This patch adds a selftest for the SafeSetID LSM. The test requires
mounting securityfs if it isn't mounted, creating test users in
/etc/passwd, and configuring policies for the SafeSetID LSM through
writes to securityfs.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Pull networking fixes from David Miller:
1) Fix endless loop in nf_tables, from Phil Sutter.
2) Fix cross namespace ip6_gre tunnel hash list corruption, from
Olivier Matz.
3) Don't be too strict in phy_start_aneg() otherwise we might not allow
restarting auto negotiation. From Heiner Kallweit.
4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue.
5) Memory leak in act_tunnel_key, from Davide Caratti.
6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn.
7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet.
8) Missing udplite rehash callbacks, from Alexey Kodanev.
9) Log dirty pages properly in vhost, from Jason Wang.
10) Use consume_skb() in neigh_probe() as this is a normal free not a
drop, from Yang Wei. Likewise in macvlan_process_broadcast().
11) Missing device_del() in mdiobus_register() error paths, from Thomas
Petazzoni.
12) Fix checksum handling of short packets in mlx5, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits)
bpf: in __bpf_redirect_no_mac pull mac only if present
virtio_net: bulk free tx skbs
net: phy: phy driver features are mandatory
isdn: avm: Fix string plus integer warning from Clang
net/mlx5e: Fix cb_ident duplicate in indirect block register
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
net/mlx5e: Fix wrong error code return on FEC query failure
net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
tools: bpftool: Cleanup license mess
bpf: fix inner map masking to prevent oob under speculation
bpf: pull in pkt_sched.h header for tooling to fix bpftool build
selftests: forwarding: Add a test case for externally learned FDB entries
selftests: mlxsw: Test FDB offload indication
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
net: bridge: Mark FDB entries that were added by user as such
mlxsw: spectrum_fid: Update dummy FID index
mlxsw: pci: Return error on PCI reset timeout
mlxsw: pci: Increase PCI SW reset timeout
mlxsw: pci: Ring CQ's doorbell before RDQ's
MAINTAINERS: update email addresses of liquidio driver maintainers
...
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-20
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem.
2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter.
3) Fix map in map masking to prevent out-of-bounds access under
speculative execution, from Daniel.
4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal
pacing, from Yuchung.
5) Fix json writer license in bpftool, from Thomas.
6) Fix AF_XDP to check if an actually queue exists during umem
setup, from Krzysztof.
7) Several fixes to BPF stackmap's build id handling. Another fix
for bpftool build to account for libbfd variations wrt linking
requirements, from Stanislav.
8) Fix BPF samples build with clang by working around missing asm
goto, from Yonghong.
9) Fix libbpf to retry program load on signal interrupt, from Lorenz.
10) Various minor compile warning fixes in BPF code, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Precise and non-ambiguous license information is important. The recent
relicensing of the bpftools introduced a license conflict.
The files have now:
SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause
and
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version
Amazingly about 20 people acked that change and neither they nor the
committer noticed. Oh well.
Digging deeper: The files were imported from the iproute2 repository with
the GPL V2 or later boiler plate text in commit b66e907cfe ("tools:
bpftool: copy JSON writer from iproute2 repository")
Looking at the iproute2 repository at
git://git.kernel.org/pub/scm/network/iproute2/iproute2.git
the following commit is the equivivalent:
commit d9d8c839 ("json_writer: add SPDX Identifier (GPL-2/BSD-2)")
That commit explicitly removes the boiler plate and relicenses the code
uner GPL-2.0-only and BSD-2-Clause. As Steven wrote the original code and
also the relicensing commit, it's assumed that the relicensing was intended
to do exaclty that. Just the kernel side update failed to remove the boiler
plate. Do so now.
Fixes: 907b223651 ("tools: bpftool: dual license all files")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Sean Young <sean@mess.org>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: David Calavera <david.calavera@gmail.com>
Cc: Andrey Ignatov <rdna@fb.com>
Cc: Joe Stringer <joe@wand.net.nz>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Petar Penkov <ppenkov@stanford.edu>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
CC: okash.khawaja@gmail.com
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dan reported that bpftool does not compile for him:
$ make tools/bpf
DESCEND bpf
Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
DESCEND bpftool
Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
CC /opt/linux.git/tools/bpf/bpftool/net.o
In file included from /opt/linux.git/tools/include/uapi/linux/pkt_cls.h:6:0,
from /opt/linux.git/tools/include/uapi/linux/tc_act/tc_bpf.h:14,
from net.c:13:
net.c: In function 'show_dev_tc_bpf':
net.c:164:21: error: 'TC_H_CLSACT' undeclared (first use in this function)
handle = TC_H_MAKE(TC_H_CLSACT, TC_H_MIN_INGRESS);
[...]
Fix it by importing pkt_sched.h header copy into tooling
infrastructure.
Fixes: 49a249c387 ("tools/bpftool: copy a few net uapi headers to tools directory")
Fixes: f6f3bac08f ("tools/bpf: bpftool: add net support")
Reported-by: Dan Gilson <dan_gilson@yahoo.com>
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=202315
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that externally learned FDB entries can roam, but not age out.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that externally learned FDB entries added from user space are
marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI adapters.
And a fix for probable memory corruption in some of the new NPU code, caught by
smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent during the
merge window but I accidentally only merged the first of two patches in the
series. It's been in linux-next so hopefully doesn't conflict with anything in
acme's tree.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter,
Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Madhavan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=hlZ7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
While running test_progs in a loop I found out that I'm sometimes hitting
"Didn't find expected build ID from the map" error.
Looking at stack_map_get_build_id_offset() it seems that it is racy (by
design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock
current->mm->mmap_sem).
Let's retry this test a single time.
Fixes: 13790d1cc7 ("bpf: add selftest for stackmap with build_id in NMI context")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
specifier for the ife type changed from 0x%X to %#llX, causing systematic
failures in the following TDC test cases:
7682 - Create valid ife encode action with mark and pass control
ef47 - Create valid ife encode action with mark and pipe control
df43 - Create valid ife encode action with mark and continue control
e4cf - Create valid ife encode action with mark and drop control
ccba - Create valid ife encode action with mark and reclassify control
a1cf - Create valid ife encode action with mark and jump control
cb3d - Create valid ife encode action with mark value at 32-bit maximum
95ed - Create valid ife encode action with prio and pass control
aa17 - Create valid ife encode action with prio and pipe control
74c7 - Create valid ife encode action with prio and continue control
7a97 - Create valid ife encode action with prio and drop control
f66b - Create valid ife encode action with prio and reclassify control
3056 - Create valid ife encode action with prio and jump control
7dd3 - Create valid ife encode action with prio value at 32-bit maximum
05bb - Create valid ife encode action with tcindex and pass control
ce65 - Create valid ife encode action with tcindex and pipe control
09cd - Create valid ife encode action with tcindex and continue control
8eb5 - Create valid ife encode action with tcindex and continue control
451a - Create valid ife encode action with tcindex and drop control
d76c - Create valid ife encode action with tcindex and reclassify control
e731 - Create valid ife encode action with tcindex and jump control
b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
2a9c - Create valid ife encode action with mac src parameter
cf5c - Create valid ife encode action with mac dst parameter
2353 - Create valid ife encode action with mac src and mac dst parameters
552c - Create valid ife encode action with mark and type parameters
0421 - Create valid ife encode action with prio and type parameters
4017 - Create valid ife encode action with tcindex and type parameters
fac3 - Create valid ife encode action with index at 32-bit maximnum
7c25 - Create valid ife decode action with pass control
dccb - Create valid ife decode action with pipe control
7bb9 - Create valid ife decode action with continue control
d9ad - Create valid ife decode action with drop control
219f - Create valid ife decode action with reclassify control
8f44 - Create valid ife decode action with jump control
b330 - Create ife encode action with cookie
Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 1c25324caf ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:
7a88 - Add tunnel_key action with cookie parameter
Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After merge of commit 80ef0f22ce ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:
ba4e - Add tunnel_key set action with missing mandatory id parameter
because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some platforms, in order to link against libbfd, we need to
link against liberty and even possibly libz. Account for that
in the bpftool Makefile. We now have proper feature detection
for each case, so handle each one separately.
See recent commit 14541b1e7e ("perf build: Don't unconditionally link the
libbfd feature test to -liberty and -lz") where I fixed feature
detection.
v2 (addressed Jakub's nits):
* better syntax for 'else ifeq'
* no space between ifeq args
v3:
* use LIBS, not EXTLIBS for -DHAVE_LIBBFD_SUPPORT
Fixes: 29a9c10e41 ("bpftool: make libbfd optional")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This should be == instead of =.
Fixes: b52354aa06 ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c3494801cd ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.
Fixes: c3494801cd ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh
However, we install only with_addr.sh.
Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets
installed as well.
Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x
Fixes: ef4ab8447a ("selftests: bpf: install script with_addr.sh")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
Gautier.
2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.
3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
Brivio.
4) Use after free in hns driver, from Yonglong Liu.
5) icmp6_send() needs to handle the case of NULL skb, from Eric
Dumazet.
6) Missing rcu read lock in __inet6_bind() when operating on mapped
addresses, from David Ahern.
7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.
8) Fix PHY vs r8169 module loading ordering issues, from Heiner
Kallweit.
9) Fix bridge vlan memory leak, from Ido Schimmel.
10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.
11) Infoleak in ipv6_local_error(), flow label isn't completely
initialized. From Eric Dumazet.
12) Handle mv88e6390 errata, from Andrew Lunn.
13) Making vhost/vsock CID hashing consistent, from Zha Bin.
14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.
15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
bnxt_en: Fix context memory allocation.
bnxt_en: Fix ring checking logic on 57500 chips.
mISDN: hfcsusb: Use struct_size() in kzalloc()
net: clear skb->tstamp in bridge forwarding path
net: bpfilter: disallow to remove bpfilter module while being used
net: bpfilter: restart bpfilter_umh when error occurred
net: bpfilter: use cleanup callback to release umh_info
umh: add exit routine for UMH process
isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
vhost/vsock: fix vhost vsock cid hashing inconsistent
net: stmmac: Prevent RX starvation in stmmac_napi_poll()
net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
net: stmmac: Check if CBS is supported before configuring
net: stmmac: dwxgmac2: Only clear interrupts that are active
net: stmmac: Fix PCI module removal leak
tools/bpf: fix bpftool map dump with bitfields
tools/bpf: test btf bitfield with >=256 struct member offset
bpf: fix bpffs bitfield pretty print
net: ethernet: mediatek: fix warning in phy_start_aneg
tcp: change txhash on SYN-data timeout
...
Pull perf tooling updates from Ingo Molnar:
"Tooling changes only: fixes and a few stray improvements.
Most of the diffstat is dominated by a PowerPC related fix of system
call trace output beautification that allows us to (again) use the
UAPI header version and sync up with the kernel's version of PowerPC
system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
header"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
tools headers powerpc: Remove unistd.h
perf powerpc: Rework syscall table generation
perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
tools include uapi: Sync linux/if_link.h copy with the kernel sources
tools include uapi: Sync linux/vhost.h with the kernel sources
tools include uapi: Sync linux/fs.h copy with the kernel sources
perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
tools include uapi: Grab a copy of linux/mount.h
perf top: Lift restriction on using callchains without "sym" in --sort
tools lib traceevent: Remove tep_data_event_from_type() API
tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
tools lib traceevent: Changed return logic of tep_register_event_handler() API
tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
tools lib traceevent: Rename struct cmdline to struct tep_cmdline
tools lib traceevent: Initialize host_bigendian at tep_handle allocation
tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
perf tests: Add a test for the ARM 32-bit [vectors] page
perf tools: Make find_vdso_map() more modular
perf trace: Fix alignment for [continued] lines
perf trace: Fix ')' placement in "interrupted" syscall lines
...
Commit 8772c8bc09 ("tools: bpftool: support pretty print
with kind_flag set") added bpftool map dump with kind_flag
support. When bitfield_size can be retrieved directly from
btf_member, function btf_dumper_bitfield() is called to
dump the bitfield. The implementation passed the
wrong parameter "bit_offset" to the function. The excepted
value is the bit_offset within a byte while the passed-in
value is the struct member offset.
This commit fixed the bug with passing correct "bit_offset"
with adjusted data pointer.
Fixes: 8772c8bc09 ("tools: bpftool: support pretty print with kind_flag set")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch modified test_btf pretty print test to cover
the bitfield with struct member equal to or greater 256.
Without the previous kernel patch fix, the modified test will fail:
$ test_btf -p
......
BTF pretty print array(#1)......unexpected pprint output
expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1}
read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0}
BTF pretty print array(#2)......unexpected pprint output
expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1}
read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0}
PASS:6 SKIP:0 FAIL:2
With the kernel fix, the modified test will succeed:
$ test_btf -p
......
BTF pretty print array(#1)......OK
BTF pretty print array(#2)......OK
PASS:8 SKIP:0 FAIL:0
Fixes: 9d5f9f701b ("bpf: btf: fix struct/union/fwd types with kind_flag")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This tag contains a handful of updates that slipped through the cracks
during the merge window due to the holidays. The fixes are mostly
independent, with the exception of one larger audit-related branch.
There's more information about the audit branch in that merge, the rest
are:
* The BSS has been moved, which shrinks flat images.
* A fix to test-bpf so it compiles on RV64I-based systems.
* A fix to respect the kernel commandline when there is no device tree.
* A fix to prevent CPUs from trying to put themselves to sleep when
bringing down the system.
* Support for MODULE_SECTIONS on RV32I-based systems.
* [new in v2] The addition of an SBI earlycon driver. This is
definately a new feature, but I'd like to include it now because I
dropped this patch when submitting the merge window PR that removed our
EARLY_PRINTK support.
As usual, I've tested this by booting a Fedora-based image on a recent
QEMU (this time just whatever I had lying around).
-----BEGIN PGP SIGNATURE-----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=WPnn
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This tag contains a handful of updates that slipped through the cracks
during the merge window due to the holidays. The fixes are mostly
independent, with the exception of one larger audit-related branch.
Core RISC-V updates:
- The BSS has been moved, which shrinks flat images.
- A fix to test-bpf so it compiles on RV64I-based systems.
- A fix to respect the kernel commandline when there is no device
tree.
- A fix to prevent CPUs from trying to put themselves to sleep when
bringing down the system.
- Support for MODULE_SECTIONS on RV32I-based systems.
- [new in v2] The addition of an SBI earlycon driver. This is
definately a new feature, but I'd like to include it now because I
dropped this patch when submitting the merge window PR that removed
our EARLY_PRINTK support.
RISC-V audit updates:
- The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
- The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit}
get defined.
- A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS
As usual, I've tested this by booting a Fedora-based image on a recent
QEMU (this time just whatever I had lying around).
* tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
tty/serial: Add RISC-V SBI earlycon support
riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig
riscv: fix trace_sys_exit hook
riscv: define CREATE_TRACE_POINTS in ptrace.c
riscv: define NR_syscalls in unistd.h
riscv: audit: add audit hook in do_syscall_trace_enter/exit()
riscv: add audit support
RISC-V: Support MODULE_SECTIONS mechanism on RV32
MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer
MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree
riscv: don't stop itself in smp_send_stop
arch: riscv: support kernel command line forcing when no DTB passed
tools uapi: fix RISC-V 64-bit support
RISC-V: Make BSS section as the last section in vmlinux.lds.S
When test_tcpbpf_user runs it complains that it can't find files
tcp_server.py and tcp_client.py.
Rework so that tcp_server.py and tcp_client.py gets installed, added them
to the variable TEST_PROGS_EXTENDED.
Fixes: d6d4f60c3a ("bpf: add selftest for tcpbpf")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We build test_libbpf with CXX to make sure linking against C++ works.
$ make -s -C tools/lib/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
$ make -s -C tools/testing/selftests/bpf
$ git status -sb
? tools/lib/bpf/test_libbpf
? tools/testing/selftests/bpf/test_libbpf
Fixes: 8c4905b995 ("libbpf: make sure bpf headers are c++ include-able")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We use syscall.tbl to generate system call table on powerpc.
The unistd.h copy is no longer required now. Remove it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20190110094936.3132-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I
noticed that 'arch_cpu_idle' dominated, add it to the list of idle
symbols, so that we can see what is that being done when not idle.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4q2b5g4p2hrstrhp9t2mrlho@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
a428afe82f ("net: bridge: add support for user-controlled bool options")
a025fb5f49 ("geneve: Allow configuration of DF behaviour")
b4d3069783 ("vxlan: Allow configuration of DF behaviour")
Silencing this tools/ build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Link: https://lkml.kernel.org/n/tip-wq410s2wuqv5k980bidw0ju8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The example in comment does not useable because the output binary is
named "page_owner_sort", not "sort".
Also add a reference to Documentation/vm/page_owner.rst
Link: http://lkml.kernel.org/r/1546515361-8317-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running the test on the Spectrum ASIC the generated packets are
counted on the ingress filter and injected back to the pipeline because
of the 'pass' action. The router block then drops the packets due to
checksum error, as the test generates packets with zero checksum.
When running the test on an emulator that is not as strict about
checksum errors the test fails since packets are counted twice. Once by
the emulated ASIC on its ingress filter and again by the kernel as the
emulator does not perform checksum validation and allows the packets to
be trapped by a matching host route.
Fix this by changing the action to 'drop', which will prevent the packet
from continuing further in the pipeline to the router block.
For veth pairs this change is essentially a NOP given packets are only
processed once (by the kernel).
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case for the issue fixed by previous commit. In case the
offloading of an unsupported VxLAN tunnel was triggered by adding the
mapped VLAN to a local port, then error should be returned to the user.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To get the changes in:
4b86713236 ("vhost: split structs into a separate header file")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Those didn't touch things used in tools, i.e. the following continues
working:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh
static const char *vhost_virtio_ioctl_cmds[] = {
[0x00] = "SET_FEATURES",
[0x01] = "SET_OWNER",
[0x02] = "RESET_OWNER",
[0x03] = "SET_MEM_TABLE",
[0x04] = "SET_LOG_BASE",
[0x07] = "SET_LOG_FD",
[0x10] = "SET_VRING_NUM",
[0x11] = "SET_VRING_ADDR",
[0x12] = "SET_VRING_BASE",
[0x13] = "SET_VRING_ENDIAN",
[0x14] = "GET_VRING_ENDIAN",
[0x20] = "SET_VRING_KICK",
[0x21] = "SET_VRING_CALL",
[0x22] = "SET_VRING_ERR",
[0x23] = "SET_VRING_BUSYLOOP_TIMEOUT",
[0x24] = "GET_VRING_BUSYLOOP_TIMEOUT",
[0x25] = "SET_BACKEND_FEATURES",
[0x30] = "NET_SET_BACKEND",
[0x40] = "SCSI_SET_ENDPOINT",
[0x41] = "SCSI_CLEAR_ENDPOINT",
[0x42] = "SCSI_GET_ABI_VERSION",
[0x43] = "SCSI_SET_EVENTS_MISSED",
[0x44] = "SCSI_GET_EVENTS_MISSED",
[0x60] = "VSOCK_SET_GUEST_CID",
[0x61] = "VSOCK_SET_RUNNING",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
[0x26] = "GET_BACKEND_FEATURES",
};
$
At some point in the eBPFication of perf, using something like:
# perf trace -e ioctl(cmd=VHOST_VRING*)
Will setup a BPF filter right at the raw_syscalls:sys_enter tracepoint,
i.e. filtering at the origin.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-g28usrt7l59lwq3wuh8vzbig@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
e262e32d6b ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled")
That made the mount flags string table generator to switch to using
mount.h instead.
This silences the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mosz81pa6iwxko4p2owbm3ss@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As now we'll update our fs.h copy and what tools/perf/trace/beauty/mount_flags.sh
needs just got moved to mount.h, use that instead.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ls19h376xukeouxrw9dswkcn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using a copy of uapi/linux/fs.h to create the mount syscall
'flags' string table to use in 'perf trace', to convert from the number
obtained via the raw_syscalls:sys_enter into a string, using
tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6b ("vfs:
Suppress MS_* flag defs within the kernel unless explicitly enabled")
those defines got moved to linux/mount.h, so grab a copy of mount.h too.
Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i2ricmpwpdrpukfq3298jr1z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This restriction is not present in 'perf report' and since 'perf top'
uses the same hists browser, remove it from it as well.
With this we create per event buckets with callchain trees, so that
# perf top --sort dso -g --no-children
Bucketizes samples by DSO and below it shows the callchains leading to
functions in this DSO.
Try also:
# perf top -e sched:*switch -g --no-children
To see the callchains leading to sched switches, pressing 'E' to expand
all one can quickly see the most common scheduler switches and what
leads to them, for instance, calls to IO, futexes, etc.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/20190107140854.GA28965@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, its API
should be straightforward.
After discussion with Steven Rostedt, we decided to remove the
tep_data_event_from_type() API and to replace it with tep_find_event(),
as it does the same.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.913841066@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, its API
should be straightforward.
After a discussion with Steven Rostedt, we decided to rename a few APIs,
to have more intuitive names.
This patch renames tep_is_file_bigendian() to tep_file_bigendian().
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.767549746@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, its API
should be straightforward.
The tep_register_event_handler() functions returns -1 in case it
successfully registers the new event handler. Such return code is used
by the other library APIs in case of an error.
To unify the return logic of tep_register_event_handler() with the other
APIs, this patch introduces enum tep_reg_handler, which is used by this
function as return value, to handle all possible successful return
cases.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.628034497@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, its API should be
straightforward.
The trace_seq_printf() and trace_seq_vprintf() APIs have inconsistent
returned values with the other trace_seq_* APIs.
This path changes the return logic of trace_seq_printf() and
trace_seq_vprintf() to return the number of printed characters, as the
other trace_seq_* related APIs.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.485792891@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent a proper library, variables, data
structures and functions should have a unique prefix to prevent name
space conflicts. That prefix will be "tep_".
This patch renames 'struct cmdline' to 'struct tep_cmdline'.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.358871851@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch initializes the host_bigendian member of the tep_handle
structure with the byte order of the current host, when this handler is
created - in tep_alloc() API. We need this in order to remove the
tep_set_host_bigendian() API.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201040852.216292134@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new API of tracevent library: tep_override_comm() It
registers a pid / command mapping. If a mapping with the same pid
already exists, the entry is updated with the new command.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181130154648.038915912@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf on ARM requires CONFIG_KUSER_HELPERS to be turned on to allow some
independance with respect to the ARM CPU being used. Add a test which
tries to locate the [vectors] page, created when CONFIG_KUSER_HELPERS is
turned on to help asses the system's health.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20181221034337.26663-3-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for checking that the vectors page on the ARM
architecture, refactor the find_vdso_map() function to accept finding an
arbitrary string and create a dedicated helper function for that under
util/find-map.c and update the filename to find-map.c and all references
to it: perf-read-vdso.c and util/vdso.c.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20181221034337.26663-2-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were not taking into account the "... [continued]" printed
characters, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qt20y0acmf8k0bzisce8kw95@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we get the sys_enter for a syscall we check if the last one is
still waiting for its matching sys_exit, if so we print this:
468.753 ( ): firefox/32382 poll(ufds: 0x7f3988d3dd00, nfds: 7, timeout_msecs: 4294967295) ...
449.575 ( 0.004 ms): Softwar~cThrea/32434 futex(uaddr: 0x7f39a18a9b70, op: WAKE|PRIVATE_FLAG, val: 1) = 0
At some point we'll get that poll sys_exit event and will print a "[continued]" line.
While making the sizing of the alignment after the syscall arg list and
its result configurable, so that we can mimic strace, which uses a
smaller alingment by default, a bug was introduced where the closing
parens appeared before the syscall name and its arg list, fix it.
Fixes: 4b8a240ed5 ("perf trace: Add alignment spaces after the closing parens")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oi45i54s59h1w1kmgpzrfuum@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate:
Ivan Krylov:
- Pass filename to objdump via execl, fixing usage with filenames
with special characters.
perf report:
Jin Yao:
Fix wrong iteration count in --branch-history
perf stat:
Jin Yao:
- Fix endless wait for child process
perf test:
Arnaldo Carvalho de Melo:
- Use a fallback to get the pathname in vfs_getname in
tools build:
Jiri Olsa:
- Allow overriding CFLAGS assignments.
Misc:
Arnaldo Carvalho de Melo:
- Syncronize UAPI headers
Mattias Jacobsson:
- Remove redundant va_end() in strbuf_addv()
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXC+kmQAKCRCyPKLppCJ+
J4VVAPwK4rGYiuHZnYyDDICkL4TenIj/a2AQTIeLPifwCL06lQD+LOsMdIpD/SQW
PAZu/R0j0uFuuehYg2ikW1zdXLykDAg=
=2j5l
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.21-20190104' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf annotate:
Ivan Krylov:
- Pass filename to objdump via execl, fixing usage with filenames
with special characters.
perf report:
Jin Yao:
Fix wrong iteration count in --branch-history
perf stat:
Jin Yao:
- Fix endless wait for child process
perf test:
Arnaldo Carvalho de Melo:
- Use a fallback to get the pathname in vfs_getname in
tools build:
Jiri Olsa:
- Allow overriding CFLAGS assignments.
Misc:
Arnaldo Carvalho de Melo:
- Syncronize UAPI headers
Mattias Jacobsson:
- Remove redundant va_end() in strbuf_addv()
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On each sample, Monitor Mode Control Register A (MMCRA) content is
saved in pt_regs. MMCRA does not have a entry as-is in the pt_regs but
instead, MMCRA content is saved in the "dsisr" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the
"MMCRA" printing which internally maps to the "dsisr" of pt_regs.
It also check for the MMCRA availability in the platform and present
value accordingly
mpe: This was the 2nd patch in a series with commit 333804dc3b
("powerpc/perf: Update perf_regs structure to include SIER") but I
accidentally only merged the 1st patch, so merge this one now.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Given this came up couple of times, add a note to libbpf's readme
about the semi-automated mirror for a stand-alone build which is
officially managed by BPF folks. While at it, also explicitly state
the libbpf license in the readme file.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
