savedefconfig will save a minimal config to a file
named "defconfig".
The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.
The implementation was tested against several minimal
configs for arm which was created using brute-force.
There was one regression related to default numbers
which had their valid range further limited by another symbol.
Sample:
config FOO
int "foo"
default 4
config BAR
int "bar"
range 0 FOO
If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.
This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
alldefconfig create a configuration with all values set
to their default value (form the Kconfig files).
This may be useful when we try to use more sensible default
values and may also be used in combination with
the minimal defconfigs.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Rename to a name that better match the other kconfig targets.
listnewconfig shall read as:
- list new options compared to current configuration
New options are now written to stdout so one can redirect the output.
Do not exit with an error code if there is new options.
These are feature changes compared to the original
nonint_oldconfig - but as this feature has not yet been in a
released kernel it should not matter.
It is still possible to do:
make listnewconfig
lookup new config options in Kconfig*
edit .config
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Rename target to something that fall more in line
with the other kconfig targets.
oldnoconfig shall read as:
- read the old configuration and set all new options to no
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The list of options supported by conf is growing
and their abbreviation did not resemble anything usefull.
So drop the single letter options in favour of long options.
The long options are named equal to what we know from
the make target.
The internal implmentation was changed to match this,
resulting in much more readable code.
Support for short options is dropped - no one is supposed
to call this program direct anyway.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Not sure if this is correct or not, but with
make menuconfig
HOSTCC scripts/kconfig/conf.o
scripts/kconfig/conf.c: In function 'conf_sym':
scripts/kconfig/conf.c:159:6: warning: variable 'type' set but not used
scripts/kconfig/conf.c: In function 'conf_choice':
scripts/kconfig/conf.c:231:6: warning: variable 'type' set but not used
HOSTLD scripts/kconfig/mconf
I get this using gcc 4.6.0 the below change fixes this form me.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This patch has been around for a long time in Fedora and Red Hat Enterprise
Linux kernels and it may be useful for others. The nonint_oldconfig target
will fail and print the unset config options while loose_nonint_oldconfig will
simply let the config option unset. They're useful in distro kernel packages
where the config files are built using a combination of smaller config files.
Arjan van de Ven wrote the initial nonint_config and Roland McGrath added the
loose_nonint_oldconfig.
Signed-off-by: Arjan van de Ven <arjan@redhat.com> [defunct email]
Whatevered-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
[mmarek: whitespace fixes]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Warnings found via gcc -Wmissing-prototypes.
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rather than hardcoding ".config" use conf_get_configname(), which also
respects the environment variable KCONFIG_CONFIG.
This fixes "make silentoldconfig" when KCONFIG_CONFIG is used and also
suggests the given filename for "Load" and "Save as" in qconf.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
'make randconfig' uses glibc's rand function, and the seed of
that PRNG is set via:
srand(time(NULL));
But 'time()' only increases once every second - freezing the
randconfig result within a single second.
My Nehalem testbox does randconfig much faster than 1 second
and i have a few scripts that do 'randconfig until condition X'
loops.
Those scripts currently waste a lot of CPU time due to randconfig
changing its seed only once per second currently.
Change the seed to be micrseconds based. (I checked the statistical
spread of the seed - the now.tv_sec*now.tv_usec multiplication
there further improves it.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
[sam: fix for systems where usec is zero - noticed by Geert Uytterhoeven]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Recent changes to oldconfig have mixed up the silentoldconfig handling,
so this fixes that by clearly separating that special mode, e.g.
KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as
needed.
This will also properly close Bug 11230.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Always write out .config also in the case where config
did not change.
This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
make defconfig generated a lot of output
then noone actually read.
Use conf_set_all_new_symbols() to generate the default
configuration and avoid the chatty output.
A typical run now looks like this:
$ make defconfig
*** Default configuration is based on 'i386_defconfig'
arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS
arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL
...
arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION
$
As an added benefit we now clearly see the warnings generated
in the start of the process.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Previously when running "make oldconfig" we saw all the propmt lines
from kconfig and noone actully read this.
With this patch the user will only see output if there is new symbols.
This will be seen as "make oldconfig" runs which does not generate any output.
A typical run now looks like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
$
If a new symbol is found then we restart the config process like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Local version - append to kernel release (LOCALVERSION) []
...
The bahaviour is similar to what we know when running the implicit
oldconfig target "make silentoldconfig".
"make silentoldconfig" are run as part of the kernel build process
if the configuration has changed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Drop the chatty mode when we generate the all*config, randconfig
configurations.
Ths speeds up the process considerably and noone looked
at the output anyway.
This patch uses the conf_set_all_new_symbols() function
just added to kconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Change kconfig behavior so that mixing bool and tristate config
settings in a choice is possible and has the desired effect of offering
just the tristate options individually if the choice gets set to M, and
a normal boolean selection if the choice gets set to Y.
Also fix scripts/kconfig/conf's handling of children of choice values -
there may be more than one immediate child, and all of them need to be
processed.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: "Roman Zippel" <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Gettext support for conf.c
[Include locale.h by Kyle].
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
rand and srand functions conform also to C89 in addition to POSIX.1-2001,
which makes them a bit more portable (work also on MinGW host). Linux man
page also says:
"The versions of rand() and srand() in the Linux C Library use the same
random number generator as random() and srandom()".
* Use C89 conformant functions rand() and srand()
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Sort includes and remove leading whitespace.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org
Switch from doing our own parsing of command line arguments to
using getopt(3) to do it. Aside from simplifying things, this allows us to
specify multiple arguments; the old code could only accept two arguments
(input_mode and kconfig name).
Note some subtle changes:
- The argument '-?' is no longer supported.
- '-h' is not treated as an error, so output goes to stdout, and we
exit with '0'.
- There is no compatibility checking amongst arguments; the last option
will simply override earlier options. For example, 'conf -n -y foo'
is perfectly valid now (input_mode will be set_yes). Previously, that
would have been an error ("can't find file -y").
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options
are clobbered. As recommended by Roman, this adds an is_new test to see
whether to select a new option or obey the existing one.
This is a resend of the earlier patch a couple of weeks ago, since there
was no reply. Original thread is at http://lkml.org/lkml/2007/11/28/94
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.
For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)
The patch reverts these commits:
- 0f855aa64b ("kconfig: add helper to set
config symbol from environment variable")
- 2a113281f5 ("kconfig: use $K64BIT to
set 64BIT with all*config targets")
Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.
With this patch we have following behaviour:
# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit
The general rule are that ARCH= and native architecture takes
precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says. The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.
This behaviour is consistent with previous behaviour so no
suprises here.
make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable K64BIT can now be used to select the
value of CONFIG_64BIT.
This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n
To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Avoid setting the value if the symbol doesn't need to be changed or can't
be changed. Later choices may change the dependencies and thus the
possible input range.
make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set
was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking,
even when there was no actual requirement for CONFIG_HOTPLUG_CPU.
This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.
This patch does this and at the same time introduce a few API
funtions used to access the help text.
The relevant api functions are introduced in the various frontends.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk
icon of the qt application, that has just started: Its in a normal, active
state.
Mouse click on it: .config is being saved.
This patch series changes things so taht
after the mouse click on the floppy disk icon, the icon is greyed out.
If you mouse click on it now, nothing happens.
If you change some CONFIG_*, the floppy disk icon returns to "active state",
that is, if you mouse click it now, .config is written.
This patch:
Returns sym_change_count to reflect the .config's change state.
All read only accesses of
sym_change_count
are replaced by calls to
conf_get_changed()
.
mconfig.c is manipulated to ask for saving only when
conf_get_changed() returned true.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the beginning Kconfig file is missing, config segfaults so it might as
well exit after the error message.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Extend conf_read_simple() so it can load multiple configurations.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This fixes one of the worst kbuild warts left - the broken dependencies used
to check and regenerate the .config file. This was done via an indirect
dependency and the .config itself had an empty command, which can cause make
not to reread the changed .config file.
Instead of this we generate now a new file include/config/auto.conf from
.config, which is used for kbuild and has the proper dependencies. It's also
the main make target now for all files generated during this step (and thus
replaces include/linux/autoconf.h).
This also means we can now relax the syntax requirements for the .config file
and we don't have to rewrite it all the time, i.e. silentoldconfig only
writes .config now when it's necessary to keep it in sync with the Kconfig
files and even this can be suppressed by setting the environment variable
KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Replace outdated help message with a reference to README. Update README
for make *config variants and environment variable info.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After the last patch fixed the real problem, revert this needless behaviour
change of conf, which only hid the real problem.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The wrong default value can cause conf to end up in endless loop for choice
questions.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Allow to force setting of config variables during all{no,mod,yes,random}config
to a specific value. For that conf first checks the KCONFIG_ALLCONFIG
environment variable for a file name, otherwise it checks for
all{no,mod,yes,random}.config and all.config. The file is a normal config
file, which presets the config variables, but they are still subject to normal
dependency checks.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The restart check whether new symbols became visible, didn't always work for
choice symbols. Even if a choice symbol itself isn't changable, the childs
are. This also requires to update the new status of all choice values, once
one of them is set.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
scripts/ is full of mismatches between char* params an signed char* arguments,
and viceversa. gcc4 now complaints loud about this. Patch below deletes all
those 'signed'.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds i18n support for make *config, allowing users to have the
config process in their own language.
No printk was harmed in the process, don't worry, so all the bug reports,
kernel messages, etc, remain in english, just the user tools to configure
the kernel are internationalized.
Users not interested in translations can just unset the related LANG,
LC_ALL, etc env variables and have the config process in plain english,
something like:
LANG= make menuconfig
is enough for having the whole config process in english. Or just don't
install any translation file.
Translations for brazilian portuguese are being done by a team of
volunteers at:
http://www.visionflex.inf.br/kernel_ptbr/pmwiki.php/Principal/Traducoes
To start the translation process:
make update-po-config
This will generate the pot template named scripts/kconfig/linux.pot,
copy it to, say, ~/es.po, to start the translation for spanish.
To test your translation, as root issue this command:
msgfmt -o /usr/share/locale/es/LC_MESSAGES/linux.mo ~/es.po
Replace "es" with your language code.
Then execute, for instance:
make menuconfig
The current patch doesn't use any optimization to reduce the size of the
generated .mo file, it is possible to use the config option as a key, but
this doesn't prevent the current patch from being used or the translations
done under the current scheme to be in any way lost if we chose to do any
kind of keying.
Thanks to Fabricio Vaccari for starting the pt_BR (brazilian portuguese)
translation effort, Thiago Maciera for helping me with the gconf.cc (QT
frontent) i18n coding and to all the volunteers that are already working on
the first translation, to pt_BR.
I left the question on whether to ship the translations with the stock kernel
sources to be discussed here, please share your suggestions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org
Signed-off-by: Andrew Morton <akpm@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
