Calling nvme_sysfs_delete() when the controller is in the middle of
creation may cause several bugs. If the controller is in NEW state we
remove delete_controller file and don't delete the controller. The user
will not be able to use nvme disconnect command on that controller again,
although the controller may be active. Other bugs may happen if the
controller is in the middle of create_ctrl callback and
nvme_do_delete_ctrl() starts. For example, freeing I/O tagset at
nvme_do_delete_ctrl() before it was allocated at create_ctrl callback.
To fix all those races don't allow the user to delete the controller
before it was fully created.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Put the ctrl reference count at nvme_uninit_ctrl as opposed to
nvme_init_ctrl which takes it. This decrease the reference count at the
core layer instead of decreasing it on each transport separately.
Also move the call of nvme_uninit_ctrl at PCI driver after calling to
nvme_release_prp_pools and nvme_dev_unmap, in order to put the reference
count after using the dev. This is safe because those functions use
nvme_dev which is freed only later at nvme_pci_free_ctrl.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In case nvme_sysfs_delete() is called by the user before taking the ctrl
reference count, the ctrl may be freed during the creation and cause the
bug. Take the reference as soon as the controller is externally visible,
which is done by cdev_device_add() in nvme_init_ctrl(). Also take the
reference count at the core layer instead of taking it on each transport
separately.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Destroy the resources in the same order like in nvme_probe error flow to
improve code readability.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The return code of nvme_delete_ctrl_sync is never used, so change it to
void.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Improve code readability.
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
ida instances allocate some internal memory in addition to the base
'struct ida'. Use ida_destroy() to release that memory at module_exit().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently 32 bit application gets ENOTTY when it calls
compat_ioctl with NVME_IOCTL_SUBMIT_IO in 64 bit kernel.
The cause is that the results of sizeof(struct nvme_user_io),
which is used to define NVME_IOCTL_SUBMIT_IO,
are not same between 32 bit compiler and 64 bit compiler.
* 32 bit: the result of sizeof nvme_user_io is 44.
* 64 bit: the result of sizeof nvme_user_io is 48.
64 bit compiler seems to add 32 bit padding for multiple of 8 bytes.
This patch adds a compat_ioctl handler.
The handler replaces NVME_IOCTL_SUBMIT_IO32 with NVME_IOCTL_SUBMIT_IO
in case 32 bit application calls compat_ioctl for submit in 64 bit kernel.
Then, it calls nvme_ioctl as usual.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada (KIOXIA) <masahiro31.yamada@kioxia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If we have a 4-byte data digest to send to the wire, but we
have more data to send, set MSG_MORE to tell the stack
that more is coming.
Reviewed-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The nvme multipath error handling defaults to controller reset if the
error is unknown. There are, however, no existing nvme status codes that
indicate a reset should be used, and resetting causes unnecessary
disruption to the rest of IO.
Change nvme's error handling to first check if failover should happen.
If not, let the normal error handling take over rather than reset the
controller.
Based-on-a-patch-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Current nvmet-rdma code allocates MR pool budget based on queue size,
assuming both host and target use the same "max_pages_per_mr" count.
After limiting the mdts value for RDMA controllers, we know the factor
of maximum MR's per IO operation. Thus, make sure MR pool will be
sufficient for the required IO depth and IO size.
That is, say host's SQ size is 100, then the MR pool budget allocated
currently at target will also be 100 MRs. But 100 IO WRITE Requests
with 256 sg_count(IO size above 1MB) require 200 MRs when target's
"max_pages_per_mr" is 128.
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Set the maximal data transfer size to be 1MB (currently mdts is
unlimited). This will allow calculating the amount of MR's that
one ctrl should allocate to fulfill it's capabilities.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Some transports, such as RDMA, would like to set the Maximum Data
Transfer Size (MDTS) according to device/port/ctrl characteristics.
This will enable the transport to set the optimal MDTS according to
controller needs and device capabilities. Add a new nvmet transport
op that is called during ctrl identification. This will not effect
transports that don't implement this option. The return value of the new
op is according to the NVMe spec definition for MDTS.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
If we failed to receive data from the socket, don't try
to further process it, we will for sure be handling a queue
error at this point. While no issue was seen with the
current behavior thus far, its safer to cease socket processing
if we detected an error.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Consolidate the request failure handling code to where
it is being fetched (nvme_tcp_try_send).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
MAXH2CDATA is not zero based. Also no reason to limit ourselves to
1M transfers as we can do more easily. Make this an arbitrary limit
of 16M.
Reported-by: Wenhua Liu <liuw@vmware.com>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, queue io_cpu assignment is done sequentially for default,
read and poll queues based on queue id. This causes miss-alignment between
context of CPU initiating I/O and the I/O worker thread processing
queued requests or completions.
Change to modify queue io_cpu assignment to take into account queue
maps offset. Each queue io_cpu will start at zero for each queue map.
This essentially aligns read/poll queues to start over the same range as
default queues.
Testing performed by Mark with:
- ram device (nvmet)
- single CPU core (pinned)
- 100% 4k reads
- engine io_uring (not using sq_thread option)
- hipri flag set
Micro-benchmark results show a net gain of:
- increase of 18%-29% in IOPs
- reduction of 16%-22% in average latency
- reduction of 7%-23% in 99.99% latency
Baseline:
========
QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us]
-----------------------------------------------------------------
1/1 | 32.4 | 30.11 | 50.94
32/8 | 179 | 168.20 | 371
CPU alignment:
=============
QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us]
-----------------------------------------------------------------
1/1 | 38.5 | 25.18 | 39.16
32/8 | 231 | 130.75 | 343
Reported-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The timeout handler can use the existing nvme_poll() if it needs to
check a polled queue, allowing nvme_poll_irqdisable() to handle only
irq driven queues for the remaining callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Completion handling had been done in two steps: find all new completions
under a lock, then handle those completions outside the lock. This was
done to make the locked section as short as possible so that other
threads using the same lock wait less time.
The driver no longer shares locks during completion, and is in fact
lockless for interrupt driven queues, so the optimization no longer
serves its original purpose. Replace the two-pass completion queue
handler with a single pass that completes entries immediately.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The only user for tagged completion was for timeout handling. That user,
though, really only cares if the timed out command is completed, which
we can safely check within the timeout handler.
Remove the tag check to simplify completion handling.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For set feature command when setting up NVME_FEAT_NUM_QUEUES, check
Number of I/O Completion Queues Requested (NCQR) and Number of I/O
Submission Queues Requested (NSQR) before we proceed, for invalid values
(i.e. 65535) return an appropriate NVMe invalid field status.
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
After initialization, nvme_wait_ready checks for readiness every 100ms,
even though the drive may be ready far sooner than that. This delays
system boot by hundreds of milliseconds. Reduce the delay, checking for
readiness every millisecond instead.
Boot-time tests on an AWS c5.12xlarge:
Before:
[ 0.546936] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs
...
[ 0.764178] nvme nvme0: 2/0/0 default/read/poll queues
[ 0.768424] nvme0n1: p1
[ 0.774132] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.774146] VFS: Mounted root (ext4 filesystem) on device 259:1.
...
[ 0.788141] Run /sbin/init as init process
After:
[ 0.537088] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs
...
[ 0.543457] nvme nvme0: 2/0/0 default/read/poll queues
[ 0.548473] nvme0n1: p1
[ 0.554339] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.554344] VFS: Mounted root (ext4 filesystem) on device 259:1.
...
[ 0.567931] Run /sbin/init as init process
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Log the controller status to know more about issue if it
lies within kernel nvme subsytem or controller is unhealthy.
Signed-off-by: Rupesh Girase <rgirase@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulakrni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The function nvme_identify_ns_desc() has 3 levels of nesting which make
error message to exceeded > 80 char per line which is not aligned with
the kernel code standards and rest of the NVMe subsystem code.
Add a helper function to move the processing of the log when the
command is successful by reducing the nesting and keeping the
code < 80 char per line.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
I see no good reason for the "If unsure, say N" advice in the description
of the NVME_HWMON configuration option. It is not dangerous, it does
not select any other option, and has a fairly low overhead.
As the option is already not enabled by default, further suggesting
hesitant users to not enable it is not useful anyway. Unlike some other
options where the description alone may not be sufficient for users to
make a decision, NVME_HWMON is pretty simple to grasp in my opinion,
so just let the user do what they want.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We allow userspace to connect with a custom hostid which is useful for
certain use-cases. However there is is no way to tell what is the hostid
used to connect to a given controller.
Expose this so userspace can correlate controllers based on hostid.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We allow userspace to connect with a custom hostnqn which is useful for
certain use-cases. However there is no way to tell what is the hostnqn
used to connect to a given controller.
Expose this so userspace can correlate controllers based on hostnqn.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we send PDU data, we want to optimize the tcp stack
operation if we have more data to send. So when we set MSG_MORE
when:
- We have more fragments coming in the batch, or
- We have a more data to send in this PDU
- We don't have a data digest trailer
- We optimize with the SUCCESS flag and omit the NVMe completion
(used if sq_head pointer update is disabled)
This addresses a regression in QD=1 with SUCCESS flag optimization
as we unconditionally set MSG_MORE when we didn't actually have
more data to send.
Fixes: 7058329538 ("nvmet-tcp: implement C2HData SUCCESS optimization")
Reported-by: Mark Wunderlich <mark.wunderlich@intel.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Move the get_unaligned_be24(), get_unaligned_le24() and
put_unaligned_le24() definitions from various drivers into
include/linux/unaligned/generic.h. Add a put_unaligned_be24()
implementation.
Link: https://lore.kernel.org/r/20200313203102.16613-4-bvanassche@acm.org
Cc: Keith Busch <kbusch@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jens Axboe <axboe@fb.com>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # For drivers/usb
Reviewed-by: Felipe Balbi <balbi@kernel.org> # For drivers/usb/gadget
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The timeout of identify cmd, which is invoked as part of admin queue
creation, can result in freeing of async event data both in
nvme_rdma_timeout handler and error handling path of
nvme_rdma_configure_admin queue thus causing NULL pointer reference.
Call Trace:
? nvme_rdma_setup_ctrl+0x223/0x800 [nvme_rdma]
nvme_rdma_create_ctrl+0x2ba/0x3f7 [nvme_rdma]
nvmf_dev_write+0xa54/0xcc6 [nvme_fabrics]
__vfs_write+0x1b/0x40
vfs_write+0xb2/0x1b0
ksys_write+0x61/0xd0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reviewed-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Enable ability to associate all sockets related to NVMf TCP traffic
to a priority group that will perform optimized network processing for
this traffic class. Maintain initial default behavior of using priority
of zero.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Enable ability to associate all sockets related to NVMf TCP traffic
to a priority group that will perform optimized network processing for
this traffic class. Maintain initial default behavior of using priority
of zero.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
For nvmet in configfs.c we check return values for all the sscanf()
calls. Add similar check into the nvmet_subsys_attr_serial_store().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patch adds a new target subsys attribute which allows user to
optionally specify model name which then used in the
nvmet_execute_identify_ctrl() to fill up the nvme_id_ctrl structure.
The default value for the model is set to "Linux" for backward
compatibility.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Mark Ruijter <MRuijter@onestopsystems.com>
[chaitanya.kulkarni@wdc.com
*Use macro for default model, coding style fixes.
*Use RCU for accessing model in for configfs and in
nvmet_execute_identify_ctrl().
]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patch adds a new target subsys attribute which allows user to
optionally specify target controller IDs which then used in the
nvmet_execute_identify_ctrl() to fill up the nvme_id_ctrl structure.
For example, when using a cluster setup with two nodes, with a dual
ported NVMe drive and exporting the drive from both the nodes,
The connection to the host fails due to the same controller ID and
results in the following error message:-
"nvme nvmeX: Duplicate cntlid XXX with nvmeX, rejecting"
With this patch now user can partition the controller IDs for each
subsystem by setting up the cntlid_min and cntlid_max. These values
will be used at the time of the controller ID creation. By partitioning
the ctrl-ids for each subsystem results in the unique ctrl-id space
which avoids the collision.
When new attribute is not specified target will fall back to original
cntlid calculation method.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This is a pure code cleanup patch which does not change any
functionality. This patch removes the extra lines, get rid of
else which is duplicate for return.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The return code of nvme_alloc_ns is never used, so change it
to void.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.
Fixes: dabcefab45 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=s3i8
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just a set of NVMe fixes via Keith"
* tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block:
nvme-multipath: Fix memory leak with ana_log_buf
nvme: Fix uninitialized-variable warning
nvme-pci: Use single IRQ vector for old Apple models
nvme/pci: Add sleep quirk for Samsung and Toshiba drives
kmemleak reports a memory leak with the ana_log_buf allocated by
nvme_mpath_init():
unreferenced object 0xffff888120e94000 (size 8208):
comm "nvme", pid 6884, jiffies 4295020435 (age 78786.312s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e2360188>] kmalloc_order+0x97/0xc0
[<0000000079b18dd4>] kmalloc_order_trace+0x24/0x100
[<00000000f50c0406>] __kmalloc+0x24c/0x2d0
[<00000000f31a10b9>] nvme_mpath_init+0x23c/0x2b0
[<000000005802589e>] nvme_init_identify+0x75f/0x1600
[<0000000058ef911b>] nvme_loop_configure_admin_queue+0x26d/0x280
[<00000000673774b9>] nvme_loop_create_ctrl+0x2a7/0x710
[<00000000f1c7a233>] nvmf_dev_write+0xc66/0x10b9
[<000000004199f8d0>] __vfs_write+0x50/0xa0
[<0000000065466fef>] vfs_write+0xf3/0x280
[<00000000b0db9a8b>] ksys_write+0xc6/0x160
[<0000000082156b91>] __x64_sys_write+0x43/0x50
[<00000000c34fbb6d>] do_syscall_64+0x77/0x2f0
[<00000000bbc574c9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
nvme_mpath_init() is called by nvme_init_identify() which is called in
multiple places (nvme_reset_work(), nvme_passthru_end(), etc). This
means nvme_mpath_init() may be called multiple times before
nvme_mpath_uninit() (which is only called on nvme_free_ctrl()).
When nvme_mpath_init() is called multiple times, it overwrites the
ana_log_buf pointer with a new allocation, thus leaking the previous
allocation.
To fix this, free ana_log_buf before allocating a new one.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
gcc may detect a false positive on nvme using an unintialized variable
if setting features fails. Since this is not a fast path, explicitly
initialize this variable to suppress the warning.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
People reported that old Apple machines are not working properly
if the non-first IRQ vector is in use.
Set quirk for that models to limit IRQ to use first vector only.
Based on original patch by GitHub user npx001.
Link: https://github.com/Dunedan/mbp-2016-linux/issues/9
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The Samsung SSD SM981/PM981 and Toshiba SSD KBG40ZNT256G on the Lenovo
C640 platform experience runtime resume issues when the SSDs are kept in
sleep/suspend mode for long time.
This patch applies the 'Simple Suspend' quirk to these configurations.
With this patch, the issue had not been observed in a 1+ day test.
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shyjumon N <shyjumon.n@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jy10
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Not a lot here, which is great, basically just three small bcache
fixes from Coly, and four NVMe fixes via Keith"
* tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block:
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
bcache: remove macro nr_to_fifo_front()
bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"
bcache: ignore pending signals when creating gc and allocator thread
nvme fw-activate operation will get bellow warning log,
fix it by update the parameter order
[ 113.231513] nvme nvme0: Get FW SLOT INFO log error
Fixes: 0e98719b0e ("nvme: simplify the API for getting log pages")
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Reviewed-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many users have reported nvme triggered irq_startup() warnings during
shutdown. The driver uses the nvme queue's irq to synchronize scanning
for completions, and enabling an interrupt affined to only offline CPUs
triggers the alarming warning.
Move the final CQE check to after disabling the device and all
registered interrupts have been torn down so that we do not have any
IRQ to synchronize.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206509
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Delayed keep alive work is queued on system workqueue and may be cancelled
via nvme_stop_keep_alive from nvme_reset_wq, nvme_fc_wq or nvme_wq.
Check_flush_dependency detects mismatched attributes between the work-queue
context used to cancel the keep alive work and system-wq. Specifically
system-wq does not have the WQ_MEM_RECLAIM flag, whereas the contexts used
to cancel keep alive work have WQ_MEM_RECLAIM flag.
Example warning:
workqueue: WQ_MEM_RECLAIM nvme-reset-wq:nvme_fc_reset_ctrl_work [nvme_fc]
is flushing !WQ_MEM_RECLAIM events:nvme_keep_alive_work [nvme_core]
To avoid the flags mismatch, delayed keep alive work is queued on nvme_wq.
However this creates a secondary concern where work and a request to cancel
that work may be in the same work queue - namely err_work in the rdma and
tcp transports, which will want to flush/cancel the keep alive work which
will now be on nvme_wq.
After reviewing the transports, it looks like err_work can be moved to
nvme_reset_wq. In fact that aligns them better with transition into
RESETTING and performing related reset work in nvme_reset_wq.
Change nvme-rdma and nvme-tcp to perform err_work in nvme_reset_wq.
Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When nvme_tcp_io_work() fails to send to socket due to
connection close/reset, error_recovery work is triggered
from nvme_tcp_state_change() socket callback.
This cancels all the active requests in the tagset,
which requeues them.
The failed request, however, was ended and thus requeued
individually as well unless send returned -EPIPE.
Another return code to be treated the same way is -ECONNRESET.
Double requeue caused BUG_ON(blk_queued_rq(rq))
in blk_mq_requeue_request() from either the individual requeue
of the failed request or the bulk requeue from
blk_mq_tagset_busy_iter(, nvme_cancel_request, );
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=05d8
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later arrivals, but all fixes at this point:
- bcache fix series (Coly)
- Series of BFQ fixes (Paolo)
- NVMe pull request from Keith with a few minor NVMe fixes
- Various little tweaks"
* tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits)
nvmet: update AEN list and array at one place
nvmet: Fix controller use after free
nvmet: Fix error print message at nvmet_install_queue function
brd: check and limit max_part par
nvme-pci: remove nvmeq->tags
nvmet: fix dsm failure when payload does not match sgl descriptor
nvmet: Pass lockdep expression to RCU lists
block, bfq: clarify the goal of bfq_split_bfqq()
block, bfq: get a ref to a group when adding it to a service tree
block, bfq: remove ifdefs from around gets/puts of bfq groups
block, bfq: extend incomplete name of field on_st
block, bfq: get extra ref to prevent a queue from being freed during a group move
block, bfq: do not insert oom queue into position tree
block, bfq: do not plug I/O for bfq_queues with no proc refs
bcache: check return value of prio_read()
bcache: fix incorrect data type usage in btree_flush_write()
bcache: add readahead cache policy options via sysfs interface
bcache: explicity type cast in bset_bkey_last()
bcache: fix memory corruption in bch_cache_accounting_clear()
xen/blkfront: limit allocated memory size to actual use case
...
All async events are enqueued via nvmet_add_async_event() which
updates the ctrl->async_event_cmds[] array and additionally an struct
nvmet_async_event is added to the ctrl->async_events list.
Under normal operations the nvmet_async_event_work() updates again
the ctrl->async_event_cmds and removes the corresponding struct
nvmet_async_event from the list again. Though nvmet_sq_destroy() could
be called which calls nvmet_async_events_free() which only updates the
ctrl->async_event_cmds[] array.
Add new functions nvmet_async_events_process() and
nvmet_async_events_free() to process async events, update an array and
the list.
When we destroy submission queue after clearing the aen present on
the ctrl->async list we also loop over ctrl->async_event_cmds[] for
any requests posted by the host for which we don't have the AEN in
the ctrl->async_events list by calling nvmet_async_event_process()
and nvmet_async_events_free().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
[chaitanya.kulkarni@wdc.com
* Loop over and clear out outstanding requests
* Update changelog
]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
After nvmet_install_queue() sets sq->ctrl calling to nvmet_sq_destroy()
reduces the controller refcount. In case nvmet_install_queue() fails,
calling to nvmet_ctrl_put() is done twice (at nvmet_sq_destroy and
nvmet_execute_io_connect/nvmet_execute_admin_connect) instead of once for
the queue which leads to use after free of the controller. Fix this by set
NULL at sq->ctrl in case of a failure at nvmet_install_queue().
The bug leads to the following Call Trace:
[65857.994862] refcount_t: underflow; use-after-free.
[65858.108304] Workqueue: events nvmet_rdma_release_queue_work [nvmet_rdma]
[65858.115557] RIP: 0010:refcount_warn_saturate+0xe5/0xf0
[65858.208141] Call Trace:
[65858.211203] nvmet_sq_destroy+0xe1/0xf0 [nvmet]
[65858.216383] nvmet_rdma_release_queue_work+0x37/0xf0 [nvmet_rdma]
[65858.223117] process_one_work+0x167/0x370
[65858.227776] worker_thread+0x49/0x3e0
[65858.232089] kthread+0xf5/0x130
[65858.235895] ? max_active_store+0x80/0x80
[65858.240504] ? kthread_bind+0x10/0x10
[65858.244832] ret_from_fork+0x1f/0x30
[65858.249074] ---[ end trace f82d59250b54beb7 ]---
Fixes: bb1cc74790 ("nvmet: implement valid sqhd values in completions")
Fixes: 1672ddb8d6 ("nvmet: Add install_queue callout")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Place the arguments in the correct order.
Fixes: 1672ddb8d6 ("nvmet: Add install_queue callout")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There is no real need to have a pointer to the tagset in
struct nvme_queue, as we only need it in a single place, and that place
can derive the used tagset from the device and qid trivially. This
fixes a problem with stale pointer exposure when tagsets are reset,
and also shrinks the nvme_queue structure. It also matches what most
other transports have done since day 1.
Reported-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The host is allowed to pass the controller an sgl describing a buffer
that is larger than the dsm payload itself, allow it when executing
dsm.
Reported-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>,
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
ctrl->subsys->namespaces and subsys->namespaces are traversed with
list_for_each_entry_rcu outside an RCU read-side critical section but
under the protection of ctrl->subsys->lock and subsys->lock respectively.
Hence, add the corresponding lockdep expression to the list traversal
primitive to silence false-positive lockdep warnings, and harden RCU
lists.
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yJZi
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/block-2020-01-27' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"This may be the most quiet round we've had in years. I'm not
complaining. Really not a lot to detail here, outside of spelling and
documentation improvements/fixes, we have:
- Allow t10-pi to be modular (Herbert)
- Remove dead code in bfq (Alex)
- Mark zone management requests with REQ_SYNC (Chaitanya)
- BFQ division improvement (Wen)
- Small series improving plugging (Pavel)"
* tag 'for-5.6/block-2020-01-27' of git://git.kernel.dk/linux-block:
partitions/ldm: fix spelling mistake "to" -> "too"
block, bfq: improve arithmetic division in bfq_delta()
block/bfq: remove unused bfq_class_rt which never used
block: mark zone-mgmt bios with REQ_SYNC
blk-mq: Document functions for sending request
block: Allow t10-pi to be modular
blk-mq: optimise blk_mq_flush_plug_list()
list: introduce list_for_each_continue()
blk-mq: optimise rq sort function
The existing implementation for the get_feature admin-cmd does not
use per-feature data len. This patch introduces a new helper function
nvmet_feat_data_len(), which is used to calculate per feature data len.
Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID).
Fixes: commit e9061c3978 ("nvmet: Remove the data_len field from the nvmet_req struct")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amit Engel <amit.engel@dell.com>
[endiness, naming, and kernel style fixes]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Decode interrupted command and not ready namespace nvme status codes to
BLK_STS_TARGET. These are not generic IO errors and should use a non-path
specific error so that it can use the non-failover retry path.
Reported-by: John Meneghini <John.Meneghini@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently t10-pi can only be built into the block layer which via
crc-t10dif pulls in a whole chunk of the Crypto API. In fact all
users of t10-pi work as modules and there is no reason for it to
always be built-in.
This patch adds a new hidden option for t10-pi that is selected
automatically based on BLK_DEV_INTEGRITY and whether the users
of t10-pi are built-in or not.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=hmxJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191212' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- stable fix for the bi_size overflow. Not a corruption issue, but a
case wher we could merge but disallowed (Andreas)
- NVMe pull request via Keith, with various fixes.
- MD pull request from Song.
- Merge window regression fix for the rq passthrough stats (Logan)
- Remove unused blkcg_drain_queue() function (Guoqing)
* tag 'for-linus-20191212' of git://git.kernel.dk/linux-block:
blk-cgroup: remove blkcg_drain_queue
block: fix NULL pointer dereference in account statistics with IDE
md: make sure desc_nr less than MD_SB_DISKS
md: raid1: check rdev before reference in raid1_sync_request func
raid5: need to set STRIPE_HANDLE for batch head
block: fix "check bi_size overflow before merge"
nvme/pci: Fix read queue count
nvme/pci Limit write queue sizes to possible cpus
nvme/pci: Fix write and poll queue types
nvme/pci: Remove last_cq_head
nvme: Namepace identification descriptor list is optional
nvme-fc: fix double-free scenarios on hw queues
nvme: else following return is not needed
nvme: add error message on mismatching controller ids
nvme_fc: add module to ops template to allow module references
nvmet-loop: Avoid preallocating big SGL for data
nvme-fc: Avoid preallocating big SGL for data
nvme-rdma: Avoid preallocating big SGL for data
Pull NVMe fixes from Keith
* 'nvme/for-5.5' of git://git.infradead.org/nvme:
nvme/pci: Fix read queue count
nvme/pci Limit write queue sizes to possible cpus
nvme/pci: Fix write and poll queue types
nvme/pci: Remove last_cq_head
nvme: Namepace identification descriptor list is optional
nvme-fc: fix double-free scenarios on hw queues
nvme: else following return is not needed
nvme: add error message on mismatching controller ids
nvme_fc: add module to ops template to allow module references
nvmet-loop: Avoid preallocating big SGL for data
nvme-fc: Avoid preallocating big SGL for data
nvme-rdma: Avoid preallocating big SGL for data
If nvme.write_queues equals the number of CPUs, the driver had decreased
the number of interrupts available such that there could only be one read
queue even if the controller could support more. Remove the interrupt
count reduction in this case. The driver wouldn't request more IRQs than
it wants queues anyway.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The driver can never use more queues of any type than the number of
possible CPUs, so a higher value causes the driver to allocate more
memory for IO queues than it could ever use. Limit the parameter at
module load time to the number of possible cpus.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The number of poll or write queues should never be negative. Use unsigned
types so that it's not possible to break have the driver not allocate
any queues.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uUXw
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
We had been saving the last_cq_head seen from an interrupt so that a
polled queue wouldn't mistakenly trigger spruious interrupt detection. We
don't poll interrupt driven queues any more, so saving this value is
pointless.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Despite NVM Express specification 1.3 requires a controller claiming to
be 1.3 or higher implement Identify CNS 03h (Namespace Identification
Descriptor list), the driver doesn't really need this identification in
order to use a namespace. The code had already documented in comments
that we're not to consider an error to this command.
Return success if the controller provided any response to an
namespace identification descriptors command.
Fixes: 538af88ea7 ("nvme: make nvme_report_ns_ids propagate error back")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205679
Reported-by: Ingo Brunberg <ingo_brunberg@web.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: stable@vger.kernel.org # 5.4+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
If an error occurs on one of the ios used for creating an
association, the creating routine has error paths that are
invoked by the command failure and the error paths will free
up the controller resources created to that point.
But... the io was ultimately determined by an asynchronous
completion routine that detected the error and which
unconditionally invokes the error_recovery path which calls
delete_association. Delete association deletes all outstanding
io then tears down the controller resources. So the
create_association thread can be running in parallel with
the error_recovery thread. What was seen was the LLDD received
a call to delete a queue, causing the LLDD to do a free of a
resource, then the transport called the delete queue again
causing the driver to repeat the free call. The second free
routine corrupted the allocator. The transport shouldn't be
making the duplicate call, and the delete queue is just one
of the resources being freed.
To fix, it is realized that the create_association path is
completely serialized with one command at a time. So the
failed io completion will always be seen by the create_association
path and as of the failure, there are no ios to terminate and there
is no reason to be manipulating queue freeze states, etc.
The serialized condition stays true until the controller is
transitioned to the LIVE state. Thus the fix is to change the
error recovery path to check the controller state and only
invoke the teardown path if not already in the CONNECTING state.
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Remove unnecessary keyword in nvme_create_queue().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We've seen a few devices that return different controller id's to
the Fabric Connect command vs the Identify(controller) command. It's
currently hard to identify this failure by existing error messages. It
comes across as a (re)connect attempt in the transport that fails with
a -22 (-EINVAL) status. The issue is compounded by older kernels not
having the controller id check or had the identify command overwrite the
fabrics controller id value before it checked. Both resulted in cases
where the devices appeared fine until more recent kernels.
Clarify the reject by adding an error message on controller id mismatches.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In nvme-fc: it's possible to have connected active controllers
and as no references are taken on the LLDD, the LLDD can be
unloaded. The controller would enter a reconnect state and as
long as the LLDD resumed within the reconnect timeout, the
controller would resume. But if a namespace on the controller
is the root device, allowing the driver to unload can be problematic.
To reload the driver, it may require new io to the boot device,
and as it's no longer connected we get into a catch-22 that
eventually fails, and the system locks up.
Fix this issue by taking a module reference for every connected
controller (which is what the core layer did to the transport
module). Reference is cleared when the controller is removed.
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_loop_create_io_queues() preallocates a big buffer for the IO SGL based
on SG_CHUNK_SIZE.
Modern DMA engines are often capable of dealing with very big segments so
the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB
SGL allocation per command.
If a controller has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For nvmet-loop, nr_hw_queues can be
128 and each queue's depth 128. This means the resulting preallocation
for the data SGL is 128*128*4K = 64MB per controller.
Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for NVMeOF as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.
Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_fc_create_io_queues() preallocates a big buffer for the IO SGL based
on SG_CHUNK_SIZE.
Modern DMA engines are often capable of dealing with very big segments so
the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB
SGL allocation per command.
If a controller has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For nvme-fc, nr_hw_queues can be
128 and each queue's depth 128. This means the resulting preallocation
for the data SGL is 128*128*4K = 64MB per controller.
Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for NVMeOF as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_rdma_alloc_tagset() preallocates a big buffer for the IO SGL based
on SG_CHUNK_SIZE.
Modern DMA engines are often capable of dealing with very big segments so
the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB
SGL allocation per command.
If a controller has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For nvme-rdma, nr_hw_queues can be
128 and each queue's depth 128. This means the resulting preallocation
for the data SGL is 128*128*4K = 64MB per controller.
Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for NVMeOF as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.
We didn't notice of a performance degradation, since for small IOs we'll
use the inline SG and for the bigger IOs the allocation of a bigger SGL
from slab is fast enough.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oyE3
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block
Pull additional block driver updates from Jens Axboe:
"Here's another block driver update, done to avoid conflicts with the
zoned changes coming next.
This contains:
- Prepare SCSI sd for zone open/close/finish support
- Small NVMe pull request
- hwmon support (Akinobu)
- add new co-maintainer (Christoph)
- work-around for a discard issue on non-conformant drives
(Eduard)
- Small nbd leak fix"
* tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block:
nbd: prevent memory leak
nvme: hwmon: add quirk to avoid changing temperature threshold
nvme: hwmon: provide temperature min and max values for each sensor
nvmet: add another maintainer
nvme: Discard workaround for non-conformant devices
nvme: Add hardware monitoring support
scsi: sd_zbc: add zone open, close, and finish support
-----BEGIN PGP SIGNATURE-----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=i0jf
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the main block driver updates for 5.5. Nothing major in here,
mostly just fixes. This contains:
- a set of bcache changes via Coly
- MD changes from Song
- loop unmap write-zeroes fix (Darrick)
- spelling fixes (Geert)
- zoned additions cleanups to null_blk/dm (Ajay)
- allow null_blk online submit queue changes (Bart)
- NVMe changes via Keith, nothing major here either"
* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
bcache: don't export symbols
bcache: remove the extra cflags for request.o
bcache: at least try to shrink 1 node in bch_mca_scan()
bcache: add idle_max_writeback_rate sysfs interface
bcache: add code comments in bch_btree_leaf_dirty()
bcache: fix deadlock in bcache_allocator
bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
bcache: deleted code comments for dead code in bch_data_insert_keys()
bcache: add more accurate error messages in read_super()
bcache: fix static checker warning in bcache_device_free()
bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
bcache: fix fifo index swapping condition in journal_pin_cmp()
md/raid10: prevent access of uninitialized resync_pages offset
md: avoid invalid memory access for array sb->dev_roles
md/raid1: avoid soft lockup under high load
null_blk: add zone open, close, and finish support
dm: add zone open, close and finish support
...
This adds a new quirk NVME_QUIRK_NO_TEMP_THRESH_CHANGE to avoid changing
the value of the temperature threshold feature for specific devices that
show undesirable behavior.
Guenter reported:
"On my Intel NVME drive (SSDPEKKW512G7), writing any minimum limit on the
Composite temperature sensor results in a temperature warning, and that
warning is sticky until I reset the controller.
It doesn't seem to matter which temperature I write; writing -273000 has
the same result."
The Intel NVMe has the latest firmware version installed, so this isn't
a problem that was ever fixed.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jean Delvare <jdelvare@suse.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
According to the NVMe specification, the over temperature threshold and
under temperature threshold features shall be implemented for Composite
Temperature if a non-zero WCTEMP field value is reported in the Identify
Controller data structure. The features are also implemented for all
implemented temperature sensors (i.e., all Temperature Sensor fields that
report a non-zero value).
This provides the over temperature threshold and under temperature
threshold for each sensor as temperature min and max values of hwmon
sysfs attributes.
The WCTEMP is already provided as a temperature max value for Composite
Temperature, but this change isn't incompatible. Because the default
value of the over temperature threshold for Composite Temperature is
the WCTEMP.
Now the alarm attribute for Composite Temperature indicates one of the
temperature is outside of a temperature threshold. Because there is only
a single bit in Critical Warning field that indicates a temperature is
outside of a threshold.
Example output from the "sensors" command:
nvme-pci-0100
Adapter: PCI adapter
Composite: +33.9°C (low = -273.1°C, high = +69.8°C)
(crit = +79.8°C)
Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C)
This also adds helper macros for kelvin from/to milli Celsius conversion,
and replaces the repeated code in hwmon.c.
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jean Delvare <jdelvare@suse.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Users observe IOMMU related errors when performing discard on nvme from
non-compliant nvme devices reading beyond the end of the DMA mapped
ranges to discard.
Two different variants of this behavior have been observed: SM22XX
controllers round up the read size to a multiple of 512 bytes, and Phison
E12 unconditionally reads the maximum discard size allowed by the spec
(256 segments or 4kB).
Make nvme_setup_discard unconditionally allocate the maximum DSM buffer
so the driver DMA maps a memory range that will always succeed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202665 many
Signed-off-by: Eduard Hasenleithner <eduard@hasenleithner.at>
[changelog, use existing define, kernel coding style]
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme devices report temperature information in the controller information
(for limits) and in the smart log. Currently, the only means to retrieve
this information is the nvme command line interface, which requires
super-user privileges.
At the same time, it would be desirable to be able to use NVMe temperature
information for thermal control.
This patch adds support to read NVMe temperatures from the kernel using the
hwmon API and adds temperature zones for NVMe drives. The thermal subsystem
can use this information to set thermal policies, and userspace can access
it using libsensors and/or the "sensors" command.
Example output from the "sensors" command:
nvme0-pci-0100
Adapter: PCI adapter
Composite: +39.0°C (high = +85.0°C, crit = +85.0°C)
Sensor 1: +39.0°C
Sensor 2: +41.0°C
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8B/z
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
nvme_mpath_clear_ctrl_paths() iterates through
the ctrl->namespaces list while holding ctrl->scan_lock.
This does not seem to be the correct way of protecting
from concurrent list modification.
Specifically, nvme_scan_work() sorts ctrl->namespaces
AFTER unlocking scan_lock.
This may result in the following (rare) crash in ctrl disconnect
during scan_work:
BUG: kernel NULL pointer dereference, address: 0000000000000050
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic
RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core]
...
Call Trace:
nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core]
nvme_remove_namespaces+0x35/0xe0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x90 [nvme_core]
nvme_sysfs_delete+0x49/0x60 [nvme_core]
dev_attr_store+0x17/0x30
sysfs_kf_write+0x3e/0x50
kernfs_fop_write+0x11e/0x1a0
__vfs_write+0x1b/0x40
vfs_write+0xb9/0x1a0
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8d02bfb154
Fix:
After taking scan_lock in nvme_mpath_clear_ctrl_paths()
down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe.
This will not cause deadlocks because taking scan_lock never happens
while holding the namespaces_rwsem.
Moreover, scan work downs namespaces_rwsem in the same order.
Alternative: sort ctrl->namespaces in nvme_scan_work()
while still holding the scan_lock.
This would leave nvme_mpath_clear_ctrl_paths() without correct protection
against ctrl->namespaces modification by anyone other than scan_work.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In case there are controllers that are not associated with any RDMA
device (e.g. during unsuccessful reconnection) and the user will unload
the module, these controllers will not be freed and will access already
freed memory. The same logic appears in other fabric drivers as well.
Fixes: 87fd125344 ("nvme-rdma: remove redundant reference between ib_device and tagset")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Check validity of offset into ANA log buffer before accessing
nvme_ana_group_desc. This check ensures the size of ANA log buffer >=
offset + sizeof(nvme_ana_group_desc)
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_set_op_attrs has been long deprecated, replace it with a direct
assignment of the flags to bio->bi_opf.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With reference to the following issue reported on the mailing list :-
http://lists.infradead.org/pipermail/linux-nvme/2019-October/027604.html
this patch adds plugging for the bdev-ns under nvmet_bdev_execute_rw().
We can see the following performance improvement in random write
workload I/Os with the setup described in the link when device_path
configured as /dev/md0.
Without this patch :-
write: IOPS=40.8k, BW=159MiB/s (167MB/s)(4777MiB/30002msec)
write: IOPS=41.2k, BW=161MiB/s (169MB/s)(4831MiB/30011msec)
slat (usec): min=8, max=10823, avg=15.64, stdev=16.85
slat (usec): min=8, max=401, avg=15.40, stdev= 9.56
clat (usec): min=54, max=2492, avg=759.07, stdev=172.62
clat (usec): min=56, max=1997, avg=768.06, stdev=178.72
With this patch :-
write: IOPS=123k, BW=480MiB/s (504MB/s)(14.1GiB/30011msec)
write: IOPS=123k, BW=481MiB/s (504MB/s)(14.1GiB/30002msec)
slat (usec): min=8, max=9941, avg=13.31, stdev= 8.04
slat (usec): min=8, max=289, avg=13.31, stdev= 3.37
clat (usec): min=43, max=17635, avg=245.46, stdev=171.23
clat (usec): min=44, max=17751, avg=245.25, stdev=183.14
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the special cases for fabrics commands and the discovery controller
to nvmet_parse_admin_cmd in preparation for adding passthrough support.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Discovery controllers need this information as well.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that nvmet_req_execute does nothing, open code it.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[split patch, update changelog]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of storing the expected length and checking it when it's
executed, just check the length inside the command themselves.
A new helper, nvmet_check_data_len() is created to help with this
check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[split patch, udpate changelog]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Push the lid and cns check into their respective handlers and, while
we're at it, rename the functions to be consistent with other
discovery handlers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[split patch, update changelog]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of picking the sub-command handler to execute in a nested
switch statement introduce a landing functions that calls out
to the appropriate sub-command handler.
This will allow us to have a common place in the handler to check
the transfer length in a future patch.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[split patch, update change log]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's not apprporiate for the transports to set the data_len
field of the request which is only used by the core.
In this case, just use a variable on the stack to store the
length of the sgl for comparison.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
None of the other transports check data_len which is verified
in core code. The function should instead check that the sgl length
is non-zero.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the new helper function nvme_lba_to_sect() to convert a device
logical block number to a 512B sector number. Use this new helper in
obvious places, cleaning up the code.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename nvme_block_nr() to nvme_sect_to_lba() and use SECTOR_SHIFT
instead of its hard coded value 9. Also add a comment to decribe this
helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_cleanup_cmd should be called for each call to nvme_setup_cmd
(symmetrical functions). Move the call for nvme_cleanup_cmd to the common
core layer and call it during nvme_complete_rq for the good flow. For
error flow, each transport will call nvme_cleanup_cmd independently. Also
take care of a special case of path failure, where we call
nvme_complete_rq without doing nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the status code of canceled requests initiated by the host according
to TP4028 (Status Code 0x371):
"Command Aborted By host: The command was aborted as a result of host
action (e.g., the host disconnected the Fabric connection)."
Also in a multipath environment, unless otherwise specified, errors of
this type (path related) should be retried using a different path, if
one is available.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The calls to nvmet_req_alloc_sgl and rdma_rw_ctx_init should usually
succeed, so add this simple optimization to the fast path.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The call to sgl_alloc shouldn't fail so add this simple optimization to
the fast path.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit doesn't change any logic.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function improves code readability and reduces code duplication.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Code today only clears the association_id if a Disconnect LS is transmit.
Remove ambiguity and unconditionally clear the association_id if the
association has been terminated.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change wording on a couple of messages to clarify what happened.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the new category field in the FC-NVME CMND_IU based on queue number.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sync sources with revised structure and field names to correspond with
FC-NVME-2 header sync-up.
Tested interoperability with success:
- prior initiator with new target
- prior target with new initiator
- new on new
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
groups_only mode in nvme_read_ana_log() is no longer used: remove it.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
This fails because ctrl disconnects.
Therefore nvme_update_ns_ana_state() is not called
and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
nvme_read_ana_log(ctrl, groups_only=true).
However, nvme_update_ana_state() does not update namespaces
because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.
Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.
More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.
Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.
Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()
Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the current code, the nvme is using a fixed 4k PRP entry size,
but if the kernel use a page size which is more than 4k, we should
consider the situation that the bv_offset may be larger than the
dev->ctrl.page_size. Otherwise we may miss setting the prp2 and then
cause the command can't be executed correctly.
Fixes: dff824b2aa ("nvme-pci: optimize mapping of small single segment requests")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
During nvme_tcp_setup_cmd_pdu error flow, one must call nvme_cleanup_cmd
since it's symmetric to nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
During nvme_loop_queue_rq error flow, one must call nvme_cleanup_cmd since
it's symmetric to nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The access to sk->sk_ll_usec should be hidden behind
CONFIG_NET_RX_BUSY_POLL like the definition of sk_ll_usec.
Put access to ->sk_ll_usec behind CONFIG_NET_RX_BUSY_POLL.
Fixes: 1a9460cef5 ("nvme-tcp: support simple polling")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Prevent simultaneous controller disabling/enabling tasks from interfering
with each other through a function to wait until the task successfully
transitioned the controller to the RESETTING state. This ensures disabling
the controller will not be interrupted by another reset path, otherwise
a concurrent reset may leave the controller in the wrong state.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A paused controller is doing critical internal activation work in the
background. Prevent subsequent controller resets from occurring during
this period by setting the controller state to RESETTING first. A helper
function, nvme_try_sched_reset_work(), is introduced for these paths so
they may continue with scheduling the reset_work after they've completed
their uninterruptible critical section.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A controller in the resetting state has not yet completed its recovery
actions. The pci and fc transports were already handling this, so update
the remaining transports to not attempt additional recovery in this
state. Instead, just restart the request timer.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The admin only state was intended to fence off actions that don't
apply to a non-IO capable controller. The only actual user of this is
the scan_work, and pci was the only transport to ever set this state.
The consequence of having this state is placing an additional burden on
every other action that applies to both live and admin only controllers.
Remove the admin only state and place the admin only burden on the only
place that actually cares: scan_work.
This also prepares to make it easier to temporarily pause a LIVE state
so that we don't need to remember which state the controller had been in
prior to the pause.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If a controller becomes degraded after a reset, we will not be able to
perform any IO. We currently teardown previously created request
queues and namespaces, but we had kept the unusable tagset. Free
it after all queues using it have been released.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 7fd8930f26
"nvme: add a common helper to read Identify Controller data"
has re-introduced an issue that we have attempted to work around in the
past, in commit a310acd7a7 ("NVMe: use split lo_hi_{read,write}q").
The problem is that some PCIe NVMe controllers do not implement 64-bit
outbound accesses correctly, which is why the commit above switched
to using lo_hi_[read|write]q for all 64-bit BAR accesses occuring in
the code.
In the mean time, the NVMe subsystem has been refactored, and now calls
into the PCIe support layer for NVMe via a .reg_read64() method, which
fails to use lo_hi_readq(), and thus reintroduces the problem that the
workaround above aimed to address.
Given that, at the moment, .reg_read64() is only used to read the
capability register [which is known to tolerate split reads], let's
switch .reg_read64() to lo_hi_readq() as well.
This fixes a boot issue on some ARM boxes with NVMe behind a Synopsys
DesignWare PCIe host controller.
Fixes: 7fd8930f26 ("nvme: add a common helper to read Identify Controller data")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nvme_update_formats may fail to revalidate the namespace and
attempt to remove the namespace. This may lead to a deadlock
as nvme_ns_remove will attempt to acquire the subsystem lock
which is already acquired by the passthru command with effects.
Move the invalid namepsace removal to after the passthru command
releases the subsystem lock.
Reported-by: Judy Brock <judy.brock@samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Pull NVMe changes from Sagi:
"This set consists of various fixes and cleanups:
- controller removal race fix from Balbir
- quirk additions from Gabriel and Jian-Hong
- nvme-pci power state save fix from Mario
- Add 64bit user commands (for 64bit registers) from Marta
- nvme-rdma/nvme-tcp fixes from Max, Mark and Me
- Minor cleanups and nits from James, Dan and John"
* 'nvme-5.4' of git://git.infradead.org/nvme:
nvme-rdma: fix possible use-after-free in connect timeout
nvme: Move ctrl sqsize to generic space
nvme: Add ctrl attributes for queue_count and sqsize
nvme: allow 64-bit results in passthru commands
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
nvmet-tcp: remove superflous check on request sgl
Added QUIRKs for ADATA XPG SX8200 Pro 512GB
nvme-rdma: Fix max_hw_sectors calculation
nvme: fix an error code in nvme_init_subsystem()
nvme-pci: Save PCI state before putting drive into deepest state
nvme-tcp: fix wrong stop condition in io_work
nvme-pci: Fix a race in controller removal
nvmet: change ppl to lpp
If the connect times out, we may have already destroyed the
queue in the timeout handler, so test if the queue is still
allocated in the connect error handler.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Current controller interrogation requires a lot of guesswork
on how many io queues were created and what the io sq size is.
The numbers are dependent upon core/fabric defaults, connect
arguments, and target responses.
Add sysfs attributes for queue_count and sqsize.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
It is not possible to get 64-bit results from the passthru commands,
what prevents from getting for the Capabilities (CAP) property value.
As a result, it is not possible to implement IOL's NVMe Conformance
test 4.3 Case 1 for Fabrics targets [1] (page 123).
This issue has been already discussed [2], but without a solution.
This patch solves the problem by adding new ioctls with a new
passthru structure, including 64-bit results. The older ioctls stay
unchanged.
[1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Conformance_Test_Suite_v11.0.pdf
[2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.html
Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Kingston NVME SSD with firmware version E8FK11.T has no interrupt after
resume with actions related to suspend to idle. This patch applied
NVME_QUIRK_SIMPLE_SUSPEND quirk to fix this issue.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204887
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Booting with default_ps_max_latency_us >6000 makes the device fail.
Also SUBNQN is NULL and gives a warning on each boot/resume.
$ nvme id-ctrl /dev/nvme0 | grep ^subnqn
subnqn : (null)
I use this device with an Acer Nitro 5 (AN515-43-R8BF) Laptop.
To be sure is not a Laptop issue only, I tested the device on
my server board with the same results.
( with 2x,4x link on the board and 4x link on a PCI-E card ).
Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
By default, the NVMe/RDMA driver should support max io_size of 1MiB (or
upto the maximum supported size by the HCA). Currently, one will see that
/sys/class/block/<bdev>/queue/max_hw_sectors_kb is 1020 instead of 1024.
A non power of 2 value can cause performance degradation due to
unnecessary splitting of IO requests and unoptimized allocation units.
The number of pages per MR has been fixed here, so there is no longer any
need to reduce max_sectors by 1.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
"ret" should be a negative error code here, but it's either success or
possibly uninitialized.
Fixes: 32fd90c407 ("nvme: change locking for the per-subsystem controller list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The action of saving the PCI state will cause numerous PCI configuration
space reads which depending upon the vendor implementation may cause
the drive to exit the deepest NVMe state.
In these cases ASPM will typically resolve the PCIe link state and APST
may resolve the NVMe power state. However it has also been observed
that this register access after quiesced will cause PC10 failure
on some device combinations.
To resolve this, move the PCI state saving to before SetFeatures has been
called. This has been proven to resolve the issue across a 5000 sample
test on previously failing disk/system combinations.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Allow the do/while statement to continue if current time
is not after the proposed time 'deadline'. Intent is to
allow loop to proceed for a specific time period. Currently
the loop, as coded, will exit after first pass.
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-----BEGIN PGP SIGNATURE-----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=aAPP
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later additions that weren't quite done for the first pull
request, and also a few fixes that have arrived since.
This contains:
- Kill silly pktcdvd warning on attempting to register a non-scsi
passthrough device (me)
- Use symbolic constants for the block t10 protection types, and
switch to handling it in core rather than in the drivers (Max)
- libahci platform missing node put fix (Nishka)
- Small series of fixes for BFQ (Paolo)
- Fix possible nbd crash (Xiubo)"
* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
block: drop device references in bsg_queue_rq()
block: t10-pi: fix -Wswitch warning
pktcdvd: remove warning on attempting to register non-passthrough dev
ata: libahci_platform: Add of_node_put() before loop exit
nbd: fix possible page fault for nbd disk
nbd: rename the runtime flags as NBD_RT_ prefixed
block, bfq: push up injection only after setting service time
block, bfq: increase update frequency of inject limit
block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
block, bfq: update inject limit only after injection occurred
block: centralize PI remapping logic to the block layer
block: use symbolic constants for t10_pi type
User space programs like udevd may try to read to partitions at the
same time the driver detects a namespace is unusable, and may deadlock
if revalidate_disk() is called while such a process is waiting to
enter the frozen queue. On detecting a dead namespace, move the disk
revalidate after unblocking dispatchers that may be holding bd_butex.
changelog Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
In nvmet_bdev_set_limits() the number of logical blocks per
physical block is calculated, but the opposite is mentioned in
the associated comment and reflected in the variable name. Correct
the comment and adjust the variable name to reflect the calculation
done.
Signed-off-by: John Pittman <jpittman@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Qt+h
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
When the command data_len cannot hold all the controller errors,
we should simply return as much errors as we can fit
instead of failing the command.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
If the controller supports discovery log page change events,
we want to enable it. When we see a discovery log change event
we will send it up to userspace and expect it to handle it.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When we send uevents to userspace, add controller specific
environment variables to uniquly identify the controller beyond
its device name.
This will be useful to address discovery log change events by
actually verifying that the discovery controller is indeed the
same as the device that generated the event.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
AENs in general are not related to the presence of I/O queues,
so enable them regardless. Note that the only exception is that
discovery controller will not support any of the requested AENs
and nvme_enable_aen will respect that and return, so it is still
safe to enable regardless.
Note it is safe to enable AENs even before the initial namespace
scanning as we have the scan operation in a workqueue context.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This modifies the behavior of discovery subsystems to accept
a kato as a preparation to support discovery log change
events. This also means that now every discovery controller
will have a default kato value, and for non-persistent connections
the host needs to pass in a zero kato value (keep_alive_tmo=0).
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Simplify this function implementation by using a known function.
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The cq vector is already assigned with the correct value.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The namespace disk names must be unique for the lifetime of the
subsystem. This was accomplished by using their parent subsystems'
instances which were allocated independently from the controllers
connected to that subsystem. This allowed name prefixes assigned to
namespaces to match a controller from an unrelated subsystem, and has
created confusion among users examining device nodes.
Ensure a namespace's subsystem instance never clashes with a controller
instance of another subsystem by transferring the instance ownership
to the parent subsystem from the first controller discovered in that
subsystem.
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The variable ret is being initialized with a value that is never read
and is being re-assigned immediately afterwards. The assignment is
redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nvme_sync_queues currently syncs all namespace queues, but should
also sync the admin queue, if present.
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Current code matches subnqn and collapses all controllers to the
same subnqn to a single subsystem structure. This is good for
recognizing multiple controllers for the same subsystem. But with
the well-known discovery subnqn, the subsystems aren't truly the
same subsystem. As such, subsystem specific rules, such as no
overlap of controller id, do not apply. With today's behavior, the
check for overlap of controller id can fail, preventing the new
discovery controller from being created.
When searching for like subsystem nqn, exclude the discovery nqn
from matching. This will result in each discovery controller being
attached to a unique subsystem structure.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
If a controller reset is racing with a namespace revalidation, the
revalidation (admin) I/O will surely fail, but we should not remove the
namespace as we will execute the I/O when the controller is back up.
Same for spurious allocation errors (return -ENOMEM).
Fix this by checking the specific error code in nvme_revalidate_disk and
if it is a transient error (for example non DNR nvme statuses or
a negative ENOMEM as allocation failure), do not remove the namespace as
it will either recover when the controller is back up and schedule
a subsequent scan, or the controller is going away and the namespaces
will be removed anyways.
This fixes a hang namespace scanning racing with a controller reset and
also sporious I/O errors in path failover coditions where the
controller reset is racing with the namespace scan work with multipath
enabled.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Make the callers check the return status and propagate
back accordingly (casting to errno from a positive nvme status).
Also print the return status in nvme_report_ns_ids.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
right now callers of nvme_identify_ns only know that it failed,
but don't know why. Make nvme_identify_ns propagate the error back.
Because nvme_submit_sync_cmd may return a positive status code, we
make nvme_identify_ns receive the id by reference and return that
status up the call chain, but make sure not to leak positive nvme
status codes to the upper layers.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
NVME_SC_INTERNAL should indicate an internal controller errors
and not host transport errors. These errors will propagate to
upper layers (essentially nvme core) and be interpereted as
transport errors which should not be taken into account for
namespace state or condition.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This is a more appropriate error status for a transport error
detected by us (the host).
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
NVME_SC_ABORT_REQ means that the request was aborted due to
an abort command received. In our case, this is a transport
cancellation, so host pathing error is much more appropriate.
Also, convert NVME_SC_HOST_PATH_ERROR to BLK_STS_TRANSPORT for
such that callers can understand that the status is a transport
related error. This will be used by the ns scanning code to
understand if it got an error from the controller or that the
controller happens to be unreachable by the transport.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Remove pointless local variable and use rq_dma_dir macro.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
We have a fundamental issue that fabric commands use the admin_q.
The reason is, that admin-connect, register reads and writes and
admin commands cannot be guaranteed ordering while we are running
controller resets.
For example, when we reset a controller we perform:
1. disable the controller
2. teardown the admin queue
3. re-establish the admin queue
4. enable the controller
In order to perform (3), we need to unquiesce the admin queue, however
we may have some admin commands that are already pending on the
quiesced admin_q and will immediate execute when we unquiesce it before
we execute (4). The host must not send admin commands to the controller
before enabling the controller.
To fix this, we have the fabric commands (admin connect and property
get/set, but not I/O queue connect) use a separate fabrics_q and make
sure to quiesce the admin_q before we disable the controller, and
unquiesce it only after we enable the controller.
This fixes the error prints from nvmet in a controller reset storm test:
kernel: nvmet: got cmd 6 while CC.EN == 0 on qid = 0
Which indicate that the host is sending an admin command when the
controller is not enabled.
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Another issue with the Apple T2 based 2018 controllers seem to be
that they blow up (and shut the machine down) if there's a tag
collision between the IO queue and the Admin queue.
My suspicion is that they use our tags for their internal tracking
and don't mix them with the queue id. They also seem to not like
when tags go beyond the IO queue depth, ie 128 tags.
This adds a quirk that marks tags 0..31 of the IO queue reserved
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Based on reverse engineering and original patch by
Paul Pawlowski <paul@mrarm.io>
This adds support for Apple weird implementation of NVME in their
2018 or later machines. It accounts for the twice-as-big SQ entries
for the IO queues, and the fact that only interrupt vector 0 appears
to function properly.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The size of a submission queue element should always be 6 (64 bytes)
by spec.
However some controllers such as Apple's are not properly implementing
the standard and require a different size.
This provides the ground work for the subsequent quirks for these
controllers.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This will make it easier to handle variable queue entry sizes
later. No functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When native multipathing is enabled we cannot enable blktrace for
the underlying paths, so any completion is never traced.
Signed-off-by: Hannes Reinecke <hare@suse.com>
[fixed-up by Mikhail for non-multipath-build]
Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
ANA log parsing invokes nvme_update_ana_state() per ANA group desc.
This updates the state of namespaces with nsids in desc->nsids[].
Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid.
Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces:
- if current namespace matches the current desc->nsids[n],
this namespace is updated, and n is incremented.
- the process stops when it encounters the end of either
ctrl->namespaces end or desc->nsids[]
In case desc->nsids[n] does not match any of ctrl->namespaces,
the remaining nsids following desc->nsids[n] will not be updated.
Such situation was considered abnormal and generated WARN_ON_ONCE.
However ANA log MAY contain nsids not (yet) found in ctrl->namespaces.
For example, lets consider the following scenario:
- nvme0 exposes namespaces with nsids = [2, 3] to the host
- a new namespace nsid = 1 is added dynamically
- also, a ANA topology change is triggered
- NS_CHANGED aen is generated and triggers scan_work
- before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA
aen was issues and ana_work receives ANA log with nsids=[1, 2, 3]
Result: ana_work fails to update ANA state on existing namespaces [2, 3]
Solution:
Change the way nvme_update_ana_state() namespace list walk
checks the current namespace against desc->nsids[n] as follows:
a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces.
b) ns->head->ns_id == desc->nsids[n]: match, update the namespace
c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1]
This enables correct operation in the scenario described above.
This also allows ANA log to contain nsids currently invisible
to the host, i.e. inactive nsids.
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Set the outgoing packets type of service (TOS) according to the
receiving TOS.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
TOS provide clients the ability to segregate traffic flows for
different type of data.
One of the TOS usage is bandwidth management which allows setting bandwidth
limits for QoS classes, e.g. 80% bandwidth to controllers at QoS class A
and 20% to controllers at QoS class B.
usage examples:
nvme connect --tos=0 --transport=tcp --traddr=10.0.1.1 --nqn=test-nvme
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
For RDMA transports, TOS is an extension of IB QoS to provide clients
the ability to segregate traffic flows for different type of data.
RDMA CM abstract it for ULPs using rdma_set_service_type().
Internally, each traffic flow is represented by a connection with all of
its independent resources like that of a normal connection, and is
differentiated by service type. In other words, there can be multiple qp
connections between an IP pair and each supports a unique service type.
One of the TOS usage is bandwidth management which allows setting bandwidth
limits for QoS classes, e.g. 80% bandwidth to controllers at QoS class A
and 20% to controllers at QoS class B.
Note: In addition to the TOS configuration, QOS must be configured on the
relevant HCA on the target (send RDMA commands) and initiator to effect
the traffic.
usage examples:
nvme connect --tos=0 --transport=rdma --traddr=10.0.1.1 --nqn=test-nvme
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
TOS is user-defined and needs to be configured via nvme-cli.
It must be set before initiating any traffic and once set the TOS
cannot be changed.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
when we uninit a command in error flow we also need to
free an iovec if it was allocated.
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Four different fields are in CDWs of Get LBA Status command which means
it would be great if we can see in detail when tracing in target side
also.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Four different fields are in CDWs of Get LBA Status command which means
it would be great if we can see in detail when tracing.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
In nvme spec 1.3 there is a definition for data write/read counters
from SMART log, (See section 5.14.1.2):
This value is reported in thousands (i.e., a value of 1
corresponds to 1000 units of 512 bytes read) and is rounded up.
However, in nvme target where value is reported with actual units,
but not thousands of units as the spec requires.
Signed-off-by: Tom Wu <tomwu@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Simple polling support via socket busy_poll interface.
Although we do not shutdown interrupts but simply hammer
the socket poll, we can sometimes find completions faster
than the normal interrupt driven RX path.
We add per queue nr_cqe counter that resets every time
RX path is invoked such that .poll callback can return it
to stay consistent with the semantics.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The tcp host module is now taking those APIs from crypto ahash:
(1) crypto_ahash_final()
(2) crypto_ahash_digest()
(3) crypto_alloc_ahash()
nvme-tcp should depends on CRYPTO_CRC32C.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
All seem to call it with ctrl->cap so no need to pass it
at all.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nvme_enable_ctrl reads the cap register right after, so
no need to do that locally in the transport driver. Have
sqsize setting in nvme_init_identify.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
No need to use a stack cap variable.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Using socket specific read_sock() calls instead of directly calling
tcp_read_sock() helps lld module registered handlers if any, to be called
from nvme-tcp host.
This patch therefore replaces the tcp_read_sock() with socket specific
prot_ops.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.
When this situation occurs the drive doesn't resume properly from
suspend-to-idle.
LiteON has confirmed this problem and fixed in the next firmware
version. As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Charles Hyde <charles.hyde@dellteam.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
introduced a validation for controllers with duplicate cntlid that runs
on nvme_init_subsystem(). The problem is that the validation relies on
ctrl->cntlid, and this value is assigned (from id_ctrl value) after the
call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics
scenario. That leads to ctrl->cntlid always being 0 in case we have a
physical set of controllers in the same subsystem.
This patch fixes that by loading the discovered cntlid id_ctrl value into
ctrl->cntlid before the subsystem initialization, only for the non-fabrics
case. The patch was tested with emulated nvme devices (qemu) having two
controllers in a single subsystem. Without the patch, we couldn't make
it work failing in the duplicate check; when running with the patch, we
could see the subsystem holding both controllers.
For the fabrics case we see ctrl->cntlid has a more intricate relation
with the admin connect, so we didn't change that.
Fixes: 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_state_set_live() making a path available triggers requeue_work
in order to resubmit requests that ended up on requeue_list when no
paths were available.
This requeue_work may race with concurrent nvme_ns_head_make_request()
that do not observe the live path yet.
Such concurrent requests may by made by either:
- New IO submission.
- Requeue_work triggered by nvme_failover_req() or another ana_work.
A race may cause requeue_work capture the state of requeue_list before
more requests get onto the list. These requests will stay on the list
forever unless requeue_work is triggered again.
In order to prevent such race, nvme_state_set_live() should
synchronize_srcu(&head->srcu) before triggering the requeue_work and
prevent nvme_ns_head_make_request referencing an old snapshot of the
path list.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=f6DS
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into this series. This contains:
- Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
were still corner cases there, and even though I had a solution for
it, it's too involved for this stage. (me)
- Set of NVMe fixes (via Sagi)
- io_uring fix for fixed buffers (Anthony)
- io_uring defer issue fix (Jackie)
- Regression fix for queue sync at exit time (zhengbin)
- xen blk-back memory leak fix (Wenwen)"
* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
block: remove REQ_NOWAIT_INLINE
io_uring: fix manual setup of iov_iter for fixed buffers
xen/blkback: fix memory leaks
blk-mq: move cancel of requeue_work to the front of blk_exit_queue
nvme-pci: Fix async probe remove race
nvme: fix controller removal race with scan work
nvme-rdma: fix possible use-after-free in connect error flow
nvme: fix a possible deadlock when passthru commands sent to a multipath device
nvme-core: Fix extra device_put() call on error path
nvmet-file: fix nvmet_file_flush() always returning an error
nvmet-loop: Flush nvme_delete_wq when removing the port
nvmet: Fix use-after-free bug when a port is removed
nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
