This reverts
67c97fb79a ("dma-buf: add reservation_object_fences helper")
dd7a7d1ff2 ("drm/i915: use new reservation_object_fences helper")
0e1d8083bd ("dma-buf: further relax reservation_object_add_shared_fence")
5d344f58da ("dma-buf: nuke reservation_object seq number")
The scenario that defeats simply grabbing a set of shared/exclusive
fences and using them blissfully under RCU is that any of those fences
may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this
scenario, while keeping the rcu_read_lock we need to establish that no
fence was changed in the dma_resv after a read (or full) memory barrier.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814182401.25009-1-chris@chris-wilson.co.uk
Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/
The only remaining use for this is to protect against setting a new exclusive
fence while we grab both exclusive and shared. That can also be archived by
looking if the exclusive fence has changed or not after completing the
operation.
v2: switch setting excl fence to rcu_assign_pointer
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322380/
During release of the syncpt, we remove it from the list of syncpt and
the tree, but only if it is not already been removed. However, during
signaling, we first remove the syncpt from the list. So, if we
concurrently free and signal the syncpt, the free may decide that it is
not part of the tree and immediately free itself -- meanwhile the
signaler goes on to use the now freed datastructure.
In particular, we get struck by commit 0e2f733add ("dma-buf: make
dma_fence structure a bit smaller v2") as the cb_list is immediately
clobbered by the kfree_rcu.
v2: Avoid calling into timeline_fence_release() from under the spinlock
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381
Fixes: d3862e44da ("dma-buf/sw-sync: Fix locking around sync_timeline lists")
References: 0e2f733add ("dma-buf: make dma_fence structure a bit smaller v2")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812154247.20508-1-chris@chris-wilson.co.uk
Same as for the individual fences, we want to report the actual status
of the fence when queried.
Reported-by: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812091203.29871-1-chris@chris-wilson.co.uk
When one of the array of fences is signaled, propagate its errors to the
parent fence-array (keeping the first error to be raised).
v2: Opencode cmpxchg_local to avoid compiler freakout.
v3: Be careful not to flag an error if we race against signal-on-any.
v4: Same applies to installing the signal cb.
v5: Use cmpxchg to only set the error once before using a nifty idea by
Christian to avoid changing the status after emitting the signal.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811210902.22112-1-chris@chris-wilson.co.uk
Other cores don't busy wait any more and we removed the last user of checking
the seqno for changes. Drop updating the number for shared fences altogether.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322379/?series=64837&rev=1
Add a new helper to get a consistent set of pointers from the reservation
object. While at it group all access helpers together in the header file.
v2: correctly return shared_count as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322378/?series=64837&rev=1
We can add the exclusive fence to the list after making sure we got
a consistent state.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322034/?series=64786&rev=1
Add some helpers to correctly allocate/free reservation_object_lists.
Otherwise we might forget to drop dma_fence references on list destruction.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322031/?series=64786&rev=1
When reservation_object_add_shared_fence is replacing an old fence with a new
one we should not drop the old one before the new one is in place.
Otherwise other cores can busy wait for the new one to appear.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322030/
We can't free up the chain using recursion or we run into a stack overflow.
Manually free up the dangling chain nodes to avoid recursion.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 7bf60c52e0 ("dma-buf: add new dma_fence_chain container v7")
Link: https://patchwork.freedesktop.org/patch/321612/
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
As the set of shared fences is not being changed during reallocation of
the reservation list, we can skip updating the write_seqlock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712080314.21018-2-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=smxY
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull rst conversion of docs from Mauro Carvalho Chehab:
"As agreed with Jon, I'm sending this big series directly to you, c/c
him, as this series required a special care, in order to avoid
conflicts with other trees"
* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
docs: kbuild: fix build with pdf and fix some minor issues
docs: block: fix pdf output
docs: arm: fix a breakage with pdf output
docs: don't use nested tables
docs: gpio: add sysfs interface to the admin-guide
docs: locking: add it to the main index
docs: add some directories to the main documentation index
docs: add SPDX tags to new index files
docs: add a memory-devices subdir to driver-api
docs: phy: place documentation under driver-api
docs: serial: move it to the driver-api
docs: driver-api: add remaining converted dirs to it
docs: driver-api: add xilinx driver API documentation
docs: driver-api: add a series of orphaned documents
docs: admin-guide: add a series of orphaned documents
docs: cgroup-v1: add it to the admin-guide book
docs: aoe: add it to the driver-api book
docs: add some documentation dirs to the driver-api book
docs: driver-model: move it to the driver-api book
docs: lp855x-driver.rst: add it to the driver-api book
...
There are lots of documents under Documentation/*.txt and a few other
orphan documents elsehwere that belong to the driver-API book.
Move them to their right place.
Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts
Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since kmalloc() will round up the allocation to the next slab size or
page, it will normally return a pointer to a memory block bigger than we
asked for. We can query for the actual size of the allocated block using
ksize() and expand our variable size reservation_list to take advantage
of that extra space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712080314.21018-1-chris@chris-wilson.co.uk
They are not used that often and certainly not in a hot path.
Make them normal functions instead of an inline.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/314480/
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove-fbcon-notifiers topic branch is based on rc4, so we need a fresh
backmerge of drm-next to pull it in.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The show_fdinfo handler exports the same information available through
debugfs on a per-buffer basis.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-4-fengc@google.com
This patch adds complimentary DMA_BUF_SET_NAME ioctls, which lets
userspace processes attach a free-form name to each buffer.
This information can be extremely helpful for tracking and accounting
shared buffers. For example, on Android, we know what each buffer will
be used for at allocation time: GL, multimedia, camera, etc. The
userspace allocator can use DMA_BUF_SET_NAME to associate that
information with the buffer, so we can later give developers a
breakdown of how much memory they're allocating for graphics, camera,
etc.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-3-fengc@google.com
By traversing /proc/*/fd and /proc/*/map_files, processes with CAP_ADMIN
can get a lot of fine-grained data about how shmem buffers are shared
among processes. stat(2) on each entry gives the caller a unique
ID (st_ino), the buffer's size (st_size), and even the number of pages
currently charged to the buffer (st_blocks / 512).
In contrast, all dma-bufs share the same anonymous inode. So while we
can count how many dma-buf fds or mappings a process has, we can't get
the size of the backing buffers or tell if two entries point to the same
dma-buf. On systems with debugfs, we can get a per-buffer breakdown of
size and reference count, but can't tell which processes are actually
holding the references to each buffer.
Replace the singleton inode with full-fledged inodes allocated by
alloc_anon_inode(). This involves creating and mounting a
mini-pseudo-filesystem for dma-buf, following the example in fs/aio.c.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-2-fengc@google.com
This is an illegal scenario, to free the fence whilst there are pending
callbacks. Currently, we emit a WARN and then cast aside the callbacks
leaving them dangling. Alternatively, we could set an error on the fence
and then signal fence so that any dependency chains from the fence can
be tidied up, and if they care they can check for the error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609110002.31915-1-chris@chris-wilson.co.uk
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we have to drop the seqcount & rcu lock to perform a krealloc, we
have to restart the loop. In doing so, be careful not to lose track of
the already acquired exclusive fence.
Fixes: fedf54132d ("dma-buf: Restart reservation_object_get_fences_rcu() after writes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: stable@vger.kernel.org #v4.10
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604125323.21396-1-chris@chris-wilson.co.uk
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cross-subsystem Changes:
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
-----BEGIN PGP SIGNATURE-----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=2K7c
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.3, try #2:
UAPI Changes:
- Add HDR source metadata property.
- Make drm.h compile on GNU/kFreeBSD by including stdint.h
- Clarify how the userspace reviewer has to review new kernel UAPI.
- Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough.
Cross-subsystem Changes:
- video/hdmi: Add unpack function for DRM infoframes.
- Device tree bindings:
* Updating a property for Mali Midgard GPUs
* Updating a property for STM32 DSI panel
* Adding support for FriendlyELEC HD702E 800x1280 panel
* Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel
* Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.
* Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel
with resistive touch found on TI's AM335X-EVM.
* Adding support for EDT ETM0430G0DH6 480x272 panel.
- Add OSD101T2587-53TS driver with DT bindings.
- Add Samsung S6E63M0 panel driver with DT bindings.
- Add VXT VL050-8048NT-C01 800x480 panel with DT bindings.
- Dma-buf:
- Make mmap callback actually optional.
- Documentation updates.
- Fix debugfs refcount inbalance.
- Remove unused sync_dump function.
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Add support for HDR infoframes and related EDID parsing.
- Remove prime sg_table caching, now done inside dma-buf.
- Add shiny new drm_gem_vram helpers for simple VRAM drivers;
with some fixes to the new API on top.
- Small fix to job cleanup without timeout handler.
- Documentation fixes to drm_fourcc.
- Replace lookups of drm_format with struct drm_format_info;
remove functions that become obsolete by this conversion.
- Remove double include in bridge/panel.c and some drivers.
- Remove drmP.h include from drm/edid and drm/dp.
- Fix null pointer deref in drm_fb_helper_hotplug_event().
- Remove most members from drm_fb_helper_crtc, only mode_set is kept.
- Remove race of fb helpers with userspace; only restore mode
when userspace is not master.
- Move legacy setup from drm_file.c to drm_legacy_misc.c
- Rework scheduler job destruction.
- drm/bus was removed, remove from TODO.
- Add __drm_atomic_helper_crtc_reset() to subclass crtc_state,
and convert some drivers to use it (conversion is not complete yet).
- Bump vblank timeout wait to 100 ms for atomic.
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually.
- v3d: Small cleanups, adding support for compute shaders,
reservation/synchronization fixes and job management refactoring,
fixes MMU and debugfs.
- lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs.
- stm/ltdc: Assorted fixes and adding FB modifier support.
- amdgpu: Avoid hw reset if guilty job was already signaled.
- virtio: Add seqno to fences, add trace events, use correct flags for fence allocation.
- Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API.
- sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers.
- bochs: Small fix to use PTR_RET_OR_ZERO and driver unload.
- gma500: header fixes
- cirrus: Remove unused files.
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/052875a5-27ba-3832-60c2-193d950afdff@linux.intel.com
To allow a smooth transition from pinning buffer objects to dynamic
invalidation we first start to cache the sg_table for an attachment.
v2: keep closer to the DRM implementation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.kernel.org/patch/10943053/
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=EfK4
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-05-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A bunch of fixes for the merge window closure, doesn't seem to be
anything too major or serious in there.
It does add TU117 turing modesetting to nouveau but it's just an
enable for preexisting code.
amdgpu:
- gpu reset at load crash fix
- ATPX hotplug fix for when dGPU is off
- SR-IOV fixes
radeon:
- r5xx pll fixes
i915:
- GVT (MCHBAR, buffer alignment, misc warnings fixes)
- Fixes for newly enabled semaphore code
- Geminilake disable framebuffer compression
- HSW edp fast modeset fix
- IRQ vs RCU race fix
nouveau:
- Turing modesetting fixes
- TU117 support
msm:
- SDM845 bringup fixes
panfrost:
- static checker fixes
pl111:
- spinlock init fix.
bridge:
- refresh rate register fix for adv7511"
* tag 'drm-next-2019-05-16' of git://anongit.freedesktop.org/drm/drm: (36 commits)
drm/msm: Upgrade gxpd checks to IS_ERR_OR_NULL
drm/msm/dpu: Remove duplicate header
drm/pl111: Initialize clock spinlock early
drm/msm: correct attempted NULL pointer dereference in debugfs
drm/msm: remove resv fields from msm_gem_object struct
drm/nouveau: fix duplication of nv50_head_atom struct
drm/nouveau/disp/dp: respect sink limits when selecting failsafe link configuration
drm/nouveau/core: initial support for boards with TU117 chipset
drm/nouveau/core: allow detected chipset to be overridden
drm/nouveau/kms/gf119-gp10x: push HeadSetControlOutputResource() mthd when encoders change
drm/nouveau/kms/nv50-: fix bug preventing non-vsync'd page flips
drm/nouveau/kms/gv100-: fix spurious window immediate interlocks
drm/bridge: adv7511: Fix low refresh rate selection
drm/panfrost: Add missing _fini() calls in panfrost_device_fini()
drm/panfrost: Only put sync_out if non-NULL
drm/i915: Seal races between async GPU cancellation, retirement and signaling
drm/i915: Fix fastset vs. pfit on/off on HSW EDP transcoder
drm/i915/fbc: disable framebuffer compression on GeminiLake
drm/amdgpu/psp: move psp version specific function pointers to early_init
drm/radeon: prefer lower reference dividers
...
Currently there is an underlying assumption that i915_request_unsubmit()
is synchronous wrt the GPU -- that is the request is no longer in flight
as we remove it. In the near future that may change, and this may upset
our signaling as we can process an interrupt for that request while it
is no longer in flight.
CPU0 CPU1
intel_engine_breadcrumbs_irq
(queue request completion)
i915_request_cancel_signaling
... ...
i915_request_enable_signaling
dma_fence_signal
Hence in the time it took us to drop the lock to signal the request, a
preemption event may have occurred and re-queued the request. In the
process, that request would have seen I915_FENCE_FLAG_SIGNAL clear and
so reused the rq->signal_link that was in use on CPU0, leading to bad
pointer chasing in intel_engine_breadcrumbs_irq.
A related issue was that if someone started listening for a signal on a
completed but no longer in-flight request, we missed the opportunity to
immediately signal that request.
Furthermore, as intel_contexts may be immediately released during
request retirement, in order to be entirely sure that
intel_engine_breadcrumbs_irq may no longer dereference the intel_context
(ce->signals and ce->signal_link), we must wait for irq spinlock.
In order to prevent the race, we use a bit in the fence.flags to signal
the transfer onto the signal list inside intel_engine_breadcrumbs_irq.
For simplicity, we use the DMA_FENCE_FLAG_SIGNALED_BIT as it then
quickly signals to any outside observer that the fence is indeed signaled.
v2: Sketch out potential dma-fence API for manual signaling
v3: And the test_and_set_bit()
Fixes: 52c0fdb25c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508112452.18942-1-chris@chris-wilson.co.uk
(cherry picked from commit 0152b3b3f4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=YFiQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This has two exciting community drivers for ARM Mali accelerators.
Since ARM has never been open source friendly on the GPU side of the
house, the community has had to create open source drivers for the
Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
series. Well done to all involved and hopefully this will help ARM
head in the right direction.
There is also now the ability if you don't have any of the legacy
drivers enabled (pre-KMS) to remove all the pre-KMS support code from
the core drm, this saves 10% or so in codesize on my machine.
i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
moves out of staging.
There are also some rcar-du patches which crossover with media tree
but all should be acked by Mauro.
Summary:
uapi changes:
- Colorspace connector property
- fourcc - new YUV formts
- timeline sync objects initially merged
- expose FB_DAMAGE_CLIPS to atomic userspace
new drivers:
- vboxvideo: moved out of staging
- aspeed: ASPEED SoC BMC chip display support
- lima: ARM Mali4xx GPU acceleration driver support
- panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support
core:
- component helper docs
- unplugging fixes
- devm device init
- MIPI/DSI rate control
- shmem backed gem objects
- connector, display_info, edid_quirks cleanups
- dma_buf fence chain support
- 64-bit dma-fence seqno comparison fixes
- move initial fb config code to core
- gem fence array helpers for Lima
- ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
- lease fixes
ttm:
- unified DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
panel:
- OSD070T1718-19TS panel support
- panel-tpo-td028ttec1 backlight support
- Ronbo RB070D30 MIPI/DSI
- Feiyang FY07024DI26A30-D MIPI-DSI panel
- Rocktech jh057n00900 MIPI-DSI panel
i915:
- Comet Lake (Gen9) PCI IDs
- Updated Icelake PCI IDs
- Elkhartlake (Gen11) support
- DP MST property addtions
- plane and watermark fixes
- Icelake port sync and VEBOX disable fixes
- struct_mutex usage reduction
- Icelake gamma fix
- GuC reset fixes
- make mmap more asynchronous
- sound display power well race fixes
- DDI/MIPI-DSI clocks for Icelake
- Icelake RPS frequency changing support
- Icelake workarounds
amdgpu:
- Use HMM for userptr
- vega20 experimental smu11 support
- RAS support for vega20
- BACO support for vega12 + fixes for vega20
- reworked IH interrupt handling
- amdkfd RAS support
- Freesync improvements
- initial timeline sync object support
- DC Z ordering fixes
- NV12 planes support
- colorspace properties for planes=
- eDP opts if eDP already initialized
nouveau:
- misc fixes
etnaviv:
- misc fixes
msm:
- GPU zap shader support expansion
- robustness ABI addition
exynos:
- Logging cleanups
tegra:
- Shared reset fix
- CPU cache maintenance fix
cirrus:
- driver rewritten using simple helpers
meson:
- G12A support
vmwgfx:
- Resource dirtying management improvements
- Userspace logging improvements
virtio:
- PRIME fixes
rockchip:
- rk3066 hdmi support
sun4i:
- DSI burst mode support
vc4:
- load tracker to detect underflow
v3d:
- v3d v4.2 support
malidp:
- initial Mali D71 support in komeda driver
tfp410:
- omap related improvement
omapdrm:
- drm bridge/panel support
- drop some omap specific panels
rcar-du:
- Display writeback support"
* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
drm/msm/a6xx: No zap shader is not an error
drm/cma-helper: Fix drm_gem_cma_free_object()
drm: Fix timestamp docs for variable refresh properties.
drm/komeda: Mark the local functions as static
drm/komeda: Fixed warning: Function parameter or member not described
drm/komeda: Expose bus_width to Komeda-CORE
drm/komeda: Add sysfs attribute: core_id and config_id
drm: add non-desktop quirk for Valve HMDs
drm/panfrost: Show stored feature registers
drm/panfrost: Don't scream about deferred probe
drm/panfrost: Disable PM on probe failure
drm/panfrost: Set DMA masks earlier
drm/panfrost: Add sanity checks to submit IOCTL
drm/etnaviv: initialize idle mask before querying the HW db
drm: introduce a capability flag for syncobj timeline support
drm: report consistent errors when checking syncobj capibility
drm/nouveau/nouveau: forward error generated while resuming objects tree
drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
drm/nouveau/i2c: Disable i2c bus access after ->fini()
drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
...
The docs state the callback is optional but it is not, make it optional.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329165201.16233-1-afd@ti.com
sync_dump() is an unused, unexported, function that adds 64k to the
kernel image and doesn't even provide locking around the global array it
uses.
add/remove: 0/2 grow/shrink: 0/0 up/down: 0/-65734 (-65734)
Function old new delta
sync_dump 198 - -198
sync_dump_buf 65536 - -65536
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419181904.6199-1-chris@chris-wilson.co.uk
Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[christian@brauner.io: adapt commit message to mention pidfds]
Signed-off-by: Christian Brauner <christian@brauner.io>
Instead of checking the upper values of the sequence number use an explicit
field in the dma_fence_ops structure to note if a sequence should be 32bit
or 64bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/299655/
Lockless container implementation similar to a dma_fence_array, but with
only two elements per node and automatic garbage collection.
v2: properly document dma_fence_chain_for_each, add dma_fence_chain_find_seqno,
drop prev reference during garbage collection if it's not a chain fence.
v3: use head and iterator for dma_fence_chain_for_each
v4: fix reference count in dma_fence_chain_enable_signaling
v5: fix iteration when walking each chain node
v6: add __rcu for member 'prev' of struct chain node
v7: fix rcu warnings from kernel robot
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/295778/?series=58813&rev=1
This adds lockdep asserts to the reservation functions which state in their
documentation that obj->lock must be held. Allows builds with PROVE_LOCKING
enabled to check that the locking requirements are met.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111165302.25556-1-l.stach@pengutronix.de
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXDOTqAAKCRDj7w1vZxhR
xZ8QAQD4j8m9Ea3bzY5Rr8BYUx1k+Cjj6Y6abZmot2rSvdyOHwD+JzJFIFAPZjdd
uOKhLnDlubaaoa6OGPDQShjl9p3gyQE=
=WQGO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
For a lot of use cases we need 64bit sequence numbers. Currently drivers
overload the dma_fence structure to store the additional bits.
Stop doing that and make the sequence number in the dma_fence always
64bit.
For compatibility with hardware which can do only 32bit sequences the
comparisons in __dma_fence_is_later only takes the lower 32bits as significant
when the upper 32bits are all zero.
v2: change the logic in __dma_fence_is_later
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/266927/
Extract of useful code from the timeline work. This provides a function
to return a stub or dummy fence which is always signaled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlv7H/seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhasH/AvNibkzTAPQR7jE
r/R7NIaFUdPpaHYpLpoYIdSWkqpeWtN3q4eldJKWcpFCaE83EzDVu1PRw79rt/lm
JIYbZ2SZWbTB7d2TLEiEF2bFXr+OF8MVc1tSAsP5xTMvV6mIz7+i2xr9R0D4YrKY
ejd+ExF3HimuRf557Uey1MGsRIhedHsHjHbWjvR1MuKzvUv9nAL+1E2KJbfPXacp
LGXElCYcPXoKw+GxMS7C28idgLoEJoS/eVieRiMGsGlgEe/MuaNMU+GRLMde9lI0
c/G/4uumJTHVY7npOjuNt1+2FoLVt8oLlhPcB06R7FIwJN+TupLQifqBkIe2saT6
R6ExonQ=
=+/RR
-----END PGP SIGNATURE-----
Merge v4.20-rc4 into drm-next
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Let's support simultaneous submissions to multiple engines.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626149/
No need for that any more. Just replace the list when there isn't enough
room any more for the additional fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626143/
We accidentally forgot to set "ret" on this error path so it means we
return NULL instead of an error pointer. The caller checks for NULL and
changes it to an error pointer so it doesn't cause an issue at run time.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180914065615.GA12043@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create variable for the list length limit. Serves as documentation,
also allows to make it a module parameter if needed.
Also add a total size limit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-8-kraxel@redhat.com
udmabuf builds without it, but if userspace can not create memfd
handles in the first place it is rather pointless to include it,
except for test builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-7-kraxel@redhat.com
There is a potential execution path in which pointer memfd is NULL when
passed as argument to fput(), hence there is a NULL pointer dereference
in fput().
Fix this by null checking *memfd* before calling fput().
Addresses-Coverity-ID: 1473174 ("Explicit null dereferenced")
Fixes: fbb0de7950 ("Add udmabuf misc device")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904190749.GA9308@embeddedor.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A driver to let userspace turn memfd regions into dma-bufs.
Use case: Allows qemu create dmabufs for the vga framebuffer or
virtio-gpu ressources. Then they can be passed around to display
those guest things on the host. To spice client for classic full
framebuffer display, and hopefully some day to wayland server for
seamless guest window display.
qemu test branch:
https://git.kraxel.org/cgit/qemu/log/?h=sirius/udmabuf
Cc: David Airlie <airlied@linux.ie>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180827093444.23623-1-kraxel@redhat.com
Since commit 9ea0dfbf972 ("dma-buf: make map_atomic and map function
pointers optional"), the core provides the no-op functions when map and
map_atomic are not provided, so we no longer need assert that are
supplied by a dma-buf exporter.
Fixes: 09ea0dfbf9 ("dma-buf: make map_atomic and map function pointers optional")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180807183647.22626-1-chris@chris-wilson.co.uk
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes the BUG_ON spuriously triggering under the following
circumstances:
* reservation_object_reserve_shared is called with shared_count ==
shared_max - 1, so obj->staged is freed in preparation of an in-place
update.
* reservation_object_add_shared_fence is called with the first fence,
after which shared_count == shared_max.
* reservation_object_add_shared_fence is called with a follow-up fence
from the same context.
In the second reservation_object_add_shared_fence call, the BUG_ON
triggers. However, nothing bad would happen in
reservation_object_add_shared_inplace, since both fences are from the
same context, so they only occupy a single slot.
Prevent this by moving the BUG_ON to where an overflow would actually
happen (e.g. if a buggy caller didn't call
reservation_object_reserve_shared before).
v2:
* Fix description of breaking scenario (Christian König)
* Add bugzilla reference
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106418
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704151405.10357-1-michel@daenzer.net
The current Wound-Wait mutex algorithm is actually not Wound-Wait but
Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait
is, contrary to Wait-Die a preemptive algorithm and is known to generate
fewer backoffs. Testing reveals that this is true if the
number of simultaneous contending transactions is small.
As the number of simultaneous contending threads increases, Wait-Wound
becomes inferior to Wait-Die in terms of elapsed time.
Possibly due to the larger number of held locks of sleeping transactions.
Update documentation and callers.
Timings using git://people.freedesktop.org/~thomash/ww_mutex_test
tag patch-18-06-15
Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly
chosen out of 100000. Four core Intel x86_64:
Algorithm #threads Rollbacks time
Wound-Wait 4 ~100 ~17s.
Wait-Die 4 ~150000 ~19s.
Wound-Wait 16 ~360000 ~109s.
Wait-Die 16 ~450000 ~82s.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Co-authored-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
When this was introduced in
commit a519435a96
Author: Christian König <christian.koenig@amd.com>
Date: Tue Oct 20 16:34:16 2015 +0200
dma-buf/fence: add fence_wait_any_timeout function v2
there was a restriction added that this only works if the dma-fence
uses the dma_fence_default_wait hook. Which works for amdgpu, which is
the only caller. Well, until you share some buffers with e.g. i915,
then you get an -EINVAL.
But there's really no reason for this, because all drivers must
support callbacks. The special ->wait hook is only as an optimization;
if the driver needs to create a worker thread for an active callback,
then it can avoid to do that if it knows that there's a process
context available already. So ->wait is just an optimization, just
using the logic in dma_fence_default_wait() should work for all
drivers.
Let's remove this restriction.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503142603.28513-4-daniel.vetter@ffwll.ch
Many drivers have a trivial implementation for ->enable_signaling.
Let's make it optional by assuming that signalling is already
available when the callback isn't present.
v2: Don't do the trick to set the ENABLE_SIGNAL_BIT
unconditionally, it results in an expensive spinlock take for
everyone. Instead just check if the callback is present. Suggested by
Maarten.
Also move misplaced kerneldoc hunk to the right patch.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180504141034.27727-1-daniel.vetter@ffwll.ch
Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
The device parameter is completely unused because it is available in the
attachment structure as well.
v2: fix kerneldoc as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/226643/
The sync_debug.h header is internal, and only used by
sw_sync.c. Therefore, SW_SYNC is always defined and there
is no need for the stubs. Remove them and make the code
simpler.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504180037.10661-1-ezequiel@collabora.com
I shouldn't have pushed this, CI was right - I failed to remove the
BUG_ON(!ops->wait);
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
When this was introduced in
commit a519435a96
Author: Christian König <christian.koenig@amd.com>
Date: Tue Oct 20 16:34:16 2015 +0200
dma-buf/fence: add fence_wait_any_timeout function v2
there was a restriction added that this only works if the dma-fence
uses the dma_fence_default_wait hook. Which works for amdgpu, which is
the only caller. Well, until you share some buffers with e.g. i915,
then you get an -EINVAL.
But there's really no reason for this, because all drivers must
support callbacks. The special ->wait hook is only as an optimization;
if the driver needs to create a worker thread for an active callback,
then it can avoid to do that if it knows that there's a process
context available already. So ->wait is just an optimization, just
using the logic in dma_fence_default_wait() should work for all
drivers.
Let's remove this restriction.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-5-daniel.vetter@ffwll.ch
In dma_fence_release() there is a WARN_ON which could be triggered by
several cases of wrong dma-fence usage. This patch adds a comment to
explain two use-cases to help driver developers that use dma-fence
and trigger that WARN_ON to better understand the reasons for it.
v2: change to a more generic, one-liner comment
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'obj'
drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'value'
drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'parent' description in 'sync_pt_create'
drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'inc' description in 'sync_pt_create'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208113816.8288-1-chris@chris-wilson.co.uk
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDUjcACgkQlvcN/ahK
Bwp83Af8D805yWeS/rJ9pLaiaWmfuymMtZVl/IOEssElxFO4d+ya/S4HrcWJQwX6
KinIQiaytKKe3+TXhVRVVwg7nLBFXzaPey6SvFPCgSEa+Bm+b3v0Uk1ll59UfOzs
/IhwIYIvUSCqTVAccpoT8X/85JUQ3iP41RbdfbBwUtpvL+XLl/y29Pw1dtV71ZCH
I3/5zAk3odLd9LuPkyhtg+V1e8pluKlPVGZ0ElOiZ7HlKzc3ekOLNNj563LBHq8y
b2txi2+h/bfBx7PU5JfP6aOKGGameE79/3UExwW0dJJAHqU728KKs/7OaDu7w0vr
UlH0cY/Zc461ejPldXXx8hoKIxJ3bw==
=5EUv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
drm/radeon: only enable swiotlb path when need v2
drm/amdgpu: only enable swiotlb alloc when need v2
drm: add func to get max iomem address v2
drm/vc4: Expose performance counters to userspace
drm: Print the pid when debug logging an ioctl error.
drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
drm/stm: ltdc: add non-alpha color formats
drm/bridge/synopsys: dsi: Add 1.31 version support
drm/bridge/synopsys: dsi: Add read feature
drm/pl111: Support multiple endpoints on the CLCD
drm/pl111: Support variants with broken VBLANK
drm/pl111: Support variants with broken clock divider
drm/pl111: Handle the Versatile RGB/BGR565 mode
drm/pl111: Properly detect the ARM PL110 variants
drm/panel: Add support for ARM Versatile panels
drm/panel: Device tree bindings for ARM Versatile panels
drm/bridge: Rename argument from crtc to bridge
drm/crc: Add support for polling on the data fd.
drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
...
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
Change reservation_object_get_fences_rcu to make the exclusive fence
pointer optional.
If not specified the exclusive fence is put into the fence array as
well.
This is helpful for a couple of cases where we need all fences in a
single array.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110125341.3618-1-christian.koenig@amd.com
We need to set shared_count even if we already have a fence to wait for.
v2: init i to -1 as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122200003.6665-1-christian.koenig@amd.com
Cross-subsystem Changes:
- device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71
panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu)
Core Changes:
The most important changes are:
- Add drm_driver .last_close and .output_poll_changed helpers to reduce
fbdev emulation footprint in drivers (Noralf)
- Fix plane clipping in core and for vmwgfx (Ville)
Then we have a bunch of of improvement for print and debug such as the
addition of a framebuffer debugfs file. ELD connector, HDMI and
improvements. And a bunch of misc improvements, clean ups and style
changes and doc updates
[airlied: drop eld bits from amdgpu_dm]
Driver Changes:
- sii8620: filter unsupported modes and add DVI mode support (Maciej Purski)
- rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen)
- virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu)
- virtio: replace reference/unreference with get/put (Aastha Gupta)
- vc4, gma500: Convert timers to use timer_setup() (Kees Cook)
- vc4: Reject HDMI modes with too high of clocks (Eric)
- vc4: Add support for more pixel formats (Dave Stevenson)
- stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu)
- stm: ltdc: add a 2nd endpoint (Philippe Cornu)
- via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann)
* tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits)
drm/bridge: tc358767: add copyright lines
MAINTAINERS: change maintainer for Rockchip drm drivers
drm/vblank: Fix vblank timestamp debugs
drm/via: use monotonic time for VIA_WAIT_IRQ
dma-buf: Fix ifnullfree.cocci warnings
drm/printer: Add drm_vprintf()
drm/edid: Allow HDMI infoframe without VIC or S3D
video/hdmi: Allow "empty" HDMI infoframes
dma-buf/fence: Fix lock inversion within dma-fence-array
drm/sti: Handle return value of platform_get_irq_byname
drm/vc4: Add support for NV21 and NV61.
drm/vc4: Use .pixel_order instead of custom .flip_cbcr
drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
drm/vmwgfx: Try to fix plane clipping
drm/vmwgfx: Use drm_plane_helper_check_state()
drm/vmwgfx: Remove bogus crtc coords vs fb size check
gpu: gma500: remove unneeded DRIVER_LICENSE #define
drm: don't link DP aux i2c adapter to the hardware device node
...
Ages ago Rob Clark noted,
"Currently with fence-array, we have a potential deadlock situation. If
we fence_add_callback() on an array-fence, the array-fence's lock is
acquired first, and in it's ->enable_signaling() callback, it will install
cbs on it's array-member fences, so the array-member's lock is acquired
second.
But in the signal path, the array-member's lock is acquired first, and
the array-fence's lock acquired second."
Rob proposed either extensive changes to dma-fence to unnest the
fence-array signaling, or to defer the signaling onto a workqueue. This
is a more refined version of the later, that should keep the latency
of the fence signaling to a minimum by using an irq-work, which is
executed asap.
Reported-by: Rob Clark <robdclark@gmail.com>
Suggested-by: Rob Clark <robdclark@gmail.com>
References: 1476635975-21981-1-git-send-email-robdclark@gmail.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114162719.30958-1-chris@chris-wilson.co.uk
Bake in the conflict between the drm_print.h extraction and the
addition of DRM_DEBUG_LEASES since we lost it a few too many times.
Also fix a new use of drm_plane_helper_check_state in msm to follow
Ville's conversion in
commit a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Now allow module init functions to be traced
- Clean up some unused or not used by config events (saves space)
- Clean up of trace histogram code
- Add support for preempt and interrupt enabled/disable events
- Other various clean ups
-----BEGIN PGP SIGNATURE-----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=h3F2
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from
- allow module init functions to be traced
- clean up some unused or not used by config events (saves space)
- clean up of trace histogram code
- add support for preempt and interrupt enabled/disable events
- other various clean ups
* tag 'trace-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits)
tracing, thermal: Hide cpu cooling trace events when not in use
tracing, thermal: Hide devfreq trace events when not in use
ftrace: Kill FTRACE_OPS_FL_PER_CPU
perf/ftrace: Small cleanup
perf/ftrace: Fix function trace events
perf/ftrace: Revert ("perf/ftrace: Fix double traces of perf on ftrace:function")
tracing, dma-buf: Remove unused trace event dma_fence_annotate_wait_on
tracing, memcg, vmscan: Hide trace events when not in use
tracing/xen: Hide events that are not used when X86_PAE is not defined
tracing: mark trace_test_buffer as __maybe_unused
printk: Remove superfluous memory barriers from printk_safe
ftrace: Clear hashes of stale ips of init memory
tracing: Add support for preempt and irq enable/disable events
tracing: Prepare to add preempt and irq trace events
ftrace/kallsyms: Have /proc/kallsyms show saved mod init functions
ftrace: Add freeing algorithm to free ftrace_mod_maps
ftrace: Save module init functions kallsyms symbols for tracing
ftrace: Allow module init functions to be traced
ftrace: Add a ftrace_free_mem() function for modules to use
tracing: Reimplement log2
...
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
The amdgpu issue to also need signaled fences in the reservation objects should
be fixed by now.
Optimize the handling by replacing a signaled fence when adding a new
shared one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114142436.1360-2-christian.koenig@amd.com
The amdgpu issue to also need signaled fences in the reservation objects
should be fixed by now.
Optimize the list by keeping only the not signaled yet fences around.
v2: temporary put the signaled fences at the end of the new container
v3: put the old fence at the end of the new container as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114142436.1360-1-christian.koenig@amd.com
Use rcu_assign_pointer() when setting an rcu protected pointer.
This gets rid of another sparse warning.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Mappings need to be unmapped by calling dma_buf_unmap_attachment() and
not by calling again dma_buf_map_attachment(). Also fix some spelling
mistakes.
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101140630.2884-1-Liviu.Dudau@arm.com
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3
KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3
/utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v
/sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK
1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+
UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM=
=Mhx+
-----END PGP SIGNATURE-----
Backmerge tag 'v4.14-rc7' into drm-next
Linux 4.14-rc7
Requested by Ben Skeggs for nouveau to avoid major conflicts,
and things were getting a bit conflicty already, esp around amdgpu
reverts.
Commit e941759c74 ("fence: dma-buf cross-device synchronization") added
trace event fence_annotate_wait_on, but never used it. It was renamed
to dma_fence_annotate_wait_on by commit f54d186700 ("dma-buf: Rename
struct fence to dma_fence") but still not used. As defined trace events
have data structures and functions created for them, it is a waste of
memory if they are not used. Remove the unused trace event.
Link: http://lkml.kernel.org/r/20171013100625.6c820059@gandalf.local.home
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
sync_file_ioctl_fence_info has a race between filling the status
of the underlying fences and the overall status of the sync_file.
If fence transitions in the time frame between its sync_fill_fence_info
and the later dma_fence_is_signaled for the sync_file, the returned
information is inconsistent showing non-signaled underlying fences but
an overall signaled state.
This patch changes sync_file_ioctl_fence_info to track what has been
encoded and using that as the overall sync_file status.
Tested-by: Vamsidhar Reddy Gaddam <vamsidhar.gaddam@arm.com>
Signed-off-by: John Einar Reitan <john.reitan@arm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009134936.27219-1-john.reitan@arm.com
sg_table is being initialized and is never read before it is updated
again later on, hence making the initialization redundant. Remove
the initialization.
Detected by clang scan-build:
"warning: Value stored to 'sg_table' during its initialization is
never read"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914230516.6056-1-colin.king@canonical.com
To avoid hanging userspace components that might have been waiting on the
active fences of the destroyed timeline we need to signal with error all
remaining fences on such timeline.
This restore the default behaviour of the Android sw_sync framework, which
Android still relies on. It was broken on the dma fence conversion a few
years ago and never fixed.
v2: Do not bother with cleanup do the list (Chris Wilson)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907190246.16425-2-gustavo@padovan.org
With hardware resets in mind it is possible that all shared fences are
signaled, but the exlusive isn't. Fix waiting for everything in this situation.
v2: make sure we always wait for the exclusive fence
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502384509-10465-3-git-send-email-alexander.deucher@amd.com
If userspace already dropped its own reference by closing the sw_sync
fence fd we might end up in a deadlock where
dma_fence_is_signaled_locked() will trigger the release of the fence and
thus try to hold the lock to remove the fence from the list.
dma_fence_is_signaled_locked() tries to release/free the fence and hold
the lock in the process.
We fix that by changing the order operation and clean up the list and
rb-tree first.
v2: Drop fence get/put dance and manipulate the list first (Chris Wilson)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-2-gustavo@padovan.org
Up until recently sync_file were create to export a single dma-fence to
userspace, and so we could canabalise a bit insie dma-fence to mark
whether or not we had enable polling for the sync_file itself. However,
with the advent of syncobj, we do allow userspace to create multiple
sync_files for a single dma-fence. (Similarly, that the sw-sync
validation framework also started returning multiple sync-files wrapping
a single dma-fence for a syncpt also triggering the problem.)
This patch reverts my suggestion in commit e241655373
("dma-buf/sync_file: only enable fence signalling on poll()") to use a
single bit in the shared dma-fence and restores the sync_file->flags for
tracking the bits individually.
Reported-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes: f1e8c67123 ("dma-buf/sw-sync: Use an rbtree to sort fences in the timeline")
Fixes: e9083420bb ("drm: introduce sync objects (v4)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170728212951.7818-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZdS4PAAoJEHm+PkMAQRiGbEYH/2mukTPOUAfNoWaVjO2YHxuL
5yI3n1838tKIJm967IUmGdckN/RYGPjJxvZ+muXN2/rv23+9j3LVq9vQcsYqRQop
vrWP+hvGGJvOGJ2NYBDB+4AUrPPdeX9stolwyAcYvyCZ8AilPIovm4s2poA+fuQX
D78c8JSfpse32oc93dy4bUz3mRFKTeufstrWEuzqXI691mthF2G9EpA0R3hlbqv+
GiUnNcZVOnOuCt/47GnpWVKsyv91l3CkGq3bV1GSUi8a/1PnyFxHQxQI/qgbkLXs
NuswRupSeLDQKRgiDLgWF/BpdHEp4dpFFWXm00KWlgxeGSQnKat9bpW/d5OgnhA=
=mv3H
-----END PGP SIGNATURE-----
Backmerge tag 'v4.13-rc2' into drm-next
Linux 4.13-rc2
This is required for drm-misc fixing.
Pick up
1ed134e652 drm/vc4: Fix VBLANK handling in crtc->enable() path
From drm-misc-next-fixes, it was applied after the last pull request
was sent from that branch. We'll send it through drm-fixes instead.
[ 236.821534] WARNING: kmemcheck: Caught 64-bit read from uninitialized memory (ffff8802538683d0)
[ 236.828642] 420000001e7f0000000000000000000000080000000000000000000000000000
[ 236.839543] i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
[ 236.850420] ^
[ 236.854123] RIP: 0010:[<ffffffff81396f07>] [<ffffffff81396f07>] fence_signal+0x17/0xd0
[ 236.861313] RSP: 0018:ffff88024acd7ba0 EFLAGS: 00010282
[ 236.865027] RAX: ffffffff812f6a90 RBX: ffff8802527ca800 RCX: ffff880252cb30e0
[ 236.868801] RDX: ffff88024ac5d918 RSI: ffff880252f780e0 RDI: ffff880253868380
[ 236.872579] RBP: ffff88024acd7bc0 R08: ffff88024acd7be0 R09: 0000000000000000
[ 236.876407] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880253868380
[ 236.880185] R13: ffff8802538684d0 R14: ffff880253868380 R15: ffff88024cd48e00
[ 236.883983] FS: 00007f1646d1a740(0000) GS:ffff88025d000000(0000) knlGS:0000000000000000
[ 236.890959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 236.894702] CR2: ffff880251360318 CR3: 000000024ad21000 CR4: 00000000001406f0
[ 236.898481] [<ffffffff8130d1ad>] i915_gem_request_retire+0x1cd/0x230
[ 236.902439] [<ffffffff8130e2b3>] i915_gem_request_alloc+0xa3/0x2f0
[ 236.906435] [<ffffffff812fb1bd>] i915_gem_do_execbuffer.isra.41+0xb6d/0x18b0
[ 236.910434] [<ffffffff812fc265>] i915_gem_execbuffer2+0x95/0x1e0
[ 236.914390] [<ffffffff812ad625>] drm_ioctl+0x1e5/0x460
[ 236.918275] [<ffffffff8110d4cf>] do_vfs_ioctl+0x8f/0x5c0
[ 236.922168] [<ffffffff8110da3c>] SyS_ioctl+0x3c/0x70
[ 236.926090] [<ffffffff814b7a5f>] entry_SYSCALL_64_fastpath+0x17/0x93
[ 236.930045] [<ffffffffffffffff>] 0xffffffffffffffff
We only set the timestamp before we mark the fence as signaled. It is
done before to avoid observers having a window in which they may see the
fence as complete but no timestamp. Having it does incur a potential for
the timestamp to be written twice, and even for it to be corrupted if
the u64 write is not atomic. Instead use a new bit to record the
presence of the timestamp, and teach the readers to wait until it is set
if the fence is complete. There still remains a race where the timestamp
for the signaled fence may be shown before the fence is reported as
signaled, but that's a pre-existing error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reported-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214124001.1930-1-chris@chris-wilson.co.uk
Reduce the list iteration when incrementing the timeline by storing the
fences in increasing order.
v2: Prevent spinlock recursion on free during create
v3: Fixup rebase conflict inside comments that escaped the compiler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629211253.22766-1-chris@chris-wilson.co.uk
The sync_pt were not adding themselves atomically to the timeline lists,
corruption imminent. Only a single list is required to track the
unsignaled sync_pt, so reduce it and rename the lock more appropriately
along with using idiomatic names to distinguish a list from links along
it.
v2: Prevent spinlock recursion on free during create (next patch) and
fixup crossref in kerneldoc
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629210532.5617-1-chris@chris-wilson.co.uk
Since sync_pt is only allocated from a single location and is no longer
the base class for fences (that is struct dma_fence) it no longer needs
a generic unsized allocator.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-5-chris@chris-wilson.co.uk
If we know the context under which we are called, then we can use the
simpler form of spin_lock_irq (saving the save/restore).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-4-chris@chris-wilson.co.uk
The timeline is u32, which limits any single advance to INT_MAX so that
we can detect all fences that need signaling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-3-chris@chris-wilson.co.uk
Use the canonical __dma_fence_is_later() to compare the fence seqno
against the timeline seqno to check if the fence is signaled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-2-chris@chris-wilson.co.uk
Constructing the name takes the majority of the time for allocating a
sync_file to wrap a fence, and the name is very rarely used (only via
the sync_file status user interface). To reduce the impact on the common
path (that of creating sync_file to pass around), defer the construction
of the name until it is first used.
v2: Update kerneldoc (kbuild test robot)
v3: sync_debug.c was peeking at the name
v4: Comment upon the potential race between two users of
sync_file_get_name() and claim that such a race is below the level of
notice. However, to prevent any future nuisance, use a global spinlock
to serialize the assignment of the name.
v5: Completely avoid the read/write race by only storing the name passed
in from the user inside sync_file->user_name and passing in a buffer to
dynamically construct the name otherwise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170516111042.24719-1-chris@chris-wilson.co.uk
Three single characters (line breaks) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/b8a85220-039a-e4bb-c74b-d76baab234e8@users.sourceforge.net
The script "checkpatch.pl" pointed information out like the following.
Comparison to NULL could be written "!attach"
Thus adjust this expression.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
A bit of data was put into a sequence by two separate function calls.
Print the same data by a single function call instead.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
-----BEGIN PGP SIGNATURE-----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=UxFF
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux into drm-misc-next
Backmerging Dave's 'drm-for-v4.12' pull request now that it's landed. There are
a bunch of non-drm changes which are just random bits we hadn't yet picked up in
misc-next.
main drm pull request for 4.12 kernel
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/CAPM=9ty0jHgzG18zOr5CYODyTqZfH55kOCOFqNnXiWnTb_uNWw@mail.gmail.com
When a timeout of zero is specified, the caller is only interested in
the fence status.
In the current implementation, dma_fence_default_wait will always call
schedule_timeout() at least once for an unsignaled fence. This adds a
significant overhead to a fence status query.
Avoid this overhead by returning early if a zero timeout is specified.
v2: move early return after enable_signaling
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170426144620.3560-1-andresx7@gmail.com
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro
in highmem.h, the former can be aliased if any dma-buf user includes
that header.
I'm personally trying to include highmem.h inside scatterlist.h and this
breaks the dma-buf code proper.
Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP.
To maintain consistency I've renamed all four of kmap* and kunmap* to be
map* and unmap*. (Even though only kmap_atomic presently conflicts.)
[1] https://www.spinics.net/lists/target-devel/msg15070.html
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1492630570-879-1-git-send-email-logang@deltatee.com
sync_file uses the reference count of the file, the internal
kref was never getting moved past 1.
We can reintroduce this if we decide we need it later.
[airlied: fix buildbot warnings]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413014144.637-2-airlied@gmail.com
Add a helper to check if all fences in a fence array are from a given
context. For convenience, the function can also handle being given a
non-array fence.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1489768492-25190-1-git-send-email-p.zabel@pengutronix.de
-----BEGIN PGP SIGNATURE-----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=BSWh
-----END PGP SIGNATURE-----
Merge tag 'doc-4.11-images' of git://git.lwn.net/linux into drm-misc-next
Pointer for Markus's image conversion work.
We need this so we can merge all the pretty drm graphs for 4.12.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add compat ioctl support to dma-buf. This lets one to use DMA_BUF_IOCTL_SYNC
ioctl from 32bit application on 64bit kernel. Data structures for both 32
and 64bit modes are same, so there is no need for additional translation
layer.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487683261-2655-1-git-send-email-m.szyprowski@samsung.com
Currently this tracepoint is solely used by dma_fence_enable_sw_signaling,
however I have a need to manually perform the hw enabling of the
signaling and would like to emit this tracepoint for completeness.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124115758.31353-1-chris@chris-wilson.co.uk
The dma_fence.error field (formerly known as dma_fence.status) is an
optional field that may be set by drivers before calling
dma_fence_signal(). The field can be used to indicate that the fence was
completed in err rather than with success, and is visible to other
consumers of the fence and to userspace via sync_file.
This patch renames the field from status to error so that its meaning is
hopefully more clear (and distinct from dma_fence_get_status() which is
a composite between the error state and signal state) and adds a helper
that validates the preconditions of when it is suitable to adjust the
error field.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-3-chris@chris-wilson.co.uk
The fence->status is an optional field that is only valid once the fence
has been signaled. (Driver may fill the fence->status with an error code
prior to calling dma_fence_signal().) Given the restriction upon its
validity, wrap querying of the fence->status into a helper
dma_fence_get_status().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-2-chris@chris-wilson.co.uk
