mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 07:35:20 +07:00
cac7643a27
28337 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Masami Hiramatsu
|
6b7dca401c |
tracing: Allow gcov profiling on only ftrace subsystem
Add GCOV_PROFILE_FTRACE to allow gcov profiling on only files in ftrace subsystem. This config option will be used for checking kselftest/ftrace coverage. Link: http://lkml.kernel.org/r/153483647755.32472.4746349899604275441.stgit@devbox Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Linus Torvalds
|
7140ad3898 |
Updates for v4.19:
- Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockde and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3 c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU= =vgEr -----END PGP SIGNATURE----- Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockdep and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. * tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) tracing: Fix SPDX format headers to use C++ style comments tracing: Add SPDX License format tags to tracing files tracing: Add SPDX License format to bpf_trace.c blktrace: Add SPDX License format header s390/ftrace: Add -mfentry and -mnop-mcount support tracing: Add -mcount-nop option support tracing: Avoid calling cc-option -mrecord-mcount for every Makefile tracing: Handle CC_FLAGS_FTRACE more accurately Uprobe: Additional argument arch_uprobe to uprobe_write_opcode() Uprobes: Simplify uprobe_register() body tracepoints: Free early tracepoints after RCU is initialized uprobes: Use synchronize_rcu() not synchronize_sched() tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister() ftrace: Remove unused pointer ftrace_swapper_pid tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing/irqsoff: Handle preempt_count for different configs tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing: irqsoff: Account for additional preempt_disable trace: Use rcu_dereference_raw for hooks from trace-event subsystem tracing/kprobes: Fix within_notrace_func() to check only notrace functions ... |
||
Linus Torvalds
|
3933ec73cd |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina: "Code cleanups from Kamalesh Babulal" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Validate module/old func name length livepatch: Remove reliable stacktrace check in klp_try_switch_task() |
||
Jiri Kosina
|
badf58a272 | Merge branch 'for-4.19/upstream' into for-linus | ||
Gustavo A. R. Silva
|
b639186ffe |
futex: Mark expected switch fall-throughs
In preparation of enabling -Wimplicit-fallthrough, mark switch cases which fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Link: https://lkml.kernel.org/r/20180816172124.GA2407@embeddedor.com |
||
Rafael J. Wysocki
|
7059b36636 |
sched: idle: Avoid retaining the tick when it has been stopped
If the tick has been stopped already, but the governor has not asked to
stop it (which it can do sometimes), the idle loop should invoke
tick_nohz_idle_stop_tick(), to let tick_nohz_stop_tick() take care
of this case properly.
Fixes:
|
||
Linus Torvalds
|
2ad0d52699 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Fix races in IPVS, from Tan Hu. 2) Missing unbind in matchall classifier, from Hangbin Liu. 3) Missing act_ife action release, from Vlad Buslov. 4) Cure lockdep splats in ila, from Cong Wang. 5) veth queue leak on link delete, from Toshiaki Makita. 6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From Kees Cook. 7) RCU usage fixup in XDP, from Tariq Toukan. 8) Two TCP ULP fixes from Daniel Borkmann. 9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner Kallweit. 10) Always take tcf_lock with BH disabled, otherwise we can deadlock with rate estimator code paths. From Vlad Buslov. 11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly. From Jian-Hong Pan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) ip6_vti: fix creating fallback tunnel device for vti6 ip_vti: fix a null pointer deferrence when create vti fallback tunnel r8169: don't use MSI-X on RTL8106e net: lan743x_ptp: convert to ktime_get_clocktai_ts64 net: sched: always disable bh when taking tcf_lock ip6_vti: simplify stats handling in vti6_xmit bpf: fix redirect to map under tail calls r8169: add missing Kconfig dependency tools/bpf: fix bpf selftest test_cgroup_storage failure bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist bpf, sockmap: fix map elem deletion race with smap_stop_sock bpf, sockmap: fix leakage of smap_psock_map_entry tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach tcp, ulp: add alias for all ulp modules bpf: fix a rcu usage warning in bpf_prog_array_copy_core() samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM net/xdp: Fix suspicious RCU usage warning net/mlx5e: Delete unneeded function argument Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb isdn: Disable IIOCDBGVAR ... |
||
David S. Miller
|
6e3bf9b04f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2018-08-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit restrictions, from Yonghong. 2) Fix a suspicious RCU rcu_dereference_check() warning triggered from removing a device's XDP memory allocator by using the correct rhashtable lookup function, from Tariq. 3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races as well as enforcing module aliases for ULPs. Another fix for BPF map redirect to make them work again with tail calls, from Daniel. 4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Ingo Molnar
|
5804b11034 |
perf/core improvements ad fixes:
kernel: . kallsyms, x86: Export addresses of PTI entry trampolines (Alexander Shishkin) . kallsyms: Simplify update_iter_mod() (Adrian Hunter) . x86: Add entry trampolines to kcore (Adrian Hunter) Hardware tracing: . Fix auxtrace queue resize (Adrian Hunter) Arch specific: . Fix uninitialized ARM SPE record error variable (Kim Phillips) . Fix trace event post-processing in powerpc (Sandipan Das) Build: . Fix check-headers.sh AND list path of execution (Alexander Kapshuk) . Remove -mcet and -fcf-protection when building the python binding with older clang versions (Arnaldo Carvalho de Melo) . Make check-headers.sh check based on kernel dir (Jiri Olsa) . Move syscall_64.tbl check into check-headers.sh (Jiri Olsa) Infrastructure: . Check for null when copying nsinfo. (Benno Evers) Libraries: . Rename libtraceevent prefixes, prep work for making it a shared library generaly available (Tzvetomir Stoyanov (VMware)) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlt0OP8ACgkQ1lAW81NS qkD0lg/8Dcjd6bCgHzrRJYcR4VUNgHq4LnpJEp3VVvtV29AmptVW3hOCF6siuwDI H8rtMzE0gflMVHae310qTaUIzo1A6/ugoRwxUKLKU8aWkA1ikl9iJn6uaTttOCIG H4a/mExILDicGfxMk6kAPdyDbYr7r+1UoF58asrWVjPQNPxoJSALJCPtMnLK7Cn8 qMZN68TqIL5zifbRe6UHKCH/SmDuowVmEIz4Nin3QtwKFPH+I02TtSdYkNWTC5WK o469/zy9cceA6a8Q+bVEUP0OD1mU8BvRnZogOiZ5SdMiYZlDkFSqG5MzgTtJUXQC DxOKkANdWu7zON/KywGDX8kcIBySzd5toTiXLvsHNNhxR8pT3bU57QvrscqLIMX+ SVbCR03h5EwLeJopvDKZjwtcSwCWp1aCXCrmLP04tcB1zi+mUIRohbzf2vZDPfwo IRtoHvPAgV9UAA7M+UAAtNc7G0Gg/K2c6LlfiuxDhgjk9Jqg4NbOz3cn6rvXtGQX B4RM9pdhoNi9tqrXNYCnLzinzKtPhWjyEbb0FBlgvXTNQNiDVjhrkt3pC1fH1zK9 GX1F6L78x24z3bZl5hUyYXmxOkktpAeprjICXAikYvwwige6aNENVLhCI/fVFHcx ByxXbFMom/dSIgU0tBfdqktd7ZmSLm94obSuA6BW8/htf2JIztM= =W1go -----END PGP SIGNATURE----- Merge tag 'perf-core-for-mingo-4.19-20180815' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: kernel: - kallsyms, x86: Export addresses of PTI entry trampolines (Alexander Shishkin) - kallsyms: Simplify update_iter_mod() (Adrian Hunter) - x86: Add entry trampolines to kcore (Adrian Hunter) Hardware tracing: - Fix auxtrace queue resize (Adrian Hunter) Arch specific: - Fix uninitialized ARM SPE record error variable (Kim Phillips) - Fix trace event post-processing in powerpc (Sandipan Das) Build: - Fix check-headers.sh AND list path of execution (Alexander Kapshuk) - Remove -mcet and -fcf-protection when building the python binding with older clang versions (Arnaldo Carvalho de Melo) - Make check-headers.sh check based on kernel dir (Jiri Olsa) - Move syscall_64.tbl check into check-headers.sh (Jiri Olsa) Infrastructure: - Check for null when copying nsinfo. (Benno Evers) Libraries: - Rename libtraceevent prefixes, prep work for making it a shared library generaly available (Tzvetomir Stoyanov (VMware)) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Linus Torvalds
|
6ada4e2826 |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton: - a few misc things - a few Y2038 fixes - ntfs fixes - arch/sh tweaks - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) mm/hmm.c: remove unused variables align_start and align_end fs/userfaultfd.c: remove redundant pointer uwq mm, vmacache: hash addresses based on pmd mm/list_lru: introduce list_lru_shrink_walk_irq() mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one() mm/list_lru.c: move locking from __list_lru_walk_one() to its caller mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node() mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP mm/sparse: delete old sparse_init and enable new one mm/sparse: add new sparse_init_nid() and sparse_init() mm/sparse: move buffer init/fini to the common place mm/sparse: use the new sparse buffer functions in non-vmemmap mm/sparse: abstract sparse buffer allocations mm/hugetlb.c: don't zero 1GiB bootmem pages mm, page_alloc: double zone's batchsize mm/oom_kill.c: document oom_lock mm/hugetlb: remove gigantic page support for HIGHMEM mm, oom: remove sleep from under oom_lock kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous() mm/cma: remove unsupported gfp_mask parameter from cma_alloc() ... |
||
Marek Szyprowski
|
d834c5ab83 |
kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function. Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit
|
||
Marek Szyprowski
|
6518202970 |
mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
cma_alloc() doesn't really support gfp flags other than __GFP_NOWARN, so
convert gfp_mask parameter to boolean no_warn parameter.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit
|
||
Andrey Ryabinin
|
0207df4fa1 |
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN
KASAN learns about hotadded memory via the memory hotplug notifier.
devm_memremap_pages() intentionally skips calling memory hotplug
notifiers. So KASAN doesn't know anything about new memory added by
devm_memremap_pages(). This causes a crash when KASAN tries to access
non-existent shadow memory:
BUG: unable to handle kernel paging request at ffffed0078000000
RIP: 0010:check_memory_region+0x82/0x1e0
Call Trace:
memcpy+0x1f/0x50
pmem_do_bvec+0x163/0x720
pmem_make_request+0x305/0xac0
generic_make_request+0x54f/0xcf0
submit_bio+0x9c/0x370
submit_bh_wbc+0x4c7/0x700
block_read_full_page+0x5ef/0x870
do_read_cache_page+0x2b8/0xb30
read_dev_sector+0xbd/0x3f0
read_lba.isra.0+0x277/0x670
efi_partition+0x41a/0x18f0
check_partition+0x30d/0x5e9
rescan_partitions+0x18c/0x840
__blkdev_get+0x859/0x1060
blkdev_get+0x23f/0x810
__device_add_disk+0x9c8/0xde0
pmem_attach_disk+0x9a8/0xf50
nvdimm_bus_probe+0xf3/0x3c0
driver_probe_device+0x493/0xbd0
bus_for_each_drv+0x118/0x1b0
__device_attach+0x1cd/0x2b0
bus_probe_device+0x1ac/0x260
device_add+0x90d/0x1380
nd_async_device_register+0xe/0x50
async_run_entry_fn+0xc3/0x5d0
process_one_work+0xa0a/0x1810
worker_thread+0x87/0xe80
kthread+0x2d7/0x390
ret_from_fork+0x3a/0x50
Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init()
interface to map/unmap kasan_zero_page at requested virtual addresses.
And use it to add/remove the shadow memory for hotplugged/unplugged
device memory.
Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com
Fixes:
|
||
Shakeel Butt
|
d46eb14b73 |
fs: fsnotify: account fsnotify metadata to kmemcg
Patch series "Directed kmem charging", v8. The Linux kernel's memory cgroup allows limiting the memory usage of the jobs running on the system to provide isolation between the jobs. All the kernel memory allocated in the context of the job and marked with __GFP_ACCOUNT will also be included in the memory usage and be limited by the job's limit. The kernel memory can only be charged to the memcg of the process in whose context kernel memory was allocated. However there are cases where the allocated kernel memory should be charged to the memcg different from the current processes's memcg. This patch series contains two such concrete use-cases i.e. fsnotify and buffer_head. The fsnotify event objects can consume a lot of system memory for large or unlimited queues if there is either no or slow listener. The events are allocated in the context of the event producer. However they should be charged to the event consumer. Similarly the buffer_head objects can be allocated in a memcg different from the memcg of the page for which buffer_head objects are being allocated. To solve this issue, this patch series introduces mechanism to charge kernel memory to a given memcg. In case of fsnotify events, the memcg of the consumer can be used for charging and for buffer_head, the memcg of the page can be charged. For directed charging, the caller can use the scope API memalloc_[un]use_memcg() to specify the memcg to charge for all the __GFP_ACCOUNT allocations within the scope. This patch (of 2): A lot of memory can be consumed by the events generated for the huge or unlimited queues if there is either no or slow listener. This can cause system level memory pressure or OOMs. So, it's better to account the fsnotify kmem caches to the memcg of the listener. However the listener can be in a different memcg than the memcg of the producer and these allocations happen in the context of the event producer. This patch introduces remote memcg charging API which the producer can use to charge the allocations to the memcg of the listener. There are seven fsnotify kmem caches and among them allocations from dnotify_struct_cache, dnotify_mark_cache, fanotify_mark_cache and inotify_inode_mark_cachep happens in the context of syscall from the listener. So, SLAB_ACCOUNT is enough for these caches. The objects from fsnotify_mark_connector_cachep are not accounted as they are small compared to the notification mark or events and it is unclear whom to account connector to since it is shared by all events attached to the inode. The allocations from the event caches happen in the context of the event producer. For such caches we will need to remote charge the allocations to the listener's memcg. Thus we save the memcg reference in the fsnotify_group structure of the listener. This patch has also moved the members of fsnotify_group to keep the size same, at least for 64 bit build, even with additional member by filling the holes. [shakeelb@google.com: use GFP_KERNEL_ACCOUNT rather than open-coding it] Link: http://lkml.kernel.org/r/20180702215439.211597-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Daniel Borkmann
|
f6069b9aa9 |
bpf: fix redirect to map under tail calls
Commits |
||
Linus Torvalds
|
d190775206 |
Modules updates for v4.19
Summary of modules changes for the 4.19 merge window: - Fix modules kallsyms for livepatch. Livepatch modules can have SHN_UNDEF symbols in their module symbol tables for later symbol resolution, but kallsyms shouldn't be returning these symbols - Some code cleanups and minor reshuffling in load_module() were done to log the module name when module signature verification fails Signed-off-by: Jessica Yu <jeyu@kernel.org> -----BEGIN PGP SIGNATURE----- iQIcBAABCgAGBQJbdmqCAAoJEMBFfjjOO8FyR+AP/3nbWaCUYmxvae9QPt1ycXxm UV0TnRYJbrEZVlUpL1X/efd63jVizmhJSMPTGumje4s3nhSNGMbEYa+/VN0mcja3 egKqKGD/zjUrOZxwu/zxlV4lVd6Wt8mbO+pFnc/0MlmtWVnkWxRXsf/k8Uo5bzSE l6aGjQJjF1Yj5hwgVoLlL0L+6mw5Usu1tKzvEvx5IZO9IvzenwifZ1N8JowSp7G2 APd0TjxDTuZlR430JVONKVpzFCWtMqUzMxHQZl26uKxyrLkJ32GarQKTUxStOAXg LTZ1Nrjn4UToRZLx4VUmeaXBlW/dhnzF17WPwrN1AXFgcXdR6wlw0otDSJdZVh8X FM8mCANZt9Zi/HAmBTMypnnCGqyoY+rHz1TWcsNDgknwBb0lg+3Kx781fl1Z1v0g RHV8JYRw7hCt/WDfPuyrhDO5wmdqAPF3A1WlJ7ItNvLB4tP0jILCoOP5csSp8+hs q/7o1A66KoGgOCWJ4NnZ/uPadr1ahTH0CYcq4dziQWiEuzOU3XdgHJ2V+XBgs36v UkuJiqM9NyBs90+r9+8YBCkC9gCv8Rs/43aTN9sVoDoihmX57339jgVcKfLIqSNw djmJHsUW7eFU0I6m5c8bNt3VDgL4iIJp4gAwu/uuDV7nFnbaJQK9cENH8IJ23Wto y0CYhBExs26z6axi4BCv =HzLj -----END PGP SIGNATURE----- Merge tag 'modules-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Summary of modules changes for the 4.19 merge window: - Fix modules kallsyms for livepatch. Livepatch modules can have SHN_UNDEF symbols in their module symbol tables for later symbol resolution, but kallsyms shouldn't be returning these symbols - Some code cleanups and minor reshuffling in load_module() were done to log the module name when module signature verification fails" * tag 'modules-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: kernel/module: Use kmemdup to replace kmalloc+memcpy ARM: module: fix modsign build error modsign: log module name in the event of an error module: replace VMLINUX_SYMBOL_STR() with __stringify() or string literal module: print sensible error code module: setup load info before module_sig_check() module: make it clear when we're handling the module copy in info->hdr module: exclude SHN_UNDEF symbols from kallsyms api |
||
Linus Torvalds
|
2645b9d1a4 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlt2mBQACgkQnJ2qBz9k QNntGQgAluTTnuJLjoUDjFfT37Fjf2x1ve8rg6xmYS3YIhYTWWA1oazUIeyBDfwa soutlfAZ/ix2bP1UEmeULxFhrCIXYBbWAe8s5MRqO/7s01QftNf0M72ASmd7gZRy rSVt2/BWpr745mWI38tEKlIF4sQJVD7IGrnc1cQslPzleeCqsCXA+uBkBPMlcDpJ ZWni2qK023y9E2dsg6RsJc1HemkQvrJtoLSVqRsdhty9GEuWseMbssdgz1zMXljQ eXIALE5BssoxISIpH6qVKZRlr7UWGxOmV4CDPmku7DFLOSiwMk/Ml0V80BwzjNNY hY8qfxcJOFOGZ8t82pWkVGMjgOAKjA== =IN6Y -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "fsnotify cleanups from Amir and a small inotify improvement" * tag 'fsnotify_for_v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: inotify: Add flag IN_MASK_CREATE for inotify_add_watch() fanotify: factor out helpers to add/remove mark fsnotify: add helper to get mask from connector fsnotify: let connector point to an abstract object fsnotify: pass connp and object type to fsnotify_add_mark() fsnotify: use typedef fsnotify_connp_t for brevity |
||
Steven Rostedt (VMware)
|
bb730b5833 |
tracing: Fix SPDX format headers to use C++ style comments
The Linux kernel adopted the SPDX License format headers to ease license compliance management, and uses the C++ '//' style comments for the SPDX header tags. Some files in the tracing directory used the C style /* */ comments for them. To be consistent across all files, replace the /* */ C style SPDX tags with the C++ // SPDX tags. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Steven Rostedt (VMware)
|
bcea3f96e1 |
tracing: Add SPDX License format tags to tracing files
Add the SPDX License header to ease license compliance management. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Steven Rostedt (VMware)
|
179a0cc4e0 |
tracing: Add SPDX License format to bpf_trace.c
Add the SPDX License header to ease license compliance management. Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Daniel Borkmann
|
585f5a6252 |
bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
The current code in sock_map_ctx_update_elem() allows for BPF_EXIST
and BPF_NOEXIST map update flags. While on array-like maps this approach
is rather uncommon, e.g. bpf_fd_array_map_update_elem() and others
enforce map update flags to be BPF_ANY such that xchg() can be used
directly, the current implementation in sock map does not guarantee
that such operation with BPF_EXIST / BPF_NOEXIST is atomic.
The initial test does a READ_ONCE(stab->sock_map[i]) to fetch the
socket from the slot which is then tested for NULL / non-NULL. However
later after __sock_map_ctx_update_elem(), the actual update is done
through osock = xchg(&stab->sock_map[i], sock). Problem is that in
the meantime a different CPU could have updated / deleted a socket
on that specific slot and thus flag contraints won't hold anymore.
I've been thinking whether best would be to just break UAPI and do
an enforcement of BPF_ANY to check if someone actually complains,
however trouble is that already in BPF kselftest we use BPF_NOEXIST
for the map update, and therefore it might have been copied into
applications already. The fix to keep the current behavior intact
would be to add a map lock similar to the sock hash bucket lock only
for covering the whole map.
Fixes:
|
||
Daniel Borkmann
|
166ab6f0a0 |
bpf, sockmap: fix map elem deletion race with smap_stop_sock
The smap_start_sock() and smap_stop_sock() are each protected under the sock->sk_callback_lock from their call-sites except in the case of sock_map_delete_elem() where we drop the old socket from the map slot. This is racy because the same sock could be part of multiple sock maps, so we run smap_stop_sock() in parallel, and given at that point psock->strp_enabled might be true on both CPUs, we might for example wrongly restore the sk->sk_data_ready / sk->sk_write_space. Therefore, hold the sock->sk_callback_lock as well on delete. Looks like |
||
Daniel Borkmann
|
d40b0116c9 |
bpf, sockmap: fix leakage of smap_psock_map_entry
While working on sockmap I noticed that we do not always kfree the struct smap_psock_map_entry list elements which track psocks attached to maps. In the case of sock_hash_ctx_update_elem(), these map entries are allocated outside of __sock_map_ctx_update_elem() with their linkage to the socket hash table filled. In the case of sock array, the map entries are allocated inside of __sock_map_ctx_update_elem() and added with their linkage to the psock->maps. Both additions are under psock->maps_lock each. Now, we drop these elements from their psock->maps list in a few occasions: i) in sock array via smap_list_map_remove() when an entry is either deleted from the map from user space, or updated via user space or BPF program where we drop the old socket at that map slot, or the sock array is freed via sock_map_free() and drops all its elements; ii) for sock hash via smap_list_hash_remove() in exactly the same occasions as just described for sock array; iii) in the bpf_tcp_close() where we remove the elements from the list via psock_map_pop() and iterate over them dropping themselves from either sock array or sock hash; and last but not least iv) once again in smap_gc_work() which is a callback for deferring the work once the psock refcount hit zero and thus the socket is being destroyed. Problem is that the only case where we kfree() the list entry is in case iv), which at that point should have an empty list in normal cases. So in cases from i) to iii) we unlink the elements without freeing where they go out of reach from us. Hence fix is to properly kfree() them as well to stop the leakage. Given these are all handled under psock->maps_lock there is no need for deferred RCU freeing. I later also ran with kmemleak detector and it confirmed the finding as well where in the state before the fix the object goes unreferenced while after the patch no kmemleak report related to BPF showed up. [...] unreferenced object 0xffff880378eadae0 (size 64): comm "test_sockmap", pid 2225, jiffies 4294720701 (age 43.504s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 50 4d 75 5d 03 88 ff ff 00 00 00 00 00 00 00 00 PMu]............ backtrace: [<000000005225ac3c>] sock_map_ctx_update_elem.isra.21+0xd8/0x210 [<0000000045dd6d3c>] bpf_sock_map_update+0x29/0x60 [<00000000877723aa>] ___bpf_prog_run+0x1e1f/0x4960 [<000000002ef89e83>] 0xffffffffffffffff unreferenced object 0xffff880378ead240 (size 64): comm "test_sockmap", pid 2225, jiffies 4294720701 (age 43.504s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 00 44 75 5d 03 88 ff ff 00 00 00 00 00 00 00 00 .Du]............ backtrace: [<000000005225ac3c>] sock_map_ctx_update_elem.isra.21+0xd8/0x210 [<0000000030e37a3a>] sock_map_update_elem+0x125/0x240 [<000000002e5ce36e>] map_update_elem+0x4eb/0x7b0 [<00000000db453cc9>] __x64_sys_bpf+0x1f9/0x360 [<0000000000763660>] do_syscall_64+0x9a/0x300 [<00000000422a2bb2>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000002ef89e83>] 0xffffffffffffffff [...] Fixes: |
||
Steven Rostedt (VMware)
|
757d914007 |
tracing/blktrace: Fix to allow setting same value
Masami Hiramatsu reported:
Current trace-enable attribute in sysfs returns an error
if user writes the same setting value as current one,
e.g.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
bash: echo: write error: Invalid argument
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
bash: echo: write error: Device or resource busy
But this is not a preferred behavior, it should ignore
if new setting is same as current one. This fixes the
problem as below.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes:
|
||
Yonghong Song
|
965931e3a8 |
bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
Commit |
||
Steven Rostedt (VMware)
|
91c1e6ba39 |
blktrace: Add SPDX License format header
Add the SPDX License header to ease license compliance management. Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Vasily Gorbik
|
2f4df0017b |
tracing: Add -mcount-nop option support
-mcount-nop gcc option generates the calls to the profiling functions as nops which allows to avoid patching mcount jump with NOP instructions initially. -mcount-nop gcc option will be activated if platform selects HAVE_NOP_MCOUNT and gcc actually supports it. In addition to that CC_USING_NOP_MCOUNT is defined and could be used by architectures to adapt ftrace patching behavior. Link: http://lkml.kernel.org/r/patch-3.thread-aa7b8d.git-e02ed2dc082b.your-ad-here.call-01533557518-ext-9465@work.hours Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Linus Torvalds
|
54dbe75bbf |
drm pull for 4.19-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJbc41pAAoJEAx081l5xIa+ZrAP/AzKj4i4pBLVJcvNZ2BwD+UD ZNSNj2iqCJ5+Jo/WtIwQ8tLct9UqfVssUwBke6tZksiLdTigGPTUyVIAdK+9kyWD D00m3x/pToJrSF2D0FwxQlPUtPkohp9N+E6+TU7gd1oCasZfBzmcEpoVAmZf+NWE kN1xXpmGxZWpu0wc7JA2lv9MuUTijCwIqJqa5E0bB3z06G5mw+PJ89kYzMx19OyA ZYQK8y3A40ZGl8UbajZ4xg9pqFCRYFFHGqfYlpUWWTh0XMAXu8+Yqzh3dJxmak7r 4u2pdQBsxPMZO8qKBHpVvI7Zhoe0Ntnolc0XVD+2IbqqnTprVbQs0bWf3YyfUlQi 1/9bWFK67W0LEuzac6M7a7EQqFNiHF13Btao7aqENTIe/GaCZJoopaiRMAmh6EHD 4PezeYqrW8cSaPj6OKouL1BhW9Bjixsg0bvjS/uB6m4KekFCt1++BDFGzkqvm6Mo SVW7nkJoCFpCASaR7DhUEOPexaHeJ65HCDDUvYdqz9jd2w1TgvvanEZWual1NwEm ImA8A4wGZ/3KijpyyKm0gE96RX7+zMMZ3brW6p1vhUUKVYJCrvSr5jrXH5+2k6Aw Y455doGL87IRkwyje/YbQF0I8pbUZD9QS5wII13tLGwOH9/uC/Xl6dHNM40gtqyh W4gEdY+NAMJmYLvRNawa =g9rD -----END PGP SIGNATURE----- Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ... |
||
Linus Torvalds
|
9a76aba02a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ... |
||
Linus Torvalds
|
fa1b5d09d0 |
Consolidation of Kconfig files by Christoph Hellwig.
Move the source statements of arch-independent Kconfig files instead of duplicating the includes in every arch/$(SRCARCH)/Kconfig. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJbdFsfAAoJED2LAQed4NsGxHsP/1tmA57OOOj8oGxO2OXhXVbr Q0MZqCoV4bqMvK/hgCQdl9f+tp0m+j12x4xDLdVf4OqnTXMbqvPDu3uQVKvaj/k1 gHhsFA1tFgSbuJ8InltUsrPEQqbceeJsj50xHVAKijqI6LYeRPPSU7aE9obn+OzH n2nd5sLKvMI/dqdJvW6i5KPydqTH3r3iA7D+ne/XQj0s0EMXvXUPmDT1+ijTnM4a yfm6W5p7L/c3Ugf1Pz5PfnPl4BxBwZMfW5ie/UO8j5C6Rl0iPaOGuuHurocaaJb3 MefR/7NEAR3G8MhJyL2+70jbbwhjpqR2b5ooz1vpuulPHxjeU45BY60XIBWq1afR ewsc12MMCYB695ieYWoHdaWgxD/jhffyRuajfpkXKIZEMgDxS03sMhdULXENVMx1 M0ZQ01g/NLWt9ti9DY3eTKB3ymOhnBa1sa77nGGUHkITq4DQKwPX1J9FP/HT6RNt uOvzeH5kGzc7tqOlZAO0kHbwhQG1uqGcd78IYd4lgf/XfkSgDERTWjnJmnQbwr9m 3PFuST2u8eyO+8Lh1MK76TXOEkXsHMdFugPmb6SlgtMEPKGVLDPlsj52o/LFtgzl eygfMiBFr2+ttkZ6IpNcpmQ4IztmDpz6XoMk3PqDAfUTUSYpCnq1gAEuff/eisCM Odva1ZZaeQ7WpxhsP8rr =gsQJ -----END PGP SIGNATURE----- Merge tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig consolidation from Masahiro Yamada: "Consolidation of Kconfig files by Christoph Hellwig. Move the source statements of arch-independent Kconfig files instead of duplicating the includes in every arch/$(SRCARCH)/Kconfig" * tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: add a Memory Management options" menu kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt kconfig: use a menu in arch/Kconfig to reduce clutter kconfig: include kernel/Kconfig.preempt from init/Kconfig Kconfig: consolidate the "Kernel hacking" menu kconfig: include common Kconfig files from top-level Kconfig kconfig: remove duplicate SWAP symbol defintions um: create a proper drivers Kconfig um: cleanup Kconfig files um: stop abusing KBUILD_KCONFIG |
||
Linus Torvalds
|
e026bcc561 |
Kbuild updates for v4.19
- verify depmod is installed before modules_install - support build salt in case build ids must be unique between builds - allow users to specify additional host compiler flags via HOST*FLAGS, and rename internal variables to KBUILD_HOST*FLAGS - update buildtar script to drop vax support, add arm64 support - update builddeb script for better debarch support - document the pit-fall of if_changed usage - fix parallel build of UML with O= option - make 'samples' target depend on headers_install to fix build errors - remove deprecated host-progs variable - add a new coccinelle script for refcount_t vs atomic_t check - improve double-test coccinelle script - misc cleanups and fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJbdFZ0AAoJED2LAQed4NsGcHYP/23txxk3GRP7O4UkfPw9Rtky MHiXTgcoy2vbG+l12BgzWX+qFii8XTUe3dQtK4HnGQFUIBtEBV/hpZPJtxfgGSev Zou5cv1kr5rNzTkCn//TG3O6/WIkTBCe2hahDCtmGDI3kd/cPK4dHbU/q6KpaqIJ qzZYBXIvCeu2GM8idQoCRrwdMpgu1pBz1gz2sDje1yHH2toI7T6cXHRLQDgx+HPq LIP7W9GUsoDdXjecvPD51LiW89E6BUxETBh5Ft9r9uzwB5ylQQMcw6Qyu2DiYDUX PPsHCMiolYV+Ttcy+vj/67KOvKmEaFotssck+RD/xDCF17zKhRkup+YM8kPLHTVZ TcAUZadbnT6U/s2W6GFwvVbN/P7cc3aif+aNCC/Pl23yagp3pydlSCocYxQgiVR7 /rx48haYDEgu/MJ1X0dOpSO0ErY7zu2OoAlNerW+D9QizwbP+WtZO/CJH8SxQRuN dQ1xmyNrie+ODgi9tbc4eBrsb+1rioX927TP5MbJcfXt5CTsxDmIqop5XwyYIoQN ZWWlzC8Ii3P2trAVpBgM2IEbngSxwr6T9Wbf1ScJnPKr/o1rq+pBk49cYstTz3kQ OwJ8gPwUrkW4R+hlD7L6mL/WcrKzZBQS0Ij1QW2kVSEhRrsKo99psE1/rGehnHu9 KGB0LYYCqGSOHR4zOjg0 =VjfG -----END PGP SIGNATURE----- Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - verify depmod is installed before modules_install - support build salt in case build ids must be unique between builds - allow users to specify additional host compiler flags via HOST*FLAGS, and rename internal variables to KBUILD_HOST*FLAGS - update buildtar script to drop vax support, add arm64 support - update builddeb script for better debarch support - document the pit-fall of if_changed usage - fix parallel build of UML with O= option - make 'samples' target depend on headers_install to fix build errors - remove deprecated host-progs variable - add a new coccinelle script for refcount_t vs atomic_t check - improve double-test coccinelle script - misc cleanups and fixes * tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) coccicheck: return proper error code on fail Coccinelle: doubletest: reduce side effect false positives kbuild: remove deprecated host-progs variable kbuild: make samples really depend on headers_install um: clean up archheaders recipe kbuild: add %asm-generic to no-dot-config-targets um: fix parallel building with O= option scripts: Add Python 3 support to tracing/draw_functrace.py builddeb: Add automatic support for sh{3,4}{,eb} architectures builddeb: Add automatic support for riscv* architectures builddeb: Add automatic support for m68k architecture builddeb: Add automatic support for or1k architecture builddeb: Add automatic support for sparc64 architecture builddeb: Add automatic support for mips{,64}r6{,el} architectures builddeb: Add automatic support for mips64el architecture builddeb: Add automatic support for ppc64 and powerpcspe architectures builddeb: Introduce functions to simplify kconfig tests in set_debarch builddeb: Drop check for 32-bit s390 builddeb: Change architecture detection fallback to use dpkg-architecture builddeb: Skip architecture detection when KBUILD_DEBARCH is set ... |
||
Linus Torvalds
|
b125d90388 |
Printk changes for 4.19
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJbct5hAAoJEFKgDEdIgJTysFoP/jRoozkNpUr4fqcbN+1GCSjY /vaWMJ6cQBHm9b5AE+EYwomTqx5gkaaAw8oR3tnHvBa2NGsE4xzO2LUyuH95FgMo cE74MGS492xeCskEBHk0pbrdD+DOuIIqWlQcDP0mH0OhlBiuW/+j72HhDfOU5yTv uE/X+SyxnYgWW9rKGrkmHqVwJPiEgjtr1tsfsewWVF4MNndCAFYeOgpFZBfhBdnq g57IRjTHLnkAClFrOzUpGIZ/tvN6iyENug860EORYFzSO2SVZ3Jm7v8AcXLQ6lj0 LKmBAoFWeJ95rqJS+rBq3s0hWQLtbVJgQyz2ujN5+a+oZ/+brtQmTHjD9Nri0cSf cKUmSfMX4tqdMcGjc7B2RqAtdthst2kYy6RXlp4BzYcdoxDr4U45VTqS8gZQuPSt cdLUgoUEEX7nt1zlQER6GDzWc3FVKDXSHbDM+4OykFF3k1JCgoDq0kemAmsZw2A6 2QGs7RqBKYidR7DB+beZj2YV0ihRkykwb5c+NUASJV5mIB8TjjmOEw52Q0Fc9Hl1 WbA0wm/+pNG7ur9hF0VZ7zy9Rfxgx2Ec5ekWGTgt8xog3B1Dsqix5RpGRDX/f1u8 /dJxHD70pzADwdXXF5hrdCRtCXsTd/27SnWREYhMhfqwu/awc3boOKonOITCYmvv 7eiffcIaUbfiKsIhgrf+ =TTFG -----END PGP SIGNATURE----- Merge tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Different vendors have a different expectation about a console quietness. Make it configurable to reduce bike-shedding about the upstream default - Decide about the message visibility when the message is stored. It avoids races caused by a delayed console handling - Always store printk() messages into the per-CPU buffers again in NMI. The only exception is when flushing trace log in panic(). There the risk of loosing messages is worth an eventual reordering - Handle invalid %pO printf modifiers correctly - Better handle %p printf modifier tests before crng is initialized - Some clean up * tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Do not handle %pO[^F] as %px printk: Fix warning about unused suppress_message_printing printk/nmi: Prevent deadlock when accessing the main log buffer in NMI printk: Create helper function to queue deferred console handling printk: Split the code for storing a message into the log buffer printk: Clean up syslog_print_all() printk: Remove unnecessary kmalloc() from syslog during clear printk: Make CONSOLE_LOGLEVEL_QUIET configurable printk: make sure to print log on console. lib/test_printf.c: accept "ptrval" as valid result for plain 'p' tests |
||
Linus Torvalds
|
8c32685030 |
audit/stable-4.18 PR 20180814
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEcQCq365ubpQNLgrWVeRaWujKfIoFAltzOI8UHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQVeRaWujKfIqvOw/9F48G0G87ETN2M1O3fFLpANd2GtPH cYtg6SG8b3nZzkllUBOVZjoj7y0OyTgi+ksm5XSmgcR4npELDHWRhXaCma1s8Hxw Zpk2SWrEmwdudec9zZ8sBtvd6t63P9TkVSk3S4z+1HgH6uzPg6lMes4w/cQIdn0e uEIiuNkOOHXxWLxgphxPJ/XffQCfV6ltm9j41Z2S6RZHe/0UsJSKCwD+LwW+jLe3 0e9oUPWVnxZlhpJoctWpgtaYmG8rtqxfXruFwg2mR5d2VBs966h3FCz9b9qhtA+R HPy/KagJuUFRL+6ZlpX1dtkkNi07LKjsx3OJYBNHNKmYDA5yJF3X/mMV4uMkroFz q8k88Wi1dYWKJvLhAGALRGSbiYljLgDFJH31tN2FWHb93+l3CXLhjmwIyUxrtiW1 DfUJYM8/ZzMjghpb6YoHi1Dq+Z1cG07S1Eo0pTmtxVT2g43eXSL4OvxFhJKkCFv9 n1J/fo6JVw9i+4DqWkk+8NFGXYYZFlfrGl14szTp+8Q9Gw6OlWWcnF/o3+KCtPez 5z5+E64pAHhLa9/gaHu62eK4lIpiXv3IE8fA7OvFxrUpSJbtYc0RnGv8eKhO8J6v Q9TQKJGbbOLwP+mF/8sPexsREDaU3fB68dTj/FF5AHLH8KFUgAQYcm0bIzpNDBSd w+REW+TTiht8W6E= =tnPz -----END PGP SIGNATURE----- Merge tag 'audit-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit patches from Paul Moore: "Twelve audit patches for v4.19 and they run the full gamut from fixes to features. Notable changes include the ability to use the "exe" audit filter field in a wider variety of filter types, a fix for our comparison of GID/EGID in audit filter rules, better association of related audit records (connecting related audit records together into one audit event), and a fix for a potential use-after-free in audit_add_watch(). All the patches pass the audit-testsuite and merge cleanly on your current master branch" * tag 'audit-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix use-after-free in audit_add_watch audit: use ktime_get_coarse_real_ts64() for timestamps audit: use ktime_get_coarse_ts64() for time access audit: simplify audit_enabled check in audit_watch_log_rule_change() audit: check audit_enabled in audit_tree_log_remove_rule() cred: conditionally declare groups-related functions audit: eliminate audit_enabled magic number comparison audit: rename FILTER_TYPE to FILTER_EXCLUDE audit: Fix extended comparison of GID/EGID audit: tie ANOM_ABEND records to syscall audit: tie SECCOMP records to syscall audit: allow other filter list types for AUDIT_EXE |
||
Linus Torvalds
|
92d4a03674 |
Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris: - kstrdup() return value fix from Eric Biggers - Add new security_load_data hook to differentiate security checking of kernel-loaded binaries in the case of there being no associated file descriptor, from Mimi Zohar. - Add ability to IMA to specify a policy at build-time, rather than just via command line params or by loading a custom policy, from Mimi. - Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if using signed firmware), from Mimi. - Allow IMA to deny loading of kexec kernel images, as they cannot be measured by IMA, from Mimi. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: check for kstrdup() failure in lsm_append() security: export security_kernel_load_data function ima: based on policy warn about loading firmware (pre-allocated buffer) module: replace the existing LSM hook in init_module ima: add build time policy ima: based on policy require signed firmware (sysfs fallback) firmware: add call to LSM hook before firmware sysfs fallback ima: based on policy require signed kexec kernel images kexec: add call to LSM hook in original kexec_load syscall security: define new LSM hook named security_kernel_load_data MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry |
||
Linus Torvalds
|
1202f4fdbc |
arm64 updates for 4.19
A bunch of good stuff in here: - Wire up support for qspinlock, replacing our trusty ticket lock code - Add an IPI to flush_icache_range() to ensure that stale instructions fetched into the pipeline are discarded along with the I-cache lines - Support for the GCC "stackleak" plugin - Support for restartable sequences, plus an arm64 port for the selftest - Kexec/kdump support on systems booting with ACPI - Rewrite of our syscall entry code in C, which allows us to zero the GPRs on entry from userspace - Support for chained PMU counters, allowing 64-bit event counters to be constructed on current CPUs - Ensure scheduler topology information is kept up-to-date with CPU hotplug events - Re-enable support for huge vmalloc/IO mappings now that the core code has the correct hooks to use break-before-make sequences - Miscellaneous, non-critical fixes and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCgAGBQJbbV41AAoJELescNyEwWM0WoEIALhrKtsIn6vqFlSs/w6aDuJL cMWmFxjTaKLmIq2+cJIdFLOJ3CH80Pu9gB+nEv/k+cZdCTfUVKfRf28HTpmYWsht bb4AhdHMC7yFW752BHk+mzJspeC8h/2Rm8wMuNVplZ3MkPrwo3vsiuJTofLhVL/y BihlU3+5sfBvCYIsWnuEZIev+/I/s/qm1ASiqIcKSrFRZP6VTt5f9TC75vFI8seW 7yc3odKb0CArexB8yBjiPNziehctQF42doxQyL45hezLfWw4qdgHOSiwyiOMxEz9 Fwwpp8Tx33SKLNJgqoqYznGW9PhYJ7n2Kslv19uchJrEV+mds82vdDNaWRULld4= =kQn6 -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "A bunch of good stuff in here. Worth noting is that we've pulled in the x86/mm branch from -tip so that we can make use of the core ioremap changes which allow us to put down huge mappings in the vmalloc area without screwing up the TLB. Much of the positive diffstat is because of the rseq selftest for arm64. Summary: - Wire up support for qspinlock, replacing our trusty ticket lock code - Add an IPI to flush_icache_range() to ensure that stale instructions fetched into the pipeline are discarded along with the I-cache lines - Support for the GCC "stackleak" plugin - Support for restartable sequences, plus an arm64 port for the selftest - Kexec/kdump support on systems booting with ACPI - Rewrite of our syscall entry code in C, which allows us to zero the GPRs on entry from userspace - Support for chained PMU counters, allowing 64-bit event counters to be constructed on current CPUs - Ensure scheduler topology information is kept up-to-date with CPU hotplug events - Re-enable support for huge vmalloc/IO mappings now that the core code has the correct hooks to use break-before-make sequences - Miscellaneous, non-critical fixes and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits) arm64: alternative: Use true and false for boolean values arm64: kexec: Add comment to explain use of __flush_icache_range() arm64: sdei: Mark sdei stack helper functions as static arm64, kaslr: export offset in VMCOREINFO ELF notes arm64: perf: Add cap_user_time aarch64 efi/libstub: Only disable stackleak plugin for arm64 arm64: drop unused kernel_neon_begin_partial() macro arm64: kexec: machine_kexec should call __flush_icache_range arm64: svc: Ensure hardirq tracing is updated before return arm64: mm: Export __sync_icache_dcache() for xen-privcmd drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory arm64: Add support for STACKLEAK gcc plugin arm64: Add stack information to on_accessible_stack drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported arm64: fix ACPI dependencies rseq/selftests: Add support for arm64 arm64: acpi: fix alignment fault in accessing ACPI efi/arm: map UEFI memory map even w/o runtime services enabled efi/arm: preserve early mapping of UEFI memory map longer for BGRT drivers: acpi: add dependency of EFI for arm64 ... |
||
Alexander Shishkin
|
d83212d5dd |
kallsyms, x86: Export addresses of PTI entry trampolines
Currently, the addresses of PTI entry trampolines are not exported to user space. Kernel profiling tools need these addresses to identify the kernel code, so add a symbol and address for each CPU's PTI entry trampoline. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1528289651-4113-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
b966794220 |
kallsyms: Simplify update_iter_mod()
The logic in update_iter_mod() is overcomplicated and gets worse every time another get_ksymbol_* function is added. In preparation for adding another get_ksymbol_* function, simplify logic in update_iter_mod(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: (ftrace changes only) Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1528289651-4113-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
zhangyi (F)
|
3df6f61fff |
PM / sleep: wakeup: Fix build error caused by missing SRCU support
Commit |
||
Abel Vesa
|
269777aa53 |
cpu/hotplug: Non-SMP machines do not make use of booted_once
Commit |
||
Linus Torvalds
|
e6ecec342f |
This was a moderately busy cycle for docs, with the usual collection of
small fixes and updates. We also have new ktime_get_*() docs from Arnd, some kernel-doc fixes, a new set of Italian translations (non so se vale la pena, ma non fa male - speriamo bene), and some extensive early memory-management documentation improvements from Mike Rapoport. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJbcZVtAAoJEI3ONVYwIuV64ekP/jgTlMi/fErRu6zlsrsWgiIK ir8ueCQ1OSiwOA+N2fUb+2+zlLlfTLgQ+o5IwmZk6rizG87fQ3Rp6i+bvYAZWITh YUuls3VhtRlJZqG1EW7gww1Q2IhRO6GhcpsIamAvhrSLFPaCKiN3JomJi/X47Pfj Ibl24HsruI2fDM1JwWRwCtE5J6vCL9lH1/5v4zVv7xdrVgTrwkZ/hAsE7HBNNat5 dSku2u9HSAXa4KR4sLWrVJ8UI5+fylwilz/57HhCeduQDwKCHE/mfhxLdqL4Oa4q oHTCNq2zTUj4w7GTvHS1g0P3y/iWMYjAzH2is+BokilpIC65NwwsKx2ybZd3Srdh zwP/kYk5U+mYSgdDlyNqwPCibw8KDXB3srKMzyQSN6tkosKCOHFSXF0Js0eupi7t NqmGigl3Qozj1uvU6Wy7vh58u+GFeuO4PF566t2m70Jp0cWzuVKLrBvgNO1X37rB aEBrpOYB/H54t/qf79IFW//pptWXFNZ3S9AgyDVIcmX5C2ihaCoaPNRTom+KbH/D QEoH9rwWSoCi2DGoR83D+G8thCUfB4yfEGulSSIA4pUR7qvIR5rd1ZioI/qtgAHm l7MjTbLpPwiMnpFkBrxxxlFFb4gbETakMBGYoYee8ww5WbQLu0qA93AbwIXyjhE8 mqCOLyBdCAZ0mNxqPSsc =x/P0 -----END PGP SIGNATURE----- Merge tag 'docs-4.19' of git://git.lwn.net/linux Pull documentation update from Jonathan Corbet: "This was a moderately busy cycle for docs, with the usual collection of small fixes and updates. We also have new ktime_get_*() docs from Arnd, some kernel-doc fixes, a new set of Italian translations (non so se vale la pena, ma non fa male - speriamo bene), and some extensive early memory-management documentation improvements from Mike Rapoport" * tag 'docs-4.19' of git://git.lwn.net/linux: (52 commits) Documentation: corrections to console/console.txt Documentation: add ioctl number entry for v4l2-subdev.h Remove gendered language from management style documentation scripts/kernel-doc: Escape all literal braces in regexes docs/mm: add description of boot time memory management docs/mm: memblock: add overview documentation docs/mm: memblock: add kernel-doc description for memblock types docs/mm: memblock: add kernel-doc comments for memblock_add[_node] docs/mm: memblock: update kernel-doc comments mm/memblock: add a name for memblock flags enumeration docs/mm: bootmem: add overview documentation docs/mm: bootmem: add kernel-doc description of 'struct bootmem_data' docs/mm: bootmem: fix kernel-doc warnings docs/mm: nobootmem: fixup kernel-doc comments mm/bootmem: drop duplicated kernel-doc comments Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description. doc:it_IT: translation for kernel-hacking docs: Fix the reference labels in Locking.rst doc: tracing: Fix a typo of trace_stat mm: Introduce new type vm_fault_t ... |
||
Linus Torvalds
|
b018fc9800 |
Power management updates for 4.19-rc1
- Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJbcqOqAAoJEILEb/54YlRxOxMP/2ZFvnXU0pey/VX/+TelLMS7 /ROVGQ+s75QP1c9P/3BjvnXc0dsMRLRFPog+7wyoG/2DbEIV25COyAYsmSE0TRni XUaZO6YAx4/e3pm2AfamYbLCPvjw85eucHg5QJQ4b1mSVRNJOsNv+fUo6lmxwvnm j9kHvfttFeIhoa/3wa7hbhPKLln46atnpVSxCIceY7L5EFNhkKBvQt6B5yx9geb9 QMY6ohgkyN+bnK9QySXX+trcWpzx1uGX0apI07NkX7n9QGFdU4lCW8lsAf8jMC3g PPValTsUQsdRONUJJsrgqBioq4tvtgQWibyS2tfRrOGXYvHpJNpGmHVplfsrf/SE cvlsciR47YbmrXZuqg/r8hql+qefNN16/rnZIZ9VnbcG806VBy2z8IzI5wcdWR7p vzxhbCqVqOHcEdEwRwvuM2io67MWvkGtKsbCP+33DBh8SubpsECpKN4nIDboa3SE CJ15RUqXnF6enmmfCKOoHZeu7iXWDz6Pi71XmRzaj9DqbITVV281IerqLgV3rbal BVa53+202iD0IP+2b7KedGe/5ALlI97ffN0gB+L/eB832853DKSZQKzcvvpRhEN7 Iv2crnUwuQED9ns8P7hzp1Bk9CFCAOLW8UM43YwZRPWnmdeSsPJusJ5lzkAf7bss wfsFoUE3RaY4msnuHyCh =kv2M -----END PGP SIGNATURE----- Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ... |
||
Linus Torvalds
|
f66dc72320 |
dma-mapping updates for 4.19
- a series from Robin to fix bus imposed dma limits by adding a separate mask for them to struct device instead of trying to squeeze a second meaning out of the existing dma mask as we did before. This has ACKs from the various other subsystems touched - a small swiotlb cleanup from Kees (acked by Konrad) - conversion of nios2 and sh to the new generic dma-noncoherent code. Various other architecture conversions will come through the architectures maintainers trees. -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAltxLuILHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPKMA//WY7UGhTrQ9kSjrfCRYJnSgLPjkqwY1wuYdXg1FSw rUYtQXCem59W48aX9QqHzGiCXf3uVJDBCO7/ikP8R/hHJTC/ih6tTJAtKMBTaDm5 NEVU4lZCzHfzliF3vhj/3+ifWThI0gSo5QQolf4hD5255a95HMLZgJ9zt0IRVgdj aKfFfKG824LX+G4iuN27jwmvfOJM4KwzaAFID6Rc4Pt1BXy3CmLkED63p6YvTAk/ pCR9LZpYWPccEuA1YfHoDJrB4onTw7zkVHFBtMZ5xW+ypJwRACSpLp/8IjeG841x /vA3BsDNu8zrRj2cHpD+fViPriMm/qdMew45keII/0jCeCs640wg9Cy7f6yl2QQh nsCJA8DEKvY8ebaX12XyWC3GNbLNru1XORrMl9+Lqu0kUHbdNxRDg47fWILLdxGc QvgassFOxb7wg9GwIsoGpOItagl2hHP3j0vMrHlfWaBNefi5ZtWiZs8aJBgm2rJm kzjmXGzx9IBy5SWSpou5UDCvf4xF7CkTA11YKPyBt2H3hquFKBH6R+6SzAm0n4rn WcAlqx4BQX1no/p0hPM4b01yPwgd3OmNmITAaYKWTvDXKpImRkPYWIfvLQBx4/PW 9TyVd1QWO1wMbCziVCaHVwpsNAHFTK/kw41OLjK4H1P+HMorGH0crhimfl5BiaJY XJk= =WNwP -----END PGP SIGNATURE----- Merge tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - a series from Robin to fix bus imposed dma limits by adding a separate mask for them to struct device instead of trying to squeeze a second meaning out of the existing dma mask as we did before. This has ACKs from the various other subsystems touched - a small swiotlb cleanup from Kees (acked by Konrad) - conversion of nios2 and sh to the new generic dma-noncoherent code. Various other architecture conversions will come through the architectures maintainers trees. * tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping: sh: use generic dma_noncoherent_ops sh: split arch/sh/mm/consistent.c sh: use dma_direct_ops for the CONFIG_DMA_COHERENT case sh: introduce a sh_cacheop_vaddr helper sh: simplify get_arch_dma_ops OF: Don't set default coherent DMA mask ACPI/IORT: Don't set default coherent DMA mask iommu/dma: Respect bus DMA limit for IOVAs of/device: Set bus DMA mask as appropriate ACPI/IORT: Set bus DMA mask as appropriate dma-mapping: Generalise dma_32bit_limit flag ACPI/IORT: Support address size limit for root complexes of/platform: Initialise default DMA masks nios2: use generic dma_noncoherent_ops swiotlb: clean up reporting dma-mapping: relax warning for per-device areas |
||
Linus Torvalds
|
73ba2fb33c |
for-4.19/block-20180812
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAltwvasQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpv65EACTq5gSLnJBI6ZPr1RAHruVDnjfzO2Veitl tUtjm0XfWmnEiwQ3dYvnyhy99xbyaG3900d9BClCTlH6xaUdSiQkDpcKG/R2F36J 5mZitYukQcpFAQJWF8YKsTTE7JPl4VglCIDqYiC4+C3rOSVi8lrKn2qp4J4MMCFn thRg3jCcq7c5s9Eigsop1pXWQSasubkXfk55Krcp4oybKYpYRKXXf74Mj14QAbwJ QHN3VisyAUWoBRg7UQZo1Npe2oPk6bbnJypnjf8M0M2EnlvddEkIlHob91sodka8 6p4APOEu5cbyXOBCAQsw/koff14mb8aEadqeQA68WvXfIdX9ZjfxCX0OoC3sBEXk yqJhZ0C980AM13zIBD8ejv4uasGcPca8W+47mE5P8sRiI++5kBsFWDZPCtUBna0X 2Kh24NsmEya9XRR5vsB84dsIPQ3tLMkxg/IgQRVDaSnfJz0c/+zm54xDyKRaFT4l 5iERk2WSkm9+8jNfVmWG0edrv6nRAXjpGwFfOCPh6/LCSCi4xQRULYN7sVzsX8ZK FRjt24HftBI8mJbh4BtweJvg+ppVe1gAk3IO3HvxAQhv29Hz+uvFYe9kL+3N8LJA Qosr9n9O4+wKYizJcDnw+5iPqCHfAwOm9th4pyedR+R7SmNcP3yNC8AbbheNBiF5 Zolos5H+JA== =b9ib -----END PGP SIGNATURE----- Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ... |
||
Linus Torvalds
|
958f338e96 |
Merge branch 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge L1 Terminal Fault fixes from Thomas Gleixner: "L1TF, aka L1 Terminal Fault, is yet another speculative hardware engineering trainwreck. It's a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Cache when the page table entry controlling the virtual address, which is used for the access, has the Present bit cleared or other reserved bits set. If an instruction accesses a virtual address for which the relevant page table entry (PTE) has the Present bit cleared or other reserved bits set, then speculative execution ignores the invalid PTE and loads the referenced data if it is present in the Level 1 Data Cache, as if the page referenced by the address bits in the PTE was still present and accessible. While this is a purely speculative mechanism and the instruction will raise a page fault when it is retired eventually, the pure act of loading the data and making it available to other speculative instructions opens up the opportunity for side channel attacks to unprivileged malicious code, similar to the Meltdown attack. While Meltdown breaks the user space to kernel space protection, L1TF allows to attack any physical memory address in the system and the attack works across all protection domains. It allows an attack of SGX and also works from inside virtual machines because the speculation bypasses the extended page table (EPT) protection mechanism. The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646 The mitigations provided by this pull request include: - Host side protection by inverting the upper address bits of a non present page table entry so the entry points to uncacheable memory. - Hypervisor protection by flushing L1 Data Cache on VMENTER. - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT by offlining the sibling CPU threads. The knobs are available on the kernel command line and at runtime via sysfs - Control knobs for the hypervisor mitigation, related to L1D flush and SMT control. The knobs are available on the kernel command line and at runtime via sysfs - Extensive documentation about L1TF including various degrees of mitigations. Thanks to all people who have contributed to this in various ways - patches, review, testing, backporting - and the fruitful, sometimes heated, but at the end constructive discussions. There is work in progress to provide other forms of mitigations, which might be less horrible performance wise for a particular kind of workloads, but this is not yet ready for consumption due to their complexity and limitations" * 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) x86/microcode: Allow late microcode loading with SMT disabled tools headers: Synchronise x86 cpufeatures.h for L1TF additions x86/mm/kmmio: Make the tracer robust against L1TF x86/mm/pat: Make set_memory_np() L1TF safe x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert x86/speculation/l1tf: Invert all not present mappings cpu/hotplug: Fix SMT supported evaluation KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry x86/speculation: Simplify sysfs report of VMX L1TF vulnerability Documentation/l1tf: Remove Yonah processors from not vulnerable list x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr() x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d x86: Don't include linux/irq.h from asm/hardirq.h x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d x86/irq: Demote irq_cpustat_t::__softirq_pending to u16 x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush() x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush() cpu/hotplug: detect SMT disabled by BIOS ... |
||
Petr Mladek
|
9f68cb5791 | Merge branch 'for-4.19-nmi' into for-linus | ||
Rafael J. Wysocki
|
7425ecd5e3 |
Merge branch 'pm-cpufreq'
Merge cpufreq changes for 4.19. These are driver extensions, some driver and core fixes and a new tracepoint for the tracking of frequency limits changes (coming from Android). * pm-cpufreq: cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding cpufreq: imx6q/thermal: imx: register cooling device depending on OF cpufreq: intel_pstate: use match_string() helper |
||
Rafael J. Wysocki
|
17bc3432e3 |
Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'
Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure |
||
Linus Torvalds
|
e5a32b5b21 |
Here are the main MIPS changes for 4.19.
An overview of the general architecture changes: - Massive DMA ops refactoring from Christoph Hellwig (huzzah for deleting crufty code!). - We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes & corresponding regsets to expose DSP ASE & floating point mode state respectively, both for live debugging & core dumps. - We better optimize our code by hard-coding cpu_has_* macros at compile time where their values are known due to the ISA revision that the kernel build is targeting. - The EJTAG exception handler now better handles SMP systems, where it was previously possible for CPUs to clobber a register value saved by another CPU. - Our implementation of memset() gained a couple of fixes for MIPSr6 systems to return correct values in some cases where stores fault. - We now implement ioremap_wc() using the uncached-accelerated cache coherency attribute where supported, which is detected during boot, and fall back to plain uncached access where necessary. The MIPS-specific (and unused in tree) ioremap_uncached_accelerated() & ioremap_cacheable_cow() are removed. - The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP systems by reworking the way we ensure remote CPUs that may be running threads within the affected process switch mode. - Systems using the MIPS Coherence Manager will now set the MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache maintenance overhead when flushing the icache. - A few fixes were made for building with clang/LLVM, which now sucessfully builds kernels for many of our platforms. - Miscellaneous cleanups all over. And some platform-specific changes: - ar7 gained stubs for a few clock API functions to fix build failures for some drivers. - ath79 gained support for a few new SoCs, a few fixes & better gpio-keys support. - Ci20 now exposes its SPI bus using the spi-gpio driver. - The generic platform can now auto-detect a suitable value for PHYS_OFFSET based upon the memory map described by the device tree, allowing us to avoid wasting memory on page book-keeping for systems where RAM starts at a non-zero physical address. - Ingenic systems using the jz4740 platform code now link their vmlinuz higher to allow for kernels of a realistic size. - Loongson32 now builds the kernel targeting MIPSr1 rather than MIPSr2 to avoid CPU errata. - Loongson64 gains a couple of fixes, a workaround for a write buffering issue & support for the Loongson 3A R3.1 CPU. - Malta now uses the piix4-poweroff driver to handle powering down. - Microsemi Ocelot gained support for its SPI bus & NOR flash, its second MDIO bus and can now be supported by a FIT/.itb image. - Octeon saw a bunch of header cleanups which remove a lot of duplicate or unused code. -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW3G6JxUccGF1bC5idXJ0 b25AbWlwcy5jb20ACgkQPqefrLV1AN0n/gD/Rpdgay31G/4eTTKBmBrcaju6Shjt /2Iu6WC5Sj4hDHUBAJSbuI+B9YjcNsjekBYxB/LLD7ImcLBl6nLMIvKmXLAL =cUiF -----END PGP SIGNATURE----- Merge tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Paul Burton: "Here are the main MIPS changes for 4.19. An overview of the general architecture changes: - Massive DMA ops refactoring from Christoph Hellwig (huzzah for deleting crufty code!). - We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes & corresponding regsets to expose DSP ASE & floating point mode state respectively, both for live debugging & core dumps. - We better optimize our code by hard-coding cpu_has_* macros at compile time where their values are known due to the ISA revision that the kernel build is targeting. - The EJTAG exception handler now better handles SMP systems, where it was previously possible for CPUs to clobber a register value saved by another CPU. - Our implementation of memset() gained a couple of fixes for MIPSr6 systems to return correct values in some cases where stores fault. - We now implement ioremap_wc() using the uncached-accelerated cache coherency attribute where supported, which is detected during boot, and fall back to plain uncached access where necessary. The MIPS-specific (and unused in tree) ioremap_uncached_accelerated() & ioremap_cacheable_cow() are removed. - The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP systems by reworking the way we ensure remote CPUs that may be running threads within the affected process switch mode. - Systems using the MIPS Coherence Manager will now set the MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache maintenance overhead when flushing the icache. - A few fixes were made for building with clang/LLVM, which now sucessfully builds kernels for many of our platforms. - Miscellaneous cleanups all over. And some platform-specific changes: - ar7 gained stubs for a few clock API functions to fix build failures for some drivers. - ath79 gained support for a few new SoCs, a few fixes & better gpio-keys support. - Ci20 now exposes its SPI bus using the spi-gpio driver. - The generic platform can now auto-detect a suitable value for PHYS_OFFSET based upon the memory map described by the device tree, allowing us to avoid wasting memory on page book-keeping for systems where RAM starts at a non-zero physical address. - Ingenic systems using the jz4740 platform code now link their vmlinuz higher to allow for kernels of a realistic size. - Loongson32 now builds the kernel targeting MIPSr1 rather than MIPSr2 to avoid CPU errata. - Loongson64 gains a couple of fixes, a workaround for a write buffering issue & support for the Loongson 3A R3.1 CPU. - Malta now uses the piix4-poweroff driver to handle powering down. - Microsemi Ocelot gained support for its SPI bus & NOR flash, its second MDIO bus and can now be supported by a FIT/.itb image. - Octeon saw a bunch of header cleanups which remove a lot of duplicate or unused code" * tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (123 commits) MIPS: Remove remnants of UASM_ISA MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send() MIPS: VDSO: Force link endianness MIPS: Always specify -EB or -EL when using clang MIPS: Use dins to simplify __write_64bit_c0_split() MIPS: Use read-write output operand in __write_64bit_c0_split() MIPS: Avoid using array as parameter to write_c0_kpgd() MIPS: vdso: Allow clang's --target flag in VDSO cflags MIPS: genvdso: Remove GOT checks MIPS: Remove obsolete MIPS checks for DST node "chosen@0" MIPS: generic: Remove input symbols from defconfig MIPS: Delete unused code in linux32.c MIPS: Remove unused sys_32_mmap2 MIPS: Remove nabi_no_regargs mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123 mips: dts: mscc: Add spi on Ocelot MIPS: Loongson: Merge load addresses MIPS: Loongson: Set Loongson32 to MIPS32R1 MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller MIPS: generic: Select MIPS_AUTO_PFN_OFFSET ... |
||
Linus Torvalds
|
2280a5360e |
Merge branch 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller: - parisc now uses the generic dma_noncoherent_ops implementation (Christoph Hellwig) - further memory barrier and spinlock improvements (John David Anglin) - prepare removal of current_text_addr() functions (Nick Desaulniers) - improve kernel stack unwinding on parisc (me) - drop ENOTSUP which was defined on parisc only (me) * 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix and improve kernel stack unwinding parisc: Remove unnecessary barriers from spinlock.h parisc: Remove ordered stores from syscall.S parisc: prefer _THIS_IP_ and _RET_IP_ statement expressions parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature parisc: Drop architecture-specific ENOTSUP define parisc: use generic dma_noncoherent_ops parisc: always use flush_kernel_dcache_range for DMA cache maintainance parisc: merge pcx_dma_ops and pcxl_dma_ops |
||
Linus Torvalds
|
13e091b6dd |
Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner: "Early TSC based time stamping to allow better boot time analysis. This comes with a general cleanup of the TSC calibration code which grew warts and duct taping over the years and removes 250 lines of code. Initiated and mostly implemented by Pavel with help from various folks" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/kvmclock: Mark kvm_get_preset_lpj() as __init x86/tsc: Consolidate init code sched/clock: Disable interrupts when calling generic_sched_clock_init() timekeeping: Prevent false warning when persistent clock is not available sched/clock: Close a hole in sched_clock_init() x86/tsc: Make use of tsc_calibrate_cpu_early() x86/tsc: Split native_calibrate_cpu() into early and late parts sched/clock: Use static key for sched_clock_running sched/clock: Enable sched clock early sched/clock: Move sched clock initialization and merge with generic clock x86/tsc: Use TSC as sched clock early x86/tsc: Initialize cyc2ns when tsc frequency is determined x86/tsc: Calibrate tsc only once ARM/time: Remove read_boot_clock64() s390/time: Remove read_boot_clock64() timekeeping: Default boot time offset to local_clock() timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset() s390/time: Add read_persistent_wall_and_boot_offset() x86/xen/time: Output xen sched_clock time from 0 x86/xen/time: Initialize pv xen time in init_hypervisor_platform() ... |
||
Ravi Bangoria
|
6d43743e90 |
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Add addition argument 'arch_uprobe' to uprobe_write_opcode(). We need this in later set of patches. Link: http://lkml.kernel.org/r/20180809041856.1547-3-ravi.bangoria@linux.ibm.com Reviewed-by: Song Liu <songliubraving@fb.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Ravi Bangoria
|
38e967ae1e |
Uprobes: Simplify uprobe_register() body
Simplify uprobe_register() function body and let __uprobe_register() handle everything. Also move dependency functions around to avoid build failures. Link: http://lkml.kernel.org/r/20180809041856.1547-2-ravi.bangoria@linux.ibm.com Reviewed-by: Song Liu <songliubraving@fb.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Linus Torvalds
|
203b4fc903 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Thomas Gleixner: - Make lazy TLB mode even lazier to avoid pointless switch_mm() operations, which reduces CPU load by 1-2% for memcache workloads - Small cleanups and improvements all over the place * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Remove redundant check for kmem_cache_create() arm/asm/tlb.h: Fix build error implicit func declaration x86/mm/tlb: Make clear_asid_other() static x86/mm/tlb: Skip atomic operations for 'init_mm' in switch_mm_irqs_off() x86/mm/tlb: Always use lazy TLB mode x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs x86/mm/tlb: Make lazy TLB mode lazier x86/mm/tlb: Restructure switch_mm_irqs_off() x86/mm/tlb: Leave lazy TLB mode at page table free time mm: Allocate the mm_cpumask (mm->cpu_bitmap[]) dynamically based on nr_cpu_ids x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap: Update pgtable free interfaces with addr x86/mm: Disable ioremap free page handling on x86-PAE |
||
Linus Torvalds
|
1e45e9a95e |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner: "The timers departement more or less proudly presents: - More Y2038 timekeeping work mostly in the core code. The work is slowly, but steadily targeting the actuall syscalls. - Enhanced timekeeping suspend/resume support by utilizing clocksources which do not stop during suspend, but are otherwise not the main timekeeping clocksources. - Make NTP adjustmets more accurate and immediate when the frequency is set directly and not incrementally. - Sanitize the overrung handing of posix timers - A new timer driver for Mediatek SoCs - The usual pile of fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) clockevents: Warn if cpu_all_mask is used as cpumask tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag timers: Clear timer_base::must_forward_clk with timer_base::lock held clocksource/drivers/sprd: Register one always-on timer to compensate suspend time clocksource/drivers/timer-mediatek: Add support for system timer clocksource/drivers/timer-mediatek: Convert the driver to timer-of clocksource/drivers/timer-mediatek: Use specific prefix for GPT clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek clocksource/drivers/timer-mediatek: Add system timer bindings clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask time: Introduce one suspend clocksource to compensate the suspend time time: Fix extra sleeptime injection when suspend fails timekeeping/ntp: Constify some function arguments ntp: Use kstrtos64 for s64 variable ntp: Remove redundant arguments timer: Fix coding style ktime: Provide typesafe ktime_to_ns() hrtimer: Improve kernel message printing ... |
||
Linus Torvalds
|
8603596a32 |
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf update from Thomas Gleixner: "The perf crowd presents: Kernel updates: - Removal of jprobes - Cleanup and consolidatation the handling of kprobes - Cleanup and consolidation of hardware breakpoints - The usual pile of fixes and updates to PMUs and event descriptors Tooling updates: - Updates and improvements all over the place. Nothing outstanding, just the (good) boring incremental grump work" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits) perf trace: Do not require --no-syscalls to suppress strace like output perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h perf tools: Allow overriding MAX_NR_CPUS at compile time perf bpf: Show better message when failing to load an object perf list: Unify metric group description format with PMU event description perf vendor events arm64: Update ThunderX2 implementation defined pmu core events perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet perf cs-etm: Fix start tracing packet handling perf build: Fix installation directory for eBPF perf c2c report: Fix crash for empty browser perf tests: Fix indexing when invoking subtests perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg perf trace beauty: Do not print NULL strarray entries perf beauty: Add a generator for IPPROTO_ socket's protocol constants tools include uapi: Grab a copy of linux/in.h perf tests: Fix complex event name parsing perf evlist: Fix error out while applying initial delay and LBR ... |
||
Linus Torvalds
|
de5d1b39ea |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking/atomics update from Thomas Gleixner: "The locking, atomics and memory model brains delivered: - A larger update to the atomics code which reworks the ordering barriers, consolidates the atomic primitives, provides the new atomic64_fetch_add_unless() primitive and cleans up the include hell. - Simplify cmpxchg() instrumentation and add instrumentation for xchg() and cmpxchg_double(). - Updates to the memory model and documentation" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) locking/atomics: Rework ordering barriers locking/atomics: Instrument cmpxchg_double*() locking/atomics: Instrument xchg() locking/atomics: Simplify cmpxchg() instrumentation locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation tools/memory-model: Rename litmus tests to comply to norm7 tools/memory-model/Documentation: Fix typo, smb->smp sched/Documentation: Update wake_up() & co. memory-barrier guarantees locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock() sched/core: Use smp_mb() in wake_woken_function() tools/memory-model: Add informal LKMM documentation to MAINTAINERS locking/atomics/Documentation: Describe atomic_set() as a write operation tools/memory-model: Make scripts executable tools/memory-model: Remove ACCESS_ONCE() from model tools/memory-model: Remove ACCESS_ONCE() from recipes locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example MAINTAINERS: Add Daniel Lustig as an LKMM reviewer tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name tools/memory-model: Add litmus test for full multicopy atomicity locking/refcount: Always allow checked forms ... |
||
Linus Torvalds
|
1c59477428 |
Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug update from Thomas Gleixner: "A trivial name fix for the hotplug state machine" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Clarify CPU hotplug step name for timers |
||
Linus Torvalds
|
f7951c33f0 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner: - Cleanup and improvement of NUMA balancing - Refactoring and improvements to the PELT (Per Entity Load Tracking) code - Watchdog simplification and related cleanups - The usual pile of small incremental fixes and improvements * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) watchdog: Reduce message verbosity stop_machine: Reflow cpu_stop_queue_two_works() sched/numa: Move task_numa_placement() closer to numa_migrate_preferred() sched/numa: Use group_weights to identify if migration degrades locality sched/numa: Update the scan period without holding the numa_group lock sched/numa: Remove numa_has_capacity() sched/numa: Modify migrate_swap() to accept additional parameters sched/numa: Remove unused task_capacity from 'struct numa_stats' sched/numa: Skip nodes that are at 'hoplimit' sched/debug: Reverse the order of printing faults sched/numa: Use task faults only if numa_group is not yet set up sched/numa: Set preferred_node based on best_cpu sched/numa: Simplify load_too_imbalanced() sched/numa: Evaluate move once per node sched/numa: Remove redundant field sched/debug: Show the sum wait time of a task group sched/fair: Remove #ifdefs from scale_rt_capacity() sched/core: Remove get_cpu() from sched_fork() sched/cpufreq: Clarify sugov_get_util() sched/sysctl: Remove unused sched_time_avg_ms sysctl ... |
||
Linus Torvalds
|
2406fb8d94 |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner: "A single bugfix to prevent a pinned thread which queues stomp machine work to be preempted by the stopper thread on its CPU which causes a live lock as it is unable to wake the second CPUs stopper thread" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stop_machine: Atomically queue and wake stopper threads |
||
Linus Torvalds
|
b99cdfdf0b |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Thomas Gleixner: "A large update to RCU: Preparatory work for consolidating the RCU flavors: - Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt, and RCU-sched flavors, replacing the old ->gpnum and ->completed pair of fields. This change allows lockless code to obtain the complete grace-period state with a single READ_ONCE(), which is needed to maintain tolerable lock contention during the upcoming consolidation of the three RCU flavors. Note that grace-period sequence numbers are already used by rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus already heavily used and well-tested. Joel Fernandes contributed a number of excellent fixes and improvements. - Clean up some grace-period-reporting loose ends, including improving the handling of quiescent states from offline CPUs and fixing some false-positive WARN_ON_ONCE() invocations. (Strictly speaking, the WARN_ON_ONCE() invocations were quite correct, but their invariants were (harmlessly) violated by the earlier sloppy handling of quiescent states from offline CPUs.) In addition, improve grace-period forward-progress guarantees so as to allow removal of fail-safe checks that required otherwise needless lock acquisitions. Finally, add more diagnostics to help debug the upcoming consolidation of the RCU-bh, RCU-preempt, and RCU-sched flavors. The rest: - SRCU updates - Updates to rcutorture and associated scripting. - The usual pile of miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits) rcutorture: Fix rcu_barrier successes counter rcutorture: Add support to detect if boost kthread prio is too low rcutorture: Use monotonic timestamp for stall detection rcutorture: Make boost test more robust rcutorture: Disable RT throttling for boost tests rcutorture: Emphasize testing of single reader protection type rcutorture: Handle extended read-side critical sections rcutorture: Make rcu_torture_timer() use rcu_torture_one_read() rcutorture: Use per-CPU random state for rcu_torture_timer() rcutorture: Use atomic increment for n_rcu_torture_timers rcutorture: Extract common code from rcu_torture_reader() rcuperf: Remove unused torturing_tasks() function rcu: Remove rcutorture test version and sequence number rcutorture: Change units of onoff_interval to jiffies rcu: Assign higher prio to RCU threads if rcutorture is built-in rculist: Improve documentation for list_for_each_entry_from_rcu() srcu: Add grace-period number to rcutorture statistics printout rcu: Print stall-warning NMI dyntick state in hexadecimal MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries rcu: Make rcu_seq_diff() more exact ... |
||
Linus Torvalds
|
d0daaeaf60 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull genirq updates from Thomas Gleixner: "The irq departement provides: - A synchronization fix for free_irq() to synchronize just the removed interrupt thread on shared interrupt lines. - Consolidate the multi low level interrupt entry handling and mvoe it to the generic code instead of adding yet another copy for RISC-V - Refactoring of the ARM LPI allocator and LPI exposure to the hypervisor - Yet another interrupt chip driver for the JZ4725B SoC - Speed up for /proc/interrupts as people seem to love reading this file with high frequency - Miscellaneous fixes and updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER arm64: Use the new GENERIC_IRQ_MULTI_HANDLER ARM: Convert to GENERIC_IRQ_MULTI_HANDLER irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices dt-bindings: irqchip: renesas-irqc: Document r8a77980 support dt-bindings: irqchip: renesas-irqc: Document r8a77470 support irqchip/ingenic: Add support for the JZ4725B SoC irqchip/stm32: Add exti0 translation for stm32mp1 genirq: Remove redundant NULL pointer check in __free_irq() irqchip/gic-v3-its: Honor hypervisor enforced LPI range irqchip/gic-v3: Expose GICD_TYPER in the rdist structure irqchip/gic-v3-its: Drop chunk allocation compatibility irqchip/gic-v3-its: Move minimum LPI requirements to individual busses irqchip/gic-v3-its: Use full range of LPIs irqchip/gic-v3-its: Refactor LPI allocator genirq: Synchronize only with single thread on free_irq() genirq: Update code comments wrt recycled thread_mask ... |
||
David S. Miller
|
c1617fb4c5 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-13 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add driver XDP support for veth. This can be used in conjunction with redirect of another XDP program e.g. sitting on NIC so the xdp_frame can be forwarded to the peer veth directly without modification, from Toshiaki. 2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT in order to provide more control and visibility on where a SO_REUSEPORT sk should be located, and the latter enables to directly select a sk from the bpf map. This also enables map-in-map for application migration use cases, from Martin. 3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id of cgroup v2 that is the ancestor of the cgroup associated with the skb at the ancestor_level, from Andrey. 4) Implement BPF fs map pretty-print support based on BTF data for regular hash table and LRU map, from Yonghong. 5) Decouple the ability to attach BTF for a map from the key and value pretty-printer in BPF fs, and enable further support of BTF for maps for percpu and LPM trie, from Daniel. 6) Implement a better BPF sample of using XDP's CPU redirect feature for load balancing SKB processing to remote CPU. The sample implements the same XDP load balancing as Suricata does which is symmetric hash based on IP and L4 protocol, from Jesper. 7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s critical path as it is ensured that the allocator is present, from Björn. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Helge Deller
|
93cb8e20d5 |
parisc: Drop architecture-specific ENOTSUP define
parisc is the only Linux architecture which has defined a value for ENOTSUP. All other architectures #define ENOTSUP as EOPNOTSUPP in their libc headers. Having an own value for ENOTSUP which is different than EOPNOTSUPP often gives problems with userspace programs which expect both to be the same. One such example is a build error in the libuv package, as can be seen in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900237. Since we dropped HP-UX support, there is no real benefit in keeping an own value for ENOTSUP. This patch drops the parisc value for ENOTSUP from the kernel sources. glibc needs no patch, it reuses the exported headers. Signed-off-by: Helge Deller <deller@gmx.de> |
||
Daniel Borkmann
|
e8d2bec045 |
bpf: decouple btf from seq bpf fs dump and enable more maps
Commit |
||
Linus Torvalds
|
b5b1404d08 |
init: rename and re-order boot_cpu_state_init()
This is purely a preparatory patch for upcoming changes during the 4.19 merge window. We have a function called "boot_cpu_state_init()" that isn't really about the bootup cpu state: that is done much earlier by the similarly named "boot_cpu_init()" (note lack of "state" in name). This function initializes some hotplug CPU state, and needs to run after the percpu data has been properly initialized. It even has a comment to that effect. Except it _doesn't_ actually run after the percpu data has been properly initialized. On x86 it happens to do that, but on at least arm and arm64, the percpu base pointers are initialized by the arch-specific 'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init(). This had some unexpected results, and in particular we have a patch pending for the merge window that did the obvious cleanup of using 'this_cpu_write()' in the cpu hotplug init code: - per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE; + this_cpu_write(cpuhp_state.state, CPUHP_ONLINE); which is obviously the right thing to do. Except because of the ordering issue, it actually failed miserably and unexpectedly on arm64. So this just fixes the ordering, and changes the name of the function to be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu hotplug state, because the core CPU state was supposed to have already been done earlier. Marked for stable, since the (not yet merged) patch that will show this problem is marked for stable. Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David S. Miller
|
6a92ef08a1 | Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net | ||
Jann Horn
|
42a0cc3478 |
sys: don't hold uts_sem while accessing userspace memory
Holding uts_sem as a writer while accessing userspace memory allows a
namespace admin to stall all processes that attempt to take uts_sem.
Instead, move data through stack buffers and don't access userspace memory
while uts_sem is held.
Cc: stable@vger.kernel.org
Fixes:
|
||
Jann Horn
|
5820f140ed |
userns: move user access out of the mutex
The old code would hold the userns_state_mutex indefinitely if
memdup_user_nul stalled due to e.g. a userfault region. Prevent that by
moving the memdup_user_nul in front of the mutex_lock().
Note: This changes the error precedence of invalid buf/count/*ppos vs
map already written / capabilities missing.
Fixes:
|
||
Martin KaFai Lau
|
2dbb9b9e6d |
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT
This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
Martin KaFai Lau
|
5dc4c4b7d4 |
bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY
This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. To unleash the full potential of a bpf prog, it is essential for the userspace to be capable of directly setting up a bpf map which can then be consumed by the bpf prog to make decision. In this case, decide which SO_REUSEPORT sk to serve the incoming request. By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control and visibility on where a SO_REUSEPORT sk should be located in a bpf map. The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that the bpf prog can directly select a sk from the bpf map. That will raise the programmability of the bpf prog attached to a reuseport group (a group of sk serving the same IP:PORT). For example, in UDP, the bpf prog can peek into the payload (e.g. through the "data" pointer introduced in the later patch) to learn the application level's connection information and then decide which sk to pick from a bpf map. The userspace can tightly couple the sk's location in a bpf map with the application logic in generating the UDP payload's connection information. This connection info contact/API stays within the userspace. Also, when used with map-in-map, the userspace can switch the old-server-process's inner map to a new-server-process's inner map in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)". The bpf prog will then direct incoming requests to the new process instead of the old process. The old process can finish draining the pending requests (e.g. by "accept()") before closing the old-fds. [Note that deleting a fd from a bpf map does not necessary mean the fd is closed] During map_update_elem(), Only SO_REUSEPORT sk (i.e. which has already been added to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is "bind()" for UDP or "bind()+listen()" for TCP. These conditions are ensured in "reuseport_array_update_check()". A SO_REUSEPORT sk can only be added once to a map (i.e. the same sk cannot be added twice even to the same map). SO_REUSEPORT already allows another sk to be created for the same IP:PORT. There is no need to re-create a similar usage in the BPF side. When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"), it will notify the bpf map to remove it from the map also. It is done through "bpf_sk_reuseport_detach()" and it will only be called if >=1 of the "reuse->sock[]" has ever been added to a bpf map. The map_update()/map_delete() has to be in-sync with the "reuse->socks[]". Hence, the same "reuseport_lock" used by "reuse->socks[]" has to be used here also. Care has been taken to ensure the lock is only acquired when the adding sk passes some strict tests. and freeing the map does not require the reuseport_lock. The reuseport_array will also support lookup from the syscall side. It will return a sock_gen_cookie(). The sock_gen_cookie() is on-demand (i.e. a sk's cookie is not generated until the very first map_lookup_elem()). The lookup cookie is 64bits but it goes against the logical userspace expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also). It may catch user in surprise if we enforce value_size=8 while userspace still pass a 32bits fd during update. Supporting different value_size between lookup and update seems unintuitive also. We also need to consider what if other existing fd based maps want to return 64bits value from syscall's lookup in the future. Hence, reuseport_array supports both value_size 4 and 8, and assuming user will usually use value_size=4. The syscall's lookup will return ENOSPC on value_size=4. It will will only return 64bits value from sock_gen_cookie() when user consciously choose value_size=8 (as a signal that lookup is desired) which then requires a 64bits value in both lookup and update. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
Steven Rostedt (VMware)
|
f8a79d5c7e |
tracepoints: Free early tracepoints after RCU is initialized
When enabling trace events via the kernel command line, I hit this warning:
WARNING: CPU: 0 PID: 13 at kernel/rcu/srcutree.c:236 check_init_srcu_struct+0xe/0x61
Modules linked in:
CPU: 0 PID: 13 Comm: watchdog/0 Not tainted 4.18.0-rc6-test+ #6
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
RIP: 0010:check_init_srcu_struct+0xe/0x61
Code: 48 c7 c6 ec 8a 65 b4 e8 ff 79 fe ff 48 89 df 31 f6 e8 f2 fa ff ff 5a
5b 41 5c 5d c3 0f 1f 44 00 00 83 3d 68 94 b8 01 01 75 02 <0f> 0b 48 8b 87 f0
0a 00 00 a8 03 74 45 55 48 89 e5 41 55 41 54 4c
RSP: 0000:ffff96eb9ea03e68 EFLAGS: 00010246
RAX: ffff96eb962b5b01 RBX: ffffffffb4a87420 RCX: 0000000000000001
RDX: ffffffffb3107969 RSI: ffff96eb962b5b40 RDI: ffffffffb4a87420
RBP: ffff96eb9ea03eb0 R08: ffffabbd00cd7f48 R09: 0000000000000000
R10: ffff96eb9ea03e68 R11: ffffffffb4a6eec0 R12: ffff96eb962b5b40
R13: ffff96eb9ea03ef8 R14: ffffffffb3107969 R15: ffffffffb3107948
FS: 0000000000000000(0000) GS:ffff96eb9ea00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff96eb13ab2000 CR3: 0000000192a1e001 CR4: 00000000001606f0
Call Trace:
<IRQ>
? __call_srcu+0x2d/0x290
? rcu_process_callbacks+0x26e/0x448
? allocate_probes+0x2b/0x2b
call_srcu+0x13/0x15
rcu_free_old_probes+0x1f/0x21
rcu_process_callbacks+0x2ed/0x448
__do_softirq+0x172/0x336
irq_exit+0x62/0xb2
smp_apic_timer_interrupt+0x161/0x19e
apic_timer_interrupt+0xf/0x20
</IRQ>
The problem is that the enabling of trace events before RCU is set up will
cause SRCU to give this warning. To avoid this, add a list to store probes
that need to be freed till after RCU is initialized, and then free them
then.
Link: http://lkml.kernel.org/r/20180810113554.1df28050@gandalf.local.home
Link: http://lkml.kernel.org/r/20180810123517.5e9714ad@gandalf.local.home
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes:
|
||
Steven Rostedt (VMware)
|
016f8ffc48 |
uprobes: Use synchronize_rcu() not synchronize_sched()
While debugging another bug, I was looking at all the synchronize*()
functions being used in kernel/trace, and noticed that trace_uprobes was
using synchronize_sched(), with a comment to synchronize with
{u,ret}_probe_trace_func(). When looking at those functions, the data is
protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This
is using the wrong synchronize_*() function.
Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes:
|
||
Steven Rostedt (VMware)
|
e0a568dcd1 |
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
Now that some trace events can be protected by srcu_read_lock(tracepoint_srcu),
we need to make sure all locations that depend on this are also protected.
There were many places that did a synchronize_sched() thinking that it was
enough to protect againts access to trace events. This use to be the case,
but now that we use SRCU for _rcuidle() trace events, they may not be
protected by synchronize_sched(), as they may be called in paths that RCU is
not watching for preempt disable.
Fixes:
|
||
Colin Ian King
|
b207de3ec5 |
ftrace: Remove unused pointer ftrace_swapper_pid
Pointer ftrace_swapper_pid is defined but is never used hence it is
redundant and can be removed. The use of this variable was removed
in commit
|
||
Steven Rostedt (VMware)
|
3f1756dc21 |
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used by lockdep and irqsoff latency tracer. It made both use tracepoints. But the latency tracer is triggering warnings when using tracepoints to call into the latency tracer's routines. Mainly, they can be called from NMI context. If that happens, then the SRCU may not work properly because on some architectures, SRCU is not safe to be called in both NMI and non-NMI context. This is a partial revert of the clean up patch |
||
Steven Rostedt (VMware)
|
f27107fa20 |
tracing/irqsoff: Handle preempt_count for different configs
I was hitting the following warning:
WARNING: CPU: 0 PID: 1 at kernel/trace/trace_irqsoff.c:631 tracer_hardirqs_off+0x15/0x2a
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc6-test+ #13
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tracer_hardirqs_off+0x15/0x2a
Code: ff 85 c0 74 0e 8b 45 00 8b 50 04 8b 45 04 e8 35 ff ff ff 5d c3 55 64 a1 cc 37 51 c1 a9 ff ff ff 7f 89 e5 53 89 d3 89 ca 75 02 <0f> 0b e8 90 fc ff ff 85 c0 74 07 89 d8 e8 0c ff ff ff 5b 5d c3 55
EAX: 80000000 EBX: c04337f0 ECX: c04338e3 EDX: c04338e3
ESI: c04337f0 EDI: c04338e3 EBP: f2aa1d68 ESP: f2aa1d64
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210046
CR0: 80050033 CR2: 00000000 CR3: 01668000 CR4: 001406f0
Call Trace:
trace_irq_disable_rcuidle+0x63/0x6c
trace_hardirqs_off+0x26/0x30
default_send_IPI_mask_allbutself_logical+0x31/0x93
default_send_IPI_allbutself+0x37/0x48
native_send_call_func_ipi+0x4d/0x6a
smp_call_function_many+0x165/0x19d
? add_nops+0x34/0x34
? trace_hardirqs_on_caller+0x2d/0x2d
? add_nops+0x34/0x34
smp_call_function+0x1f/0x23
on_each_cpu+0x15/0x43
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_irq_disable_rcuidle+0x1/0x6c
text_poke_bp+0xa0/0xc2
? trace_hardirqs_on_caller+0x2d/0x2d
arch_jump_label_transform+0xa7/0xcb
? trace_irq_disable_rcuidle+0x5/0x6c
__jump_label_update+0x3e/0x6d
jump_label_update+0x7d/0x81
static_key_slow_inc_cpuslocked+0x58/0x6d
static_key_slow_inc+0x19/0x20
tracepoint_probe_register_prio+0x19e/0x1d1
? start_critical_timings+0x1c/0x1c
tracepoint_probe_register+0xf/0x11
irqsoff_tracer_init+0x21/0xf2
tracer_init+0x16/0x1a
trace_selftest_startup_irqsoff+0x25/0xc4
run_tracer_selftest+0xca/0x131
register_tracer+0xd5/0x172
? trace_event_define_fields_preemptirq_template+0x45/0x45
init_irqsoff_tracer+0xd/0x11
do_one_initcall+0xab/0x1e8
? rcu_read_lock_sched_held+0x3d/0x44
? trace_initcall_level+0x52/0x86
kernel_init_freeable+0x195/0x21a
? rest_init+0xb4/0xb4
kernel_init+0xd/0xe4
ret_from_fork+0x2e/0x38
It is due to running a CONFIG_PREEMPT_VOLUNTARY kernel, which would trigger
this warning every time:
WARN_ON_ONCE(preempt_count());
Because on CONFIG_PREEMPT_VOLUNTARY, preempt_count() is always zero.
This warning is to make sure preempt_count is set because
tracer_hardirqs_on() does a preempt_enable_notrace() to make the
preempt_trace() work properly, as being called by a trace event, the trace
event code disables preemption, and the tracer wants to know what the
preemption was before it was called.
Instead of enabling preemption like this, just record the preempt_count,
subtract PREEMPT_DISABLE_OFFSET from it (which is zero with !CONFIG_PREEMPT
set), and pass that value to the necessary functions, which should use the
passed in parameter instead of calling preempt_count() directly.
Fixes:
|
||
Steven Rostedt (VMware)
|
bff1b208a5 |
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used by lockdep and irqsoff latency tracer. It made both use tracepoints. But it caused lockdep to trigger several false positives. We have not figured out why yet, but removing lockdep from using the trace event hooks and just call its helper functions directly (like it use to), makes the problem go away. This is a partial revert of the clean up patch |
||
Yonghong Song
|
699c86d6ec |
bpf: btf: add pretty print for hash/lru_hash maps
Commit
|
||
Yonghong Song
|
dc1508a579 |
bpf: fix bpffs non-array map seq_show issue
In function map_seq_next() of kernel/bpf/inode.c,
the first key will be the "0" regardless of the map type.
This works for array. But for hash type, if it happens
key "0" is in the map, the bpffs map show will miss
some items if the key "0" is not the first element of
the first bucket.
This patch fixed the issue by guaranteeing to get
the first element, if the seq_show is just started,
by passing NULL pointer key to map_get_next_key() callback.
This way, no missing elements will occur for
bpffs hash table show even if key "0" is in the map.
Fixes:
|
||
Jesper Dangaard Brouer
|
1bf9116d08 |
xdp: fix bug in devmap teardown code path
Like cpumap teardown, the devmap teardown code also flush remaining xdp_frames, via bq_xmit_all() in case map entry is removed. The code can call xdp_return_frame_rx_napi, from the the wrong context, in-case ndo_xdp_xmit() fails. Fixes: |
||
Jesper Dangaard Brouer
|
ad0ab027fc |
xdp: fix bug in cpumap teardown code path
When removing a cpumap entry, a number of syncronization steps happen.
Eventually the teardown code __cpu_map_entry_free is invoked from/via
call_rcu.
The teardown code __cpu_map_entry_free() flushes remaining xdp_frames,
by invoking bq_flush_to_queue, which calls xdp_return_frame_rx_napi().
The issues is that the teardown code is not running in the RX NAPI
code path. Thus, it is not allowed to invoke the NAPI variant of
xdp_return_frame.
This bug was found and triggered by using the --stress-mode option to
the samples/bpf program xdp_redirect_cpu. It is hard to trigger,
because the ptr_ring have to be full and cpumap bulk queue max
contains 8 packets, and a remote CPU is racing to empty the ptr_ring
queue.
Fixes:
|
||
Eric W. Biederman
|
c3ad2c3b02 |
signal: Don't restart fork when signals come in.
Wen Yang <wen.yang99@zte.com.cn> and majiang <ma.jiang@zte.com.cn>
report that a periodic signal received during fork can cause fork to
continually restart preventing an application from making progress.
The code was being overly pessimistic. Fork needs to guarantee that a
signal sent to multiple processes is logically delivered before the
fork and just to the forking process or logically delivered after the
fork to both the forking process and it's newly spawned child. For
signals like periodic timers that are always delivered to a single
process fork can safely complete and let them appear to logically
delivered after the fork().
While examining this issue I also discovered that fork today will miss
signals delivered to multiple processes during the fork and handled by
another thread. Similarly the current code will also miss blocked
signals that are delivered to multiple process, as those signals will
not appear pending during fork.
Add a list of each thread that is currently forking, and keep on that
list a signal set that records all of the signals sent to multiple
processes. When fork completes initialize the new processes
shared_pending signal set with it. The calculate_sigpending function
will see those signals and set TIF_SIGPENDING causing the new task to
take the slow path to userspace to handle those signals. Making it
appear as if those signals were received immediately after the fork.
It is not possible to send real time signals to multiple processes and
exceptions don't go to multiple processes, which means that that are
no signals sent to multiple processes that require siginfo. This
means it is safe to not bother collecting siginfo on signals sent
during fork.
The sigaction of a child of fork is initially the same as the
sigaction of the parent process. So a signal the parent ignores the
child will also initially ignore. Therefore it is safe to ignore
signals sent to multiple processes and ignored by the forking process.
Signals sent to only a single process or only a single thread and delivered
during fork are treated as if they are received after the fork, and generally
not dealt with. They won't cause any problems.
V2: Added removal from the multiprocess list on failure.
V3: Use -ERESTARTNOINTR directly
V4: - Don't queue both SIGCONT and SIGSTOP
- Initialize signal_struct.multiprocess in init_task
- Move setting of shared_pending to before the new task
is visible to signals. This prevents signals from comming
in before shared_pending.signal is set to delayed.signal
and being lost.
V5: - rework list add and delete to account for idle threads
v6: - Use sigdelsetmask when removing stop signals
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200447
Reported-by: Wen Yang <wen.yang99@zte.com.cn> and
Reported-by: majiang <ma.jiang@zte.com.cn>
Fixes:
|
||
Daniel Borkmann
|
7c81c71730 |
bpf, sockmap: fix leak in bpf_tcp_sendmsg wait for mem path
In bpf_tcp_sendmsg() the sk_alloc_sg() may fail. In the case of
ENOMEM, it may also mean that we've partially filled the scatterlist
entries with pages. Later jumping to sk_stream_wait_memory()
we could further fail with an error for several reasons, however
we miss to call free_start_sg() if the local sk_msg_buff was used.
Fixes:
|
||
Daniel Borkmann
|
5121700b34 |
bpf, sockmap: fix bpf_tcp_sendmsg sock error handling
While working on bpf_tcp_sendmsg() code, I noticed that when a
sk->sk_err is set we error out with err = sk->sk_err. However
this is problematic since sk->sk_err is a positive error value
and therefore we will neither go into sk_stream_error() nor will
we report an error back to user space. I had this case with EPIPE
and user space was thinking sendmsg() succeeded since EPIPE is
a positive value, thinking we submitted 32 bytes. Fix it by
negating the sk->sk_err value.
Fixes:
|
||
David S. Miller
|
1ba982806c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-07 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add cgroup local storage for BPF programs, which provides a fast accessible memory for storing various per-cgroup data like number of transmitted packets, etc, from Roman. 2) Support bpf_get_socket_cookie() BPF helper in several more program types that have a full socket available, from Andrey. 3) Significantly improve the performance of perf events which are reported from BPF offload. Also convert a couple of BPF AF_XDP samples overto use libbpf, both from Jakub. 4) seg6local LWT provides the End.DT6 action, which allows to decapsulate an outer IPv6 header containing a Segment Routing Header. Adds this action now to the seg6local BPF interface, from Mathieu. 5) Do not mark dst register as unbounded in MOV64 instruction when both src and dst register are the same, from Arthur. 6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier instructions on arm64 for the AF_XDP sample code, from Brian. 7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts over from Python 2 to Python 3, from Jeremy. 8) Enable BTF build flags to the BPF sample code Makefile, from Taeung. 9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee. 10) Several improvements to the README.rst from the BPF documentation to make it more consistent with RST format, from Tobin. 11) Replace all occurrences of strerror() by calls to strerror_r() in libbpf and fix a FORTIFY_SOURCE build error along with it, from Thomas. 12) Fix a bug in bpftool's get_btf() function to correctly propagate an error via PTR_ERR(), from Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Roman Gushchin
|
85fc4b16aa |
bpf: introduce update_effective_progs()
__cgroup_bpf_attach() and __cgroup_bpf_detach() functions have a good amount of duplicated code, which is possible to eliminate by introducing the update_effective_progs() helper function. The update_effective_progs() calls compute_effective_progs() and then in case of success it calls activate_effective_progs() for each descendant cgroup. In case of failure (OOM), it releases allocated prog arrays and return the error code. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
Thomas Gleixner
|
bc2d8d262c |
cpu/hotplug: Fix SMT supported evaluation
Josh reported that the late SMT evaluation in cpu_smt_state_init() sets
cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied
on the kernel command line as it cannot differentiate between SMT disabled
by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and
makes the sysfs interface unusable.
Rework this so that during bringup of the non boot CPUs the availability of
SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a
'primary' thread then set the local cpu_smt_available marker and evaluate
this explicitely right after the initial SMP bringup has finished.
SMT evaulation on x86 is a trainwreck as the firmware has all the
information _before_ booting the kernel, but there is no interface to query
it.
Fixes:
|
||
Joel Fernandes (Google)
|
da5b3ebb45 |
tracing: irqsoff: Account for additional preempt_disable
Recently we tried to make the preemptirqsoff tracer to use irqsoff tracepoint probes. However this causes issues as reported by Masami: [2.271078] Testing tracer preemptirqsoff: .. no entries found ..FAILED! [2.381015] WARNING: CPU: 0 PID: 1 at /home/mhiramat/ksrc/linux/kernel/ trace/trace.c:1512 run_tracer_selftest+0xf3/0x154 This is due to the tracepoint code increasing the preempt nesting count by calling an additional preempt_disable before calling into the preemptoff tracer which messes up the preempt_count() check in tracer_hardirqs_off. To fix this, make the irqsoff tracer probes balance the additional outer preempt_disable with a preempt_enable_notrace. The other way to fix this is to just use SRCU for all tracepoints. However we can't do that because we can't use NMIs from RCU context. Link: http://lkml.kernel.org/r/20180806034049.67949-1-joel@joelfernandes.org Fixes: |
||
Thomas Gleixner
|
9e90c79852 |
irqchip updates for 4.19
- GICv3 ITS LPI allocation revamp - GICv3 support for hypervisor-enforced LPI range - GICv3 ITS conversion to raw spinlock -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAltoBXMVHG1hcmMuenlu Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDyUYP/1feAq3F7ZmhCIZka4c6y/m4EBpq BjWEEgOAGMEyyB4s98flsRtZcEUxxp6CqEXo2FgCsd1Nj+og7oA7vwOlqy3aGzsi 9f/Z5Wi6SlG06lH5tmYNkyVbGk2tE3s2FzkH5Rg8qZGk+X3OCOdNs/+G20pYAkSp ESePWSapbQUJSExJ1MqzfdHFidtVA1V+ev8BKdIp2ykl1NRae8LJeKHIbqac49Ym JclfCLFpQM1M1ElB9j0E8hAvZhz10oOz7TtBR737O/1QEifVyFqGBckPzldvwIJM zZ+nR+Yzj1ruD109xwaF1iKy9AinZWhiqrtN7UXJ3jwHtNih+sy0R6FQ38GMNoOC 0K02n/qStR5xglGr4BmAcWlOuFtBYWfz6HpSVMqaTWWmOxHEiqS6pXtEA+dV/YyI wHLbo0YzpWTQm6t1+b/PoByAJ0/hOcD1nOD57b+NGjX7tZV0sGjpGsecvFhTSywh BN3COBi9k/FOBrOTGDX1qUAI+mEf76vc2BAC+BkkoiiMg3WlY0E9qfQJguUxHdrb 0LS3lDZoHCNoz8RZLrUyenTT0NYGcjPGUTinMDJWG79VGXOWFexTDdCuX0kF90CK 1Zie3O6lrTYolmaiyLUxwukKp1SVUyoA5IpKVwfDJQYUhEfk27yvlzg2MBMcHDRA uy3QSkmjx9vw/sAu =gKw8 -----END PGP SIGNATURE----- Merge tag 'irqchip-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - GICv3 ITS LPI allocation revamp - GICv3 support for hypervisor-enforced LPI range - GICv3 ITS conversion to raw spinlock |
||
Pingfan Liu
|
55f2503c3b |
PM / reboot: Eliminate race between reboot and suspend
At present, "systemctl suspend" and "shutdown" can run in parrallel. A system can suspend after devices_shutdown(), and resume. Then the shutdown task goes on to power off. This causes many devices are not really shut off. Hence replacing reboot_mutex with system_transition_mutex (renamed from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as system_transition_mutex can be better to reflect the purpose of the mutex. Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Gustavo A. R. Silva
|
82837ad5bd |
PM / hibernate: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This addresses Coverity-ID: 114713 ("Missing break in switch"). Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Rafael J. Wysocki
|
6ccbe1dcdd | Merge back cpufreq changes for 4.19. | ||
Jens Axboe
|
05b9ba4b55 |
Linux 4.18-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76 sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA 1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR 9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2 L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt vJJlibI= =42a5 -----END PGP SIGNATURE----- Merge tag 'v4.18-rc6' into for-4.19/block2 Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a merge conflict down the line. Signed-of-by: Jens Axboe <axboe@kernel.dk> |
||
David S. Miller
|
c1c8626fce |
Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net
Lots of overlapping changes, mostly trivial in nature. The mlxsw conflict was resolving using the example resolution at: https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Prasad Sodagudi
|
cfd355145c |
stop_machine: Atomically queue and wake stopper threads
When cpu_stop_queue_work() releases the lock for the stopper
thread that was queued into its wake queue, preemption is
enabled, which leads to the following deadlock:
CPU0 CPU1
sched_setaffinity(0, ...)
__set_cpus_allowed_ptr()
stop_one_cpu(0, ...) stop_two_cpus(0, 1, ...)
cpu_stop_queue_work(0, ...) cpu_stop_queue_two_works(0, ..., 1, ...)
-grabs lock for migration/0-
-spins with preemption disabled,
waiting for migration/0's lock to be
released-
-adds work items for migration/0
and queues migration/0 to its
wake_q-
-releases lock for migration/0
and preemption is enabled-
-current thread is preempted,
and __set_cpus_allowed_ptr
has changed the thread's
cpu allowed mask to CPU1 only-
-acquires migration/0 and migration/1's
locks-
-adds work for migration/0 but does not
add migration/0 to wake_q, since it is
already in a wake_q-
-adds work for migration/1 and adds
migration/1 to its wake_q-
-releases migration/0 and migration/1's
locks, wakes migration/1, and enables
preemption-
-since migration/1 is requested to run,
migration/1 begins to run and waits on
migration/0, but migration/0 will never
be able to run, since the thread that
can wake it is affine to CPU1-
Disable preemption in cpu_stop_queue_work() before queueing works for
stopper threads, and queueing the stopper thread in the wake queue, to
ensure that the operation of queueing the works and waking the stopper
threads is atomic.
Fixes:
|
||
Linus Torvalds
|
2f3672cbf9 |
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner: "Two oneliners addressing NOHZ failures: - Use a bitmask to check for the pending timer softirq and not the bit number. The existing code using the bit number checked for the wrong bit, which caused timers to either expire late or stop completely. - Make the nohz evaluation on interrupt exit more robust. The existing code did not re-arm the hardware when interrupting a running softirq in task context (ksoftirqd or tail of local_bh_enable()), which caused timers to either expire late or stop completely" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: Fix missing tick reprogram when interrupting an inline softirq nohz: Fix local_timer_softirq_pending() |
||
Thomas Gleixner
|
f2701b77bb |
Merge 4.18-rc7 into master to pick up the KVM dependcy
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
Eric W. Biederman
|
924de3b8c9 |
fork: Have new threads join on-going signal group stops
There are only two signals that are delivered to every member of a signal group: SIGSTOP and SIGKILL. Signal delivery requires every signal appear to be delivered either before or after a clone syscall. SIGKILL terminates the clone so does not need to be considered. Which leaves only SIGSTOP that needs to be considered when creating new threads. Today in the event of a group stop TIF_SIGPENDING will get set and the fork will restart ensuring the fork syscall participates in the group stop. A fork (especially of a process with a lot of memory) is one of the most expensive system so we really only want to restart a fork when necessary. It is easy so check to see if a SIGSTOP is ongoing and have the new thread join it immediate after the clone completes. Making it appear the clone completed happened just before the SIGSTOP. The calculate_sigpending function will see the bits set in jobctl and set TIF_SIGPENDING to ensure the new task takes the slow path to userspace. V2: The call to task_join_group_stop was moved before the new task is added to the thread group list. This should not matter as sighand->siglock is held over both the addition of the threads, the call to task_join_group_stop and do_signal_stop. But the change is trivial and it is one less thing to worry about when reading the code. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
Eric W. Biederman
|
088fe47ce9 |
signal: Add calculate_sigpending()
Add a function calculate_sigpending to test to see if any signals are pending for a new task immediately following fork. Signals have to happen either before or after fork. Today our practice is to push all of the signals to before the fork, but that has the downside that frequent or periodic signals can make fork take much much longer than normal or prevent fork from completing entirely. So we need move signals that we can after the fork to prevent that. This updates the code to set TIF_SIGPENDING on a new task if there are signals or other activities that have moved so that they appear to happen after the fork. As the code today restarts if it sees any such activity this won't immediately have an effect, as there will be no reason for it to set TIF_SIGPENDING immediately after the fork. Adding calculate_sigpending means the code in fork can safely be changed to not always restart if a signal is pending. The new calculate_sigpending function sets sigpending if there are pending bits in jobctl, pending signals, the freezer needs to freeze the new task or the live kernel patching framework need the new thread to take the slow path to userspace. I have verified that setting TIF_SIGPENDING does make a new process take the slow path to userspace before it executes it's first userspace instruction. I have looked at the callers of signal_wake_up and the code paths setting TIF_SIGPENDING and I don't see anything else that needs to be handled. The code probably doesn't need to set TIF_SIGPENDING for the kernel live patching as it uses a separate thread flag as well. But at this point it seems safer reuse the recalc_sigpending logic and get the kernel live patching folks to sort out their story later. V2: I have moved the test into schedule_tail where siglock can be grabbed and recalc_sigpending can be reused directly. Further as the last action of setting up a new task this guarantees that TIF_SIGPENDING will be properly set in the new process. The helper calculate_sigpending takes the siglock and uncontitionally sets TIF_SIGPENDING and let's recalc_sigpending clear TIF_SIGPENDING if it is unnecessary. This allows reusing the existing code and keeps maintenance of the conditions simple. Oleg Nesterov <oleg@redhat.com> suggested the movement and pointed out the need to take siglock if this code was going to be called while the new task is discoverable. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
Frederic Weisbecker
|
0a0e0829f9 |
nohz: Fix missing tick reprogram when interrupting an inline softirq
The full nohz tick is reprogrammed in irq_exit() only if the exit is not in a nesting interrupt. This stands as an optimization: whether a hardirq or a softirq is interrupted, the tick is going to be reprogrammed when necessary at the end of the inner interrupt, with even potential new updates on the timer queue. When soft interrupts are interrupted, it's assumed that they are executing on the tail of an interrupt return. In that case tick_nohz_irq_exit() is called after softirq processing to take care of the tick reprogramming. But the assumption is wrong: softirqs can be processed inline as well, ie: outside of an interrupt, like in a call to local_bh_enable() or from ksoftirqd. Inline softirqs don't reprogram the tick once they are done, as opposed to interrupt tail softirq processing. So if a tick interrupts an inline softirq processing, the next timer will neither be reprogrammed from the interrupting tick's irq_exit() nor after the interrupted softirq processing. This situation may leave the tick unprogrammed while timers are armed. To fix this, simply keep reprogramming the tick even if a softirq has been interrupted. That can be optimized further, but for now correctness is more important. Note that new timers enqueued in nohz_full mode after a softirq gets interrupted will still be handled just fine through self-IPIs triggered by the timer code. Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: stable@vger.kernel.org # 4.14+ Link: https://lkml.kernel.org/r/1533303094-15855-1-git-send-email-frederic@kernel.org |