access_ok just checks we are fed a proper user pointer. We also do that
in copy_to_user itself, so no need to do this early.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-9-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range. This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no caller left outside of ioctl.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-4-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We better warn the fibmap user and not return a truncated and therefore
an incorrect block map address if the bmap() returned block address
is greater than INT_MAX (since user supplied integer pointer).
It's better to pr_warn() all user of ioctl_fibmap() and return a proper
error code rather than silently letting a FS corruption happen if the
user tries to fiddle around with the returned block map address.
We fix this by returning an error code of -ERANGE and returning 0 as the
block mapping address in case if it is > INT_MAX.
Now iomap_bmap() could be called from either of these two paths.
Either when a user is calling an ioctl_fibmap() interface to get
the block mapping address or by some filesystem via use of bmap()
internal kernel API.
bmap() kernel API is well equipped with handling of u64 addresses.
WARN condition in iomap_bmap_actor() was mainly added to warn all
the fibmap users. But now that we have directly added this warning
for all fibmap users and also made sure to return 0 as block map address
in case if addr > INT_MAX.
So we can now remove this logic from iomap_bmap_actor().
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
One patch in the compat-ioctl series broke 32-bit rootfs for multiple
people testing on 64-bit kernels. Let's fix it in -rc1 before others
run into the same issue.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uMS2
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull compat-ioctl fix from Arnd Bergmann:
"One patch in the compat-ioctl series broke 32-bit rootfs for multiple
people testing on 64-bit kernels. Let's fix it in -rc1 before others
run into the same issue"
* tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
compat_ioctl: fix FIONREAD on devices
Pull misc vfs updates from Al Viro:
- bmap series from cmaiolino
- getting rid of convolutions in copy_mount_options() (use a couple of
copy_from_user() instead of the __get_user() crap)
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
saner copy_mount_options()
fibmap: Reject negative block numbers
fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
ecryptfs: drop direct calls to ->bmap
cachefiles: drop direct usage of ->bmap method.
fs: Enable bmap() function to properly return errors
My final cleanup patch for sys_compat_ioctl() introduced a regression on
the FIONREAD ioctl command, which is used for both regular and special
files, but only works on regular files after my patch, as I had missed
the warning that Al Viro put into a comment right above it.
Change it back so it can work on any file again by moving the implementation
to do_vfs_ioctl() instead.
Fixes: 77b9040195 ("compat_ioctl: simplify the implementation")
Reported-and-tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
FIBMAP receives an integer from userspace which is then implicitly converted
into sector_t to be passed to bmap(). No check is made to ensure userspace
didn't send a negative block number, which can end up in an underflow, and
returning to userspace a corrupted block address.
As a side-effect, the underflow caused by a negative block here, will
trigger the WARN() in iomap_bmap_actor(), which is how this issue was
first discovered.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now we have the possibility of proper error return in bmap, use bmap()
function in ioctl_fibmap() instead of calling ->bmap method directly.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that both native and compat ioctl syscalls are
in the same file, a couple of simplifications can
be made, bringing the implementation closer together:
- do_vfs_ioctl(), ioctl_preallocate(), and compat_ioctl_preallocate()
can become static, allowing the compiler to optimize better
- slightly update the coding style for consistency between
the functions.
- rather than listing each command in two switch statements
for the compat case, just call a single function that has
all the common commands.
As a side-effect, FS_IOC_RESVSP/FS_IOC_RESVSP64 are now available
to x86 compat tasks, along with FS_IOC_RESVSP_32/FS_IOC_RESVSP64_32.
This is harmless for i386 emulation, and can be considered a bugfix
for x32 emulation, which never supported these in the past.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rest of the fs/compat_ioctl.c file is no longer useful now,
so move the actual syscall as planned.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the allocation
request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never been
mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing them
to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio corrupting
the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to reduce
indirection penalties
- Ensure that dquots are attached to the inode when performing unwritten
extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks
-----BEGIN PGP SIGNATURE-----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=aACq
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"For this release, we changed quite a few things.
Highlights:
- Fixed some long tail latency problems in the block allocator
- Removed some long deprecated (and for the past several years no-op)
mount options and ioctls
- Strengthened the extended attribute and directory verifiers
- Audited and fixed all the places where we could return EFSCORRUPTED
without logging anything
- Refactored the old SGI space allocation ioctls to make the
equivalent fallocate calls
- Fixed a race between fallocate and directio
- Fixed an integer overflow when files have more than a few
billion(!) extents
- Fixed a longstanding bug where quota accounting could be incorrect
when performing unwritten extent conversion on a freshly mounted fs
- Fixed various complaints in scrub about soft lockups and
unresponsiveness to signals
- De-vtable'd the directory handling code, which should make it
faster
- Converted to the new mount api, for better or for worse
- Cleaned up some memory leaks
and quite a lot of other smaller fixes and cleanups.
A more detailed summary:
- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the
allocation request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never
been mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing
them to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio
corrupting the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to
reduce indirection penalties
- Ensure that dquots are attached to the inode when performing
unwritten extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks"
* tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits)
xfs: allow parent directory scans to be interrupted with fatal signals
xfs: remove the mappedbno argument to xfs_da_get_buf
xfs: remove the mappedbno argument to xfs_da_read_buf
xfs: split xfs_da3_node_read
xfs: remove the mappedbno argument to xfs_dir3_leafn_read
xfs: remove the mappedbno argument to xfs_dir3_leaf_read
xfs: remove the mappedbno argument to xfs_attr3_leaf_read
xfs: remove the mappedbno argument to xfs_da_reada_buf
xfs: improve the xfs_dabuf_map calling conventions
xfs: refactor xfs_dabuf_map
xfs: simplify mappedbno handling in xfs_da_{get,read}_buf
xfs: report corruption only as a regular error
xfs: Remove kmem_zone_free() wrapper
xfs: Remove kmem_zone_destroy() wrapper
xfs: Remove slab init wrappers
xfs: fix attr leaf header freemap.size underflow
xfs: fix some memory leaks in log recovery
xfs: fix another missing include
xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE
xfs: remove duplicated include from xfs_dir2_data.c
...
These use the same scheme as the pre-existing mapping of the XFS
RESVP ioctls to ->falloc, so just extend it and remove the XFS
implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[darrick: fix compile error on s390]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
... and lose the ridiculous games with compat_alloc_user_space()
there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
casting to pointer to int, only to pass that to function that
takes pointer to void and uses it as pointer to structure is
really asking for trouble.
"Some pointer, I'm not sure what to" is spelled "void *",
not "int *"; use that.
And declare the functions we are passing that pointer to
as taking the pointer to what they really want to access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many drivers have ioctl() handlers that are completely compatible between
32-bit and 64-bit architectures, except for the argument that is passed
down from user space and may have to be passed through compat_ptr()
in order to become a valid 64-bit pointer.
Using ".compat_ptr = compat_ptr_ioctl" in file operations should let
us simplify a lot of those drivers to avoid #ifdef checks, and convert
additional drivers that don't have proper compat handling yet.
On most architectures, the compat_ptr_ioctl() just passes all arguments
to the corresponding ->ioctl handler. The exception is arch/s390, where
compat_ptr() clears the top bit of a 32-bit pointer value, so user space
pointers to the second 2GB alias the first 2GB, as is the case for native
32-bit s390 user space.
The compat_ptr_ioctl() function must therefore be used only with
ioctl functions that either ignore the argument or pass a pointer to a
compatible data type.
If any ioctl command handled by fops->unlocked_ioctl passes a plain
integer instead of a pointer, or any of the passed data types is
incompatible between 32-bit and 64-bit architectures, a proper handler
is required instead of compat_ptr_ioctl.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v3: add a better description
v2: use compat_ptr_ioctl instead of generic_compat_ioctl_ptrarg,
as suggested by Al Viro
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use
a common .remap_file_range method and supply generic bounds and sanity checking
functions that are shared with the data write path. The current VFS
infrastructure has problems with rlimit, LFS file sizes, file time stamps,
maximum filesystem file sizes, stripping setuid bits, etc and so they are
addressed in these commits.
We also introduce the ability for the ->remap_file_range methods to return short
clones so that clones for vfs_copy_file_range() don't get rejected if the entire
range can't be cloned. It also allows filesystems to sliently skip deduplication
of partial EOF blocks if they are not capable of doing so without requiring
errors to be thrown to userspace.
All existing filesystems are converted to user the new .remap_file_range method,
and both XFS and ocfs2 are modified to make use of the new generic checking
infrastructure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CE/A
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
Plumb a remap_flags argument through the {do,vfs}_clone_file_range
functions so that clone can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some anon_bdev filesystems (e.g. overlayfs, ceph) don't have s_blocksize
set. Returning zero from FIGETBSZ ioctl results in a Floating point
exception from the e2fsprogs utility filefrag, which divides the size of
the file with the value returned by FIGETBSZ.
Fix the interface by returning -EINVAL for these filesystems.
Fixes: d1d04ef857 ("ovl: stack file ops")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 031a072a0b ("vfs: call vfs_clone_file_range() under freeze
protection") created a wrapper do_clone_file_range() around
vfs_clone_file_range() moving the freeze protection to former, so
overlayfs could call the latter.
The more common vfs practice is to call do_xxx helpers from vfs_xxx
helpers, where freeze protecction is taken in the vfs_xxx helper, so
this anomality could be a source of confusion.
It seems that commit 8ede205541 ("ovl: add reflink/copyfile/dedup
support") may have fallen a victim to this confusion -
ovl_clone_file_range() calls the vfs_clone_file_range() helper in the
hope of getting freeze protection on upper fs, but in fact results in
overlayfs allowing to bypass upper fs freeze protection.
Swap the names of the two helpers to conform to common vfs practice
and call the correct helpers from overlayfs and nfsd.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The user in control of a super block should be allowed to freeze
and thaw it. Relax the restrictions on the FIFREEZE and FITHAW
ioctls to require CAP_SYS_ADMIN in s_user_ns.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Using this helper allows us to avoid the in-kernel calls to the
sys_ioctl() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_ioctl().
After careful review, at least some of these calls could be converted
to do_vfs_ioctl() in future.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of including the full <linux/signal.h>, we are going to include the
types-only <linux/signal_types.h> header in <linux/sched.h>, to further
decouple the scheduler header from the signal headers.
This means that various files which relied on the full <linux/signal.h> need
to be updated to gain an explicit dependency on it.
Update the code that relies on sched.h's inclusion of the <linux/signal.h> header.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move sb_start_write()/sb_end_write() out of the vfs helper and up into the
ioctl handler.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FICLONE/FICLONERANGE ioctls return -EXDEV if src and dest
files are not on the same mount point.
Practically, clone only requires that src and dest files
are on the same file system.
Move the check for same mount point to ioctl handler and keep
only the check for same super block in the vfs helper.
A following patch is going to use the vfs_clone_file_range()
helper in overlayfs to copy up between lower and upper
mount points on the same file system.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Kirill A Shutemov reports that the kernel doesn't try to cap dest_count
in any way, and uses the number to allocate kernel memory. This causes
high order allocation warnings in the kernel log if someone passes in a
big enough value. We should clamp the allocation at PAGE_SIZE to avoid
stressing the VM.
The two existing users of the dedupe ioctl never send more than 120
requests, so we can safely clamp dest_range at PAGE_SIZE, because with
4k pages we can handle up to 127 dedupe candidates. Given the max
extent length of 16MB, we can end up doing 2GB of IO which is plenty.
[ Note: the "offsetof()" can't overflow, because 'count' is just a
16-bit integer. That's not obvious in the limited context of the
patch, so I'm noting it here because it made me go look. - Linus ]
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the VFS functions in the dedupe ioctl path return int status, so
the ioctl handler ought to as well.
Found by Coverity, CID 1350952.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prevents a double-fetch from user space that can lead to to an
undersized allocation and heap overflow.
Fixes: 54dbc15172 ("vfs: hoist the btrfs deduplication ioctl to the vfs")
Signed-off-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs copy_file_range updates from Al Viro:
"Several series around copy_file_range/CLONE"
* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: use new dedupe data function pointer
vfs: hoist the btrfs deduplication ioctl to the vfs
vfs: wire up compat ioctl for CLONE/CLONE_RANGE
cifs: avoid unused variable and label
nfsd: implement the NFSv4.2 CLONE operation
nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
vfs: pull btrfs clone API to vfs layer
locks: new locks_mandatory_area calling convention
vfs: Add vfs_copy_file_range() support for pagecache copies
btrfs: add .copy_file_range file operation
x86: add sys_copy_file_range to syscall tables
vfs: add copy_file_range syscall and vfs helper
Hoist the btrfs EXTENT_SAME ioctl up to the VFS and make the name
more systematic (FIDEDUPERANGE).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The btrfs clone ioctls are now adopted by other file systems, with NFS
and CIFS already having support for them, and XFS being under active
development. To avoid growth of various slightly incompatible
implementations, add one to the VFS. Note that clones are different from
file copies in several ways:
- they are atomic vs other writers
- they support whole file clones
- they support 64-bit legth clones
- they do not allow partial success (aka short writes)
- clones are expected to be a fast metadata operation
Because of that it would be rather cumbersome to try to piggyback them on
top of the recent clone_file_range infrastructure. The converse isn't
true and the clone_file_range system call could try clone file range as
a first attempt to copy, something that further patches will enable.
Based on earlier work from Peng Tao.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__generic_block_fiemap may spin very long time for large sparse files.
Without this patch an unprivileged user may abuse system resources simply
by spawning a vast number of unkilable busyloops (works on ext2/ext3):
truncate --size 1T test
for ((i=0;i<1024;i++))
do
filefrag test > /dev/null &
done
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull nfsd updates from Bruce Fields:
"A comparatively quieter cycle for nfsd this time, but still with two
larger changes:
- RPC server scalability improvements from Jeff Layton (using RCU
instead of a spinlock to find idle threads).
- server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
Schumaker, enabling fallocate on new clients"
* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd4: fix xdr4 count of server in fs_location4
nfsd4: fix xdr4 inclusion of escaped char
sunrpc/cache: convert to use string_escape_str()
sunrpc: only call test_bit once in svc_xprt_received
fs: nfsd: Fix signedness bug in compare_blob
sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
sunrpc: convert to lockless lookup of queued server threads
sunrpc: fix potential races in pool_stats collection
sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
sunrpc: require svc_create callers to pass in meaningful shutdown routine
sunrpc: have svc_wake_up only deal with pool 0
sunrpc: convert sp_task_pending flag to use atomic bitops
sunrpc: move rq_cachetype field to better optimize space
sunrpc: move rq_splice_ok flag into rq_flags
sunrpc: move rq_dropme flag into rq_flags
sunrpc: move rq_usedeferral flag to rq_flags
sunrpc: move rq_local field to rq_flags
sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
nfsd: minor off by one checks in __write_versions()
sunrpc: release svc_pool_map reference when serv allocation fails
...
Currently, freezing a filesystem involves calling freeze_super, which locks
sb->s_umount and then calls the fs-specific freeze_fs hook. This makes it
hard for gfs2 (and potentially other cluster filesystems) to use the vfs
freezing code to do freezes on all the cluster nodes.
In order to communicate that a freeze has been requested, and to make sure
that only one node is trying to freeze at a time, gfs2 uses a glock
(sd_freeze_gl). The problem is that there is no hook for gfs2 to acquire
this lock before calling freeze_super. This means that two nodes can
attempt to freeze the filesystem by both calling freeze_super, acquiring
the sb->s_umount lock, and then attempting to grab the cluster glock
sd_freeze_gl. Only one will succeed, and the other will be stuck in
freeze_super, making it impossible to finish freezing the node.
To solve this problem, this patch adds the freeze_super and thaw_super
hooks. If a filesystem implements these hooks, they are called instead of
the vfs freeze_super and thaw_super functions. This means that every
filesystem that implements these hooks must call the vfs freeze_super and
thaw_super functions itself within the hook function to make use of the vfs
freezing code.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This function needs to be exported so it can be used by the NFSD module
when responding to the new ALLOCATE and DEALLOCATE operations in NFS
v4.2. Christoph Hellwig suggested renaming the function to stay
consistent with how other vfs functions are named.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include. Fix up any implicit
include dependencies that were being masked by module.h along
the way.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
We're doing some odd things there, which already messes up various users
(see the net/socket.c code that this removes), and it was going to add
yet more crud to the block layer because of the incorrect error code
translation.
ENOIOCTLCMD is not an error return that should be returned to user mode
from the "ioctl()" system call, but it should *not* be translated as
EINVAL ("Invalid argument"). It should be translated as ENOTTY
("Inappropriate ioctl for device").
That EINVAL confusion has apparently so permeated some code that the
block layer actually checks for it, which is sad. We continue to do so
for now, but add a big comment about how wrong that is, and we should
remove it entirely eventually. In the meantime, this tries to keep the
changes localized to just the EINVAL -> ENOTTY fix, and removing code
that makes it harder to do the right thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move declaration of 'inode' to beginning of the function. Since it
is referenced directly or indirectly (in case of FIFREEZE/FITHAW/
FS_IOC_FIEMAP) it's not harmful IMHO. And remove unnecessary casts
using 'argp' instead.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some filesystems don't deal well with being asked to map less than
blocksize blocks (GFS2 for example). Since we are always mapping at least
blocksize sections anyway, just make sure len is at least as big as a
blocksize so we don't trip up any filesystems. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
