There is some disagreement between the partition table map in Linux
for the DA850-EVM and the corresponding partition map in U-Boot.
To prevent breaking the Kernel, this patch enables MTD_CMDLINE_PARTS
which will allow the U-Boot to pass the partition map so future partitions
match without breaking backwards compatibility.
While at it, also sync to savedefconfig which leads to removal of
CONFIG_MMC_BLOCK_BOUNCE.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
-----BEGIN PGP SIGNATURE-----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=fNM2
-----END PGP SIGNATURE-----
Merge tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Brazil's Independence Day pull request :-)
This is one of the biggest media pull requests, with 625 patches
affecting almost all parts of media (RC, DVB, V4L2, CEC, docs).
This contains:
- A lot of new drivers:
* DVB frontends: mxl5xx, stv0910, stv6111;
* camera flash: as3645a led driver;
* HDMI receiver: adv748X;
* camera sensor: Omnivision 6650 5M driver (ov6650);
* HDMI CEC: ao-cec meson driver;
* V4L2: Qualcom camss driver;
* Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers.
- The DDbridge DVB driver got a massive update, with makes it in sync
with modern hardware from that vendor;
- There's an important milestone on this series: the DVB
documentation was written in 2003, but only started to be updated
in 2007. It also used to contain several gaps from the time it was
kept out of tree, mentioning error codes and device nodes that
never existed upstream. On this series, it received a massive
update: all non-deprecated digital TV APIs are now in sync with the
current implementation;
- Some DVB APIs that aren't used by any upstream driver got removed;
- Other parts of the media documentation algo got updated, fixing
some bugs on its PDF output and making it compatible with Sphinx
version 1.6.
As the number of hacks required to build PDF output reduced, I hope
we'll have less troubles as newer versions of our documentation
toolchain are released (famous last words);
- As usual, lots of driver cleanups and improvements"
* tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits)
media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency
media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers
media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay"
media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space
media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"
media: add qcom_camss.rst to v4l-drivers rst file
media: dvb headers: make checkpatch happier
media: dvb uapi: move frontend legacy API to another part of the book
media: pixfmt-srggb12p.rst: better format the table for PDF output
media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
media: index.rst: don't write "Contents:" on PDF output
media: pixfmt*.rst: replace a two dots by a comma
media: vidioc-g-fmt.rst: adjust table format
media: vivid.rst: add a blank line to correct ReST format
media: v4l2 uapi book: get rid of driver programming's chapter
media: format.rst: use the right markup for important notes
media: docs-rst: cardlists: change their format to flat-tables
media: em28xx-cardlist.rst: update to reflect last changes
media: v4l2-event.rst: adjust table to fit on PDF output
media: docs: don't show ToC for each part on PDF output
...
Sometimes root file system is deployed on SD card. It's
proper to build eSDHC driver into kernel.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable new Aspeed drivers for i2c, lpc snoop and vuart
- Set VMSPLIT_2G for ast2400 platforms, required for mtd driver
-----BEGIN PGP SIGNATURE-----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=brUg
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.14-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
Pull "Aspeed defconfig updates for 4.14" from Joel Stanley:
- Enable new Aspeed drivers for i2c, lpc snoop and vuart
- Set VMSPLIT_2G for ast2400 platforms, required for mtd driver
* tag 'aspeed-4.14-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
These drivers have been recently upstreamed, so add them to the
defconfigs.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is required for the SMC controller mapping windows on the AHB
Bus.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables the tinydrm and ST7586 panel modules used by the display
on LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
There is no dependency between the two, so remove the dependency in
Kconfig files.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Enables the ChipIdea UDC driver and selects some symbols that were
previously being selected by other drivers but will no longer be in
v4.14.
-----BEGIN PGP SIGNATURE-----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=mYch
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Pull "ARM: tegra: Default configuration updates for v4.14-rc1" from Thierry Reding:
Enables the ChipIdea UDC driver and selects some symbols that were
previously being selected by other drivers but will no longer be in
v4.14.
* tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
- Enable SPI_GPIO and GPIO_74X164 support which are useful for some
boards like imx7d-sabresd.
- Enable build of CODA video codec and staging video4linux drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloiPAAoJEFBXWFqHsHzOK9AH/2m3J8waqDJW1ln6emcBCB7X
2LSHk+66UGN+V4rchXHtrdfjjrpszaRtregW29qCYqwATA+ZEmtCey6MR/8krzBk
exjYOfZTDXvAqnVnbr5JT+/PWVzDKCLHLSVEMXZ3V2ylM0ps4Pdb1G19RxWg58HO
tE69x1lIyHEphpaZ/xvVuD7k8BrTBYdgVn41qwlzZwZsiHIXLSih3wirxX911C11
V3yWoFAG9NZ1qjIJEYn1m/wtpWtyUu8IRDiZlHyodlR+ffeE43Hgh2+Ih/lqyKrm
SH4U0fN0D7Tta08/2MvPeHsGCnppk4kWs0tZDafUd8qOb+MPi3NzNDI2Y7QRktM=
=ljhX
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Pull "i.MX defconfig updates for 4.14" from Shawn Guo:
- Enable SPI_GPIO and GPIO_74X164 support which are useful for some
boards like imx7d-sabresd.
- Enable build of CODA video codec and staging video4linux drivers.
* tag 'imx-defconfig-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
ARM: imx_v6_v7_defconfig: Select the coda driver as module
ARM: imx_v6_v7_defconfig: Enable GPIO_74X164
ARM: imx_v6_v7_defconfig: Enable SPI_GPIO
for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
- Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI
mini UART is enabled by default, the default CMA pool is bumped up to 32MB to
support VC4 usages and finally BRCMFMAC is enabled as module since this is the
wireless driver used on Raspberry Pi Zero Wireless.
-----BEGIN PGP SIGNATURE-----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=+2/I
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Pull "Broadcom defconfig changes for 4.14" from Florian Fainelli:
This pull request contains defconfig file changes for Broadcom ARM-based SoCs
for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
- Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI
mini UART is enabled by default, the default CMA pool is bumped up to 32MB to
support VC4 usages and finally BRCMFMAC is enabled as module since this is the
wireless driver used on Raspberry Pi Zero Wireless.
* tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
ARM: bcm2835_defconfig: Enable wifi driver for RPi Zero W
ARM: bcm2835_defconfig: Increase CMA for VC4
ARM: bcm2835_defconfig: Enable Mini UART console support
* Enable BQ32000 rtc in shmobile_defconfig
Biju Das says "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To
increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZlVq6AAoJENfPZGlqN0++HoIQAIVxNObs37IPVp/pNK8C7zzK
K+6xpcTsI2vT0/h3nFfWF0t0kOU5rQBMUOrL03NKsyVo2MWudAHXsnhn1tIyfvJ9
ZJkocWLxjWJieQIOHOZ/a0yA8wsQu5o5fXs0FVb4VSckvVyFXGqn9NGkvKrVz4Yn
4vYKE5BLv7o4yiqsKgapLq03QWBP9+QPr/4OIzKVFpSy1lgEIBsrh8n2OsHuYnfd
vyOed/yOQBKlsvlp3ErX3zLsWZ2U3PlIhjOzXSpQTnJxq9pP85cc55KM63JY+amX
2RJANcR/5iTjr7vkpQOAqSYAyflabhLtIm9JMwsWDljxMhaVmILNd4+7z0tKhkto
gPGU2gJdXcMVHBV9Wl+RSPp3BzNj4b6RP8Sj6m9z5umnn+ZUS3yH5wRGRHcFVKTg
alTwh3TnDf6OaxhD7KiREwSDb798bFzJINtcFkUZm12Uk+fX6e6J5SwxOaxIpX5R
NiE0qnOm8pYextIh6G2U+jhX48YHbUmhzRAQgLPzvVZLkHohWBYb0Kct9I3N1N/y
9dka1rVqqmi+XQqpKBRH5BWUgBKq8wQFJ8dxwtzoj9IeYMEPZ7LjaC980IRo1gBv
Hz0Vd268qjEynh+3fa3bcH8wt6P6tyNdIrvLAQDUXcWYntWDYJZVHWqugNi+nBc0
zif2WdZ2v5RjifkjAzTp
=nQRM
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Pull "Second Round of Renesas ARM Based SoC Defconfig Updates for v4.14"
from Simon Horman:
* Enable BQ32000 rtc in shmobile_defconfig
Biju Das says "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To
increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration."
* tag 'renesas-defconfig2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig
Since NVIDIA Tegra is supported now by the ChipIdea USB driver, let's
enable this driver in tegra_defconfig.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
multi_v7_defconfig, as modules.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
tegra_defconfig, as built-ins.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regenerate the default configuration on top of v4.13-rc1. This shuffles
around a couple of symbols and drops some that have become defaults or
which were dropped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
phy driver on dra72x and dra71x evm, and LP87565 that is
on dra76-evm.
-----BEGIN PGP SIGNATURE-----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=2tUZ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Pull "defconfig changes for omaps for v4.14" from Tony Lindgren:
Defconfig updates for omaps for v4.14 to enable DP83867
phy driver on dra72x and dra71x evm, and LP87565 that is
on dra76-evm.
* tag 'omap-for-v4.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable LP87565
ARM: omap2plus_defconfig: enable DP83867 phy driver
Sunxi_defconfig is refreshed and various power supply and ADC drivers
of the AXP PMICs have been enabled.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAlmH12AOHHdlbnNAY3Np
ZS5vcmcACgkQOJpUIZwPJDCVdA/7Bhw+Zuhr2rA3N13SQYeYUNfm2Uu53zToNrUc
WSsWwhc2XfkPDNHRkcYx0s5n6/Ouiw7W32c+uCt9HhfbXA02r/Vz7WrWRXXY83e4
2zGNXsVVLN9AU/fYXomzcfyZI0qxLzoTXPF4U5YYI1QazvSs0L8p1SNKpu15PUbH
p5HMao3cYR8EVXyKxALq5GpIxv0Sd7C7UXA/D7op7oIZOkQaHBhXuQb5mgub1x8t
Vbrd/KmI+nmNqm+1/gJ3jMd9KYfRE5DDY0WZH8z62GZ8oUE89VmyoFQzX53qPHAY
NHJ7LPR2Fo7z6k2JDKERhOFb+3BHmjySDfwEzfovFPbMgG+Yrca0EDVWBK0X3Rc3
sZtmgTbywX1Im3VlZkWdtLSqaMf6igWNQQ5y9dID2rwQx/+ys8S9ldL1Afhgh3n7
kdYHKCt4rju/U/kykr9BZnZyZsmRPO3qoXKjV2yWkgClxxtAcYiqtRSSswqSNNCU
BCh3takfi2hZRSgY4bz6KirkJmRMDJ5HkU7Noz1nGHEoXOsjyTnvX9r4RBf5OlSo
iwhgWCnOecHdO6pV8qcwePrH9HXKOAHMquzMKBv65NJLDtvNXCsharFMk7isQUFa
OqyPANOCGsJIiPnukli44wBD6Nrk59esckeQzYEbdg3LwYYPpfeShQaBim4SCgxu
sPwrqYo=
=nZWf
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Pull "Allwinner defconfig changes for 4.14" from Chen-Yu Tsai:
Sunxi_defconfig is refreshed and various power supply and ADC drivers
of the AXP PMICs have been enabled.
* tag 'sunxi-defconfig-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: sunxi: Add AXP20X_ADC
arm: sunxi: Add additional power supplies
arm: sunxi: refresh the defconfig
* Enable DMA for Renesas serial ports
Geert Uytterhoeven says, "DMA for (H)SCIF(A|B) serial ports on Renesas
R-Car Gen2 and RZ/G1 SoCs is considered stable, hence enable it by
default.".
* Enable Ethernet AVB
For the iWave RZ/G1M Q7 SOM
* Replace DRM_RCAR_HDMI by generic bridge options
* Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
* Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
* Enable missing PCIE_RCAR dependency
Defconfig updates for various Kconfig updates covering
renamed Kconfig symbols, now missing dependancies and so on.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qKJg
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Pull "Renesas ARM Based SoC Defconfig Updates for v4.14" from Simon Horman:
* Enable DMA for Renesas serial ports
Geert Uytterhoeven says, "DMA for (H)SCIF(A|B) serial ports on Renesas
R-Car Gen2 and RZ/G1 SoCs is considered stable, hence enable it by
default.".
* Enable Ethernet AVB
For the iWave RZ/G1M Q7 SOM
* Replace DRM_RCAR_HDMI by generic bridge options
* Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
* Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
* Enable missing PCIE_RCAR dependency
Defconfig updates for various Kconfig updates covering
renamed Kconfig symbols, now missing dependancies and so on.
* tag 'renesas-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable DMA for Renesas serial ports
ARM: multi_v7_defconfig: Replace DRM_RCAR_HDMI by generic bridge options
ARM: multi_v7_defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
ARM: shmobile: defconfig: Refresh
ARM: shmobile: defconfig: Enable DMA for serial ports
ARM: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge options
ARM: shmobile: defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
ARM: shmobile: defconfig: Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
ARM: shmobile: defconfig: Enable missing PCIE_RCAR dependency
ARM: shmobile: defconfig: Enable Ethernet AVB
Cleanup ARMv7 defconfigs from options not existing anymore.
-----BEGIN PGP SIGNATURE-----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=pK83
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-arm-cleanups-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Pull "Bunch of ARM defconfig cleanups for v4.14" from Krzysztof Kozłowski:
Cleanup ARMv7 defconfigs from options not existing anymore.
* tag 'samsung-defconfig-arm-cleanups-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: qcom_defconfig: Cleanup from non-existing options
ARM: ezx_defconfig: Cleanup from non-existing options
ARM: vexpress_defconfig: Cleanup from non-existing options
ARM: ixp4xx_defconfig: Cleanup from non-existing options
ARM: multi_v7_defconfig: Cleanup from non-existing options
dra76-evm has LP87565. Enable it in omap2plus_defconfig.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the rockchip PHY driver for multi_v7_defconfig builds.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TI's DP83867 phy is used on DRA72x EVM rev C and DRA71x
EVMs. Enable support for it in omap2plus_defconfig.
The driver is built into the kernel to help NFS booting.
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable C_CAN/D_CAN driver supported by 66AK2G
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the TI OMAP HSMMC and fixed regulator support
for keystone platforms.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
DMA for (H)SCIF(A|B) serial ports on Renesas R-Car Gen2 and RZ/G1 SoCs
is considered stable, hence enable it by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The manual bridge implementation was removed in favor of the generic
one, so now we need to enable standard bridge drivers like
DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511.
Both were already enabled, but the (newer) ADV7511 audio part wasn't.
Fixes: 5c602531fe ("drm: rcar-du: Replace manual bridge implementation with DRM bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
- Several options were moved,
- INPUT_MOUSEDEV_PSAUX is no longer enabled by default since commit
73d8ef7600 ("Input: mousedev - stop offering PS/2 to userspace
by default").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
DMA for (H)SCIF(A|B) serial ports on R-Car Gen2 and RZ/G1 SoCs is
considered stable, hence enable it by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The manual bridge implementation was removed in favor of the generic
one, so now we need to enable standard bridge drivers like
DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511.
DRM_I2C_ADV7511 was already enabled, but the (newer) audio part wasn't.
Fixes: 5c602531fe ("drm: rcar-du: Replace manual bridge implementation with DRM bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
USB_XHCI_RCAR is no longer enabled, as it now has a dependency on
USB_XHCI_PLATFORM, instead of selecting USB_XHCI_PLATFORM.
As the latter selects the former if ARCH_RENESAS, fix this by replacing
USB_XHCI_RCAR by USB_XHCI_PLATFORM in shmobile_defconfig.
Fixes: f879fc32aa ("usb: host: xhci-rcar: Avoid long wait in xhci_reset()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
PCIE_RCAR is no longer enabled, as it now has a dependency on
PCI_MSI_IRQ_DOMAIN instead of selecting PCI_MSI and PCI_MSI_IRQ_DOMAIN.
Fix this by explicitly enabling PCIE_RCAR in shmobile_defconfig.
Fixes: 3ee803641e ("PCI/MSI: irqchip: Fix PCI_MSI dependencies")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel KSZ9031MNX).
Gigabit Ethernet support is available in Renesas AVB driver.
To increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable i.MX v4l2 media staging driver. For video capture on i.MX, the
video multiplexer subdev is required. On the SabreAuto, the ADV7180
video decoder is required along with i2c-mux-gpio. The Sabrelite
and SabreSD require the OV5640 and the SabreLite requires PWM clocks
for the OV5640.
Increase max zoneorder to allow larger video buffer allocations.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
AXP20X_POWER depends on IIO. Even though it does not depend on AXP20X_ADC,
it is the new, preferred way of getting power supply configuration, it's
going to be enabled anyway.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A bunch of new power supplies have been added recently to handle the
batteries and the AC-IN plugs. Add them to our defconfig.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Update the defconfig with the current state of defaults.
This was done using make sunxi_defconfig; make savedefconfig
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the TI SYSCON and TI-SCI reset drivers for Keystone
platforms. These drivers will provide the reset functionality
for devices like DSPs or PRU-ICSSs. There are no devices that
require these to be built-in, so these are enabled as modules.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable the TI-SCI core protocol and the corresponding genpd
driver to enable the essential infrastructure for various
device drivers on the 66AK2G family of SoCs. The TI-SCI Clock
driver is automatically enabled for ARCH_KEYSTONE.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Message Manager is a communication hardware block on 66AK2G[1] SoCs.
Enable the same to provide support for communication with 66AK2G Power
Management Micro Controller (PMMC) via the TISCI protocol[2].
[1] http://www.ti.com/product/66ak2g02
[2] http://processors.wiki.ti.com/index.php/TISCI
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
This enables the wifi driver for Raspberry Pi Zero W. We need
to build this as a module otherwise the drivers tries to load the
firmware before the root partition is mounted.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
The VC4 needs more memory than the default setting:
cma: cma_alloc: alloc failed, req-size: 4096 pages, ret: -12
vc4-drm soc:gpu: failed to allocate buffer with size 16777216
So increase the value to 32 MB and fix this issue.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Since pl011 is connected to the BT chip, we need to enable the Mini
UART for serial console.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
