ACPICA commit 403b8b0023fd7549b2f9bf818fcc1ba481047b69
If non-AML files are used with the -e option, the disassembler
can fault. The fix is to ensure that all -e files are either
SSDTs or a DSDT. ACPICA BZ 1158.
Link: https://github.com/acpica/acpica/commit/403b8b00
Reference: https://bugs.acpica.org/show_bug.cgi?id=1158
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36
Link: https://github.com/acpica/acpica/commit/8990e73a
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After the new table reading utility functions are well tested, acpidump can
also switch to use the generic acpi_ut_read_table_xxx() APIs. Currently
this patch is no-op as acpidump does not link to the new APIs.
This patch is only useful for ACPICA applications, most of which are not
shipped in the Linux kernel.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit aae576e5faefa8ba70647efa320d4747b6375f1e.
Push and Pop are not portable "enough", and caused problems for
some ACPICA customers.
Signed-off-by: Robert Moore <Robert.Moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use push and pop to both guarantee that the correct alignment is used,
and to restore the alignment to whatever it was before the header
was included.
It is reported that the #pragma pack(push/pop) directives are not supported
by the specific GCCs, but this patch still doesn't affect kernel build
as there are already #pragma pack([1]) directives used in the old ACPICA
headers, which means there shouldn't be GCCs that are currently used to
compile the ACPI kernels do not support #pragma pack() directives.
References: https://bugs.acpica.org/show_bug.cgi?id=1058
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This command "test objects" will exercise the entire namespace by
writing new values to each data object, and ensuring that the write
was successful. The original value is then restored and verified.
This patch doesn't affect kernel behavior as the debugger is
currently not shipped in the Linux source tree.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update ACPICA copyrights to 2014. Includes all source headers and
signons for the various tools.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch reflects the improvment of a cleanup step which is performed in
the release process.
There are still spaces in the "linuxized" ACPICA files after special macro
invocations. This is because indent treats comments and pre-processor
directives as spaces, thus we need to skip them.
Before applying this patch, cleanup code will search from keyword back to
end of line and wipe spaces between them.
After applying this patch, cleanup code will search to the end of the macro
invocations, skip "empty lines", "comments" and "pre-processor directives",
then wipe the spaces between the new line and the first non-spaces
characters.
Following improvements are thus achieved in the release automation by this
commit which are originally maintained manually:
- acpi_status acpi_ev_remove_global_lock_handler(void);
+acpi_status acpi_ev_remove_global_lock_handler(void);
- acpi_status
+acpi_status
acpi_ev_match_gpe_method(acpi_handle obj_handle,
- acpi_status acpi_subsystem_status(void);
+acpi_status acpi_subsystem_status(void);
- acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type,
+acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type,
- acpi_status
+acpi_status
acpi_acquire_mutex(acpi_handle handle, acpi_string pathname, u16 timeout);
- acpi_status
+acpi_status
acpi_get_sleep_type_data(u8 sleep_state, u8 *slp_typ_a, u8 *slp_typ_b);
- acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
Some empty lines are restored by this commit due to the change of the
removal implementation.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During the automatic translation of the upstream ACPICA source code
into Linux kernel source code some extra white spaces are added by
the "indent" program at the beginning of each line which is an
invocation of a macro and there is no ";" at the end of the line.
For this reason, a new mode has been added to the translation scripts
to remove the extra spaces inserted before invoking such macros and add
an empty line between the invocations of such macros (like the other
function declarations). This new mode is executed after executing
"indent" during the Linux release process. Consequently, some
existing ACPICA source code in the Linux kernel tree needs to be
adjusted to allow the new scripts to work correctly.
The affected macros and files are:
1. ACPI_HW_DEPENDENT_RETURN (acpixf.h/acdebug.h/acevents.h):
This macro is used as a wrapper for hardware dependent APIs to offer
a stub when the reduced hardware is configured during compilation.
2. ACPI_EXPORT_SYMBOL (utglobal.c):
This macro is used by Linux to export symbols to be found by Linux
modules. All such invocations are well formatted except those
exported as global variables.
This can help to reduce the source code differences between Linux
and upstream ACPICA, and also help to automate the release process.
No functional or binary generation changes should result from it.
Lv Zheng.
[rjw: Changelog]
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The original upstream ACPICA change added full history and limited
line editing to the debugger:
This change adds full history and limited line editing for Unix and
Linux systems. It does not use readline() because of portability issues.
Instead it uses the POSIX termio interface to put the terminal in raw
input mode so that the various special keys can be trapped (such as
up-arrow and down-arrow for history support).
Since the debugger is not shipped in the kernel, it only is necessary
to update one header file to keep the kernel source in sync with the
upstream.
[rjw: Changelog]
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Paths command displays the full pathname and object type for
the entire namespace. Alternative to the Namespace command.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support to allow hosts to install System Control
Interrupt handlers. Certain ACPI functionality requires the host
to handle raw SCIs. For example, the "SCI Doorbell" that is defined
for memory power state support requires the host device driver to
handle SCIs to examine if the doorbell has been activated. Multiple
SCI handlers can be installed to allow for future expansion.
Debugger support is included.
Lv Zheng, Bob Moore. ACPICA BZ 1032.
Bug summary:
It is reported when the PCC (Platform Communication Channel, via
MPST table, defined in ACPI specification 5.0) subchannel responds
to the host, it issues an SCI and the host must probe the subchannel
for channel status.
Buglink: http://bugs.acpica.org/show_bug.cgi?id=1032
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Includes all source headers and signons for the various tools.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Created logical splits for eight new files. Improves modularity
and configurability.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Debugger improvements in ACPICA are always ignored by ACPICA Linux
release. This will lead to divergences between Linux and ACPICA.
This patch fixes such unmerged debugger updates.
Following patches are included:
1. Fixed a couple compiler warnings for extra extern
Wed, 14 Mar 2007 21:12:19 +0000
2. Cleanup for internal Reference Object.
Wed, 27 Aug 2008 10:11:30 -0700
3. Debugger: Lock method args for multithread command.
Fri, 24 Apr 2009 12:28:49 -0700
4. Debugger: Add max count argument for Batch command.
Tue, 29 Sep 2009 12:31:58 -0700
5. Add new host interfaces for _OSI support.
Thu, 5 Aug 2010 14:18:28 -0700
6. Increase debugger buffer size for method return objects.
Wed, 17 Nov 2010 13:48:30 -0800
7. Debugger: Add command to display status of global handlers.
Tue, 25 Jan 2011 13:47:58 -0800
8. Debugger: Split large dbcmds.c file.
Wed, 26 Jan 2011 13:03:41 -0800
9. Debugger/AcpiExec: Add support to pass complex args to methods.
Tue, 17 May 2011 13:33:39 -0700
10.Debugger: Add Template command to dump resource templates.
Fri, 28 Oct 2011 14:18:51 -0700
11.Support for custom ACPICA build for ACPI 5.0 reduced hardware.
Wed, 1 Feb 2012 13:18:17 -0800
12.Debugger: Improve command help support.
Wed, 15 Feb 2012 07:59:26 -0800
13.Update ACPI_HW_DEPENDENT* macro invocations.
Wed, 15 Feb 2012 08:14:08 -0800
14.Debugger: Rename function to simplify source code conversion.
Wed, 13 Jun 2012 14:23:06 -0700
15.Debugger: Enhance "Tables" and "Unload" commands.
Fri, 29 Jun 2012 13:10:58 -0700
16.Debugger: update prototype for AcpiDbSleep function.
Fri, 17 Aug 2012 13:43:02 -0700
This patch will not affect the generated vmlinx binary.
This will decrease 264 lines of 20120913 divergence.diff.
Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add ACPI_REDUCED_HARDWARE flag that removes all hardware-related
code (about 10% code, 5% static data).
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Update all copyrights to 2012.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Adds install/remove interfaces so that the host can dynamically
alter the global _OSI table. Also adds support for _OSI handlers.
Additional support: new debugger command (osi), and test support in
the acpiexec utility. Adds new file, utilities/utosi.c.
ACPICA bugzilla 836.
The Linux OSL _OSI code is also changed.
acpi_osi_setup can't call acpi_install/remove_interface because ACPICA
is not initialized yet at this early time.
So we just save the osi string in acpi_osi_setup and will handle it
later in a new function acpi_osi_setup_late.
http://www.acpica.org/bugzilla/show_bug.cgi?id=836
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com
Signed-off-by: Len Brown <len.brown@intel.com>
Add 2010 copyright to all module headers and signons, including
the Linux header. This affects virtually every file in the ACPICA
core subsystem, iASL compiler, and all utilities.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Two duplicates in acdebug.h.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>