omapdss_is_initialized() is used to find out if omapdss has been probed
successfully. This patch moves the related code to the common
omapdss-base module, so that the same support will be there for both
omapdss and omapdss6.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are working towards enabling omapdss6, which will consists of a new
dss, dispc and dpi drivers. omapdss6 will be a new module. The panel,
encoder and omapdrm will need to use either the current omapdss driver
or the new omapdss6 driver, depending on the platform.
This will be implemented with a common base module and function
pointers.
This patch adds a skeleton omapdss-base.ko module, to which we'll be
moving common dss functionality like registration of the panels.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
While implementing writeback support, odd behavior of WBDELAYCOUNT was
observed with the combination of WB capture and HDMI. The result of the
debugging was that the HDMI sync polarities are not set correctly.
The current code sets the sync polarities going from HDMI WP to DISPC
according to the video mode used, which seems to work normally fine, but
causes problems with WB as WB expects the syncs to be active-high.
This patch changes the HDMI sync polarities so that the DISPC always
gets active-high syncs from HDMI WP, and the HDMI core gets sync
polarities according to the used video mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add support for render nodes in omap driver and allow required
ioctls to be accessible via render nodes.
This enables unprivileged clients to allocate resources like GEM buffers
for rendering their content into. Mode setting (KMS ioctls) is not
allowed using render nodes. These buffers are then shared with
a previleged process (e.g compositor) that has mode setting access.
An example of this use case is Android where the hardware composer is
the only master and has mode setting access. Every other client then
uses render node(e.g /dev/dri/renderD128 to allocate and use its buffers.
Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The clock source selection for the LCD outputs is too hardcoded at the
moment. For example, LCD3 is set to use PLL2_1, and PLL2 doesn't exist
on DRA72x SoCs.
There are quite many ways to configure the clocks, even using HDMI PLL
for LCD outputs, but enabling full configuration of the clocks is rather
tricky.
This patch improves the situation a bit by checking if the PLL about to
be used exists, and if not, tries another one.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
mode_config's min_width and min_height are both set to 32, which is
overly restrictive.
The real limits depend on whether we're configuring a crtc or a plane,
but a limit of 8x2 is safe for both cases.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The driver only uses even dividers for hsdiv when pclk >= 100MHz, as odd
dividers can create uneven duty cycle. However, while this holds true
for some dividers like DISPC's LCK and PCK dividers, it is not actually
true for hsdiv.
hsdiv always produces even duty cycle, so the constraint can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The current driver doesn't expose any of the CRTC HW properties like
background color or transparency key, and sets them at CRTC enable time.
Refactor this into a separate function and call that function from
omap_crtc_atomic_flush(). This is the behavior we want when the
properties can be configured, so this patch makes it easier to add
patches later which implement those properties.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DRA7 errata i886 (FPDLink PLL Unlocks With Certain SoC PLL M/N Values)
says that FPDLink is sensitive to jitter on the vout clock, and that low
PLL M and N values result in more jitter than high M and N values.
This patch implements a workaround for the problem by changing the PLL
setup to search for clocks starting from high M and N values, instead of
low values. This should not cause any functional change, and only
reduces the jitter.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
drm-misc for 4.12:
Core:
- Removed some fb subsampling dimension checks from core (Ville)
- Some MST slot cleanup (Dhinakaran)
- Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel)
- Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts
(Daniel)
- Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel)
- Cleanups around vblank as well as allowing lockless counter reads (Chris W.)
- VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas)
Drivers:
- Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.)
- Thunderbolt external GPU awareness added (Lukas)
* tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits)
apple-gmux: Don't switch external DP port on 2011+ MacBook Pros
drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo
drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo
drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo
PCI: Recognize Thunderbolt devices
MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo
drm: Fix locking gotcha in page_flip ioctl
drm: Clarify the role of plane_state argument to drm_simple update().
drm: Clear e after kfree in drm_mode_page_flip_ioctl
drm: Convert cmpxchg(bool) back to a two step operation
drm/bridge: ti-tfp410: support hpd via gpio
drm: use .hword to represent 16-bit numbers
Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl"
drm: Fixup failure paths in drm_atomic_helper_set_config
drm: Peek at the current counter/timestamp for vblank queries
drm: Refactor vblank sequence number comparison
drm: vblank cannot be enabled if dev->irq_enabled is false
drm: Mark up accesses of vblank->enabled outside of its spinlock
drm: Make the decision to keep vblank irq enabled earlier
drm/atomic-helper: Remove the backoff hack from set_config
...
Reordering of the device nodes based on unit address resulted in
ge_b850v3_lvds_attach() being called before
ge_b850v3_lvds_ptr->stdp4028_i2c was populated.
This patch moves the drm bridge initialization from
ge_b850v3_lvds_init() to stdp4028_ge_b850v3_fw_probe() ensuring that
ge_b850v3_lvds_ptr->stdp4028_i2c is properly populated.
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330081928.8537-1-peter.senna@collabora.com
Couple of minor fixes for 4.11
- array bound fix for __get_unmap_pool()
- cyclic period splitting for bcm2835
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bNTJ
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A couple of minor fixes for 4.11:
- array bound fix for __get_unmap_pool()
- cyclic period splitting for bcm2835"
* tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
dmaengine: bcm2835: Fix cyclic DMA period splitting
Pull x86 fixes from Thomas Gleixner:
"This update provides:
- prevent KASLR from randomizing EFI regions
- restrict the usage of -maccumulate-outgoing-args and document when
and why it is required.
- make the Global Physical Address calculation for UV4 systems work
correctly.
- address a copy->paste->forgot-edit problem in the MCE exception
table entries.
- assign a name to AMD MCA bank 3, so the sysfs file registration
works.
- add a missing include in the boot code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Include missing header file
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
x86/build: Mostly disable '-maccumulate-outgoing-args'
x86/mm/KASLR: Exclude EFI region from KASLR VA space randomization
x86/mce: Fix copy/paste error in exception table entries
x86/platform/uv: Fix calculation of Global Physical Address
Pull scheduler fixes from Thomas Gleixner:
"This update provides:
- make the scheduler clock switch to unstable mode smooth so the
timestamps stay at microseconds granularity instead of switching to
tick granularity.
- unbreak perf test tsc by taking the new offset into account which
was added in order to proveide better sched clock continuity
- switching sched clock to unstable mode runs all clock related
computations which affect the sched clock output itself from a work
queue. In case of preemption sched clock uses half updated data and
provides wrong timestamps. Keep the math in the protected context
and delegate only the static key switch to workqueue context.
- remove a duplicate header include"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/headers: Remove duplicate #include <linux/sched/debug.h> line
sched/clock: Fix broken stable to unstable transfer
sched/clock, x86/perf: Fix "perf test tsc"
sched/clock: Fix clear_sched_clock_stable() preempt wobbly
Pull EFI fix from Thomas Gleixner:
"Downgrade the missing ESRT header printk to warning level and remove a
useless error printk which just generates noise for no value"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/esrt: Cleanup bad memory map log messages
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the new CLKEVT_OF infrastructure"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vmlinux.lds: Add __clkevt_of_table to kernel
clockevents: Fix syntax error in clkevt-of macro
Pull irq fixes from Thomas Gleixner:
"Two small fixlets:
- select a required Kconfig to make the MVEBU driver compile
- add the missing MIPS local GIC interrupts which prevent drivers to
probe successfully"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix Local compare interrupt
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
Pull core fix from Thomas Gleixner:
"Prevent leaking kernel memory via /proc/$pid/syscall when the queried
task is not in a syscall"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/syscall: Clear return values when no stack
This series enables atomic mode set for vmwgfx. A number of features and
larger fixes are also included.
* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: (22 commits)
drm/vmwgfx: Properly check display/scanout surface size
drm/vmwgfx: Support topology greater than texture size
drm/vmwgfx: Define an overlaid handle_close ioctl.
drm/vmwgfx: Re-implement the stream resource as a simple resource.
drm/vmwgfx: Introduce a simple resource type
drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro"
drm/vmwgfx: Fix LDU X blank screen until mode change issue
drm/vmwgfx: Skipping fbdev fb pinning for ldu
drm/vmwgfx: Explicityly track screen target width and height
drm/vmwgfx: Turn on DRIVER_ATOMIC flag
drm/vmwgfx: Switch over to internal atomic API for SOU and LDU
drm/vmwgfx: Switch over to internal atomic API for STDU
drm/vmwgfx: Fixes to vmwgfx_fb
drm/vmwgfx: Add and connect atomic state object check/commit
drm/vmwgfx: Add and connect connector helper function
drm/vmwgfx: Add and connect plane helper functions
drm/vmwgfx: Add and connect CRTC helper functions
drm/vmwgfx: Connector atomic state
drm/vmwgfx: Plane atomic state
drm/vmwgfx: CRTC atomic state
...
Pull parisc fixes from Helge Deller:
"Al Viro reported that - in case of read faults - our copy_from_user()
implementation may claim to have copied more bytes than it actually
did. In order to fix this bug and because of the way how gcc optimizes
register usage for inline assembly in C code, we had to replace our
pa_memcpy() function with a pure assembler implementation.
While fixing the memcpy bug we noticed some other issues with our
get_user() and put_user() functions, e.g. nested faults may return
wrong data. This is now fixed by a common fixup handler for
get_user/put_user in the exception handler which additionally makes
generated code smaller and faster.
The third patch is a trivial one-line fix for a patch which went in
during 4.11-rc and which avoids stalled CPU warnings after power
shutdown (for parisc machines which can't plug power off themselves).
Due to the rewrite of pa_memcpy() into assembly this patch got bigger
than what I wanted to have sent at this stage.
Those patches have been running in production during the last few days
on our debian build servers without any further issues"
* 'parisc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid stalled CPU warnings after system shutdown
parisc: Clean up fixup routines for get_user()/put_user()
parisc: Fix access fault handling in pa_memcpy()
Thirteen small fixes: The hopefully final effort to get the lpfc nvme
kconfig problems sorted, there's one important sg fix (user can induce
read after end of buffer) and one minor enhancement (adding an extra
PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
as user visible in error legs or on specific devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=umUo
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirteen small fixes: The hopefully final effort to get the lpfc nvme
kconfig problems sorted, there's one important sg fix (user can induce
read after end of buffer) and one minor enhancement (adding an extra
PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
as user visible in error legs or on specific devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: remove the duplicated checking for supporting clkscaling
scsi: lpfc: fix building without debugfs support
scsi: lpfc: Fix PT2PT PRLI reject
scsi: hpsa: fix volume offline state
scsi: libsas: fix ata xfer length
scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULL
scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function
scsi: scsi_dh_alua: Check scsi_device_get() return value
scsi: sg: check length passed to SG_NEXT_CMD_LEN
scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERR
scsi: qedi: Add PCI device-ID for QL41xxx adapters.
scsi: aacraid: Fix potential null access
scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: do not sanitize kexec purgatory
drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
mm/hugetlb.c: don't call region_abort if region_chg fails
kasan: report only the first error by default
hugetlbfs: initialize shared policy as part of inode allocation
mm: fix section name for .data..ro_after_init
mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
mm: workingset: fix premature shadow node shrinking with cgroups
mm: rmap: fix huge file mmap accounting in the memcg stats
mm: move mm_percpu_wq initialization earlier
mm: migrate: fix remove_migration_pte() for ksm pages
Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for
yet-another-bug-found-by-KASAN, those developers are doing great stuff
here. And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWN/NGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymNQQCeNiONvY70Y99hWFDX+PL896fV1rYAoNchYIZY
V4NYSVr43W4uk7jrUQD5
=NUT1
-----END PGP SIGNATURE-----
Merge tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for yet-another-bug-
found-by-KASAN, those developers are doing great stuff here.
And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
xhci: Manually give back cancelled URB if we can't queue it for cancel
xhci: Set URB actual length for stopped control transfers
xhci: plat: Register shutdown for xhci_plat
USB: fix linked-list corruption in rh_call_control()
Here are some small fixes for some serial drivers and Kconfig help text
for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWN/ODw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl5cwCfaBlkq7fOavwOENjXEGCsilXUNP0Anic5NQ5D
F26b+NwYZUO2MAQjZ2MP
=pS56
-----END PGP SIGNATURE-----
Merge tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small fixes for some serial drivers and Kconfig help
text for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)"
* tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: pl011: fix earlycon work-around for QDF2400 erratum 44
serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
tty/serial: atmel: fix TX path in atmel_console_write()
tty/serial: atmel: fix race condition (TX+DMA)
serial: mxs-auart: Fix baudrate calculation
- Drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- Add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- Fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform
device objects for IO(x)APICs which are (a) unused and (b) leaked
on hot-removal (Joerg Roedel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dCcJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues related to IOAPIC hotplug, an overzealous build
optimization that prevents the function graph tracer from working with
the ACPI subsystem correctly and an RCU synchronization issue in the
ACPI APEI code.
Specifics:
- drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform device
objects for IO(x)APICs which are (a) unused and (b) leaked on
hot-removal (Joerg Roedel)"
* tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
ACPI: ioapic: Clear on-stack resource before using it
- Symbolic links from CPU directories to the corresponding cpufreq
policy directories in sysfs are not created during initialization
in some cases which confuses user space, so prevent that from
happening (Rafael Wysocki).
- The powernv cpuidle driver fails to pass a correct cpumaks to
the cpuidle core in some cases which causes subsequent failures
to occur, so fix it (Vaidyanathan Srinivasan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MRmB
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq core issue with the initialization of the cpufreq
sysfs interface and a cpuidle powernv driver initialization issue.
Specifics:
- symbolic links from CPU directories to the corresponding cpufreq
policy directories in sysfs are not created during initialization
in some cases which confuses user space, so prevent that from
happening (Rafael Wysocki).
- the powernv cpuidle driver fails to pass a correct cpumaks to the
cpuidle core in some cases which causes subsequent failures to
occur, so fix it (Vaidyanathan Srinivasan)"
* tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: powernv: Pass correct drv->cpumask for registration
cpufreq: Fix creation of symbolic links to policy directories
Pull i2c fixes from Wolfram Sang:
"Two bugfixes from I2C, specifically the I2C mux section. Thanks to
peda for collecting them"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
Revert "i2c: mux: pca954x: Add ACPI support for pca954x"
- reading clk from driver vs. device tree [Vlad]
- Fix support for UIO in VDK platform [Alexey]
- SLC busy bit reading workaround
- build warning with kprobes header reorg
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MIWw
-----END PGP SIGNATURE-----
Merge tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Accumulated fixes for ARC which I've been been sitting on for a while:
- reading clk from driver vs device tree [Vlad]
- fix support for UIO in VDK platform [Alexey]
- SLC busy bit reading workaround
- build warning with kprobes header reorg"
* tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix build warnings with !CONFIG_KPROBES
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
ARC: vdk: Fix support of UIO
ARCv2: make unimplemented vectors as no-ops rather than halt core
ARC: get rate from clk driver instead of reading device tree
ARC: [dts] add cpu nodes to ARCHS SMP device tree
ARC: [dts] add input clocks for cpu nodes
backchannel; fix. Also some minor refinements to the nfsd
version-setting interface that we'd like to get fixed before release.
-----BEGIN PGP SIGNATURE-----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=oi0+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"The restriction of NFSv4 to TCP went overboard and also broke the
backchannel; fix.
Also some minor refinements to the nfsd version-setting interface that
we'd like to get fixed before release"
* tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux:
svcrdma: set XPT_CONG_CTRL flag for bc xprt
NFSD: fix nfsd_reset_versions for NFSv4.
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: further refinement of content of /proc/fs/nfsd/versions
nfsd: map the ENOKEY to nfserr_perm for avoiding warning
SUNRPC/backchanel: set XPT_CONG_CTRL flag for bc xprt
The work-around for the Qualcomm Datacenter Technologies QDF2400
erratum 44 sets the "qdf2400_e44_present" global variable if the
work-around is needed. However, this check does not happen until after
earlycon is initialized, which means the work-around is not
used, and the console hangs as soon as it displays one character.
Fixes: d8a4995bce ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull btrfs fixes from Chris Mason:
"We have three small fixes queued up in my for-linus-4.11 branch"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix an integer overflow check
btrfs: Change qgroup_meta_rsv to 64bit
Btrfs: bring back repair during read
kbuild test robot reported a non-static variable name collision between
a staging driver and a RapidIO driver, with a generic variable name of
'dbg_level'.
Both drivers should be changed so that they don't use this generic
public variable name. This patch fixes the RapidIO driver but does not
change the user interface (name) for the module parameter.
drivers/staging/built-in.o:(.bss+0x109d0): multiple definition of `dbg_level'
drivers/rapidio/built-in.o:(.bss+0x16c): first defined here
Link: http://lkml.kernel.org/r/ab527fc5-aa3c-4b07-5d48-eef5de703192@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changes to hugetlbfs reservation maps is a two step process. The first
step is a call to region_chg to determine what needs to be changed, and
prepare that change. This should be followed by a call to call to
region_add to commit the change, or region_abort to abort the change.
The error path in hugetlb_reserve_pages called region_abort after a
failed call to region_chg. As a result, the adds_in_progress counter in
the reservation map is off by 1. This is caught by a VM_BUG_ON in
resv_map_release when the reservation map is freed.
syzkaller fuzzer (when using an injected kmalloc failure) found this
bug, that resulted in the following:
kernel BUG at mm/hugetlb.c:742!
Call Trace:
hugetlbfs_evict_inode+0x7b/0xa0 fs/hugetlbfs/inode.c:493
evict+0x481/0x920 fs/inode.c:553
iput_final fs/inode.c:1515 [inline]
iput+0x62b/0xa20 fs/inode.c:1542
hugetlb_file_setup+0x593/0x9f0 fs/hugetlbfs/inode.c:1306
newseg+0x422/0xd30 ipc/shm.c:575
ipcget_new ipc/util.c:285 [inline]
ipcget+0x21e/0x580 ipc/util.c:639
SYSC_shmget ipc/shm.c:673 [inline]
SyS_shmget+0x158/0x230 ipc/shm.c:657
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: resv_map_release+0x265/0x330 mm/hugetlb.c:742
Link: http://lkml.kernel.org/r/1490821682-23228-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disable kasan after the first report. There are several reasons for
this:
- Single bug quite often has multiple invalid memory accesses causing
storm in the dmesg.
- Write OOB access might corrupt metadata so the next report will print
bogus alloc/free stacktraces.
- Reports after the first easily could be not bugs by itself but just
side effects of the first one.
Given that multiple reports usually only do harm, it makes sense to
disable kasan after the first one. If user wants to see all the
reports, the boot-time parameter kasan_multi_shot must be used.
[aryabinin@virtuozzo.com: wrote changelog and doc, added missing include]
Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Any time after inode allocation, destroy_inode can be called. The
hugetlbfs inode contains a shared_policy structure, and
mpol_free_shared_policy is unconditionally called as part of
hugetlbfs_destroy_inode. Initialize the policy as part of inode
allocation so that any quick (error path) calls to destroy_inode will be
handed an initialized policy.
syzkaller fuzzer found this bug, that resulted in the following:
BUG: KASAN: user-memory-access in atomic_inc
include/asm-generic/atomic-instrumented.h:87 [inline] at addr
000000131730bd7a
BUG: KASAN: user-memory-access in __lock_acquire+0x21a/0x3a80
kernel/locking/lockdep.c:3239 at addr 000000131730bd7a
Write of size 4 by task syz-executor6/14086
CPU: 3 PID: 14086 Comm: syz-executor6 Not tainted 4.11.0-rc3+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
atomic_inc include/asm-generic/atomic-instrumented.h:87 [inline]
__lock_acquire+0x21a/0x3a80 kernel/locking/lockdep.c:3239
lock_acquire+0x1ee/0x590 kernel/locking/lockdep.c:3762
__raw_write_lock include/linux/rwlock_api_smp.h:210 [inline]
_raw_write_lock+0x33/0x50 kernel/locking/spinlock.c:295
mpol_free_shared_policy+0x43/0xb0 mm/mempolicy.c:2536
hugetlbfs_destroy_inode+0xca/0x120 fs/hugetlbfs/inode.c:952
alloc_inode+0x10d/0x180 fs/inode.c:216
new_inode_pseudo+0x69/0x190 fs/inode.c:889
new_inode+0x1c/0x40 fs/inode.c:918
hugetlbfs_get_inode+0x40/0x420 fs/hugetlbfs/inode.c:734
hugetlb_file_setup+0x329/0x9f0 fs/hugetlbfs/inode.c:1282
newseg+0x422/0xd30 ipc/shm.c:575
ipcget_new ipc/util.c:285 [inline]
ipcget+0x21e/0x580 ipc/util.c:639
SYSC_shmget ipc/shm.c:673 [inline]
SyS_shmget+0x158/0x230 ipc/shm.c:657
entry_SYSCALL_64_fastpath+0x1f/0xc2
Analysis provided by Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: http://lkml.kernel.org/r/1490477850-7944-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A section name for .data..ro_after_init was added by both:
commit d07a980c1b ("s390: add proper __ro_after_init support")
and
commit d7c19b066d ("mm: kmemleak: scan .data.ro_after_init")
The latter adds incorrect wrapping around the existing s390 section, and
came later. I'd prefer the s390 naming, so this moves the s390-specific
name up to the asm-generic/sections.h and renames the section as used by
kmemleak (and in the future, kernel/extable.c).
Link: http://lkml.kernel.org/r/20170327192213.GA129375@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390 parts]
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0a6b76dd23 ("mm: workingset: make shadow node shrinker memcg
aware") enabled cgroup-awareness in the shadow node shrinker, but forgot
to also enable cgroup-awareness in the list_lru the shadow nodes sit on.
Consequently, all shadow nodes are sitting on a global (per-NUMA node)
list, while the shrinker applies the limits according to the amount of
cache in the cgroup its shrinking. The result is excessive pressure on
the shadow nodes from cgroups that have very little cache.
Enable memcg-mode on the shadow node LRUs, such that per-cgroup limits
are applied to per-cgroup lists.
Fixes: 0a6b76dd23 ("mm: workingset: make shadow node shrinker memcg aware")
Link: http://lkml.kernel.org/r/20170322005320.8165-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov@tarantool.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huge pages are accounted as single units in the memcg's "file_mapped"
counter. Account the correct number of base pages, like we do in the
corresponding node counter.
Link: http://lkml.kernel.org/r/20170322005111.3156-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Li has reported that drain_all_pages triggers a WARN_ON which means
that this function is called earlier than the mm_percpu_wq is
initialized on arm64 with CMA configured:
WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:2423 drain_all_pages+0x244/0x25c
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-next-20170310-00027-g64dfbc5 #127
Hardware name: Freescale Layerscape 2088A RDB Board (DT)
task: ffffffc07c4a6d00 task.stack: ffffffc07c4a8000
PC is at drain_all_pages+0x244/0x25c
LR is at start_isolate_page_range+0x14c/0x1f0
[...]
drain_all_pages+0x244/0x25c
start_isolate_page_range+0x14c/0x1f0
alloc_contig_range+0xec/0x354
cma_alloc+0x100/0x1fc
dma_alloc_from_contiguous+0x3c/0x44
atomic_pool_init+0x7c/0x208
arm64_dma_init+0x44/0x4c
do_one_initcall+0x38/0x128
kernel_init_freeable+0x1a0/0x240
kernel_init+0x10/0xfc
ret_from_fork+0x10/0x20
Fix this by moving the whole setup_vmstat which is an initcall right now
to init_mm_internals which will be called right after the WQ subsystem
is initialized.
Link: http://lkml.kernel.org/r/20170315164021.28532-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Yang Li <pku.leo@gmail.com>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The scanout surface size is the smaller of max texture size and
max STDU size.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Most of the display servers today use a single surface to represent the
entire desktop even if it's stretched across multiple screens.
For vmwgfx with STDU, the maximum surface size is limited to the
maximum texture size on the host. On a 2D VM, this limits our
ability to support configurations with more than one 4K monitor.
To get past this limitation, we will now allow using a large DMA buf
as the framebuffer, and take care of blitting contents from this DMA buf
to the display buffer.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Instead of providing an ioctl for each handle type, provide a single
handle_close ioctl, and reuse the UNREF_DMABUF ioctl.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The callbacks we need to provide to many resources are very similar, so
provide a simple resource type with a number of helpers for these
callbacks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This reverts commit 2d8e60e8b0 ("drm/vmwgfx: Replace numeric
parameter like 0444 with macro")
The commit belongs to the series of 1285 patches sent to LKML on
2016-08-02, it changes the representation of file permissions from the
octal value "0600" to "S_IRUSR | S_IWUSR".
The general consensus was that the changes does not increase
readability, quite the opposite; 0600 is easier to parse mentally than
S_IRUSR | S_IWUSR.
It also causes argument inconsistency, due to commit 04319d89fb
("drm/vmwgfx: Add an option to change assumed FB bpp") that added
another call to module_param_named() where the permissions are written
as 0600.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
vmw_ldu_crtc_helper_commit() is not called if
drm_atomic_crtc_needs_modeset() decides nothing related to CRTC timing has
changed.
So a better place for this code is in vmw_ldu_primary_plane_atomic_update()
since we will need to update ld->fb every time the FB is updated.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
