It will be used by next pagefault tracing patches in the series.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403799268-1367-2-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to use two strcmp calls per syscall entry, do it just once, when
reading the per syscall info.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lymtxhz0mg3adyt5e2pssn8f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thread->priv value is already obtained a few lines earlier from the
thread__trace() call. Leftovers from before thread__trace().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-96laa634vzfwlwxurevo40wp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SIGSTKFLT is not defined on alpha, mips or sparc.
SIGEMT and SIGSWI are defined on some architectures and should be
decoded here if so.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 8bad5b0abf ('perf trace: Beautify signal number arg in several syscalls')
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648441.3003.101.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Supporting decoding the ioctl 'request' parameter needs more work to
properly support more architectures, the current approach doesn't work
on at least powerpc and sparc, as reported by Ben Hutchings in
http://lkml.kernel.org/r/1391593985.3003.48.camel@deadeye.wl.decadent.org.uk .
Work around that by making it to be ifdefed for the architectures known
to work with the current, limited approach, i386 and x86_64 till better
code is written.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: <stable@vger.kernel.org> # 3.13 Fixes: 78645cf3ed ("perf trace: Initial beautifier for ioctl's 'cmd' arg")
Link: http://lkml.kernel.org/n/tip-ss04k11insqlu329xh5g02q0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
glibc 2.17 is missing this on sparc, despite the fact that it's not
architecture-specific.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 49af9e93ad ('perf trace: Beautify eventfd2 'flags' arg')
Cc: <stable@vger.kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is how the option summary describes it and so that we can free
--delay to replace --initial-delay and then be consistent with stat's
--delay equivalent option.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f8hd2010uhjl2zzb34hepbmi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing further boilerplate after making sure perf_evlist__munmap can
be called multiple times for the same evlist.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o0luenuld4abupm4nmrgzm6f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it is safe to call perf_evlist__close() multiple times, autoclose
it and remove the calls to the close from existing tools, reducing the
tooling boilerplate.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2kq9v7p1rude1tqxa0aue2tk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of requiring tools to do an extra destructor call just before
calling perf_evlist__delete.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0jd2ptzyikxb5wp7inzz2ah2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we have the boilerplate in the preparation method, instead of
open coded in tools wanting the reporting when the exec fails.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-purbdzcphdveskh7wwmnm4t7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the frequent idiom of:
free(ptr);
ptr = NULL;
Make it expect a pointer to the pointer being freed, so that it becomes
clear at first sight that the variable being freed is being modified.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfw02ezuab37kha18wlut7ir@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce typing, functions use class__method convention, so unlikely to
clash with other libraries.
This actually was discussed in the "Link:" referenced message below.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Getting a divide by 0 when events are processed from a file:
perf trace -i perf.data -s
...
dnsmasq (1684), 10 events, inf%, 0.000 msec
The problem is that the event count is not incremented as events are
processed. With this patch:
perf trace -i perf.data -s
...
dnsmasq (1684), 10 events, 8.9%, 0.000 msec
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older kernels (e.g., RHEL6) do system call tracing via
syscalls:sys_{enter,exit} rather than raw_syscalls. Update perf-trace to
detect lack of raw_syscalls support and try syscalls.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to get the proper plugins processing we need to use full
trace-event interface when creating tracepoint events. So far we were
using shortcut to get the parsed format.
Moving current 'event_format__new' function into trace-event object as
'trace_event__tp_format'.
This function uses properly initialized global trace-event object,
ensuring proper plugins processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently trace command supports '-m' option, but does not honours its
value and keeps the default.
Changing the perf_evlist__mmap function call to use the '-m' configured
value.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1385657842-8914-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thread summary line coloring looks ugly. It doesn't add much value so
remove coloring completely.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1384447410-1771-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Getting unwieldly long, for this app domain should be descriptive enough
and the use of __ to separate the class from the method names should
help with avoiding clashes with other code bases.
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per request from Pekka make --summary a summary only option meaning do
not show the individual system calls. Add another option to see all
syscalls along with the summary. In addition use 's' and 'S' as
shortcuts for the options.
Requested-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Pekka Enberg <penberg@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1384273875-3751-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch duration order to minimum, average, maximum for the '--summary'
command line option because it's more natural to read.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384265410-12344-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When replaying a previous record session, it'll get a segfault since it
doesn't initialize raw_syscalls enter/exit tracepoint's evsel->priv for
caching the format fields.
So fix it by properly initializing sys_enter/exit evsels that comes from
reading the perf.data file header.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-2-git-send-email-namhyung@kernel.org
[ Split the syscall tp field caching part in the previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to set this in evsels coming out of a perf.data file header, not
just for new ones created for live sessions.
So separate the code that caches the syscall entry/exit tracepoint
format fields into a new function that will be used in the next
changeset.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112115700.GC4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fifth argument of mmap syscall is fd and it often contains -1 as a
value for anon mappings. Without this patch it doesn't show the file
name as well as it shows -1 as 4294967295.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several tools (top, kvm) don't need to be called back to process each of
the syntheiszed records, instead relying on the machine__process_event
function to change the per machine data structures that represent
threads and mmaps, so provide a way to ask for this common idiom.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pusqibp8n3c4ynegd1frn4zd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Further simplifications to be done on following patch, as most tools
don't use the callback, using instead just the canned
machine__process_event one.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r1m0vuuj3cat4bampno9yc8d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf_event_attr.mmap_data is set the kernel will generate
PERF_RECORD_MMAP events when non-exec (data, SysV mem) mmaps are
created, so we need to synthesize from /proc/pid/maps for existing
threads, as we do for exec mmaps.
Right now just 'perf record' does it, but any other tool that uses
perf_event__synthesize_thread(s|map) can request it.
Reported-by: Don Zickus <dzickus@redhat.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ihwzraikx23ian9txinogvv2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most uses of the evsel constructor are followed by a call to
perf_evlist__add with an idex of evlist->nr_entries, so make rename
the current constructor to perf_evsel__new_idx and remove the need
for passing the constructor for the common case.
We still need the new_idx variant because the way groups are handled,
with evsel->nr_members holding the number of entries in an evlist,
partitioning the evlist into sublists inside a single linked list.
This asks for a clarifying refactoring, but for now simplify the non
parser cases, so that tool writers don't have to bother with evsel idx
setting.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zy9tskx6jqm2rmw7468zze2a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead do the lookups just when creating the tracepoints, initially for
the most common, raw_syscalls:sys_{enter,exit}.
It works by having evsel->priv have a per tracepoint structure with
entries for the fields, for direct access, with the offset and a
function to get the value from the sample, doing the swap if needed.
Using a simple workload that does M millions write syscalls, we go from:
# perf stat -i -e cycles /tmp/oldperf trace ./sc_hello 100 > /dev/null
Performance counter stats for '/tmp/oldperf trace ./sc_hello 100':
8,366,771,459 cycles
2.668025928 seconds time elapsed
# perf stat -i -e cycles perf trace ./sc_hello 100 > /dev/null
Performance counter stats for 'perf trace ./sc_hello 100':
8,345,187,650 cycles
2.631748425 seconds time elapsed
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyfhvoo510a5i10b27dnvm88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not needed since this cset:
fcf65bf149: perf evsel: Cache associated event_format
So lets trim this struct a bit.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j8setslokt0goiwxq9dogzqm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This new COMM infrastructure provides two features:
1) It keeps track of all comms lifecycle for a given thread. This way we
can associate a timeframe to any thread COMM, as long as
PERF_SAMPLE_TIME samples are joined to COMM and fork events.
As a result we should have more precise COMM sorted hists with seperated
entries for pre and post exec time after a fork.
2) It also makes sure that a given COMM string is not duplicated but
rather shared among the threads that refer to it. This way the threads
COMM can be compared against pointer values from the sort
infrastructure.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hwjf70b2wve9m2kosxiq8bb3@git.kernel.org
[ Rename some accessor functions ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
[ Use __ as separator for class__method for private comm_str methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we can later delimit a lifecycle for the COMM and map a hist to
a precise COMM:timeslice couple.
PERF_RECORD_COMM and PERF_RECORD_FORK events that don't have
PERF_SAMPLE_TIME samples can only send 0 value as a timestamp and thus
should overwrite any previous COMM on a given thread because there is no
sensible way to keep track of all the comms lifecycles in a thread
without time informations.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6tyow99vgmmtt9qwr2u2lqd7@git.kernel.org
[ Made it cope with PERF_RECORD_MMAP2 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tail position of the event buffer should only be modified after
actually use that event.
If not the event buffer could be invalid before use, and segment fault
occurs when invoking perf top -G.
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Cc: David Ahern <dsahern@gmail.com>
Cc: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Link: http://lkml.kernel.org/r/1382600613-32177-1-git-send-email-zhouzhouyi@gmail.com
[ Simplified the logic using exit gotos and renamed write_tail method to mmap_consume ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is adding 'struct perf_data_file' object as a placeholder for
all attributes regarding perf.data file handling. Changing
perf_session__new to take it as an argument.
The rest of the functionality will be added later to keep this change
simple enough, because all the places using perf_session are changed
now.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381847254-28809-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of 'perf trace', should be used by other tools that uses
tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lyvtxhchz4ga8fwht15x8wou@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to differentiate SIGCHLD from SIGINT, the later should cause as
immediate as possible exit, while the former should wait to process the
events that may be perceived in the ring buffer after the SIGCHLD is
handled.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vf6n57ewm3mjy2sz6r491hus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Initially it tries to find a probe:vfs_getname that should be setup
with:
perf probe 'vfs_getname=getname_flags:65 pathname=result->name:string'
or with slight changes to cope with code flux in the getname_flags code.
In the future, if a "vfs:getname" tracepoint becomes available, then it
will be preferred.
This is not strictly required and more expensive method of reading the
/proc/pid/fd/ symlink will be used when the fd->path array entry is not
populated by a previous vfs_getname + open syscall ret sequence.
As with any other 'perf probe' probe the setup must be done just once
and the probe will be left inactive, waiting for users, be it 'perf
trace' of any other tool.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ujg8se8glq5izmu8cdkq15po@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the part that grows the array as needed is untied from the code
that reads the /proc/pid/fd symlink and can be used for the vfs_getname
hook that will set the fd -> path translation too, when available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ydo5rumyv9hdc1vsfmqamugs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, execution of 'perf trace' reports the following cryptic
message to the user:
$ perf trace
Couldn't read the raw_syscalls tracepoints information!
Typically this happens because the user does not have permissions to
read the debugfs filesystem. Also handle the case when the kernel was
not compiled with debugfs support or when it isn't mounted.
Now, the tool prints detailed error messages:
$ perf trace
Error: Unable to find debugfs
Hint: Was your kernel was compiled with debugfs support?
Hint: Is the debugfs filesystem mounted?
Hint: Try 'sudo mount -t debugfs nodev /sys/kernel/debug'
$ perf trace
Error: No permissions to read /sys/kernel/debug//tracing/events/raw_syscalls
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/'
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1380863851-14460-1-git-send-email-artagnon@gmail.com
[ Added ready to use commands to fix the issues as extra hints, use the
current debugfs mount point when reporting permission error, use
strerror_r instead of the deprecated sys_errlist, as reported by David Ahern ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now when an index passed to that method has no string associated
it'll print the index as a decimal number, prepare it so that we can use
it to print it in hex as well, for ioctls, for instance.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nsvy06sqj64qvnkmzvwxsx2v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the index passed doesn't have to start at zero, being
decremented from an offset specified when declaring the strarray before
being used as the real array index.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k1ce6uqyt4qar9edrj3mevod@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the new machine method that loops over threads to dump summary data.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The record option is a convience alias to include the -e raw_syscalls:*
argument to perf-record. All other options are passed to perf-record's
handler. Resulting data file can be analyzed by perf-trace -i.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Task comm's are getting lost when processing events from a file. The
problem is that the trace struct used by the live processing has its
host machine and the perf-session used for file based processing has its
host machine. Fix by having both references point to the same machine.
Before:
0.030 ( 0.001 ms): :27743/27743 brk( ...
0.057 ( 0.004 ms): :27743/27743 mmap(len: 4096, prot: READ|WRITE, flags: ...
0.075 ( 0.006 ms): :27743/27743 access(filename: 0x7f3809fbce00, mode: R ...
0.091 ( 0.005 ms): :27743/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ...
...
After:
0.030 ( 0.001 ms): make/27743 brk( ...
0.057 ( 0.004 ms): make/27743 mmap(len: 4096, prot: READ|WRITE, flags: ...
0.075 ( 0.006 ms): make/27743 access(filename: 0x7f3809fbce00, mode: R ...
0.091 ( 0.005 ms): make/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ...
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-4-git-send-email-dsahern@gmail.com
[ Moved creation of new host machine to a separate constructor: machine__new_host() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For live sessions we can just access /proc to map an fd to its path, on
a best effort way, i.e. sometimes the fd will have gone away when we try
to do the mapping, as it is done in a lazy way, only when a reference to
such fd is made then the path will be looked up in /proc.
This is disabled when processing perf.data files, where we will have to
have a way to get getname events, be it via an on-the-fly 'perf probe'
event or after a vfs_getname tracepoint is added to the kernel.
A first step will be to synthesize such event for the use cases where
the threads in the monitored workload exist already.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1r1ti33ye1666jezu2d8q1c3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Printing it as an hex number.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gd68zmnwbbofsv5m6w18intw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the address family and socket type.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3a6cwwskobvan823pau76cm4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In such cases just stating the (arg, name, array) is enough, reducing
the size of the syscall formatters table.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3k53p6dv2sh4ydsc5k5otoia@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the check of the mmap_pages value to the options parsing time, so
we could rely on this value on other parts of code.
Related changes come in the next patches.
Also changes perf_evlist::mmap_len to proper size_t type.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378031796-17892-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we make the output more compact.
If somebody complain (and provide a sane reason why we would like to see
zeroes) we can make it an optional, ~/.perfconfig configurable knob.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-myqozw43hk8z2r5hsupzdk82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Entries in syscall_fmts need to be in alphabetical order, and the
duplicate entry breaks bsearch on new entries around this duplicate
entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378319865-55695-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current timestamp shown for output is time relative to firt sample. This
patch adds an option to show the absolute perf_clock timestamp which is
useful when comparing output across commands (e.g., perf-trace to
perf-script).
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378319865-55695-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On the getrlimit, setrlimit and prlimit64 syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pups75313afhn7p96qwhzs9v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing the _OK suffix and using RWX when all three bits are set, for
instance.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ypaz9k43lyqy94679feqnv8x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Taking into account the fact that the SOCK_ types can be overriden for
ABI reasons on MIPS and also masking and interpreting the socket flags
(NONBLOCK and CLOEXEC), printing whatever is left in the flags bits
as an hex number, or'ed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cbn57082gq9v0sbsd67edwjq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is just for the low hanging fruit 'cmd' arg, a proper beautifier
will as well use arg->mask to ignore the third arg for some of the
cmds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-phhvcyi9vdnxw9l11tbquvru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can have generic formatters that act upon specific
parameters.
Start using them with a simple string table that assumes entries
will be indexes to a string table, like with the 'which' parm
for the set and getitimer syscalls
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r0dqhapr8j6150v1wctgg340@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can add more state to formatters without having to modify
all of them.
Example is to pass a table to a generic string formatter, like for
setitimer 'which' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zyi2esmas5wfrxznh0x0fkiz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
5c5e854b changed perf_event__synthesize_mmap_events to generate MMAP2
events. Since perf-trace does not have a handler for it it dies with a
segfault when trying to process files:
perf trace -i /tmp/perf.data
Segmentation fault
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1379900700-5186-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
builtin-trace.c started using various new syscall features not defined
in the header files of older distros - resulting in build failures.
Fill in the (ABI) constants if they are not defined.
(There might be a better place to put this than builtin-trace.c, into a
compat header or so.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20130912132900.GE23826@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MAP_32BIT is defined only on x86... this means perf fails to build on
all other platforms.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130905142947.GA25882@merlin.infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were checking for it only after processing all events in the buffer,
delaying processing the termination request for long periods.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9jdbu937curvb35cfzbyss4g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
... so that it can mask args relative to its position, like the 'mode' arg
that may or not be printed according to the 'flags' (O_CREAT) value.
[root@zoo ~]# perf trace -a -e openat,open_by_handle_at | head -1
469.754 ( 0.034 ms): 1183 openat(dfd: -100, filename: 0x7fbde40014b0, flags: CLOEXEC|DIRECTORY|NONBLOCK) = 23
[root@zoo ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bgokqpkufd4sio7ixxknf1ux@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That uses the arg mask mechanism just introduced to suppress ignored
arguments according to the futex operation.
Based on an initial patch from David Ahern that showed the need for some
way to allow args to tell how many further args should be shown.
Initial-patch-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0k30it46r4hv5eanefbdmj5t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The futex syscall ignores some arguments according to the 'operation'
arg, so allow arg formatters to mask those.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-abqrg3oldgfsdnltfrvso9f7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed for compile on Fedora 12 which goes back to the 2.6.32 kernel.
Might be needed for RHEL6. I use F12 to compile static binaries for
Wind River Linux 4.3.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-nd0d7rbajgm8k6tah3xv34v1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows capture of raw_syscall events for all processes or threads in a
task and then analyzing specific ones.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377750593-48046-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows capture of raw_syscall:* events and analyzed at a later time.
v2: change -i option from inherit to input name for consistency with
other perf commands
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377750593-48046-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new parameter for 'pid' to machine__findnew_thread().
Change callers to pass 'pid' when it is known.
Note that callers sometimes want to find the main thread
which has the memory maps. The main thread has tid == pid
so the usage in that case is:
machine__findnew_thread(machine, pid, pid)
whereas the usage to find the specific thread is:
machine__findnew_thread(machine, pid, tid)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377591794-30553-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mmap syscalls, for instance, don't have the FORMAT_IS_POINTER for
its pointer arguments, override it.
This also paves the way for more specialized argument beautifiers, like
for mmap's prot and flags arguments.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mm864hvhrpt39muxmmbtjasz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
event_format->flags has a FIELD_IS_POINTER, but it is not set for
the sys_exit 'ret' field in syscalls like mmap, so we need a way to
ask for hex printing for pointer returns and keep things like 'read'
returns printing in decimal.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lfuveegw4od1t08n7bsmonrm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with one for printing pointers in hexadecimal, using the
information in the syscall tracepoint format.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c4y4jy7qqkn8wsd8q6j1g7zh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
