Report TCP socket state changes and accept failures via
tracepoints, replacing dprintk() call sites.
No tracepoint is added in svc_tcp_listen_data_ready. There's
no information available there that isn't also reported by the
svcsock_new_socket and the accept failure tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In addition to tracing recently-updated socket sendto events, this
commit adds a trace event class that can be used for additional
svcsock-related tracepoints in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Commit 850cbaddb5 ("udp: use it's own memory accounting
schema") removed the last skb-related tracepoint from svcsock.c, so
it is no longer necessary to include trace/events/skb.h.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In lieu of dprintks or tracepoints in each individual transport
implementation, introduce tracepoints in the generic part of the RPC
layer. These typically fire for connection lifetime events, so
shouldn't contribute a lot of noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Failure to accept a connection is typically due to a problem
specific to a transport type. Also, ->xpo_accept returns NULL
on error rather than reporting a specific problem.
So, add failure-specific tracepoints in svc_rdma_accept().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: After commit 1e091c3bbf ("svcrdma: Ignore source port
when computing DRC hash"), the IP address stored in xpt_remote
always has a port number of zero. Thus, there's no need to display
the port number when displaying the IP address of a remote NFS/RDMA
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Use a consistent naming convention so that these trace
points can be enabled quickly via a glob.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Way back when I was writing the RPC/RDMA server-side backchannel
code, I misread the TCP backchannel reply handler logic. When
svc_tcp_recvfrom() successfully receives a backchannel reply, it
does not return -EAGAIN. It sets XPT_DATA and returns zero.
Update svc_rdma_recvfrom() to return zero. Here, XPT_DATA doesn't
need to be set again: it is set whenever a new message is received,
behind a spin lock in a single threaded context.
Also, if handling the cb reply is not successful, the message is
simply dropped. There's no special message framing to deal with as
there is in the TCP case.
Now that the handle_bc_reply() return value is ignored, I've removed
the dprintk call sites in the error exit of handle_bc_reply() in
favor of trace points in other areas that already report the error
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Replace a dprintk call site.
This is the last remaining dprintk call site in svc_rdma_rw.c, so
remove dprintk infrastructure as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- De-duplicate code
- Rename the tracepoint with "_err" to allow enabling via glob
- Report the sg_cnt for the failing rw_ctx
- Fix a dumb signage issue
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It appears that the RPC/RDMA transport does not need serialization
of calls to its xpo_sendto method. Move the mutex into the socket
methods that still need that serialization.
Tail latencies are unambiguously better with this patch applied.
fio randrw 8KB 70/30 on NFSv3, smaller numbers are better:
clat percentiles (usec):
With xpt_mutex:
r | 99.99th=[ 8848]
w | 99.99th=[ 9634]
Without xpt_mutex:
r | 99.99th=[ 8586]
w | 99.99th=[ 8979]
Serializing the construction of RPC/RDMA transport headers is not
really necessary at this point, because the Linux NFS server
implementation never changes its credit grant on a connection. If
that should change, then svc_rdma_sendto will need to serialize
access to the transport's credit grant fields.
Reported-by: kbuild test robot <lkp@intel.com>
[ cel: fix uninitialized variable warning ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Highlights include:
Stable fixes:
- nfs: fix NULL deference in nfs4_get_valid_delegation
Bugfixes:
- Fix corruption of the return value in cachefiles_read_or_alloc_pages()
- Fix several fscache cookie issues
- Fix a fscache queuing race that can trigger a BUG_ON
- NFS: Fix 2 use-after-free regressions due to the RPC_TASK_CRED_NOREF flag
- SUNRPC: Fix a use-after-free regression in rpc_free_client_work()
- SUNRPC: Fix a race when tearing down the rpc client debugfs directory
- SUNRPC: Signalled ASYNC tasks need to exit
- NFSv3: fix rpc receive buffer size for MOUNT call
-----BEGIN PGP SIGNATURE-----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=lqFu
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.7-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- nfs: fix NULL deference in nfs4_get_valid_delegation
Bugfixes:
- Fix corruption of the return value in cachefiles_read_or_alloc_pages()
- Fix several fscache cookie issues
- Fix a fscache queuing race that can trigger a BUG_ON
- NFS: Fix two use-after-free regressions due to the RPC_TASK_CRED_NOREF flag
- SUNRPC: Fix a use-after-free regression in rpc_free_client_work()
- SUNRPC: Fix a race when tearing down the rpc client debugfs directory
- SUNRPC: Signalled ASYNC tasks need to exit
- NFSv3: fix rpc receive buffer size for MOUNT call"
* tag 'nfs-for-5.7-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv3: fix rpc receive buffer size for MOUNT call
SUNRPC: 'Directory with parent 'rpc_clnt' already present!'
NFS/pnfs: Don't use RPC_TASK_CRED_NOREF with pnfs
NFS: Don't use RPC_TASK_CRED_NOREF with delegreturn
SUNRPC: Signalled ASYNC tasks need to exit
nfs: fix NULL deference in nfs4_get_valid_delegation
SUNRPC: fix use-after-free in rpc_free_client_work()
cachefiles: Fix race between read_waiter and read_copier involving op->to_do
NFSv4: Fix fscache cookie aux_data to ensure change_attr is included
NFS: Fix fscache super_cookie allocation
NFS: Fix fscache super_cookie index_key from changing after umount
cachefiles: Fix corruption of the return value in cachefiles_read_or_alloc_pages()
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Each rpc_client has a cl_clid which is allocated from a global ida, and
a debugfs directory which is named after cl_clid.
We're releasing the cl_clid before we free the debugfs directory named
after it. As soon as the cl_clid is released, that value is available
for another newly created client.
That leaves a window where another client may attempt to create a new
debugfs directory with the same name as the not-yet-deleted debugfs
directory from the dying client. Symptoms are log messages like
Directory 4 with parent 'rpc_clnt' already present!
Fixes: 7c4310ff56 "SUNRPC: defer slow parts of rpc_free_client() to a workqueue."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When I cat parameter '/sys/module/sunrpc/parameters/pool_mode', it
displays as follows. It is better to add a newline for easy reading.
[root@hulk-202 ~]# cat /sys/module/sunrpc/parameters/pool_mode
global[root@hulk-202 ~]#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
- Resolve a data integrity problem with NFSD that I inadvertently
introduced last year. The change I made makes the NFS server's
duplicate reply cache ineffective when krb5i or krb5p are in use,
thus allowing the replay of non-idempotent NFS requests such as
RENAME, SETATTR, or even WRITEs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hT3x
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.7-rc-2' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull nfsd fixes from Chuck Lever:
"Resolve a data integrity problem with NFSD that I inadvertently
introduced last year.
The change I made makes the NFS server's duplicate reply cache
ineffective when krb5i or krb5p are in use, thus allowing the replay
of non-idempotent NFS requests such as RENAME, SETATTR, or even
WRITEs"
* tag 'nfsd-5.7-rc-2' of git://git.linux-nfs.org/projects/cel/cel-2.6:
SUNRPC: Revert 241b1f419f ("SUNRPC: Remove xdr_buf_trim()")
SUNRPC: Fix GSS privacy computation of auth->au_ralign
SUNRPC: Add "@len" parameter to gss_unwrap()
Ensure that signalled ASYNC rpc_tasks exit immediately instead of
spinning until a timeout (or forever).
To avoid checking for the signal flag on every scheduler iteration,
the check is instead introduced in the client's finite state
machine.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: ae67bd3821 ("SUNRPC: Fix up task signalling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Parts of rpc_free_client() were recently moved to
a separate rpc_free_clent_work(). This introduced
a use-after-free as rpc_clnt_remove_pipedir() calls
rpc_net_ns(), and that uses clnt->cl_xprt which has already
been freed.
So move the call to xprt_put() after the call to
rpc_clnt_remove_pipedir().
Reported-by: syzbot+22b5ef302c7c40d94ea8@syzkaller.appspotmail.com
Fixes: 7c4310ff56 ("SUNRPC: defer slow parts of rpc_free_client() to a workqueue.")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
commit 49b28684fd ("nfsd: Remove deprecated nfsctl system call and related code.")
left behind this, remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Highlights include:
Stable fixes
- fix handling of backchannel binding in BIND_CONN_TO_SESSION
Bugfixes
- Fix a credential use-after-free issue in pnfs_roc()
- Fix potential posix_acl refcnt leak in nfs3_set_acl
- defer slow parts of rpc_free_client() to a workqueue
- Fix an Oopsable race in __nfs_list_for_each_server()
- Fix trace point use-after-free race
- Regression: the RDMA client no longer responds to server disconnect requests
- Fix return values of xdr_stream_encode_item_{present, absent}
- _pnfs_return_layout() must always wait for layoutreturn completion
Cleanups
- Remove unreachable error conditions
-----BEGIN PGP SIGNATURE-----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=w0zk
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- fix handling of backchannel binding in BIND_CONN_TO_SESSION
Bugfixes:
- Fix a credential use-after-free issue in pnfs_roc()
- Fix potential posix_acl refcnt leak in nfs3_set_acl
- defer slow parts of rpc_free_client() to a workqueue
- Fix an Oopsable race in __nfs_list_for_each_server()
- Fix trace point use-after-free race
- Regression: the RDMA client no longer responds to server disconnect
requests
- Fix return values of xdr_stream_encode_item_{present, absent}
- _pnfs_return_layout() must always wait for layoutreturn completion
Cleanups:
- Remove unreachable error conditions"
* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race in __nfs_list_for_each_server()
NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
NFSv4: Remove unreachable error condition due to rpc_run_task()
SUNRPC: Remove unreachable error condition
xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
xprtrdma: Fix trace point use-after-free race
xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion
Bugfixes:
- Restore wake-up-all to rpcrdma_cm_event_handler()
- Otherwise the client won't respond to server disconnect requests
- Fix tracepoint use-after-free race
- Fix usage of xdr_stream_encode_item_{present, absent}
- These functions return a size on success, and not 0
-----BEGIN PGP SIGNATURE-----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=jre3
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-5.7-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFSoRDMA Client Fixes for Linux 5.7
Bugfixes:
- Restore wake-up-all to rpcrdma_cm_event_handler()
- Otherwise the client won't respond to server disconnect requests
- Fix tracepoint use-after-free race
- Fix usage of xdr_stream_encode_item_{present, absent}
- These functions return a size on success, and not 0
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The rpciod workqueue is on the write-out path for freeing dirty memory,
so it is important that it never block waiting for memory to be
allocated - this can lead to a deadlock.
rpc_execute() - which is often called by an rpciod work item - calls
rcp_task_release_client() which can lead to rpc_free_client().
rpc_free_client() makes two calls which could potentially block wating
for memory allocation.
rpc_clnt_debugfs_unregister() calls into debugfs and will block while
any of the debugfs files are being accessed. In particular it can block
while any of the 'open' methods are being called and all of these use
malloc for one thing or another. So this can deadlock if the memory
allocation waits for NFS to complete some writes via rpciod.
rpc_clnt_remove_pipedir() can take the inode_lock() and while it isn't
obvious that memory allocations can happen while the lock it held, it is
safer to assume they might and to not let rpciod call
rpc_clnt_remove_pipedir().
So this patch moves these two calls (together with the final kfree() and
rpciod_down()) into a work-item to be run from the system work-queue.
rpciod can continue its important work, and the final stages of the free
can happen whenever they happen.
I have seen this deadlock on a 4.12 based kernel where debugfs used
synchronize_srcu() when removing objects. synchronize_srcu() requires a
workqueue and there were no free workther threads and none could be
allocated. While debugsfs no longer uses SRCU, I believe the deadlock
is still possible.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler
methods to take kernel pointers instead. It gets rid of the set_fs address
space overrides used by BPF. As per discussion, pull in the feature branch
into bpf-next as it relates to BPF sysctl progs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
I've noticed that when krb5i or krb5p security is in use,
retransmitted requests are missing the server's duplicate reply
cache. The computed checksum on the retransmitted request does not
match the cached checksum, resulting in the server performing the
retransmitted request again instead of returning the cached reply.
The assumptions made when removing xdr_buf_trim() were not correct.
In the send paths, the upper layer has already set the segment
lengths correctly, and shorting the buffer's content is simply a
matter of reducing buf->len.
xdr_buf_trim() is the right answer in the receive/unwrap path on
both the client and the server. The buffer segment lengths have to
be shortened one-by-one.
On the server side in particular, head.iov_len needs to be updated
correctly to enable nfsd_cache_csum() to work correctly. The simple
buf->len computation doesn't do that, and that results in
checksumming stale data in the buffer.
The problem isn't noticed until there's significant instability of
the RPC transport. At that point, the reliability of retransmit
detection on the server becomes crucial.
Fixes: 241b1f419f ("SUNRPC: Remove xdr_buf_trim()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When the au_ralign field was added to gss_unwrap_resp_priv, the
wrong calculation was used. Setting au_rslack == au_ralign is
probably correct for kerberos_v1 privacy, but kerberos_v2 privacy
adds additional GSS data after the clear text RPC message.
au_ralign needs to be smaller than au_rslack in that fairly common
case.
When xdr_buf_trim() is restored to gss_unwrap_kerberos_v2(), it does
exactly what I feared it would: it trims off part of the clear text
RPC message. However, that's because rpc_prepare_reply_pages() does
not set up the rq_rcv_buf's tail correctly because au_ralign is too
large.
Fixing the au_ralign computation also corrects the alignment of
rq_rcv_buf->pages so that the client does not have to shift reply
data payloads after they are received.
Fixes: 35e77d21ba ("SUNRPC: Add rpc_auth::au_ralign field")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: This is a pre-requisite to fixing the client-side ralign
computation in gss_unwrap_resp_priv().
The length value is passed in explicitly rather that as the value
of buf->len. This will subsequently allow gss_unwrap_kerberos_v1()
to compute a slack and align value, instead of computing it in
gss_unwrap_resp_priv().
Fixes: 35e77d21ba ("SUNRPC: Add rpc_auth::au_ralign field")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
rpc_clnt_test_and_add_xprt() invokes rpc_call_null_helper(), which
return the value of rpc_run_task() to "task". Since rpc_run_task() is
impossible to return an ERR pointer, there is no need to add the
IS_ERR() condition on "task" here. So we need to remove it.
Fixes: 7f55489058 ("SUNRPC: Allow addition of new transports to a struct rpc_clnt")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
These new helpers do not return 0 on success, they return the
encoded size. Thus they are not a drop-in replacement for the
old helpers.
Fixes: 5c266df527 ("SUNRPC: Add encoders for list item discriminators")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It's not safe to use resources pointed to by the @send_wr of
ib_post_send() _after_ that function returns. Those resources are
typically freed by the Send completion handler, which can run before
ib_post_send() returns.
Thus the trace points currently around ib_post_send() in the
client's RPC/RDMA transport are a hazard, even when they are
disabled. Rearrange them so that they touch the Work Request only
_before_ ib_post_send() is invoked.
Fixes: ab03eff58e ("xprtrdma: Add trace points in RPC Call transmit paths")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from
rpcrdma_xprt") erroneously removed a xprt_force_disconnect()
call from the "transport disconnect" path. The result was that the
client no longer responded to server-side disconnect requests.
Restore that call.
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Utilize the xpo_release_rqst transport method to ensure that each
rqstp's svc_rdma_recv_ctxt object is released even when the server
cannot return a Reply for that rqstp.
Without this fix, each RPC whose Reply cannot be sent leaks one
svc_rdma_recv_ctxt. This is a 2.5KB structure, a 4KB DMA-mapped
Receive buffer, and any pages that might be part of the Reply
message.
The leak is infrequent unless the network fabric is unreliable or
Kerberos is in use, as GSS sequence window overruns, which result
in connection loss, are more common on fast transports.
Fixes: 3a88092ee3 ("svcrdma: Preserve Receive buffer until svc_rdma_sendto")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, after the forward channel connection goes away,
backchannel operations are causing soft lockups on the server
because call_transmit_status's SOFTCONN logic ignores ENOTCONN.
Such backchannel Calls are aggressively retried until the client
reconnects.
Backchannel Calls should use RPC_TASK_NOCONNECT rather than
RPC_TASK_SOFTCONN. If there is no forward connection, the server is
not capable of establishing a connection back to the client, thus
that backchannel request should fail before the server attempts to
send it. Commit 58255a4e3c ("NFSD: NFSv4 callback client should
use RPC_TASK_SOFTCONN") was merged several years before
RPC_TASK_NOCONNECT was available.
Because setup_callback_client() explicitly sets NOPING, the NFSv4.0
callback connection depends on the first callback RPC to initiate
a connection to the client. Thus NFSv4.0 needs to continue to use
RPC_TASK_SOFTCONN.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org> # v4.20+
Deleting list entry within hlist_for_each_entry_safe is not safe unless
next pointer (tmp) is protected too. It's not, because once hash_lock
is released, cache_clean may delete the entry that tmp points to. Then
cache_purge can walk to a deleted entry and tries to double free it.
Fix this bug by holding only the deleted entry's reference.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: NeilBrown <neilb@suse.de>
[ cel: removed unused variable ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Highlights include:
Stable fixes:
- Fix a page leak in nfs_destroy_unlinked_subrequests()
- Fix use-after-free issues in nfs_pageio_add_request()
- Fix new mount code constant_table array definitions
- finish_automount() requires us to hold 2 refs to the mount record
Features:
- Improve the accuracy of telldir/seekdir by using 64-bit cookies when
possible.
- Allow one RDMA active connection and several zombie connections to
prevent blocking if the remote server is unresponsive.
- Limit the size of the NFS access cache by default
- Reduce the number of references to credentials that are taken by NFS
- pNFS files and flexfiles drivers now support per-layout segment
COMMIT lists.
- Enable partial-file layout segments in the pNFS/flexfiles driver.
- Add support for CB_RECALL_ANY to the pNFS flexfiles layout type
- pNFS/flexfiles Report NFS4ERR_DELAY and NFS4ERR_GRACE errors from
the DS using the layouterror mechanism.
Bugfixes and cleanups:
- SUNRPC: Fix krb5p regressions
- Don't specify NFS version in "UDP not supported" error
- nfsroot: set tcp as the default transport protocol
- pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()
- alloc_nfs_open_context() must use the file cred when available
- Fix locking when dereferencing the delegation cred
- Fix memory leaks in O_DIRECT when nfs_get_lock_context() fails
- Various clean ups of the NFS O_DIRECT commit code
- Clean up RDMA connect/disconnect
- Replace zero-length arrays with C99-style flexible arrays
-----BEGIN PGP SIGNATURE-----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=YUcP
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a page leak in nfs_destroy_unlinked_subrequests()
- Fix use-after-free issues in nfs_pageio_add_request()
- Fix new mount code constant_table array definitions
- finish_automount() requires us to hold 2 refs to the mount record
Features:
- Improve the accuracy of telldir/seekdir by using 64-bit cookies
when possible.
- Allow one RDMA active connection and several zombie connections to
prevent blocking if the remote server is unresponsive.
- Limit the size of the NFS access cache by default
- Reduce the number of references to credentials that are taken by
NFS
- pNFS files and flexfiles drivers now support per-layout segment
COMMIT lists.
- Enable partial-file layout segments in the pNFS/flexfiles driver.
- Add support for CB_RECALL_ANY to the pNFS flexfiles layout type
- pNFS/flexfiles Report NFS4ERR_DELAY and NFS4ERR_GRACE errors from
the DS using the layouterror mechanism.
Bugfixes and cleanups:
- SUNRPC: Fix krb5p regressions
- Don't specify NFS version in "UDP not supported" error
- nfsroot: set tcp as the default transport protocol
- pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()
- alloc_nfs_open_context() must use the file cred when available
- Fix locking when dereferencing the delegation cred
- Fix memory leaks in O_DIRECT when nfs_get_lock_context() fails
- Various clean ups of the NFS O_DIRECT commit code
- Clean up RDMA connect/disconnect
- Replace zero-length arrays with C99-style flexible arrays"
* tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (86 commits)
NFS: Clean up process of marking inode stale.
SUNRPC: Don't start a timer on an already queued rpc task
NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn()
NFS/pnfs: Fix dereference of layout cred in pnfs_layoutcommit_inode()
NFS: Beware when dereferencing the delegation cred
NFS: Add a module parameter to set nfs_mountpoint_expiry_timeout
NFS: finish_automount() requires us to hold 2 refs to the mount record
NFS: Fix a few constant_table array definitions
NFS: Try to join page groups before an O_DIRECT retransmission
NFS: Refactor nfs_lock_and_join_requests()
NFS: Reverse the submission order of requests in __nfs_pageio_add_request()
NFS: Clean up nfs_lock_and_join_requests()
NFS: Remove the redundant function nfs_pgio_has_mirroring()
NFS: Fix memory leaks in nfs_pageio_stop_mirroring()
NFS: Fix a request reference leak in nfs_direct_write_clear_reqs()
NFS: Fix use-after-free issues in nfs_pageio_add_request()
NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()
NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()
NFS: Remove unused FLUSH_SYNC support in nfs_initiate_pgio()
pNFS/flexfiles: Specify the layout segment range in LAYOUTGET
...
Move the test for whether a task is already queued to prevent
corruption of the timer list in __rpc_sleep_on_priority_timeout().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
New Features:
- Allow one active connection and several zombie connections to prevent
blocking if the remote server is unresponsive.
Bugfixes and Cleanups:
- Enhance MR-related trace points
- Refactor connection set-up and disconnect functions
- Make Protection Domains per-connection instead of per-transport
- Merge struct rpcrdma_ia into rpcrdma_ep
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAl5+GKEACgkQ18tUv7Cl
QOvJVBAA4MNSvzo0856X414uUMe1YK1HXblqYbNWSe0bRsfaakp8mscMFmd4/IuG
YSOlQPYcTErdfeEelS1ayMZA3qy5Ke62hKFFfv0fk11lN3VoT4XPiIqY6Ry2OJaR
7XoYyH3YKJxgqOYhQwSo4rvFRNtPKbvEtcQn8uLXnMclomlZ1mli4F9rYs23SvLL
Jbq1q/SKx0w+GAOUj418dYLjMnQU7L+TotplTBGzE7mkhBR0JarBiKZfLxbg2/md
Fva1EwY4Tgef+4ofVr5KP8raGVGl6zy8TIZezlijeUv4rmk9JudrYjeUNqyCWufw
ffkrM+wPr8kQViQoei5ByEvVG2pQK9nfxccx6rxiIOoG8Mb1aK8Wh75e2kjfZZeY
bsEx8wSfRvI54ukk/NfGpP21OP1DDKU4ET6hsW+b6onqmDfYPZ/LinUvrvIHietQ
IsMOG+QE+G1mXFiQR1P9dZcIwTNvE/SyUoaykbeslcYCkQt5yEk25UK+38TornbV
hBxrm9KBd25RUu8prFJadmLBjPx3tLLd451xxppCyrIlpw0b+Q4yHlF7Jr75DYBT
xjW5Xpr6tJZuoybbSyT9B/tiV4gIfyJZCU5S95nFlluKZ0gQd2jIGj/JagNWppke
XSEqRR/Ja0OnB7yDz60gQrrZnjw/Em2jx7xbHIXFK+rs45dkdFc=
=piIM
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-5.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFSoRDMA Client Updates for Linux 5.7
New Features:
- Allow one active connection and several zombie connections to prevent
blocking if the remote server is unresponsive.
Bugfixes and Cleanups:
- Enhance MR-related trace points
- Refactor connection set-up and disconnect functions
- Make Protection Domains per-connection instead of per-transport
- Merge struct rpcrdma_ia into rpcrdma_ep
'maxlen' is the total size of the destination buffer. There is only one
caller and this value is 256.
When we compute the size already used and what we would like to add in
the buffer, the trailling NULL character is not taken into account.
However, this trailling character will be added by the 'strcat' once we
have checked that we have enough place.
So, there is a off-by-one issue and 1 byte of the stack could be
erroneously overwridden.
Take into account the trailling NULL, when checking if there is enough
place in the destination buffer.
While at it, also replace a 'sprintf' by a safer 'snprintf', check for
output truncation and avoid a superfluous 'strlen'.
Fixes: dc9a16e49d ("svc: Add /proc/sys/sunrpc/transport files")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ cel: very minor fix to documenting comment
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Change the rpcrdma_xprt_disconnect() function so that it no longer
waits for the DISCONNECTED event. This prevents blocking if the
remote is unresponsive.
In rpcrdma_xprt_disconnect(), the transport's rpcrdma_ep is
detached. Upon return from rpcrdma_xprt_disconnect(), the transport
(r_xprt) is ready immediately for a new connection.
The RDMA_CM_DEVICE_REMOVAL and RDMA_CM_DISCONNECTED events are now
handled almost identically.
However, because the lifetimes of rpcrdma_xprt structures and
rpcrdma_ep structures are now independent, creating an rpcrdma_ep
needs to take a module ref count. The ep now owns most of the
hardware resources for a transport.
Also, a kref is needed to ensure that rpcrdma_ep sticks around
long enough for the cm_event_handler to finish.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_cm_event_handler() is always passed an @id pointer that is
valid. However, in a subsequent patch, we won't be able to extract
an r_xprt in every case. So instead of using the r_xprt's
presentation address strings, extract them from struct rdma_cm_id.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I eventually want to allocate rpcrdma_ep separately from struct
rpcrdma_xprt so that on occasion there can be more than one ep per
xprt.
The new struct rpcrdma_ep will contain all the fields currently in
rpcrdma_ia and in rpcrdma_ep. This is all the device and CM settings
for the connection, in addition to per-connection settings
negotiated with the remote.
Take this opportunity to rename the existing ep fields from rep_* to
re_* to disambiguate these from struct rpcrdma_rep.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Completion errors after a disconnect often occur much sooner than a
CM_DISCONNECT event. Use this to try to detect connection loss more
quickly.
Note that other kernel ULPs do take care to disconnect explicitly
when a WR is flushed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up:
The upper layer serializes calls to xprt_rdma_close, so there is no
need for an atomic bit operation, saving 8 bytes in rpcrdma_ia.
This enables merging rpcrdma_ia_remove directly into the disconnect
logic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move rdma_cm_id creation into rpcrdma_ep_create() so that it is now
responsible for allocating all per-connection hardware resources.
With this clean-up, all three arms of the switch statement in
rpcrdma_ep_connect are exactly the same now, thus the switch can be
removed.
Because device removal behaves a little differently than
disconnection, there is a little more work to be done before
rpcrdma_ep_destroy() can release the connection's rdma_cm_id. So
it is not quite symmetrical with rpcrdma_ep_create() yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make a Protection Domain (PD) a per-connection resource rather than
a per-transport resource. In other words, when the connection
terminates, the PD is destroyed.
Thus there is one less HW resource that remains allocated to a
transport after a connection is closed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Simplify the synopses of functions in the connect and
disconnect paths in preparation for combining the rpcrdma_ia and
struct rpcrdma_ep structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Simplify the synopses of functions in the post_send path
by combining the struct rpcrdma_ia and struct rpcrdma_ep arguments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: prepare for combining the rpcrdma_ia and rpcrdma_ep
structures. Take the opportunity to rename the function to be
consistent with the "subsystem _ object _ verb" naming scheme.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor rpcrdma_ep_create(), rpcrdma_ep_disconnect(), and
rpcrdma_ep_destroy().
rpcrdma_ep_create will be invoked at connect time instead of at
transport set-up time. It will be responsible for allocating per-
connection resources. In this patch it allocates the CQs and
creates a QP. More to come.
rpcrdma_ep_destroy() is the inverse functionality that is
invoked at disconnect time. It will be responsible for releasing
the CQs and QP.
These changes should be safe to do because both connect and
disconnect is guaranteed to be serialized by the transport send
lock.
This takes us another step closer to resolving the address and route
only at connect time so that connection failover to another device
will work correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Two changes:
- Show the number of SG entries that were mapped. This helps debug
DMA-related problems.
- Record the MR's resource ID instead of its memory address. This
groups each MR with its associated rdma-tool output, and reduces
needless exposure of memory addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ever since commit 2c94b8eca1 ("SUNRPC: Use au_rslack when computing
reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It
used to use au_cslack value which was nice and large and changed it to
au_rslack value which turns out to be too small.
Since 5.1, v3 mount with sec=krb5p fails against an Ontap server
because client's receive buffer it too small.
For gss krb5p, we need to account for the mic token in the verifier,
and the wrap token in the wrap token.
RFC 4121 defines:
mic token
Octet no Name Description
--------------------------------------------------------------
0..1 TOK_ID Identification field. Tokens emitted by
GSS_GetMIC() contain the hex value 04 04
expressed in big-endian order in this
field.
2 Flags Attributes field, as described in section
4.2.2.
3..7 Filler Contains five octets of hex value FF.
8..15 SND_SEQ Sequence number field in clear text,
expressed in big-endian order.
16..last SGN_CKSUM Checksum of the "to-be-signed" data and
octet 0..15, as described in section 4.2.4.
that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum
wrap token
Octet no Name Description
--------------------------------------------------------------
0..1 TOK_ID Identification field. Tokens emitted by
GSS_Wrap() contain the hex value 05 04
expressed in big-endian order in this
field.
2 Flags Attributes field, as described in section
4.2.2.
3 Filler Contains the hex value FF.
4..5 EC Contains the "extra count" field, in big-
endian order as described in section 4.2.3.
6..7 RRC Contains the "right rotation count" in big-
endian order, as described in section
4.2.5.
8..15 SND_SEQ Sequence number field in clear text,
expressed in big-endian order.
16..last Data Encrypted data for Wrap tokens with
confidentiality, or plaintext data followed
by the checksum for Wrap tokens without
confidentiality, as described in section
4.2.4.
Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum
(other things like padding)
RFC 3961 defines known cksum sizes:
Checksum type sumtype checksum section or
value size reference
---------------------------------------------------------------------
CRC32 1 4 6.1.3
rsa-md4 2 16 6.1.2
rsa-md4-des 3 24 6.2.5
des-mac 4 16 6.2.7
des-mac-k 5 8 6.2.8
rsa-md4-des-k 6 16 6.2.6
rsa-md5 7 16 6.1.1
rsa-md5-des 8 24 6.2.4
rsa-md5-des3 9 24 ??
sha1 (unkeyed) 10 20 ??
hmac-sha1-des3-kd 12 20 6.3
hmac-sha1-des3 13 20 ??
sha1 (unkeyed) 14 20 ??
hmac-sha1-96-aes128 15 20 [KRB5-AES]
hmac-sha1-96-aes256 16 20 [KRB5-AES]
[reserved] 0x8003 ? [GSS-KRB5]
Linux kernel now mainly supports type 15,16 so max cksum size is 20bytes.
(GSS_KRB5_MAX_CKSUM_LEN)
Re-use already existing define of GSS_KRB5_MAX_SLACK_NEEDED that's used
for encoding the gss_wrap tokens (same tokens are used in reply).
Fixes: 2c94b8eca1 ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the cache entry never gets initialised, we want the garbage
collector to be able to evict it. Otherwise if the upcall daemon
fails to initialise the entry, we end up never expiring it.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[ cel: resolved a merge conflict ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If the rpc.mountd daemon goes down, then that should not cause all
exports to start failing with ESTALE errors. Let's explicitly
distinguish between the cache upcall cases that need to time out,
and those that do not.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
xprt_sock_sendmsg uses the more efficient iov_iter-enabled kernel
socket API, and is a pre-requisite for server send-side support for
TLS.
Note that svc_process no longer needs to reserve a word for the
stream record marker, since the TCP transport now provides the
record marker automatically in a separate buffer.
The dprintk() in svc_send_common is also removed. It didn't seem
crucial for field troubleshooting. If more is needed there, a trace
point could be added in xprt_sock_sendmsg().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
On some platforms, DMA mapping part of a page is more costly than
copying bytes. Indeed, not involving the I/O MMU can help the
RPC/RDMA transport scale better for tiny I/Os across more RDMA
devices. This is because interaction with the I/O MMU is eliminated
for each of these small I/Os. Without the explicit unmapping, the
NIC no longer needs to do a costly internal TLB shoot down for
buffers that are just a handful of bytes.
Since pull-up is now a more a frequent operation, I've introduced a
trace point in the pull-up path. It can be used for debugging or
user-space tools that count pull-up frequency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Performance optimization: Avoid syncing the transport buffer twice
when Reply buffer pull-up is necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Same idea as the receive-side changes I did a while back: use
xdr_stream helpers rather than open-coding the XDR chunk list
encoders. This builds the Reply transport header from beginning to
end without backtracking.
As additional clean-ups, fill in documenting comments for the XDR
encoders and sprinkle some trace points in the new encoding
functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. These are taken from the client-side RPC/RDMA transport
to a more global header file so they can be used elsewhere.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
These trace points are misnamed:
trace_svcrdma_encode_wseg
trace_svcrdma_encode_write
trace_svcrdma_encode_reply
trace_svcrdma_encode_rseg
trace_svcrdma_encode_read
trace_svcrdma_encode_pzr
Because they actually trace posting on the Send Queue. Let's rename
them so that I can add trace points in the chunk list encoders that
actually do trace chunk list encoding events.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Preparing for subsequent patches, no behavior change expected.
Pass the RPC Call's svc_rdma_recv_ctxt deeper into the sendto()
path. This enables passing more information about Requester-
provided Write and Reply chunks into those lower-level functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Preparing for subsequent patches, no behavior change expected.
Pass the RPC Call's svc_rdma_recv_ctxt deeper into the sendto()
path. This enables passing more information about Requester-
provided Write and Reply chunks into those lower-level functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Preparing for subsequent patches, no behavior change expected.
Pass the RPC Call's svc_rdma_recv_ctxt deeper into the sendto()
path. This enables passing more information about Requester-
provided Write and Reply chunks into the lower-level send
functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cache the locations of the Requester-provided Write list and Reply
chunk so that the Send path doesn't need to parse the Call header
again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The logic that checks incoming network headers has to be scrupulous.
De-duplicate: replace open-coded buffer overflow checks with the use
of xdr_stream helpers that are used most everywhere else XDR
decoding is done.
One minor change to the sanity checks: instead of checking the
length of individual segments, cap the length of the whole chunk
to be sure it can fit in the set of pages available in rq_pages.
This should be a better test of whether the server can handle the
chunks in each request.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. This trace point is no longer needed because the RDMA/core
CMA code has an equivalent trace point that was added by commit
ed999f820a ("RDMA/cma: Add trace points in RDMA Connection
Manager").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This class can be used to create trace points in either the RPC
client or RPC server paths. It simply displays the length of each
part of an xdr_buf, which is useful to determine that the transport
and XDR codecs are operating correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Introduce a helper function to compute the XDR pad size of a
variable-length XDR object.
Clean up: Replace open-coded calculation of XDR pad sizes.
I'm sure I haven't found every instance of this calculation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This error path is almost never executed. Found by code inspection.
Fixes: 99722fe4d5 ("svcrdma: Persistently allocate and DMA-map Send buffers")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svcrdma expects that the payload falls precisely into the xdr_buf
page vector. This does not seem to be the case for
nfsd4_encode_readv().
This code is called only when fops->splice_read is missing or when
RQ_SPLICE_OK is clear, so it's not a noticeable problem in many
common cases.
Add new transport method: ->xpo_read_payload so that when a READ
payload does not fit exactly in rq_res's page vector, the XDR
encoder can inform the RPC transport exactly where that payload is,
without the payload's XDR pad.
That way, when a Write chunk is present, the transport knows what
byte range in the Reply message is supposed to be matched with the
chunk.
Note that the Linux NFS server implementation of NFS/RDMA can
currently handle only one Write chunk per RPC-over-RDMA message.
This simplifies the implementation of this fix.
Fixes: b042098063 ("nfsd4: allow exotic read compounds")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198053
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
detail->hash_table[] is traversed using hlist_for_each_entry_rcu
outside an RCU read-side critical section but under the protection
of detail->hash_lock.
Hence, add corresponding lockdep expression to silence false-positive
warnings, and harden RCU lists.
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
By preventing compiler inlining of the integrity and privacy
helpers, stack utilization for the common case (authentication only)
goes way down.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: this function is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
xdr_buf_read_mic() tries to find unused contiguous space in a
received xdr_buf in order to linearize the checksum for the call
to gss_verify_mic. However, the corner cases in this code are
numerous and we seem to keep missing them. I've just hit yet
another buffer overrun related to it.
This overrun is at the end of xdr_buf_read_mic():
1284 if (buf->tail[0].iov_len != 0)
1285 mic->data = buf->tail[0].iov_base + buf->tail[0].iov_len;
1286 else
1287 mic->data = buf->head[0].iov_base + buf->head[0].iov_len;
1288 __read_bytes_from_xdr_buf(&subbuf, mic->data, mic->len);
1289 return 0;
This logic assumes the transport has set the length of the tail
based on the size of the received message. base + len is then
supposed to be off the end of the message but still within the
actual buffer.
In fact, the length of the tail is set by the upper layer when the
Call is encoded so that the end of the tail is actually the end of
the allocated buffer itself. This causes the logic above to set
mic->data to point past the end of the receive buffer.
The "mic->data = head" arm of this if statement is no less fragile.
As near as I can tell, this has been a problem forever. I'm not sure
that minimizing au_rslack recently changed this pathology much.
So instead, let's use a more straightforward approach: kmalloc a
separate buffer to linearize the checksum. This is similar to
how gss_validate() currently works.
Coming back to this code, I had some trouble understanding what
was going on. So I've cleaned up the variable naming and added
a few comments that point back to the XDR definition in RFC 2203
to help guide future spelunkers, including myself.
As an added clean up, the functionality that was in
xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(),
as that is its only caller.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The variable status is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a flag to signal to the RPC layer that the credential is already
pinned for the duration of the RPC call.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The @nents value that was passed to ib_dma_map_sg() has to be passed
to the matching ib_dma_unmap_sg() call. If ib_dma_map_sg() choses to
concatenate sg entries, it will return a different nents value than
it was passed.
The bug was exposed by recent changes to the AMD IOMMU driver, which
enabled sg entry concatenation.
Looking all the way back to commit 4143f34e01 ("xprtrdma: Port to
new memory registration API") and reviewing other kernel ULPs, it's
not clear that the frwr_map() logic was ever correct for this case.
Reported-by: Andre Tomt <andre@tomt.net>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Server-to-server copy code from Olga. To use it, client and
both servers must have support, the target server must be able
to access the source server over NFSv4.2, and the target
server must have the inter_copy_offload_enable module
parameter set.
- Improvements and bugfixes for the new filehandle cache,
especially in the container case, from Trond
- Also from Trond, better reporting of write errors.
- Y2038 work from Arnd.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEYtFWavXG9hZotryuJ5vNeUKO4b4FAl490mAVHGJmaWVsZHNA
ZmllbGRzZXMub3JnAAoJECebzXlCjuG+HkkP/33CsYXp0wvfNrfxCY3zHRxHpfw+
T9Ownxxw0RAJc/dRluC/2PIKJ20uVqtLrplU63bMBqJn84WF7OALq9twZ79a3fVF
mvdmnZbNq9B3ncKJlT7akkEelyJCRap7NgG/oTyubE8MlPl6gKpD8c+G7XdW/uN+
r0fprQz4rW4CYCBGSHq7HusEKqY4Gw+gbyAfJ6A79TMjF1ei51PG+9c8rkIsI5CO
1TQ3gY1gSJmGf2DoF86Q9WTVb+DvRTEs+t7QkxY/Vlo+QXY8CZyu+qSxN7i/F20m
gv2GrSpQMS9DEK/ZaG6cxaH+sM18Db4KLvcl3koL6lONHDR2OafSdKLyy0I60jhO
WfDSHhfDCrAdASTjNlTPrjBrdK3gafiaJVL9vy901ZJjPaNb3EH0nMQ5bEvOBECq
TCqPcQUcbku+qUVIcFwzSK1hXQFQHNh8WIuqXvNviZIzFDoipwsHVnQK02Owj89L
R2tbZue1O8voacg/9xw3tWAT7pI+SaBb0EvJuqRxBshiZEU8kKKtMchOwSECRDcu
k4lcqC5EFW7e4EzGlr6Wx8sI5lwCapva8ccjmPXX+R/vyM81oxWGB84GqWjjwubH
3Fcok23F9rW2IQJkqgPlNj/9hAjTn2+vM13UbfMlnchGNsQ2gbkc5CDGC/J6Wwpo
tHVristV9Gu5bJym
=FxLY
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Server-to-server copy code from Olga.
To use it, client and both servers must have support, the target
server must be able to access the source server over NFSv4.2, and
the target server must have the inter_copy_offload_enable module
parameter set.
- Improvements and bugfixes for the new filehandle cache, especially
in the container case, from Trond
- Also from Trond, better reporting of write errors.
- Y2038 work from Arnd"
* tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux: (55 commits)
sunrpc: expiry_time should be seconds not timeval
nfsd: make nfsd_filecache_wq variable static
nfsd4: fix double free in nfsd4_do_async_copy()
nfsd: convert file cache to use over/underflow safe refcount
nfsd: Define the file access mode enum for tracing
nfsd: Fix a perf warning
nfsd: Ensure sampling of the write verifier is atomic with the write
nfsd: Ensure sampling of the commit verifier is atomic with the commit
sunrpc: clean up cache entry add/remove from hashtable
sunrpc: Fix potential leaks in sunrpc_cache_unhash()
nfsd: Ensure exclusion between CLONE and WRITE errors
nfsd: Pass the nfsd_file as arguments to nfsd4_clone_file_range()
nfsd: Update the boot verifier on stable writes too.
nfsd: Fix stable writes
nfsd: Allow nfsd_vfs_write() to take the nfsd_file as an argument
nfsd: Fix a soft lockup race in nfsd_file_mark_find_or_create()
nfsd: Reduce the number of calls to nfsd_file_gc()
nfsd: Schedule the laundrette regularly irrespective of file errors
nfsd: Remove unused constant NFSD_FILE_LRU_RESCAN
nfsd: Containerise filecache laundrette
...
Stable bugfixes:
- Fix memory leaks and corruption in readdir # v2.6.37+
- Directory page cache needs to be locked when read # v2.6.37+
New features:
- Convert NFS to use the new mount API
- Add "softreval" mount option to let clients use cache if server goes down
- Add a config option to compile without UDP support
- Limit the number of inactive delegations the client can cache at once
- Improved readdir concurrency using iterate_shared()
Other bugfixes and cleanups:
- More 64-bit time conversions
- Add additional diagnostic tracepoints
- Check for holes in swapfiles, and add dependency on CONFIG_SWAP
- Various xprtrdma cleanups to prepare for 5.7's changes
- Several fixes for NFS writeback and commit handling
- Fix acls over krb5i/krb5p mounts
- Recover from premature loss of openstateids
- Fix NFS v3 chacl and chmod bug
- Compare creds using cred_fscmp()
- Use kmemdup_nul() in more places
- Optimize readdir cache page invalidation
- Lease renewal and recovery fixes
-----BEGIN PGP SIGNATURE-----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=b6+F
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Puyll NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Fix memory leaks and corruption in readdir # v2.6.37+
- Directory page cache needs to be locked when read # v2.6.37+
New features:
- Convert NFS to use the new mount API
- Add "softreval" mount option to let clients use cache if server goes down
- Add a config option to compile without UDP support
- Limit the number of inactive delegations the client can cache at once
- Improved readdir concurrency using iterate_shared()
Other bugfixes and cleanups:
- More 64-bit time conversions
- Add additional diagnostic tracepoints
- Check for holes in swapfiles, and add dependency on CONFIG_SWAP
- Various xprtrdma cleanups to prepare for 5.7's changes
- Several fixes for NFS writeback and commit handling
- Fix acls over krb5i/krb5p mounts
- Recover from premature loss of openstateids
- Fix NFS v3 chacl and chmod bug
- Compare creds using cred_fscmp()
- Use kmemdup_nul() in more places
- Optimize readdir cache page invalidation
- Lease renewal and recovery fixes"
* tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (93 commits)
NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewals
NFSv4: try lease recovery on NFS4ERR_EXPIRED
NFS: Fix memory leaks
nfs: optimise readdir cache page invalidation
NFS: Switch readdir to using iterate_shared()
NFS: Use kmemdup_nul() in nfs_readdir_make_qstr()
NFS: Directory page cache pages need to be locked when read
NFS: Fix memory leaks and corruption in readdir
SUNRPC: Use kmemdup_nul() in rpc_parse_scope_id()
NFS: Replace various occurrences of kstrndup() with kmemdup_nul()
NFSv4: Limit the total number of cached delegations
NFSv4: Add accounting for the number of active delegations held
NFSv4: Try to return the delegation immediately when marked for return on close
NFS: Clear NFS_DELEGATION_RETURN_IF_CLOSED when the delegation is returned
NFSv4: nfs_inode_evict_delegation() should set NFS_DELEGATION_RETURNING
NFS: nfs_find_open_context() should use cred_fscmp()
NFS: nfs_access_get_cached_rcu() should use cred_fscmp()
NFSv4: pnfs_roc() must use cred_fscmp() to compare creds
NFS: remove unused macros
nfs: Return EINVAL rather than ERANGE for mount parse errors
...
When upcalling gssproxy, cache_head.expiry_time is set as a
timeval, not seconds since boot. As such, RPC cache expiry
logic will not clean expired objects created under
auth.rpcsec.context cache.
This has proven to cause kernel memory leaks on field. Using
64 bit variants of getboottime/timespec
Expiration times have worked this way since 2010's c5b29f885a "sunrpc:
use seconds since boot in expiry cache". The gssproxy code introduced
in 2012 added gss_proxy_save_rsc and introduced the bug. That's a while
for this to lurk, but it required a bit of an extreme case to make it
obvious.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 030d794bf4 "SUNRPC: Use gssproxy upcall for server..."
Tested-By: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Using kmemdup_nul() is more efficient when the length is known.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These are updates to device drivers and file systems that for some reason
or another were not included in the kernel in the previous y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the now
unused time_t/timeval/timespec types and helper functions after all five
branches are merged for linux-5.6, ensuring that no new users get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1], should
be the first release that can serve as a base for a 32-bit system designed
to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along with
installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to be
ported to use the time64 syscalls added in linux-5.1 in place of the
existing system calls. This impacts most users of futex() and seccomp()
as well as programming languages that have their own runtime environment
not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit time_t
in a compatible way, so they must be configured to use CLOCK_MONOTONIC
times or (with a y2106 problem) unsigned 32-bit timestamps. Most
importantly this impacts all users of 'struct input_event'.
- All y2038 problems that are present on 64-bit machines also apply to
32-bit machines. In particular this affects file systems with on-disk
timestamps using signed 32-bit seconds: ext4 with ext3-style small
inodes, ext2, xfs (to be fixed soon) and ufs.
Changes since v1 [2]:
- Add Acks I received
- Rebase to v5.5-rc1, dropping patches that got merged already
- Add NFS, XFS and the final three patches from another series
- Rewrite etnaviv patches
- Add one late revert to avoid an etnaviv regression
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
[2] https://lore.kernel.org/lkml/20191108213257.3097633-1-arnd@arndb.de/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wx0A
-----END PGP SIGNATURE-----
Merge tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 updates from Arnd Bergmann:
"Core, driver and file system changes
These are updates to device drivers and file systems that for some
reason or another were not included in the kernel in the previous
y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the
now unused time_t/timeval/timespec types and helper functions after
all five branches are merged for linux-5.6, ensuring that no new users
get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1],
should be the first release that can serve as a base for a 32-bit
system designed to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along
with installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to
be ported to use the time64 syscalls added in linux-5.1 in place of
the existing system calls. This impacts most users of futex() and
seccomp() as well as programming languages that have their own
runtime environment not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and
linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit
time_t in a compatible way, so they must be configured to use
CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit
timestamps. Most importantly this impacts all users of 'struct
input_event'.
- All y2038 problems that are present on 64-bit machines also apply
to 32-bit machines. In particular this affects file systems with
on-disk timestamps using signed 32-bit seconds: ext4 with
ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs"
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
* tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits)
Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC"
y2038: sh: remove timeval/timespec usage from headers
y2038: sparc: remove use of struct timex
y2038: rename itimerval to __kernel_old_itimerval
y2038: remove obsolete jiffies conversion functions
nfs: fscache: use timespec64 in inode auxdata
nfs: fix timstamp debug prints
nfs: use time64_t internally
sunrpc: convert to time64_t for expiry
drm/etnaviv: avoid deprecated timespec
drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC
drm/msm: avoid using 'timespec'
hfs/hfsplus: use 64-bit inode timestamps
hostfs: pass 64-bit timestamps to/from user space
packet: clarify timestamp overflow
tsacct: add 64-bit btime field
acct: stop using get_seconds()
um: ubd: use 64-bit time_t where possible
xtensa: ISS: avoid struct timeval
dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD
...
When we unhash the cache entry, we need to handle any pending upcalls
by calling cache_fresh_unlocked().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove gss_mech_list_pseudoflavors() and its callers. This is part of
an unused API, and could leak an RCU reference if it were ever called.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This simplifies the logic in rpcrdma_post_recvs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To safely get rid of all rpcrdma_reps from a particular connection
instance, xprtrdma has to wait until each of those reps is finished
being used. A rep may be backing the rq_rcv_buf of an RPC that has
just completed, for example.
Since it is safe to invoke rpcrdma_rep_destroy() only in the Receive
completion handler, simply mark reps remaining in the rb_all_reps
list after the transport is drained. These will then be deleted as
rpcrdma_post_recvs pulls them off the rep free list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This reduces the hardware and memory footprint of an unconnected
transport.
At some point in the future, transport reconnect will allow
resolving the destination IP address through a different device. The
current change enables reps for the new connection to be allocated
on whichever NUMA node the new device affines to after a reconnect.
Note that this does not destroy _all_ the transport's reps... there
will be a few that are still part of a running RPC completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
