Commit Graph

2572 Commits

Author SHA1 Message Date
Paul Mundt
c4e708dc52 sh: Fix up the CONFIG_PERF_EVENTS=n build for SH-4.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-12 16:20:36 +09:00
Paul Mundt
a4d9d0b8a8 sh: Enable PMB support for all SH-4A CPUs.
Presently the PMB options were limited to a number of CPUs they were
tested with, but it is generally available on all SH-4A CPUs, so just
drop the subtype conditionals.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-11 10:56:13 +09:00
Paul Mundt
0fe69d773f sh: perf events: Document SH-4A raw event codes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-09 14:11:07 +09:00
Paul Mundt
76d2318020 Merge branch 'sh/stable-updates' 2009-11-09 10:55:36 +09:00
Thomas Gleixner
969e46a853 sh: Replace old style lock initializer
SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-09 10:47:40 +09:00
Matt Fleming
a9d244a2ff sh: Account for cache aliases in flush_icache_range()
The icache may also contain aliases so we must account for them just
like we do when manipulating the dcache. We usually get away with
aliases in the icache because the instructions that are read from memory
are read-only, i.e. they never change. However, the place where this
bites us is when the code has been modified.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-09 10:45:30 +09:00
Paul Mundt
421b541110 sh: unwinder: Fix up invalid PC refetch in dwarf unwinder.
The dwarf unwinder presently attempts to provide a sane PC value if none
is provided, however the logic is broken and cases where a previous valid
dwarf frame exists along with a bogus PC value can still proceed. This
fixes up the test and prevents the unwinder from blowing up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-06 17:23:33 +09:00
Paul Mundt
e9c4148fd4 sh: oprofile: Fix up count size mismatch for common impl.
This reduces the 'count' size in the common support structure to 32-bits
so that it matches up with what oprofile is expecting. The SH7750 code
was using a nasty oprofilefs hack to expose the 48-bit counter, although
no other implementations were. Now that the offending driver has been
killed off, it's possible to restore some semblance of sanity.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-05 17:13:15 +09:00
Paul Mundt
093aed1937 sh: oprofile: Kill off bitrotted SH7750 driver.
This kills off the old SH7750 oprofile driver, preferring perf instead.
As this driver has a number of bugs that no one seems to have noticed,
it's safe to kill this off now rather than providing an extended
transition period.

The old oprofile framework is still kept in place for now, primarily to
give out-of-tree drivers a chance to transition off. But this too will be
killed off in short order.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-05 17:09:59 +09:00
Paul Mundt
1d823323f2 sh: perf events: Add support for SH7750-style counters.
This adds perf events support for the SH7750/SH7750S/SH7091 performance
counters.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-05 17:02:03 +09:00
Paul Mundt
830fafecc2 sh: perf events: Preliminary callchain support.
This implements preliminary support for perf callchains (at the moment
only the kernel side is implemented). The actual implementation itself is
just a simple wrapper around the unwinder API, which allows for callchain
generation with or without the dwarf unwinder.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-05 16:20:09 +09:00
Paul Mundt
d1b261ef85 sh: Default-enable SPU clock for SH7724.
Wanted by the SPU2 UIO driver, which really ought to be handling this
itself. Default enable it for now, until the driver gets a bit more
intelligent.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-05 14:06:36 +09:00
Kuninori Morimoto
2de339231b sh: sh7724: Add SPU2 support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-05 13:58:46 +09:00
Paul Mundt
8820002c18 sh: perf events: Fix up uninitialized variable warning.
'config' can be unintialized, and although it's not really an error, it
still manages to trigger the -Werror with certain toolchains. Initialize
it early to shut up gcc.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-05 13:56:50 +09:00
Rafael Ignacio Zurita
9dcaa7b25f ALSA: sh: add SuperH DAC audio driver for ALSA V4
This is a port of the sound/oss/sh_dac_audio.c driver.
The driver uses an on-chip 8-bit D/A converter, which has a speaker connected
to one of its channels, found in several ancient HP machines.
For interrupts it uses a high-resolution timer (hrtimer).
Tested on SH7709 based hp6xx (HP Jornada 680/690 and HP Palmtop 620lx/660lx).

Also, since OSS Emulation works, the old OSS sound/oss/sh_dac_audio.c driver
would be obsolete soon, and it could be removed.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-04 09:17:40 +01:00
Roel Kluin
9016332014 sh: Make sure indexes are positive
The indexes are signed, make sure they are not negative
when we read array elements.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04 11:48:07 +09:00
Magnus Damm
c4b973f532 sh: Add RWDT save/restore code for sh7724 R-standby
Add sh7724 code to save and restore RWDT state during
R-standby. Without this patch the watchdog will generate
a reset shortly after resuming from R-standby.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04 11:48:05 +09:00
Paul Mundt
a37c6c7aec sh: mach-se: Convert SE7722 FPGA to dynamic IRQ allocation.
This gets rid of the arbitrary set of vectors used by the SE7722 FPGA
interrupt controller and witches over to a completely dynamic set.
No assumptions regarding a contiguous range are made, and the platform
resources themselves need to be filled in lazily.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04 11:44:21 +09:00
Paul Mundt
45b9deaf14 sh: intc: Handle legacy IRQ reservation in vector map.
Different CPUs will have different starting vectors, with varying
amounts of reserved or unusable vector space prior to the first slot.
This introduces a legacy vector reservation system that inserts itself in
between the CPU vector map registration and the platform specific IRQ
setup. This works fine in practice as the only new vectors that boards
need to establish on their own should be dynamically allocated rather
than arbitrarily assigned. As a plus, this also makes all of the
converted platforms sparseirq ready.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02 15:43:20 +09:00
Magnus Damm
3d0de41442 sh: Remove unused WP signal for SDHI0 and KFR2R09
Get rid of the unused WP signal for SDHI0 on KFR2R09.
This because yc304 on KFR2R09 is a Micro SD slot which
does not implement the WP signal.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02 14:19:29 +09:00
Magnus Damm
8b431a7e66 sh: Add SDHI1 support to the AP325RXA board
Update the SDHI platform data for the AP325RXA board
to include support for the CN7 Micro SD Card slot.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02 14:19:28 +09:00
Magnus Damm
58ee987e2f sh: Add KFR2R09 specific memory pre/post R-standby code
Add R-standby support to the KFR2R09 sdram code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:38:49 +09:00
Magnus Damm
bb3e0eed9d sh: Add R-standby sleep mode support
Add R-standby specific bits to the SuperH Mobile sleep code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:38:45 +09:00
Magnus Damm
03625e7107 sh: Use RSMEM for sleep code on sh7724
Use RSMEM instead of ILMEM for sleep mode code storage on SH7724.
This allows us to use R-standby mode on SH7724.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:38:33 +09:00
Magnus Damm
99675a7a45 sh: Add MMU and Cache handling sleep mode code
Add MMU and cache handling functionality to the SuperH Mobile
sleep code. The MMU and cache registers are saved and restored.
The MMU is disabled and the cache is flushed and disabled before
entering sleep modes if the SUSP_SH_MMU flag is set. This flag
should be set in the case of R-standby and most likely for future
U-standby support as well.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:37:56 +09:00
Magnus Damm
02bf89347c sh: Keep track of allowed sleep modes
Add code to keep track of supported sleep modes. This to
only export cpuidle modes that are backed by board support
code. Also, do not allow suspend-to-ram if sdram board code
is missing.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:37:42 +09:00
Magnus Damm
323ef8dba6 sh: Rework SuperH Mobile sleep mode code
Rework the SuperH Mobile sleep code from including
board specific code to allowing each board to provide
pre/post code snippets. These snippets should contain
sdram management code to enter and leave self-refresh.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:36:52 +09:00
Magnus Damm
eb0cd9e88c sh: Add Ecovec24 specific memory pre/post sleep code
Add self-refresh handling code for the Ecovec24 board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:33:46 +09:00
Magnus Damm
86c7d03a0f sh: Add ap325rxa specific memory pre/post sleep code
Add self-refresh handling code for the AP325RXA board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:33:44 +09:00
Magnus Damm
53528928d1 sh: Move ap325rxa board code into separate directory
Move the AP325RXA board code from a single board file
to a separate directory. This to make it easy to add
support for sdram sleep mode code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:33:43 +09:00
Magnus Damm
13fa551b5e sh: Add migor specific memory pre/post sleep code
Add self-refresh handling code for the Migo-R board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:59:27 +09:00
Magnus Damm
3b9f2952a3 sh: Add ms7724se specific memory pre/post sleep code
Add self-refresh handling code for the MS7724SE board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:59:26 +09:00
Magnus Damm
67e522d0f9 sh: Add kfr2r09 specific memory pre/post sleep code
Add self-refresh handling code for the KFR2R09 board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:59:26 +09:00
Magnus Damm
159f8cd99e sh: Allow boards to register memory pre/post sleep code
Add code to allow boards registering self-contained
functions for going to/from self-refresh. At this
point the board code is unused. When all supported
boards have been converted then the new sleep code
will make use of these functions.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:55:24 +09:00
Magnus Damm
da14909eb0 sh: Add sh7724 notifier for R-standby save/restore
Make use of the recently added notifier chains for sh7724
r-standby register save/restore handling. At this point
only the BSC and INTC are handled.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:55:14 +09:00
Magnus Damm
49f42644fd sh: Add notifiers chains for cpu/board code
This patch adds atomic notifier chains for pre/post
sleep events. Useful for cpu code and boards that
need to save and restore register state before and
after entering a sleep mode.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:54:59 +09:00
Matt Fleming
eb3118f652 sh: Do not apply virt_to_phys() to a physical address
The variable 'phys' already contains the physical address to flush. It
is not a virtual address and should not be passed to virt_to_phys().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:53:22 +09:00
Paul Mundt
1d317f90d9 sh: perf events: Kill off left over debugging cruft.
num_events should be compared > MAX_HWEVENTS and not >=. The latter was
used as a debugging test which accidentally slipped in.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 18:02:15 +09:00
Paul Mundt
ac44e66947 sh: perf events: Add preliminary support for SH-4A counters.
This adds in preliminary support for the SH-4A performance counters.
Presently only the first 2 counters are supported, as these are the ones
of the most interest to the perf tool and end users. Counter chaining is
not presently handled, so these are simply implemented as 32-bit
counters.

This also establishes a perf event support framework for other hardware
counters, which the existing SH-4 oprofile code will migrate over to as
the SH-4A support evolves.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 17:57:54 +09:00
Kuninori Morimoto
3714a9a026 sh: mach-ecovec24: Add USB1 gadget support
USB1 can change to host/function by checking PTB3.
This patch add USB1 gadget support and check PTB3 when boot,
and change name to usb1_common_XXX from usb1_host_XXX.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 16:07:19 +09:00
Magnus Damm
5b380ec11d sh: add SDHI1 support to ms7724se
Add support for cn8 and SDHI1 to the ms7724se board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 09:18:24 +09:00
Magnus Damm
8013cc9a5d sh: mac address through private data for sh_eth on ms7724se
Convert the ms7724se board code to pass the mac
address to the sh_eth driver using platform data.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 09:18:24 +09:00
Paul Mundt
9b3b21f788 Merge branch 'sh/stable-updates' 2009-10-27 17:10:24 +09:00
Paul Mundt
72f0c137a5 sh: enable PERF_USE_VMALLOC across the board.
The vast majority of SH platforms want this, and the few that don't
aren't going to care one way or the other. Enable it across the board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 17:08:55 +09:00
Paul Mundt
94c285108e sh: Bump up dma_ops initialization far earlier in the boot process.
Presently this was tacked on to the dma debug init bits from
fs_initcall(), which is far too late for devices setting up their own
per-device coherent areas.

Throw this in the beginning of mem_init(), as per the x86 iommu
allocation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 17:07:45 +09:00
Paul Mundt
4c978ca319 sh: Clean up more superfluous symbol exports.
Many of these symbols went away completely, or we just never cared about
them in the first place. Trim the exports down to the essential set.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 11:51:19 +09:00
Paul Mundt
0a993b0a29 sh64: cache flush symbol exports.
These were previously hidden in sh_ksyms_32, despite also being needed
for sh64 now that the cache.c code is shared.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 10:51:35 +09:00
Paul Mundt
478fb15800 sh: Fix up dma_is_consistent().
This fixes up the dma_is_consistent() definition for the various
coherence options.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 10:41:58 +09:00
Paul Mundt
7693465d81 sh: Kill off superfluous arch/sh/drivers/pci/Kconfig.
Now that this contains a grand total of 1 Kconfig option, it's hardly
worth keeping split out. Roll CONFIG_PCI back in to the top-level
architecture Kconfig, along with the other bus types.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 10:36:55 +09:00
Paul Mundt
01be5d63fd sh: Revamp PCI DMA coherence Kconfig bits.
Leaving this configurable caused more trouble than it was ever worth, so
just make it explicit. Boards that are verified one way or the other can
fix up their selects accordingly. We presently default to non-coherent
for most platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 10:35:02 +09:00
Matt Fleming
3f375f12ec sh: Annotate irq functions with "notrace"
Now that SH's irqflags functions are out of line it becomes necessary to
mark them as "notrace" so that we don't try to trace them.

[ Do the same for irq_64.c -- PFM. ]

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 07:37:10 +09:00
Valentin R Sitsikov
f72f7876ae sh: fix watchdog timer for sh7780/sh7785
Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 07:34:29 +09:00
Paul Mundt
ffb4a73d89 sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.
The hugetlb dependencies presently depend on SUPERH && MMU while the
hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This
unfortunately allows SH-3 + MMU configurations to enable hugetlbfs
without a corresponding HPAGE_SHIFT definition, resulting in the build
blowing up.

As SH-3 doesn't support variable page sizes, we tighten up the
dependenies a bit to prevent hugetlbfs from being enabled. These days
we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using
that rather than adding to the list of corner cases in fs/Kconfig.

Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 07:22:37 +09:00
Paul Mundt
a5c461bb3f sh: Document uImage.bin target in archhelp.
This was missing from the previous patch.

Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 07:17:12 +09:00
Magnus Damm
376abbb4b3 sh: mac address through private data for sh_eth on ecovec24
Convert the ecovec24 board code to pass the mac
address to the sh_eth driver using platform data.
Also, remove the static clock to allow Runtime PM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:50:47 +09:00
Magnus Damm
40e4231809 sh: add hwblk_id to sh_eth on ecovec24
Add HWBLK_ETHER to the sh_eth platform device
to allow Runtime PM of the ethernet hardware.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:47:36 +09:00
Paul Mundt
a384fe55c2 Merge branch 'sh/stable-updates' 2009-10-26 19:46:59 +09:00
Magnus Damm
9e24c7e2ac sh: add uImage.bin target
Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:46:25 +09:00
Magnus Damm
88345411df sh: rsk7203 CONFIG_MTD=n fix
Fix the rsk7203 board code to build with CONFIG_MTD=n.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:46:24 +09:00
Magnus Damm
ef01b9a06d sh: fix kexec by removing check for old kexec-tools
This unbreaks kexec support. Without this fix all
cases of kexec fails since __pa() does not behave
like PHYSADDR(). The downside is that we also kill
the code blocking users running old kexec-tools.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:45:45 +09:00
Paul Mundt
6253195b67 Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/kernel/dwarf.c
2009-10-26 10:48:18 +09:00
Paul Mundt
15893fb565 Merge branch 'sh/sdhi-mfd'
Conflicts:
	arch/sh/boards/mach-ecovec24/setup.c
	arch/sh/boards/mach-kfr2r09/setup.c
2009-10-26 10:47:44 +09:00
Kuninori Morimoto
96987d96f0 sh: mach-ecevec24: Add SDHI support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:27 +09:00
Magnus Damm
d2a2fb97d1 sh: SDHI platform data to the kfr2r09 board
Add SD Card support to the kfr2r09 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and yc304.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:06 +09:00
Magnus Damm
0f79af6009 sh: SDHI platform data to the SE7724 board
Add SD Card support to the se7724 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and CN7.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:05 +09:00
Magnus Damm
17f81473d1 sh: SDHI platform data to the AP325RXA board
Convert the AP325 board to use sh_mobile_sdhi for the
SD Card connected to CN3 instead of mmc_spi.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:05 +09:00
Magnus Damm
2e3fc56c8d sh: SDHI platform data to the Migo-R board
Convert the Migo-R board to use sh_mobile_sdhi for the
SD Card connected to CN9 instead of mmc_spi.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:05 +09:00
Matt Fleming
60339fad5c sh: Check for return_to_handler when unwinding the stack
When CONFIG_FUNCTION_GRAPH_TRACER is enabled the function graph tracer
may patch return addresses on the stack with the address of
return_to_handler(). This really confuses the DWARF unwinder because it
will try find the caller of return_to_handler(), not the caller of the
real return address.

So teach the DWARF unwinder how to find the real return address whenever
it encounters return_to_handler().

This patch does not cope very well when multiple return addresses on the
stack have been patched. To make it work properly it would require state
to track how many return_to_handler()'s have been seen so that we'd know
where to look in current->curr_ret_stack[]. So for now, instead of
trying to handle this, just moan if more than one return address on the
stack has been patched.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:04:56 +09:00
Lubomir Rintel
26fadd3672 sh: Build fix: define more __movmem* symbols
ERROR: "__movmemSI12" [net/unix/unix.ko] undefined!
ERROR: "__movmemSI52" [net/ipv6/sit.ko] undefined!
ERROR: "__movmemSI24" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI60" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI16" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI20" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI32" [net/ipv6/ipv6.ko] undefined!

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:00:26 +09:00
Paul Mundt
ba93483f8c sh: __irq_entry annotate do_IRQ().
This adds an __irq_entry annotation for do_IRQ() so that the IRQ
annotation in the function graph tracer works as advertized. We already
have the IRQENTRY section wired up, so this is just a trivial addition
to actually make use of it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 09:58:31 +09:00
Paul Mundt
f32154c9b5 sh: Add dma-mapping support for dma_alloc/free_coherent() overrides.
This moves the current dma_alloc/free_coherent() calls to a generic
variant and plugs them in for the nommu default. Other variants can
override the defaults in the dma mapping ops directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 09:50:51 +09:00
Paul Mundt
73c926bee0 sh: Convert to asm-generic/dma-mapping-common.h
This converts the old DMA mapping support to the new generic
dma-mapping-common.h abstraction.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-20 12:55:56 +09:00
Paul Mundt
14c011deb4 sh: Fix up cacheflush routine symbol exports.
Fixes up flush_dcache_page() references by modules with run-time cache
disabling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-19 15:52:20 +09:00
Paul Mundt
eca28e3764 sh: Fix up uninitialized variable warning in dwarf unwinder.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-19 15:51:21 +09:00
Paul Mundt
1c8db713e2 sh: Fix up smp_mb__xxx() memory barriers for SH-4A SMP.
In the past these were simply wrapping to barrier() which was sufficient
on SH SMP platforms predating SH-4A. Unfortunately due to ll/sc semantics
an explicit synco is needed in these cases, which is sorted for us by
just switching these over to smp_mb(). smp_mb() also has the benefit of
being wrapped to barrier() in the UP and non-SH4A cases, so old behaviour
is maintained for those parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-18 15:36:02 +09:00
Paul Mundt
15dfdddbf0 sh: Disable SCIF2 on the SH-X3 proto CPU.
SCIF2 and the FPU exceptions happen to share vector numbers, one in
EXPEVT and the other in INTEVT. This is a violation of the interface and
should have never made it in to silicon. On top of that, the demux hack
that was added for special dispatch is rather error prone, and introduces
more problems than it solves. Kill all of it off, and just refuse to deal
with SCIF2 outright.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-18 15:13:28 +09:00
Paul Mundt
03fdb70892 sh: Convert to asm-generic/irqflags.h.
This simplifies the irqflags support by switching over to the asm-generic
version. The necessary support functions are brought out-of-line for both
SHcompact and SHmedia instruction sets.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-17 21:06:39 +09:00
Paul Mundt
cae19b5902 sh: Kill off legacy UBC wakeup cruft.
This code was added for some ancient SH-4 solution engines with peculiar
boot ROMs that did silly things to the UBC MSTP bits. None of these have
been in the wild for years, and these days the clock framework wraps up
the MSTP bits, meaning that the UBC code is one of the few interfaces
that is stomping MSTP bits underneath the clock framework. At this point
the risks far outweigh any benefit this code provided, so just kill it
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 18:20:42 +09:00
Paul Mundt
78aed4a63a Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/Kconfig
2009-10-16 18:16:02 +09:00
Paul Mundt
f875295c4b sh: Kill off stray HAVE_FTRACE_SYSCALLS reference.
This seems to have popped back in via some merge damage. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 18:14:19 +09:00
Paul Mundt
896f0c0e8e sh: Support SCHED_MC for SH-X3 multi-cores.
This enables SCHED_MC support for SH-X3 multi-cores. Presently this is
just a simple wrapper around the possible map, but this allows for
tying in support for some of the more exotic NUMA clusters where we can
actually do something with the topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 18:00:02 +09:00
Paul Mundt
9dbe00a56a sh: Fix up IRQ re-enabling for the need_resched() case.
In the case where need_resched() is set in between the cpu_idle() and
pm_idle() calls we were missing an else case for just re-enabling local
IRQs and bailing out. This was noticed by the irqs_disabled() warning,
even though IRQs were being re-enabled elsewhere.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 17:55:59 +09:00
Paul Mundt
0e6d4986e7 sh: Make check_pgt_cache() more aggressive while idling.
This follows the x86 change and moves check_pgt_cache() up under the
!need_resched() tight loop, rather than simply calling in to it when
exiting idle.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 17:27:58 +09:00
Paul Mundt
f533c3d340 sh: Idle loop chainsawing for SMP-based light sleep.
This does a bit of chainsawing of the idle loop code to get light sleep
working on SMP. Previously this was forcing secondary CPUs in to sleep
mode with them not coming back if they didn't have their own local
timers. Given that we use clockevents broadcasting by default, the CPU
managing the clockevents can't have IRQs disabled before entering its
sleep state.

This unfortunately leaves us with the age-old need_resched() race in
between local_irq_enable() and cpu_sleep(), but at present this is
unavoidable. After some more experimentation it may be possible to layer
on SR.BL bit manipulation over top of this scheme to inhibit the race
condition, but given the current potential for missing wakeups, this is
left as a future exercise.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 17:20:58 +09:00
Paul Mundt
94eab0bb20 sh: Force boot CPU in to light sleep mode for SH-X3 SMP.
All of the secondary CPUs are forced in to light sleep mode, but we were
missing the same initialization for the boot CPU. This resulted in
inconsistent sleep modes depending on which CPU we were on, confusing the
idle loop when not polling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 17:19:08 +09:00
Paul Mundt
abeaf33a41 Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/mm/cache-sh4.c
2009-10-16 15:14:50 +09:00
Thomas Gleixner
52a94909f0 sh: Remove BKL from landisk gio.
The open function got the BKL via the big push down. Replace it by
preempt_enable/disable as this is sufficient for an UP machine.

The ioctl can be unlocked because there is no functionality which
requires serialization. The usage by multiple callers is broken with
and without the BKL due to the local static variable addr.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 14:42:33 +09:00
Magnus Damm
5fb80ae8bd sh: disabled cache handling fix.
Add code to handle the cache disabled case. Fixes breakage introduced by
37443ef3f0 ("sh: Migrate SH-4 cacheflush
ops to function pointers."). Without this patch configuring caches off
with CONFIG_CACHE_OFF=y makes kfr2r09 and migo-r lock up in fbdev
deferred io or early user space.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 14:38:48 +09:00
Valentin Sitdikov
a7a7c0e1d1 sh: Fix up single page flushing to use PAGE_SIZE.
Presently The SH-4 cache flushing code uses flush_cache_4096() for most
of the real flushing work, which breaks down to a fixed 4096 unroll and
increment. Not only is this sub-optimal for larger page sizes, it's also
uncovered a bug in sh4_flush_dcache_page() when large page sizes are used
and we have no cache aliases -- resulting in only a part of the page's
D-cache lines being written back.

Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 14:15:38 +09:00
Paul Mundt
731ba3301d sh: Count NMIs in irq_cpustat_t.
This plugs in support for NMI counting per-CPU via irq_cpustat_t.
Modelled after the x86 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 16:42:28 +09:00
Paul Mundt
56bfc42f6c sh: TS_RESTORE_SIGMASK conversion.
Replace TIF_RESTORE_SIGMASK with TS_RESTORE_SIGMASK and define our own
set_restore_sigmask() function.  This saves the costly SMP-safe set_bit
operation, which we do not need for the sigmask flag since TIF_SIGPENDING
always has to be set too.

Based on the x86 and powerpc change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 16:05:42 +09:00
Paul Mundt
b195e46677 Merge branch 'sh/stable-updates' 2009-10-14 15:53:08 +09:00
Paul Mundt
457b646189 sh: Fix a TRACE_IRQS_OFF typo.
The resume_userspace path had TRACE_IRQS_OFF written incorrectly and so
never handled the transition properly. This was fixed once before but
seems to have made it back in the tree. Fix it for good.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 15:50:28 +09:00
Paul Mundt
4d2947f7c6 sh: Optimize the setup_rt_frame() I-cache flush.
This only needs to flush the return code via the legacy path, and just
invalidates uselessly otherwise. This makes the behaviour consistent for
all of the trampoline setup paths.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 15:49:45 +09:00
Paul Mundt
a66c2edea5 sh: Populate initial secondary CPU info from boot_cpu_data.
The secondary CPU info was seeing corrupted results due to not entering
all of the setup paths taken by the boot CPU. So we just memcpy() the
boot cpu data over directly, and then fix up the per-CPU bits.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 15:44:12 +09:00
Paul Mundt
2908df9e2c sh: Tidy up SMP cpuinfo.
Trivial change for cleaning up the cpuinfo pretty printing on SMP, adds a
newline between CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 15:43:52 +09:00
Paul Mundt
eaa47704d9 sh: Use boot_cpu_data for FPU tests in sigcontext paths.
We do not want to use smp_processor_id() from these paths, as they trip
preempt BUGs. Switch the test over to the boot cpu directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 15:43:41 +09:00
Paul Mundt
d780613acc sh: Only invalidate the I-cache range for secondary CPUs stack_start.
Secondary CPUs already take care of the D-cache bits through the common
cache initialization path, and the only thing that is necessary after
twiddling around with stack_start is ensuring that the I-cache changes
are visible (particularly since this tends to be the only part lacking
coherency).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 11:51:28 +09:00
Paul Mundt
36c8719926 sh: Provide CALLER_ADDRx definitions even when ftrace is disabled.
Despite being located in the ftrace header, the CALLER_ADDRx definitions
are used by generic code. As such, we have to provide it generically, and
given that there is no real dependence on ftrace in the first place, the
definitions can just be moved out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-14 11:49:49 +09:00
Magnus Damm
748031f9fd net: allow sh_eth to get mac address through platform data
Extend the sh_eth driver to allow passing the mac address
using the platform data structure. This to simplify board
setup code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 03:44:05 -07:00
Paul Mundt
e4b053d96a sh: ftrace: Make code modification NMI safe.
This cribs the x86 implementation of ftrace_nmi_enter() and friends to
make ftrace_modify_code() NMI safe, particularly on SMP configurations.

For additional notes on the problems involved, see the comment below
ftrace_call_replace().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 16:52:50 +09:00
Paul Mundt
c8afde7f40 sh: Don't profile return_address().
This adds return_address.c to the -pg exclusion list, as this is the
building block for CALLER_ADDRx we do not want to profile this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 16:31:08 +09:00
Arnaldo Carvalho de Melo
a2e2725541 net: Introduce recvmmsg socket syscall
Meaning receive multiple messages, reducing the number of syscalls and
net stack entry/exit operations.

Next patches will introduce mechanisms where protocols that want to
optimize this operation will provide an unlocked_recvmsg operation.

This takes into account comments made by:

. Paul Moore: sock_recvmsg is called only for the first datagram,
  sock_recvmsg_nosec is used for the rest.

. Caitlin Bestler: recvmmsg now has a struct timespec timeout, that
  works in the same fashion as the ppoll one.

  If the underlying protocol returns a datagram with MSG_OOB set, this
  will make recvmmsg return right away with as many datagrams (+ the OOB
  one) it has received so far.

. Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen
  datagrams and then recvmsg returns an error, recvmmsg will return
  the successfully received datagrams, store the error and return it
  in the next call.

This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg,
where we will be able to acquire the lock only at batch start and end, not at
every underlying recvmsg call.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 23:40:10 -07:00
Paul Mundt
5a3abba77d sh: Tidy up the dwarf module helpers.
This enables us to build the dwarf unwinder both with modules enabled and
disabled in addition to reducing code size in the latter case. The
helpers are also consolidated, and modified to resemble the BUG module
helpers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 13:32:19 +09:00
Paul Mundt
ac4fac8cb2 sh: Generalize CALLER_ADDRx support.
This splits out the unwinder implementation and adds a new
return_address() abstraction modelled after the ARM code. The DWARF
unwinder is tied in to this, returning NULL otherwise in the case of
being unable to support arbitrary depths.

This enables us to get correct behaviour with the unwinder enabled,
as well as disabling the arbitrary depth support when frame pointers are
enabled, as arbitrary depths with __builtin_return_address() are not
supported regardless.

With this abstraction it's also possible to layer on a simplified
implementation with frame pointers in the event that the unwinder isn't
enabled, although this is left as a future exercise.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 13:10:14 +09:00
Paul Mundt
5852b203ef Merge branch 'sh/stable-updates' 2009-10-13 12:45:08 +09:00
Paul Mundt
9922262242 sh: ftrace: Fix up syscall tracepoint support.
Sync up with latest core changes in the syscalls tracing area:

- tracing: Map syscall name to number (syscall_name_to_nr())
- tracing: Call arch_init_ftrace_syscalls at boot
- tracing: add support tracepoint ids (set_syscall_{enter,exit}_id())

Taken from the s390 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 12:42:48 +09:00
Paul Mundt
95019b48ad Merge branch 'sh/stable-updates' 2009-10-13 11:27:08 +09:00
Paul Mundt
964f7e5a56 sh: force dcache flush if dcache_dirty bit set.
This too follows the ARM change, given that the issue at hand applies to
all platforms that implement lazy D-cache writeback.

This fixes up the case when a page mapping disappears between the
flush_dcache_page() call (when PG_dcache_dirty is set for the page) and
the update_mmu_cache() call -- such as in the case of swap cache being
freed early. This kills off the mapping test in update_mmu_cache() and
switches to simply testing for PG_dcache_dirty.

Reported-by: Nitin Gupta <ngupta@vflare.org>
Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 11:18:34 +09:00
Paul Mundt
af67c3a9e6 sh: update die() output.
This follows the ARM change, as SH had all of the same issues:

Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 10:57:52 +09:00
Paul Mundt
7a0064d672 Merge branch 'sh/ftrace' of git://github.com/mfleming/linux-2.6 2009-10-13 10:31:50 +09:00
Paul Mundt
8ec006c587 Merge branch 'sh/dwarf-unwinder'
Conflicts:
	arch/sh/kernel/dwarf.c
2009-10-12 08:50:07 +09:00
Paul Mundt
5ab78ff693 Merge branch 'sh/dwarf-unwinder' of git://github.com/mfleming/linux-2.6 into sh/dwarf-unwinder 2009-10-12 08:42:46 +09:00
Matt Fleming
d26cddbbd2 sh: tracing: Use the DWARF unwinder for CALLER_ADDRx
The major reason for implementing the DWARF unwinder in the first place
was so that we could stop using __builtin_return_address(n), which
doesn't work on SH for n > 0.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-10-11 17:56:17 +01:00
Matt Fleming
c2d474d6f8 sh: Remove any reference to recursive functions from comments
Originally, dwarf_unwind_stack() was a recursive function and it seems
that some of the old comments were never updated.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-10-11 17:12:32 +01:00
Matt Fleming
ed4fe7f488 sh: Fix memory leak in dwarf_unwind_stack()
If we broke out of the while (1) loop because the return address of
"frame" was zero, then "frame" needs to be free'd before we return.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-10-11 17:12:28 +01:00
Matt Fleming
a6a2f2ad67 sh: Teach the DWARF unwinder about modules
Pass a module's .eh_frame section to the DWARF unwinder at module load
time so that the section's FDEs and CIEs can be registered with the
DWARF unwinder. This allows us to unwind the stack through module code
when generating backtraces.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-10-11 16:41:44 +01:00
Paul Mundt
3d4e0cfb33 sh: Reinstate ILSEL -> IRL intc mappings for SH-X3 proto CPU.
In the multi-evt conversion for the SH-X3 proto CPU, IRLs were dropped
down to a single unique masking source, which ended up blowing up on
ILSEL-based IRQs which have special semantics that otherwise confuse the
intc code. While this does result in intc spewing about not having a
unique masking source, we don't really care.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 22:45:41 +09:00
Paul Mundt
2a8bc92345 sh: Shut up CONFIG_32BIT=n compiler warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 22:24:55 +09:00
Matt Fleming
20b5014b3e sh: Fold fixed-PMB support into dynamic PMB support
The initialisation process differs for CONFIG_PMB and for
CONFIG_PMB_FIXED. For CONFIG_PMB_FIXED we need to register the PMB
entries that were allocated by the bootloader.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:52:34 +09:00
Matt Fleming
ef269b3276 sh: Fix the offset from P1SEG/P2SEG where we map RAM
We need to map the gap between 0x00000000 and __MEMORY_START in the PMB,
as well as RAM.

With this change my 7785LCR board can switch to 32bit MMU mode at
runtime.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:52:26 +09:00
Matt Fleming
3105121949 sh: Remap physical memory into P1 and P2 in pmb_init()
Eventually we'll have complete control over what physical memory gets
mapped where and we can probably do other interesting things. For now
though, when the MMU is in 32-bit mode, we map physical memory into the
P1 and P2 virtual address ranges with the same semantics as they have in
29-bit mode.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:52:03 +09:00
Matt Fleming
edd7de803c sh: Get rid of the kmem cache code
Unfortunately, at the time during in boot when we want to be setting up
the PMB entries, the kmem subsystem hasn't been initialised.

We now match pmb_map slots with pmb_entry_list slots. When we find an
empty slot in pmb_map, we set the bit, thereby acquiring the
corresponding pmb_entry_list entry. There is a benefit in using this
static array of struct pmb_entry's; we don't need to acquire any locks
in order to traverse the list of struct pmb_entry's.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:47 +09:00
Matt Fleming
8386aebb9e sh: Make most PMB functions static
There's no need to export the internal PMB functions for allocating,
freeing and modifying PMB entries, etc. This way we can restrict the
interface for PMB.

Also remove the static from pmb_init() so that we have more freedom in
setting up the initial PMB entries and turning on MMU 32bit mode.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:37 +09:00
Matt Fleming
b336f124b1 sh: CONFIG_PMB doesn't mean the MMU is in 32bit mode
CONFIG_PMB will eventually allow the MMU to be switched between 29-bit
and 32-bit mode dynamically at runtime.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:23 +09:00
Matt Fleming
1f69b6af91 sh: Prepare for dynamic PMB support
To allow the MMU to be switched between 29bit and 32bit mode at runtime
some constants need to swapped for functions that return a runtime
value.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:12 +09:00
Matt Fleming
8bd642b17b sh: Obliterate the P1 area macros
Replace the use of PHYSADDR() with __pa(). PHYSADDR() is based on the
idea that all addresses in P1SEG are untranslated, so we can access an
address's physical page as an offset from P1SEG. This doesn't work for
CONFIG_PMB/CONFIG_PMB_FIXED because pages in P1SEG and P2SEG are used
for PMB mappings and so can be translated to any physical address.

Likewise, replace a P1SEGADDR() use with virt_to_phys().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:02 +09:00
Matt Fleming
067784f623 sh: Allocate PMB entry slot earlier
Simplify set_pmb_entry() by removing the possibility of not finding a
free slot in the PMB. Instead we now allocate a slot in pmb_alloc() so
that if there are no free slots we fail at allocation time, rather than
in set_pmb_entry().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:49:57 +09:00
Paul Mundt
5e3679c594 Merge branch 'sh/cachetlb' 2009-10-10 21:36:53 +09:00
Guennadi Liakhovetski
a469f627c1 SH: add support for the RJ54N1CB0C camera for the kfr2r09 platform
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:21:59 +09:00
Matt Fleming
a2767cfb1d sh: Don't allocate smaller sized mappings on every iteration
Currently, we've got the less than ideal situation where if we need to
allocate a 256MB mapping we'll allocate four entries like so,

	 entry 1: 128MB
	 entry 2:  64MB
	 entry 3:  16MB
	 entry 4:  16MB

This is because as we execute the loop in pmb_remap() we will
progressively try mapping the remaining address space with smaller and
smaller sizes. This isn't good because the size we use on one iteration
may be the perfect size to use on the next iteration, for instance when
the initial size is divisible by one of the PMB mapping sizes.

With this patch, we now only need two entries in the PMB to map 256MB of
address space,

	  entry 1: 128MB
	  entry 2: 128MB

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:26:35 +09:00
Matt Fleming
2bea7ea7d5 sh: Try PMB mapping based on physical address, not mapping size
We should favour PMB mappings when the physical address cannot be
reached with 29-bits.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:25:10 +09:00
Matt Fleming
fc2bdefdde sh: Plug PMB alloc memory leak
If we fail to allocate a PMB entry in pmb_remap() we must remember to
clear and free any PMB entries that we may have previously allocated,
e.g. if we were allocating a multiple entry mapping.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:24:09 +09:00
Matt Fleming
a6325247f5 sh: Sprinkle __uses_jump_to_uncached
Fix some callers of jump_to_uncached() and back_to_cached() that were
not annotated with __uses_jump_to_uncached.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:23:57 +09:00
Magnus Damm
f78bab3070 sh: enable sleep state LEDs on Ecovec24
Extend the ecovec24 board code to enable Power
Management LEDs showing the current sh7724 sleep state.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:14:21 +09:00
Kuninori Morimoto
9c472c4dd8 sh: mach-ecovec24: Document DS2 switch settings.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-05 10:59:22 +09:00
Lubomir Rintel
f16bf3e2e4 sh: Build fix: export __movmem
ERROR: "__movmem" [net/irda/irda.ko] undefined!
ERROR: "__movmem" [fs/nfsd/nfsd.ko] undefined!
ERROR: "__movmem" [fs/lockd/lockd.ko] undefined!
ERROR: "__movmem" [crypto/sha1_generic.ko] undefined!

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-30 15:41:42 +09:00
Paul Mundt
8406638ab0 sh: Disable unaligned kernel access printks by default.
Certain networking and USB workloads generate floods of these accesses,
so just disable it by default (thereby restoring the old behaviour). The
option remains configurable from userspace, and can still be used as a
debugging aid.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-30 14:02:42 +09:00
Kuninori Morimoto
d5ce010c03 sh: mach-ecovec24: modify 1st MTD area to read only
Tested-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-30 12:51:55 +09:00
Kuninori Morimoto
8810e0553f sh: mach-ecovec24: Add TouchScreen support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-30 12:51:50 +09:00
Paul Mundt
fe1dbfd3f9 sh: magicpanelr2 and dreamcast can use the generic I/O base.
There is now no need for the magicpanelr2 and dreamcast platforms to set
their own I/O port bas values, given that the generic machvec code now
sets this to P2SEG for everyone.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-28 15:22:10 +09:00
Matt Fleming
421f7a5dbd sh: Don't enable interrupts in the page fault path
There's already code in do_page_fault() to conditionally enable
interrupts, so we don't need to unconditonally enable them before
calling it. This fixes a lockdep warning where we called
trace_hardirqs_off() but with irqs still enabled.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-28 15:11:45 +09:00
Paul Mundt
d44ee12ad6 sh: Set the default I/O port base to P2SEG.
This bumps up the default I/O base to P2SEG, which allows legacy probing
to bail out gracefully rather than oopsing. Platforms that have a real
PIO offset still need to fix this up on their own, although most
platforms are content with P2SEG already.

The previous change to teach ioport_map() about >= P1SEG offsets in
combination with this patch allows both the already remapped and the
legacy address probing to pass through and succeed.

Fixes up an oops with i8042 on the sh7785lcr board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-28 15:05:41 +09:00
Paul Mundt
48ff3e04ff sh: Handle ioport_map() cases for >= P1SEG addresses.
This fixes up the case where certain drivers already do their own
remapping and subsequently attempt to use the PIO calls for I/O. In this
case there is no additional remapping that needs to be done, and the
address can be casted in to the cookie directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-28 15:04:04 +09:00
Nobuhiro Iwamatsu
ecb6fd5299 sh: Add support DMA Engine to SH7780
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-25 12:19:33 +09:00
Nobuhiro Iwamatsu
8255fff45b sh: Add support DMA Engine to SH7722
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-25 12:17:27 +09:00
Paul Mundt
c373ba9991 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-09-25 12:15:15 +09:00
Paul Mundt
6f3529f00a sh: enable onenand support in kfr2r09 defconfig.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-25 11:55:07 +09:00
Paul Mundt
5d65498b09 sh: update defconfigs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-25 11:53:02 +09:00
Kuninori Morimoto
3e9ad52b95 sh: add FSI driver support for ms7724se
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-25 11:04:36 +09:00