The driver pads non-double word multiple message sizes but it doesn't
account for this padding when the packet length is calculated. Also, the
data length is miscalculated for message sizes less than 4 bytes due to
the bit representation in LRH. And there's a check for non-double word
multiple message sizes that prevents these messages from being sent.
This patch fixes length miscalculations and enables the functionality to
send non-double word multiple message sizes.
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the write() handler for user space commands now that ioctl
handling is available. User apps will need to change to use ioctl from
this point forward.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IOCTL is more suited to what user space commands need to do than the
write() interface. Add IOCTL definitions for all existing write commands
and the handling for those. The write() interface will be removed in a
follow on patch.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The HFI1_CMD_SDMA_STATUS_UPD command was never implemented it has no
reason to live in the driver. Remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove EPROM handling from the cdev which is used for user application
data traffic.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hfi1 current exports a cdev that can be used to target all of the hfi's
in the system. However there is a problem with this approach in
that the devices could be on different subnets. This is a problem that
user space can figure out and explicitly tell the driver on which device
to create a context.
Remove the multi-purpose cdev leaving a dedicated cdev for each port.
Also remove the striping capability that is dependent upon the user
choosing the multi-purpose cdev. It is now up to user space to determine
how to stripe contexts.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit "flips the switch" on the TID caching feature
implemented in this patch series.
As well as enabling the new feature by tying the new function
with the PSM API, it also cleans up the old unneeded code,
data structure members, and variables.
Due to difference in operation and information, the tracing
functions related to expected receives had to be changed. This
patch include these changes.
The tracing function changes could not be split into a separate
commit without including both tracing variants at the same time.
This would have caused other complications and ugliness.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
TID caching will use a new event to signal userland that cache
invalidation has occurred and needs a matching command code that
will be used to read the invalidated TIDs.
Add the event bit and the new command to the exported header file.
The command is also added to the switch() statement in file_ops.c
for completeness and in preparation for its usage later.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The HFI1_CAP_TID_UNMAP comment was incorrectly implying the
opposite of what capability actually did. Correct this error.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a new EPROM partition, adjusting partition placement.
Add EPROM range commands as a supserset of the partition
commands. Remove old partition commands.
Enhance EPROM erase, creating a range function and using the
largest erase (sub) commands when possible.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for implementing Expected TID caching we do some simple clean up
of header file macros.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The QSFP interface code has been running without issues and the flag is
never set to off. This patch removes the QSFP_ENABLED bit from HFI1_CAP.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the hfi1 driver was added a user space header file (hfi1_user.h) was added
to be shared between PSM2 and the driver. However, the file was not added to
the header install. Add it now.
Fixes: d4ab347005 ("IB/core: Add core header changes needed for OPA")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the value of the CNP opcode to the existing list of enumerated
opcodes in ib_pack.h
Add common OPA header definitions for driver
build:
- opa_port_info.h
- opa_smi.h
- hfi1_user.h
Additionally, ib_mad.h, has additional definitions
that are common to ib_drivers including:
- trap support
- cca support
The qib driver has the duplication removed in favor
those in ib_mad.h
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: John, Jubin <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
