Currently we shutdown rc6 during i915_gem_resume() but this is called
during the preparation phase (i915_drm_prepare) for all suspend paths,
but we only want to shutdown rc6 for S3+. Move the actual shutdown to
i915_gem_suspend_late().
We then need to differentiate between suspend targets, to distinguish S0
(s2idle) where the device is kept awake but needs to be in a low power
mode (the same as runtime suspend) from the device suspend levels where
we lose control of HW and so must disable any HW access to dangling
memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111909
Fixes: c113236718 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/gem_exec_suspend/power-S0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-4-chris@chris-wilson.co.uk
An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() before the
kthreads were spawned. If this happens, the kthread is never run at all;
completely bypassing the test.
A simple yield() from the parent will ensure that all children have the
opportunity to start before we reap them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101084940.31838-1-chris@chris-wilson.co.uk
Don't just look at the very last request in a queue when deciding if we
need to evict the context from the GPU, as that request may still be in
the submission queue while the rest of the context is running!
Instead, walk back along the queued requests looking for the active
request and checking that.
Fixes: 2e0986a58c ("drm/i915/gem: Cancel contexts when hangchecking is disabled")
Testcase: igt/gem_ctx_persistence/queued
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031090104.22245-1-chris@chris-wilson.co.uk
Intended for upstream testing so that we can still exercise the LMEM
plumbing and !i915_ggtt_has_aperture paths. Smoke tested on Skull Canyon
device. This works by allocating an intel_memory_region for a reserved
portion of system memory, which we treat like LMEM. For the LMEMBAR we
steal the aperture and 1:1 it map to the stolen region.
To enable simply set the i915 modparam fake_lmem_start= on the kernel
cmdline with the start of reserved region(see memmap=). The size of the
region we can use is determined by the size of the mappable aperture, so
the size of reserved region should be >= mappable_end. For now we only
enable for the selftests. Depends on CONFIG_DRM_I915_UNSTABLE being
enabled.
eg. memmap=2G$16G i915.fake_lmem_start=0x400000000
v2: make fake_lmem_start an i915 modparam
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030173320.8850-1-matthew.auld@intel.com
Our existing behaviour is to allow contexts and their GPU requests to
persist past the point of closure until the requests are complete. This
allows clients to operate in a 'fire-and-forget' manner where they can
setup a rendering pipeline and hand it over to the display server and
immediately exit. As the rendering pipeline is kept alive until
completion, the display server (or other consumer) can use the results
in the future and present them to the user.
The compute model is a little different. They have little to no buffer
sharing between processes as their kernels tend to operate on a
continuous stream, feeding the results back to the client application.
These kernels operate for an indeterminate length of time, with many
clients wishing that the kernel was always running for as long as they
keep feeding in the data, i.e. acting like a DSP.
Not all clients want this persistent "desktop" behaviour and would prefer
that the contexts are cleaned up immediately upon closure. This ensures
that when clients are run without hangchecking (e.g. for compute kernels
of indeterminate runtime), any GPU hang or other unexpected workloads
are terminated with the process and does not continue to hog resources.
The default behaviour for new contexts is the legacy persistence mode,
as some desktop applications are dependent upon the existing behaviour.
New clients will have to opt in to immediate cleanup on context
closure. If the hangchecking modparam is disabled, so is persistent
context support -- all contexts will be terminated on closure.
We expect this behaviour change to be welcomed by compute users, who
have often been caught between a rock and a hard place. They disable
hangchecking to avoid their kernels being "unfairly" declared hung, but
have also experienced true hangs that the system was then unable to
clean up. Naturally, this leads to bug reports.
Testcase: igt/gem_ctx_persistence
Link: https://github.com/intel/compute-runtime/pull/228
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029202338.8841-1-chris@chris-wilson.co.uk
We may be missing support for the mappable aperture on some platforms.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029095856.25431-7-matthew.auld@intel.com
There is nothing to say that the obj->base.size is actually a multiple
of the block_size.
v2: Use round_up() as block_size is a power-of-two
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028220325.9325-1-chris@chris-wilson.co.uk
Currently we insert a arbitration point every 128MiB during a blitter
copy. At 8GiB/s, this is around 30ms. This is a little on the large side
if we need to inject a high priority work, so reduced it down to 8MiB or
roughly 1ms.
v2: Don't forget both fill/copy.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028203012.14566-1-chris@chris-wilson.co.uk
Keep smatch quiet,
drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1268 __igt_ctx_sseu() error: uninitialized symbol 'ret'.
drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1280 __igt_ctx_sseu() error: uninitialized symbol 'ret'.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028142652.1987-1-chris@chris-wilson.co.uk
Select a random user accessible engine for checking coherency results.
While we should check all engines, we use a random selection so that
over repeated runs we cover all.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191027225808.19437-4-chris@chris-wilson.co.uk
Avoid angering clang and smatch by using a constant value in a '&&' test,
by forcing that constant value into a boolean.
E.g.,
drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c:159:13: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
if (!delay && CONFIG_DRM_I915_PREEMPT_TIMEOUT) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025135943.12524-1-chris@chris-wilson.co.uk
We can be more aggressive in our testing by launching a number of
kthreads, where each is submitting its own copy or fill batches on a set
of random sized objects. Also since the underlying fill and copy batches
can be pre-empted mid-batch(for particularly large objects), throw in a
random mixture of ctx priorities per thread to make pre-emption a
possibility.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025172511.25742-1-matthew.auld@intel.com
Now that for all the relevant backends we do randomised testing, we need
to make sure we still sanity check the obvious cases that might blow up,
such that introducing a temporary regression is less likely. Also
rather than do this for every backend, just limit to our two memory
types: system and local.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025153728.23689-7-chris@chris-wilson.co.uk
Ditch the dubious static list of sizes to enumerate, in favour of
choosing a random size within the limits of each backing store. With
repeated CI runs this should give us a wider range of object sizes, and
in turn more page-size combinations, while using less machine time.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025153728.23689-6-chris@chris-wilson.co.uk
We can create LMEM objects, but we also need to support mapping them
into kernel space for internal use.
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Steve Hampson <steven.t.hampson@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025153728.23689-3-chris@chris-wilson.co.uk
We currently define LMEM, or local memory, as just another memory
region, like system memory or stolen, which we can expose to userspace
and can be mapped to the CPU via some BAR.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025153728.23689-1-chris@chris-wilson.co.uk
The parallel switch test has an underlying assumption that its requests
are executed in order of submission, which is only true if the backend
manages to keep up. Ensure the order of execution matches the submission
order by explicit dependencies and so when we wait on the last request,
we know we wait on completion of the entire queue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016225730.29447-1-chris@chris-wilson.co.uk
Replace sampling the engine state every so often with a periodic
heartbeat request to measure the health of an engine. This is coupled
with the forced-preemption to allow long running requests to survive so
long as they do not block other users.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-5-chris@chris-wilson.co.uk
Normally, we rely on our hangcheck to prevent persistent batches from
hogging the GPU. However, if the user disables hangcheck, this mechanism
breaks down. Despite our insistence that this is unsafe, the users are
equally insistent that they want to use endless batches and will disable
the hangcheck mechanism. We are looking at replacing hangcheck, in the
next patch, with a softer mechanism, that sends a pulse down the engine
to check if it is well. We can use the same preemptive pulse to flush an
active context off the GPU upon context close, preventing resources
being lost and unkillable requests remaining on the GPU after process
termination.
Testcase: igt/gem_ctx_exec/basic-nohangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-4-chris@chris-wilson.co.uk
Again we wish to operate on the engines, which are owned by the
intel_gt. As such it is easier, and much more consistent, to pass the
intel_gt parameter.
v2: Unexport i915_gem_load_power_context()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022141935.15733-1-chris@chris-wilson.co.uk
Loop over all engines, issuing a request for the object on each in order
to make sure we leave no stone unturned when creating an active ref. The
purpose is to make sure that we can reap a zombie object (one that is
only alive due to an active reference on the GPU) no matter where that
active reference emanates from.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022101704.5618-1-chris@chris-wilson.co.uk
With the last user, i915_vma_parked(), retired, there are no more users
of the per-gt pm notifications and we can remove the unused
infrastructure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021183236.21790-2-chris@chris-wilson.co.uk
Currently even though i915_vma_parked() operates on a per-gt struct, it
is called from a global pm notify. This oddity was only because the long
term plan is to decouple the vma cache from the pm notification, but
right now the oddity stands out like a sore thumb!
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021183236.21790-1-chris@chris-wilson.co.uk
Convert stolen memory over to a region object. Still leaves open the
question with what to do with pre-allocated objects...
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-3-matthew.auld@intel.com
Convert shmem to an intel_memory_region.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-2-matthew.auld@intel.com
Medium term goal is to eliminate the i915->engine[] array and to get there
we have recently introduced equivalent array in intel_gt. Now we need to
migrate the code further towards this state.
This next step is to eliminate usage of i915->engines[] from the
for_each_engine_masked iterator.
For this to work we also need to use engine->id as index when populating
the gt->engine[] array and adjust the default engine set indexing to use
engine->legacy_idx instead of assuming gt->engines[] indexing.
v2:
* Populate gt->engine[] earlier.
* Check that we don't duplicate engine->legacy_idx
v3:
* Work around the initialization order issue between default_engines()
and intel_engines_driver_register() which sets engine->legacy_idx for
now. It will be fixed properly later.
v4:
* Merge with forgotten v2.5.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017161852.8836-1-tvrtko.ursulin@linux.intel.com
The HW performs swizzling as part of its fence tiling inside the Global
GTT. We already do the probing of the HW settings from the GGTT setup,
complete the picture by storing the information as part of the GGTT. The
primary benefit is the consistency of our probe routines do not break
the i915_ggtt encapsulation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016143234.4075-2-chris@chris-wilson.co.uk
We would like to make use of perf in Vulkan. The Vulkan API is much
lower level than OpenGL, with applications directly exposed to the
concept of command buffers (pretty much equivalent to our batch
buffers). In Vulkan, queries are always limited in scope to a command
buffer. In OpenGL, the lack of command buffer concept meant that
queries' duration could span multiple command buffers.
With that restriction gone in Vulkan, we would like to simplify
measuring performance just by measuring the deltas between the counter
snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the
more complex scheme we currently have in the GL driver, using 2
MI_RECORD_PERF_COUNT commands and doing some post processing on the
stream of OA reports, coming from the global OA buffer, to remove any
unrelated deltas in between the 2 MI_RECORD_PERF_COUNT.
Disabling preemption only apply to a single context with which want to
query performance counters for and is considered a privileged
operation, by default protected by CAP_SYS_ADMIN. It is possible to
enable it for a normal user by disabling the paranoid stream setting.
v2: Store preemption setting in intel_context (Chris)
v3: Use priorities to avoid preemption rather than the HW mechanism
v4: Just modify the port priority reporting function
v5: Add nopreempt flag on gem context and always flag requests
appropriately, regarless of OA reconfiguration.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-4-chris@chris-wilson.co.uk
UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)
Cross-subsystem Changes:
-MAINTAINERS:
-Add Alyssa & Steven as panfrost reviewers (Rob)
-Add Jernej as DE2 reviewer (Maxime)
-Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)
Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
-Add lazy unmapping for gem bo's (Thomas)
-Unify and rationalize vram mm and gem vram (Thomas)
-Expose vmap and vunmap for gem vram objects (Thomas)
-Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)
Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
-Add error event printing (behind CONFIG) and reg dump support (Lowry)
-Add suspend/resume support (Lowry)
-Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
-Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
-A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
-Add module param to switch resource reuse workaround on/off (Gerd)
-Avoid calling vmexit while holding spinlock (Gerd)
-Use gem shmem helpers instead of ttm (Gerd)
-Accommodate command buffer allocations too big for cma (David)
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl2d9h8ACgkQcywAJXLc
r3ms5gf9HIFpqwJ16CqaRukSnpcBcDoYUM8DGrOic+vw2bw14BQwFqvEOqrCkKL4
V6h/OCJlNFPtOcc1LvU/jeXxYf4AQWh/2qZeg+oee7HAGX5x8Y3f08GsEjO8+55t
QvSVxCKVti04M1ErPRfKrM7KPVE+IC+KdY26nO8Bf5zDGeCAkiPIDrdh2aZGMRdC
Eer0DJ96cgWW9LrhseCdj5nKwcR78DlbWa79zuPAss4LaBBbXqThNXYYzg/mZMKB
+VYgzs48tGYKK1NXXJ6biVI3brHrM52bqv5JpIncD5HepF1oIartWOMnbAO7MAqh
h/tgJWxL+4bnl9aqY87by1BtyVgl3w==
=kaOE
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-10-09-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.5:
UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)
Cross-subsystem Changes:
-MAINTAINERS:
-Add Alyssa & Steven as panfrost reviewers (Rob)
-Add Jernej as DE2 reviewer (Maxime)
-Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)
Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
-Add lazy unmapping for gem bo's (Thomas)
-Unify and rationalize vram mm and gem vram (Thomas)
-Expose vmap and vunmap for gem vram objects (Thomas)
-Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)
Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
-Add error event printing (behind CONFIG) and reg dump support (Lowry)
-Add suspend/resume support (Lowry)
-Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
-Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
-A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
-Add module param to switch resource reuse workaround on/off (Gerd)
-Avoid calling vmexit while holding spinlock (Gerd)
-Use gem shmem helpers instead of ttm (Gerd)
-Accommodate command buffer allocations too big for cma (David)
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST
# gpg: using RSA key 732C002572DCAF79
# gpg: Can't check signature: public key not found
# Conflicts:
# drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
# drivers/gpu/drm/i915/i915_drv.c
# drivers/gpu/drm/i915/i915_gem.c
# drivers/gpu/drm/i915/i915_gem_gtt.c
# drivers/gpu/drm/i915/i915_vma.c
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
In the case where data fails to be allocated the error exit path is
via label 'out' where data is dereferenced in a for-loop. Fix this
by exiting via the label 'out_file' instead to avoid the null pointer
dereference.
Addresses-Coverity: ("Dereference after null check")
Fixes: 50d16d44cc ("drm/i915/selftests: Exercise context switching in parallel")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009100024.23077-1-colin.king@canonical.com
Volatile objects are marked as DONTNEED while pinned, therefore once
unpinned the backing store can be discarded. This is limited to kernel
internal objects.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008160116.18379-4-matthew.auld@intel.com
Some kernel internal objects may need to be allocated as a contiguous
block, also thinking ahead the various kernel io_mapping interfaces seem
to expect it, although this is purely a limitation in the kernel
API...so perhaps something to be improved.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Michael J Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008160116.18379-3-matthew.auld@intel.com
Support memory regions, as defined by a given (start, end), and allow
creating GEM objects which are backed by said region. The immediate goal
here is to have something to represent our device memory, but later on
we also want to represent every memory domain with a region, so stolen,
shmem, and of course device. At some point we are probably going to want
use a common struct here, such that we are better aligned with say TTM.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008160116.18379-2-matthew.auld@intel.com
UAPI Changes:
- Never allow userptr into the mappable GGTT (Chris)
No existing users. Avoid anyone from even trying to
spare a deadlock scenario.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Eliminate struct_mutex use as BKL! (Chris)
Only used for execbuf serialisation.
- Initialize DDI TC and TBT ports (D-I) on Tigerlake (Lucas)
- Fix DKL link training for 2.7GHz and 1.62GHz (Jose)
- Add Tigerlake DKL PHY programming sequences (Clinton)
- Add Tigerlake Thunderbolt PLL divider values (Imre)
- drm/i915: Use helpers for drm_mm_node booleans (Chris)
- Restrict L3 remapping sysfs interface to dwords (Chris)
- Fix audio power up sequence for gen10+ display (Kai)
- Skip redundant execlist resubmission (Chris)
- Only unwedge if we can reset GPU first (Chris)
- Initialise breadcrumb lists on the virtual engine (Chris)
- Don't rely on kernel context existing during early errors (Matt A)
- Update Icelake+ MG_DP_MODE programming table (Clinton)
- Update DMC firmware for Icelake (Anusha)
- Downgrade DP MST error after unplugging TypeC cable (Srinivasan)
- Limit MST modes based on plane size too (Ville)
- Polish intel_tv_mode_valid() (Ville)
- Fix g4x sprite scaling stride check with GTT remapping (Ville)
- Don't advertize non-exisiting crtcs (Ville)
- Clean up encoder->crtc_mask setup (Ville)
- Use tc_port instead of port parameter to MG registers (Jose)
- Remove static variable for aux last status (Jani)
- Implement a better i945gm vblank irq vs. C-states workaround (Ville)
- Make the object creation interface consistent (CQ)
- Rename intel_vga_msr_write() to intel_vga_reset_io_mem() (Jani, Ville)
- Eliminate previous drm_dbg/drm_err usage (Jani)
- Move gmbus setup down to intel_modeset_init() (Jani)
- Abstract all vgaarb access to intel_vga.[ch] (Jani)
- Split out i915_switcheroo.[ch] from i915_drv.c (Jani)
- Use intel_gt in has_reset* (Chris)
- Eliminate return value for i915_gem_init_early (Matt A)
- Selftest improvements (Chris)
- Update HuC firmware header version number format (Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007134801.GA24313@jlahtine-desk.ger.corp.intel.com
Our other backends return an actual error value upon failure. Do the
same for stolen objects, which currently just return NULL on failure.
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004170452.15410-2-matthew.auld@intel.com
Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.
v2: Focus on lock tracking; ctx->vm is protected by ctx->mutex
v3: Correct split with removal of logical HW ID
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-15-chris@chris-wilson.co.uk
With the introduction of ctx->engines[] we allow multiple logical
contexts to be used on the same engine (e.g. with virtual engines).
According to bspec, aach logical context requires a unique tag in order
for context-switching to occur correctly between them. [Simple
experiments show that it is not so easy to trick the HW into performing
a lite-restore with matching logical IDs, though my memory from early
Broadwell experiments do suggest that it should be generating
lite-restores.]
We only need to keep a unique tag for the active lifetime of the
context, and for as long as we need to identify that context. The HW
uses the tag to determine if it should use a lite-restore (why not the
LRCA?) and passes the tag back for various status identifies. The only
status we need to track is for OA, so when using perf, we assign the
specific context a unique tag.
v2: Calculate required number of tags to fill ELSP.
Fixes: 976b55f0e1 ("drm/i915: Allow a context to define its set of engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111895
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-14-chris@chris-wilson.co.uk
