensure that ->check is
always called.
- To help out with locking in the legacy implementations I've added a
helper to just grab all locks in the backoff case.
v2: Add notices that check/commit can fail with EDEADLK.
v3:
- More consistent naming for state_alloc.
- Add state_clear which is needed for backoff and retry.
v4: Planes/connectors can switch between crtcs, and we need to be
careful that we grab the state (and locks) for both the old and new
crtc. Improve the interface functions to ensure this.
v5: Add functions to grab affected connectors for a crtc and to recompute
the crtc->enable state. This is useful for both helper and atomic ioctl
code when e.g. removing a connector.
v6: Squash in fixup from Fengguang to use ERR_CAST.
v7: Add debug output.
v8: Make checkpatch happy about kcalloc argument ordering.
v9: Improve kerneldoc in drm_crtc.h
v10:
- Fix another kcalloc argument misorder I've missed.
- More polish for kerneldoc.
v11: Clarify the ownership rules for the state object. The new rule is
that a successful drm_atomic_commit (whether synchronous or asnyc)
always inherits the state and is responsible for the clean-up. That
way async and sync ->commit functions are more similar.
v12: A few bugfixes:
- Assign state->state pointers correctly when grabbing state objects -
we need to link them up with the global state.
- Handle a NULL crtc in set_crtc_for_plane to simplify code flow a bit
for the callers of this function.
v13: Review from Sean:
- kerneldoc spelling fixes
- Don't overallocate states->planes.
- Handle NULL crtc in set_crtc_for_connector.
v14: Sprinkle __must_check over all functions which do wait/wound
locking to make sure callers don't forget this. Since I have ;-)
v15: Be more explicit in the kerneldoc when functions can return
-EDEADLK what to do. And that every other -errno is fatal.
v16: Indent with tabs instead of space, spotted by Ander.
v17: Review from Thierry, small kerneldoc and other naming polish.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Heavily based upon Rob Clark's atomic series.
- Dropped the connector state from the crtc state, instead opting for a
full-blown connector state. The only thing it has is the desired
crtc, but drivers which have connector properties have now a
data-structure to subclass.
- Rename create_state to duplicate_state. Especially for legacy ioctls
we want updates on top of existing state, so we need a way to get at
the current state. We need to be careful to clear the backpointers
to the global state correctly though.
- Drop property values. Drivers with properties simply need to
subclass the datastructures and track the decoded values in there. I
also think that common properties (like rotation) should be decoded
and stored in the core structures.
- Create a new set of ->atomic_set_prop functions, for smoother
transitions from legacy to atomic operations.
- Pass the ->atomic_set_prop ioctl the right structure to avoid
chasing pointers in drivers.
- Drop temporary boolean state for now until we resurrect them with
the helper functions.
- Drop invert_dimensions. For now we don't need any checking since
that's done by the higher-level legacy ioctls. But even then we
should also add rotation/flip tracking to the core drm_crtc_state,
not just whether the dimensions are inverted.
- Track crtc state with an enable/disable. That's equivalent to
mode_valid, but a bit clearer that it means the entire crtc.
The global interface will follow in subsequent patches.
v2: We need to allow drivers to somehow set up the initial state and
clear it on resume. So add a plane->reset callback for that. Helpers
will be provided with default behaviour for all these.
v3: Split out the plane->reset into a separate patch.
v4: Improve kerneldoc in drm_crtc.h
v5: Remove unused inline functions for handling state objects, those
callbacks are now mandatory for full atomic support.
v6: Fix commit message nit Sean noticed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've tried to cc all the people who have recently added new stuff
but forgotten to update documentation.
I've also decided not to bother documenting the massive property list
in struct drm_mode_config. If that beast keeps on growing we might want
to extract it into a separate structure which we won't document.
Cc: Thomas Wood <thomas.wood@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
While writing atomic docs I've noticed that I don't get any errors
for my screw-ups in drm_crtc.h. Fix this immediately.
This just does the bare minimum to get starts, lots of stuff isn't
properly documented yet unfortunately.
v2: Fix adjacent spelling error Sean noticed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just a bit of OCD cleanup on headers - this function isn't the core
interface any more but just a helper for drivers who haven't yet
transitioned to universal planes. Put the declaration at the right
spot and sprinkle necessary #includes over all drivers.
Maybe this helps to encourage driver maintainers to do the switch.
v2: Fix #include ordering for tegra, reported by 0-day builder.
v3: Include required headers, reported by Thierry.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Including headers somewhere else but at the top is ugly, deprecated and
was used in early days only to speed up compile-times. Those days are
over. Make headers independent and then move the inclusions to the top.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-intel-next-2014-08-22:
- basic code for execlist, which is the fancy new cmd submission on gen8. Still
disabled by default (Ben, Oscar Mateo, Thomas Daniel et al)
- remove the useless usage of console_lock for I915_FBDEV=n (Chris)
- clean up relations between ctx and ppgtt
- clean up ppgtt lifetime handling (Michel Thierry)
- various cursor code improvements from Ville
- execbuffer code cleanups and secure batch fixes (Chris)
- prep work for dev -> dev_priv transition (Chris)
- some of the prep patches for the seqno -> request object transition (Chris)
- various small improvements all over
* tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel: (86 commits)
drm/i915: fix suspend/resume for GENs w/o runtime PM support
drm/i915: Update DRIVER_DATE to 20140822
drm: fix plane rotation when restoring fbdev configuration
drm/i915/bdw: Disable execlists by default
drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists)
drm/i915/bdw: Document Logical Rings, LR contexts and Execlists
drm/i915/bdw: Print context state in debugfs
drm/i915/bdw: Display context backing obj & ringbuffer info in debugfs
drm/i915/bdw: Display execlists info in debugfs
drm/i915/bdw: Disable semaphores for Execlists
drm/i915/bdw: Make sure gpu reset still works with Execlists
drm/i915/bdw: Don't write PDP in the legacy way when using LRCs
drm/i915: Track cursor changes as frontbuffer tracking flushes
drm/i915/bdw: Help out the ctx switch interrupt handler
drm/i915/bdw: Avoid non-lite-restore preemptions
drm/i915/bdw: Handle context switch events
drm/i915/bdw: Two-stage execlist submit process
drm/i915/bdw: Write the tail pointer, LRC style
drm/i915/bdw: Implement context switching (somewhat)
drm/i915/bdw: Emission of requests with logical rings
...
Conflicts:
drivers/gpu/drm/i915/i915_drv.c
- Setting dp M2/N2 values plus state checker support (Vandana Kannan)
- chv power well support (Ville)
- DP training pattern 3 support for chv (Ville)
- cleanup of the hsw/bdw ddi pll code, prep work for skl (Damien)
- dsi video burst mode support (Shobhit)
- piles of other chv fixes all over (Ville et. al.)
- cleanup of the ddi translation tables setup code (Damien)
- 180 deg rotation support (Ville & Sonika Jindal)
* tag 'drm-intel-next-2014-08-08' of git://anongit.freedesktop.org/drm-intel: (59 commits)
drm/i915: Update DRIVER_DATE to 20140808
drm/i915: No busy-loop wait_for in the ring init code
drm/i915: Add sprite watermark programming for VLV and CHV
drm/i915: Round-up clock and limit drain latency
drm/i915: Generalize drain latency computation
drm/i915: Free pending page flip events at .preclose()
drm/i915: clean up PPGTT checking logic
drm/i915: Polish the chv cmnlane resrt macros
drm/i915: Hack to tie both common lanes together on chv
drm/i915: Add cherryview_update_wm()
drm/i915: Update DDL only for current CRTC
drm/i915: Parametrize VLV_DDL registers
drm/i915: Fill out the FWx watermark register defines
drm: Resetting rotation property
drm/i915: Add rotation property for sprites
drm: Add rotation_property to mode_config
drm/i915: Make intel_plane_restore() return an error
drm/i915: Add 180 degree sprite rotation support
drm/i915: Introduce a for_each_intel_encoder() macro
drm/i915: Demote the DRRS messages to debug messages
...
Make sure plane rotation is reset correctly when restoring the fbdev
configuration by using drm_mode_plane_set_obj_prop which calls the
driver's set_property callback.
The rotation reset feature was introduced in commit 9783de2 (drm:
Resetting rotation property) and the callback issue was originally
addressed in a previous version of the patch, but the fix was not
present in the final version.
v2: Fix documentation warning
Add some more details to the commit message (Daniel Vetter)
Testcase: igt/kms_rotation_crc
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82236
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In general having this can't hurt, and the atomic helpers will need
it to be able to reset the state objects properly. The overall idea
is to reset in the order pixels flow, so planes -> crtcs ->
encoders -> connectors.
v2: Squash in fixup from Ville to correctly deference struct drm_plane
instead of drm_crtc when walking the plane list. Fixes an oops in
driver init and resume.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Atomic implemenations for legacy ioctls must be able to drop locks.
Which doesn't cause havoc since we only do that while constructing
the new state, so no driver or hardware state change has happened.
The only troubling bit is the fb refcounting the core does - if
someone else has snuck in then it might potentially unref an
outdated framebuffer. To fix that move the old_fb temporary storage
into struct drm_plane for all ioctls, so that the atomic helpers can
update it.
v2: Fix up the error case handling as suggested by Matt Roper and just
grab locks uncoditionally - there's no point in optimizing the locking
for when userspace gets it wrong.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So drivers using the atomic interfaces expect that they can acquire
additional locks internal to the driver as-needed. Examples would be
locks to protect shared state like shared display PLLs.
Unfortunately the legacy ioctls assume that all locking is fully done
by the drm core. Now for those paths which grab all locks we already
have to keep around an acquire context in dev->mode_config. Helper
functions that implement legacy interfaces in terms of atomic support
can therefore grab this acquire contexts and reuse it.
The only interfaces left are the cursor and pageflip ioctls. So add
functions to grab the crtc lock these need using an acquire context
and preserve it for atomic drivers to reuse.
v2:
- Fixup comments&kerneldoc.
- Drop the WARNING from modeset_lock_all_crtcs since that can be used
in legacy paths with crtc locking.
v3: Fix a type on the kerneldoc Dave spotted.
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Somehow we've forgotten about this little bit of OCD.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the atomic state we'll have an array of states for crtcs, planes
and connectors and need to be able to at them by their index. We
already have a drm_crtc_index function so add the missing ones for
planes and connectors.
If it later on turns out that the list walking is too expensive we can
add the index to the relevant modeset objects.
Rob Clark doesn't like the loops too much, but we can always add an
obj->idx parameter later on. And for now reiterating is actually safer
since nowadays we have hotpluggable connectors (thanks to DP MST).
v2: Fix embarrassing copypasta fail in kerneldoc and header
declarations, spotted by Matt Roper.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915.ko has a custom fbdev initialisation routine that aims to preserve
the current mode set by the BIOS, unless overruled by the user. The
user's wishes are determined by what, if any, mode is specified on the
command line (via the video= parameter). However, that command line mode
is first parsed by drm_fb_helper_initial_config() which is called after
i915.ko's custom initial_config() as a fallback method. So in order for
us to honour it, we need to move the cmdline parser earlier. If we
perform the connector cmdline parsing as soon as we initialise the
connector, that cmdline mode and forced status is then available even if
the fbdev helper is not compiled in or never called.
We also then expose the cmdline user mode in the connector mode lists.
v2: Rebase after connector->name upheaval.
v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely
simplifies things while at that.
v4: Fix checkpatch.
v5: Select FB_CMDLINE to adapt to the changed fbdev patch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Cc: dri-devel@lists.freedesktop.org
Cc: Julia Lemire <jlemire@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull in drm-next with Dave's DP MST support so that I can merge some
conflicting patches which also touch the driver load sequencing around
interrupt handling.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Added a property to enable user space to set aspect ratio.
This patch contains declaration of the property and code to create the
property.
v2: Thierry's review comments.
- Made aspect ratio enum generic instead of HDMI/CEA specfic
- Removed usage of temporary aspect_ratio variable
v3: Thierry's review comments.
- Fixed indentation
v4: Thierry's review comments.
- Return ENOMEM when property creation fails
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: register crtc with port
drm/armada: permit CRTCs to be registered as separate devices
dt-bindings: add Marvell Dove LCD controller documentation
drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock
drm/armada: convert to componentized support
drm: add of_graph endpoint helper to find possible CRTCs
component: fix bug with legacy API
drm/armada: make variant a CRTC thing
drm/armada: move variant initialisation to CRTC init
drm/armada: use number of CRTCs registered
drm/armada: move IRQ handling into CRTC
component: add support for component match array
component: ignore multiple additions of the same component
component: fix missed cleanup in case of devres failure
drm_rotation_simplify() can be used to eliminate unsupported rotation
flags. It will check if any unsupported flags are present, and if so
it will modify the rotation to an alternate form by adding 180 degrees
to rotation angle, and flipping the reflect x and y bits. The hope is
that this identity transform will eliminate the unsupported flags.
Of course that might not result in any more supported rotation, so
the caller is still responsible for checking the result afterwards.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a function to create a standards compliant rotation property.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_property_create_bitmask() a bit more generic by allowing the
caller to specify which bits are in fact supported. This allows multiple
callers to use the same enum list, but still create different versions
of the same property with different list of supported bits.
v2: Populate values[] array as non-sparse
Make supported_bits 64bit
Fix up omapdrm call site (Rob)
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The rotation property stuff should be standardized among all drivers.
Move the bits to drm_crtc.h from omap_drv.h.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a helper to allow encoders to find their possible CRTCs from the
OF graph without having to re-implement this functionality. We add a
device_node to drm_crtc which corresponds with the port node in the
DT description of the CRTC device.
We can then scan the DRM device list for CRTCs to find their index,
matching the appropriate CRTC using the port device_node, thus building
up the possible CRTC mask.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- Accurate frontbuffer tracking and frontbuffer rendering invalidate, flush and
flip events. This is prep work for proper PSR support and should also be
useful for DRRS&fbc.
- Runtime suspend hardware on system suspend to support the new SOix sleep
states, from Jesse.
- PSR updates for broadwell (Rodrigo)
- Universal plane support for cursors (Matt Roper), including core drm patches.
- Prefault gtt mappings (Chris)
- baytrail write-enable pte bit support (Akash Goel)
- mmio based flips (Sourab Gupta) instead of blitter ring flips
- interrupt handling race fixes (Oscar Mateo)
And old, not yet merged features from the previous round:
- rps/turbo support for chv (Deepak)
- some other straggling chv patches (Ville)
- proper universal plane conversion for the primary plane (Matt Roper)
- ppgtt on vlv from Jesse
- pile of cleanups, little fixes for insane corner cases and improved debug
support all over
* tag 'drm-intel-next-2014-06-20' of git://anongit.freedesktop.org/drm-intel: (99 commits)
drm/i915: Update DRIVER_DATE to 20140620
drivers/i915: Fix unnoticed failure of init_ring_common()
drm/i915: Track frontbuffer invalidation/flushing
drm/i915: Use new frontbuffer bits to increase pll clock
drm/i915: don't take runtime PM reference around freeze/thaw
drm/i915: use runtime irq suspend/resume in freeze/thaw
drm/i915: Properly track domain of the fbcon fb
drm/i915: Print obj->frontbuffer_bits in debugfs output
drm/i915: Introduce accurate frontbuffer tracking
drm/i915: Drop schedule_back from psr_exit
drm/i915: Ditch intel_edp_psr_update
drm/i915: Drop unecessary complexity from psr_inactivate
drm/i915: Remove ctx->last_ring
drm/i915/chv: Ack interrupts before handling them (CHV)
drm/i915/bdw: Ack interrupts before handling them (GEN8)
drm/i915/vlv: Ack interrupts before handling them (VLV)
drm/i915: Ack interrupts before handling them (GEN5 - GEN7)
drm/i915: Don't BUG_ON in i915_gem_obj_offset
drm/i915: Grab dev->struct_mutex in i915_gem_pageflip_info
drm/i915: Add some L3 registers to the parser whitelist
...
Conflicts:
drivers/gpu/drm/i915/i915_drv.c
This property will be used by the MST code to provide userspace
with a path to parse so it can recognise connectors around hotplugs.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This can be called to update things after dynamic connectors/encoders
are created/deleted.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add a file to debugfs for each connector to allow the EDID to be
overridden.
v2: Copy ubuf before accessing it and reject invalid length data. (David
Herrmann)
Ensure override_edid is reset when a new EDID value is written.
(David Herrmann)
Fix the debugfs file permissions. (David Herrmann)
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a file to debugfs for each connector to enable modification of the
"force" connector attribute. This allows connectors to be enabled or
disabled for testing and debugging purposes.
v2: Add stricter value checking and clean up debugfs_entry if file
creation fails in drm_debugfs_connector_add. (David Herrmann)
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Introduce generic functions to register and unregister connectors. This
provides a common place to add and remove associated user space
interfaces.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Universal plane support had placeholders for cursor planes, but didn't
actually do anything with them. Save the cursor plane reference inside
the crtc and update the cursor plane parameter from void* to drm_plane.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If drivers support universal planes and have registered a cursor plane
with the DRM core, we should use that universal plane support when
handling legacy cursor ioctls. Drivers that transition to universal
planes won't have to maintain separate legacy ioctl handling; drivers
that don't transition to universal planes will continue to operate
without any change to behavior.
Note that there's a bit of a mismatch between the legacy cursor ioctls
and the universal plane API's --- legacy ioctl's use driver buffer
handles directly whereas the universal plane API takes drm_framebuffers.
Since there's no way to recover the driver handle from a
drm_framebuffer, we can implement legacy ioctl's in terms of universal
plane interfaces, but cannot implement universal plane interfaces in
terms of legacy ioctls. Specifically, there's no way to create a
general cursor helper in the way we previously created a primary plane
helper.
It's important to land this patch before any patches that add universal
cursor support to individual drivers so that drivers don't have to worry
about juggling two different styles of reference counting for cursor
buffers when userspace mixes and matches legacy and universal cursor
calls. With this patch, a driver that switches to universal cursor
support may assume that all cursor buffers are wrapped in a
drm_framebuffer and can rely on framebuffer reference counting for all
cursor operations.
v4:
- Add comments pointing out setplane_internal's reference-eating
semantics.
v3:
- Drop drm_mode_rmfb() call that is no longer needed now that we're
using setplane_internal(), which takes care of deref'ing the
appropriate framebuffer.
v2:
- Use new add_framebuffer_internal() function to create framebuffer
rather than trying to call directly into the ioctl interface and
look up the handle returned.
- Use new setplane_internal() function to update the cursor plane
rather than calling through the ioctl interface. Note that since
we're no longer looking up an fb_id, no extra reference will be
taken here.
- Grab extra reference to fb under lock in !BO case to avoid issues
where racing userspace could cause the fb to be destroyed out from
under us after we grab the fb pointer.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
HDMI deep color setup must know which modes are supported if
it needs to degrade gracefully, as only 12 bpc / dc_36 is
guaranteed, but 10 bpc / dc_30 is optional. The maximum bpc
is not sufficient for this.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For atomic, it will be quite necessary to not need to care so much
about locking order. And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.
Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.
Atomic will use this to keep track of which locks have been acquired
in a transaction.
v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
After the split-out of crtc locks from the big mode_config.mutex
there's still two major areas it protects:
- Various connector probe states, like connector->status, EDID
properties, probed mode lists and similar information.
- The links from connector->encoder and encoder->crtc and other
modeset-relevant connector state (e.g. properties which control the
panel fitter).
The later is used by modeset operations. But they don't really care
about the former since it's allowed to e.g. enable a disconnected VGA
output or with a mode not in the probed list.
Thus far this hasn't been a problem, but for the atomic modeset
conversion Rob Clark needs to convert all modeset relevant locks into
w/w locks. This is required because the order of acquisition is
determined by how userspace supplies the atomic modeset data. This has
run into troubles in the detect path since the i915 load detect code
needs _both_ protections offered by the mode_config.mutex: It updates
probe state and it needs to change the modeset configuration to enable
the temporary load detect pipe.
The big deal here is that for the probe/detect users of this lock a
plain mutex fits best, but for atomic modesets we really want a w/w
mutex. To fix this lets split out a new connection_mutex lock for the
modeset relevant parts.
For simplicity I've decided to only add one additional lock for all
connector/encoder links and modeset configuration states. We have
piles of different modeset objects in addition to those (like bridges
or panels), so adding per-object locks would be much more effort.
Also, we're guaranteed (at least for now) to do a full modeset if we
need to acquire this lock. Which means that fine-grained locking is
fairly irrelevant compared to the amount of time the full modeset will
take.
I've done a full audit, and there's just a few things that justify
special focus:
- Locking in drm_sysfs.c is almost completely absent. We should
sprinkle mode_config.connection_mutex over this file a bit, but
since it already lacks mode_config.mutex this patch wont make the
situation any worse. This is material for a follow-up patch.
- omap has a omap_framebuffer_flush function which walks the
connector->encoder->crtc links and is called from many contexts.
Some look like they don't acquire mode_config.mutex, so this is
already racy. Again fixing this is material for a separate patch.
- The radeon hot_plug function to retrain DP links looks at
connector->dpms. Currently this happens without any locking, so is
already racy. I think radeon_hotplug_work_func should gain
mutex_lock/unlock calls for the mode_config.connection_mutex.
- Same applies to i915's intel_dp_hot_plug. But again, this is already
racy.
- i915 load_detect code needs to acquire this lock. Which means the
w/w dance due to Rob's work will be nicely contained to _just_ this
function.
I've added fixme comments everywhere where it looks suspicious but in
the sysfs code. After a quick irc discussion with Dave Airlie it
sounds like the lack of locking in there is due to sysfs cleanup fun
at module unload.
v1: original (only compile tested)
v2: missing mutex_init(), etc (from Rob Clark)
v3: i915 needs more care in the conversion:
- Protect the edp pp logic with the connection_mutex.
- Use connection_mutex in the backlight code due to
get_pipe_from_connector.
- Use drm_modeset_lock_all in suspend/resume paths.
- Update lock checks in the overlay code.
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
An object property is an id (idr) for a drm mode object. This
will allow a property to be used set/get a framebuffer, CRTC, etc.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we continue to use bitmask for type, we will quickly run out of room
to add new types. Split this up so existing part of bitmask range
continues to function as before, but reserve a chunk of the remaining
space for an integer type-id. Wrap this all up in some type-check
helpers to keep the backwards-compat uglyness contained.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No longer used or needed as the structs have a name field.
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This makes drm_get_encoder_name() thread safe.
Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01\
.ptsecurity.ru
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Update pull request with drm core patches. Mostly some polish for the
primary plane stuff and a pile of patches all over from Thierry. Has
survived a few days in drm-intel-nightly without causing ill.
I've frobbed my scripts a bit to also tag my topic branches so that you
have something stable to pull - I've accidentally pushed a bunch more
patches onto this branch before you've taken the old pull request.
* tag 'topic/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel:
drm: Make drm_crtc_helper_disable() return void
drm: Fix indentation of closing brace
drm/dp: Fix typo in comment
drm: Fixup flip-work kerneldoc
drm/fb: Fix typos
drm/edid: Cleanup kerneldoc
drm/edid: Drop revision argument for drm_mode_std()
drm: Try to acquire modeset lock on panic or sysrq
drm: remove unused argument from drm_open_helper
drm: Handle ->disable_plane failures correctly
drm: Simplify fb refcounting rules around ->update_plane
drm/crtc-helper: gc usless connector loop in disable_unused_functions
drm/plane_helper: don't disable plane in destroy function
drm/plane-helper: Fix primary plane scaling check
drm: make mode_valid callback optional
drm/edid: Fill PAR in AVI infoframe based on CEA mode list
Populate PAR in infoframe structure. If there is a user setting for PAR, then
that value is set. Else, value is taken from CEA mode list if VIC is found.
Else, PAR is calculated from resolution. If none of these conditions are
satisfied, PAR is NONE as per initialization.
v2: Removed the part which sets PAR according to user input, based on
Daniel's review comments.
A separate patch will be submitted to create a property that would enable a
user space app to set aspect ratio for AVI infoframe.
v2: Removed the part which sets PAR according to user input, based on
Daniel's review comments.
v3: Removed calculation of PAR for non-CEA modes as per discussion with
Ville.
A separate patch will be submitted to create a property that would enable a
user space app to set aspect ratio for AVI infoframe.
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Squash in fixup for htmldocs.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a new drm_crtc_init_with_planes() to allow drivers to provide
specific primary and cursor planes at CRTC initialization. The existing
drm_crtc_init() interface remains to avoid driver churn in existing
drivers; it will initialize the CRTC with a plane helper-created primary
plane and no cursor plane.
v2:
- Move drm_crtc_init() to plane helper file so that nothing in the DRM
core depends on helpers. [suggested by Daniel Vetter]
- Keep cursor parameter to drm_crtc_init_with_planes() a void* until
we actually add cursor support. [suggested by Daniel Vetter]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Add a plane type property to allow userspace to distinguish plane types.
v2: Driver-specific churn eliminated now that drm_plane_init() and
drm_universal_plane_init() were separated out in a previous patch.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Add a new plane initialization interface for universal plane support
that allows a specific plane type (primary, cursor, or overlay) to
be specified.
drm_plane_init() remains as a compatibility API to reduce churn in
existing drivers. The 'bool priv' parameter has been changed to
'bool is_primary' under the assumption that all existing uses of
private planes were representing primary planes.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
This function will be used by the universal plane helpers and may also
be useful for individual drivers.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The DRM core currently only tracks "overlay"-style planes. Start
refactoring the plane handling to allow other plane types (primary and
cursor) to also be placed on the DRM plane list.
v2: Add drm_for_each_legacy_plane() iterator to smooth transition
of drivers with plane loops.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
I want to also include kerneldoc from the header (for static inline
functions and structs), but fishing the right pieces out of a giant
header is a real pain. So split things out.
Note that it's not a really clean header with sane include orders, but
given's drm historical knack for giant headers detangling this is a
major task.
v2: Also extract struct drm_cmdline_mode.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's only used by imx, and that one gets it wrong - there's no need
to deteach the encoder before removing it.
And really, neither current drm modesetting code nor all the userspace
we have can handle dynamic changes in the set of possible encoders for
a given connector. So let's just remove this before someone starts
doing something really nasty with it.
As a plus, one less kerneldoc comment to write.
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Fix the execbuf rebind performance regression due to topic/ppgtt (Chris).
- Fix up the connector cleanup ordering for sdvod i2c and dp aux devices (Imre).
- Try to preserve the firmware modeset config on driver load. And a bit of prep
work for smooth takeover of the fb contents (Jesse).
- Prep cleanup for larger gtt address spaces on bdw (Ben).
- Improve our vblank_wait code to make hsw modesets faster (Paulo).
- Display debugfs file (Jesse).
- DRRS prep work from Vandana Kannan.
- pipestat interrupt handler to fix a few races around vblank/pageflip handling
on byt (Imre).
- Improve display fuse handling for display-less SKUs (Damien).
- Drop locks while stalling for the gpu when serving pagefaults to improve
interactivity (Chris).
- And as usual piles of other improvements and small fixes all over.
* tag 'drm-intel-next-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel: (65 commits)
drm/i915: fix NULL deref in the load detect code
drm/i915: Only bind each object rather than for every execbuffer
drm/i915: Directly return the vma from bind_to_vm
drm/i915: Simplify i915_gem_object_ggtt_unpin
drm/i915: Allow blocking in the PDE alloc when running low on gtt space
drm/i915: Don't allocate context pages as mappable
drm/i915: Handle set_cache_level errors in the status page setup
drm/i915: Don't pin the status page as mappable
drm/i915: Don't set PIN_MAPPABLE for legacy ringbuffers
drm/i915: Handle set_cache_level errors in the pipe control scratch setup
drm/i915: split PIN_GLOBAL out from PIN_MAPPABLE
drm/i915: Consolidate binding parameters into flags
drm/i915: sdvo: add i2c sysfs symlink to the connector's directory
drm/i915: sdvo: fix error path in sdvo_connector_init
drm/i915: dp: fix order of dp aux i2c device cleanup
drm/i915: add unregister callback to connector
drm/i915: don't reference null pointer at i915_sink_crc
drm/i915/lvds: Remove dead code from failing case
drm/i915: don't preserve inherited configs with nothing on v2
drm/i915/bdw: Split up PPGTT cleanup
...
Some hardware may not support standard 64x64 cursors. Add
a drm cap to query the cursor size from the kernel. Some examples
include radeon CIK parts (128x128 cursors) and armada (32x64 or 64x32).
This allows things like device specific ddxes to remove asics specific
logic and also allows xf86-video-modesetting to work properly with hw
cursors on this hardware. Default to 64 if the driver doesn't specify
a size.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Just like we have for connector type etc.
v2: drop static array (Chris)
v3: add kdoc (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These patches fix some issues caused by the DRM panel support from the
previous pull request and add two more panels (for the Toshiba AC100 as
well as the Seaboard and Ventana).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=NfNj
-----END PGP SIGNATURE-----
Merge tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.14-rc1 (update)
These patches fix some issues caused by the DRM panel support from the
previous pull request and add two more panels (for the Toshiba AC100 as
well as the Seaboard and Ventana).
* tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Obtain head number from DT
drm/panel: update EDID BLOB in panel_simple_get_modes()
gpu: host1x: Remove unnecessary include
drm/tegra: Use proper data type
drm/tegra: Clarify how panel modes override others
drm/tegra: Fix possible CRTC mask for RGB outputs
drm/i915: Use drm_encoder_crtc_ok()
drm: Move drm_encoder_crtc_ok() to core
drm: provide a helper for the encoder possible_crtcs mask
drm/tegra: Don't check resource with devm_ioremap_resource()
drm/panel: Add support for Chunghwa CLAA101WA01A panel
drm/panel: Add support for Samsung LTN101NT05 panel
Here's the vblank timestamp pull request you wanted.
I addressed the few bugs that Mario pointed out and added
the r-bs.
As it has been a while since I made the changes, I gave it a
quick spin on a few different i915 machines. Fortunately
everything still seems to be fine.
* 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux:
drm/i915: Add a kludge for DSL incrementing too late and ISR not working
drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos()
drm: Pass 'flags' from the caller to .get_scanout_position()
drm: Fix vblank timestamping constants for interlaced modes
drm/i915: Fix scanoutpos calculations for interlaced modes
drm: Change {pixel,line,frame}dur_ns from s64 to int
drm: Use crtc_clock in drm_calc_timestamping_constants()
drm/radeon: Populate crtc_clock in radeon_atom_get_tv_timings()
drm: Simplify the math in drm_calc_timestamping_constants()
drm: Improve drm_calc_timestamping_constants() documentation
drm/i915: Call drm_calc_timestamping_constants() earlier
drm/i915: Kill hwmode save/restore
drm: Pass the display mode to drm_calc_vbltimestamp_from_scanoutpos()
drm: Pass the display mode to drm_calc_timestamping_constants()
Adding picture aspect ratio for CEA modes based on CEA-861D Table 3 or
CEA-861E Table 4. This is useful for filling up the detail in AVI
infoframe.
v2: Ville's review comments incorporated
Added picture aspect ratio as part of edid_cea_modes instead of DRM_MODE
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Using s64 for the timestamping constants is wasteful. Signed 32bit
integers get us a range of over +-2 seconds. Presuming that no-one
wants to a vrefresh rate less than 0.5, we can switch to using int
for the timestamping constants. We save a few bytes in drm_crtc and
avoid a bunch of 64bit math.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Using the new drm_crtc_mask() function, drm_encoder_crtc_ok() can now be
written in a significantly shorter way, so it can be moved to a header
file and be made static inline.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The encoder possible_crtcs mask identifies which CRTCs can be bound to
a particular encoder. Each bit from bit 0 defines an index in the list
of CRTCs held in the DRM mode_config crtc_list. Rather than having
drivers trying to track the position of their CRTCs in the list, expose
the code which already exists for calculating the appropriate mask bit
for a CRTC.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[treding@nvidia.com: add drm_crtc_index(), move to core]
Signed-off-by: Thierry Reding <treding@nvidia.com>
New helper function to set the preferred video mode. Can be called
after drm_add_modes_noedid if you don't want the largest supported
video mode be used by default.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for the Armada 510 display subsystem found on the
Marvell Dove devices. This IP is re-used across several different Marvell
SoCs with various tweaks, and this driver has been structured to allow
the other IPs to re-use the bulk of this code; further work in this area
is expected from interested parties.
This has been extensively tested on the SolidRun Cubox platform and
appears to work well there.
[airlied: update for api changes merged previous to this]
So drm was abusing device lifetimes, by having embedded device structures
in the minor and connector it meant that the lifetime of the internal drm
objects (drm_minor and drm_connector) were tied to the lifetime of the device
files in sysfs, so if something kept those files opened the current code
would kfree the objects and things would go downhill from there.
Now in reality there is no need for these lifetimes to be so intertwined,
especailly with hotplugging of devices where we wish to remove the sysfs
and userspace facing pieces before we can unwind the internal objects due
to open userspace files or mmaps, so split the objects out so the struct
device is no longer embedded and do what fbdev does and just allocate
and remove the sysfs inodes separately.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds support for the pair of LCD controllers on the Marvell
Armada 510 SoCs. This driver supports:
- multiple contiguous scanout buffers for video and graphics
- shm backed cacheable buffer objects for X pixmaps for Vivante GPU
acceleration
- dual lcd0 and lcd1 crt operation
- video overlay on each LCD crt via DRM planes
- page flipping of the main scanout buffers
- DRM prime for buffer export/import
This driver is trivial to extend to other Armada SoCs.
Included in this commit is the core driver with no output support; output
support is platform and encoder driver dependent.
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The conflict in intel_drv.h tripped me up a bit since a patch in dinq
moves all the functions around, but another one in drm-next removes a
single function. So I'ev figured backing this into a backmerge would
be good.
i915_dma.c is just adjacent lines changed, nothing nefarious there.
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/intel_drv.h
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The kernel shouldn't accept invalid modes, just say No.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This allows us to use fewer bits in the mode structure, leaving room for
future work while allowing more stereo layouts types than we could have
ever dreamt of.
I also exposed the previously private DRM_MODE_FLAG_3D_MASK to set in
stone that we are using 5 bits for the stereo layout enum, reserving 32
values.
Even with that reservation, we gain 3 bits from the previous encoding.
The code adding the mandatory stereo modes needeed to be adapted as it was
relying or being able to or stereo layouts together.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When using the frame packing and a single big framebuffer, some hardware
requires that we do everything like if we were scanning out the big
buffer itself. Let's instrument drm_mode_set_crtcinfo() to be able to do
this adjustement if the driver is asking for it.
v2: Use crtc_vtotal and multiply the clock by 2 instead of
reconstructing it (Ville Syrjälä)
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like the various timings, make it possible to have a clock field
what we can tweak before giving it to hardware.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This field is unused. Garbage collect it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This field was only accessed by the nouveau driver, but never set. So
concluded we can rid of this one.
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like with interlaced or double scan modes, make stereo modes a
per-connector opt-in to give a chance to driver authors to make it work
before enabling it.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When scanning out a stereo mode, the AVI infoframe vic field has to be
the underlyng 2D VIC. Before that commit, we weren't matching the CEA
mode because of the extra stereo flag and then were setting the VIC
field in the AVI infoframe to 0.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
HDMI 1.4a defines a few layouts that we'd like to expose. This commits
add new modeinfo flags that can be used to list the supported stereo
layouts (when querying the list of modes) and to set a given stereo 3D
mode (when setting a mode).
v2: Add a drm_mode_is_stereo() helper
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have some code duplication related to EDID duplication. Add a helper.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Let applications know whether the kernel supports asynchronous page
flipping.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This lets drivers see the flags requested by the application
[airlied: fixup for rcar/imx/msm]
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Unfortunately, I haven't been thorough enough in:
commit ddecb10cf4
Author: Lespiau, Damien <damien.lespiau@intel.com>
Date: Tue Aug 20 00:53:04 2013 +0100
drm: Remove drm_mode_create_dithering_property()
And forgot to remove the dithering_mode_property member of struct
drm_mode_config.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This function is only used inside drm_edid.c.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
These were introduced in the very first DRM commit:
commit f453ba0460
Author: Dave Airlie <airlied@redhat.com>
Date: Fri Nov 7 14:05:41 2008 -0800
DRM: add mode setting support
Add mode setting support to the DRM layer.
But are unused.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It's only used in drm_crtc.c.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The last user was removed in
commit 575dc34ee0
Author: Dave Airlie <airlied@redhat.com>
Date: Mon Sep 7 18:43:26 2009 +1000
drm/kms: remove old std mode fallback code.
The new code adds modes in the helper, which makes more sense
I disliked the non-driver code adding modes.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was last used by nouveau, replaced by a driver-specific property
in:
commit de69185573
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon Oct 17 12:23:41 2011 +1000
drm/nouveau: improve dithering properties, and implement proper auto mode
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A few prototypes have been left in the headers, their function friends
long gone.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This makes it so that reloading a module does not cause all the
connector ids to change, which are user-visible and sometimes used
for configuration.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This function is unused.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 160954b7bc.
This was rearming the workqueue with a 0 timeout, causing
a WARN_ON, and possible loop.
Daniel writes:
"I've looked a bit into this and I think we need to have a separate
work struct for recovering these lost hotplug events since the
continuous self-rearming case is a real risk (e.g. if a connector
flip-flops all the time). At least I don't see a sane way to block out
re-arming with the current code in a simple way. So reverting the
offender seems like the right thing and I'll go back to the drawing
board for 3.12."
Signed-off-by: Dave Airlie <airlied@redhat.com>
So it looks like for virtual hw cursors on QXL we need to inform
the "hw" device what the cursor hotspot parameters are. This
makes sense if you think the host has to draw the cursor and interpret
clicks from it. However the current modesetting interface doesn't support
passing the hotspot information from userspace.
This implements a new cursor ioctl, that takes the hotspot info as well,
userspace can try calling the new interface and if it gets -ENOSYS it means
its on an older kernel and can just fallback.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).
To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).
Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Drivers are allowed (actually have to) disable unrelated crtcs in
their ->set_config callback (when we steal all the connectors from
that crtc). If they do that they'll clear crtc->fb to NULL.
Which results in a refcount leak, since the drm core is keeping track
of that reference.
To fix this track the old fb of all crtcs and adjust references for
all of them. Of course, since we only hold an additional reference for
the fb for the current crtc we need to increase refcounts before we
drop the old one.
This approach has the benefit that it inches us a bit closer to an
atomic modeset world, where we want to update the config of all crtcs
in one step.
This regression has been introduce in the framebuffer refcount
conversion, specifically in
commit b0d1232589
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 11 01:07:12 2012 +0100
drm: refcounting for crtc framebuffers
Reported-by: Russell King <linux@arm.linux.org.uk>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There's a bunch of unused members inside drm_plane, bloating the size of
the structure needlessly. Eliminate them.
v2: Remove all of it from kernel-doc too
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
drm_plane_force_disable() will forcibly disable the plane even if user
had previously requested the plane to be enabled.
This can be used to force planes to be off when restoring the fbdev
mode.
The code was simply pulled from drm_framebuffer_remove(), which now
calls the new function as well.
v2: Check plane->fb in drm_plane_force_disable(), drop bogus comment
about disabling crtc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The structures and strings involved with various pretty-print functions
aren't meant to be modified, so make them all const. The exception is
drm_connector_enum_list which does get modified in drm_connector_init().
While at it move the drm_get_connector_status_name() prototype from
drmP.h to drm_crtc.h where it belongs.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rather than just printing the pixel format as a hex number, decode the
fourcc into human readable form, and also decode the LE vs. BE flag.
Keep printing the raw hex number too in case it contains non-printable
characters.
Some examples what the new drm_get_format_name() produces:
DRM_FORMAT_XRGB8888: "XR24 little-endian (0x34325258)"
DRM_FORMAT_YUYV: "YUYV little-endian (0x56595559)"
DRM_FORMAT_RGB565|DRM_FORMAT_BIG_ENDIAN: "RG16 big-endian (0xb6314752)"
Unprintable characters: "D??? big-endian (0xff7f0244)"
v2: Fix patch author
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no way to use modes added to the user_modes list. We never
look at the contents of said list in the kernel, and the only operations
userspace can do are attach and detach. So the only "benefit" of this
interface is wasting kernel memory.
Fortunately it seems no real user space application ever used these
ioctls. So just kill them.
Also remove the prototypes for the non-existing drm_mode_addmode_ioctl()
and drm_mode_rmmode_ioctl() functions.
v2: Use drm_noop instead of completely removing the ioctls
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drivers/gpu/drm/drm_pci.c:155:5: warning: symbol 'drm_pci_set_busid' was not declared. Should it be static?
drivers/gpu/drm/drm_pci.c:197:5: warning: symbol 'drm_pci_set_unique' was not declared. Should it be static?
drivers/gpu/drm/drm_pci.c:269:5: warning: symbol 'drm_pci_agp_init' was not declared. Should it be static?
drivers/gpu/drm/drm_crtc.c:181:1: warning: symbol 'drm_get_dirty_info_name' was not declared. Should it be static?
drivers/gpu/drm/drm_crtc.c:1123:5: warning: symbol 'drm_mode_group_init' was not declared. Should it be static?
drivers/gpu/drm/drm_modes.c:918:6: warning: symbol 'drm_mode_validate_clocks' was not declared. Should it be static?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
