Commit Graph

1914 Commits

Author SHA1 Message Date
Linus Torvalds
14b661ebb6 This pull request contains the following core changes:
General changes:
    * Unconfuse get_unmapped_area and point/unpoint driver methods
    * New partition parser: sharpslpart
    * Kill GENERIC_IO
    * Various fixes
 
 NAND changes:
    * Add a flag to mark NANDs that require 3 address cycles to encode a
      page address
    * Set a default ECC/free layout when NAND_ECC_NONE is requested
    * Fix a bug in panic_nand_write()
    * Another batch of cleanups for the denali driver
    * Fix PM support in the atmel driver
    * Remove support for platform data in the omap driver
    * Fix subpage write in the omap driver
    * Fix irq handling in the mtk driver
    * Change link order of mtk_ecc and mtk_nand drivers to speed up boot
      time
    * Change log level of ECC error messages in the mxc driver
    * Patch the pxa3xx driver to support Armada 8k platforms
    * Add BAM DMA support to the qcom driver
    * Convert gpio-nand to the GPIO desc API
    * Fix ECC handling in the mt29f driver
 
 SPI-NOR changes:
    * Introduce system power management support
    * New mechanism to select the proper .quad_enable() hook by JEDEC ID,
      when needed, instead of only by manufacturer ID
    * Add support to new memory parts from Gigadevice, Winbond, Macronix and
      Everspin
    * Maintainance for Cadence, Intel, Mediatek and STM32 drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJaEzkZAAoJEGb5WYXrGLvBiUMP/25eEatNd5pGo9rtXqX463kp
 Q8zXGwtGp7Y2ThtC2TMbSSZZFdhGXIv3AUGpW+Y1yFMzGbiwWh8T28rdgDKDINhl
 jQteoWGQnZnnLhsMEbApJUqqtlxKFkY6COv/fUItmN8a4E5SyYF6ARKdnxH36Quu
 j/i3Kyd1FjDzJE2jsAE6TuomlNRuj/4S0OiZBTlgMhQvbo282Rush6RmF5zAvsdN
 B+S45Q752Pypg3U+1IYkqFSOtSYS3NM1ynZW7YXdWDwcKxDnKvasebSi+wCqPVc8
 n6hkcnXKIMOB6/bGhLg3FZlrzJcH7cbxy2C40NKFmMa7gw+/h1bmvjZk9hubLEc3
 +EJ8/1e8Z/KNTGu+Iyy2BNHTLI+KFKM5n/7/mpSPHMP/0uQjYs95GUmPlhVrenuv
 wprVsQKj7k92E+5Vm/h+Gys67sEG/rQK0v9UEConzl1s2T7i/hnA2lhPfIFmbMU/
 9U2s0CFobDqFUh+O6FSkLg9AT7+gT2HA1t6bbDTJMgnbFW72vlDUiArniia9hWOx
 dSc5pxMnaSiiqk+uCma4zLv2/3Tyi5dAEMQy+qAlK1EpmwPAsyu3SEMbyraovb9S
 PW0YQcMxVlQ/+EdDZCi83ypMlMQE/fDNcuKVMQD9enbko9yKGEgSZsTm9XwIvAv6
 g0P5jYMind1aNNSfg/QM
 =wVm7
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd

Pull MTD updates from Richard Weinberger:
 "General changes:
   -  Unconfuse get_unmapped_area and point/unpoint driver methods
   -  New partition parser: sharpslpart
   -  Kill GENERIC_IO
   -  Various fixes

  NAND changes:
   -  Add a flag to mark NANDs that require 3 address cycles to encode a
      page address
   -  Set a default ECC/free layout when NAND_ECC_NONE is requested
   -  Fix a bug in panic_nand_write()
   -  Another batch of cleanups for the denali driver
   -  Fix PM support in the atmel driver
   -  Remove support for platform data in the omap driver
   -  Fix subpage write in the omap driver
   -  Fix irq handling in the mtk driver
   -  Change link order of mtk_ecc and mtk_nand drivers to speed up boot
      time
   -  Change log level of ECC error messages in the mxc driver
   -  Patch the pxa3xx driver to support Armada 8k platforms
   -  Add BAM DMA support to the qcom driver
   -  Convert gpio-nand to the GPIO desc API
   -  Fix ECC handling in the mt29f driver

  SPI-NOR changes:
   -  Introduce system power management support
   -  New mechanism to select the proper .quad_enable() hook by JEDEC
      ID, when needed, instead of only by manufacturer ID
   -  Add support to new memory parts from Gigadevice, Winbond, Macronix
      and Everspin
   -  Maintainance for Cadence, Intel, Mediatek and STM32 drivers"

*  tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits)
  mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid
  mtd: sharpslpart: Add sharpslpart partition parser
  mtd: Add sanity checks in mtd_write/read_oob()
  mtd: remove the get_unmapped_area method
  mtd: implement mtd_get_unmapped_area() using the point method
  mtd: chips/map_rom.c: implement point and unpoint methods
  mtd: chips/map_ram.c: implement point and unpoint methods
  mtd: mtdram: properly handle the phys argument in the point method
  mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD'
  mtd: slram: use memremap() instead of ioremap()
  kconfig: kill off GENERIC_IO option
  mtd: Fix C++ comment in include/linux/mtd/mtd.h
  mtd: constify mtd_partition
  mtd: plat-ram: Replace manual resource management by devm
  mtd: nand: Fix writing mtdoops to nand flash.
  mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID
  mtd: nand: mtk: fix infinite ECC decode IRQ issue
  mtd: spi-nor: Add support for mr25h128
  mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o
  mtd: spi-nor: enable 4B opcodes for mx66l51235l
  ...
2017-11-22 20:46:06 -10:00
Linus Torvalds
4008e6a9bc Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "This contains two bigger than usual tree-wide changes this time. They
  all have proper acks, caused no merge conflicts in linux-next where
  they have been for a while. They are namely:

   - to-gpiod conversion of the i2c-gpio driver and its users (touching
     arch/* and drivers/mfd/*)

   - adding a sbs-manager based on I2C core updates to SMBus alerts
     (touching drivers/power/*)

  Other notable changes:

   - i2c_boardinfo can now carry a dev_name to be used when the device
     is created. This is because some devices in ACPI world need fixed
     names to find the regulators.

   - the designware driver got a long discussed overhaul of its PM
     handling. img-scb and davinci got PM support, too.

   - at24 driver has way better OF support. And it has a new maintainer.
     Thanks Bartosz for stepping up!

  The rest is regular driver updates and fixes"

* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
  ARM: sa1100: simpad: Correct I2C GPIO offsets
  i2c: aspeed: Deassert reset in probe
  eeprom: at24: Add OF device ID table
  MAINTAINERS: new maintainer for AT24 driver
  i2c: nuc900: remove platform_data, too
  i2c: thunderx: Remove duplicate NULL check
  i2c: taos-evm: Remove duplicate NULL check
  i2c: Make i2c_unregister_device() NULL-aware
  i2c: xgene-slimpro: Support v2
  i2c: mpc: remove useless variable initialization
  i2c: omap: Trigger bus recovery in lockup case
  i2c: gpio: Add support for named gpios in DT
  dt-bindings: i2c: i2c-gpio: Add support for named gpios
  i2c: gpio: Local vars in probe
  i2c: gpio: Augment all boardfiles to use open drain
  i2c: gpio: Enforce open drain through gpiolib
  gpio: Make it possible for consumers to enforce open drain
  i2c: gpio: Convert to use descriptors
  power: supply: sbs-message: fix some code style issues
  power: supply: sbs-battery: remove unchecked return var
  ...
2017-11-14 17:52:21 -08:00
Linus Torvalds
2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Linus Torvalds
1e19bded7f hwmon updates for v4.15
- Drivers for MAX31785 and MAX6621
 - Support for AMD family 17h (Ryzen, Threadripper) temperature sensors
 - Various driver cleanups and minor improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaCKuYAAoJEMsfJm/On5mBjVAP/A/gfAv5KGYsuzEm+Oph3UFq
 dQsuqEr7cUhBnhApwfotT9ygNWRfVknPyvCjTJanHXca1eAE+4srgXY3yRpo5s6R
 YlVbkT7fYRO+SrjXsWhKBcctzKjrkyiNYTz+BqGbzQ9Y6QStnkrQTweB1NOAkasy
 o7WsAlh9bX4966GyAq6OOQZ3dOwvKGVl8dovEJQk5ZtW0e0TOrGbPM5KZsXN+Haa
 adUAMBhxEzSH7SqO1UIlnn0DfF7Ikp291Vy03LZKnGDIN/myI602HrRerrnZhDw6
 Beq4YyYRjNVqwkkIwpAlElKAGK5QXhbuUb9ScvhEMZSf2e80t/NzLmDQrWVKevAy
 VSnFaP+cKIx9hYMwQe92fbn1dhASOf5z+LxzC8kyAloUHZ8ZGH6JEkPRFPCijoiV
 MQ+/YM1jpzzAqiW1HilxVouVjq0lhJwrnqozwbrF/HfyeIzBVd76o+4AIrOVFKLR
 zXtKbiLsFQz3GDRGzCp5CswQnyFMU0K5Hpx2iSd7UYx6OWH6Q5Hf6ieC8LJmst1d
 akbFSiExgF+CIZc5TYaFIBO740vpo8EXJesGIA6uZYoMxk8iConahMAkzJV5ik3Z
 H1LghVhkgYjccdJQ/dxfmQ87+P4bYeRp0KQPRHBAHTcUe0htqR006rcsDDBwznGx
 LwrUeeSMf+dS7dj+jSLV
 =NpxT
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - drivers for MAX31785 and MAX6621

 - support for AMD family 17h (Ryzen, Threadripper) temperature sensors

 - various driver cleanups and minor improvements

* tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits)
  dt-bindings: pmbus: Add Maxim MAX31785 documentation
  pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller
  hwmon: (aspeed-pwm-tacho) Sort headers
  hwmon: (xgene) Minor clean up of ifdef and acpi_match_table reference
  hwmon: (max6621) Inverted if condition in max6621_read()
  hwmon: (asc7621) remove redundant assignment to newval
  hwmon: (xgene) Support hwmon v2
  hwmon: (gpio-fan) Fix null pointer dereference at probe
  hwmon: (gpio-fan) Convert to use GPIO descriptors
  hwmon: (gpio-fan) Rename GPIO line state variables
  hwmon: (gpio-fan) Get rid of the gpio alarm struct
  hwmon: (gpio-fan) Get rid of platform data struct
  hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path
  hwmon: (gpio-fan) Send around device pointer
  hwmon: (gpio-fan) Localize platform data
  hwmon: (gpio-fan) Use local variable pointers
  hwmon: (gpio-fan) Move DT bindings to the right place
  Documentation: devicetree: add max6621 device
  hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor
  hwmon: (w83793) make const array watchdog_minors static, reduces object code size
  ...
2017-11-13 08:55:46 -08:00
Kees Cook
96d130824f arm: pxa: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a static variable to hold the
interrupt private data pointer.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02 15:50:35 -07:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Walleij
4d0ce62c0a i2c: gpio: Augment all boardfiles to use open drain
We now handle the open drain mode internally in the I2C GPIO
driver, but we will get warnings from the gpiolib that we
override the default mode of the line so it becomes open
drain.

We can fix all in-kernel users by simply passing the right
flag along in the descriptor table, and we already touched
all of these files in the series so let's just tidy it up.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Wu, Aaron <Aaron.Wu@analog.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-30 08:42:43 +01:00
Linus Walleij
b2e6355559 i2c: gpio: Convert to use descriptors
This converts the GPIO-based I2C-driver to using GPIO
descriptors instead of the old global numberspace-based
GPIO interface. We:

- Convert the driver to unconditionally grab two GPIOs
  from the device by index 0 (SDA) and 1 (SCL) which
  will work fine with device tree and descriptor tables.
  The existing device trees will continue to work just
  like before, but without any roundtrip through the
  global numberspace.

- Brutally convert all boardfiles still passing global
  GPIOs by registering descriptor tables associated with
  the devices instead so this driver does not need to keep
  supporting passing any GPIO numbers as platform data.

There is no stepwise approach as elegant as this, I
strongly prefer this big hammer over any antsteps for this
conversion. This way the old GPIO numbers go away and
NEVER COME BACK.

Special conversion for the different boards utilizing
I2C-GPIO:

- EP93xx (arch/arm/mach-ep93xx): pretty straight forward as
  all boards were using the same two GPIO lines, just define
  these two in a lookup table for "i2c-gpio" and register
  these along with the device. None of them define any
  other platform data so just pass NULL as platform data.
  This platform selects GPIOLIB so all should be smooth.
  The pins appear on a gpiochip for bank "G" as pins 1 (SDA)
  and 0 (SCL).

- IXP4 (arch/arm/mach-ixp4): descriptor tables have to
  be registered for each board separately. They all use
  "IXP4XX_GPIO_CHIP" so it is pretty straight forward.
  Most board define no other platform data than SCL/SDA
  so they can drop the #include of <linux/i2c-gpio.h> and
  assign NULL to platform data.

  The "goramo_mlr" (Goramo Multilink Router) board is a bit
  worrisome: it implements its own I2C bit-banging in the
  board file, and optionally registers an I2C serial port,
  but claims the same GPIO lines for itself in the board file.
  This is not going to work: there will be competition for the
  GPIO lines, so delete the optional extra I2C bus instead, no
  I2C devices are registered on it anyway, there are just hints
  that it may contain an EEPROM that may be accessed from
  userspace. This needs to be fixed up properly by the serial
  clock using I2C emulation so drop a note in the code.

- KS8695 board acs5k (arch/arm/mach-ks8695/board-acs5.c)
  has some platform data in addition to the pins so it needs to
  be kept around sans GPIO lines. Its GPIO chip is named
  "KS8695" and the arch selects GPIOLIB.

- PXA boards (arch/arm/mach-pxa/*) use some of the platform
  data so it needs to be preserved here. The viper board even
  registers two GPIO I2Cs. The gpiochip is named "gpio-pxa" and
  the arch selects GPIOLIB.

- SA1100 Simpad (arch/arm/mach-sa1100/simpad.c) defines a GPIO
  I2C bus, and the arch selects GPIOLIB.

- Blackfin boards (arch/blackfin/bf533 etc) for these I assume
  their I2C GPIOs refer to the local gpiochip defined in
  arch/blackfin/kernel/bfin_gpio.c names "BFIN-GPIO".
  The arch selects GPIOLIB. The boards get spiked with
  IF_ENABLED(I2C_GPIO) but that is a side effect of it
  being like that already (I would just have Kconfig select
  I2C_GPIO and get rid of them all.) I also delete any
  platform data set to 0 as it will get that value anyway
  from static declartions of platform data.

- The MIPS selects GPIOLIB and the Alchemy machine is using
  two local GPIO chips, one of them has a GPIO I2C. We need
  to adjust the local offset from the global number space here.
  The ATH79 has a proper GPIO driver in drivers/gpio/gpio-ath79.c
  and AFAICT the chip is named "ath79-gpio" and the PB44
  PCF857x expander spawns from this on GPIO 1 and 0. The latter
  board only use the platform data to specify pins so it can be
  cut altogether after this.

- The MFD Silicon Motion SM501 is a special case. It dynamically
  spawns an I2C bus off the MFD using sm501_create_subdev().
  We use an approach to dynamically create a machine descriptor
  table and attach this to the "SM501-LOW" or "SM501-HIGH"
  gpiochip. We use chip-local offsets to grab the right lines.
  We can get rid of two local static inline helpers as part
  of this refactoring.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Wu, Aaron <Aaron.Wu@analog.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-30 08:42:21 +01:00
Linus Walleij
186731145f hwmon: (sht15) Root out platform data
After finding out there are active users of this sensor I noticed:

- It has a single PXA27x board file using the platform data
- The platform data is only used to carry two GPIO pins, all other
  fields are unused
- The driver does not use GPIO descriptors but the legacy GPIO
  API

I saw we can swiftly fix this by:

- Killing off the platform data entirely
- Define a GPIO descriptor lookup table in the board file
- Use the standard devm_gpiod_get() to grab the GPIO descriptors
  from either the device tree or the board file table.

This compiles, but needs testing.

Cc: arm@kernel.org
Cc: Marco Franchi <marco.franchi@nxp.com>
Cc: Davide Hug <d@videhug.ch>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-10-29 18:36:03 -07:00
Linus Walleij
f3d0d8d938 mtd: nand: gpio: Convert to use GPIO descriptors
There is exactly one board in the kernel that defines platform data
for the GPIO NAND driver.

Use the feature to provide a lookup table for the GPIOs in the board
file so we can convert the driver as a whole to just use GPIO
descriptors.

After this we can cut the use of <linux/of_gpio.h> and use the GPIO
descriptor management from <linux/gpio/consumer.h> alone to grab and use
the GPIOs used in the driver.

I also created a local struct device *dev in the probe() function
because I was getting annoyed with all the &pdev->dev dereferencing.

Cc: arm@kernel.org
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: Gerhard Sittig <gsi@denx.de>
Cc: Jamie Iles <jamie.iles@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jamie Iles <jamie.iles@oracle.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-07 11:27:48 +02:00
Linus Torvalds
8fac2f96ab Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Low priority fixes and updates for ARM:

   - add some missing includes

   - efficiency improvements in system call entry code when tracing is
     enabled

   - ensure ARMv6+ is always built as EABI

   - export save_stack_trace_tsk()

   - fix fatal signal handling during mm fault

   - build translation table base address register from scratch

   - appropriately align the .data section to a word boundary where we
     rely on that data being word aligned"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8691/1: Export save_stack_trace_tsk()
  ARM: 8692/1: mm: abort uaccess retries upon fatal signal
  ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup
  ARM: align .data section
  ARM: always enable AEABI for ARMv6+
  ARM: avoid saving and restoring registers unnecessarily
  ARM: move PC value into r9
  ARM: obtain thread info structure later
  ARM: use aliases for registers in entry-common
  ARM: 8689/1: scu: add missing errno include
  ARM: 8688/1: pm: add missing types include
2017-09-12 06:10:44 -07:00
Linus Torvalds
a59e57da49 MTD changes for 4.14:
General updates:
  * Constify pci_device_id in various drivers
  * Constify device_type
  * Remove pad control code from the Gemini driver
  * Use %pOF to print OF node full_name
  * Various fixes in the physmap_of driver
  * Remove unused vars in mtdswap
  * Check devm_kzalloc() return value in the spear_smi driver
  * Check clk_prepare_enable() return code in the st_spi_fsm driver
  * Create per MTD device debugfs enties
 
 NAND updates, from Boris Brezillon:
  * Fix memory leaks in the core
  * Remove unused NAND locking support
  * Rename nand.h into rawnand.h (preparing support for spi NANDs)
  * Use NAND_MAX_ID_LEN where appropriate
  * Fix support for 20nm Hynix chips
  * Fix support for Samsung and Hynix SLC NANDs
  * Various cleanup, improvements and fixes in the qcom driver
  * Fixes for bugs detected by various static code analysis tools
  * Fix mxc ooblayout definition
  * Add a new part_parsers to tmio and sharpsl platform data in order to
    define a custom list of partition parsers
  * Request the reset line in exclusive mode in the sunxi driver
  * Fix a build error in the orion-nand driver when compiled for ARMv4
  * Allow 64-bit mvebu platforms to select the PXA3XX driver
 
 SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
  * add support to the JEDEC JESD216B specification (SFDP tables).
  * add support to the Intel Denverton SPI flash controller.
  * fix error recovery for Spansion/Cypress SPI NOR memories.
  * fix 4-byte address management for the Aspeed SPI controller.
  * add support to some Microchip SST26 memory parts
  * remove unneeded pinctrl header Write a message for tag:
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJZrav6Ixxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcABwkP/joDrq09RIC9n5gP+ubJe6O1jKvNWDd6bIVXD3Ke
 73R0a0ANwwWlNYWTChTdrb8UeewVS1bzutyy5O2Sbdb6Jc6s7xkfQDTsbET2HWOK
 S7Lt/zjlC6/6cow59B6h43PGS6wmIFaZD3K+70sGhvFnV8epVUzS2Aa783xS8LXm
 so2djZOdUYnW+yE0eho24VQR6nS4YP4Vc+7Mm9skjU0ifjB9mJiWRkzoQnqIgORO
 M+Iab+qjDs9KR/edWh6mZtnvjps0VSW4I40YsClpcgIn550w1DSXe4u6/8Nk+2Bp
 gfrALls91gob0ocxmEdIyLID+M0410HcN/Lvh36nw+tkkGTaXf0D6mkqzdKNrZ3w
 yz+UV9uf19kr1c6zFGcCvUlD0btn9KT+F2legnhgURtwUyDFQcaYQlkpDIeEzUMV
 ZrtzKbSE2v9810YKXjtCnseewdP+Eph/ewN6ODX5yg/fs8K0fyQYTRtYYM50U69X
 md8zznBBDPhJVu5T2Of7my9V1SxvCP8a7LrKjAXuFHpZ/CHiPe+QOWBgG2L+zXXT
 e10/rTg7T2pcyKpBvL/3/mCYeJ+Iup3lKT1EHGCXcKnLGecVgOsbvdG+JnvQMI2J
 FLmu1exvrzi0Gcrs/05hqwyUvkHZ5FB1a+heNOtmQ+h1U0ElXqILyu7brzghupRe
 3phO
 =UgCd
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "General updates:
   - Constify pci_device_id in various drivers
   - Constify device_type
   - Remove pad control code from the Gemini driver
   - Use %pOF to print OF node full_name
   - Various fixes in the physmap_of driver
   - Remove unused vars in mtdswap
   - Check devm_kzalloc() return value in the spear_smi driver
   - Check clk_prepare_enable() return code in the st_spi_fsm driver
   - Create per MTD device debugfs enties

  NAND updates, from Boris Brezillon:
   - Fix memory leaks in the core
   - Remove unused NAND locking support
   - Rename nand.h into rawnand.h (preparing support for spi NANDs)
   - Use NAND_MAX_ID_LEN where appropriate
   - Fix support for 20nm Hynix chips
   - Fix support for Samsung and Hynix SLC NANDs
   - Various cleanup, improvements and fixes in the qcom driver
   - Fixes for bugs detected by various static code analysis tools
   - Fix mxc ooblayout definition
   - Add a new part_parsers to tmio and sharpsl platform data in order
     to define a custom list of partition parsers
   - Request the reset line in exclusive mode in the sunxi driver
   - Fix a build error in the orion-nand driver when compiled for ARMv4
   - Allow 64-bit mvebu platforms to select the PXA3XX driver

  SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
   - add support to the JEDEC JESD216B specification (SFDP tables).
   - add support to the Intel Denverton SPI flash controller.
   - fix error recovery for Spansion/Cypress SPI NOR memories.
   - fix 4-byte address management for the Aspeed SPI controller.
   - add support to some Microchip SST26 memory parts
   - remove unneeded pinctrl header Write a message for tag:"

* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
  mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
  mtd: nand: make Samsung SLC NAND usable again
  mtd: nand: tmio: Register partitions using the parsers
  mfd: tmio: Add partition parsers platform data
  mtd: nand: sharpsl: Register partitions using the parsers
  mtd: nand: sharpsl: Add partition parsers platform data
  mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
  mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
  dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
  dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
  dt-bindings: qcom_nandc: fix the ipq806x device tree example
  mtd: nand: qcom: support for different DEV_CMD register offsets
  mtd: nand: qcom: QPIC data descriptors handling
  mtd: nand: qcom: enable BAM or ADM mode
  mtd: nand: qcom: erased codeword detection configuration
  mtd: nand: qcom: support for read location registers
  mtd: nand: qcom: support for passing flags in DMA helper functions
  mtd: nand: qcom: add BAM DMA descriptor handling
  mtd: nand: qcom: allocate BAM transaction
  mtd: nand: qcom: DMA mapping support for register read buffer
  ...
2017-09-09 14:48:21 -07:00
Russell King
e558bdc21a Merge branches 'fixes' and 'misc' into for-linus 2017-09-09 16:34:41 +01:00
Linus Torvalds
9d71941d39 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - a new GPIO bit-banging driver implementing PS/2 protocol

 - a new power key driver for Rockchip RK805 PMIC

 - bunch of patches constifying various device ID structures

 - Elan I2C touchpad driver now supports devices with 2 buttons

 - other assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (76 commits)
  Input: byd - make array seq static, reduces object code size
  Input: xilinx_ps2 - fix multiline comment style
  Input: pxa27x_keypad - handle return value of clk_prepare_enable
  Input: tegra-kbc - handle return value of clk_prepare_enable
  Input: PS/2 gpio bit banging driver for serio bus
  Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver
  Input: ambakmi - constify amba_id
  Input: atmel_mxt_ts - add support for reset line
  Input: atmel_mxt_ts - use more managed resources
  Input: wacom_w8001 - constify serio_device_id
  Input: tsc40 - constify serio_device_id
  Input: touchwin - constify serio_device_id
  Input: touchright - constify serio_device_id
  Input: touchit213 - constify serio_device_id
  Input: penmount - constify serio_device_id
  Input: mtouch - constify serio_device_id
  Input: inexio - constify serio_device_id
  Input: hampshire - constify serio_device_id
  Input: gunze - constify serio_device_id
  Input: fujitsu_ts - constify serio_device_id
  ...
2017-09-07 13:39:21 -07:00
Boris Brezillon
d1f936d736 This pull request contains the following core changes:
* Fix memory leaks in the core
 * Remove unused NAND locking support
 * Rename nand.h into rawnand.h (preparing support for spi NANDs)
 * Use NAND_MAX_ID_LEN where appropriate
 * Fix support for 20nm Hynix chips
 * Fix support for Samsung and Hynix SLC NANDs
 
 and the following driver changes:
 
 * Various cleanup, improvements and fixes in the qcom driver
 * Fixes for bugs detected by various static code analysis tools
 * Fix mxc ooblayout definition
 * Add a new part_parsers to tmio and sharpsl platform data in order to
   define a custom list of partition parsers
 * Request the reset line in exclusive mode in the sunxi driver
 * Fix a build error in the orion-nand driver when compiled for ARMv4
 * Allow 64-bit mvebu platforms to select the PXA3XX driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJZpwMZIxxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcAJEoP/jRnEjPznWT3+ngw6k/rnykkn/wexKV3iyX/6b71
 MQT/ZFuT3HsHnUjyprPvyRWJeKun6XyIH5fk7FlXIei9TaWCt6/UGTKousaPKeR2
 maggGeEjxGVpHJM/jpIYCyjt83zpezBqTupv52XhXxPaU7ROSpuHCd92YcPzIaT5
 tcn8JrI7TGuGlBrBbA2y8ZrPtuug3IKqUfpIiQmoqr0jzQR+AbZKHg0kk5a8piOn
 OguK67uhxeOvq831bGPehCPDbuE0loNi4CssayJ1HrisfS95kH/cqrveapgKsUG/
 fxaHh1i65I0lxa8sgUgeUiU04Zsy1YcgNbCj41AY4AHnjJ0+Qp1cV6KAB/x5/wH9
 ES/fW06how+1BLEeLvOr+rIQ41WeP0qV2H3r/PtkeswKKAV3gSERBXVHmg1E7Yum
 HkmPqzhu+nSk3mP7p3yxpd7EwWQh2xpvVYrfQ5vQbtdfm8Uw9n6S8x+O89ch9wWi
 +KbMWFsmF78nuRWW3WTsaiOFKcTRLBT5RoU2z4i9hCvQT2Pnx3SBhHrIj6xqBI1S
 8MpeDdlXHmRQfZxj+jDqU77JYqVEmy/5it9OjhjMpOqxfCf4K6Nlb75TEdR5Nh/9
 BA1qqTBEslg3UqS8ofGFHGFZWrW3JHf02SYo2zU9IvBninh3HrqHiFhBc3p1xNDE
 7GwD
 =bC1+
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/next

From Boris:
"
This pull request contains the following core changes:

* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs

and the following driver changes:

* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
  define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
"
2017-09-01 15:34:30 +02:00
Russell King
1abd350237 ARM: align .data section
Robert Jarzmik reports that his PXA25x system fails to boot with 4.12,
failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215:

   0xc0019e20 <+0>:     ldr     r1, [pc, ]
   0xc0019e24 <+4>:     ldr     r0, [r1]	<== here

with r1 containing 0xc06f82cd, which is the address of "clean_addr".
Examination of the System.map shows:

c06f22c8 D user_pmd_table
c06f22cc d __warned.19178
c06f22cd d clean_addr

indicating that a .data.unlikely section has appeared just before the
.data section from proc-xscale.S.  According to objdump -h, it appears
that our assembly files default their .data alignment to 2**0, which
is bad news if the preceding .data section size is not power-of-2
aligned at link time.

Add the appropriate .align directives to all assembly files in arch/arm
that are missing them where we require an appropriate alignment.

Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-08-14 16:22:55 +01:00
Boris Brezillon
d4092d76a4 mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Peter Pan <peterpandong@micron.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-08-13 10:11:49 +02:00
Arnd Bergmann
1d20d8a9fc ARM: pxa: select both FB and FB_W100 for eseries
We get a link error trying to access the w100fb_gpio_read/write
functions from the platform when the driver is a loadable module
or not built-in, so the platform already uses 'select' to hard-enable
the driver.

However, that fails if the framebuffer subsystem is disabled
altogether.

I've considered various ways to fix this properly, but they
all seem like too much work or too risky, so this simply
adds another 'select' to force the subsystem on as well.

Fixes: 82427de2c7 ("ARM: pxa: PXA_ESERIES depends on FB_W100.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27 22:57:55 +02:00
Arnd Bergmann
d997211e1e ARM: sa1100/pxa: fix MTD_XIP build
In commit 3169663ac5 "ARM: sa11x0/pxa: convert OS timer registers
to IOMEM", the definition of the OSCR macro was changed to be an
__iomem pointer, but the same register is also used by the XIP
code. This patch does the corresponding change here as well.

On PXA, the IRQ register definitions were removed even earlier, in
commit 5d284e353e ("ARM: pxa: avoid accessing interrupt registers
directly"). This patch unfortunately brings some of that back. An
earlier version of my patch moved the code into an external function,
which could not work for CONFIG_XIP_KERNEL+CONFIG_MTD_XIP, so this
restores something close to the original code.

Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-March/241716.html
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27 13:14:41 +02:00
Dmitry Torokhov
3dabc19acf ARM: pxa/raumfeld: mark rotary encoder properties as __initconst
device_add_properties() performs deep copy of supplied array of properties,
which means that we can discard the original array.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-25 13:37:14 -07:00
Linus Torvalds
c7d28eca1d This is the bulk of GPIO changes for the v4.13 series:
Core:
 - Export add/remove for lookup tables so that modules can export GPIO
   descriptor tables.
 - Handle GPIO sleep states: it is now possible to flag that a GPIO line
   may loose its state during suspend/resume of the system to save
   power. This is used in the Wolfson Micro Arizona driver.
 - ACPI-based GPIO was tightened up a lot around the edges.
 - Use bitmap_fill() to speed up a loop.
 
 New drivers:
 - Exar XRA1403 SPI-based GPIO.
 - MVEBU driver now supports Armada 7K and 8K.
 - LP87565 PMIC GPIO.
 - Renesas R-CAR R8A7743 (RZ/G1M).
 - The new IOT2040 8250 serial/GPIO also comes in through this
   changeset.
 
 Substantial driver changes:
 - Seriously fix the Exar 8250 GPIO portions to work.
 - The MCP23S08 was moved out to a pin control driver.
 - Convert MEVEBU to use regmap for register access.
 - Drop Vulcan support from the Broadcom driver.
 - Serious cleanup and improvement of the mockup driver, giving us a
   better test coverage.
 
 Misc:
 - Lots of janitorial clean up.
 - A bunch of documentation fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZX1MjAAoJEEEQszewGV1zEYUQALFsjJH7D2mRN4TSSEeVAcYr
 Uz52uupsou8tgW0IupRb/khO+V6zgd7j+kHDJLMxX+rCTw3pTq5+XGyi5+iNpxof
 TIIT1XBx4eq7Q/n4nWdGodHbHN9BXw7cGsNmTb1TS/G/6h1wOKxfzjvUNhDAC+2v
 idPy6B5G+WrDsYpBtTWlKHKQKVqbUlhLFyJYoglzqIeM5L9Ry/UoZ6sGleho3hKn
 Vlg/hMtkCexnVO9zopBe5CuEfseLrkcCgCvtQ713egzVXApryp4hqm3Xti20Ntgy
 OxnKhmVyloqd0kU0qLSpvDAf7B1invbHHbeZsag6wluTMrxgUYJONuonrqGeGiwB
 FBDtw9SGn2GlEXcs7sg8ANmAyr2XxxezKXD9XLBL5jadNB2KCY5yKMv1IK3VnYdq
 gEpFAiZ5cmlpZxIXqlyeZP6LKHNTci4amb33x1I/ghH2BTkGQ/3E3anXEbPNWF8G
 DDE6nrSgU0oQcNqRHyZaWNZpUIz4aFUgJtOEO4lYYP4+VzYSKTdrHseTiiJ91J7E
 WBz9p5JvSnB22+60RhyTAPjVjXgWa30nidf7WGCK0UHiIYffihCxGZRTlrhoEEUB
 fXgveJpqxLopYvxpUxi1OqlPYYo7zKRF5BzHsjKMpdVYXfdMdvs7eq2g/X889i1D
 WpbE9LyAH9FY5BM8YjFX
 =TpW1
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.13 series.

  Some administrativa:

  I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
  driver coming in through this tree, along with a whole bunch of Exar
  8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
  where they are ACKed by Andy Shevchenko.

  Speaking about drivers/platform/* there is also a bunch of ACPI stuff
  coming through that route, again ACKed by Andy.

  The MCP23S08 changes are coming in here as well. You already have the
  commits in your tree, so this is just a result of sharing an immutable
  branch between pin control and GPIO.

  Core:
   - Export add/remove for lookup tables so that modules can export GPIO
     descriptor tables.
   - Handle GPIO sleep states: it is now possible to flag that a GPIO
     line may loose its state during suspend/resume of the system to
     save power. This is used in the Wolfson Micro Arizona driver.
   - ACPI-based GPIO was tightened up a lot around the edges.
   - Use bitmap_fill() to speed up a loop.

  New drivers:
   - Exar XRA1403 SPI-based GPIO.
   - MVEBU driver now supports Armada 7K and 8K.
   - LP87565 PMIC GPIO.
   - Renesas R-CAR R8A7743 (RZ/G1M).
   - The new IOT2040 8250 serial/GPIO also comes in through this
     changeset.

  Substantial driver changes:
   - Seriously fix the Exar 8250 GPIO portions to work.
   - The MCP23S08 was moved out to a pin control driver.
   - Convert MEVEBU to use regmap for register access.
   - Drop Vulcan support from the Broadcom driver.
   - Serious cleanup and improvement of the mockup driver, giving us a
     better test coverage.

  Misc:
   - Lots of janitorial clean up.
   - A bunch of documentation fixes"

* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
  serial: exar: Add support for IOT2040 device
  gpio-exar/8250-exar: Make set of exported GPIOs configurable
  platform: Accept const properties
  serial: exar: Factor out platform hooks
  gpio-exar/8250-exar: Rearrange gpiochip parenthood
  gpio: exar: Fix iomap request
  gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
  serial: uapi: Add support for bus termination
  gpio: rcar: Add R8A7743 (RZ/G1M) support
  gpio: gpio-wcove: Fix GPIO control register offset calculation
  gpio: lp87565: Add support for GPIO
  gpio: dwapb: fix missing first irq for edgeboth irq type
  MAINTAINERS: Take maintainership for GPIO ACPI support
  gpio: exar: Fix reading of directions and values
  gpio: exar: Allocate resources on behalf of the platform device
  gpio-exar/8250-exar: Fix passing in of parent PCI device
  gpio: mockup: use devm_kcalloc() where applicable
  gpio: mockup: add myself as author
  gpio: mockup: improve the error message
  gpio: mockup: don't return magic numbers from probe()
  ...
2017-07-07 12:40:27 -07:00
Markus Elfring
ce3de60ff9 ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-06-14 08:32:21 +02:00
Markus Elfring
361f7cc7f3 ARM: pxa: Improve a size determination in pxa3xx_u2d_probe()
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-06-14 08:32:21 +02:00
Markus Elfring
c276557de3 ARM: pxa: Delete an error message for a failed memory allocation in pxa_pm_init()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-06-14 08:32:21 +02:00
Petr Cvek
7ade445c26 ARM: pxa: magician: Add support for ADS7846 touchscreen
This patch adds a support for ADS7846 touchscreen driver.

The basic functionality was tested, x_plate_ohms and y_plate_ohms were
physically measured. The value pressure_max was empirically set to match
the measured range, which is affected by x_plate_ohms and ADS samples.

The value of keep_vref_on should be set. A tested model (T-Mobile MDA
Compact PM10A) doesn't seem to use Vref pin as the input from an external
source. On this model the unset keep_vref_on cause high jitter of measured
values.

SPI framing pin (gpio_cs) must be used in GPIO mode due to an incompatible
autoframing of PXA27x controller and ADS7846 device.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-06-14 08:32:21 +02:00
Wolfram Sang
b6480faeee gpio: pcf857x: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23 11:35:02 +02:00
Wolfram Sang
0a848d638a gpio: max732x: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23 11:33:59 +02:00
Dmitry Torokhov
312ec92dae ARM: pxa/raumfeld: fix compile error in rotary controller resources
When switching rotary controlelr from plain IRQ number to IRQ resource, I
messed up the syntax.

Fixes: d422be5f62 ("Input: eeti_ts - expect platform code to set ... ")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-18 11:28:38 -07:00
Dmitry Torokhov
d99caa472c Input: eeti_ts - switch to gpiod API
gpiod API allows standard way of specifying GPIO polarity and takes it into
account when reading or setting GPIO state. It also allows us to switch to
common way of obtaining GPIO descriptor and away form legacy platform data.

Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05 08:52:33 -07:00
Dmitry Torokhov
d422be5f62 Input: eeti_ts - expect platform code to set interrupt trigger
Instead of keying interrupt trigger off GPIO polarity, let's rely on
platform code to set it up properly for us.

Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05 08:52:13 -07:00
Dmitry Torokhov
2d38849989 Input: eeti_ts - respect interrupt set in client structure
Instead of expecting that GPIO is always interrupt source, let's use
interrupt specified in I2C client.

Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03 16:24:33 -07:00
Linus Torvalds
d4f4cf77b3 Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:

 - nommu updates from Afzal Mohammed cleaning up the vectors support

 - allow DMA memory "mapping" for nommu Benjamin Gaignard

 - fixing a correctness issue with R_ARM_PREL31 relocations in the
   module linker

 - add strlen() prototype for the decompressor

 - support for DEBUG_VIRTUAL from Florian Fainelli

 - adjusting memory bounds after memory reservations have been
   registered

 - unipher cache handling updates from Masahiro Yamada

 - initrd and Thumb Kconfig cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: mm: round the initrd reservation to page boundaries
  ARM: mm: clean up initrd initialisation
  ARM: mm: move initrd init code out of arm_memblock_init()
  ARM: 8655/1: improve NOMMU definition of pgprot_*()
  ARM: 8654/1: decompressor: add strlen prototype
  ARM: 8652/1: cache-uniphier: clean up active way setup code
  ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
  ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
  ARM: 8649/2: nommu: remove Hivecs configuration is asm
  ARM: 8648/2: nommu: display vectors base
  ARM: 8647/2: nommu: dynamic exception base address setting
  ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
  ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
  ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
  ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
  ARM: 8639/1: Define KERNEL_START and KERNEL_END
  ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
  ARM: 8637/1: Adjust memory boundaries after reservations
  ARM: 8636/1: Cleanup sanity_check_meminfo
  ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support
  ...
2017-02-28 11:50:53 -08:00
Florian Fainelli
64fc2a947a ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
All low-level PM/SMP code using virt_to_phys() should actually use
__pa_symbol() against kernel symbols. Update code where relevant to move
away from virt_to_phys().

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-02-28 11:06:10 +00:00
Linus Torvalds
6ae52c65e0 ARM: SoC platform updates
In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e.
 C code changes for SoC platforms. This release cycle the diffstat is quite
 nice, in that we're removing 3x the amount of code that's being added.
 
 The main reason for this is that there's a removal of camera drivers for
 Freescale i.MX chips (driver was removed so the device registration isn't
 needed any more). There's also removal of display initialization code for OMAP
 that is no longer needed.
 
 The rest are mostly minor tweaks and cleanups; constification on Samsung
 platforms, cleanup of ux500 platform data, purge of other unused platform
 data/device seutp on i.MX and other good stuff.
 
 New SoC support this cycle is for two Allwinner platforms, H2+ and V3s.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrMs4AAoJEIwa5zzehBx34LQP/j/pzJOw2cLr0iiHwNl/3jyC
 XFt/F6NFfPuBOCldUoMsZzD2lOR1Qbhp96fAQtDzs/HkGRVxokcHRVJC1QWozSkt
 18wm8tc4HtLvjWoeXyh3zFvwl4wiqx4d4r4yxw1wZKA0uhEXrSNJu4P/RgtXH4SK
 TycfodE35kJ8wCxLNXYr1vaAMKgjmBkk8DAQa5t6XXBnSLGJmNAa5+vCJKab1im+
 9mOZ1EigtrkRR6eL6OJmru3MaZYLg7q+oxq5i/5NOIOZsCWq6Wk4r+5HnTg+8aVf
 QVs766sEjwZJ5ozZYhYucp8pvQhyatG36vwB51x1XlTA4XzAJwMEgPAtb5Pc/owU
 cst8d4m24Gc7oChcxlbmrqK64hpF1s5LK/ZbfdLPHaK1PS/ng/teHfVA2Q2HXwur
 HcHA8dDqgTVCNcCpLX1OgBUbq9S0aopuL9bdeg6q6fU8Skb49BmeHK2Iji3MZSkO
 8XdY8H7oKtkwLFx18GJzmdXtH55vIXpHYMvgpjMaWAujtoqZCZ7+GHCmM3GyNCrF
 +KzJMVdx1lg6yYhfo4rZBWGzK2CrHvq5u5Vq7GExxhVCPsOx3mRQQ0JY/adGWU/y
 WTCbogwxUNbjlugffwQa+dYdF2KU2kAHAyEFDITndZmp60xJohWPYVJw+7imF5wR
 0Qbcj6OvffBcaTdxKzTE
 =YE8v
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...
2017-02-23 15:33:54 -08:00
Ulf Hansson
40d727a2de ARM: pxa: Don't rely on public mmc header to include leds.h
Some of the pxa platforms, balloon3, colibri-pxa270-income, corgi,
trizeps4, vpac270, zeus and zylonite depends on leds.h. Explicitly include
it instead of relying on the public mmc header host.h.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-02-13 13:20:17 +01:00
Arnd Bergmann
9315e63d3c ARM: pxa: include linux/leds.h
When the header is not included implicitly, we get a build failure:

arch/arm/mach-pxa/idp.c:205:22: error: field 'cdev' has incomplete type
  struct led_classdev     cdev;

This adds an explicit #include.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-01-18 19:21:17 +01:00
Arnd Bergmann
67af5ebde1 ARM: pxa: ezx: fix a910 camera data
The camera_supply_dummy_device definition is shared between a780 and a910,
but only provided when the first is enabled and fails to build for a
configuration with only a910:

arch/arm/mach-pxa/ezx.c:1097:3: error: 'camera_supply_dummy_device' undeclared here (not in a function)

This moves the definition into its own section.

Fixes: 6c1b417adc ("ARM: pxa: ezx: use the new pxa_camera platform_data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-01-18 19:12:55 +01:00
Linus Torvalds
e79ab194d1 ARM: SoC platform updates for v4.10
These are updates for platform specific code on 32-bit ARM machines,
 essentially anything that can not (yet) be expressed using DT files.
 
 Noteworthy changes include:
 
 - Added support for the TI DRA71x family of SoCs in mach-omap2,
   this is an new variant of the the DRA72x/DRA74x automotive
   infotainment chips we already supported for a while.
 
 - Added support for the ST STM32F746 SoC, the first Cortex-M7
   based microcontroller we support, related to the smaller
   STM32F4 family.
 
 - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile,
   see http://elinux.org/RZ-G
 
 - SMP is now supported on the OX820 platform
 
 - A lot of code in mach-omap2 gets removed as a follow-up to
   removing support for board files in the previous release
 
 - Davinci has some new work to improve USB support
 
 - For i.MX, the performance monitor now supports profiling the
   memory controller using 'perf'
 
 Conflicts:
 arch/arm/mach-shmobile/setup-rcar-gen2.c: rcar_gen2_clocks_init()
 is gone, calling of_clk_init(NULL) is sufficient now.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMS9WCrR//JCVInAQIG+Q/7BElvubqO/Cc/VEAyoB5iF9OB9wPD2t5p
 O0KwtrTtzqJZJNGTmPiesR4DMZH07O1XoW8HqvBPeXtB7/t0tmOegwK+WABbpkSE
 ZQgUjtrIGwteJXYqU2BbhooO8G6mEsfWaqdGX8ZiIk40fPhMN6536lG+JA8DV7uv
 ckAPHCZkIf34lDtwljN97Cvj1TT9lBFp04bx7alKqfg1IMV+iMSxvSRHuuFlxRCk
 kzwVXDmFlZLmueU2KbQXTuOUrvehIGlZ/X5QWlxfrjwCwnOvr54p8WDoVWu2UkHm
 Dc8BVfsBny8mCZJRzfDD1S0PD0mWn1msdOhRb4VRzsC9DnRI4qbL0/Hstu8A7yUQ
 kBtMyVtFTzvRSclABbHHN6Mnm37AyNwSIKIB8h2U1m7YHqZGwHLaflVT5sf3tl7m
 4arTVqHtR8oSU5G5a2FTznMM2rfIx4LcCBbLQxWqzmO4Qrh4j6t7c2i7+VTfFAja
 0bToLgTArKK/cep6PWeBnMH14nzlXoKtBf2T8qwQPuAmLKy9E0ZduLKZ01B/nqrj
 OXcsnG0OUuqU4RgbIaDssRU4ohKIk8JcAl60TdRFhzj+/LTbeMaWVwbWuQS+iHd3
 zfzGUoUIhElx0vHt6ghR0BYQadszb1z9V0NEs3UM0v5cWlNodX//3okH8lZmSW6w
 +fO4dSnIKIA=
 =BF6Y
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...
2016-12-15 15:39:02 -08:00
Robert Jarzmik
e413bd33ac ARM: pxa: fix pxa25x interrupt init
In the device-tree case, the root interrupt controller cannot be
accessed through the 6th coprocessor, contrary to pxa27x and pxa3xx
architectures.

Fix it to behave as in non-devicetree builds.

Fixes: 32f17997c1 ("ARM: pxa: remove irq init from dt machines")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-11-05 21:48:18 +01:00
Wei Yongjun
f2131c5436 ARM: pxa: remove duplicated include from spitz.c
This partially reverts commit 12beb34671 ("Merge tag 'pxa-fixes-v4.8'
of https://github.com/rjarzmik/linux into randconfig-4.8").

This former patch introduced accidentally a double include of module.h.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
[amended commit message and 2 comments]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-11-02 22:44:51 +01:00
Robert Jarzmik
d9fa04725f ARM: pxa: em-x270: use the new pxa_camera platform_data
pxa_camera has transitioned from a soc_camera driver to a standalone
v4l2 driver. Amend the device declaration accordingly.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-10-29 21:40:12 +02:00
Robert Jarzmik
6c1b417adc ARM: pxa: ezx: use the new pxa_camera platform_data
pxa_camera has transitioned from a soc_camera driver to a standalone
v4l2 driver. Amend the device declaration accordingly.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-10-29 14:05:21 +02:00
Robert Jarzmik
4ebfcdee81 ARM: pxa: mioa701: use the new pxa_camera platform_data
pxa_camera has transitioned from a soc_camera driver to a standalone
v4l2 driver. Amend the device declaration accordingly.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-10-29 14:05:18 +02:00
Robert Jarzmik
9a97434215 ARM: pxa: enhance smc91x platform data
Instead of having the smc91x driver relying on machine_is_*() calls,
provide this data through platform data, ie. idp, mainstone and
stargate.

This way, the driver doesn't need anymore machine_is_*() calls, which
wouldn't work anymore with a device-tree build.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 14:14:20 -04:00
Robert Jarzmik
3738ca1b2a ARM: pxa: pxa_cplds: honor probe deferral
The method to acquire the input interrupt was working in a platform data
based board, but was failing in a device-tree one when the gpio
controller was probed after pxa_cplds.

Use platform_get_irq() to benefit from the probe deferral
mechanism. Moreover, as seen in dm9000.c development, platform_get_irq()
doesn't honor the irq type IO resource (ie. edge rising for example),
and it must be passed again at irq request in a not device-tree build,
hence the irq_get_trigger_type() call.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-10-18 09:12:37 +02:00
Robert Jarzmik
d3570e3c50 ARM: sa11x0/pxa: get rid of get_clock_tick_rate
The last user of this function is gone, so remove it. The clock API
should now be used to get clock rates.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18 09:12:37 +02:00
Robert Jarzmik
f4e14edf25 ARM: sa11x0/pxa: acquire timer rate from the clock rate
As both pxa and sa1100 provide a clock to the timer, the rate can be
inferred from the clock rather than hard encoded in a functional call.

This patch changes the pxa timer to have a mandatory clock which is used
as the timer rate.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18 09:12:36 +02:00
Linus Torvalds
66f2c6d952 ARM: SoC platform updates for v4.9
These are updates for platform specific code on 32-bit ARM machines,
 essentially anything that can not (yet) be expressed using DT files.
 
 Noteworthy changes include:
 
 - We get support for running in big-endian mode on two platforms:
   sunxi (Allwinner) and s3c24xx (old Samsung).
 
 - The recently added Uniphier platform now uses standard PSCI
   methods for SMP booting and we remove support for old bootloader
   versions that did not support it yet.
 
 - In sunxi, we gain support for the "Nextthing GR8" SoC, which
   is a close relative of the Allwinner A13 and R8 chips.
 
 - PXA completes its move over to the generic dmaengine framework
   and removes its old private API
 
 - mach-bcm gains support for BCM47189/BCM53573, their first ARM
   SoC with integrated 802.11ac wireless networking.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gUVGCrR//JCVInAQKoyA/8DeV4M2IL/csGvnDwroH8rjDCvdeVDG0b
 QhwtoIoy5Ur85fjZKsIJnu+8lZyB9Kun5p9mrjGsl1fo2PMjNKkOIN2BvV2r35Bo
 kcpogVbOzFBJ3decX2QlQ41hhZaFphGWt21oBtslDabRBMyDxsRrv10Qy1gazw6F
 aDwvSYUarUajtYq4tDli1mFbj6Tu5YZgL/mRWjEwM7fy4AE9MBd/R7/dAYGF6n7v
 LF4l46k4ZIWl1txFcTJ84fV1ugf0O1f0j3umpaRo3QFWonFXmEkFqkyVPZmfoqPf
 Q0MvLOZEOImA3UH1njpPV4PsZiDuA/aPuKYrV3aCfAcpKTvkWL5AJrc8YCBv3x/m
 rOeLC3EKKj7u0IBoIW4YjzFngMkLthrYQ4Mz2URa0CJNwnW3GK1HswmU8wvpF73p
 AMXxfpIjcf7tkauxMX3HOIltWa6DAa5C19lqKhiRzdwm884ZSJ3BRIswh1SHA4bz
 f9h80FhI9GisfUL8k+axTtI5nsaLc6fzT4rCbQlp/WyeWFODEycx9T0mhvzd9Adc
 7vEvAssh21x4AyZmfcKwb/7xsX15zN+dkB9AuX21ssmOvZ2Tb1zYYHItp0xtEi3R
 5hL/8TRAHyUgyDq6MBQyg3EOSW6A+IqrVPRi10ND5q8+dK9Xh1bx08Wp3fZRQMHw
 cBAWWa7pQLM=
 =y4XF
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - We get support for running in big-endian mode on two platforms:
     sunxi (Allwinner) and s3c24xx (old Samsung).

   - The recently added Uniphier platform now uses standard PSCI methods
     for SMP booting and we remove support for old bootloader versions
     that did not support it yet.

   - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a
     close relative of the Allwinner A13 and R8 chips.

   - PXA completes its move over to the generic dmaengine framework and
     removes its old private API

   - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC
     with integrated 802.11ac wireless networking"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: imx legacy: pca100: move peripheral initialization to .init_late
  ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
  ARM: imx legacy: pcm043: move peripheral initialization to .init_late
  ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
  ARM: imx legacy: vpr200: move peripheral initialization to .init_late
  ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
  ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
  ARM: imx legacy: qong: move peripheral initialization to .init_late
  ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: pcm037: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
  ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
  ARM: imx legacy: kzm: move peripheral initialization to .init_late
  MAINTAINERS: update list of Oxnas maintainers
  ARM: orion5x: remove extraneous NO_IRQ
  ARM: orion: simplify orion_ge00_switch_init
  ...
2016-10-07 21:18:42 -07:00
Linus Torvalds
6a497e9d58 This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
 
 - Do away with the last users of the obsolete Kconfig options
   ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
   always sounded like an item on a wishlist to Santa Claus to
   me). We can now select GPIOLIB and be done with it, for all
   archs. After some struggle it even work on UM. Not that it has
   GPIO, but if it wants to, it can select the library.
 
 - Continued efforts to make drivers properly either tristate or
   bool.
 
 - Introduce a warning for drivers assigning default triggers to
   their irqchip lines when probed from device tree, so we find and
   fix these ambigous drivers. It is agreed that in the OF config
   path, the device tree defines trigger characteristics.
 
 - The same warning, mutatis mutandis, for ACPI-probed GPIO
   irqchips.
 
 - We introduce the ability to mark certain IRQ lines as "unusable"
   as they can be taken by BIOS/firmware, unrouted in silicon and
   generally nasty if you use them, and such things. This is
   put to good use in the STMPE driver and also in the Cherryview
   pin control driver.
 
 - A new "mockup" virtual GPIO device that can be used for testing.
   The plan is to add unit tests under tools/* for exercising this
   device and verify that the kernel code paths are working as they
   should.
 
 - Make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
   implicit all the time, but when people started building UM
   with allyesconfig or allmodconfig it exploded in their face.
 
 - Move some stray bits of device tree and ACPI HW description
   callbacks down into their respective implementation silo. These
   were causing issues when compiling on !HAS_IOMEM as well, so
   now eventually UM compiles the GPIOLIB library if it wants to.
 
 New drivers:
 
 - New driver for the Aspeed GPIO front-end companion to the
   pin controller merged through the pin control tree.
 
 - New driver for the LP873x PMIC GPIO portions.
 
 - New driver for Technologic Systems' I2C FPGA GPIO such as
   TS4900, TS-7970, TS-7990 and TS-4100.
 
 - New driver for the Broadcom BCM63xx series including BCM6338
   and BCM6345.
 
 - New driver for the Intel WhiskeyCove PMIC GPIO.
 
 - New driver for the Allwinner AXP209 PMIC GPIO portions.
 
 - New driver for Diamond Systems 48 line GPIO-MM, another of
   these port-mapped I/O expansion cards.
 
 - Support the STMicroelectronics STMPE1600 variant in the STMPE
   driver.
 
 Driver improvements:
 
 - The STMPE driver now supports rising/falling edge detection
   properly for IRQs.
 
 - The PCA954x will now fetch and enable its VCC regulator properly.
 
 - Major rework of the PCA953x driver with the goal of eventually
   switching it over to use regmap and thus modernize it even more.
 
 - Switch the IOP driver to use the generic MMIO GPIO library.
 
 - Move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
   over to this subsystem from MFD, achieveing some separation of
   concerns.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX9OvDAAoJEEEQszewGV1zsPQP/3VLy1fNIpMF0DDyq5tA/GNv
 sinnaPgMtt+qBrM2sbJcTVwV9xtHrs12CC3+2lAhBCIEm4YfHbXvaUMNE+aKJzk4
 ZM7/rb8WMUxjQqzDKStdETsQGo6fxh0qU81OEQNbX9alir20jik9DvTufcs6xCgx
 sqh8KsNGO4Y6tiuKZ6mTZvIjVhMwiTm0NBSDKhdim0DdsOcuxyh6xVOj/0LB2Ei6
 g75X1w++wjh0ryY3bzaeWkQSlXDC6eEKeez7VaEkSUyrxH86buomy0+aP0fqs7vY
 LRZzn/TC97YLT6hslS/OhB7uXrDIY2POSwO/SvusJcveGP7WPGyGr5mDtA4ATRWI
 ios0DBWl629kHfhAMzg3kPJS8LfjCerapvtbdAgqvhH+Vb5IPFx45vypDkR2WtJ7
 bNAySIRMQSHZvJSCvYzjqh8AbWdE4i4k70tFXRMOpWeKIvRVI1cDvLD6cLn3hATM
 IPTytM6i2xqnzcq7mK7EJ18afcR0mv1jHgGAv4M0RMkyJ2IrURvFyZIvUB2MTyuL
 PEBh1ZvTs+MO50eeFwzltY91eagkzgWB0f6sm3l7I7bL2oxE2f/WVcVL9jWbgwpF
 otjFO27u0/6rIulfLUQzDo3gbOq7UaN0VTW4E9CYbOtFtNzCxjFIKTv0IJhTu4TT
 OSur7oFpzAMOGYlpYP8j
 =ABbi
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...
2016-10-05 11:49:09 -07:00
Linus Walleij
ac2a8bca03 Merge branch 'ib-move-htc-egpio' into devel 2016-09-28 09:30:21 -07:00