In order to ensure no missed interrupts we must first re-direct
the interrupts to GuC, and only then re-submit the requests to
be replayed after a GPU reset. Otherwise context switch can fire
before GuC has been set up to receive it triggering more hangs.
v2: Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309132005.1317-1-tvrtko.ursulin@linux.intel.com
There is no easily digestible single self-refresh status bit, so don't
report one for debugfs/i915_sr_status on gen9+. For the moment this
avoids a read of the non-existent WM1_LP_ILK register.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309142049.16033-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Driver needs to ensure that it doesn't mask the PM interrupts, which are
unmasked/needed by GuC firmware. For that, Driver maintains a bitmask of
interrupts to be kept unmasked, pm_intr_keep.
pm_intr_keep was determined across GuC load. GuC gets loaded in different
scenarios and it is not going to change the pm_intr_keep so this patch
moves its setup to intel_irq_init.
This patch fixes incorrect RPS masking leading to UP interrupts triggered
even when at cur_freq=max and inversly for Down interrupts.
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488862355-9768-1-git-send-email-sagar.a.kamble@intel.com
printks are slow so we should not be doing them from the vblank evade
critical section. These could explain why we sometimes seem to
blow past our 100 usec deadline.
The problem has been there ever since commit c331879ce8 ("drm/i915:
skylake sprite plane scaling using shared scalers.") but it may not have
been readily visible until commit e1edbd44e2 ("drm/i915: Complain
if we take too long under vblank evasion.") increased our chances
of noticing it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488974407-25175-1-git-send-email-maarten.lankhorst@linux.intel.com
Fixes: c331879ce8 ("drm/i915: skylake sprite plane scaling using shared scalers")
Cc: <stable@vger.kernel.org> # v4.2+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Add missing tags, point to the correct offending commit]
Add a selftest to exercise evicting neighbouring nodes that conflict due
to page colouring in the GTT.
v2: add a peppering of comments
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306235414.23407-4-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
It looks like we were incorrectly comparing vma->node against itself
instead of the target node, when evicting for a node on systems where we
need guard pages between regions with different cache domains. As a
consequence we can end up trying to needlessly evict neighbouring nodes,
even if they have the same cache domain, and if they were pinned we
would fail the eviction.
Fixes: 625d988acc ("drm/i915: Extract reserving space in the GTT to a helper")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306235414.23407-3-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If we allow the user to convert a GTT mmap address into a userptr, we
may end up in recursion hell, where currently we hit a mutex deadlock
but other possibilities include use-after-free during the
unbind/cancel_userptr.
[ 143.203989] gem_userptr_bli D 0 902 898 0x00000000
[ 143.204054] Call Trace:
[ 143.204137] __schedule+0x511/0x1180
[ 143.204195] ? pci_mmcfg_check_reserved+0xc0/0xc0
[ 143.204274] schedule+0x57/0xe0
[ 143.204327] schedule_timeout+0x383/0x670
[ 143.204374] ? trace_hardirqs_on_caller+0x187/0x280
[ 143.204457] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 143.204507] ? usleep_range+0x110/0x110
[ 143.204657] ? irq_exit+0x89/0x100
[ 143.204710] ? retint_kernel+0x2d/0x2d
[ 143.204794] ? trace_hardirqs_on_caller+0x187/0x280
[ 143.204857] ? _raw_spin_unlock_irq+0x33/0x60
[ 143.204944] wait_for_common+0x1f0/0x2f0
[ 143.205006] ? out_of_line_wait_on_atomic_t+0x170/0x170
[ 143.205103] ? wake_up_q+0xa0/0xa0
[ 143.205159] ? flush_workqueue_prep_pwqs+0x15a/0x2c0
[ 143.205237] wait_for_completion+0x1d/0x20
[ 143.205292] flush_workqueue+0x2e9/0xbb0
[ 143.205339] ? flush_workqueue+0x163/0xbb0
[ 143.205418] ? __schedule+0x533/0x1180
[ 143.205498] ? check_flush_dependency+0x1a0/0x1a0
[ 143.205681] i915_gem_userptr_mn_invalidate_range_start+0x1c7/0x270 [i915]
[ 143.205865] ? i915_gem_userptr_dmabuf_export+0x40/0x40 [i915]
[ 143.205955] __mmu_notifier_invalidate_range_start+0xc6/0x120
[ 143.206044] ? __mmu_notifier_invalidate_range_start+0x51/0x120
[ 143.206123] zap_page_range_single+0x1c7/0x1f0
[ 143.206171] ? unmap_single_vma+0x160/0x160
[ 143.206260] ? unmap_mapping_range+0xa9/0x1b0
[ 143.206308] ? vma_interval_tree_subtree_search+0x75/0xd0
[ 143.206397] unmap_mapping_range+0x18f/0x1b0
[ 143.206444] ? zap_vma_ptes+0x70/0x70
[ 143.206524] ? __pm_runtime_resume+0x67/0xa0
[ 143.206723] i915_gem_release_mmap+0x1ba/0x1c0 [i915]
[ 143.206846] i915_vma_unbind+0x5c2/0x690 [i915]
[ 143.206925] ? __lock_is_held+0x52/0x100
[ 143.207076] i915_gem_object_set_tiling+0x1db/0x650 [i915]
[ 143.207236] i915_gem_set_tiling_ioctl+0x1d3/0x3b0 [i915]
[ 143.207377] ? i915_gem_set_tiling_ioctl+0x5/0x3b0 [i915]
[ 143.207457] drm_ioctl+0x36c/0x670
[ 143.207535] ? debug_lockdep_rcu_enabled.part.0+0x1a/0x30
[ 143.207730] ? i915_gem_object_set_tiling+0x650/0x650 [i915]
[ 143.207793] ? drm_getunique+0x120/0x120
[ 143.207875] ? __handle_mm_fault+0x996/0x14a0
[ 143.207939] ? vm_insert_page+0x340/0x340
[ 143.208028] ? up_write+0x28/0x50
[ 143.208086] ? vm_mmap_pgoff+0x160/0x190
[ 143.208163] do_vfs_ioctl+0x12c/0xa60
[ 143.208218] ? debug_lockdep_rcu_enabled+0x35/0x40
[ 143.208267] ? ioctl_preallocate+0x150/0x150
[ 143.208353] ? __do_page_fault+0x36a/0x6e0
[ 143.208400] ? mark_held_locks+0x23/0xc0
[ 143.208479] ? up_read+0x1f/0x40
[ 143.208526] ? entry_SYSCALL_64_fastpath+0x5/0xc6
[ 143.208669] ? __fget_light+0xa7/0xc0
[ 143.208747] SyS_ioctl+0x41/0x70
To prevent the possibility of a deadlock, we defer scheduling the worker
until after we have proven that given the current mm, the userptr range
does not overlap a GGTT mmaping. If another thread tries to remap the
GGTT over the userptr before the worker is scheduled, it will be stopped
by its invalidate-range flushing the current work, before the deadlock
can occur.
v2: Improve discussion of how we end up in the deadlock.
v3: Don't forget to mark the userptr as active after a successful
gup_fast. Rename overlaps_ggtt to noncontiguous_or_overlaps_ggtt.
v4: Fix test ordering between invalid GTT mmaping and range completion
(Tvrtko)
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Testcase: igt/gem_userptr_blits/map-fixed-invalidate-gup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308215903.24171-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
To avoid waiting for work from other invalidate-range threads where
not required, only wait on the userptr cancel workqueue if we have added
some work to it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205851.32578-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If the worker fails, it no longer has pages to release and can be
immediately removed from the invalidate-tree.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205851.32578-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The trouble here is that looking at all connector->state in the
verifier isn't good, because that's run from the commit work, which
doesn't hold the connection_mutex. Which means we're only allowed to
look at states in our atomic update.
The simple fix for future proofing would be to switch over to
drm_for_each_connector_in_state, but that has the problem that the
verification then fails if not all connectors are in the state. And we
also need to be careful to check both old and new encoders, and not
screw things up when an encoder gets reassigned.
Note that this isn't the full fix, since we still look at
connector->state. To fix that, we need Maarten's patch series to
switch over to state pointers within drm_atomic_state, but that's a
different series.
v2: Use oldnew iterator (Maarten).
v3: Rebase onto the iter_get/put->iter_begin/end rename.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-6-daniel.vetter@ffwll.ch
This gets rid of the last users of for_each_intel_connector(), remove
that too.
At first I wasn't sure whether the 2 loops in the modeset state
checker should instead only loop over the connectors in the atomic
commit. But we never add connectors to an atomic update if they don't
(or won't have) a CRTC assigned, which means there'd be a gap in check
coverage. Hence loop over everything on those too.
v2: Rebase onto the iter_get/put->iter_begin/end rename.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-5-daniel.vetter@ffwll.ch
Drive-by fixup while looking at all the connector_list walkers -
holding connection_mutex does actually _not_ give you locking to look
at the legacy drm_connector->encoder->crtc pointer chain. That one is
solely owned by the atomic commit workers. Instead we must inspect the
atomic state.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-4-daniel.vetter@ffwll.ch
One case where I nuked a now unecessary locking, otherwise all just
boring stuff.
v2: Rebase onto the iter_get/put->iter_begin/end rename.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-3-daniel.vetter@ffwll.ch
While at it also try to reduce the locking a bit to what's really just
needed instead of everything that we could possibly lock.
Added a new for_each_intel_connector_iter which includes the cast to
intel_connector.
Otherwise just plain transformation with nothing special going on.
v2: Review from Maarten:
- Stick with modeset_lock_all in sink_crc, it looks at crtc->state.
- Fix up early loop exit in i915_displayport_test_active_write.
v3: Rebase onto the iter_get/put->iter_begin/end rename.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301095226.30584-1-daniel.vetter@ffwll.ch
__i915_gem_request_started() asserts that the seqno is valid, but
i915_spin_request() was not checking before querying whether the request
had started.
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Fixes: 754c9fd576 ("drm/i915: Protect the request->global_seqno with the engine->timeline lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308142238.22994-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
i915_gem_object_is_dead() was a temporary lockdep aide whilst
transitioning to a new locking structure for obj->mm. Since commit
1233e2db19 ("drm/i915: Move object backing storage manipulation to its
own locking") it is now unused and should be removed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308132629.7987-2-chris@chris-wilson.co.uk
DRM_UT_CORE generates way too much noise usually, so having the
framebuffer init failures use DRM_UT_CORE is a pain when trying to
find out the reason why you failed in creating a framebuffer.
Let's use DRM_UT_KMS for these debug messages instead.
v2: s/at less than/at most/ in the debug message (Imre)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-6-ville.syrjala@linux.intel.com
Let's try to keep the alignment requirements in one place, and so
towards that end let's move the AUX_DIST alignment handling into
intel_surf_alignment() alongside the main surface alignment stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-3-ville.syrjala@linux.intel.com
under virtualization enviroment, it is possible guest update pipe
registers across vblank intervals due to overhead of mmio traps or vm
schedule out. However, it is safe since those pipe update happen in
virual registers and will not be committed to hardware. suppress that
atomic commit error message under virtualization case to avoid
confusing user.
v2: per ville's comment: return early and against Maarten's patch
v3: coding style clean
Signed-off-by: Bing Niu <bing.niu@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489004043-15449-1-git-send-email-bing.niu@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
printks are slow so we should not be doing them from the vblank evade
critical section. These could explain why we sometimes seem to
blow past our 100 usec deadline.
The problem has been there ever since commit bfd16b2a23 ("drm/i915:
Make updating pipe without modeset atomic.") but it may not have
been readily visible until commit e1edbd44e2 ("drm/i915: Complain
if we take too long under vblank evasion.") increased our chances
of noticing it.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: bfd16b2a23 ("drm/i915: Make updating pipe without modeset atomic.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205419.19447-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Backmerge drm-next to get at all the good stuff in drm-misc. We need
that because:
- drm_connector_list_iter conversion for i915 needs the core patches.
- Maarten's patches to use the new atomic state iterators also need
the core patches.
- We need the new link status property to complete the DP retraining
work, merging through 2 branches wasn't a good idea and we had to
partially backtrack.
- Chris needs reservation_object_trylock and we want to roll out
kref_read everywhere.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
- Re-architecture of the code to handle proprietary fw, more abstracted
to support the multitude of differences that NVIDIA introduce
- Support in the said code for GP10x ACR and GR fw, giving acceleration
support \o/
- Fix for GTX 970 GPUs that are in an odd MMU configuration
* 'linux-4.12' of git://github.com/skeggsb/linux: (60 commits)
drm/nouveau/fb/gf100-: rework ram detection
drm/nouveau/fb/gm200: split ram implementation from gm107
drm/nouveau/fb/gf108: split implementation from gf100
drm/nouveau/fb/gf100-: modify constructors to allow more customisation
drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
drm/nouveau/i2c/g94-: return REPLY_M value on reads
drm/nouveau/i2c: modify aux interface to return length actually transferred
drm/nouveau/gp10x: enable secboot and GR
drm/nouveau/gr/gp102: initial support
drm/nouveau/falcon: support for gp10x msgqueue
drm/nouveau/secboot: add gp102/gp104/gp106/gp107 support
drm/nouveau/secboot: put HS code loading code into own file
drm/nouveau/secboot: support for r375 ACR
drm/nouveau/secboot: support for r367 ACR
drm/nouveau/secboot: support for r364 ACR
drm/nouveau/secboot: workaround bug when starting SEC2 firmware
drm/nouveau/secboot: support standard NVIDIA HS binaries
drm/nouveau/secboot: support for unload blob bootloader
drm/nouveau/secboot: let callers interpret return value of blobs
drm/nouveau/secboot: support for different load and unload falcons
...
4 weeks worth of stuff since I was traveling&lazy:
- lspcon improvements (Imre)
- proper atomic state for cdclk handling (Ville)
- gpu reset improvements (Chris)
- lots and lots of polish around fences, requests, waiting and
everything related all over (both gem and modeset code), from Chris
- atomic by default on gen5+ minus byt/bsw (Maarten did the patch to
flip the default, really this is a massive joint team effort)
- moar power domains, now 64bit (Ander)
- big pile of in-kernel unit tests for various gem subsystems (Chris),
including simple mock objects for i915 device and and the ggtt
manager.
- i915_gpu_info in debugfs, for taking a snapshot of the current gpu
state. Same thing as i915_error_state, but useful if the kernel didn't
notice something is stick. From Chris.
- bxt dsi fixes (Umar Shankar)
- bxt w/a updates (Jani)
- no more struct_mutex for gem object unreference (Chris)
- some execlist refactoring (Tvrtko)
- color manager support for glk (Ander)
- improve the power-well sync code to better take over from the
firmware (Imre)
- gem tracepoint polish (Tvrtko)
- lots of glk fixes all around (Ander)
- ctx switch improvements (Chris)
- glk dsi support&fixes (Deepak M)
- dsi fixes for vlv and clanups, lots of them (Hans de Goede)
- switch to i915.ko types in lots of our internal modeset code (Ander)
- byt/bsw atomic wm update code, yay (Ville)
* tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel: (432 commits)
drm/i915: Update DRIVER_DATE to 20170306
drm/i915: Don't use enums for hardware engine id
drm/i915: Split breadcrumbs spinlock into two
drm/i915: Refactor wakeup of the next breadcrumb waiter
drm/i915: Take reference for signaling the request from hardirq
drm/i915: Add FIFO underrun tracepoints
drm/i915: Add cxsr toggle tracepoint
drm/i915: Add VLV/CHV watermark/FIFO programming tracepoints
drm/i915: Add plane update/disable tracepoints
drm/i915: Kill level 0 wm hack for VLV/CHV
drm/i915: Workaround VLV/CHV sprite1->sprite0 enable underrun
drm/i915: Sanitize VLV/CHV watermarks properly
drm/i915: Only use update_wm_{pre,post} for pre-ilk platforms
drm/i915: Nuke crtc->wm.cxsr_allowed
drm/i915: Compute proper intermediate wms for vlv/cvh
drm/i915: Skip useless watermark/FIFO related work on VLV/CHV when not needed
drm/i915: Compute vlv/chv wms the atomic way
drm/i915: Compute VLV/CHV FIFO sizes based on the PM2 watermarks
drm/i915: Plop vlv/chv fifo sizes into crtc state
drm/i915: Plop vlv wm state into crtc_state
...
Before we instantiate/pin the backing store for our use, we
can prepopulate the shmemfs filp efficiently using a write into the
pagecache. We avoid the penalty of instantiating all the pages, important
if the user is just writing to a few and never uses the object on the GPU,
and using a direct write into shmemfs allows it to avoid the cost of
retrieving a page (mostly the clear-before-use, but in theory we could
curtail swapin) before it is overwritten.
This can be extended later to provide additional specialisation for
other backends (other than shmemfs). For now it provides a defense
against very large write-only allocations from exhausting all of system
memory.
v2: Smelling fixes.
Fixes: fe115628d5 ("drm/i915: Implement pwrite without struct-mutex")
References: https://bugs.freedesktop.org/show_bug.cgi?id=99107
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307120338.7277-2-chris@chris-wilson.co.uk
Once the object has been truncated, it is unrecoverable. To facilitate
detection of this state store the error in obj->mm.pages.
This is required for the next patch which should be applied to v4.10
(via stable), so we also need to mark this patch for backporting. In
that regard, let's consider this to be a fix/improvement too.
v2: Avoid dereferencing the ERR_PTR when freeing the object.
Fixes: 1233e2db19 ("drm/i915: Move object backing storage manipulation to its own locking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170307132031.32461-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The IS_G4X macro is defined as IS_G45 || IS_GM45. We have two points
in our code where we have an if statement checking for GM45 followed
by an else if statement checking for IS_G4X. This can be confusing
since the IS_G4X check won't be catching the previously-checked GM45.
Someone quickly trying to check which functions run on each platform
may end up getting confused while reading the code.
Fix the potential confusion by limiting the else if statements to only
check for the platform that was not already checked earlier in the if
ladder.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487620842-22893-3-git-send-email-paulo.r.zanoni@intel.com
In order for the missed-irq update to take effect, the device must be
idle. So when the user updates the fault injection via debugfs, idle the
device.
v2: Idle is explicitly required for setting test_irq, and good behaviour
for clearing the missed_irq.
v3: Use matching types; expanding to more than ulong rings is left as an
exercise to the reader.
Testcase: igt/drv_missed_irq
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307155908.14576-1-chris@chris-wilson.co.uk
Emphasize that the VBT file is nowadays more about initializing and
running stuff based on the VBT contents, not so much about being a
"panel driver". No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/b13cb012a555ff5eb56b5e4bb2b0205c3e025a99.1488810382.git.jani.nikula@intel.com
The hook names reflect more the phase in the mode set sequence the hooks
are called in than what they actually do in terms of the specific
encoder. Stick to that scheme, and rename intel_dsi_pre_disable to
intel_dsi_disable. Unify the comments around this while at it. No
functional changes.
v2: Add more sense in the enable/disable hook comments (Ville)
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488878659-10386-1-git-send-email-jani.nikula@intel.com
Use the prefix intel_dsi_vbt for all the DSI VBT functions. No
functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/0a05abca364f3bc7f9caf90c9bd3a68eef5f222f.1488810382.git.jani.nikula@intel.com
Now that we've stopped using the drm_panel hooks, there aren't any
benefits left with using the drm_panel framework. Remove the rest of the
drm_panel use. No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/6602e36641451952065092401bd6e6cfbe93e208.1488810382.git.jani.nikula@intel.com
Commit 18a00095a5 ("drm/i915/dsi: Make intel_dsi_enable/disable
directly exec VBT sequences") started calling the VBT sequence functions
directly instead of using the drm_panel hooks. Remove the last drm_panel
hook by calling vbt_panel_get_modes() directly. No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/63d0d41f29583507f5968b42b5f52e6574a1f245.1488810382.git.jani.nikula@intel.com
Fact is, there are no other panel drivers except the VBT based
one. Simplify the code and maintenance. No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7dfd041dd25e8e930150ede09589bb232f6248d5.1488810382.git.jani.nikula@intel.com
To prevent having to preserve the drm_crtc_state as we clear the
intel_crtc_state, only memset our extended state.
Fixes:
drivers/gpu/drm/i915/intel_display.c: In function ‘clear_intel_crtc_state’:
drivers/gpu/drm/i915/intel_display.c:11301:1: error: the frame size of 1056 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
v2: Add a comment and BUILD_BUG_ON to explain the memset()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303154644.6709-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a nre version of DMC available for GLK.
The release notes mentions:
This FW has the fix to remove the hang conditions due to
some debug related issues.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487793336-31857-1-git-send-email-anusha.srivatsa@intel.com
Timer callback is a known context so it is correct to always
disable interrupts.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It is always called from thread context.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
This commit reworks the RAM detection algorithm, using RAM-per-LTC to
determine whether a board has a mixed-memory configuration instead of
using RAM-per-FBPA. I'm not certain the algorithm is perfect, but it
should handle all currently known configurations in the very least.
This should fix GTX 970 boards with 4GiB of RAM where the last 512MiB
isn't fully accessible, as well as only detecting half the VRAM on
GF108 boards.
As a nice side-effect, GP10x memory detection now reuses the majority
of the code from earlier chipsets.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GF108/GM107 implementations will want slightly different functions for
the upcoming RAM detection improvements.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
