mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 11:35:07 +07:00
c69be946d6
11314 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David S. Miller
|
53954cf8c5 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
9a431ef962 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Check iwlwifi 9000 reorder buffer out-of-space condition properly,
from Sara Sharon.
2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov
Kasiviswanathan.
3) Fix session and tunnel release races in l2tp, from Guillaume Nault
and Sabrina Dubroca.
4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter.
5) Several mlx5 driver fixes from the Mellanox folks (max flow counters
cap check, invalid memory access in IPoIB support, etc.)
6) tun_get_user() should bail if skb->len is zero, from Alexander
Potapenko.
7) Fix RCU lookups in inetpeer, from Eric Dumazet.
8) Fix locking in packet_do_bund().
9) Handle cb->start() error properly in netlink dump code, from Jason
A. Donenfeld.
10) Handle multicast properly in UDP socket early demux code. From Paolo
Abeni.
11) Several erspan bug fixes in ip_gre, from Xin Long.
12) Fix use-after-free in socket filter code, in order to handle the
fact that listener lock is no longer taken during the three-way TCP
handshake. From Eric Dumazet.
13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov.
14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
net: 8021q: skip packets if the vlan is down
bpf: fix bpf_tail_call() x64 JIT
net: stmmac: dwmac-rk: Add RK3128 GMAC support
rndis_host: support Novatel Verizon USB730L
net: rtnetlink: fix info leak in RTM_GETSTATS call
socket, bpf: fix possible use after free
mlxsw: spectrum_router: Track RIF of IPIP next hops
mlxsw: spectrum_router: Move VRF refcounting
net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'
net: mvpp2: Fix clock resource by adding an optional bus clock
r8152: add Linksys USB3GIGV1 id
l2tp: fix l2tp_eth module loading
ip_gre: erspan device should keep dst
ip_gre: set tunnel hlen properly in erspan_tunnel_init
ip_gre: check packet length and mtu correctly in erspan_xmit
ip_gre: get key from session_id correctly in erspan_rcv
tipc: use only positive error codes in messages
ppp: fix __percpu annotation
udp: perform source validation for mcast early demux
IPv4: early demux can return an error code
...
|
||
|
Linus Torvalds
|
42b76d0e6b |
ARM: SoC fixes for 4.14-rc
Our first batch of fixes this release cycle, unfortunately a bit noisier
than usual. Two major groups stand out:
- Some pinctril dts/dtsi changes for stm32 due to a new driver being
merged during the merge window, and this aligns the DT contents between
the old format and the new. This could arguably be moved to the next
merge window but it also seemed relatively harmless to include now.
- Amlogic/meson had driver changes merged that required devicetree
changes to avoid functional/performance regressions. I've already
asked them to be more careful about this going forward, and making
sure drivers are compatible with older DTs when they make these kind
of changes. The platform is actively being upstreamed so there's a
few things in flight, we've seen this happen before and sometimes
it's hard to catch in time.
Besides that there is the usual mix of minor fixes.
-----BEGIN PGP SIGNATURE-----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=/0Nj
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Our first batch of fixes this release cycle, unfortunately a bit
noisier than usual. Two major groups stand out:
- Some pinctril dts/dtsi changes for stm32 due to a new driver being
merged during the merge window, and this aligns the DT contents
between the old format and the new. This could arguably be moved to
the next merge window but it also seemed relatively harmless to
include now.
- Amlogic/meson had driver changes merged that required devicetree
changes to avoid functional/performance regressions. I've already
asked them to be more careful about this going forward, and making
sure drivers are compatible with older DTs when they make these
kind of changes. The platform is actively being upstreamed so
there's a few things in flight, we've seen this happen before and
sometimes it's hard to catch in time.
Besides that there is the usual mix of minor fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
ARM: dts: stm32: use right pinctrl compatible for stm32f469
ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
ARM: defconfig: update Gemini defconfig
ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
ARM: dts: da850-evm: add serial and ethernet aliases
ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
ARM: dts: am33xx: Add spi alias to match SOC schematics
ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
arm64: dt marvell: Fix AP806 system controller size
MAINTAINERS: add Macchiatobin maintainers entry
ARC: reset: remove the misleading v1 suffix all over
ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
ARC: reset: Only build on archs that have IOMEM
ARM: at91: Replace uses of virt_to_phys with __pa_symbol
...
|
||
|
Olof Johansson
|
180eb4f17e |
Reset controller fixes for v4.14
- Remove misleading HSDK v1 suffix, as there is no v2 planned - Add missing DT binding documentation for HSDK reset driver - Fix HSDK reset driver dependencies -----BEGIN PGP SIGNATURE----- iQJMBAABCAA2FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAlnD45UYHHBoaWxpcHAu emFiZWxAZ21haWwuY29tAAoJEFDCiBxwnmDr4nEP/jDhdvcNVEDn6+AVoEUDIXPF vray929miIdCrSGD0TIqo4lARuyOIe9+jT6Nw0oSnheRDcb/QpqsCKm+177lHIEd OiJiCoI3NFCwzLwPiKFHzh5JPUWnCVo5uf9lqtc9uyW3vvtnmHHPnD4xT74xQZnE wZToOnJGjxvDzRtDj1BJTwN6zCf6dyUbN9Eg07QIucu/pig6Ingai0dINzt2aFK0 H1IiEdawX+J/BphHffopstyN7u1Da72N38gtV05L8kvSFmNBwU8VOkWtkSL5ef8v FSWepDjqepODV8jtYw04yf5CP+O7fElzS26hC7tFzCgJM26yFUXmxhpNhRIZ+S8h YxwCYTnbr7+gx8oPpV+SdxT/8vEpDxK8rH1yEpW1CltTIr2U0VNC5b86MYc4hKkj oJl/vMFoHNJEw283dlPZG2yliAtDrWD+Y+YqgSYuiXVsVMj9umfkMm92lg4sBI9Y CbgBiyuPgXQh2UHmb6scWLrhur3quiEDvIMHxTR0uB5eDw7uSL+x1bf9EjeOqClY Bt96w/wSQ0trIvPIh/Wz6sBbXuwJsw2u+U8OMtiAq2T7pwWqHbCk+jMZRV57PMFT b+TcI74dRLHMfRYs/DDPSk3f4awLX8UWViqJdSP/lMVAyiGpsqWOojy4jDde+t3P S4ACP6FwidTvNyrMYJZu =Jx/i -----END PGP SIGNATURE----- Merge tag 'reset-fixes-for-4.14' of git://git.pengutronix.de/git/pza/linux into fixes Reset controller fixes for v4.14 - Remove misleading HSDK v1 suffix, as there is no v2 planned - Add missing DT binding documentation for HSDK reset driver - Fix HSDK reset driver dependencies * tag 'reset-fixes-for-4.14' of git://git.pengutronix.de/git/pza/linux: reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST ARC: reset: remove the misleading v1 suffix all over ARC: reset: add missing DT binding documentation for HSDKv1 reset driver ARC: reset: Only build on archs that have IOMEM Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
David Wu
|
05946876f0 |
net: stmmac: dwmac-rk: Add RK3128 GMAC support
Add constants and callback functions for the dwmac on rk3128 soc. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
27b3b1601c |
TTY/Serial fixes for 4.14-rc4
Here are a small number (5) of patches for some reported TTY and serial issues. Nothing major, a documentation update, timing fix, error handling fix, name reporting fix, and a timeout issue resolved. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWdN+uw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykZmgCbBSJmwcbVhuhZ64Fx4OE0eprjOgoAoMLmHaT2 jTjQTxM/Gaz108t3o9rt =5ve+ -----END PGP SIGNATURE----- Merge tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are a small number (5) of patches for some reported TTY and serial issues. Nothing major, a documentation update, timing fix, error handling fix, name reporting fix, and a timeout issue resolved. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sccnxp: Fix error handling in sccnxp_probe() tty: serial: lpuart: avoid report NULL interrupt serial: bcm63xx: fix timing issue. mxser: fix timeout calculation for low rates serial: sh-sci: document R8A77970 bindings |
||
|
Gregory CLEMENT
|
4792ea04bc |
net: mvpp2: Fix clock resource by adding an optional bus clock
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
95dcc4dc38 |
LED fixes for 4.14-rc3
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJZzq0FAAoJEL1qUBy3i3wmiP0P/ihe5tcmm5ckT6PMCqgAlZQU 7JDZCKlBZ/T50/f1luumkQ1rkfBD2KeG7NGjPWo2cmOKynalPkc/k2GJBuFzCrQw pkl4kpwxdg0EaufNQOFqIBaW14d5kug5upkImlrZNW442xB5/Xmhom8BVO9Uswz6 wEOpq2QFbsxmtMGfbYC7PwmgmudutV0Iv4Eco940QjZd2ce3r0rkf0x8Q5CTYjHx LyoCDqcS4KA9lc88g8NMpI/NUEZ14hMSsZsMGpmXuvYgA2Mn4rtGNT4SFbOVnDW9 97x7SsxwOJJoC1G1/XbNaRMgJnovAnDl/E7zT3k+ZqtQfXwbl78Jxp6lxB/E6te5 PKmsqyNc0HvwWy7F8CPjnzn6Nuza9J1cMVU1wTWzQxLzTfm3MLs3Fx5bSKjFUe0g ENYDXzYkxiaD0sgfp8mi8qVLdXiidDkIxSX4LnhY3bKcNW6HfcI407lsb4aOpvBt Ho5cJWTuVCul4i/j38c0wU1SuYtdCwBOOpOR4FuTjkaCUbFNulHLAFxiKjEzTMSC NzVGFHpSLisB/AUTXD3F0jYK7XXqvj1NpVlbgjNVwhhPolv4TofxjGdAZ2IxLRSk p1XoRG4KN5Su1al2DS0m0r7hH4dxdvEsyCP0ylX73B+z3iCsIVedfo7Rihkj9Mi2 oVgdidWdgkotQOrHefVE =swPa -----END PGP SIGNATURE----- Merge tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: "Four fixes for the as3645a LED flash controller and one update to MAINTAINERS" * tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Add entry for MediaTek PMIC LED driver as3645a: Unregister indicator LED on device unbind as3645a: Use integer numbers for parsing LEDs dt: bindings: as3645a: Use LED number to refer to LEDs as3645a: Use ams,input-max-microamp as documented in DT bindings |
||
|
Linus Torvalds
|
6e7f253801 |
DeviceTree fixes for 4.14:
- Fix build for !OF providing empty of_find_device_by_node - Fix Abracon vendor prefix - Sync dtx_diff include paths (again) - A stm32h7 clock binding doc fix -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJZyDBuEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcPmCRAA gkNwWbuAwT4VcfOwHYsEaEU77xbM0y1fGbE8dDFp5AtfDV12gJYZlROsEhYvD/aH 7g47adO/t9tbMW2NA/0d3TAHlTv5TarGJqxkV36FkC2P3hkw56B+0Een7g4KUXm4 QLPhgaWdcrD6SnHy9BA+X+aNnqI3Ti4IV1QEM6ul4g5E6tGXVMDKzZ3uLMdGh37s 9UMxy49GoWraga04TAT1ENvlrsY0sH494MoMh+ZJYzYPAJOla3GE8dI1mrsGyjGe chWxUBSUa46Lcq/jLM1y3i4S2x4v8fkBTyTIHjklseT5r6T/4KfLl+oXrR6RvuRz tBalOtBj85/ihLu/qle0KChugGalF4qytP6WhFrT2911tmjMLHLSB3Y0TAT4d95t ZcGmLIezS6duUVL2Is9CauuLvRklQ0osCcMVgh1nmpAWGJ2ROlfBpafSJveqN3+0 3tyQU8XuRW4VyQbsARgFZ+g1gmbqBMI3nTcdcg2qith3EMRrMo4/mU5kh1EfSXyQ hUShqnOLMLYY38KjX7gNKy8J0XAx90oR9chyxoq3fwcqkubLngprZkk00+JPdjVq BQwfn10bwxAg+qSMy/5eUPCz0tG94ROJ0PPG4QiSLSvvZH8kSIymCJoq8sGdta3E nDwtkyKSgZoqF4VAdy4OhVv1aRqCwlrLQBEc/qBs/Is= =6bcc -----END PGP SIGNATURE----- Merge tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - fix build for !OF providing empty of_find_device_by_node - fix Abracon vendor prefix - sync dtx_diff include paths (again) - a stm32h7 clock binding doc fix * tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clk: stm32h7: fix clock-cell size scripts/dtc: dtx_diff - 2nd update of include dts paths to match build dt-bindings: fix vendor prefix for Abracon of: provide inline helper for of_find_device_by_node |
||
|
Linus Torvalds
|
1436ab068d |
Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull TPM updates from James Morris: "Here are the TPM updates from Jarkko for v4.14, which I've placed in their own branch (next-tpm). I ended up cherry-picking them as other changes had been made in Jarkko's branch after he sent me his original pull request. I plan on maintaining a separate branch for TPM (and other security subsystems) from now on. From Jarkko: 'Not much this time except a few fixes'" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: ibmvtpm: simplify crq initialization and document crq format tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers Documentation: tpm: add powered-while-suspended binding documentation tpm: tpm_crb: constify acpi_device_id. tpm: vtpm: constify vio_device_id |
||
|
Enric Balletbo i Serra
|
5d0e4d7814 |
Documentation: tpm: add powered-while-suspended binding documentation
Add a new powered-while-suspended property to control the behavior of the TPM suspend/resume. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com> |
||
|
Sakari Ailus
|
75f9f7279e |
dt: bindings: as3645a: Use LED number to refer to LEDs
Use integers (reg property) to tell the number of the LED to the driver instead of the node name. While both of these approaches are currently used by the LED bindings, using integers will require less driver changes for ACPI support. Additionally, it will make possible LED naming using chip and LED node names, effectively making the label property most useful for human-readable names only. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> |
||
|
Gabriel Fernandez
|
127b8e2692 |
dt-bindings: clk: stm32h7: fix clock-cell size
The clock-cell size is 1 on stm32h7 plaform.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Fixes:
|
||
|
Alexandre Belloni
|
a6899e9005 |
dt-bindings: fix vendor prefix for Abracon
Commit
|
||
|
Yoshihiro Shimoda
|
f231c4178a |
dt-bindings: net: renesas-ravb: Add support for R8A77995 RAVB
Add a new compatible string for the R8A77995 (R-Car D3) RAVB. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Sergei Shtylyov
|
785ec87483 |
ravb: document R8A77970 bindings
R-Car V3M (R8A77970) SoC also has the R-Car gen3 compatible EtherAVB device, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Sergei Shtylyov
|
432219fd00 |
serial: sh-sci: document R8A77970 bindings
R-Car V3M (R8A77970) SoC also has the R-Car gen3 compatible SCIF and HSCIF ports, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Vineet Gupta
|
13541226dc |
ARC: reset: remove the misleading v1 suffix all over
There is no plan yet to do a v2 board. And even if we were to do it only some IPs would actually change, so it be best to add suffixes at that point, not now ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
|
Eugeniy Paltsev
|
fc9655e651 |
ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
When applying the original patch [1], the DT binding docs were lost.
This patch adds them back.
[1] https://patchwork.kernel.org/patch/9852997/
Fixes:
|
||
|
Linus Torvalds
|
c8503720fd |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
"A second round of updates for the input subsystem:
- a new driver for PWM-controlled vibrators
- ucb1400 touchscreen driver had completely busted suspend/resume
handling
- we now handle "home" button found on some devices with Goodix
touchscreens
- assorted other fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Gigabyte P57 to the keyboard reset table
Input: xpad - validate USB endpoint type during probe
Input: ucb1400_ts - fix suspend and resume handling
Input: edt-ft5x06 - fix access to non-existing register
Input: elantech - make arrays debounce_packet static, reduces object code size
Input: surface3_spi - make const array header static, reduces object code size
Input: goodix - add support for capacitive home button
Input: add a driver for PWM controllable vibrators
Input: adi - make array seq static, reduces object code size
|
||
|
Linus Torvalds
|
7318413077 |
Merge branch '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for 4.14 for MIPS; below a summary of
the non-merge commits:
CM:
- Rename mips_cm_base to mips_gcr_base
- Specify register size when generating accessors
- Use BIT/GENMASK for register fields, order & drop shifts
- Add cluster & block args to mips_cm_lock_other()
CPC:
- Use common CPS accessor generation macros
- Use BIT/GENMASK for register fields, order & drop shifts
- Introduce register modify (set/clear/change) accessors
- Use change_*, set_* & clear_* where appropriate
- Add CM/CPC 3.5 register definitions
- Use GlobalNumber macros rather than magic numbers
- Have asm/mips-cps.h include CM & CPC headers
- Cluster support for topology functions
- Detect CPUs in secondary clusters
CPS:
- Read GIC_VL_IDENT directly, not via irqchip driver
DMA:
- Consolidate coherent and non-coherent dma_alloc code
- Don't use dma_cache_sync to implement fd_cacheflush
FPU emulation / FP assist code:
- Another series of 14 commits fixing corner cases such as NaN
propgagation and other special input values.
- Zero bits 32-63 of the result for a CLASS.D instruction.
- Enhanced statics via debugfs
- Do not use bools for arithmetic. GCC 7.1 moans about this.
- Correct user fault_addr type
Generic MIPS:
- Enhancement of stack backtraces
- Cleanup from non-existing options
- Handle non word sized instructions when examining frame
- Fix detection and decoding of ADDIUSP instruction
- Fix decoding of SWSP16 instruction
- Refactor handling of stack pointer in get_frame_info
- Remove unreachable code from force_fcr31_sig()
- Convert to using %pOF instead of full_name
- Remove the R6000 support.
- Move FP code from *_switch.S to *_fpu.S
- Remove unused ST_OFF from r2300_switch.S
- Allow platform to specify multiple its.S files
- Add #includes to various files to ensure code builds reliable and
without warning..
- Remove __invalidate_kernel_vmap_range
- Remove plat_timer_setup
- Declare various variables & functions static
- Abstract CPU core & VP(E) ID access through accessor functions
- Store core & VP IDs in GlobalNumber-style variable
- Unify checks for sibling CPUs
- Add CPU cluster number accessors
- Prevent direct use of generic_defconfig
- Make CONFIG_MIPS_MT_SMP default y
- Add __ioread64_copy
- Remove unnecessary inclusions of linux/irqchip/mips-gic.h
GIC:
- Introduce asm/mips-gic.h with accessor functions
- Use new GIC accessor functions in mips-gic-timer
- Remove counter access functions from irq-mips-gic.c
- Remove gic_read_local_vp_id() from irq-mips-gic.c
- Simplify shared interrupt pending/mask reads in irq-mips-gic.c
- Simplify gic_local_irq_domain_map() in irq-mips-gic.c
- Drop gic_(re)set_mask() functions in irq-mips-gic.c
- Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(),
gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c.
- Convert remaining shared reg access, local int mask access and
remaining local reg access to new accessors
- Move GIC_LOCAL_INT_* to asm/mips-gic.h
- Remove GIC_CPU_INT* macros from irq-mips-gic.c
- Move various definitions to the driver
- Remove gic_get_usm_range()
- Remove __gic_irq_dispatch() forward declaration
- Remove gic_init()
- Use mips_gic_present() in place of gic_present and remove
gic_present
- Move gic_get_c0_*_int() to asm/mips-gic.h
- Remove linux/irqchip/mips-gic.h
- Inline __gic_init()
- Inline gic_basic_init()
- Make pcpu_masks a per-cpu variable
- Use pcpu_masks to avoid reading GIC_SH_MASK*
- Clean up mti, reserved-cpu-vectors handling
- Use cpumask_first_and() in gic_set_affinity()
- Let the core set struct irq_common_data affinity
microMIPS:
- Fix microMIPS stack unwinding on big endian systems
MIPS-GIC:
- SYNC after enabling GIC region
NUMA:
- Remove the unused parent_node() macro
R6:
- Constify r2_decoder_tables
- Add accessor & bit definitions for GlobalNumber
SMP:
- Constify smp ops
- Allow boot_secondary SMP op to return errors
VDSO:
- Drop gic_get_usm_range() usage
- Avoid use of linux/irqchip/mips-gic.h
Platform changes:
Alchemy:
- Add devboard machine type to cpuinfo
- update cpu feature overrides
- Threaded carddetect irqs for devboards
AR7:
- allow NULL clock for clk_get_rate
BCM63xx:
- Fix ENETDMA_6345_MAXBURST_REG offset
- Allow NULL clock for clk_get_rate
CI20:
- Enable GPIO and RTC drivers in defconfig
- Add ethernet and fixed-regulator nodes to DTS
Generic platform:
- Move Boston and NI 169445 FIT image source to their own files
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Allow filtering enabled boards by requirements
- Don't explicitly disable CONFIG_USB_SUPPORT
- Bump default NR_CPUS to 16
JZ4700:
- Probe the jz4740-rtc driver from devicetree
Lantiq:
- Drop check of boot select from the spi-falcon driver.
- Drop check of boot select from the lantiq-flash MTD driver.
- Access boot cause register in the watchdog driver through regmap
- Add device tree binding documentation for the watchdog driver
- Add docs for the RCU DT bindings.
- Convert the fpi bus driver to a platform_driver
- Remove ltq_reset_cause() and ltq_boot_select(
- Switch to a proper reset driver
- Switch to a new drivers/soc GPHY driver
- Add an USB PHY driver for the Lantiq SoCs using the RCU module
- Use of_platform_default_populate instead of __dt_register_buses
- Enable MFD_SYSCON to be able to use it for the RCU MFD
- Replace ltq_boot_select() with dummy implementation.
Loongson 2F:
- Allow NULL clock for clk_get_rate
Malta:
- Use new GIC accessor functions
NI 169445:
- Add support for NI 169445 board.
- Only include in 32r2el kernels
Octeon:
- Add support for watchdog of 78XX SOCs.
- Add support for watchdog of CN68XX SOCs.
- Expose support for mips32r1, mips32r2 and mips64r1
- Enable more drivers in config file
- Add support for accessing the boot vector.
- Remove old boot vector code from watchdog driver
- Define watchdog registers for 70xx, 73xx, 78xx, F75xx.
- Make CSR functions node aware.
- Allow access to CIU3 IRQ domains.
- Misc cleanups in the watchdog driver
Omega2+:
- New board, add support and defconfig
Pistachio:
- Enable Root FS on NFS in defconfig
Ralink:
- Add Mediatek MT7628A SoC
- Allow NULL clock for clk_get_rate
- Explicitly request exclusive reset control in the pci-mt7620 PCI driver.
SEAD3:
- Only include in 32 bit kernels by default
VoCore:
- Add VoCore as a vendor t0 dt-bindings
- Add defconfig file"
* '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits)
MIPS: Refactor handling of stack pointer in get_frame_info
MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems
MIPS: microMIPS: Fix decoding of swsp16 instruction
MIPS: microMIPS: Fix decoding of addiusp instruction
MIPS: microMIPS: Fix detection of addiusp instruction
MIPS: Handle non word sized instructions when examining frame
MIPS: ralink: allow NULL clock for clk_get_rate
MIPS: Loongson 2F: allow NULL clock for clk_get_rate
MIPS: BCM63XX: allow NULL clock for clk_get_rate
MIPS: AR7: allow NULL clock for clk_get_rate
MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset
mips: Save all registers when saving the frame
MIPS: Add DWARF unwinding to assembly
MIPS: Make SAVE_SOME more standard
MIPS: Fix issues in backtraces
MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree
MIPS: Ci20: Enable RTC driver
watchdog: octeon-wdt: Add support for 78XX SOCs.
watchdog: octeon-wdt: Add support for cn68XX SOCs.
watchdog: octeon-wdt: File cleaning.
...
|
||
|
Linus Torvalds
|
bbe05e543b |
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller |
||
|
Linus Torvalds
|
939ae58960 |
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add support for the watchdog on Meson8 and Meson8m2
- add support for MediaTek MT7623 and MT7622 SoC
- add support for the r8a77995 wdt
- explicitly request exclusive reset control for asm9260_wdt,
zx2967_wdt, rt2880_wdt and mt7621_wdt
- improvements to asm9260_wdt, aspeed_wdt, renesas_wdt and cadence_wdt
- add support for reading freq via CCF + suspend/resume support for
of_xilinx_wdt
- constify watchdog_ops and various device-id structures
- revert of commit
|
||
|
Pierre-Yves MORDRET
|
edcd2ae8eb |
dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
This patch adds the documentation of device tree bindings for STM32F7 I2C Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
|
Thor Thayer
|
8f73681616 |
dt-bindings: i2c: Add Altera I2C Controller
Add the documentation to support the Altera synthesizable logic I2C Controller in FPGA. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
|
Linus Torvalds
|
f60a2abfdb |
The diff is dominated by the Allwinner A10/A20 SoCs getting converted to
the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJZuIAQAAoJEK0CiJfG5JUlUMQQAKFwCZRfTzz0m9jJ9s1XZSR/ vldNAEUGm+Mz0W84xIzFqaT0UI1+SJK4e9Du+EN6phcCD5yVB0JS2EtRa84Bku/i Zy6AYSUNbGjx94HPwIq1hKt+UOIfBiNbJKMnkoCbEyYPA/TiWzr8JR5GyLjwYhPq IZHSvKqUKM3h2nr+MtpFJIIk8DlkLARRca4CCqa5i2Oqj6B8rjQQAq7TaLAM3ASN tSFIW2vdmWD+om2L57WHhwBgaYnUB4jBCRWkFZRsO4ZIRgm4VpePmosy2UTZ7fqb kEaW2bPuv65zUHpvjHG6yXo+yh0yk1fBsXG/joXgJ4oOmNzsIgnCZzPnGUC1ccms QdK/qhdIXsdgiR2DZtYuzUHji8+TNIPPjfAFyJjUwxDBXpqzXvsvltx2a1hg/rUP VDvTL2OnoGtrW2bXPufCkxBsyejJ4RqC5riMJws5xgMkqKKUajiLovPeuL6+8kU+ ncqWYiIkEvHNKpmW511G/g+ClLk89zgXfxKFWWR+iDjSvA0hgaiRj1V3C2HIyS8f CLpalf6ao2+O008rUiaiqJyxWuwLujcdYokay2HXvTYc45rXrVwvlaDajxqs2eer lekUA4ZbX2g6qvB0lna6PNlv8JLQ1XPdzhWD2eeQIi7JgVSgwg++kUJqglsuai56 eg5zNo6891GL9zFW10/A =0JbT -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ... |
||
|
Linus Torvalds
|
561a8eb3e1 |
RTC for 4.14
Subsystem: - Remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlm5YTcACgkQAyWl4gNJ NJKetg//Xz4zK3O1uhfz1/yWOSqbBwYxUvHzSDFuD3FtAskFPPFACgJENkj98DMF w6nCqq/TXOY+BpqPTebzc68vvHGCvZ/AEKPzvCV1KciQ+ACMFGxH8xHCLox9AdyL VtcWftPPwu3W6oNN1azV++XgVtComzfEi4pTcTXdw9EDA5yBK/Xyg3xWZ1QV/Xs5 /DFCcY69nhaJxmD/To0csmI1KbMbiprvN0vJHtF589Y4KhBfnlZnq3bAx2Coo1kv PpPy0e0kLzzlWMtMsiM6I3w5iwuf5o1Vajcg5ylAK0Wjvfgh7DqYX0ZQySw/5eZT f1OCqP0GVSugmJ8SFMVxYbXPGgpUETtT6ztB9fsAYdUye3I/xfqmip3A7vcFlrAb /R1gTZOyx/uwv3qVRsx0LJVxJQJ7vq/3dJYFiQo80AbPyY+GQT3xPr3z33DcJYJt 2CL0pd6NfEzgesuVCnpZxF+wNJ+449Jzmxge5klqH1rYQ/IjOXS0qAg5pQRUaRjC CGNkjBWT82HN1Y8G++4FpdmHLUjkO07QyAAZiYvHNXX3aMcyl8Az/2kcrl+yq7tl 03CxveLD8kP1bVsRMEIbx24l4lB93U5HyFTeli9xjBMbxDrBK2NZXCD7g/yI/sbs ryUe5W33Xgxm0DJ9CXts0qOf/ommiBoogYk+oxe+AGWdLR1weRo= =Xkx1 -----END PGP SIGNATURE----- Merge tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support" * tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: ds1307: use octal permissions rtc: ds1307: fix braces rtc: ds1307: fix alignments and blank lines rtc: ds1307: use BIT rtc: ds1307: use u32 rtc: ds1307: use sizeof rtc: ds1307: remove regs member rtc: Add Realtek RTD1295 dt-bindings: rtc: Add Realtek RTD1295 rtc: sun6i: Add support for the external oscillator gate rtc: goldfish: Add RTC driver for Android emulator dt-bindings: Add device tree binding for Goldfish RTC driver rtc: ds1307: add basic support for ds1341 chip rtc: ds1307: remove member nvram_offset from struct ds1307 rtc: ds1307: factor out offset to struct chip_desc rtc: ds1307: factor out rtc_ops to struct chip_desc rtc: ds1307: factor out irq_handler to struct chip_desc rtc: ds1307: improve irq setup rtc: ds1307: constify struct chip_desc variables rtc: ds1307: improve trickle charger initialization ... |
||
|
Linus Torvalds
|
c971aa3693 |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui: - fix resources release in error paths when registering thermal zone. (Christophe Jaillet) - introduce a new thermal driver for on-chip PVT (Process, Voltage and Temperature) monitoring unit implemented on UniPhier SoCs. This driver supports temperature monitoring and alert function. (Kunihiko Hayashi) - Add support for mt2712 chip in the mtk_thermal driver. (Louis Yu) - Add support for RK3328 SOC in rockchip_thermal driver. (Rocky Hao) - cleanup a couple of platform thermal drivers to constify thermal_zone_of_device_ops structures. (Julia Lawall) - a couple of fixes in int340x and intel_pch_thermal thermal driver. (Arvind Yadav, Sumeet Pawnikar, Brian Bian, Ed Swierk, Zhang Rui) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (27 commits) Thermal: int3406_thermal: fix thermal sysfs I/F thermal: mediatek: minor mtk_thermal.c cleanups thermal: mediatek: extend calibration data for mt2712 chip thermal: mediatek: add Mediatek thermal driver for mt2712 dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: intel_pch_thermal: Fix enable check on Broadwell-DE thermal: rockchip: Support the RK3328 SOC in thermal driver dt-bindings: rockchip-thermal: Support the RK3328 SoC compatible thermal: bcm2835: constify thermal_zone_of_device_ops structures thermal: exynos: constify thermal_zone_of_device_ops structures thermal: zx2967: constify thermal_zone_of_device_ops structures thermal: rcar_gen3_thermal: constify thermal_zone_of_device_ops structures thermal: qoriq: constify thermal_zone_of_device_ops structures thermal: hisilicon: constify thermal_zone_of_device_ops structures thermal: core: Fix resources release in error paths in thermal_zone_device_register() thermal: core: Use the new 'thermal_zone_destroy_device_groups()' helper function thermal: core: Add some new helper functions to free resources thermal: int3400_thermal: process "thermal table changed" event thermal: uniphier: add UniPhier thermal driver dt-bindings: thermal: add binding documentation for UniPhier thermal monitor ... |
||
|
Linus Torvalds
|
66c9457df3 |
pwm: Changes for v4.14-rc1
The changes for this release include a new driver for the PWM controller found on SoCs of the ZTX ZX family. Support for an old SH-Mobile SoC has been dropped and the Rockchip and MediaTek drivers gain support for more generations. Other than that there are a bunch of coding style fixes, minor bug fixes and cleanup as well as documentation patches. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlm2fWoZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zofXuD/0WP6F9ZMx3FDpc02PJe7KA H634eZXRxjRBMyJ+fWqBf+VZ9uKyA8Qh+lKzve57vzBah8cnp2fRS6MtNxCqhq9T kiu9ocsbncF01HuAqBCVZM/TwbPIa8QtDGQ7HlmQ+brdWdXyntjilWmoW+DQuoDT hsC/AL+Ih0t9LH8zrtv5wtB92+920M9NUe35up3hrc1qQgHCs+1VwRQ0PUlhlkwF xQVop+t6rAtVVHx+mEw3tBQ913Ciy2sJY/BuGkXzTCj1P3i8HrPWE/laVXrn9Kbe taTeewCr1IZSnyFY4/0+JPz2/a/kFIa36N0uQop0WGcrKV9cp1Hdjuhqa4joKgdk rPrNJ3YQ4ji6U/vsy0FYuWPXfQI8sK7i56oJiRVAOIH0OaI6CTx1nDpRr/eXvqSd fVf/zwUIVdzutREqYHVU8WwfYJO//U1zWymsJsfD1hZu/2hSZryjemhIjrmi66gh RF+8Q9qrV1KGeLFIEAvRpnZ48yM/NKQxKqf9cBUfQmvELpu3b0ujx1eYmGefPqvu 1jIQbQ96sZI39geF+qt+FE994v7VZnYiMyhWhtpR8inkw9tfcYs+oGr70Jz+SgFf 0xV/M0aC7KWsOD7Avh3vqMH+j3tUf3zfK1/a0Jsr3PYLCDlw2WEnaWr5b3mv4YQA Ta4B6NVjFz41LD9rZV+68A== =GUps -----END PGP SIGNATURE----- Merge tag 'pwm/for-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes for this release include a new driver for the PWM controller found on SoCs of the ZTX ZX family. Support for an old SH-Mobile SoC has been dropped and the Rockchip and MediaTek drivers gain support for more generations. Other than that there are a bunch of coding style fixes, minor bug fixes and cleanup as well as documentation patches" * tag 'pwm/for-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (32 commits) pwm: pwm-samsung: fix suspend/resume support pwm: samsung: Remove redundant checks from pwm_samsung_config() pwm: mediatek: Disable clock on PWM configuration failure dt-bindings: pwm: Add MT2712/MT7622 information pwm: mediatek: Fix clock control issue pwm: mediatek: Fix PWM source clock selection pwm: mediatek: Fix Kconfig description pwm: tegra: Explicitly request exclusive reset control pwm: hibvt: Explicitly request exclusive reset control pwm: tiehrpwm: Set driver data before runtime PM enable pwm: tiehrpwm: Miscellaneous coding style fixups pwm: tiecap: Set driver data before runtime PM enable pwm: tiecap: Miscellaneous coding style fixups dt-bindings: pwm: tiecap: Add TI 66AK2G SoC specific compatible pwm: tiehrpwm: fix clock imbalance in probe error path pwm: tiehrpwm: Fix runtime PM imbalance at unbind pwm: Kconfig: Enable pwm-tiecap to be built for Keystone pwm: Add ZTE ZX PWM device driver dt-bindings: pwm: Add bindings doc for ZTE ZX PWM controller pwm: bcm2835: Support for polarity setting via DT ... |
||
|
Linus Torvalds
|
e90937e756 |
ARM: arm64: Devicetree updates for v4.14
As usual, device tree updates is the bulk of our material in this merge
window. This time around, 559 patches affecting both 32- and 64-bit
platforms.
Changes are too many to list individually, but some of the larger ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also several
new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZtdtjAAoJEIwa5zzehBx3PzgP/iCQyUk5wklG9E5YNl8a9m/o
djBkelabTm52s5ZTu6Awsq5rx8jUMqcb0vo+9v9yPWFG6On2oTZyZ/rE1Wbj3+gG
+ENVyRgxmzYDTXqQLiu1UOV9wSA0gHwQCRZvE7i32NNfLu+tAsvu9e/AuznQ1xhR
4G7dGCRRlRkZkrVKrJ7JjklmW578pFQkZLmz8K2nWqwh1tKpK3fY19SrwUKx+YCR
tnMPYAPjB5zxR9tfcDS4FUKdiC7dMiMzZNGiYl5a26X6wsNR7xYtNzFMaGZn1ecG
PwOS+DAnj8J+AfpQBLWu9xytHbJdqITRuNcF+OXNVW9TKmb0syf7VgRUDkhjIMxP
aGZc4Q6PwgTRwnX+w6fTzJTyk+uXtieCicZaaZ1jlgcQq0pfbzJ1vZMpq4aoVlxU
mS84i1bd8AiavmHuyIRNB3/T4aAsVhTUIBndXluKV8yWroXhAukfI1YmGr1Eux7C
fy5pPeDqk9lXR3bqIhfnaLoVsApEXTOWMC8X48vwfaQHiCGR9JJwpfsGcaNi1bri
Col1qRzkXWGA6KqTWtpo+o12rYuMGc0mpZTCmejKuBoxMXOU+wLyJYgaxa7pyesX
S5rLaIe2l9ppXHjjEERp7AzczzLS5W20Tez5vYnZAQb1dYuJzwXwiATt8NT+XG3V
Wu92UwUfjxYk8vGz48ph
=R45j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson:
"As usual, device tree updates is the bulk of our material in this
merge window. This time around, 559 patches affecting both 32- and
64-bit platforms.
Changes are too many to list individually, but some of the larger
ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also
several new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board"
* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
ARM: dts: at91: at91sam9g45: add AC97
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
...
|
||
|
Linus Torvalds
|
ae46654bcf |
ARM: SoC driver updates for v4.14
This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver subsystems
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yBzS
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver
subsystems"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
soc/tegra: fuse: Add missing semi-colon
soc/tegra: Restrict SoC device registration to Tegra
drivers: soc: sunxi: add support for A64 and its SRAM C
drivers: soc: sunxi: add support for remapping func value to reg value
drivers: soc: sunxi: fix error processing on base address when claiming
dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
bus: sunxi-rsb: Enable by default for ARM64
soc/tegra: Register SoC device
firmware: tegra: set drvdata earlier
memory: Convert to using %pOF instead of full_name
soc: Convert to using %pOF instead of full_name
bus: Convert to using %pOF instead of full_name
firmware: Convert to using %pOF instead of full_name
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
reset: uniphier: add analog amplifiers reset control
reset: uniphier: add video input subsystem reset control
...
|
||
|
Linus Torvalds
|
7f1b9be13a |
ARM/arm64: SoC platform updates for v4.14
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
|
||
|
Linus Torvalds
|
4dfc278803 |
IOMMU Updates for Linux v4.14
Slightly more changes than usual this time:
- KDump Kernel IOMMU take-over code for AMD IOMMU. The code now
tries to preserve the mappings of the kernel so that master
aborts for devices are avoided. Master aborts cause some
devices to fail in the kdump kernel, so this code makes the
dump more likely to succeed when AMD IOMMU is enabled.
- Common flush queue implementation for IOVA code users. The
code is still optional, but AMD and Intel IOMMU drivers had
their own implementation which is now unified.
- Finish support for iommu-groups. All drivers implement this
feature now so that IOMMU core code can rely on it.
- Finish support for 'struct iommu_device' in iommu drivers. All
drivers now use the interface.
- New functions in the IOMMU-API for explicit IO/TLB flushing.
This will help to reduce the number of IO/TLB flushes when
IOMMU drivers support this interface.
- Support for mt2712 in the Mediatek IOMMU driver
- New IOMMU driver for QCOM hardware
- System PM support for ARM-SMMU
- Shutdown method for ARM-SMMU-v3
- Some constification patches
- Various other small improvements and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJZtCFNAAoJECvwRC2XARrjZnQP/AxC/ezQpq82HbegF4sM/cVE
Ep7TeTqodEl75FS/6txe2wU0pwodqk/LB9ajfQZUbE1w8vKsNEqi5qf4ZYHGoxYI
5bWyjJBzKIlwENH5lsBpQNt6XLevrYmRsFy7F0tRYy+qPQq8k+js2i7/XkCL3q7L
3xklF847RRoITaTOhhaROx1pF23dSMEsS2XGuWHcZfjORtep4wcFKzd/2SvlCWCo
P2bRU7jBzfJuuGSA80gaiUbDmrULTUfYuZNp7njASzCgsDmagERtvDEpdoXPNNSp
u6s4LjU1Dp3fgr6g6cFRO7B6JUbWd619nwo9so/c/wZN54yEngBF9EyeeF3mv2O5
ZbM2mOW3RlZcjxFT/AC8G4cZwwP6MpCEQOdqknoqc6ZQwcDqwN0o9I4+po0wsiAU
89ijZZe9Mx0p9lNpihaBEB1erAUWPo5Obh62zo80W3h6x9WzkGQWM+PyFK2DYoaC
8biEZzcc21sLEHvXQkcEGJSKrihHr9sluOqvxmCw5QAkYIFAeZRoeH7JtZWjVCnr
T3XvaG1G1Aw6tS7ErxufdKawREAGki0Rm9i1baiH9sqNj5rllM01Y+PgU6E21Nbg
iZp9gJLjfwM4vhYLlovvQK5PRoOBsCkyCpEI4GJqjLeam5p/WN06CFFf0ifQofYr
qDPCVDkWHWV8nugFFKE7
=EVh9
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"Slightly more changes than usual this time:
- KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries
to preserve the mappings of the kernel so that master aborts for
devices are avoided. Master aborts cause some devices to fail in
the kdump kernel, so this code makes the dump more likely to
succeed when AMD IOMMU is enabled.
- common flush queue implementation for IOVA code users. The code is
still optional, but AMD and Intel IOMMU drivers had their own
implementation which is now unified.
- finish support for iommu-groups. All drivers implement this feature
now so that IOMMU core code can rely on it.
- finish support for 'struct iommu_device' in iommu drivers. All
drivers now use the interface.
- new functions in the IOMMU-API for explicit IO/TLB flushing. This
will help to reduce the number of IO/TLB flushes when IOMMU drivers
support this interface.
- support for mt2712 in the Mediatek IOMMU driver
- new IOMMU driver for QCOM hardware
- system PM support for ARM-SMMU
- shutdown method for ARM-SMMU-v3
- some constification patches
- various other small improvements and fixes"
* tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/vt-d: Don't be too aggressive when clearing one context entry
iommu: Introduce Interface for IOMMU TLB Flushing
iommu/s390: Constify iommu_ops
iommu/vt-d: Avoid calling virt_to_phys() on null pointer
iommu/vt-d: IOMMU Page Request needs to check if address is canonical.
arm/tegra: Call bus_set_iommu() after iommu_device_register()
iommu/exynos: Constify iommu_ops
iommu/ipmmu-vmsa: Make ipmmu_gather_ops const
iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable
iommu/amd: Rename a few flush functions
iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY
iommu/mediatek: Fix a build warning of BIT(32) in ARM
iommu/mediatek: Fix a build fail of m4u_type
iommu: qcom: annotate PM functions as __maybe_unused
iommu/pamu: Fix PAMU boot crash
memory: mtk-smi: Degrade SMI init to module_init
iommu/mediatek: Enlarge the validate PA range for 4GB mode
iommu/mediatek: Disable iommu clock when system suspend
iommu/mediatek: Move pgtable allocation into domain_alloc
iommu/mediatek: Merge 2 M4U HWs into one iommu domain
...
|
||
|
Linus Torvalds
|
a59e57da49 |
MTD changes for 4.14:
General updates:
* Constify pci_device_id in various drivers
* Constify device_type
* Remove pad control code from the Gemini driver
* Use %pOF to print OF node full_name
* Various fixes in the physmap_of driver
* Remove unused vars in mtdswap
* Check devm_kzalloc() return value in the spear_smi driver
* Check clk_prepare_enable() return code in the st_spi_fsm driver
* Create per MTD device debugfs enties
NAND updates, from Boris Brezillon:
* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs
* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
* add support to the JEDEC JESD216B specification (SFDP tables).
* add support to the Intel Denverton SPI flash controller.
* fix error recovery for Spansion/Cypress SPI NOR memories.
* fix 4-byte address management for the Aspeed SPI controller.
* add support to some Microchip SST26 memory parts
* remove unneeded pinctrl header Write a message for tag:
-----BEGIN PGP SIGNATURE-----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=UgCd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"General updates:
- Constify pci_device_id in various drivers
- Constify device_type
- Remove pad control code from the Gemini driver
- Use %pOF to print OF node full_name
- Various fixes in the physmap_of driver
- Remove unused vars in mtdswap
- Check devm_kzalloc() return value in the spear_smi driver
- Check clk_prepare_enable() return code in the st_spi_fsm driver
- Create per MTD device debugfs enties
NAND updates, from Boris Brezillon:
- Fix memory leaks in the core
- Remove unused NAND locking support
- Rename nand.h into rawnand.h (preparing support for spi NANDs)
- Use NAND_MAX_ID_LEN where appropriate
- Fix support for 20nm Hynix chips
- Fix support for Samsung and Hynix SLC NANDs
- Various cleanup, improvements and fixes in the qcom driver
- Fixes for bugs detected by various static code analysis tools
- Fix mxc ooblayout definition
- Add a new part_parsers to tmio and sharpsl platform data in order
to define a custom list of partition parsers
- Request the reset line in exclusive mode in the sunxi driver
- Fix a build error in the orion-nand driver when compiled for ARMv4
- Allow 64-bit mvebu platforms to select the PXA3XX driver
SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
- add support to the JEDEC JESD216B specification (SFDP tables).
- add support to the Intel Denverton SPI flash controller.
- fix error recovery for Spansion/Cypress SPI NOR memories.
- fix 4-byte address management for the Aspeed SPI controller.
- add support to some Microchip SST26 memory parts
- remove unneeded pinctrl header Write a message for tag:"
* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
mtd: nand: make Samsung SLC NAND usable again
mtd: nand: tmio: Register partitions using the parsers
mfd: tmio: Add partition parsers platform data
mtd: nand: sharpsl: Register partitions using the parsers
mtd: nand: sharpsl: Add partition parsers platform data
mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
dt-bindings: qcom_nandc: fix the ipq806x device tree example
mtd: nand: qcom: support for different DEV_CMD register offsets
mtd: nand: qcom: QPIC data descriptors handling
mtd: nand: qcom: enable BAM or ADM mode
mtd: nand: qcom: erased codeword detection configuration
mtd: nand: qcom: support for read location registers
mtd: nand: qcom: support for passing flags in DMA helper functions
mtd: nand: qcom: add BAM DMA descriptor handling
mtd: nand: qcom: allocate BAM transaction
mtd: nand: qcom: DMA mapping support for register read buffer
...
|
||
|
Linus Torvalds
|
0ce5c79f38 |
power supply and reset changes for the v4.14 series
* New chip/feature support - bq27xxx: support updating battery config from DT - bq24190: support loading battery charge info from DT - LTC2941: add LTC2942/LTC2944 support - max17042: add ACPI support - max1721x: new driver * Misc - Move bq27xxx w1 driver from w1 into power-supply subsystem - Introduce power_supply_set_input_current_limit_from_supplier - constify stuff - some minor fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlmxSSQACgkQ2O7X88g7 +ppf2xAAliDRdNPuxpKu69syiX+iNPaPHTqRXd41sAJlEX2IYv/avcoNFcGySplR gJYdlbx2Qd86aBaMf92h4tGihk2iNa87It9xkA+JgO3wNoKiZ+b5lk///IDk8aDF 8sknSTXJtGYse0jwBRKTT4cL1ZW/g10heUxPr8AiX8nL4QhMf0TIxXawWQteAZDE dDz/UEAqbINooD5HtP716Z0e3U6FyWTqFc6UzuR+n8c6wC6n/JA6h91ASAHUmExT aH1JuQyrmucBp8cLhP01ThSkoIdGbcZM7nJ3WQBlfDricFJXa/yThug/mHvjztJX 3U1UOZBqsb/LL9Dh5hl/D3+i+7qI29KCyUZiYUrwoiSjxM/AtOB2t4cAWmU7+PnJ V3coYC1s2DlwYcLIUiyE2zmVWIDcOuuOJhQjCdpUBTPvz83nQ0v5oXMn7VnQmWlO 8Z/IRWnW90v2D2iHmSPAwFG3ATfH0pAP8G/4Wrudti+ymSxAhXaLqQcj3HHjKjvI 3CEGOPAN9Opuof7SfkIVuoOjPzazx5GUpAZQKi8LS87KRdXN4ics3vbNB6VBDR50 FzVhJJZBTeAOJCDogInuu4gDa0L5Ikfdkhqc+nvNfcdsE2k3H8Nb//+UPiPnfgEA mEFyp9gaY08/3ylDEHxp3N/W7POrL4QelTjv0dvdKW70i7KtWpA= =iy5f -----END PGP SIGNATURE----- Merge tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: "New chip/feature support: - bq27xxx: support updating battery config from DT - bq24190: support loading battery charge info from DT - LTC2941: add LTC2942/LTC2944 support - max17042: add ACPI support - max1721x: new driver Misc: - Move bq27xxx w1 driver from w1 into power-supply subsystem - Introduce power_supply_set_input_current_limit_from_supplier - constify stuff - some minor fixes" * tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits) power: supply: bq27xxx: enable writing capacity values for bq27421 power: supply: bq24190_charger: Get input_current_limit from our supplier power: supply: bq24190_charger: Export 5V boost converter as regulator power: supply: bq24190_charger: Add power_supply_battery_info support power: supply: bq24190_charger: Add property system-minimum-microvolt power: supply: bq24190_charger: Enable devicetree config dt-bindings: power: supply: Add docs for TI BQ24190 battery charger power: supply: bq27xxx: Remove duplicate chip data arrays power: supply: bq27xxx: Enable data memory update for certain chips power: supply: bq27xxx: Add chip IDs for previously shadowed chips power: supply: bq27xxx: Create single chip data table power: supply: bq24190_charger: Add ti,bq24192i to devicetree table power: supply: bq24190_charger: Add input_current_limit property power: supply: Add power_supply_set_input_current_limit_from_supplier helper power: supply: max17042_battery: Fix compiler warning power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies() power: supply: make device_attribute const power: supply: max17042_battery: Fix ACPI interrupt issues power: supply: max17042_battery: Add support for ACPI enumeration power: supply: lp8788: Make several arrays static const * const ... |
||
|
Linus Torvalds
|
7151202b64 |
rpmsg updates for v4.14
This extends the Qualcomm GLINK implementation to support the additional features used for communicating with modem and DSP coprocessors in modern Qualcomm platforms. In addition to this there's support for placing virtio RPMSG buffers in non-System RAM. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZswd9AAoJEAsfOT8Nma3FSigQALyq2wNtf60tkTKW0f2K8cM6 JpnEKAKqO1t5ZkokEevT05PLT4rqXuidrDVOBJ3VQ7LtSqJOiTjGyN9YM8t+WBVG ts0Yg69+wUxBATg9iM2JiUsKn8gH8swUAtf16dmkL/Ca8BJKOHGYTUjADfwuFrEg EAGcLZnlwz736xdo9qZu/Ke9rItz6CDOD3AphbpJbcv7Wj2F/mEuqMZjfLk+1Mo8 C3wXx9jIzW1siNtT0OY9raUNV5gLaGS2zZ+DYwrwjND7Eh0TqeLxyJ1OS7f2kOZ5 P6zcrYw02WbDVW7LUzVegj5PejZm/wdFZ5hSvishEfZZVT+wGHBK34mfObe0moJZ Wp8jFSXKqECIEU3x/2DtPAHi+mittDpQ3FCkElWKJRD6B3HTySHjvM0lOor+zYKB gRX4QUR6jwkSRAbV6GP24Z8SL9kU6TXOSoOQvuzuKhB30JzADJPuQnGZR0SftYiH YJG/RT9FklbljWP9hIgey3QPNHPoL3IzNBU2iyEjdraabmNaFEb++wpLdpCZdnGf 1HMLrMfUmd3QKRtXvT+5Q6CjnfzwFk1ii1naN3Ky9rar3WRtij5bzo8eveR8i9ag DtWA88N9mnpSUao14o5vKN830q3/fkwW6HyT0nCd59Wq94cMNfiMdFPVXvO0xVAF mjP4JXHbqNhdJySWR4Du =PVGN -----END PGP SIGNATURE----- Merge tag 'rpmsg-v4.14' of git://github.com/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This extends the Qualcomm GLINK implementation to support the additional features used for communicating with modem and DSP coprocessors in modern Qualcomm platforms. In addition to this there's support for placing virtio RPMSG buffers in non-System RAM" * tag 'rpmsg-v4.14' of git://github.com/andersson/remoteproc: (29 commits) rpmsg: glink: initialize ret to zero to ensure error status check is correct rpmsg: glink: fix null pointer dereference on a null intent dt-bindings: soc: qcom: Extend GLINK to cover SMEM remoteproc: qcom: adsp: Allow defining GLINK edge rpmsg: glink: Export symbols from common code rpmsg: glink: Release idr lock before returning on error rpmsg: glink: Handle remote rx done command rpmsg: glink: Request for intents when unavailable rpmsg: glink: Use the intents passed by remote rpmsg: glink: Receive and store the remote intent buffers rpmsg: glink: Add announce_create ops and preallocate intents rpmsg: glink: Add rx done command rpmsg: glink: Make RX FIFO peak accessor to take an offset rpmsg: glink: Use the local intents when receiving data rpmsg: glink: Add support for TX intents rpmsg: glink: Fix idr_lock from mutex to spinlock rpmsg: glink: Add support for transport version negotiation rpmsg: glink: Introduce glink smem based transport rpmsg: glink: Do a mbox_free_channel in remove rpmsg: glink: Return -EAGAIN when there is no FIFO space ... |
||
|
Linus Torvalds
|
d7efc352ab |
remoteproc updates for v4.14
This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP, TI Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It introduces the Qualcomm restart notifier and a few fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZswmrAAoJEAsfOT8Nma3FVAwP/1SEQkDsfrx9HIVtm9zSy7h5 DJ2dAUVMATJkTiDU8djz/KttL9bOLIcG5u0hiNbtPELm/5t3qAHiN8axO0w5Oxrv 0xO2yIwzxyhOU4cI8k+RWReTcihSqBYs5nHDXXhbhO5IKiaIfAQWljL6H1rL41gH SnKEuQuXfD6j/cvRyHEh10EWfDrVMnaim9aK3OiSz6i6YRyRC3r2VT+KiRnbaLq0 XIk1HATM6xEd6YfAeiuPZh6SbKuEibsBoPVQpAl9HjZvKY+n1dC11solohAEMYFC r222I6LYPRy5eteLnSqhTYof5l+pd9/eECIuXCdvxGfbkPhyPf7/K3WI3iV9sD8a h+QM22IpiwSzxnJPNJzmYtPnhqfOHZQTb64Fp2xiTTYa/ILbSH7VCAohxofEaheS 8rtIJqGhxT1WINvcBaoxwhL/CMMnBL+TlrqlAc5Qjd9zKFhJu4rcv1oQFNGMBMrN WY4R4x//oYgfmagIBEkmxMEcVMoJeI34AsbtSvazmcIQdvpcJ3Y0AMa+Ly0eyzBf RoTJY9y/Q3Y2DjcJoK+6iFeGRo0qI8/ytkKC6wb3RpaTnbDQ39X3GfCICwhsDCh7 uv19AmG5M26VRHxjlNnLpJp8jG3Up335TYQhkXV/CZYZcOxTmfJjGe3ItxOK/tTz YMv+IR72T/M+feeAS4Ge =R9dP -----END PGP SIGNATURE----- Merge tag 'rproc-v4.14' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP, TI Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It introduces the Qualcomm restart notifier and a few fixes" * tag 'rproc-v4.14' of git://github.com/andersson/remoteproc: remoteproc: Introduce rproc handle accessor for children remoteproc: qcom: Make ssr_notifiers local remoteproc: Stop subdevices in reverse order remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller driver remoteproc: qcom: Use PTR_ERR_OR_ZERO remoteproc: st: explicitly request exclusive reset control remoteproc: qcom: explicitly request exclusive reset control remoteproc/keystone: explicitly request exclusive reset control remoteproc/keystone: Add support for Keystone 66AK2G SOCs remoteproc/davinci: Add device tree support for OMAP-L138 DSP dt-bindings: remoteproc: Add bindings for Davinci DSP processors remoteproc/davinci: Add support to parse internal memories remoteproc/davinci: Switch to platform_get_resource_byname() remoteproc: make device_type const soc: qcom: GLINK SSR notifier remoteproc: qcom: Add support for SSR notifications remoteproc: Merge __rproc_boot() with rproc_boot() |
||
|
Linus Torvalds
|
d2d8f51e28 |
Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS - quite some driver updates - cleanups for the i2c-mux subsystem - some subsystem-wide constification - further cleanup of include/linux/i2c * 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits) i2c: sprd: Fix undefined reference errors i2c: nomadik: constify amba_id i2c: versatile: Make i2c_algo_bit_data const i2c: busses: make i2c_adapter_quirks const i2c: busses: make i2c_adapter const i2c: busses: make i2c_algorithm const i2c: Add Spreadtrum I2C controller driver dt-bindings: i2c: Add Spreadtrum I2C controller documentation i2c-cht-wc: make cht_wc_i2c_adap_driver static MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones i2c: i801: Restore the presence state of P2SB PCI device after reading BAR MAINTAINERS: drop entry for Blackfin I2C and Sonic's email blackfin: merge the two TWI header files i2c: davinci: Preserve return value of devm_clk_get i2c: mediatek: Add i2c compatible for MediaTek MT7622 dt-bindings: i2c: Add MediaTek MT7622 i2c binding dt-bindings: i2c: modify information formats i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support ... |
||
|
Geert Uytterhoeven
|
82f6817fd6 |
dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdt
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car D3 (r8a77995) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Andrew Jeffery
|
e654f19165 |
dt-bindings: watchdog: aspeed: External reset signal properties
For the AST2500 and compatible watchdog controllers the external reset signal can be configured for push-pull or open-drain drive types, and in the case of push-pull driving, active low or high. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Christopher Bostic
|
ffbb29d62d |
drivers/watchdog: Add optional ASPEED device tree properties
Describe device tree optional properties:
* aspeed,reset-type = "cpu|soc|system|none"
One of three different, mutually exclusive, values
"cpu" : ARM CPU reset on signal
"soc" : 'System on chip' reset
"system" : Full system reset
The value can also be set to "none" which indicates that no
reset of any kind is to be done via this watchdog. This assumes
another watchdog on the chip is to take care of resets.
* aspeed,external-signal - Generate external signal (WDT1 and WDT2 only)
* aspeed,alt-boot - Boot from alternate block on signal
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
||
|
Sean Wang
|
e8a7fc711c |
dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC
This updates dt-binding documentation for MediaTek MT7622 and MT7623 SoC. For the both SoCs supported all rely on the fallback binding of the case with "mediatek,mt6589-wdt". Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Martin Blumenstingl
|
43a64e81b2 |
watchdog: meson-wdt: add support for the watchdog on Meson8 and Meson8m2
The watchdog IP block on Meson8 and Meson8m2 is already supported by the existing meson-wdt driver. Meson8 uses the same register bits as Meson6, while the newer Meson8m2 SoC uses the same register bits as Meson8b. Currently watchdog support on Meson8 SoC already works because meson8.dtsi simply uses the "amlogic,meson6-wdt" compatible. Adding a separate compatible for Meson8 makes this more explicit though. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Linus Torvalds
|
fbd01410e8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"The iwlwifi firmware compat fix is in here as well as some other
stuff:
1) Fix request socket leak introduced by BPF deadlock fix, from Eric
Dumazet.
2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.
3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
Gao Feng.
4) Use after free in netlink nlk groups handling, from Xin Long.
5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.
6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
with follow-on fix from Eric Dumazet.
7) Need RCU and preemption disabled during generic XDP data patch,
from John Fastabend"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
Revert "mdio_bus: Remove unneeded gpiod NULL check"
bpf: devmap, use cond_resched instead of cpu_relax
bpf: add support for sockmap detach programs
net: rcu lock and preempt disable missing around generic xdp
bpf: don't select potentially stale ri->map from buggy xdp progs
net: tulip: Constify tulip_tbl
net: ethernet: ti: netcp_core: no need in netif_napi_del
davicom: Display proper debug level up to 6
net: phy: sfp: rename dt properties to match the binding
dt-binding: net: sfp binding documentation
dt-bindings: add SFF vendor prefix
dt-bindings: net: don't confuse with generic PHY property
ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
ip_tunnel: fix setting ttl and tos value in collect_md mode
ipv6: fix typo in fib6_net_exit()
tcp: fix a request socket leak
sctp: fix missing wake ups in some situations
netfilter: xt_hashlimit: fix build error caused by 64bit division
netfilter: xt_hashlimit: alloc hashtable with right size
...
|
||
|
Linus Torvalds
|
fbf4432ff7 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - most of the rest of MM - a small number of misc things - lib/ updates - checkpatch - autofs updates - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits) ipc: optimize semget/shmget/msgget for lots of keys ipc/sem: play nicer with large nsops allocations ipc/sem: drop sem_checkid helper ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t ipc: convert ipc_namespace.count from atomic_t to refcount_t kcov: support compat processes sh: defconfig: cleanup from old Kconfig options mn10300: defconfig: cleanup from old Kconfig options m32r: defconfig: cleanup from old Kconfig options drivers/pps: use surrounding "if PPS" to remove numerous dependency checks drivers/pps: aesthetic tweaks to PPS-related content cpumask: make cpumask_next() out-of-line kmod: move #ifdef CONFIG_MODULES wrapper to Makefile kmod: split off umh headers into its own file MAINTAINERS: clarify kmod is just a kernel module loader kmod: split out umh code into its own file test_kmod: flip INT checks to be consistent test_kmod: remove paranoid UINT_MAX check on uint range processing vfat: deduplicate hex2bin() ... |
||
|
Baruch Siach
|
3ef3714000 |
dt-binding: net: sfp binding documentation
Add device-tree binding documentation SFP transceivers. Support for SFP transceivers has been recently introduced (drivers/net/phy/sfp.c). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Baruch Siach
|
165da35857 |
dt-bindings: add SFF vendor prefix
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Baruch Siach
|
c43593d81a |
dt-bindings: net: don't confuse with generic PHY property
This complements commit
|
||
|
Robert P. J. Day
|
a2d8180301 |
drivers/pps: aesthetic tweaks to PPS-related content
Collection of aesthetic adjustments to various PPS-related files, directories and Documentation, some quite minor just for the sake of consistency, including: * Updated example of pps device tree node (courtesy Rodolfo G.) * "PPS-API" -> "PPS API" * "pps_source_info_s" -> "pps_source_info" * "ktimer driver" -> "pps-ktimer driver" * "ppstest /dev/pps0" -> "ppstest /dev/pps1" to match example * Add missing PPS-related entries to MAINTAINERS file * Other trivialities Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261048220.8106@localhost.localdomain Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
ee89252b9e |
ARC changes for 4.14-rc1
- support for HSDK board hosting a Quad core HS38x4 based SoC running @ 1 GHz
(and some prerrquisite changes such as ability to scoot the kernel code/data
from start of memory map etc)
- Quite a few updates for EZChip (Mellanox) platform
- Fixes to fault/exception printing
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZstaxAAoJEGnX8d3iisJe5I0QAIExIdU5/V/bgJ7EJJaa6qW4
VxB5HXzbwOuIx/3i/uv4AwBIoeZIzuRQnjwf2dzTJms5vjT2zR08DGYIBmtSAA23
ZUmpZVd865IItLCRM7WOerP6B6gaHaObzNlZoo2d8rVnz0fruc5Td4PDC1Esfs7D
vA4aITbiG6FsJMYFeYR6IKJbM8D1CmB2Gm1gEPIifniJ9dy/V9Xi5ttvISpVJSNx
QMb6PDHVEpkOBypUEJKeoClFZlkeqscejjXmZ3QrhoeHM//3hX8MdvyvFBmoCY4t
YpmmrfmoCupwFFn7+XDwYqDyYvJk/H84n64tUcpM7PLqCuw4BaMhd3KTjkTwvsnN
H5NAhqbHIW3r4a9esn53yvgY8zk9i6U7qmhKpEwkUQTtUZ7XrdfL1H1t08cqtxPX
/eFBkeKNshJy8EU02MewtxvWXON3RoJC3qgHoLkrj+iq5HTQjaDEahbQNm+rnXFI
EdRMBwPX2sXOvB/m/jQYjz6QM1QTl6zHy+tXbBpATIqgRxsp6SIInqGmq7fC032a
K7zPWo2Vf2LLl4ifhFJaYwbrQotqDGe/F72K1C5RcWKLnhMPdLgZ4Lwf0NcJTeDt
DjmqUFXwNdQ2Ydw0B9JxeTddVCzdLHPQqxOOvvBI0vvgsF8AFmAmx2QhMdQTsZJr
73mD3udrQN48yYzAIZQf
=w8CJ
-----END PGP SIGNATURE-----
Merge tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- Support for HSDK board hosting a Quad core HS38x4 based SoC running
@1GHz (and some prerrquisite changes such as ability to scoot the
kernel code/data from start of memory map etc)
- Quite a few updates for EZChip (Mellanox) platform
- Fixes to fault/exception printing
* tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (26 commits)
ARC: Re-enable MMU upon Machine Check exception
ARC: Show fault information passed to show_kernel_fault_diag()
ARC: [plat-hsdk] initial port for HSDK board
ARC: mm: Decouple RAM base address from kernel link address
ARCv2: IOC: Tighten up the contraints (specifically base / size alignment)
ARC: [plat-axs103] refactor the DT fudging code
ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clk
ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk setting
ARCv2: SLC: provide a line based flush routine for debugging
ARC: Hardcode ARCH_DMA_MINALIGN to max line length we may have
ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exit
ARC: [plat-eznps] handle extra aux regs #1: save/restore on context switch
ARC: [plat-eznps] avoid toggling of DPC register
ARC: [plat-eznps] Update the init sequence of aux regs per cpu.
ARC: [plat-eznps] new command line argument for HW scheduler at MTM
ARC: set boot print log level to PR_INFO
ARC: [plat-eznps] Handle user memory error same in simulation and silicon
ARC: [plat-eznps] use schd.wft instruction instead of sleep at idle task
ARC: create cpu specific version of arch_cpu_idle()
ARC: [plat-eznps] spinlock aware for MTM
...
|