The crossbar configuration is usually the same across all designs for a
given SoC generation. But sometimes there are designs that require some
other configuration.
Implement support for parsing the crossbar configuration from a device
tree. If the crossbar configuration is not present in the device tree,
fall back to the default crossbar configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The version of VIC found in Tegra186 and later incorporates improvements
with regards to context isolation. As part of those improvements, stream
ID registers were added that allow to specify separate stream IDs for
the Falcon microcontroller and the VIC memory interface.
While it is possible to also set the stream ID dynamically at runtime to
allow userspace contexts to be completely separated, this commit doesn't
implement that yet. Instead, the static VIC stream ID is programmed when
the Falcon is booted. This ensures that memory accesses by the Falcon or
the VIC are properly translated via the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Upon driver failure, the driver core will take care of clearing the
driver data, so there's no need to do so explicitly in the driver.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra186 and later, the ARM SMMU provides an input address space that
is 48 bits wide. However, memory clients can only address up to 40 bits.
If the geometry is used as-is, allocations of IOVA space can end up in a
region that cannot be addressed by the memory clients.
To fix this, restrict the IOVA space to the DMA mask of the host1x
device. Note that, technically, the IOVA space needs to be restricted to
the intersection of the DMA masks for all clients that are attached to
the IOMMU domain. In practice using the DMA mask of the host1x device is
sufficient because all host1x clients share the same DMA mask.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move initialization of the shared IOMMU domain after the host1x device
has been initialized. At this point all the Tegra DRM clients have been
attached to the shared IOMMU domain.
This is important because Tegra186 and later use an ARM SMMU, for which
the driver defers setting up the geometry for a domain until a device is
attached to it. This is to ensure that the domain is properly set up for
a specific ARM SMMU instance, which is unknown at allocation time.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Loading the firmware requires an allocation of IOVA space to make sure
that the VIC's Falcon microcontroller can read the firmware if address
translation via the SMMU is enabled.
However, the allocation currently happens at a time where the geometry
of an IOMMU domain may not have been initialized yet. This happens for
example on Tegra186 and later where an ARM SMMU is used. Domains which
are created by the ARM SMMU driver postpone the geometry setup until a
device is attached to the domain. This is because IOMMU domains aren't
attached to a specific IOMMU instance at allocation time and hence the
input address space, which defines the geometry, is not known yet.
Work around this by postponing the firmware load until it is needed at
the time where a channel is opened to the VIC. At this time the shared
IOMMU domain's geometry has been properly initialized.
As a byproduct this allows the Tegra DRM to be created in the absence
of VIC firmware, since the VIC initialization no longer fails if the
firmware can't be found.
Based on an earlier patch by Dmitry Osipenko <digetx@gmail.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tegra DRM clients need access to their parent, so store a pointer to it
upon registration. It's technically possible to get at this by going via
the host1x client's parent and getting the driver data, but that's quite
complicated and not very transparent. It's much more straightforward and
natural to let the children know about their parent.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
update_wm_post is meant for pre-g4x only. Don't ever set
it on g4x+.
The only effect of a bogus update_wm_post on g4x+ could
be that we clear the legacy_cursor_update flag in
intel_atomic_commit(). Since legacy_cursor_update is
only set for legacy cursor updates (as the name suggests)
and we only set update_wm_post for a modeset the two
cases should never occur at the same time. But let's
be consistent in setting update_wm_post so we don't
end up confusing so many people.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206185433.8116-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Apply backpressure to hogs that emit requests faster than the GPU can
process them by waiting for their ring to be less than half-full before
proceeding with taking the struct_mutex.
This is a gross hack to apply throttling backpressure, the long term
goal is to remove the struct_mutex contention so that each client
naturally waits, preferably in an asynchronous, nonblocking fashion
(pipelined operations for the win), for their own resources and never
blocks another client within the driver at least. (Realtime priority
goals would extend to ensuring that resource contention favours high
priority clients as well.)
This patch only limits excessive request production and does not attempt
to throttle clients that block waiting for eviction (either global GTT or
system memory) or any other global resources, see above for the long term
goal.
No microbenchmarks are harmed (to the best of my knowledge).
Testcase: igt/gem_exec_schedule/pi-ringfull-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207071829.5574-1-chris@chris-wilson.co.uk
Add err goto label and use it when VMA can't be established or changes
underneath.
v2:
- Dropping Fixes: as it's indeed impossible to race an object to the
error address. (Chris)
v3:
- Use IS_ERR_VALUE (Chris)
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v2
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-2-joonas.lahtinen@linux.intel.com
Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.
A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.
v2:
- Refactor the compare function
Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
My @samusung.com address is going to cease existing soon, so change it to
an address which can actually be used to contact me.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This commit adds support for s5pv210.
Currently only NV12 and XRGB8888 formats are supported.
It was tested by using tool from
https://www.spinics.net/lists/linux-samsung-soc/msg60498.html
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
A patch set from Christoph for vmwgfx dma mode detection breakage with the
new dma code restructuring in 5.0
A couple of fixes also CC'd stable
Finally an improved IOMMU detection that automatically enables dma mapping
also with other vIOMMUS than the intel one if present and enabled.
Currently trying to start a VM in that case would fail catastrophically.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206194735.4663-1-thellstrom@vmware.com
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131010015.GA32272@embeddedor
This hotplug also isn't needed: drm_dp_mst_topology_mgr_set_mst()
already sends a hotplug on its own from drm_dp_destroy_connector_work()
after destroying connectors in the MST topology.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-4-lyude@redhat.com
We have a bad habit of calling drm_fb_helper_hotplug_event() far more
then we actually need to. MST appears to be one of these cases, where we
call drm_fb_helper_hotplug_event() if we fail to resume a connected MST
topology in intel_dp_mst_resume(). We don't actually need to do this at
all though since hotplug events are already sent from
drm_dp_connector_destroy_work() every time connectors are unregistered
from userspace's PoV. Additionally, extra calls to
drm_fb_helper_hotplug_event() also just mean more of a chance of doing a
connector probe somewhere we shouldn't.
So, don't send any hotplug events during resume if the MST topology
fails to come up. Just rely on the DP MST helpers to send them for us.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-3-lyude@redhat.com
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
Looks like when making the final revision of:
commit 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
I forgot to remove some of the comments that I had added to
drm_dp_atomic_find_vcpi_slots() and drm_dp_atomic_release_vcpi_slots()
that were no longer valid due to us having removed the state->duplicated
checks from each function. This also introduced an error while building
the docs with sphinx:
./drivers/gpu/drm/drm_dp_mst_topology.c:3100: WARNING: Inline literal
start-string without end-string.
So, fix that by just removing the kerneldoc comments.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
[Why]
Pipe related init is possible to optimized if we know what we
intend to program, and if we can determine it matches what is
already programmed for the pipe.
[How]
First step is to isolate the pipe related init code
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Keep enable_stream_timing programming only
timing related stuff.
[How]
Move DRR and static screen mask programming from
enable_stream_timing to outside in
apply_single_controller_ctx_to_hw
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we determine the stream we are trying to commit
matches HW, we want to try to optimize.
[How]
Try to acquire the HW resources that are already enabled
and optimize.
Also skip backend reprogramming
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to understand whether link is active aside from stream state.
This could be used to check what links are enabled by GOP.
[How]
Store link_active state in link status and initialize it by checking
if the DIG is enabled.
Keep it updated on every link enable and disable
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
More clearly isolate the code that is involved in programming of
vupdate interrupt
[How]
Add function for programming of vupdate interrupt.
Call it after timing is programmed.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to figure out whether a timing we want to commit matches
something that GOP already programmed, in which case
we can decide to some optimizations
[How]
1. Add way to check for DIG FE
2. Add way to check for matching OTG timing
3. Add way to check for matching pixel clock (if possible)
- Currently only support DP for pixel clock, since it is easy to calc
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When moving mouse onto or off of pip plane,
screen would flash briefly due to garbage negative
pos values being programmed for cursor.
Also, text flashes due to PIP flips taking too long.
[How]
When negative pos value seen, default to 0 and adjust by modifying cursor hotspot.
For flip issue, only do post update when optimize required vs all the time.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current implementation that maps link_rate_set value to
actual link rate is incorrect.
[How]
Fix this implementation, such that link_rate_set indexes into
the supported_link_rate table.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VM_helper needs to be intialized with the dc struct in order to fix
an unallocated memory issue. System aperture settings should be
initialized to 0 and guarded with a check to make sure vm_config
is valid.
[How]
Allocate and free memory for vm_helper with other dc members.
Check whether the vm_config valid bit is set before initializing
aperture settings.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Bandwidth calculation formulas currently do not take Stereo 3D + Stutter
properly into account. Disable stutter feature when we detect a Stereo
3D mode as a temporary workaround.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to calcualte vline position in DC for DCN.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dc_sink was released but the pointer on the aconnector was
not cleared.
[How]
Clear it.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are opt1c lock warnings and CRTC read timeouts when running the
"igt@kms_plane@plane-position-hole-dpms-pipe-*" tests. These are
caused by trying to reprogram planes that are not in the current
context.
DPMS off removes the stream from the context. In this case:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are reprogrammed before the stream is removed from the
context because stream_state->mode_changed = false.
For DPMS adds the stream and planes back to the context:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are also reprogrammed here before the stream is added to the
context because stream_state->mode_changed = true. They were not
previously in the current context so warnings occur here.
[How]
Set stream_state->mode_changed = true when
new_crtc_state->active_changed = true too.
This prevents reprogramming before the context is applied in DC. The
programming will be done after the context is applied.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove extraneous parentheses around the comparison
to silence this warning
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On icl the plane watermark blocks field is 11 bits. Bump our define to
match so that readout won't ignore the extra bit. We can safely do this
for older platforms too since the unused bits are hardwired to zero.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205205056.30081-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Since commit b4935e3a3c ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.
To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.
Fixes: b4935e3a3c ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Commit edb715dffd ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.
Fixes: edb715dffd ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.
Fixes: f3ed97f9ae ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.
No ill-effect in the current code base but lets fix it for correctness.
At the same time tidy the assert for readability and robustness.
v2:
* One check per assert. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
Certain SNB machines (eg. ASUS K53SV) seem to have a broken BIOS
which misprograms the hardware badly when encountering a suitably
high resolution display. The programmed pipe timings are somewhat
bonkers and the DPLL is totally misprogrammed (P divider == 0).
That will result in atomic commit timeouts as apparently the pipe
is sufficiently stuck to not signal vblank interrupts.
IIRC something like this was also observed on some other SNB
machine years ago (might have been a Dell XPS 8300) but a BIOS
update cured it. Sadly looks like this was never fixed for the
ASUS K53SV as the latest BIOS (K53SV.320 11/11/2011) is still
broken.
The quickest way to deal with this seems to be to shut down
the pipe+ports+DPLL. Unfortunately doing this during the
normal sanitization phase isn't quite soon enough as we
already spew several WARNs about the bogus hardware state.
But it's better than hanging the boot for a few dozen seconds.
Since this is limited to a few old machines it doesn't seem
entirely worthwile to try and rework the readout+sanitization
code to handle it more gracefully.
v2: Fix potential NULL deref (kbuild test robot)
Constify has_bogus_dpll_config()
Cc: stable@vger.kernel.org # v4.20+
Cc: Daniel Kamil Kozar <dkk089@gmail.com>
Reported-by: Daniel Kamil Kozar <dkk089@gmail.com>
Tested-by: Daniel Kamil Kozar <dkk089@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109245
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111174950.10681-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit 7bed8adcd9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205141846.6053-1-ville.syrjala@linux.intel.com
[Why]
This fixes an mpc programming error for the following sequence of
atomic commits when pipe split is enabled:
Commit 1: CRTC0 (plane 4, plane 3)
Pipe 0: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 1: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Pipe 2: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 3: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Commit 2: CRTC0 (plane 3), CRTC1 (plane 2)
Pipe 0: old_plane_state = A1, new_plane_state = A2, new_tg = T0
Pipe 1: old_plane_state = B1, new_plane_state = B2, new_tg = T1
Pipe 2: old_plane_state = A1, new_plane_state = NULL, new_tg = NULL
Pipe 3: old_plane_state = B1, new_plane_state = NULL, new_tg = NULL
In the second commit the assertion for mpcc in use is hit because
mpcc disconnect never occurs for pipe 1. This is because the stream
changes for pipe 1 and the opp_list is empty.
This sequence occurs when running the
"igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two
displays connected.
[How]
Expand the reset condition to include:
"old_pipe_ctx->stream_res.tg != new_pipe_ctx->stream_res.tg"
...but only when the plane state is non-NULL for both old and new.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It fixes the failure to create stream for sink in the scenario
when hotplug SST and MST in sequence, and disconnect MST.
[How]
Add the fake sink back after the majority of MST rework is done.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a bit vector to allow forcing odm on specific otgs
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in program_timing_sync, after all the pipes are
grouped, store timing sync info in dc_stream_status
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reduced backlight for ABM 2.2 at levels 1 and 2 is desired for
power savings.
[How]
Reduce the max reduction parameters for ABM 2.2
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When querying HPD via GPIO flow,
it will create a new gpio object then free in the end of query.
There is a irql issue for HPD querying at ISR level.
[How]
Therefore, creating the HPD gpio object in dc_link and set it as unlcok in default.
1. reducing unnecessary malloc/free when HPD querying.
2. reducing init GPIO flow.
3. add lock/unlock to prevent multi gpio service running.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
is_blanked is not a general indicator of if a pipe is synced
for all asics.
plane state is more accurate and applicable for all asics.
[how]
Remove is_blanked call and
add checking plane_state against NULL instead.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On HW that doesn't have input LUT, we may combine degamma with OS ramp
Problem here is that it assumes DGAM is inverse of PQ or SRGB. It doesn't
handle linear case, it would default to sRGB and always enable DGAM..
[How] Add handling for linear case. Also check for null ramp and instead of
blowing up, assume it's identity.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting monitor refresh rate below freesync range would cause the
monitor to go blank indefinitely with freesync enabled
[How]
Set vrr_supported and ignore_msa_timing_param according to whether
the refresh rate is above or below the minimum freesync frequency.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Second screen to clone/extend mode, driver will send ABM pipe
command to DMCU. Change mode from clone/extend to second
screen only, driver send ABM level command to disable ABM but
this command will not clear ABM pipe data. At this time, change
second screen to PC screen only, driver will send first command
"ABM_LEVEL", it will turn on ABM with incorrect ABM pile so that
DMCU is blocking.
[How]
When driver try to disable ABM, change command from "ABM LEVEL"
to "ABM PIPE" so that it will clear ABM pile data.
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The problem is that we accidentally stopped loading some of the IRAM bytes
used for the backlight ramping mechanism. This happened when we
started reserving some region of IRAM as DMCU FW write only.
[How]
This change will define a start+end region for the IRAM read only region.
So the parameters needed for the backlight operation will be loaded
since it will be defined outside of the read only region.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Different panel need different time from backlight disable to end of valid video data,
if the time is too short, panel will flash when dpms off
[How]
Add monitor patch to control the time from backlight disable to end of valid video data,
Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This provides little debug value and creates a lot of dmesg noise.
[How]
Remove it.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The stream_update struct is left unitialized but DC will access
its fields. This usually results in global state validation occur
during any atomic commit with state->allow_modeset = true.
[How]
Initialize the struct to zero for every stream we check.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The indenting for this function is a few levels too deep and can be
simplified a fair bit. This patch is in preparation for functional
changes that fix update type determination to occur less frequently
and more accurately.
[How]
Place checks early and exit/continue when possible. This isn't
a functional change.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We were always passing the first surface on the stream status for
flip updates when we should be using the surface associated with
the plane.
[How]
Use the dc_plane_state from the plane that's being updated.
FreeSync should also only keep track of updates from the primary
plane, so the check needed to be updated.
The acrtc->stream state doesn't need to be checked for NULL before
updating FreeSync either since there needs to be a stream to be
inside this function as a prerequisite.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Most surface updates weren't propagated onto the surface during
dc_commit_updates_for_stream. This makes it more difficult for DC to
determine the actual surface update type required.
[How]
Use copy_surface_update_to_plane to propagate the changes. The FreeSync
surface timing information update for BTR has been moved out of
amdgpu_dm.c into this function as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
"IRQ_HPD Pulse Length Test" DP compliance test
fails. Test complains that certain DPCD registers
are not read within 100 ms.
[How]
msleep is inaccurate for small values. Used udelay
instead for accuracy.
Signed-off-by: John Barberiz <John.Barberiz@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we open up the possibility to use uninitialized memory.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[What]
FBC fails to get enabled when switched between LINEAR(console/VT)
and non-LINEAR(GUI) based rendering due to default value of
tiling info stored in the current_state which is used for deciding
whether or not to turn FBC on or off.
[How]
Use context structure's tiling information which is coherant with
the screen updates.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When CONFIG_DEBUG_FS isn't defined then amdgpu_dm_crtc_set_crc_source
is NULL. This causes a compilation error since it's being called
unconditionally.
[How]
Guard the call based on CONFIG_DEBUG_FS - CRC capture isn't supported
without this.
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Fixes: 43a6a02eb3 ("drm/amd/display: Re-enable CRC capture following modeset")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I'm not increasing the DRM version because GDS isn't totally without bugs yet.
v2: update emit_ib_size
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New chunk for dependency on start of job's execution instead on
the end. This is used for GPU deadlock prevention when
userspace uses mid-IB fences to wait for mid-IB work on other rings.
v2: Fix typo in AMDGPU_CHUNK_ID_SCHEDULED_DEPENDENCIES
v3: Bump KMS version
v4: put old fence AFTER acquiring the scheduled fence.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian Koenig <Christian.Koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update soc boot and max level,then uclk isn't stuck
at minimum.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109462
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2314:38:
warning: suggest braces around initialization of subobject
[-Wmissing-braces]
struct dc_surface_dcc_cap output = {0};
^
{}
Previous efforts to fix this type of warning by adding or removing
braces have been met with some pushback in favor of using memset [1][2].
Do that here, mirroring commit 05794eff1a ("drm/amdgpu/gmc: fix
compiler errors [-Werror,-Wmissing-braces] (V2)") in this tree.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: 7df7e505e8 ("drm/amd/display: Set requested plane state DCC params for GFX9")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5089:60:
warning: suggest braces around initialization of subobject
[-Wmissing-braces]
struct dc_surface_update dummy_updates[MAX_SURFACES] = { 0 };
^
{}
Previous efforts to fix this type of warning by adding or removing
braces have been met with some pushback in favor of using memset [1][2].
Do that here, mirroring commit 05794eff1a ("drm/amdgpu/gmc: fix
compiler errors [-Werror,-Wmissing-braces] (V2)") in this tree.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: 02d6a6fcdf ("drm/amd/display: Simplify underscan and ABM commit")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:50:57:
warning: suggest braces around initialization of subobject
[-Wmissing-braces]
union training_aux_rd_interval training_rd_interval = {0};
^
{}
1 warning generated.
Previous efforts to fix this type of warning by adding or removing
braces have been met with some pushback in favor of using memset [1][2].
Do that here, mirroring commit 05794eff1a ("drm/amdgpu/gmc: fix
compiler errors [-Werror,-Wmissing-braces] (V2)") in this tree.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: 3cec41769d ("drm/amd/display: Fix use of uninitialized union")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atomic checks should never modify anything outside of the state that
they're passed in. Unfortunately this appears to be exactly what we're
doing in nv50_msto_atomic_check() where we update mstc->pbn every time
the function is called. This hasn't caused any bugs yet, but it needs to
be fixed in order to ensure that when committing an artificially
duplicated state (like during system resume), that we reuse the PBN of
that state to perform VCPI allocations and don't recalculate a different
value from the drm connector's reported bpc.
Also, move the VCPI slot allocations while we're at it as well. With
this, removing a topology in suspend while using nouveau no longer
causes the new atomic VCPI helpers to complain.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
Since
commit 39b50c6038 ("drm/atomic_helper: Stop modesets on unregistered
connectors harder")
We've been failing atomic checks if they try to enable new displays on
unregistered connectors. This is fine except for the one situation that
breaks atomic assumptions: suspend/resume. If a connector is
unregistered before we attempt to restore the atomic state, something we
end up failing the atomic check that happens when trying to restore the
state during resume.
Normally this would be OK: we try our best to make sure that the atomic
state pre-suspend can be restored post-suspend, but failures at that
point usually don't cause problems. That is of course, until we
introduced the new atomic MST VCPI helpers:
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5]
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5]
[drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd
CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea
RSP: 0018:ffff88841235f268 EFLAGS: 00010246
RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0
RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92
R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80
R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000
FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper]
? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper]
? __printk_safe_exit+0x10/0x10
? save_stack+0x8c/0xb0
? vprintk_func+0x96/0x1bf
? __printk_safe_exit+0x10/0x10
intel_atomic_check+0x234/0x4750 [i915]
? printk+0x9f/0xc5
? kmsg_dump_rewind_nolock+0xd9/0xd9
? _raw_spin_lock_irqsave+0xa4/0x140
? drm_atomic_check_only+0xb1/0x28b0 [drm]
? drm_dbg+0x186/0x1b0 [drm]
? drm_dev_dbg+0x200/0x200 [drm]
? intel_link_compute_m_n+0xb0/0xb0 [i915]
? drm_mode_put_tile_group+0x20/0x20 [drm]
? skl_plane_format_mod_supported+0x17f/0x1b0 [i915]
? drm_plane_check_pixel_format+0x14a/0x310 [drm]
drm_atomic_check_only+0x13c4/0x28b0 [drm]
? drm_state_info+0x220/0x220 [drm]
? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper]
? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper]
? kasan_unpoison_shadow+0x35/0x40
drm_atomic_commit+0x3b/0x100 [drm]
drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper]
drm_mode_setcrtc+0x636/0x1660 [drm]
? vprintk_func+0x96/0x1bf
? drm_dev_dbg+0x200/0x200 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? printk+0x9f/0xc5
? mutex_unlock+0x1d/0x40
? drm_mode_addfb2+0x2e9/0x3a0 [drm]
? rcu_sync_dtor+0x2e0/0x2e0
? drm_dbg+0x186/0x1b0 [drm]
? set_page_dirty+0x271/0x4d0
drm_ioctl_kernel+0x203/0x290 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_setversion+0x7f0/0x7f0 [drm]
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x34/0x70
drm_ioctl+0x445/0x950 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_getunique+0x220/0x220 [drm]
? expand_files.part.10+0x920/0x920
do_vfs_ioctl+0x1a1/0x13d0
? ioctl_preallocate+0x2b0/0x2b0
? __fget_light+0x2d6/0x390
? schedule+0xd7/0x2e0
? fget_raw+0x10/0x10
? apic_timer_interrupt+0xa/0x20
? apic_timer_interrupt+0xa/0x20
? rcu_cleanup_dead_rnp+0x2c0/0x2c0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x136/0x440
? syscall_return_slowpath+0x2d0/0x2d0
? do_page_fault+0x89/0x330
? __do_page_fault+0x9c0/0x9c0
? prepare_exit_to_usermode+0x188/0x200
? perf_trace_sys_enter+0x1090/0x1090
? __x64_sys_sigaltstack+0x280/0x280
? __put_user_4+0x1c/0x30
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f16ff89a09b
Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b
RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460
R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
---[ end trace d536c05c13c83be2 ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a
This appears to be happening because we destroy the VCPI allocations
when disabling all connected displays while suspending, and those VCPI
allocations don't get restored on resume due to failing to restore the
atomic state.
So, fix this by introducing the suspending option to
drm_atomic_helper_duplicate_state() and use that to indicate in the
atomic state that it's being used for suspending or resuming the system,
and thus needs to be fixed up by the driver. We can then use the new
state->duplicated hook to tell update_connector_routing() in
drm_atomic_check_modeset() to allow for modesets on unregistered
connectors, which allows us to restore atomic states that contain MST
topologies that were removed after the state was duplicated and thus:
mostly fixing suspend and resume. This just leaves some issues that were
introduced with nouveau, that will be addressed next.
Changes since v3:
* Remove ->duplicated hunks that I left in the VCPI helpers by accident.
These don't need to be here, that was the supposed to be the purpose
of the last revision
Changes since v2:
* Remove the changes in this patch to the VCPI helpers, they aren't
needed anymore
Changes since v1:
* Rename suspend_or_resume to duplicated
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-4-lyude@redhat.com
[Why]
eDP was missing in the checks for supported VRR connectors.
[How]
Attach the properties for eDP connectors too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202449
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we now have an easy way of refcounting drm_dp_mst_port structs and
safely accessing their contents, there isn't any good reason to keep
validating ports here. It doesn't prevent us from performing modesets on
branch devices that have been removed either, and we already disallow
enabling new displays on unregistered connectors in
update_connector_routing() in drm_atomic_check_modeset(). All it does is
cause us to have to make weird special exceptions in our atomic
modesetting code. So, get rid of it entirely.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-3-lyude@redhat.com
Disabling WM1+ on ICL causes tons of underruns with
linear/X-tiled framebuffers. We can avoid this by flipping
on a chicken bit affecting the way the hw fill the FIFO.
This may not be the final solution but should hopefully
avoid some underruns in the meantime.
v2: Apparently PIPE_CHICKEN is icl+ only
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204202232.27153-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
When adding the early latency==0 check back I neglected to
realize that we no longer have a way to return a failure
from the wm computation like we had in the past (since we
now calculate wms before ddb allocations). Also plane_en
being false doesn't actually indicate that the level is
invalid as it wil also happen when the plane is not
enabled.
skl_allocate_pipe_ddb() starts scanning from the maximum
watermark level and it stops as soon as it finds a level
that is deemed viable. The assumption being that if level
n+1 is valid then level n is valid as well. Thus if we
now disable any watermark level by zeroing its latency
the code will think that level to be actually valid
and won't confirm whether the actually enabled lower
watermark level(s) actually fit into the allotted ddb
space. This results in hilarious watermark values that
exceed the ddb allocation of the plane.
The way we must now indicate a failure is to assign an
unreasoanbly big value to min_ddb_alloc which will then
make skl_allocate_pipe_ddb() reject the entire level.
v2: Also do the same for the lines>31 case (Matt)
v3: Make 'blocks' u32 (Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205155053.10081-1-ville.syrjala@linux.intel.com
clear_intel_crtc_state() uses the stack for saving a temporary copy of
certain bits of the inherited crtc_state before clearing the unwanted
bits. This pushes it over the stack limit for my little 32b Pineview,
so move the temporary allocation to the heap instead. As we now use a
zeroed struct, we can copy the whole extended state back to both
preserve what bits need to be preserved and zero the rest.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205092759.16018-1-chris@chris-wilson.co.uk
We generally omit register polling from the i915_reg_rw tracepoint.
Understandable since polling could generate a lot of noise in the
trace. The downside is that the trace is incomplete. As a compromise
let's trace the final register value observed while polling. That
should be generally sufficient to observe what the code should be
doing next.
I suppose in some cases it might make sense to also trace the initial
register value, and maybe the number of times we polled. But that
would require a separate tracepoint so let's leave it for the future.
The other users of _NOTRACE() are i915_pmu and i2c bitbanging,
which I decided to leave alone.
Next we should do something to claw back the tracepoints for
planes and whatnot which were switched to _FW() a while back.
I guess just new macros for raw_rw+trace. The question is
what to call it?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204211644.21967-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The contents of struct encoder_kickoff_params are never used. Remove the
structure and all remnants of it from function calls.
Changes in v2 (seanpaul):
- Actually remove the struct (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
When calling debugfs functions, they can now return error values if
something went wrong. If that happens, return a NULL as a *dentry to
the relay core instead of passing it an illegal pointer.
The relay core should be able to handle an illegal pointer, but add this
check to be safe.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131131507.GA19807@kroah.com
First of all GMCH can be considered a feature by itself
since it is a chip present in some platforms that connects
the IA processor to memory and other components in PC.
Also with the introduction of display block at device info,
we got a redundant definition:
.display.has_gmch_display = 1,
So, let's clean up things a bit and use the standardized
way of has_feature on displays side.
No functional change and no manual interaction to generate
this patch.
It is only:
sed -si -e 's/has_gmch_display/has_gmch/g' \
-e 's/HAS_GMCH_DISPLAY/HAS_GMCH/g' drivers/gpu/drm/i915/*{c,h}
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204222538.15842-1-rodrigo.vivi@intel.com
Looking forward, we need to break the struct_mutex dependency on
i915_gem_active. In the meantime, external use of i915_gem_active is
quite beguiling, little do new users suspect that it implies a barrier
as each request it tracks must be ordered wrt the previous one. As one
of many, it can be used to track activity across multiple timelines, a
shared fence, which fits our unordered request submission much better. We
need to steer external users away from the singular, exclusive fence
imposed by i915_gem_active to i915_active instead. As part of that
process, we move i915_gem_active out of i915_request.c into
i915_active.c to start separating the two concepts, and rename it to
i915_active_request (both to tie it to the concept of tracking just one
request, and to give it a longer, less appealing name).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-5-chris@chris-wilson.co.uk
Wrap the active tracking for a GPU references in a slabcache for faster
allocations, and hopefully better fragmentation reduction.
v3: Nothing device specific left, it's just a slabcache that we can
make global.
v4: Include i915_active.h and don't put the initfunc under DEBUG_GEM
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-4-chris@chris-wilson.co.uk
As soon as we detect that the active tracker is idle and we prepare to
call the retire callback, release the storage for our tree of
per-timeline nodes. We expect these to be infrequently used and quick
to allocate, so there is little benefit in keeping the tree cached and
we would prefer to return the pages back to the system in a timely
fashion.
This also means that when we finalize the struct as a whole, we know as
the activity tracker must be idle, the tree has already been released.
Indeed we can reduce i915_active_fini() just to the assertions that there
is nothing to do.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-3-chris@chris-wilson.co.uk
We currently track GPU memory usage inside VMA, such that we never
release memory used by the GPU until after it has finished accessing it.
However, we may want to track other resources aside from VMA, or we may
want to split a VMA into multiple independent regions and track each
separately. For this purpose, generalise our request tracking (akin to
struct reservation_object) so that we can embed it into other objects.
v2: Tweak error handling during selftest setup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-2-chris@chris-wilson.co.uk
Even if we don't have the correct clock and get a warning, we should not
skip the return.
v2: improve commit message (from Joonas)
Fixes: 1fa11ee2d9 ("drm/i915/icl: start adding the TBT pll")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-3-lucas.demarchi@intel.com
(cherry picked from commit 7a61a6dec3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're incorrectly masking off the R/V channel enable bit from
KEYMSK. Fix it up.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: b208152556 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125183846.28755-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 968bf969b4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
instead of relying on intel_iommu_enabled, use the fact that the
dma_map_ops::map_page != dma_direct_map_page.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Previously we set only the dma mask and not the coherent mask. Fix that.
Also, for clarity, make sure both are initially set to 64 bits.
Cc: <stable@vger.kernel.org>
Fixes: 0d00c488f3: ("drm/vmwgfx: Fix the driver for large dma addresses")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
During modeset check it is possible to have all crtc_state's in atomic
state. Check for crtc enable status while checking for display unit
active status. Only error if enabling a crtc while display unit is not
active.
Cc: <stable@vger.kernel.org>
Fixes: 9da6e26c0a: ("drm/vmwgfx: Fix a layout race condition")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
if vmw_execbuf_fence_commands() fails, The handle value will be
uninitialized and a bogus fence handle might be copied to user-space.
Cc: <stable@vger.kernel.org>
Fixes: 2724b2d54c: ("drm/vmwgfx: Use new validation interface for the modesetting code v2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com> #v1
Reviewed-by: Sinclair Yeh <syeh@vmware.com> #v1
Reviewed-by: Deepak Rawat <drawat@vmware.com>
The function was unconditionally returning 0, and a caller would have to
rely on the returned fence pointer being NULL to detect errors. However,
the function vmw_execbuf_copy_fence_user() would expect a non-zero error
code in that case and would BUG otherwise.
So make sure we return a proper non-zero error code if the fence pointer
returned is NULL.
Cc: <stable@vger.kernel.org>
Fixes: ae2a104058: ("vmwgfx: Implement fence objects")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Exercise the context image reconfiguration logic for idle and busy
contexts, with the resets thrown into the mix as well.
Free from the uAPI restrictions this test runs on all Gen9+ platforms
with slice power gating.
v2:
* Rename some helpers for clarity.
* Include subtest names in error logs.
* Remove unnecessary function export.
v3:
* Rebase for RUNTIME_INFO.
v4:
* Fix incomplete unexport from v2. (Chris Wilson)
v5:
* Rebased for runtime pm api changes.
v6:
* Rebased for i915_reset.c.
v7:
* Tidy checkpatch warnings.
* Consolidate error checking and logging a bit.
* Skip idle test phase if something failed before it.
v8:
(Chris Wilson)
* Fix i915_request_wait error handling.
* No need to PIN_HIGH the VMA.
* Remove pointless GEM_BUG_ON before pointer dereference.
v9:
* Avoid rq leak if rpcs query fails. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # v6
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-5-tvrtko.ursulin@linux.intel.com
We want to allow userspace to reconfigure the subslice configuration on a
per context basis.
This is required for the functional requirement of shutting down non-VME
enabled sub-slices on Gen11 parts.
To do so, we expose a context parameter to allow adjustment of the RPCS
register stored within the context image (and currently not accessible via
LRI).
If the context is adjusted before first use or whilst idle, the adjustment
is for "free"; otherwise if the context is active we queue a request to do
so (using the kernel context), following all other activity by that
context, which is also marked as barrier for all following submission
against the same context.
Since the overhead of device re-configuration during context switching can
be significant, especially in multi-context workloads, we limit this new
uAPI to only support the Gen11 VME use case. In this use case either the
device is fully enabled, and exactly one slice and half of the subslices
are enabled.
Example usage:
struct drm_i915_gem_context_param_sseu sseu = { };
struct drm_i915_gem_context_param arg = {
.param = I915_CONTEXT_PARAM_SSEU,
.ctx_id = gem_context_create(fd),
.size = sizeof(sseu),
.value = to_user_pointer(&sseu)
};
/* Query device defaults. */
gem_context_get_param(fd, &arg);
/* Set VME configuration on a 1x6x8 part. */
sseu.slice_mask = 0x1;
sseu.subslice_mask = 0xe0;
gem_context_set_param(fd, &arg);
v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu()
(Lionel)
v3: Add ability to program this per engine (Chris)
v4: Move most get_sseu() into i915_gem_context.c (Lionel)
v5: Validate sseu configuration against the device's capabilities (Lionel)
v6: Change context powergating settings through MI_SDM on kernel context
(Chris)
v7: Synchronize the requests following a powergating setting change using
a global dependency (Chris)
Iterate timelines through dev_priv.gt.active_rings (Tvrtko)
Disable RPCS configuration setting for non capable users
(Lionel/Tvrtko)
v8: s/union intel_sseu/struct intel_sseu/ (Lionel)
s/dev_priv/i915/ (Tvrtko)
Change uapi class/instance fields to u16 (Tvrtko)
Bump mask fields to 64bits (Lionel)
Don't return EPERM when dynamic sseu is disabled (Tvrtko)
v9: Import context image into kernel context's ppgtt only when
reconfiguring powergated slice/subslices (Chris)
Use aliasing ppgtt when needed (Michel)
Tvrtko Ursulin:
v10:
* Update for upstream changes.
* Request submit needs a RPM reference.
* Reject on !FULL_PPGTT for simplicity.
* Pull out get/set param to helpers for readability and less indent.
* Use i915_request_await_dma_fence in add_global_barrier to skip waits
on the same timeline and avoid GEM_BUG_ON.
* No need to explicitly assign a NULL pointer to engine in legacy mode.
* No need to move gen8_make_rpcs up.
* Factored out global barrier as prep patch.
* Allow to only CAP_SYS_ADMIN if !Gen11.
v11:
* Remove engine vfunc in favour of local helper. (Chris Wilson)
* Stop retiring requests before updates since it is not needed
(Chris Wilson)
* Implement direct CPU update path for idle contexts. (Chris Wilson)
* Left side dependency needs only be on the same context timeline.
(Chris Wilson)
* It is sufficient to order the timeline. (Chris Wilson)
* Reject !RCS configuration attempts with -ENODEV for now.
v12:
* Rebase for make_rpcs.
v13:
* Centralize SSEU normalization to make_rpcs.
* Type width checking (uAPI <-> implementation).
* Gen11 restrictions uAPI checks.
* Gen11 subslice count differences handling.
Chris Wilson:
* args->size handling fixes.
* Update context image from GGTT.
* Postpone context image update to pinning.
* Use i915_gem_active_raw instead of last_request_on_engine.
v14:
* Add activity tracker on intel_context to fix the lifetime issues
and simplify the code. (Chris Wilson)
v15:
* Fix context pin leak if no space in ring by simplifying the
context pinning sequence.
v16:
* Rebase for context get/set param locking changes.
* Just -ENODEV on !Gen11. (Joonas)
v17:
* Fix one Gen11 subslice enablement rule.
* Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson)
v18:
* Update commit message. (Joonas)
* Restrict uAPI to VME use case. (Joonas)
v19:
* Rebase.
v20:
* Rebase for ce->active_tracker.
v21:
* Rebase for IS_GEN changes.
v22:
* Reserve uAPI for flags straight away. (Chris Wilson)
v23:
* Rebase for RUNTIME_INFO.
v24:
* Added some headline docs for the uapi usage. (Joonas/Chris)
v25:
* Renamed class/instance to engine_class/engine_instance to avoid clash
with C++ keyword. (Tony Ye)
v26:
* Rebased for runtime pm api changes.
v27:
* Rebased for intel_context_init.
* Wrap commit msg to 75.
v28:
(Chris Wilson)
* Use i915_gem_ggtt.
* Use i915_request_await_dma_fence to show a better example.
v29:
* i915_timeline_set_barrier can now fail. (Chris Wilson)
v30:
* Capture some acks.
v31:
* Drop the WARN_ON from use controllable paths. (Chris Wilson)
* Use overflows_type for all checks.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634
Issue: https://github.com/intel/media-driver/issues/267
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zhipeng Gong <zhipeng.gong@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stéphane Marchesin <marcheu@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
Timeline barrier allows serialization between different timelines.
After calling i915_timeline_set_barrier with a request, all following
submissions on this timeline will be set up as depending on this request,
or barrier. Once the barrier has been completed it automatically gets
cleared and things continue as normal.
This facility will be used by the upcoming context SSEU code.
v2:
* Assert barrier has been retired on timeline_fini. (Chris Wilson)
* Fix mock_timeline.
v3:
* Improved comment language. (Chris Wilson)
v4:
* Maintain ordering with previous barriers set on the timeline.
v5:
* Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-3-tvrtko.ursulin@linux.intel.com
If some of the contexts submitting workloads to the GPU have been
configured to shutdown slices/subslices, we might loose the NOA
configurations written in the NOA muxes.
One possible solution to this problem is to reprogram the NOA muxes
when we switch to a new context. We initially tried this in the
workaround batchbuffer but some concerns where raised about the cost
of reprogramming at every context switch. This solution is also not
without consequences from the userspace point of view. Reprogramming
of the muxes can only happen once the powergating configuration has
changed (which happens after context switch). This means for a window
of time during the recording, counters recorded by the OA unit might
be invalid. This requires userspace dealing with OA reports to discard
the invalid values.
Minimizing the reprogramming could be implemented by tracking of the
last programmed configuration somewhere in GGTT and use MI_PREDICATE
to discard some of the programming commands, but the command streamer
would still have to parse all the MI_LRI instructions in the
workaround batchbuffer.
Another solution, which this change implements, is to simply disregard
the user requested configuration for the period of time when i915/perf
is active.
On most platforms there are no issues with this apart from a performance
penality for some media workloads that benefit from running on a partially
powergated GPU. We already prevent RC6 from affecting the programming so
it doesn't sound completely unreasonable to hold on powergating for the
same reason.
On Icelake however there would a functional problem if the slices not-
containing the VME block were left enabled with a running media workload
which explicitly disabled them. To avoid a GPU hang in this case, on
Icelake we lock the enablement to only slices which contain VME blocks.
Downside is that it means degraded GPU performance when OA is active but
there is no known alternative solution for this.
v2: Leave RPCS programming in intel_lrc.c (Lionel)
v3: Update for s/union intel_sseu/struct intel_sseu/ (Lionel)
More to_intel_context() (Tvrtko)
s/dev_priv/i915/ (Tvrtko)
Tvrtko Ursulin:
v4:
* Rebase for make_rpcs changes.
v5:
* Apply OA restriction from make_rpcs directly.
v6:
* Rebase for context image setup changes.
v7:
* Move stream assignment before metric enable.
v8-9:
* Rebase.
v10:
* Squashed with ICL support patch.
Bspec: 21140
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v9
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-2-tvrtko.ursulin@linux.intel.com
We want to expose the ability to reconfigure the slices, subslice and
eu per context and per engine. To facilitate that, store the current
configuration on the context for each engine, which is initially set
to the device default upon creation.
v2: record sseu configuration per context & engine (Chris)
v3: introduce the i915_gem_context_sseu to store powergating
programming, sseu_dev_info has grown quite a bit (Lionel)
v4: rename i915_gem_sseu into intel_sseu (Chris)
use to_intel_context() (Chris)
v5: More to_intel_context() (Tvrtko)
Switch intel_sseu from union to struct (Tvrtko)
Move context default sseu in existing loop (Chris)
v6: s/intel_sseu_from_device_sseu/intel_device_default_sseu/ (Tvrtko)
Tvrtko Ursulin:
v7:
* Pass intel_sseu by pointer instead of value to make_rpcs.
* Rebase for make_rpcs changes.
v8:
* Rebase for RPCS edit on pin.
v9:
* Rebase for context image setup changes.
v10:
* Rename dev_priv to i915. (Chris Wilson)
v11:
* Rebase.
v12:
* Rebase for IS_GEN changes.
v13:
* Rebase for RUNTIME_INFO.
v14:
* Rebase for intel_context_init.
v15:
* Rebase for drm-tip changes.
v16:
* Moved struct intel_sseu definition to i915_gem_context.h.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-1-tvrtko.ursulin@linux.intel.com
ttm_fbdev_mmap() just doesn't work. It appears to work fine, mmap()
returns success, but any attempt to actually access the mapping causes a
SIGBUS.
We can just use drm_gem_prime_mmap() instead. Almost. We have to copy
over the start offset from the ttm_buffer_object vm_node to the
drm_gem_object vm_node so the offset math in drm_gem_prime_mmap() works
correctly for us even though we use ttm to manage our objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190204183858.8976-1-kraxel@redhat.com
Commit "f4bd542bca drm/fb-helper: Scale back depth to supported maximum"
uncovered a bug in the cirrus driver. It must create its own primary
plane, using the correct format list, depending on the bpp module
parameter, so it is consistent with mode_config->preferred_depth.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190204110131.21467-1-kraxel@redhat.com
Limit the NEWCLIENT boost to only give its small priority boost to fresh
clients only that have no dependencies.
The idea for using NEWCLIENT boosting, commit b16c765122 ("drm/i915:
Priority boost for new clients"), is that short-lived streams are often
interactive and require lower latency -- and that by executing those
ahead of the long running hogs, the short-lived clients do little to
interfere with the system throughput by virtue of their short-lived
nature. However, we were only considering the client's own timeline for
determining whether or not it was a fresh stream. This allowed for
compositors to wake up before their vblank and bump all of its client
streams. However, in testing with media-bench this results in chaining
all cooperating contexts together preventing us from being able to
reorder contexts to reduce bubbles (pipeline stalls), overall increasing
latency, and reducing system throughput. The exact opposite of our
intent. The compromise of applying the NEWCLIENT boost to strictly fresh
clients (that do not wait upon anything else) should maintain the
"real-time response under load" characteristics of FQ_CODEL, without
locking together the long chains of dependencies across the system.
References: b16c765122 ("drm/i915: Priority boost for new clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204150101.30759-1-chris@chris-wilson.co.uk
When first enabling preemption, we hesitated from making it a free-for-all
where every higher priority client would force a preempt-to-idle cycle
and take over from all lower priority clients. We hesitated because we
were uncertain just how well preemption would work in practice, whether
the preemption latency itself would detract from the latency gains for
higher priority tasks and whether it would work at all. Since
introducing preemption, we have been enabling it for more common tasks,
even giving normal clients a small preemptive boost when they first
start (to aide fairness and improve interactivity). Now lets take one
step further and give permission for all normal (priority:0) clients to
preempt any idle (priority:<0) task so that users running long compute
jobs do not overly impact other jobs (i.e. their desktop) and the system
remains responsive under such idle loads.
References: f6322eddaf ("drm/i915/preemption: Allow preemption between submission ports")
References: b16c765122 ("drm/i915: Priority boost for new clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: "Bloomfield, Jon" <jon.bloomfield@intel.com>
Cc: "Stead, Alan" <alan.stead@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204084116.3013-1-chris@chris-wilson.co.uk
When GEM backing storage is allocated those are normal pages,
so there is no point using pgprot_writecombine while mmaping.
This fixes mismatch of buffer pages' memory attributes between
the frontend and backend which may cause screen artifacts.
Fixes: c575b7eeb8 ("drm/xen-front: Add support for Xen PV display frontend")
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129150422.19867-1-andr2000@gmail.com
There is no need to have the 'struct drm_framebuffer *fb' variable
static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1548504338-114487-1-git-send-email-yuehaibing@huawei.com
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcVVKOAAoJEPpiX2QO6xPKzpEH/11faCaucfkejXnR2ff3H/Rc
EQILDB+SFwzKYaxd8pLHXJ7D8stmBGW4i086bic1JFTxIi/MtQv5rfOO87jqu1DU
3FFgCLuovzmheKVMuPxnSwGXn2ZI3RWPoDrH7OGaOtKuNAfoFTL9upZYsmBOyA+8
srraU1zHhhR3pawqqVpGrXCVToKSYQc/mh9Od1v491yoqMEhC6r2JaGiePZQldn9
J99ouBDOHMM1f45UX4+ORNQB951sQhJ4SW8e2bi2jKuc5WNmX3+tGLYdKemq3OYN
vi3a4xwSPkhbGWUSQtT7Cy6e2p43p/k7CwVl1iEESVB7HOqINwmxY/UIxm3ap1s=
=Q8JK
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Make background color and LUT more robust (Matt)
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202082911.GA6615@intel.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXFRb/wAKCRDj7w1vZxhR
xXj2AQDFAkH0/tksJ+T6yrHZXQE7q/6fAWTlrDXLo7Nb1hhfswEA1AyaHmZJA0Ar
u7S+4Gfzs/gisw9Jr4bqQaerEpYJxQA=
=qumD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-02-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201144749.t3abxvguhstu6bcl@flea
When the vblank irq happens, kernel time subsystem executes
`vkms_vblank_simulate`. In parallel or not, it prepares all stuff
necessary to the next vblank with arm, and it must flush these stuff
before the next vblank irq. However, vblank counter is ahead when arm is
executed in parallel with handle vblank.
CPU 0: CPU 1:
| |
atomic_commit_tail is ongoing |
| |
| hrtimer: vkms_vblank_simulate()
| |
| drm_crtc_handle_vblank()
| |
drm_crtc_arm_vblank() |
| |
->get_vblank_timestamp() |
| |
| hrtimer_forward_now()
Then, we should guarantee that the vblank interval time is correct (not
changed) before finish the vblank handle.
Fix the bug including the call to `hrtimer_forward_now()` in the same
lock of `drm_crtc_handle_vblank()` to ensure that the timestamp update
is correct when finish the vblank handle.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e2e4b8f3a5cab7b2dba75bf1930f86b0a4ee08c9.1548856186.git.shayenneluzmoura@gmail.com
kms_flip tests are breaking on vkms when simulate vblank because vblank
event sequence count returns one extra frame after arm vblank event to
make a page flip.
When vblank interrupt happens, userspace processes the vblank event and
issues the next page flip command. Kernel calls queue_work to call
commit_planes and arm the new page flip. The next vblank picks up the
newly armed vblank event and vblank interrupt happens again.
The arm and vblank event are asynchronous, then, on the next vblank, we
receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp
and vblank seqno matches.
Function `get_vblank_timestamp` is reached by 2 ways:
- from `drm_mode_page_flip_ioctl`: driver is doing one atomic
operation to synchronize planes in the same output. There is no
vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1
on vblank count, and the variable in_vblank_irq is false
- from `vkms_vblank_simulate`: since the driver is doing a vblank
simulation, the variable in_vblank_irq is true.
Fix this problem subtracting one vblank period from vblank_time when
`get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`,
i.e., is not a real vblank interrupt, and getting the timestamp and
vblank seqno when it is a real vblank interrupt.
The reason for all this is that get_vblank_timestamp always supplies the
timestamp for the next vblank event. The hrtimer is the vblank
simulator, and it needs the correct previous value to present the next
vblank. Since this is how hw timestamp registers work and what the
vblank core expects.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/171e6e1c239cbca0c3df7183ed8acdfeeace9cf4.1548856186.git.shayenneluzmoura@gmail.com
msm maintains a separate structure to define vblank
work definitions and a list to track events submitted
to the workqueue. We can avoid this redundant list
and its protection mechanism, if we subclass the
work object to encapsulate vblank event parameters.
changes in v2:
- subclass optimization on system wq (Sean Paul)
changes in v3:
- none
changes in v4:
- move flush_workqueue before irq uninstall
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Since there are no clients using these threads,
cleaning it up.
changes in v2:
- switch all the dependent clients to use system wq
before removing the disp_threads (Sean Paul)
changes in v3:
- none
changes in v4:
- none
changes in v5:
- Rebase on latest tip with [1] (Sean Paul)
[1] https://patchwork.freedesktop.org/patch/255105/
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
msm is using msm wq for dispatching commit and vblank
events. Switch idle power collapse feature also to use
msm wq to handle delayed work handlers so that
msm can get rid of redundant display threads.
changes in v2:
- patch introduced in v2
changes in v3:
- none
changes in v4:
- use msm wq for delayed works
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
DPU was using one thread per display to dispatch async commits and
vblank requests. Since clean up already happened in msm to use the
common thread for all the display commits, display threads are only
used to cater vblank requests. Since a single thread is sufficient
to do the job without any performance hits, use msm workqueue
to queue requests. A separate patch is submitted later in this
series to remove the display threads altogether.
changes in v2:
- switch to system wq before removing disp threads (Sean Paul)
changes in v3:
- none
changes in v4:
- use msm wq for vblank events
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
use kthread_destroy_worker to destroy workers and
release their associated kthreads.
changes in v3:
- introduced in the series
changes in v4:
- none
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Correct definition of both formats by swapping red
and blue channels
v3: update commit message
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Remove unused functions and macros from files handling
dpu hardware interrupts.
changes in v2:
Removed clear_interrupt_status (Jordan Crouse)
changes in v3:
Changed commit text
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Remove unused functions from dpu plane interface
and unused variables from dpu plane state structure.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Remove enum dpu_iommu_domain from dpu mdss as its unused.
Remove unnecessary comment for variable which is already
removed.
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Bail out KMS hw init on display initialization failures with
proper error logging.
changes in v3:
- introduced in the series
changes in v4:
- avoid duplicate return on errors (Sean Paul)
- avoid spamming errors on failures (Jordon Crouse)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Fix intf_type description in msm_disp_info to show that
it represents drm encoder mode of the display.
changes in v3:
- introduced in the series
changes in v4:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Devices that make up DPU, i.e. graphics card, request their interrupts
from this "virtual" interrupt chip. The interrupt chip builds upon a GIC
SPI interrupt that raises high when any of the interrupts in the DPU's
irq status register are triggered. From the kernel's perspective this is
a chained irq chip, so requesting a flow handler for the GIC SPI and
then calling generic IRQ handling code from that irq handler is not
completely proper. It's better to convert this to a chained irq so that
the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU
affinity changed, and won't be accounted for with irq stats. Doing this
also silences a recursive lockdep warning because we can specify a
different lock class for the chained interrupts, silencing a warning
that is easy to see with 'threadirqs' on the kernel commandline.
WARNING: inconsistent lock state
4.19.10 #76 Tainted: G W
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes:
0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x244/0x360
_raw_spin_lock+0x64/0xa0
handle_fasteoi_irq+0x54/0x2ec
generic_handle_irq+0x44/0x5c
__handle_domain_irq+0x9c/0x11c
gic_handle_irq+0x208/0x260
el1_irq+0xb4/0x130
arch_cpu_idle+0x178/0x3cc
default_idle_call+0x3c/0x54
do_idle+0x1a8/0x3dc
cpu_startup_entry+0x24/0x28
rest_init+0x240/0x270
start_kernel+0x5a8/0x6bc
irq event stamp: 18
hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0
hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc
softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964
softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
<Interrupt>
lock(&irq_desc_lock_class);
*** DEADLOCK ***
no locks held by irq/40-dpu_mdss/203.
stack backtrace:
CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76
Call trace:
dump_backtrace+0x0/0x2f8
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xcc/0x10c
mark_lock+0xbe0/0xe24
__lock_acquire+0x4cc/0x2708
lock_acquire+0x244/0x360
_raw_spin_lock+0x64/0xa0
handle_level_irq+0x34/0x26c
generic_handle_irq+0x44/0x5c
dpu_mdss_irq+0x64/0xec
irq_forced_thread_fn+0x58/0x9c
irq_thread+0x120/0x1dc
kthread+0x248/0x260
ret_from_fork+0x10/0x18
------------[ cut here ]------------
irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Jayant Shekhar <jshekhar@codeaurora.org>
Cc: Rajesh Yadav <ryadav@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
hw_mdp block is common for displays. No need
to reserve per display.
changes in v2:
- use IS_ERR for error checking (Jordan Crouse)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
struct dpu_hw_blk has hw block type info. Remove duplicate
type tracking in struct dpu_rm_hw_blk.
changes in v2:
- remove redundant type in trace api's (Sean Paul)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Not actively used. Clean up the crtc mixer struct.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Definition was removed already. Clean up header declaration.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Not used. Remove from RM.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
RM was equipped with reservation tracking structure RSVP
to cache HW reservation of displays for certain clients
where atomic_checks (atomic commit with TEST_ONLY) for all
the displays are called before their respective atomic_commits.
Since DPU doesn't support the sequence anymore, clean up
the support from RM. Replace rsvp with the corresponding
encoder id to tag the HW blocks reserved. It prepares DPU
to get rid of RM altogether and track reservations using
private states.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
allow_fb_modifiers needs to be set before drm_universal_plane_init
is called.
Signed-off-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Simplify the initilization of a list of formats
by passing the list in directly instead of copying
it from one structure to another.
Signed-off-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.
On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.
Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
In order to support the HDMI2.0 YUV420 display modes, this patch
adds support for the YUV420 TMDS Clock divided by 2 and the controller
passthrough mode.
YUV420 Synopsys PHY support will need some specific configuration table
to support theses modes.
This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in
the Rockchip Linux 4.4 BSP at [1]
[1] https://github.com/rockchip-linux/kernel/tree/release-4.4
Cc: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-5-git-send-email-narmstrong@baylibre.com
Now we support the TMDS Clock > 3.4GHz and support the SCDC Control
operation in the DW-HDMI Controller, we can enable support for the
HDMI2.0 3840x2160@60/50 RGB444 display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-4-git-send-email-narmstrong@baylibre.com
Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
Scrambling when supported or mandatory.
This patch also adds an helper to setup the control bit to support
the high TMDS Bit Period/TMDS Clock-Period Ratio as required with
TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes.
These changes were based on work done by Huicong Xu <xhc@rock-chips.com>
and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes
on the Rockchip 4.4 BSP kernel at [1]
[1] https://github.com/rockchip-linux/kernel/tree/release-4.4
Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-2-git-send-email-narmstrong@baylibre.com
- move all adjustments into one place
- specify GDS/GWS/OA alignment in basic units of the heaps
- it looks like GDS alignment was 1 instead of 4
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the incorrect external id that kernel reports to user mode
driver. Raven2's rev_id is starts from 0x8, so its external id (0x81) should
start from rev_id + 0x79 (0x81 - 0x8). And Raven's rev_id should be 0x21 while
rev_id == 1.
Reported-by: Crystal Jin <Crystal.Jin@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes doorbell reflection on Vega20.
Change-Id: I0495139d160a9032dff5977289b1eec11c16f781
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The earlier change 'Fix 6x4K displays' led to fclk value
idling at higher DPM level.
[How]
Apply the fix only to respective multi-display configuration.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix ILK-IVB primary plane enable delays (Juha-Pekka)
- Differentiate between gtt->mutex and ppgtt->mutex (Chris)
- Prevent concurrent GGTT update and use on Braswell (Chris)
- Fix CNL macros for DDI vswing (Aditya)
- Fix static code analysis warning (RK)
- Only dump GPU state on set-wedged if interesting (Chris)
- Port F detection improvements (Imre)
- userptr mutex lock fixes (Chris)
- Fix on MST allocation by propagating error value at compute_config (Lyude)
- Serialise concurrent calls to set_wedge (Chris)
- Unify reset functionality into i915_reset.c (Chris)
- Switch to kernel fixed size types (Jani)
- Limit the for_each_set_bit to the valid range (Chris)
- Fix wakeref cooie handling (Tvrtko)
- IRQs handling improvements (Chris)
- Selftests improvements (Chris)
- Remove superfluous PANEL_POWER_OFF macro (Jani)
- Global seqno fix (Chris)
- DSI fixes (Hans)
- Refactor out intel_context_init() (Chris)
- Show all active engines on hangcheck (Chris)
- PSR2 fixes and improvements (Jose)
- Do a posting read after irq install on Ice Lake (Daniele)
- Add few more device IDs for Ice Lake (Rodrigo)
- Mark up priority boost on preemption (Chris)
- Add color management LUT validation helper (Matt)
- Split out intel_crt_present to platform specific setup (Jani)
- LVDS and TV clean up and improvements (Jani)
- Simplify CRT VBT check for per-VLV/DDI (Jani)
- De-inline intel_context_init() (Chris)
- Backlight fixes (Maarten)
- Enable fastset for non-boot modesets (Maarten)
- Make HW readout mark CRTC scaler as in use (Maarten)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcSk7xAAoJEPpiX2QO6xPKDUIH/0gzfkkFehRV76LTKTzdiFr5
4etRp4T7siGBN4E2MuhBrA5OBbzcXTlfjoO0nUZEwhC3HTJ/19eFZ5rjDCC4SuOt
5c4IDynWxyKfZS1gDcBNHeH68fD3Oeek93Wh69DFtze+sml5aPtD5wEDwlOihOpH
G/O5gBxH/91M4EXpF/IFUr6ZhdG4RVrBRV9PCjdo/wyji5zYVfnXFT2V1g2DDrX5
WK54aOlsPsb7lpyQTbf8F/jmxyen3Y3Y+hhWs3KmrE5SmK/0YF59Swj+z7lJgLoP
Y/wF+YJ9JWU1+E3zfz1NX97O4Prv8DHjbNh6tjNUoUAma/D91QYmUrOfuKSJO5Q=
=f3aM
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Track all runtime-PM wakerefs and other rpm improvements (Chris)
- Fix ILK-IVB primary plane enable delays (Juha-Pekka)
- Differentiate between gtt->mutex and ppgtt->mutex (Chris)
- Prevent concurrent GGTT update and use on Braswell (Chris)
- Fix CNL macros for DDI vswing (Aditya)
- Fix static code analysis warning (RK)
- Only dump GPU state on set-wedged if interesting (Chris)
- Port F detection improvements (Imre)
- userptr mutex lock fixes (Chris)
- Fix on MST allocation by propagating error value at compute_config (Lyude)
- Serialise concurrent calls to set_wedge (Chris)
- Unify reset functionality into i915_reset.c (Chris)
- Switch to kernel fixed size types (Jani)
- Limit the for_each_set_bit to the valid range (Chris)
- Fix wakeref cooie handling (Tvrtko)
- IRQs handling improvements (Chris)
- Selftests improvements (Chris)
- Remove superfluous PANEL_POWER_OFF macro (Jani)
- Global seqno fix (Chris)
- DSI fixes (Hans)
- Refactor out intel_context_init() (Chris)
- Show all active engines on hangcheck (Chris)
- PSR2 fixes and improvements (Jose)
- Do a posting read after irq install on Ice Lake (Daniele)
- Add few more device IDs for Ice Lake (Rodrigo)
- Mark up priority boost on preemption (Chris)
- Add color management LUT validation helper (Matt)
- Split out intel_crt_present to platform specific setup (Jani)
- LVDS and TV clean up and improvements (Jani)
- Simplify CRT VBT check for per-VLV/DDI (Jani)
- De-inline intel_context_init() (Chris)
- Backlight fixes (Maarten)
- Enable fastset for non-boot modesets (Maarten)
- Make HW readout mark CRTC scaler as in use (Maarten)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181000.GA5284@intel.com
New stuff for 5.1.
amdgpu:
- DC bandwidth formula updates
- Support for DCC on scanout surfaces
- Support for multiple IH rings on soc15 asics
- Fix xgmi locking
- Add sysfs interface to get pcie usage stats
- Simplify DC i2c/aux code
- Initial support for BACO on vega10/20
- New runtime SMU feature debug interface
- Expand existing sysfs power interfaces to new clock domains
- Handle kexec properly
- Simplify IH programming
- Rework doorbell handling across asics
- Drop old CI DPM implementation
- DC page flipping fixes
- Misc SR-IOV fixes
amdkfd:
- Simplify the interfaces between amdkfd and amdgpu
ttm:
- Add a callback to notify the driver when the lru changes
sched:
- Refactor mirror list handling
- Rework hw fence processing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125231517.26268-1-alexander.deucher@amd.com
While cross checking PCI IDs from Intel Media SDK
and kernel Dmitry noticed this gap. So we checked the
spec and this new ID had been recently added.
v2: Adding new H_GT1 entry to i915_pci.c (Jose)
Reported-by: Dmitry Rogozhkin<dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Rogozhkin<dmitry.v.rogozhkin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201235049.27206-1-rodrigo.vivi@intel.com
We really want to have fastboot enabled by default to avoid an ugly
modeset during boot.
Currently we are enabling fastboot by default on gen9+ (Skylake and newer).
The intention is to enable it on older generations after it has seen more
testing on gen9+.
VLV and CHV devices are still being sold in stores today, as such it is
desirable to also enable fastboot by default on these now.
I've extensively tested fastboot=1 support on over 50 different
Bay- and Cherry-Trail devices. Testing DSI and eDP panels as well as
HDMI output (and even DP over Type-C on one device).
All 50 devices work fine with fastboot=1. On 2 devices their DSI panel
turns black as soon as the i915 driver loads when fastboot=0, so having
fastboot enabled is required for these 2 to work properly (for lack of
a better fix).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129142237.8684-1-hdegoede@redhat.com
Enables blend optimization for floating point RTs
This restores the workaround that was reverted in c358514ba8
("Revert "drm/i915/icl: WaEnableFloatBlendOptimization"").
The revert was due to the register write seemingly not sticking,
but the HW team has confirmed that this is because the
register is WO and that the workaround is indeed required.
Here the wa is added with a mask of 0 since the register is WO.
References: https://hsdes.intel.com/resource/1408134172
References: https://bugs.freedesktop.org/show_bug.cgi?id=107338
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Talha Nassar <talha.nassar@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1548983324-15344-4-git-send-email-talha.nassar@intel.com
Top comment in intel_workarounds.c says common code should come first so
lets respect that. Also, by moving the common code together opportunities
to reduce duplication will become more obvious.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1548983324-15344-2-git-send-email-talha.nassar@intel.com
We can't safely probe Type C ports, whether they are a legacy or a
USB/Thunderbolt DP Alternate Type C port. This would require performing
the TypeC connect sequence - as described by the specification - but
that may have unwanted side-effects. These side-effects include at least
- without completeness - timeouts during AUX power well enabling and
subsequent PLL enabling errors.
To safely identify these ports we really need VBT, which has the proper
flag for this (ddi_vbt_port_info::supports_typec_usb, supports_tbt).
Based on the above disable Type C ports if we can't load VBT for some
reason.
v2:
- Notice that we disable TypeC ports completely and simplify accordingly
(Jose).
- Add code comment explaining why we disabled the ports. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128114242.28666-1-imre.deak@intel.com
commit 5b0bd14dcc ("drm/i915/icl: keep track of unused pll while
looping") inadvertently (I presume) changed the code to pick the
last unused dpll rather than the first unused one like we did before.
While there should most likely be no harm in changing the order
let's change back just to avoid a change in the behaviour. At
least it might reduce the confusion when staring at logs (took
me a while to figure out why DPLL1 being picked over DPLL0
when the latter was most definitely available).
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130181359.20693-1-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
The code managing the dbuf slices is borked and needs some
real work to fix. In the meantime let's just stop using the
second slice.
v2: Drop the change to intel_enabled_dbuf_slices_num() (Mahesh)
Cc: Mahesh Kumar <mahesh1.sh.kumar@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130155110.12918-1-ville.syrjala@linux.intel.com
Reviewed-by: Mahesh Kumar <mahesh1.sh.kumar@gmail.com>
Implement VFIO EDID region for vgpu. Support EDID blob update and notify
guest on link state change via hotplug event.
v3: move struct edid_region to kvmgt.c <zhenyu>
v2: add EDID sanity check and size update <zhenyu>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add function to emulate hotplug interrupt for SKL/KBL platforms
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
These functions will get default resolution according to vgpu type.
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use of the new DRM_COLOR_LUT_NON_DECREASING test was a bit over-zealous;
it doesn't actually need to be applied to the degamma on "bdw-style"
platforms. Likewise, we overlooked the fact that CHV should have that
test applied to the gamma LUT as well as the degamma LUT.
Rather than adding more complicated platform checking to
intel_color_check(), let's just store the appropriate set of LUT
validation flags for each platform in the intel_device_info structure.
v2:
- Shuffle around LUT size tests so that the hardware-specific tests
won't be applied to legacy gamma tables. (Ville)
- Add a debug message so that it will be easier to understand why an
atomic transaction involving incorrectly-sized LUT's got rejected
by the driver.
v3:
- Switch size_t's to int's. (Ville)
Fixes: 85e2d61e49 ("drm/i915: Validate userspace-provided color management LUT's (v4)")
References: https://lists.freedesktop.org/archives/intel-gfx/2019-January/187634.html
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130181022.4291-1-matthew.d.roper@intel.com
We don't yet allow userspace to control the CRTC background color, but
we should manually program the color to black to ensure the BIOS didn't
leave us with some other color. We should also set the pipe gamma and
pipe CSC bits so that the background color goes through the same color
management transformations that a plane with black pixels would.
v2: Rename register to SKL_BOTTOM_COLOR to more closely follow
bspec naming. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130185122.10322-2-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Decode the NAK reply fields to make it easier to parse the logs.
v2: s/STR/DP_STR/ to avoid conflict with some header stuff (0day)
Use drm_dp_mst_req_type_str() more (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-2-ville.syrjala@linux.intel.com
Make the code a bit easier to read by providing symbolic names
for the reply_type (ACK vs. NAK). Also clean up some brace stuff
while at it.
v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK)
Fix some checkpatch issues
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-1-ville.syrjala@linux.intel.com
amdgpu only uses shared-fences internally, but dmabuf importers rely on
implicit write hazard tracking via the reservation_object.fence_excl.
For example, the importer use the write hazard for timing a page flip to
only occur after the exporter has finished flushing its write into the
surface. As such, on exporting a dmabuf, we must either flush all
outstanding fences (for we do not know which are writes and should have
been exclusive) or alternatively create a new exclusive fence that is
the composite of all the existing shared fences, and so will only be
signaled when all earlier fences are signaled (ensuring that we can not
be signaled before the completion of any earlier write).
v2: reservation_object is already locked by amdgpu_bo_reserve()
v3: Replace looping with get_fences_rcu and special case the promotion
of a single shared fence directly to an exclusive fence, bypassing the
fence array.
v4: Drop the fence array ref after assigning to reservation_object
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107341
Testcase: igt/amd_prime/amd-to-i915
References: 8e94a46c17 ("drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Reviewed-by: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yes it's inconsitent with vrr_capable, but this is the actual uapi as
exercise by igt.
Fixes: ab7a664f7a ("drm: Document variable refresh properties")
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-3-daniel.vetter@ffwll.ch
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/savage/savage_state.c:301:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:438:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:559:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:697:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129202005.GA25789@embeddedor
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/via/via_dmablit.c:179:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:185:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:187:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:195:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129201742.GA25660@embeddedor
The > should be >= to avoid an off by one bug.
Fixes: c46c24bb6b ("drm/komeda: Add komeda_framebuffer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The spec doesn't use a definite article in front of SAGV. The
rules regarding articles and initialisms are super fuzzy, but
at least to my ears it sounds much more natural to not have
the article. Perhaps because I tend to pronounce it as
"sag-vee" instead of spelling out the letters one at a time.
Actually I might still prefer to leave out the article if I
did spell them out.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181221171436.8218-8-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On icl+ bspec tells us to calculate a separate minimum ddb
allocation from the blocks watermark. Both have to be checked
against the actual ddb allocation, but since we do things the
other way around we'll just calculat the minimum acceptable
ddb allocation by taking the maximum of the two values.
We'll also replace the memcmp() with a full trawl over the
the watermarks so that it'll ignore the min_ddb_alloc
because we can't directly read that out from the hw. I suppose
we could reconstruct it from the other values, but I was
too lazy to do that now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181221171436.8218-6-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Bspec says we have to reject the watermark if it's >= the ddb
allocation. Fix the code to reject the == case as it should.
For transition watermarks we can just use >=, for the rest
we'll do +1 when calculating the minimum ddb allocation size.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181221171436.8218-5-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
The spec used to say "8bpp" which someone took to mean 8 bytes per
pixel when in fact it was supposed to be 8 bits per pixel. The
spec has been updated to make it more clear now. Fix the code
to match.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181221171436.8218-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
I thought we could remove all the early latency==0 checks
and rely on skl_wm_method{1,2}() checking for it. But
skl_compute_plane_wm() applies a bunch of workarounds to bump
up the latency before calling those guys so clearly it won't
end up doing the right thing. Also not sure if the calculations
based on the method1/2 results are safe agaisnt overflows so
it might not work all that well in any case. Let's put the
early check back.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181221171436.8218-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
On glk+ the level 0 lines watermark actually matters. Do not ignore it.
And while at it let's change things so that we always program a
consistnet 0 to the register when the lines watermarks is ignored
by the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181221171436.8218-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
We should not pass DPLL_ID_ICL_DPLL0 or DPLL_ID_ICL_DPLL1 to this
function because the path is only taken for non-combophy ports. Let the
warning trigger if improper value is given.
While at it, rename the function to match the register name we are
trying to program.
v2: fix typo in comment
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-4-lucas.demarchi@intel.com
Even if we don't have the correct clock and get a warning, we should not
skip the return.
v2: improve commit message (from Joonas)
Fixes: 1fa11ee2d9 ("drm/i915/icl: start adding the TBT pll")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-3-lucas.demarchi@intel.com
Fix the TODO leftover in the code by changing the argument in MG_PLL
macros. The MG_PLL ids used to access the register values can be
converted from tc_port rather than port.
All these registers can use the TC port to calculate the right offsets
because they are only available for TC ports. The range (PORT_C onwards)
may not be stable and change from platform to platform. So by using the
TC id directly we avoid having to check for the platform in the "leaf
functions" and thus passing dev_priv around.
The helper functions were also renamed to use "tc" as prefix to make
them more generic.
v2: Improve commit message and fix checkpatch warning (from Paulo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-2-lucas.demarchi@intel.com
Missed breadcrumb detection is defunct due to the tight coupling with
dma_fence signaling and the myriad ways we may signal fences from
everywhere but from an interrupt, i.e. we frequently signal a fence
before we even see its interrupt. This means that even if we miss an
interrupt for a fence, it still is signaled before our breadcrumb
hangcheck fires, so simplify the breadcrumb hangchecking by moving it
into the GPU hangcheck and forgo fake interrupts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129205230.19056-3-chris@chris-wilson.co.uk
A few years ago, see commit 688e6c7258 ("drm/i915: Slaughter the
thundering i915_wait_request herd"), the issue of handling multiple
clients waiting in parallel was brought to our attention. The
requirement was that every client should be woken immediately upon its
request being signaled, without incurring any cpu overhead.
To handle certain fragility of our hw meant that we could not do a
simple check inside the irq handler (some generations required almost
unbounded delays before we could be sure of seqno coherency) and so
request completion checking required delegation.
Before commit 688e6c7258, the solution was simple. Every client
waiting on a request would be woken on every interrupt and each would do
a heavyweight check to see if their request was complete. Commit
688e6c7258 introduced an rbtree so that only the earliest waiter on
the global timeline would woken, and would wake the next and so on.
(Along with various complications to handle requests being reordered
along the global timeline, and also a requirement for kthread to provide
a delegate for fence signaling that had no process context.)
The global rbtree depends on knowing the execution timeline (and global
seqno). Without knowing that order, we must instead check all contexts
queued to the HW to see which may have advanced. We trim that list by
only checking queued contexts that are being waited on, but still we
keep a list of all active contexts and their active signalers that we
inspect from inside the irq handler. By moving the waiters onto the fence
signal list, we can combine the client wakeup with the dma_fence
signaling (a dramatic reduction in complexity, but does require the HW
being coherent, the seqno must be visible from the cpu before the
interrupt is raised - we keep a timer backup just in case).
Having previously fixed all the issues with irq-seqno serialisation (by
inserting delays onto the GPU after each request instead of random delays
on the CPU after each interrupt), we can rely on the seqno state to
perfom direct wakeups from the interrupt handler. This allows us to
preserve our single context switch behaviour of the current routine,
with the only downside that we lose the RT priority sorting of wakeups.
In general, direct wakeup latency of multiple clients is about the same
(about 10% better in most cases) with a reduction in total CPU time spent
in the waiter (about 20-50% depending on gen). Average herd behaviour is
improved, but at the cost of not delegating wakeups on task_prio.
v2: Capture fence signaling state for error state and add comments to
warm even the most cold of hearts.
v3: Check if the request is still active before busywaiting
v4: Reduce the amount of pointer misdirection with list_for_each_safe
and using a local i915_request variable inside the loops
v5: Add a missing pluralisation to a purely informative selftest message.
References: 688e6c7258 ("drm/i915: Slaughter the thundering i915_wait_request herd")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129205230.19056-2-chris@chris-wilson.co.uk
The global seqno is defunct and so we have no meaningful indicator of
forward progress for an engine. You need to listen to the request
signaling tracepoints instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129205230.19056-1-chris@chris-wilson.co.uk
Let's switch the pipe into interlaced mode and switch off
the TV encoder vertical filter if the pipe vdisplay
matches the TV YSIZE exactly.
While I didn't measure it I presume this might reduce
the power consumption a little bit, and the pixel rate
is halved as the pipe will now fetching in interlaced
mode rather than in progressive mode (effectively the
same difference as between IF-ID vs. PF-ID pfit modes
on more modern hardware) so a bit easier on the memory
bandwidth.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129141913.5515-2-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_tv_mode_to_mode() assumes the pipe will be in progressive
fetch mode, and thus when programming the pipe into interlaced
mode we have to halve the calculated dotclock to get the correct
field duration.
This becomes more important when we start to program the pipe
into interlaced mode on i965gm as we depend on the timestamps
to get accurate frame counter values. Withot halving the clock
our guesstimated frame counter would tick at twice the expected
speed.
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 690157f0a9 ("drm/i915/tv: Fix >1024 modes on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129141913.5515-1-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_color_lut_check() doens't modify the passed in blob so
let's make it const.
Also s/uint32_t/u32/ while at it.
v2: Reduce line wraps (Sam)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129170609.5718-1-ville.syrjala@linux.intel.com
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reduce the repeated node and hive information during XGMI initialization
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kptr is not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sriov need to restrict max_pfn below AMDGPU_GMC_HOLE.
access the hole results in a range fault interrupt IIRC.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After removing unnecessary VM size calculations,
vm_manager.max_pfn would reach 0x10,0000,0000
max_pfn << AMDGPU_GPU_PAGE_SHIFT exceeding AMDGPU_GMC_HOLE_START
would cause GPU reset.
Signed-off-by: wentalou <Wentao.Lou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to avoid preempting ourselves, we currently refuse to schedule
the tasklet if we reschedule an inflight context. However, this glosses
over a few issues such as what happens after a CS completion event and
we then preempt the newly executing context with itself, or if something
else causes a tasklet_schedule triggering the same evaluation to
preempt the active context with itself.
However, when we avoid preempting ELSP[0], we still retain the preemption
value as it may match a second preemption request within the same time period
that we need to resolve after the next CS event. However, since we only
store the maximum preemption priority seen, it may not match the
subsequent event and so we should double check whether or not we
actually do need to trigger a preempt-to-idle by comparing the top
priorities from each queue. Later, this gives us a hook for finer
control over deciding whether the preempt-to-idle is justified.
The sequence of events where we end up preempting for no avail is:
1. Queue requests/contexts A, B
2. Priority boost A; no preemption as it is executing, but keep hint
3. After CS switch, B is less than hint, force preempt-to-idle
4. Resubmit B after idling
v2: We can simplify a bunch of tests based on the knowledge that PI will
ensure that earlier requests along the same context will have the highest
priority.
v3: Demonstrate the stale preemption hint with a selftest
References: a2bf92e8cc ("drm/i915/execlists: Avoid kicking priority on the current context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129185452.20989-4-chris@chris-wilson.co.uk
After noticing that we trigger preemption events for currently executing
requests, as well as requests that complete before the preemption and
attempting to suppress those preemption events, it is wise to not
consider the queue_priority to be authoritative. As we only track the
maximum priority seen between dequeue passes, if the maximum priority
request is no longer available for dequeuing (it completed or is even
executing on another engine), we have no knowledge of the previous
queue_priority as it would require us to keep a full history of enqueued
requests -- but we already have that history in the priolists!
Rename the queue_priority to queue_priority_hint so that we do not
confuse it as being exactly the maximum priority in the queue, but merely
an indication that we have seen a new maximum priority value and as such
we should check whether it should preempt the currently running request.
v2: s/preempt_priority_hint/queue_priority_hint/ as preempt implies it
being only used for the singular task of preemption and not the wider
question of waking up due to a change in the queue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129185452.20989-3-chris@chris-wilson.co.uk
To allow requests to forgo a common execution timeline, one question we
need to be able to answer is "is this request running?". To track
whether a request has started on HW, we can emit a breadcrumb at the
beginning of the request and check its timeline's HWSP to see if the
breadcrumb has advanced past the start of this request. (This is in
contrast to the global timeline where we need only ask if we are on the
global timeline and if the timeline has advanced past the end of the
previous request.)
There is still confusion from a preempted request, which has already
started but relinquished the HW to a high priority request. For the
common case, this discrepancy should be negligible. However, for
identification of hung requests, knowing which one was running at the
time of the hang will be much more important.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129185452.20989-2-chris@chris-wilson.co.uk
In bringup on simulated HW even rudimentary tests are slow, and so many
may fail that we want to be able to filter out the noise to focus on the
specific problem. Even just the tests groups provided for igt is not
specific enough, and we would like to isolate one particular subtest
(and probably subsubtests!). For simplicity, allow the user to provide a
command line parameter such as
i915.st_filter=i915_timeline_mock_selftests/igt_sync
to restrict ourselves to only running on subtest. The exact name to use
is given during a normal run, highlighted as an error if it failed,
debug otherwise. The test group is optional, and then all subtests are
compared for an exact match with the filter (most subtests have unique
names). The filter can be negated, e.g. i915.st_filter=!igt_sync and
then all tests but those that match will be run. More than one match can
be supplied separated by a comma, e.g.
i915.st_filter=igt_vma_create,igt_vma_pin1
to only run those specified, or
i915.st_filter=!igt_vma_create,!igt_vma_pin1
to run all but those named. Mixing a blacklist and whitelist will only
execute those subtests matching the whitelist so long as they are
previously excluded in the blacklist.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129185452.20989-1-chris@chris-wilson.co.uk
Add missing break statement in order to prevent the code from falling
through to the default case.
The resoning for this is that pclk_vol_table is an automatic variable.
So, it makes no sense to update it just before falling through to the
default case and return -EINVAL.
This bug was found thanks to the ongoing efforts to enabling
-Wimplicit-fallthrough.
Fixes: cd70f3d6e3 ("drm/amd/powerplay: PP/DAL interface changes for dynamic clock switch")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if the device is root rather before attempting to see what
speeds the pcie port supports. Fixes a crash with pci passthrough
in a VM.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing power_average to visible check for power
attributes for APUs. Was missed before.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]
Fixes: 7b2e7adea7 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a few __printf attribute specifiers to routines that
could use them.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The bindings for Qualcomm opp levels changed after being Acked but
before landing. Thus the code in the GPU driver that was relying on
the old bindings is now broken.
Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'. See the patch
("dt-bindings: opp: Introduce opp-level bindings").
NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch. This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.
This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Every GPU core only has one interrupt so there isn't any
value in looking up the interrupt by name. Remove the name (which
is legacy anyway) and use platform_get_irq() instead.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When debugfs is disabled, but coredump is turned on, the adreno driver fails to build:
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
.show = adreno_show,
^~~~
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base')
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: error: initialization of 'void (*)(struct msm_gpu *, struct msm_gem_submit *, struct msm_file_private *)' from incompatible pointer type 'void (*)(struct msm_gpu *, struct msm_gpu_state *, struct drm_printer *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base.submit')
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:546:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:769:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_devcoredump_read':
drivers/gpu/drm/msm/msm_gpu.c:289:12: error: 'const struct msm_gpu_funcs' has no member named 'show'
Adjust the #ifdef to make it build again.
Fixes: c0fec7f562 ("drm/msm/gpu: Capture the GPU state on a GPU hang")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Prevents deadlock when fifo is full and reader closes file.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This is only used by drm_irq_install(), which is an optional helper.
For legacy pci devices this is required (due to interrupt sharing without
msi/msi-x), and just making this the default exactly matches the behaviour
of all existing drivers using the drm_irq_install() helpers. In case that
ever becomes wrong drivers can roll their own irq handling, as many
drivers already do (for other reasons like needing a threaded interrupt
handler, or having an entire pile of different interrupt sources).
v2: Rebase
v3: Improve commit message (Emil)
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-3-daniel.vetter@ffwll.ch
Just use a simple if/else chain to select the DMA mode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Since Linux 4.21 we merged the swiotlb ops into the DMA direct ops,
so they would always have a the sync_single methods. But late in
the cicle we also removed the direct ops entirely, so we'd see NULL
DMA ops. Switch vmw_dma_select_mode to only detect swiotlb presence
using swiotlb_nr_tbl() instead.
Fixes: 55897af630 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Fixes: 356da6d0cd ("dma-mapping: bypass indirect calls for dma-direct")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
intel_iommu_enabled is defined as always false for !CONFIG_INTEL_IOMMU,
so remove the ifdefs around it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The driver depends on CONFIG_X86 so these are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Both macros evaluate to 0. At the same time flag is already set to
zero since the struct is kzalloc'd in framebuffer_alloc().
As called by drm_fb_helper_alloc_fbi() in the DRM drivers.
v2: Rebase and improve commit message per Emil's suggestion.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124165831.16427-27-daniel.vetter@ffwll.ch
We really want to have fastboot enabled by default to avoid an ugly
modeset during boot.
Rather then enabling it everywhere, lets start with enabling it on
Skylake and newer.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124130114.3967-1-maarten.lankhorst@linux.intel.com
Now that we pin timelines around use, we have a clearly defined lifetime
and convenient points at which we can track only the active timelines.
This allows us to reduce the list iteration to only consider those
active timelines and not all.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-6-chris@chris-wilson.co.uk
Now that we have allocated ourselves a cacheline to store a breadcrumb,
we can emit a write from the GPU into the timeline's HWSP of the
per-context seqno as we complete each request. This drops the mirroring
of the per-engine HWSP and allows each context to operate independently.
We do not need to unwind the per-context timeline, and so requests are
always consistent with the timeline breadcrumb, greatly simplifying the
completion checks as we no longer need to be concerned about the
global_seqno changing mid check.
One complication though is that we have to be wary that the request may
outlive the HWSP and so avoid touching the potentially danging pointer
after we have retired the fence. We also have to guard our access of the
HWSP with RCU, the release of the obj->mm.pages should already be RCU-safe.
At this point, we are emitting both per-context and global seqno and
still using the single per-engine execution timeline for resolving
interrupts.
v2: s/fake_complete/mark_complete/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-5-chris@chris-wilson.co.uk
If we restrict ourselves to only using a cacheline for each timeline's
HWSP (we could go smaller, but want to avoid needless polluting
cachelines on different engines between different contexts), then we can
suballocate a single 4k page into 64 different timeline HWSP. By
treating each fresh allocation as a slab of 64 entries, we can keep it
around for the next 64 allocation attempts until we need to refresh the
slab cache.
John Harrison noted the issue of fragmentation leading to the same worst
case performance of one page per timeline as before, which can be
mitigated by adopting a freelist.
v2: Keep all partially allocated HWSP on a freelist
This is still without migration, so it is possible for the system to end
up with each timeline in its own page, but we ensure that no new
allocation would needless allocate a fresh page!
v3: Throw a selftest at the allocator to try and catch invalid cacheline
reuse.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-4-chris@chris-wilson.co.uk
Allocate a page for use as a status page by a group of timelines, as we
only need a dword of storage for each (rounded up to the cacheline for
safety) we can pack multiple timelines into the same page. Each timeline
will then be able to track its own HW seqno.
v2: Reuse the common per-engine HWSP for the solitary ringbuffer
timeline, so that we do not have to emit (using per-gen specialised
vfuncs) the breadcrumb into the distinct timeline HWSP and instead can
keep on using the common MI_STORE_DWORD_INDEX. However, to maintain the
sleight-of-hand for the global/per-context seqno switchover, we will
store both temporarily (and so use a custom offset for the shared timeline
HWSP until the switch over).
v3: Keep things simple and allocate a page for each timeline, page
sharing comes next.
v4: I was caught repeating the same MI_STORE_DWORD_IMM over and over
again in selftests.
v5: And caught red handed copying create timeline + check.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-3-chris@chris-wilson.co.uk
Previously we only accommodated having a vma pinned by a small number of
users, with the maximum being pinned for use by the display engine. As
such, we used a small bitfield only large enough to allow the vma to
be pinned twice (for back/front buffers) in each scanout plane. Keeping
the maximum permissible pin_count small allows us to quickly catch a
potential leak. However, as we want to split a 4096B page into 64
different cachelines and pin each cacheline for use by a different
timeline, we will exceed the current maximum permissible vma->pin_count
and so time has come to enlarge it.
Whilst we are here, try to pull together the similar bits:
Address/layout specification:
- bias, mappable, zone_4g: address limit specifiers
- fixed: address override, limits still apply though
- high: not strictly an address limit, but an address direction to search
Search controls:
- nonblock, nonfault, noevict
v2: Rewrite the guideline comment on bit consumption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <john.C.Harrison@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-2-chris@chris-wilson.co.uk
Supplement the per-engine HWSP with a per-timeline HWSP. That is a
per-request pointer through which we can check a local seqno,
abstracting away the presumption of a global seqno. In this first step,
we point each request back into the engine's HWSP so everything
continues to work with the global timeline.
v2: s/i915_request_hwsp/hwsp_seqno/ to emphasis that this is the current
HW value and that we are accessing it via i915_request merely as a
convenience.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-1-chris@chris-wilson.co.uk
It is to solve RDMA performance issue.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds support for the 3.5" LCD panel from LeMaker, sold for use with
BananaPi boards. It comes with a 24-bit RGB888 parallel interface and
requires an active-low DE signal
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-7-contact@paulk.fr
Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI
dual-DSI panel.
v4-resend:
- Thierry noted missing dt-bindings for v4 but forgot that he
already had applied them one kernel release back in
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df
v4:
- address Philipp's comments
- real range for usleep_range and
- poweroff ordering in kingdisplay_panel_prepare
- return value beautification in panel_probe
- update author naming for full name
v3:
- address Thierry's comments
- error handling for init dsi writes in init
- unconditionally remove the panel
- don't use drm_panel_detach
- a bit of variable signednes wiggling
- I did talk to ChromeOS people and the delays really should be as short
as possible, so dropped the 100ms from the delay comments
v2:
- update timing + cmds from chromeos kernel
- new backlight API including switch to devm_of_find_backlight
- fix most of Sean Paul's comments
enable/prepare tracking seems something all panels do
- document origins of the init sequence
- lanes per dsi interface to 4 (two interfaces). Matches how tegra
and pending rockchip dual-dsi handle (dual-)dsi lanes
- spdx header instead of license boilerplate
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030091528.28211-1-heiko@sntech.de
ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.
Currently added support for Techstar TS8550B which is ST7701 based
480x854, 2-lane MIPI DSI LCD panel.
Driver now registering mipi_dsi device, but indeed it can extendable
for RGB if any requirement trigger in future.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-2-jagan@amarulasolutions.com
[Why]
The flip and full structures were allocated but never freed.
[How]
Free them at the end of the function. There's a small behavioral
change here with the function returning early if the allocation fails
but we wouldn't should be doing anything in that case anyway.
Fixes: c00e0cc0fdc0 ("drm/amd/display: Call into DC once per multiplane flip")
Fixes: ea39594e0855 ("drm/amd/display: Perform plane updates only when needed")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enhanced sync need to use vertical_interrupt1.
[How]
Add vertical_interrupt1 source to irq manger,
Implment setup vline interrupt interface.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During any modeset the CRTC stream is removed and a new stream is added.
This new stream doesn't carry over CRC capture state if it was
previously set.
[How]
Re-program the stream for CRC capture. The existing DRM callback can
be re-used here for the most part - the only modification needed is
additional locking now that it's called from within commit tail.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.
When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.
This issue was found running:
igt@kms_plane_multiple@atomic-pipe-b-tiling-none
The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.
[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On current design, driver cannot handle the interrupt for
down reply when link training is processing. The DOWN REQ
send before link training will keep in the pending DOWN REP
state in the queue.
It makes the next DOWN REQ be queued until time out.
[How]
To add a polling sequence before clear payload allocation table
to make sure the pending DOWN REP can be handled.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both functions are obsolete and all calls have been replaced by
ttm_bo_get and ttm_bo_put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
