Commit Graph

4366 Commits

Author SHA1 Message Date
Nicholas Piggin
05a4a95279 kernel/watchdog: split up config options
Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split
HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR.

LOCKUP_DETECTOR implies the general boot, sysctl, and programming
interfaces for the lockup detectors.

An architecture that wants to use a hard lockup detector must define
HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH.

Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the
minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and
does not implement the LOCKUP_DETECTOR interfaces.

sparc is unusual in that it has started to implement some of the
interfaces, but not fully yet.  It should probably be converted to a full
HAVE_HARDLOCKUP_DETECTOR_ARCH.

[npiggin@gmail.com: fix]
  Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com
Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:02 -07:00
Dmitry Vyukov
e41d58185f fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:

 "Write to this file of integer N makes N-th call in the current task
  fail (N is 0-based). Read from this file returns a single char 'Y' or
  'N' that says if the fault setup with a previous write to this file
  was injected or not, and disables the fault if it wasn't yet injected.
  Note that this file enables all types of faults (slab, futex, etc).
  This setting takes precedence over all other generic settings like
  probability, interval, times, etc. But per-capability settings (e.g.
  fail_futex/ignore-private) take precedence over it. This feature is
  intended for systematic testing of faults in a single system call. See
  an example below"

Why add a new setting:
1. Existing settings are global rather than per-task.
   So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
   which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
   of all of probability, interval, times, space, task-filter and
   unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
   types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
   stress testing better be done from an unprivileged user.
   Similarly, this would require opening the debugfs files to the
   unprivileged user, as he would need to reopen at least times file
   (not possible to pre-open before dropping privs).

The proposed interface solves all of the above (see the example).

We want to integrate this into syzkaller fuzzer.  A prototype has found
10 bugs in kernel in first day of usage:

  https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance

I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned.  So I am fine with the current
version of the code.

[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:01 -07:00
Luis R. Rodriguez
7c43a657a4 test_sysctl: test against int proc_dointvec() array support
Add a few initial respective tests for an array:

  o Echoing values separated by spaces works
  o Echoing only first elements will set first elements
  o Confirm PAGE_SIZE limit still applies even if an array is used

Link: http://lkml.kernel.org/r/20170630224431.17374-7-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
2920fad3a5 test_sysctl: add simple proc_douintvec() case
Test against a simple proc_douintvec() case.  While at it, add a test
against UINT_MAX.  Make sure UINT_MAX works, and UINT_MAX+1 will fail
and that negative values are not accepted.

Link: http://lkml.kernel.org/r/20170630224431.17374-6-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
eb965eda1c test_sysctl: add simple proc_dointvec() case
Test against a simple proc_dointvec() case.  While at it, add a test
against INT_MAX.  Make sure INT_MAX works, and INT_MAX+1 will fail.
Also test negative values work.

Link: http://lkml.kernel.org/r/20170630224431.17374-5-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
9308f2f9e7 test_sysctl: add dedicated proc sysctl test driver
The existing tools/testing/selftests/sysctl/ tests include two test
cases, but these use existing production kernel sysctl interfaces.  We
want to expand test coverage but we can't just be looking for random
safe production values to poke at, that's just insane!

Instead just dedicate a test driver for debugging purposes and port the
existing scripts to use it.  This will make it easier for further tests
to be added.

Subsequent patches will extend our test coverage for sysctl.

The stress test driver uses a new license (GPL on Linux, copyleft-next
outside of Linux).  Linus was fine with this [0] and later due to Ted's
and Alans's request ironed out an "or" language clause to use [1] which
is already present upstream.

[0] https://lkml.kernel.org/r/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com
[1] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com

Link: http://lkml.kernel.org/r/20170630224431.17374-2-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Sergey Senozhatsky
166a0f780a lib/bsearch.c: micro-optimize pivot position calculation
There is a slightly faster way (in terms of the number of instructions
being used) to calculate the position of a middle element, preserving
integer overflow safeness.

./scripts/bloat-o-meter lib/bsearch.o.old lib/bsearch.o.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
function                                     old     new   delta
bsearch                                      122      98     -24

TEST

INT array of size 100001, elements [0..100000]. gcc 7.1, Os, x86_64.

a) bsearch() of existing key "100001 - 2":

BASE
====

$ perf stat ./a.out

 Performance counter stats for './a.out':

        619.445196      task-clock:u (msec)       #    0.999 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               133      page-faults:u             #    0.215 K/sec
     1,949,517,279      cycles:u                  #    3.147 GHz                      (83.06%)
       181,017,938      stalled-cycles-frontend:u #    9.29% frontend cycles idle     (83.05%)
        82,959,265      stalled-cycles-backend:u  #    4.26% backend cycles idle      (67.02%)
     4,355,706,383      instructions:u            #    2.23  insn per cycle
                                                  #    0.04  stalled cycles per insn  (83.54%)
     1,051,539,242      branches:u                # 1697.550 M/sec                    (83.54%)
        15,263,381      branch-misses:u           #    1.45% of all branches          (83.43%)

       0.620082548 seconds time elapsed

PATCHED
=======

$ perf stat ./a.out

 Performance counter stats for './a.out':

        475.097316      task-clock:u (msec)       #    0.999 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               135      page-faults:u             #    0.284 K/sec
     1,487,467,717      cycles:u                  #    3.131 GHz                      (82.95%)
       186,537,162      stalled-cycles-frontend:u #   12.54% frontend cycles idle     (82.93%)
        28,797,869      stalled-cycles-backend:u  #    1.94% backend cycles idle      (67.10%)
     3,807,564,203      instructions:u            #    2.56  insn per cycle
                                                  #    0.05  stalled cycles per insn  (83.57%)
     1,049,344,291      branches:u                # 2208.693 M/sec                    (83.60%)
             5,485      branch-misses:u           #    0.00% of all branches          (83.58%)

       0.475760235 seconds time elapsed

b) bsearch() of un-existing key "100001 + 2":

BASE
====

$ perf stat ./a.out

 Performance counter stats for './a.out':

        499.244480      task-clock:u (msec)       #    0.999 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               132      page-faults:u             #    0.264 K/sec
     1,571,194,855      cycles:u                  #    3.147 GHz                      (83.18%)
        13,450,980      stalled-cycles-frontend:u #    0.86% frontend cycles idle     (83.18%)
        21,256,072      stalled-cycles-backend:u  #    1.35% backend cycles idle      (66.78%)
     4,171,197,909      instructions:u            #    2.65  insn per cycle
                                                  #    0.01  stalled cycles per insn  (83.68%)
     1,009,175,281      branches:u                # 2021.405 M/sec                    (83.79%)
             3,122      branch-misses:u           #    0.00% of all branches          (83.37%)

       0.499871144 seconds time elapsed

PATCHED
=======

$ perf stat ./a.out

 Performance counter stats for './a.out':

        399.023499      task-clock:u (msec)       #    0.998 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               134      page-faults:u             #    0.336 K/sec
     1,245,793,991      cycles:u                  #    3.122 GHz                      (83.39%)
        11,529,273      stalled-cycles-frontend:u #    0.93% frontend cycles idle     (83.46%)
        12,116,311      stalled-cycles-backend:u  #    0.97% backend cycles idle      (66.92%)
     3,679,710,005      instructions:u            #    2.95  insn per cycle
                                                  #    0.00  stalled cycles per insn  (83.47%)
     1,009,792,625      branches:u                # 2530.660 M/sec                    (83.46%)
             2,590      branch-misses:u           #    0.00% of all branches          (83.12%)

       0.399733539 seconds time elapsed

Link: http://lkml.kernel.org/r/20170607150457.5905-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Thomas Meyer
a94c33dd1f lib/extable.c: use bsearch() library function in search_extable()
[thomas@m3y3r.de: v3: fix arch specific implementations]
  Link: http://lkml.kernel.org/r/1497890858.12931.7.camel@m3y3r.de
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Michal Hocko
12e8fd6fd3 lib/rhashtable.c: use kvzalloc() in bucket_table_alloc() when possible
bucket_table_alloc() can be currently called with GFP_KERNEL or
GFP_ATOMIC.  For the former we basically have an open coded kvzalloc()
while the later only uses kzalloc().  Let's simplify the code a bit by
the dropping the open coded path and replace it with kvzalloc().

Link: http://lkml.kernel.org/r/20170531155145.17111-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
c46ecce431 lib/interval_tree_test.c: allow full tree search
...  such that a user can specify visiting all the nodes in the tree
(intersects with the world).  This is a nice opposite from the very
basic default query which is a single point.

Link: http://lkml.kernel.org/r/20170518174936.20265-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
a8ec14d4f6 lib/interval_tree_test.c: allow users to limit scope of endpoint
Add a 'max_endpoint' parameter such that users may easily limit the size
of the intervals that are randomly generated.

Link: http://lkml.kernel.org/r/20170518174936.20265-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
a54dae0338 lib/interval_tree_test.c: make test options module parameters
Allows for more flexible debugging.

Link: http://lkml.kernel.org/r/20170518174936.20265-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
0f789b6764 lib/interval_tree_test.c: allow the module to be compiled-in
Patch series "lib/interval_tree_test: some debugging improvements".

Here are some patches that update the interval_tree_test module allowing
users to pass finer grained options to run the actual test.

This patch (of 4):

It is a tristate after all, and also serves well for quick debugging.

Link: http://lkml.kernel.org/r/20170518174936.20265-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Alexey Dobriyan
be5f3c7774 lib/kstrtox.c: use "unsigned int" more
gcc does generates stupid code sign extending data back and forth.  Help
by using "unsigned int".

	add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-61 (-61)
	function                                     old     new   delta
	_parse_integer                               128     123      -5

It _still_ does generate useless MOVSX but I don't know how to delete it:

0000000000000070 <_parse_integer>:
			...
  a0:   89 c2                   mov    edx,eax
  a2:   83 e8 30                sub    eax,0x30
  a5:   83 f8 09                cmp    eax,0x9
  a8:   76 11                   jbe    bb <_parse_integer+0x4b>
  aa:   83 ca 20                or     edx,0x20
  ad:   0f be c2      ===>      movsx  eax,dl         <===
			useless
  b0:   8d 50 9f                lea    edx,[rax-0x61]
  b3:   83 fa 05                cmp    edx,0x5

Patch also helps on embedded archs which generally only like "int".  On
arm "and 0xff" is generated which is waste because all values used in
comparisons are positive.

Link: http://lkml.kernel.org/r/20170514194720.GB32563@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Alexey Dobriyan
512750ef8b lib/kstrtox.c: delete end-of-string test
Standard "while (*s)" test is unnecessary because NUL won't pass
valid-digit test anyway.  Save one branch per parsed character.

Link: http://lkml.kernel.org/r/20170514193756.GA32563@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Matthew Wilcox
e5af323c9b bitmap: optimise bitmap_set and bitmap_clear of a single bit
We have eight users calling bitmap_clear for a single bit and seventeen
calling bitmap_set for a single bit.  Rather than fix all of them to
call __clear_bit or __set_bit, turn bitmap_clear and bitmap_set into
inline functions and make this special case efficient.

Link: http://lkml.kernel.org/r/20170628153221.11322-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Matthew Wilcox
3cc78125a0 lib/test_bitmap.c: add optimisation tests
Patch series "Bitmap optimisations", v2.

These three bitmap patches use more efficient specialisations when the
compiler can figure out that it's safe to do so.  Thanks to Rasmus's
eagle eyes, a nasty bug in v1 was avoided, and I've added a test case
which would have caught it.

This patch (of 4):

This version of the test is actually a no-op; the next patch will enable
it.

Link: http://lkml.kernel.org/r/20170628153221.11322-2-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Linus Torvalds
2ceedf97ae dmaengine updates for 4.13-rc1
- removal of AVR32 support in dw driver as AVR32 is gone
  - new driver for Broadcom stream buffer accelerator (SBA) RAID driver
  - add support for Faraday Technology FTDMAC020 in amba-pl08x driver
  - IOMMU support in pl330 driver
  - updates to bunch of drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZYG73AAoJEHwUBw8lI4NH+DoP/1f0TsYrQFCjNqa4nybjU1Sd
 bbqnpouuJscwt8Qk2LGuSimi0QG91gQOLvrmueFbXtEg86nPOfa0RnWGNF4qwYFK
 oliDlXF2PnV65J5kl7CvqXCj6bFiXCULVdO9JD2HFoFB1+lzXN9JQqOG5ne29BQ6
 g3HNRlUTXNzQXWisgbAOLxuuvyfv68Zo3wCLYLkd4vC/C4zmxM+KXUG8+s0hS7t3
 AOUpYW6F/C+y1Ax+SiACm0QGNZ4rc6/+ZUIIXUO5CfTYGjv6QUdzxiLHtc4br25l
 2CoN9IP4V/OxHaW9T1jA61TeAAFr63oXYfDMBBzclzVryZRAIU72ups31uRQXpFz
 99zUQ0OsdOCvy0oPInhNd8u+cpyh/4e2RDgSZ9rxw3xVaKFh8lsw5OtcCBQzCMeI
 xgFCUBHsLjEi4uafJcl6n2T7+Y4Y0KgOmxPHZo3tpq/2a5M6tVy8k68m3afCQylF
 1SOxzVZdDRUutPpviQWop6RgP0EcVuzaUJ0vO4nat4j77vuimaPqdk+oLV46XP2d
 5I52kcvbVI4BbJavTjVs3FRdcez0pW37iOw+5MOxHE3dnBp4X/3btFzBY4aOsdg0
 wVut3B+9U4WHDBF2ConBxxMvGqMYmcssOQ096GdC6oBHHS7x6n7tEVPiZ5iUacn5
 LB8k9AZtpBC7nUWPH7FS
 =srPZ
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - removal of AVR32 support in dw driver as AVR32 is gone

 - new driver for Broadcom stream buffer accelerator (SBA) RAID driver

 - add support for Faraday Technology FTDMAC020 in amba-pl08x driver

 - IOMMU support in pl330 driver

 - updates to bunch of drivers

* tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: qcom_hidma: correct API violation for submit
  dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy
  dmaengine: tegra-apb: Really fix runtime-pm usage
  dmaengine: fsl_raid: make of_device_ids const.
  dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden
  dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly
  dmaengine: Kconfig: Simplify the help text for MXS_DMA
  dmaengine: pl330: Delete unused functions
  dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
  dmaengine: Kconfig: Extend the dependency for MXS_DMA
  dmaengine: mxs: Use %zu for printing a size_t variable
  dmaengine: ste_dma40: Cleanup scatterlist layering violations
  dmaengine: imx-dma: cleanup scatterlist layering violations
  dmaengine: use proper name for the R-Car SoC
  dmaengine: imx-sdma: Fix compilation warning.
  dmaengine: imx-sdma: Handle return value of clk_prepare_enable
  dmaengine: pl330: Add IOMMU support to slave tranfers
  dmaengine: DW DMAC: Handle return value of clk_prepare_enable
  dmaengine: pl08x: use GENMASK() to create bitmasks
  dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
  ...
2017-07-08 12:36:50 -07:00
Linus Torvalds
6a37e94009 Merge branch 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter hardening from Al Viro:
 "This is the iov_iter/uaccess/hardening pile.

  For one thing, it trims the inline part of copy_to_user/copy_from_user
  to the minimum that *does* need to be inlined - object size checks,
  basically. For another, it sanitizes the checks for iov_iter
  primitives. There are 4 groups of checks: access_ok(), might_fault(),
  object size and KASAN.

   - access_ok() had been verified by whoever had set the iov_iter up.
     However, that has happened in a function far away, so proving that
     there's no path to actual copying bypassing those checks is hard
     and proving that iov_iter has not been buggered in the meanwhile is
     also not pleasant. So we want those redone in actual
     copyin/copyout.

   - might_fault() is better off consolidated - we know whether it needs
     to be checked as soon as we enter iov_iter primitive and observe
     the iov_iter flavour. No need to wait until the copyin/copyout. The
     call chains are short enough to make sure we won't miss anything -
     in fact, it's more robust that way, since there are cases where we
     do e.g. forced fault-in before getting to copyin/copyout. It's not
     quite what we need to check (in particular, combination of
     iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
     cause to skip checks), but that's for later series. For now let's
     keep might_fault().

   - KASAN checks belong in copyin/copyout - at the same level where
     other iov_iter flavours would've hit them in memcpy().

   - object size checks should apply to *all* iov_iter flavours, not
     just iovec-backed ones.

  There are two groups of primitives - one gets the kernel object
  described as pointer + size (copy_to_iter(), etc.) while another gets
  it as page + offset + size (copy_page_to_iter(), etc.)

  For the first group the checks are best done where we actually have a
  chance to find the object size. In other words, those belong in inline
  wrappers in uio.h, before calling into iov_iter.c. Same kind as we
  have for inlined part of copy_to_user().

  For the second group there is no object to look at - offset in page is
  just a number, it bears no type information. So we do them in the
  common helper called by iov_iter.c primitives of that kind. All it
  currently does is checking that we are not trying to access outside of
  the compound page; eventually we might want to add some sanity checks
  on the page involved.

  So the things we need in copyin/copyout part of iov_iter.c do not
  quite match anything in uaccess.h (we want no zeroing, we *do* want
  access_ok() and KASAN and we want no might_fault() or object size
  checks done on that level). OTOH, these needs are simple enough to
  provide a couple of helpers (static in iov_iter.c) doing just what we
  need..."

* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: saner checks on copyin/copyout
  iov_iter: sanity checks for copy to/from page primitives
  iov_iter/hardening: move object size checks to inlined part
  copy_{to,from}_user(): consolidate object size checks
  copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
2017-07-07 20:39:20 -07:00
Linus Torvalds
088737f44b Writeback error handling fixes (pile #2)
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXhmCAAoJEAAOaEEZVoIVpRkP/1qlYn3pq6d5Kuz84pejOmlL
 5jbkS/cOmeTxeUU4+B1xG8Lx7bAk8PfSXQOADbSJGiZd0ug95tJxplFYIGJzR/tG
 aNMHeu/BVKKhUKORGuKR9rJKtwC839L/qao+yPBo5U3mU4L73rFWX8fxFuhSJ8HR
 hvkgBu3Hx6GY59CzxJ8iJzj+B+uPSFrNweAk0+0UeWkBgTzEdiGqaXBX4cHIkq/5
 hMoCG+xnmwHKbCBsQ5js+YJT+HedZ4lvfjOqGxgElUyjJ7Bkt/IFYOp8TUiu193T
 tA4UinDjN8A7FImmIBIftrECmrAC9HIGhGZroYkMKbb8ReDR2ikE5FhKEpuAGU3a
 BXBgX2mPQuArvZWM7qeJCkxV9QJ0u/8Ykbyzo30iPrICyrzbEvIubeB/mDA034+Z
 Z0/z8C3v7826F3zP/NyaQEojUgRq30McMOIS8GMnx15HJwRsRKlzjfy9Wm4tWhl0
 t3nH1jMqAZ7068s6rfh/oCwdgGOwr5o4hW/bnlITzxbjWQUOnZIe7KBxIezZJ2rv
 OcIwd5qE8PNtpagGj5oUbnjGOTkERAgsMfvPk5tjUNt28/qUlVs2V0aeo47dlcsh
 oYr8WMOIzw98Rl7Bo70mplLrqLD6nGl0LfXOyUlT4STgLWW4ksmLVuJjWIUxcO/0
 yKWjj9wfYRQ0vSUqhsI5
 =3Z93
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull Writeback error handling updates from Jeff Layton:
 "This pile represents the bulk of the writeback error handling fixes
  that I have for this cycle. Some of the earlier patches in this pile
  may look trivial but they are prerequisites for later patches in the
  series.

  The aim of this set is to improve how we track and report writeback
  errors to userland. Most applications that care about data integrity
  will periodically call fsync/fdatasync/msync to ensure that their
  writes have made it to the backing store.

  For a very long time, we have tracked writeback errors using two flags
  in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
  writeback error occurs (via mapping_set_error) and are cleared as a
  side-effect of filemap_check_errors (as you noted yesterday). This
  model really sucks for userland.

  Only the first task to call fsync (or msync or fdatasync) will see the
  error. Any subsequent task calling fsync on a file will get back 0
  (unless another writeback error occurs in the interim). If I have
  several tasks writing to a file and calling fsync to ensure that their
  writes got stored, then I need to have them coordinate with one
  another. That's difficult enough, but in a world of containerized
  setups that coordination may even not be possible.

  But wait...it gets worse!

  The calls to filemap_check_errors can be buried pretty far down in the
  call stack, and there are internal callers of filemap_write_and_wait
  and the like that also end up clearing those errors. Many of those
  callers ignore the error return from that function or return it to
  userland at nonsensical times (e.g. truncate() or stat()). If I get
  back -EIO on a truncate, there is no reason to think that it was
  because some previous writeback failed, and a subsequent fsync() will
  (incorrectly) return 0.

  This pile aims to do three things:

   1) ensure that when a writeback error occurs that that error will be
      reported to userland on a subsequent fsync/fdatasync/msync call,
      regardless of what internal callers are doing

   2) report writeback errors on all file descriptions that were open at
      the time that the error occurred. This is a user-visible change,
      but I think most applications are written to assume this behavior
      anyway. Those that aren't are unlikely to be hurt by it.

   3) document what filesystems should do when there is a writeback
      error. Today, there is very little consistency between them, and a
      lot of cargo-cult copying. We need to make it very clear what
      filesystems should do in this situation.

  To achieve this, the set adds a new data type (errseq_t) and then
  builds new writeback error tracking infrastructure around that. Once
  all of that is in place, we change the filesystems to use the new
  infrastructure for reporting wb errors to userland.

  Note that this is just the initial foray into cleaning up this mess.
  There is a lot of work remaining here:

   1) convert the rest of the filesystems in a similar fashion. Once the
      initial set is in, then I think most other fs' will be fairly
      simple to convert. Hopefully most of those can in via individual
      filesystem trees.

   2) convert internal waiters on writeback to use errseq_t for
      detecting errors instead of relying on the AS_* flags. I have some
      draft patches for this for ext4, but they are not quite ready for
      prime time yet.

  This was a discussion topic this year at LSF/MM too. If you're
  interested in the gory details, LWN has some good articles about this:

      https://lwn.net/Articles/718734/
      https://lwn.net/Articles/724307/"

* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  btrfs: minimal conversion to errseq_t writeback error reporting on fsync
  xfs: minimal conversion to errseq_t writeback error reporting
  ext4: use errseq_t based error handling for reporting data writeback errors
  fs: convert __generic_file_fsync to use errseq_t based reporting
  block: convert to errseq_t based writeback error tracking
  dax: set errors in mapping when writeback fails
  Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
  mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
  fs: new infrastructure for writeback error handling and reporting
  lib: add errseq_t type and infrastructure for handling it
  mm: don't TestClearPageError in __filemap_fdatawait_range
  mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
  jbd2: don't clear and reset errors after waiting on writeback
  buffer: set errors in mapping at the time that the error occurs
  fs: check for writeback errors after syncing out buffers in generic_file_fsync
  buffer: use mapping_set_error instead of setting the flag
  mm: fix mapping_set_error call in me_pagecache_dirty
2017-07-07 19:38:17 -07:00
Linus Torvalds
dd6ec12f3b DeviceTree for 4.13:
- vsprintf format specifier %pOF for device_node's. This will enable us
   to stop storing the full node names. Conversion of users will happen
   next cycle.
 
 - Update documentation to point to DT specification instead of ePAPR.
 
 - Split out graph and property functions to a separate file.
 
 - New of-graph functions for ALSA
 
 - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull,
   Itead, and BananaPi.
 
 - Improve dtx_diff utility filename printing.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJZXpNsEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcO2gg//
 VxhXDs6+oTkBCUzVtEHue/yv44q8Sa7M3jY3/VqVSLa3Eopp/4dmDgBAtWYYX2ou
 KfUl0+yD4cSKhw6oxycwsaS61zf8JkM4sbXYQTphty/5lwxq0/i3OGj98Uk9w9JH
 kM+b1Wi7Z6GBzqh1GuS4E+ADSktMadxd0LugXZvDEMVQZusv/nzWxzq/bdMUqW19
 0nvBL9ABRAPirhBuMSWpYlEEkwQn7JF3LO3i8IBDhhFzMsvbfR7cTp+ydt6I2pk8
 h8DxlsaPIOWH5KePNEmzsd1VlV/HcNl7/vZb0ev0Eb94TLHJRJ7V0ZMQxc5vxHgN
 x6aMlBLHGzG6LI5CV30pWAD/qrrtXNbqmlj1Qjd+FXen6NuQSngSfo5aXzXrM6X5
 ZUD7ou9KzYObraOarU6w2qSICok85bGQHOiBQDVTmE4E/4AVscnc1VQi/rTHrt2O
 Yt3AV8iwaum8q2PVOVKdy8tu7x/7BzBdSObYtjjMIuWcrInnlIyUkmehtCl38kqV
 fd6OIVEOhTJTr0CYDiXEbKtG81j7JhoREdVZvzcEhWFGt/98Rjc9tkTihhFzky4m
 D6lpzpf8mvemrBiMegyQbhVcfHyo0fJe+6giV7cssf2Xhe1QkC15UXywbccO7xFJ
 nf3yqCl8YVEPG0l1MrR+YEHHcnr4ZIEZpejOv+SzZeg=
 =DNwf
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - vsprintf format specifier %pOF for device_node's. This will enable us
   to stop storing the full node names. Conversion of users will happen
   next cycle.

 - Update documentation to point to DT specification instead of ePAPR.

 - Split out graph and property functions to a separate file.

 - New of-graph functions for ALSA

 - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull,
   Itead, and BananaPi.

 - Improve dtx_diff utility filename printing.

* tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits)
  of: document /sys/firmware/fdt
  dt-bindings: Add RISC-V vendor prefix
  vsprintf: Add %p extension "%pOF" for device tree
  of: find_node_by_full_name rewrite to compare each level
  of: use kbasename instead of open coding
  dt-bindings: thermal: add file extension to brcm,ns-thermal
  of: update ePAPR references to point to Devicetree Specification
  scripts/dtc: dtx_diff - Show real file names in diff header
  of: detect invalid phandle in overlay
  of: be consistent in form of file mode
  of: make __of_attach_node() static
  of: address.c header comment typo
  of: fdt.c header comment typo
  of: make of_fdt_is_compatible() static
  dt-bindings: display-timing.txt convert non-ascii characters to ascii
  Documentation: remove overlay-notes reference to non-existent file
  dt-bindings: usb: exynos-usb: Add missing required VDD properties
  dt-bindings: Add vendor prefix for Linksys
  MAINTAINERS: add device tree ABI documentation file
  of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd
  ...
2017-07-07 10:37:54 -07:00
Linus Torvalds
b6ffe9ba46 libnvdimm for 4.13
* Introduce the _flushcache() family of memory copy helpers and use them
   for persistent memory write operations on x86. The _flushcache()
   semantic indicates that the cache is either bypassed for the copy
   operation (movnt) or any lines dirtied by the copy operation are
   written back (clwb, clflushopt, or clflush).
 
 * Extend dax_operations with ->copy_from_iter() and ->flush()
   operations. These operations and other infrastructure updates allow
   all persistent memory specific dax functionality to be pushed into
   libnvdimm and the pmem driver directly. It also allows dax-specific
   sysfs attributes to be linked to a host device, for example:
       /sys/block/pmem0/dax/write_cache
 
 * Add support for the new NVDIMM platform/firmware mechanisms introduced
   in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
   label format, extensions to the address-range-scrub command set, new
   error injection commands, and a new BTT (block-translation-table)
   layout. These updates support inter-OS and pre-OS compatibility.
 
 * Fix a longstanding memory corruption bug in nfit_test.
 
 * Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
   capable.
 
 * Miscellaneous fixes and small updates across libnvdimm and the nfit
   driver.
 
 Acknowledgements that came after the branch was pushed:
 
 commit 6aa734a2f3 "libnvdimm, region, pmem: fix 'badblocks'
   sysfs_get_dirent() reference lifetime"
 Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXsUtAAoJEB7SkWpmfYgCOXcP/06bncqTEvtgrOF2b7O8w+8e
 mTySD51RUn6UpkFd37SMRch+rmbojuqj465TAE7XIXgyLgIOJixKaTlHYUoEnP3X
 rC4Q/g5mN0nittMDwL+vQaa1lQWd2kbjOlrqCgnLHVEEJpHmiQussunjvir4G1U7
 5ROooP8W+qMK5y5XPLJAg/gyGhYkjpRSlDg3Eo5meZZ0IdURbI7+WCLKrPcQUERT
 WmDc9gLhJdSQVxBV/0m2gdAER4ADmFjcrlm8kjXRBhdlUmEFjM0zpvlHJutHTkks
 rNZWCmCJs0Sas+DmRKszFmvVFHRHqUVA3dWK4P6PJEX+tl7BwlPcxpbfacHTG2EZ
 btArFc584DZ+EIrim1cXXRvLFlxnKOFBtBeteFs7l2kZjEcN6S4I5OZgTyeDpe/i
 2WDpHWLQWibkcIzH9y1EuMBkYnQjTJl1pecHzJoTaC+jAQ+opLiY7EecjLmCmQS6
 MBYUeQZNufLGfT5b8KXfpKeiXhpFkYrAGp+ErfoH/6RKy2zqTdagN1yVhos2y+a7
 JJu/Weetpn8qv+KTGUShO8TGyWv3wU46YkG2rKWl0FL1+C+6LMMw1/L0A97lwVlg
 BpypVVyaNu1D22ifZ8O5wbqPIYghoZ5akA0CiduhX19cpl5rTeTd8EvLjvcYhZEZ
 pMHuMAqIcIyLhIe2/sRF
 =xKQB
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "libnvdimm updates for the latest ACPI and UEFI specifications. This
  pull request also includes new 'struct dax_operations' enabling to
  undo the abuse of copy_user_nocache() for copy operations to pmem.

  The dax work originally missed 4.12 to address concerns raised by Al.

  Summary:

   - Introduce the _flushcache() family of memory copy helpers and use
     them for persistent memory write operations on x86. The
     _flushcache() semantic indicates that the cache is either bypassed
     for the copy operation (movnt) or any lines dirtied by the copy
     operation are written back (clwb, clflushopt, or clflush).

   - Extend dax_operations with ->copy_from_iter() and ->flush()
     operations. These operations and other infrastructure updates allow
     all persistent memory specific dax functionality to be pushed into
     libnvdimm and the pmem driver directly. It also allows dax-specific
     sysfs attributes to be linked to a host device, for example:
     /sys/block/pmem0/dax/write_cache

   - Add support for the new NVDIMM platform/firmware mechanisms
     introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
     namespace label format, extensions to the address-range-scrub
     command set, new error injection commands, and a new BTT
     (block-translation-table) layout. These updates support inter-OS
     and pre-OS compatibility.

   - Fix a longstanding memory corruption bug in nfit_test.

   - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
     capable.

   - Miscellaneous fixes and small updates across libnvdimm and the nfit
     driver.

  Acknowledgements that came after the branch was pushed: commit
  6aa734a2f3 ("libnvdimm, region, pmem: fix 'badblocks'
  sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
  <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
  libnvdimm, namespace: record 'lbasize' for pmem namespaces
  acpi/nfit: Issue Start ARS to retrieve existing records
  libnvdimm: New ACPI 6.2 DSM functions
  acpi, nfit: Show bus_dsm_mask in sysfs
  libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
  acpi, nfit: Enable DSM pass thru for root functions.
  libnvdimm: passthru functions clear to send
  libnvdimm, btt: convert some info messages to warn/err
  libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
  libnvdimm: fix the clear-error check in nsio_rw_bytes
  libnvdimm, btt: fix btt_rw_page not returning errors
  acpi, nfit: quiet invalid block-aperture-region warnings
  libnvdimm, btt: BTT updates for UEFI 2.7 format
  acpi, nfit: constify *_attribute_group
  libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
  libnvdimm, pmem, dax: export a cache control attribute
  dax: convert to bitmask for flags
  dax: remove default copy_from_iter fallback
  libnvdimm, nfit: enable support for volatile ranges
  libnvdimm, pmem: fix persistence warning
  ...
2017-07-07 09:44:06 -07:00
Al Viro
09fc68dc66 iov_iter: saner checks on copyin/copyout
* might_fault() is better checked in caller (and e.g. fault-in + kmap_atomic
codepath also needs might_fault() coverage)
* we have already done object size checks
* we have *NOT* done access_ok() recently enough; we rely upon the
iovec array having passed sanity checks back when it had been created
and not nothing having buggered it since.  However, that's very much
non-local, so we'd better recheck that.

So the thing we want does not match anything in uaccess - we need
access_ok + kasan checks + raw copy without any zeroing.  Just define
such helpers and use them here.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-07 05:18:09 -04:00
Linus Torvalds
dc502142b6 Merge branch 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull user access str* updates from Al Viro:
 "uaccess str...() dead code removal"

* 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  s390 keyboard.c: don't open-code strndup_user()
  mips: get rid of unused __strnlen_user()
  get rid of unused __strncpy_from_user() instances
  kill strlen_user()
2017-07-06 22:07:44 -07:00
Linus Torvalds
f72e24a124 This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
 code related to dma-mapping, and will further consolidate arch code
 into common helpers.
 
 This pull request contains:
 
  - removal of the DMA_ERROR_CODE macro, replacing it with calls
    to ->mapping_error so that the dma_map_ops instances are
    more self contained and can be shared across architectures (me)
  - removal of the ->set_dma_mask method, which duplicates the
    ->dma_capable one in terms of functionality, but requires more
    duplicate code.
  - various updates for the coherent dma pool and related arm code
    (Vladimir)
  - various smaller cleanups (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlldmw0LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOiKA/+Ln1mFLSf3nfTzIHa24Bbk8ZTGr0B8TD4Vmyyt8iG
 oO3AeaTLn3d6ugbH/uih/tPz8PuyXsdiTC1rI/ejDMiwMTSjW6phSiIHGcStSR9X
 VFNhmMFacp7QpUpvxceV0XZYKDViAoQgHeGdp3l+K5h/v4AYePV/v/5RjQPaEyOh
 YLbCzETO+24mRWdJxdAqtTW4ovYhzj6XsiJ+pAjlV0+SWU6m5L5E+VAPNi1vqv1H
 1O2KeCFvVYEpcnfL3qnkw2timcjmfCfeFAd9mCUAc8mSRBfs3QgDTKw3XdHdtRml
 LU2WuA5cpMrOdBO4mVra2plo8E2szvpB1OZZXoKKdCpK3VGwVpVHcTvClK2Ks/3B
 GDLieroEQNu2ZIUIdWXf/g2x6le3BcC9MmpkAhnGPqCZ7skaIBO5Cjpxm0zTJAPl
 PPY3CMBBEktAvys6DcudOYGixNjKUuAm5lnfpcfTEklFdG0AjhdK/jZOplAFA6w4
 LCiy0rGHM8ZbVAaFxbYoFCqgcjnv6EjSiqkJxVI4fu/Q7v9YXfdPnEmE0PJwCVo5
 +i7aCLgrYshTdHr/F3e5EuofHN3TDHwXNJKGh/x97t+6tt326QMvDKX059Kxst7R
 rFukGbrYvG8Y7yXwrSDbusl443ta0Ht7T1oL4YUoJTZp0nScAyEluDTmrH1JVCsT
 R4o=
 =0Fso
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping infrastructure from Christoph Hellwig:
 "This is the first pull request for the new dma-mapping subsystem

  In this new subsystem we'll try to properly maintain all the generic
  code related to dma-mapping, and will further consolidate arch code
  into common helpers.

  This pull request contains:

   - removal of the DMA_ERROR_CODE macro, replacing it with calls to
     ->mapping_error so that the dma_map_ops instances are more self
     contained and can be shared across architectures (me)

   - removal of the ->set_dma_mask method, which duplicates the
     ->dma_capable one in terms of functionality, but requires more
     duplicate code.

   - various updates for the coherent dma pool and related arm code
     (Vladimir)

   - various smaller cleanups (me)"

* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
  ARM: dma-mapping: Remove traces of NOMMU code
  ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
  ARM: NOMMU: Introduce dma operations for noMMU
  drivers: dma-mapping: allow dma_common_mmap() for NOMMU
  drivers: dma-coherent: Introduce default DMA pool
  drivers: dma-coherent: Account dma_pfn_offset when used with device tree
  dma: Take into account dma_pfn_offset
  dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
  dma-mapping: remove dmam_free_noncoherent
  crypto: qat - avoid an uninitialized variable warning
  au1100fb: remove a bogus dma_free_nonconsistent call
  MAINTAINERS: add entry for dma mapping helpers
  powerpc: merge __dma_set_mask into dma_set_mask
  dma-mapping: remove the set_dma_mask method
  powerpc/cell: use the dma_supported method for ops switching
  powerpc/cell: clean up fixed mapping dma_ops initialization
  tile: remove dma_supported and mapping_error methods
  xen-swiotlb: remove xen_swiotlb_set_dma_mask
  arm: implement ->dma_supported instead of ->set_dma_mask
  mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
  ...
2017-07-06 19:20:54 -07:00
Linus Torvalds
a4c20b9a57 Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "These are the percpu changes for the v4.13-rc1 merge window. There are
  a couple visibility related changes - tracepoints and allocator stats
  through debugfs, along with __ro_after_init markings and a cosmetic
  rename in percpu_counter.

  Please note that the simple O(#elements_in_the_chunk) area allocator
  used by percpu allocator is again showing scalability issues,
  primarily with bpf allocating and freeing large number of counters.
  Dennis is working on the replacement allocator and the percpu
  allocator will be seeing increased churns in the coming cycles"

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix static checker warnings in pcpu_destroy_chunk
  percpu: fix early calls for spinlock in pcpu_stats
  percpu: resolve err may not be initialized in pcpu_alloc
  percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch
  percpu: add tracepoint support for percpu memory
  percpu: expose statistics about percpu memory via debugfs
  percpu: migrate percpu data structures to internal header
  percpu: add missing lockdep_assert_held to func pcpu_free_area
  mark most percpu globals as __ro_after_init
2017-07-06 08:59:41 -07:00
Jeff Layton
84cbadadc6 lib: add errseq_t type and infrastructure for handling it
An errseq_t is a way of recording errors in one place, and allowing any
number of "subscribers" to tell whether an error has been set again
since a previous time.

It's implemented as an unsigned 32-bit value that is managed with atomic
operations. The low order bits are designated to hold an error code
(max size of MAX_ERRNO). The upper bits are used as a counter.

The API works with consumers sampling an errseq_t value at a particular
point in time. Later, that value can be used to tell whether new errors
have been set since that time.

Note that there is a 1 in 512k risk of collisions here if new errors
are being recorded frequently, since we have so few bits to use as a
counter. To mitigate this, one bit is used as a flag to tell whether the
value has been sampled since a new value was recorded. That allows
us to avoid bumping the counter if no one has sampled it since it
was last bumped.

Later patches will build on this infrastructure to change how writeback
errors are tracked in the kernel.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 07:02:24 -04:00
Linus Torvalds
5518b69b76 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...
2017-07-05 12:31:59 -07:00
Linus Torvalds
eed1fc8779 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:

 - Store printk() messages into the main log buffer directly even in NMI
   when the lock is available. It is the best effort to print even large
   chunk of text. It is handy, for example, when all ftrace messages are
   printed during the system panic in NMI.

 - Add missing annotations to calm down compiler warnings

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: add __printf attributes to internal functions
  printk: Use the main logbuf in NMI when logbuf_lock is available
2017-07-05 11:11:26 -07:00
Linus Torvalds
650fc870a2 There has been a fair amount of activity in the docs tree this time
around.  Highlights include:
 
  - Conversion of a bunch of security documentation into RST
 
  - The conversion of the remaining DocBook templates by The Amazing
    Mauro Machine.  We can now drop the entire DocBook build chain.
 
  - The usual collection of fixes and minor updates.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZWkGAAAoJEI3ONVYwIuV6rf0P/0B3JTiVPKS/WUx53+jzbAi4
 1BN7dmmuMxE1bWpgdEq+ac4aKxm07iAojuntuMj0qz/ZB1WARcmvEqqzI5i4wfq9
 5MrLduLkyuWfr4MOPseKJ2VK83p8nkMOiO7jmnBsilu7fE4nF+5YY9j4cVaArfMy
 cCQvAGjQzvej2eiWMGUSLHn4QFKh00aD7cwKyBVsJ08b27C9xL0J2LQyCDZ4yDgf
 37/MH3puEd3HX/4qAwLonIxT3xrIrrbDturqLU7OSKcWTtGZNrYyTFbwR3RQtqWd
 H8YZVg2Uyhzg9MYhkbQ2E5dEjUP4mkegcp6/JTINH++OOPpTbdTJgirTx7VTkSf1
 +kL8t7+Ayxd0FH3+77GJ5RMj8LUK6rj5cZfU5nClFQKWXP9UL3IelQ3Nl+SpdM8v
 ZAbR2KjKgH9KS6+cbIhgFYlvY+JgPkOVruwbIAc7wXVM3ibk1sWoBOFEujcbueWh
 yDpQv3l1UX0CKr3jnevJoW26LtEbGFtC7gSKZ+3btyeSBpWFGlii42KNycEGwUW0
 ezlwryDVHzyTUiKllNmkdK4v73mvPsZHEjgmme4afKAIiUilmcUF4XcqD86hISFT
 t+UJLA/zEU+0sJe26o2nK6GNJzmo4oCtVyxfhRe26Ojs1n80xlYgnZRfuIYdd31Z
 nwLBnwDCHAOyX91WXp9G
 =cVjZ
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.13' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "There has been a fair amount of activity in the docs tree this time
  around. Highlights include:

   - Conversion of a bunch of security documentation into RST

   - The conversion of the remaining DocBook templates by The Amazing
     Mauro Machine. We can now drop the entire DocBook build chain.

   - The usual collection of fixes and minor updates"

* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
  scripts/kernel-doc: handle DECLARE_HASHTABLE
  Documentation: atomic_ops.txt is core-api/atomic_ops.rst
  Docs: clean up some DocBook loose ends
  Make the main documentation title less Geocities
  Docs: Use kernel-figure in vidioc-g-selection.rst
  Docs: fix table problems in ras.rst
  Docs: Fix breakage with Sphinx 1.5 and upper
  Docs: Include the Latex "ifthen" package
  doc/kokr/howto: Only send regression fixes after -rc1
  docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
  doc: Document suitability of IBM Verse for kernel development
  Doc: fix a markup error in coding-style.rst
  docs: driver-api: i2c: remove some outdated information
  Documentation: DMA API: fix a typo in a function name
  Docs: Insert missing space to separate link from text
  doc/ko_KR/memory-barriers: Update control-dependencies example
  Documentation, kbuild: fix typo "minimun" -> "minimum"
  docs: Fix some formatting issues in request-key.rst
  doc: ReSTify keys-trusted-encrypted.txt
  doc: ReSTify keys-request-key.txt
  ...
2017-07-03 21:13:25 -07:00
Linus Torvalds
f4dd029ee0 Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1.
 
 Lots of stuff in here, a large thunderbolt update, w1 driver header
 reorg, the new mux driver subsystem, google firmware driver updates, and
 a raft of other smaller things.  Full details in the shortlog.
 
 All of these have been in linux-next for a while with the only reported
 issue being a merge problem with this tree and the jc-docs tree in the
 w1 documentation area.  The fix should be obvious for what to do when it
 happens, if not, we can send a follow-up patch for it afterward.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO
 EMi60UXWqAFJbtVMS9Aj
 =yrSq
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the "big" char/misc driver patchset for 4.13-rc1.

  Lots of stuff in here, a large thunderbolt update, w1 driver header
  reorg, the new mux driver subsystem, google firmware driver updates,
  and a raft of other smaller things. Full details in the shortlog.

  All of these have been in linux-next for a while with the only
  reported issue being a merge problem with this tree and the jc-docs
  tree in the w1 documentation area"

* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
  misc: apds990x: Use sysfs_match_string() helper
  mei: drop unreachable code in mei_start
  mei: validate the message header only in first fragment.
  DocBook: w1: Update W1 file locations and names in DocBook
  mux: adg792a: always require I2C support
  nvmem: rockchip-efuse: add support for rk322x-efuse
  nvmem: core: add locking to nvmem_find_cell
  nvmem: core: Call put_device() in nvmem_unregister()
  nvmem: core: fix leaks on registration errors
  nvmem: correct Broadcom OTP controller driver writes
  w1: Add subsystem kernel public interface
  drivers/fsi: Add module license to core driver
  drivers/fsi: Use asynchronous slave mode
  drivers/fsi: Add hub master support
  drivers/fsi: Add SCOM FSI client device driver
  drivers/fsi/gpio: Add tracepoints for GPIO master
  drivers/fsi: Add GPIO based FSI master
  drivers/fsi: Document FSI master sysfs files in ABI
  drivers/fsi: Add error handling for slave
  drivers/fsi: Add tracepoints for low-level operations
  ...
2017-07-03 20:55:59 -07:00
Linus Torvalds
974668417b driver core patches for 4.13-rc1
Here is the big driver core update for 4.13-rc1.
 
 The large majority of this is a lot of cleanup of old fields in the
 driver core structures and their remaining usages in random drivers.
 All of those fixes have been reviewed by the various subsystem
 maintainers.  There's also some small firmware updates in here, a new
 kobject uevent api interface that makes userspace interaction easier,
 and a few other minor things.
 
 All of these have been in linux-next for a long while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpX4A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymobgCfd0d13IfpZoq1N41wc6z2Z0xD7cwAnRMeH1/p
 kEeISGpHPYP9f8PBh9FO
 =Hfqt
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core update for 4.13-rc1.

  The large majority of this is a lot of cleanup of old fields in the
  driver core structures and their remaining usages in random drivers.
  All of those fixes have been reviewed by the various subsystem
  maintainers. There's also some small firmware updates in here, a new
  kobject uevent api interface that makes userspace interaction easier,
  and a few other minor things.

  All of these have been in linux-next for a long while with no reported
  issues"

* tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits)
  arm: mach-rpc: ecard: fix build error
  zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()
  driver-core: remove struct bus_type.dev_attrs
  powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type
  powerpc: vio: use dev_groups and not dev_attrs for bus_type
  USB: usbip: convert to use DRIVER_ATTR_RW
  s390: drivers: convert to use DRIVER_ATTR_RO/WO
  platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW
  pcmcia: ds: convert to use DRIVER_ATTR_RO
  wireless: ipw2x00: convert to use DRIVER_ATTR_RW
  net: ehea: convert to use DRIVER_ATTR_RO
  net: caif: convert to use DRIVER_ATTR_RO
  TTY: hvc: convert to use DRIVER_ATTR_RW
  PCI: pci-driver: convert to use DRIVER_ATTR_WO
  IB: nes: convert to use DRIVER_ATTR_RW
  HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups
  arm: ecard: fix dev_groups patch typo
  tty: serdev: use dev_groups and not dev_attrs for bus_type
  sparc: vio: use dev_groups and not dev_attrs for bus_type
  hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type
  ...
2017-07-03 20:27:48 -07:00
Dan Williams
9d92573fff Merge branch 'for-4.13/dax' into libnvdimm-for-next 2017-07-03 16:54:58 -07:00
Linus Torvalds
9bd42183b9 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Add the SYSTEM_SCHEDULING bootup state to move various scheduler
     debug checks earlier into the bootup. This turns silent and
     sporadically deadly bugs into nice, deterministic splats. Fix some
     of the splats that triggered. (Thomas Gleixner)

   - A round of restructuring and refactoring of the load-balancing and
     topology code (Peter Zijlstra)

   - Another round of consolidating ~20 of incremental scheduler code
     history: this time in terms of wait-queue nomenclature. (I didn't
     get much feedback on these renaming patches, and we can still
     easily change any names I might have misplaced, so if anyone hates
     a new name, please holler and I'll fix it.) (Ingo Molnar)

   - sched/numa improvements, fixes and updates (Rik van Riel)

   - Another round of x86/tsc scheduler clock code improvements, in hope
     of making it more robust (Peter Zijlstra)

   - Improve NOHZ behavior (Frederic Weisbecker)

   - Deadline scheduler improvements and fixes (Luca Abeni, Daniel
     Bristot de Oliveira)

   - Simplify and optimize the topology setup code (Lauro Ramos
     Venancio)

   - Debloat and decouple scheduler code some more (Nicolas Pitre)

   - Simplify code by making better use of llist primitives (Byungchul
     Park)

   - ... plus other fixes and improvements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
  sched/cputime: Refactor the cputime_adjust() code
  sched/debug: Expose the number of RT/DL tasks that can migrate
  sched/numa: Hide numa_wake_affine() from UP build
  sched/fair: Remove effective_load()
  sched/numa: Implement NUMA node level wake_affine()
  sched/fair: Simplify wake_affine() for the single socket case
  sched/numa: Override part of migrate_degrades_locality() when idle balancing
  sched/rt: Move RT related code from sched/core.c to sched/rt.c
  sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
  sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
  sched/fair: Spare idle load balancing on nohz_full CPUs
  nohz: Move idle balancer registration to the idle path
  sched/loadavg: Generalize "_idle" naming to "_nohz"
  sched/core: Drop the unused try_get_task_struct() helper function
  sched/fair: WARN() and refuse to set buddy when !se->on_rq
  sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
  sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
  sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
  sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
  sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
  ...
2017-07-03 13:08:04 -07:00
Linus Torvalds
892ad5acca Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Add CONFIG_REFCOUNT_FULL=y to allow the disabling of the 'full'
     (robustness checked) refcount_t implementation with slightly lower
     runtime overhead. (Kees Cook)

     The lighter weight variant is the default. The two variants use the
     same API. Having this variant was a precondition by some
     maintainers to merge refcount_t cleanups.

   - Add lockdep support for rtmutexes (Peter Zijlstra)

   - liblockdep fixes and improvements (Sasha Levin, Ben Hutchings)

   - ... misc fixes and improvements"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  locking/refcount: Remove the half-implemented refcount_sub() API
  locking/refcount: Create unchecked atomic_t implementation
  locking/rtmutex: Don't initialize lockdep when not required
  locking/selftest: Add RT-mutex support
  locking/selftest: Remove the bad unlock ordering test
  rt_mutex: Add lockdep annotations
  MAINTAINERS: Claim atomic*_t maintainership
  locking/x86: Remove the unused atomic_inc_short() methd
  tools/lib/lockdep: Remove private kernel headers
  tools/lib/lockdep: Hide liblockdep output from test results
  tools/lib/lockdep: Add dummy current_gfp_context()
  tools/include: Add IS_ERR_OR_NULL to err.h
  tools/lib/lockdep: Add empty __is_[module,kernel]_percpu_address
  tools/lib/lockdep: Include err.h
  tools/include: Add (mostly) empty include/linux/sched/mm.h
  tools/lib/lockdep: Use LDFLAGS
  tools/lib/lockdep: Remove double-quotes from soname
  tools/lib/lockdep: Fix object file paths used in an out-of-tree build
  tools/lib/lockdep: Fix compilation for 4.11
  tools/lib/lockdep: Don't mix fd-based and stream IO
  ...
2017-07-03 12:14:18 -07:00
Linus Torvalds
330e9e4625 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The sole purpose of these changes is to shrink and simplify the RCU
  code base, which has suffered from creeping bloat over the past couple
  of years. The end result is a net removal of ~2700 lines of code:

     79 files changed, 1496 insertions(+), 4211 deletions(-)

  Plus there's a marked reduction in the Kconfig space complexity as
  well, here's the number of matches on 'grep RCU' in the .config:

                               before       after

     x86-defconfig                 17          15
     x86-allmodconfig              33          20"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
  rcu: Remove RCU CPU stall warnings from Tiny RCU
  rcu: Remove event tracing from Tiny RCU
  rcu: Move RCU debug Kconfig options to kernel/rcu
  rcu: Move RCU non-debug Kconfig options to kernel/rcu
  rcu: Eliminate NOCBs CPU-state Kconfig options
  rcu: Remove debugfs tracing
  srcu: Remove Classic SRCU
  srcu: Fix rcutorture-statistics typo
  rcu: Remove SPARSE_RCU_POINTER Kconfig option
  rcu: Remove the now-obsolete PROVE_RCU_REPEATEDLY Kconfig option
  rcu: Remove typecheck() from RCU locking wrapper functions
  rcu: Remove #ifdef moving rcu_end_inkernel_boot from rcupdate.h
  rcu: Remove nohz_full full-system-idle state machine
  rcu: Remove the RCU_KTHREAD_PRIO Kconfig option
  rcu: Remove *_SLOW_* Kconfig options
  srcu: Use rnp->lock wrappers to replace explicit memory barriers
  rcu: Move rnp->lock wrappers for SRCU use
  rcu: Convert rnp->lock wrappers to macros for SRCU use
  rcu: Refactor #includes from include/linux/rcupdate.h
  bcm47xx: Fix build regression
  ...
2017-07-03 11:34:53 -07:00
Linus Torvalds
c6b1e36c8f Merge branch 'for-4.13/block' of git://git.kernel.dk/linux-block
Pull core block/IO updates from Jens Axboe:
 "This is the main pull request for the block layer for 4.13. Not a huge
  round in terms of features, but there's a lot of churn related to some
  core cleanups.

  Note this depends on the UUID tree pull request, that Christoph
  already sent out.

  This pull request contains:

   - A series from Christoph, unifying the error/stats codes in the
     block layer. We now use blk_status_t everywhere, instead of using
     different schemes for different places.

   - Also from Christoph, some cleanups around request allocation and IO
     scheduler interactions in blk-mq.

   - And yet another series from Christoph, cleaning up how we handle
     and do bounce buffering in the block layer.

   - A blk-mq debugfs series from Bart, further improving on the support
     we have for exporting internal information to aid debugging IO
     hangs or stalls.

   - Also from Bart, a series that cleans up the request initialization
     differences across types of devices.

   - A series from Goldwyn Rodrigues, allowing the block layer to return
     failure if we will block and the user asked for non-blocking.

   - Patch from Hannes for supporting setting loop devices block size to
     that of the underlying device.

   - Two series of patches from Javier, fixing various issues with
     lightnvm, particular around pblk.

   - A series from me, adding support for write hints. This comes with
     NVMe support as well, so applications can help guide data placement
     on flash to improve performance, latencies, and write
     amplification.

   - A series from Ming, improving and hardening blk-mq support for
     stopping/starting and quiescing hardware queues.

   - Two pull requests for NVMe updates. Nothing major on the feature
     side, but lots of cleanups and bug fixes. From the usual crew.

   - A series from Neil Brown, greatly improving the bio rescue set
     support. Most notably, this kills the bio rescue work queues, if we
     don't really need them.

   - Lots of other little bug fixes that are all over the place"

* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
  lightnvm: pblk: set line bitmap check under debug
  lightnvm: pblk: verify that cache read is still valid
  lightnvm: pblk: add initialization check
  lightnvm: pblk: remove target using async. I/Os
  lightnvm: pblk: use vmalloc for GC data buffer
  lightnvm: pblk: use right metadata buffer for recovery
  lightnvm: pblk: schedule if data is not ready
  lightnvm: pblk: remove unused return variable
  lightnvm: pblk: fix double-free on pblk init
  lightnvm: pblk: fix bad le64 assignations
  nvme: Makefile: remove dead build rule
  blk-mq: map all HWQ also in hyperthreaded system
  nvmet-rdma: register ib_client to not deadlock in device removal
  nvme_fc: fix error recovery on link down.
  nvmet_fc: fix crashes on bad opcodes
  nvme_fc: Fix crash when nvme controller connection fails.
  nvme_fc: replace ioabort msleep loop with completion
  nvme_fc: fix double calls to nvme_cleanup_cmd()
  nvme-fabrics: verify that a controller returns the correct NQN
  nvme: simplify nvme_dev_attrs_are_visible
  ...
2017-07-03 10:34:51 -07:00
Linus Torvalds
81e3e04489 UUID/GUID updates:
- introduce the new uuid_t/guid_t types that are going to replace
    the somewhat confusing uuid_be/uuid_le types and make the terminology
    fit the various specs, as well as the userspace libuuid library.
    (me, based on a previous version from Amir)
  - consolidated generic uuid/guid helper functions lifted from XFS
    and libnvdimm (Amir and me)
  - conversions to the new types and helpers (Amir, Andy and me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAllZfmILHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMvyg/9EvWHOOsSdeDykCK3KdH2uIqnxwpl+m7ljccaGJIc
 MmaH0KnsP9p/Cuw5hESh2tYlmCYN7pmYziNXpf/LRS65/HpEYbs4oMqo8UQsN0UM
 2IXHfXY0HnCoG5OixH8RNbFTkxuGphsTY8meaiDr6aAmqChDQI2yGgQLo3WM2/Qe
 R9N1KoBWH/bqY6dHv+urlFwtsREm2fBH+8ovVma3TO73uZCzJGLJBWy3anmZN+08
 uYfdbLSyRN0T8rqemVdzsZ2SrpHYkIsYGUZV43F581vp8e/3OKMoMxpWRRd9fEsa
 MXmoaHcLJoBsyVSFR9lcx3axKrhAgBPZljASbbA0h49JneWXrzghnKBQZG2SnEdA
 ktHQ2sE4Yb5TZSvvWEKMQa3kXhEfIbTwgvbHpcDr5BUZX8WvEw2Zq8e7+Mi4+KJw
 QkvFC1S96tRYO2bxdJX638uSesGUhSidb+hJ/edaOCB/GK+sLhUdDTJgwDpUGmyA
 xVXTF51ramRS2vhlbzN79x9g33igIoNnG4/PV0FPvpCTSqxkHmPc5mK6Vals1lqt
 cW6XfUjSQECq5nmTBtYDTbA/T+8HhBgSQnrrvmferjJzZUFGr/7MXl+Evz2x4CjX
 OBQoAMu241w6Vp3zoXqxzv+muZ/NLar52M/zbi9TUjE0GvvRNkHvgCC4NmpIlWYJ
 Sxg=
 =J/4P
 -----END PGP SIGNATURE-----

Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid

Pull uuid subsystem from Christoph Hellwig:
 "This is the new uuid subsystem, in which Amir, Andy and I have started
  consolidating our uuid/guid helpers and improving the types used for
  them. Note that various other subsystems have pulled in this tree, so
  I'd like it to go in early.

  UUID/GUID summary:

   - introduce the new uuid_t/guid_t types that are going to replace the
     somewhat confusing uuid_be/uuid_le types and make the terminology
     fit the various specs, as well as the userspace libuuid library.
     (me, based on a previous version from Amir)

   - consolidated generic uuid/guid helper functions lifted from XFS and
     libnvdimm (Amir and me)

   - conversions to the new types and helpers (Amir, Andy and me)"

* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
  ACPI: hns_dsaf_acpi_dsm_guid can be static
  mmc: sdhci-pci: make guid intel_dsm_guid static
  uuid: Take const on input of uuid_is_null() and guid_is_null()
  thermal: int340x_thermal: fix compile after the UUID API switch
  thermal: int340x_thermal: Switch to use new generic UUID API
  acpi: always include uuid.h
  ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
  ACPI / extlog: Switch to use new generic UUID API
  ACPI / bus: Switch to use new generic UUID API
  ACPI / APEI: Switch to use new generic UUID API
  acpi, nfit: Switch to use new generic UUID API
  MAINTAINERS: add uuid entry
  tmpfs: generate random sb->s_uuid
  scsi_debug: switch to uuid_t
  nvme: switch to uuid_t
  sysctl: switch to use uuid_t
  partitions/ldm: switch to use uuid_t
  overlayfs: use uuid_t instead of uuid_be
  fs: switch ->s_uuid to uuid_t
  ima/policy: switch to use uuid_t
  ...
2017-07-03 09:55:26 -07:00
Petr Mladek
a5707eef79 Merge branch 'for-4.13' into for-linus 2017-07-03 15:33:39 +02:00
David S. Miller
b079115937 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
A set of overlapping changes in macvlan and the rocker
driver, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 12:43:08 -04:00
Al Viro
72e809ed81 iov_iter: sanity checks for copy to/from page primitives
for now - just that we don't attempt to cross out of compound page

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29 22:21:23 -04:00
Al Viro
aa28de275a iov_iter/hardening: move object size checks to inlined part
There we actually have useful information about object sizes.
Note: this patch has them done for all iov_iter flavours.
Right now we do them twice in iovec case, but that'll change
very shortly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29 22:21:22 -04:00
Al Viro
9c5f6908de copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29 22:21:20 -04:00
Kees Cook
fd25d19f6b locking/refcount: Create unchecked atomic_t implementation
Many subsystems will not use refcount_t unless there is a way to build the
kernel so that there is no regression in speed compared to atomic_t. This
adds CONFIG_REFCOUNT_FULL to enable the full refcount_t implementation
which has the validation but is slightly slower. When not enabled,
refcount_t uses the basic unchecked atomic_t routines, which results in
no code changes compared to just using atomic_t directly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Jann Horn <jannh@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arozansk@redhat.com
Cc: axboe@kernel.dk
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170621200026.GA115679@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-28 18:54:46 +02:00
Vladimir Murzin
25f1e18870 dma: Take into account dma_pfn_offset
Even though dma-noop-ops assumes 1:1 memory mapping DMA memory range
can be different to RAM. For example, ARM STM32F4 MCU offers the
possibility to remap SDRAM from 0xc000_0000 to 0x0 to get CPU
performance boost, but DMA continue to see SDRAM at 0xc000_0000. This
difference in mapping is handled via device-tree "dma-range" property
which leads to dev->dma_pfn_offset is set nonzero. To handle such
cases take dma_pfn_offset into account.

Cc: Joerg Roedel <jroedel@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-28 06:55:01 -07:00
Christoph Hellwig
3be6d9b6da dma-virt: remove dma_supported and mapping_error methods
These just duplicate the default behavior if no method is provided.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-28 06:54:41 -07:00
Christoph Hellwig
050d228a74 dma-noop: remove dma_supported and mapping_error methods
These just duplicate the default behavior if no method is provided.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-28 06:54:40 -07:00
Pantelis Antoniou
ce4fecf1fe vsprintf: Add %p extension "%pOF" for device tree
90% of the usage of device node's full_name is printing it out in a
kernel message. However, storing the full path for every node is
wasteful and redundant. With a custom format specifier, we can generate
the full path at run-time and eventually remove the full path from every
node.

For instance typical use is:
	pr_info("Frobbing node %s\n", node->full_name);

Which can be written now as:
	pr_info("Frobbing node %pOF\n", node);

'%pO' is the base specifier to represent kobjects with '%pOF'
representing struct device_node. Currently, struct device_node is the
only supported type of kobject.

More fine-grained control of formatting includes printing the name,
flags, path-spec name and others, explained in the documentation entry.

Originally written by Pantelis, but pretty much rewrote the core
function using existing string/number functions. The 2 passes were
unnecessary and have been removed. Also, updated the checkpatch.pl
check. The unittest code was written by Grant Likely.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-27 12:36:40 -05:00
Ingo Molnar
1bc3cd4dfa Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-24 08:57:20 +02:00
Ilya Matveychikov
a91e0f680b lib/cmdline.c: fix get_options() overflow while parsing ranges
When using get_options() it's possible to specify a range of numbers,
like 1-100500.  The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.

Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23 16:15:55 -07:00