One more step in the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ibtn3vua76f934t7woyf26w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Continuing the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-z8d14wrw393a0fbvmnk1bqd9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-61rra2wg392rhvdgw421wzpt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-foo95pyyp3bhocbt7yd8qrvq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-69vcr8pubpym90skxhmbwhiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And pick the shortest name: 'struct maps'.
The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.
That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.
First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
v4fmaddps
v4fmaddss
v4fnmaddps
v4fnmaddss
vaesdec
vaesdeclast
vaesenc
vaesenclast
vcvtne2ps2bf16
vcvtneps2bf16
vdpbf16ps
gf2p8affineinvqb
vgf2p8affineinvqb
gf2p8affineqb
vgf2p8affineqb
gf2p8mulb
vgf2p8mulb
vp2intersectd
vp2intersectq
vp4dpwssd
vp4dpwssds
vpclmulqdq
vpcompressb
vpcompressw
vpdpbusd
vpdpbusds
vpdpwssd
vpdpwssds
vpexpandb
vpexpandw
vpopcntb
vpopcntd
vpopcntq
vpopcntw
vpshldd
vpshldq
vpshldvd
vpshldvq
vpshldvw
vpshldw
vpshrdd
vpshrdq
vpshrdvd
vpshrdvq
vpshrdvw
vpshrdw
vpshufbitqmb
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions May
2019 (319433-037).
Committer testing:
$ perf test x86
61: x86 rdpmc : Ok
64: x86 instruction decoder - new instructions : Ok
66: x86 bp modify : Ok
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191125125044.31879-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point those stopped being used, prune them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p2k98mj3ff2uk1z95sbl5r6e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point we may have needed that, not anymore.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hnao13231bsl7xml5wn8h4iu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 39b12f7812 ("perf tools: Make it possible to read object code from vmlinux")
the actual function was removed, but we forgot to remove the prototype,
fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-35yy50cgpcx8cjorluwd5j53@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to have it elsewhere.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8cw846pudpxo0xdkvi9qnvrh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An error may be in place when tracepoint_error is called, use
parse_events__handle_error to avoid a memory leak and to capture the
first and last error. Error detected by LLVM's libFuzzer using the
following event:
$ perf stat -e 'msr/event/,f:e'
event syntax error: 'msr/event/,f:e'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/f/e
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing/'
Initial error:
event syntax error: 'msr/event/,f:e'
\___ no value assigned for term
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191120180925.21787-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a pr_warning message. Fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191121092623.374896-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an error message because Intel BTS does not support AUX area
sampling.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for dumping, queuing and decoding AUX area samples. Decoding
samples is the same as regular decoding, except in the case where there
are no timestamps, in which case buffers are decoded immediately before
the sample event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set up the default number of mmap pages, default sample size and default
psb_period for AUX area sampling. Add documentation also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Default config for a PMU is defined before selected events are parsed.
That allows the user-entered config to override the default config.
However that does not allow for changing the default config based on
other options.
For example, if the user chooses AUX area sampling mode, in the case of
Intel PT, the psb_period needs to be small for sampling, so there is a
need to set the default psb_period to 0 (2 KiB) in that case. However
that should not override a value set by the user. To allow for that,
when using default config, record which bits of config were changed by
the user.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add functions to queue AUX area samples in advance
(auxtrace_queue_data()) or individually (auxtrace_queues__add_sample())
or find out what queue a sample belongs on
(auxtrace_queues__sample_queue()).
auxtrace_queue_data() can also queue snapshot data which keeps snapshots
and samples ordered with respect to each other in case support for that
is desired.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
AUX area samples are not limited in how far back in time the sample
could start. Consequently samples must be queued in advance to allow for
time-ordered processing. To achieve that, add
perf_session__peek_events() that walks and peeks at all the events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for dumping AUX area samples i.e. via the perf script/report
-D (--dump-raw-trace) option.
Committer notes:
Add __maybe_unused to the two args for auxtrace__dump_auxtrace_sample()
for when we don't HAVE_AUXTRACE_SUPPORT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After decoding AUX area samples, the AUX area data is no longer needed
(having been replaced by synthesized events) so cut it out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow individual events to be selected for AUX area sampling, add
aux-sample-size config term. attr.aux_sample_size is updated by
auxtrace_parse_sample_options() so that the existing validation will see
the value. Any event that has a non-zero aux_sample_size will cause AUX
area sampling to be configured, irrespective of the --aux-sample option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'perf record' option '--aux-sample' to request AUX area sampling.
AUX area sampling uses an overwriting buffer much like snapshot mode, so
adjust the AUX buffer mmapping accordingly. To make it easy to queue
samples for decoding, synthesize an ID index.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for parsing and validating AUX area sample options. At
present, the only option is the sample size, but it is also necessary to
ensure that events are in a group with an AUX area event as the leader.
Committer note:
Add missing 'static inline' in front of auxtrace_parse_sample_options()
for when we don't HAVE_AUXTRACE_SUPPORT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evsel__find_pmu() so it can be used without forward
declaration.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Architectures are expected to know if AUX area sampling is supported by
the hardware. Add a function perf_can_aux_sample() which will determine
whether the kernel supports it.
Committer notes:
I reported that this message was taking place on a kernel without the
required bits:
# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses:u).
/bin/dmesg | grep -i perf may provide additional information.
Adrian sent a patch addressing it, with this explanation:
----
perf_can_aux_sample_size() always returned true because it did not pass
the attribute size to sys_perf_event_open, nor correctly check the
return value and errno.
----
After applying it I get, later in the series, when --aux-sample is
added:
# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
AUX area sampling is not supported by kernel
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add kernel AUX area sampling definitions, which brings perf_event.h into
line with the kernel version.
New sample type PERF_SAMPLE_AUX requests a sample of the AUX area
buffer. New perf_event_attr member 'aux_sample_size' specifies the
desired size of the sample.
Also add support for parsing samples containing AUX area data i.e.
PERF_SAMPLE_AUX.
Committer notes:
I squashed the first two patches in this series to avoid breaking
automatic bisection, i.e. after applying only the original first patch
in this series we would have:
# perf test -v parsing
26: Sample parsing :
--- start ---
test child forked, pid 17018
sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
test child finished with -1
---- end ----
Sample parsing: FAILED!
#
With the two paches combined:
# perf test parsing
26: Sample parsing : Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch supports jumping from tui total cycles view to symbol source
view.
For example,
perf record -b ./div
perf report --total-cycles
In total cycles view, we can select one entry and press 'a' or press
ENTER key to jump to symbol source view.
This patch also sets sort_order to NULL in cmd_report() which will use
the default branch sort order. The percent value in new annotate view
will be consistent with the percent in annotate view switched from perf
report (we observed the original percent gap with previous patches).
v2:
---
Fix the 'make NO_SLANG=1' error. (set __maybe_unused to
annotation_opts in block_hists_tui_browse()).
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191118140849.20714-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be nice if we could jump to the assembler/source view (like the
normal perf report) from total cycles view.
This patch moves the block_hists_tui_browse from block-info.c to
ui/browsers/hists.c in order to reuse some browser codes (i.e
do_annotate) for implementing new annotation view.
v2:
---
Fix the 'make NO_SLANG=1' error. (Change 'int block_hists_tui_browse()'
to 'static inline int block_hists_tui_browse()')
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191118140849.20714-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid termination of trace loading in case the last record in the
decompressed buffer partly resides in the following mmaped
PERF_RECORD_COMPRESSED record.
In this case NULL value returned by fetch_mmaped_event() means to
proceed to the next mmaped record then decompress it and load compressed
events.
The issue can be reproduced like this:
$ perf record -z -- some_long_running_workload
$ perf report --stdio -vv
decomp (B): 44519 to 163000
decomp (B): 48119 to 174800
decomp (B): 65527 to 131072
fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data?
Error:
failed to process sample
...
Testing:
71: Zstd perf.data compression/decompression : Ok
$ tools/perf/perf report -vv --stdio
decomp (B): 59593 to 262160
decomp (B): 4438 to 16512
decomp (B): 285 to 880
Looking at the vmlinux_path (8 entries long)
Using vmlinux for symbols
decomp (B): 57474 to 261248
prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data?
decomp (B): 25 to 32
decomp (B): 52 to 120
...
Fixes: 57fc032ad6 ("perf session: Avoid infinite loop when seeing invalid header.size")
Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And take it into account when looking up DSOs when we have the dso_id
fields obtained from somewhere, like from PERF_RECORD_MMAP2 records.
Instances of struct map pointing to the same DSO pathname but with
anything in dso_id different are in fact different DSOs, so better have
different 'struct dso' instances to reflect that. At some point we may
want to get copies of the contents of the different objects if we want
to do correct annotation or other analysis.
With this we get 'struct map' 24 bytes leaner:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u64 pgoff; /* 48 8 */
u64 reloc; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 (*map_ip)(struct map *, u64); /* 64 8 */
u64 (*unmap_ip)(struct map *, u64); /* 72 8 */
struct dso * dso; /* 80 8 */
refcount_t refcnt; /* 88 4 */
u32 flags; /* 92 4 */
/* size: 96, cachelines: 2, members: 13 */
/* sum members: 92, holes: 1, sum holes: 3 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* forced alignments: 1 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-g4hxxmraplo7wfjmk384mfsb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not used anywhere, nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-teqz0eqcw43mnt7i3me44esw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it when doing DSO lookups using dso_ids.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-u2nr1oq03o0i29w2ay9jx03s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of the 4 fields, a step in the direction of moving this to
struct dso.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gp5s1xgxacurmih5d1l94ymy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And this patch highlights where these fields are being used: in the sort
order where it uses it to compare maps and classify samples taking into
account not just the DSO, but those DSO id fields.
I think these should be used to differentiate DSOs with the same name
but different 'struct dso_id' fields, i.e. these fields should move to
'struct dso' and then be used as part of the key when doing lookups for
DSOs, in addition to the DSO name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8v5isitqy0dup47nnwkpc80f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trace a magic number as immediate value if the target variable is not
found at some probe points which is based on one probe event.
This feature is good for the case if you trace a source code line with
some local variables, which is compiled into several instructions and
some of the variables are optimized out on some instructions.
Even if so, with this feature, perf probe trace a magic number instead
of such disappeared variables and fold those probes on one event.
E.g. without this patch:
# perf probe -D "pud_page_vaddr pud"
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+23558082 pud=%ax:x64
p:probe/pud_page_vaddr _text+328373 pud=%r8:x64
p:probe/pud_page_vaddr _text+348448 pud=%bx:x64
p:probe/pud_page_vaddr _text+23816818 pud=%bx:x64
With this patch:
# perf probe -D "pud_page_vaddr pud" | head
spurious_kernel_fault is blacklisted function, skip it.
vmalloc_fault is blacklisted function, skip it.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+149051 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+315926 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23807209 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23557365 pud=%ax:x64
p:probe/pud_page_vaddr _text+314097 pud=%di:x64
p:probe/pud_page_vaddr _text+314015 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+313893 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+324083 pud=\deade12d:x64
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476931.24476.6261475888681844285.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support DW_AT_const_value for variable assignment instead of location.
Note that this requires ftrace supporting immediate value.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support multiprobe event if the event is based on function and lines and
kernel supports it. In this case, perf probe creates the first probe
with an event, and tries to append following probes on that event, since
those probes must be on the same source code line.
Before this patch;
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
#
After this patch (on multiprobe supported kernel)
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18 -aR sleep 1
#
Committer testing:
On a kernel that doesn't support multiprobe events, after this patch:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
# grep append /sys/kernel/debug/tracing/README
be modified by appending '.descending' or '.ascending' to a
can be modified by appending any of the following modifiers
#
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
# perf probe -l
probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c)
probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c)
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Generate event name from function name with line number as
<function>_L<line_number>. Note that this is only for the new event
which is defined by the line number of function (except for line 0).
If there is another event on same line, you have to use
"-f" option. In that case, the new event has "_1" suffix.
e.g.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read_L2 (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read_L2 -aR sleep 1
But if we omit the line number or 0th line, it will
have no suffix.
# perf probe -a kernel_read:0
Added new event:
probe:kernel_read (on kernel_read)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
probe:kernel_read (on kernel_read@linux-5.0.0/fs/read_write.c)
probe:kernel_read_L2 (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406474026.24476.2828897745502059569.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since perf probe -L shows non representive lines, it can be mislead
users where user can put probes. This prevents to show such non
representive lines so that user can understand which lines user can
probe.
# perf probe -L kernel_read
<kernel_read@/build/linux-pvZVvI/linux-5.0.0/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(get_ds());
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
Committer testing:
Before:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
1 {
2 mm_segment_t old_fs;
3 ssize_t result;
5 old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
See the 1, 3, 5 lines? They shouldn't be there, after this patch:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406473064.24476.2913278267727587314.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Verify user given probe line is a representive line (which doesn't share
the address with other lines or the line is the least line among the
lines which shares same address), and if not, it shows what is the
representive line.
Without this fix, user can put a probe on the lines which is not a a
representive line. But since this is not a representive line, perf probe
-l shows a representive line number instead of user given line number.
e.g. (put kernel_read:3, but listed as kernel_read:2)
# perf probe -a kernel_read:3
Added new event:
probe:kernel_read (on kernel_read:3)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
With this fix, perf probe doesn't allow user to put a probe on a
representive line, and tell what is the representive line.
# perf probe -a kernel_read:3
This line is sharing the addrees with other lines.
Please try to probe at kernel_read:2 instead.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406472071.24476.14915451439785001021.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dwarf_getsrc_die() can return the line which is not a statement nor
the least line number among the lines which shares same address.
This can lead perf probe --list shows incorrect line number for probed
address.
To fix this, this introduces cu_getsrc_die() which returns only a
statement line and which is the least line number (we call it the
representive line for an address), and use it in cu_find_lineinfo().
Also, if the given address is the entry address of a real function,
cu_find_lineinfo() returns the function declared line number instead of
the start line number of the function body.
For example, without this change perf probe -l shows incorrect line as
below.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:1@linux-5.0.0/fs/read_write.c)
With this fix, it shows correct line number as below;
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406471067.24476.17463149618465494448.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not dereference 'chain' when it is NULL.
$ perf record -e intel_pt//u -e branch-misses:u uname
$ perf report --itrace=l --branch-history
perf: Segmentation fault
Fixes: e9024d519d ("perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191114142538.4097-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are still lots of lookups by name, even if just when loading
vmlinux, till that code is studied to figure out if its possible to do
away with those map lookup by names, provide a way to sort it using
libc's qsort/bsearch.
Doing it at the first lookup defers the sorting a bit, and as the code
stands now, is never done for user maps, just for the kernel ones.
# perf probe -l
# perf probe -x ~/bin/perf -L __map_groups__find_by_name
<__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
struct map **mapp;
4 if (mg->maps_by_name == NULL &&
5 map__groups__sort_by_name_from_rbtree(mg))
6 return NULL;
8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name);
9 if (mapp)
10 return *mapp;
11 return NULL;
12 }
struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
{
# perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string'
Added new event:
probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string)
You can now use it in all perf tools, such as:
perf record -e probe_perf:found -aR sleep 1
#
# perf probe -x ~/bin/perf -L map_groups__find_by_name
<map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
2 struct maps *maps = &mg->maps;
struct map *map;
5 down_read(&maps->lock);
7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) {
8 map = mg->last_search_by_name;
9 goto out_unlock;
}
/*
* If we have mg->maps_by_name, then the name isn't in the rbtree,
* as mg->maps_by_name mirrors the rbtree when lookups by name are
* made.
*/
16 map = __map_groups__find_by_name(mg, name);
17 if (map || mg->maps_by_name != NULL)
18 goto out_unlock;
/* Fallback to traversing the rbtree... */
21 maps__for_each_entry(maps, map)
22 if (strcmp(map->dso->short_name, name) == 0) {
23 mg->last_search_by_name = map;
24 goto out_unlock;
}
27 map = NULL;
out_unlock:
30 up_read(&maps->lock);
31 return map;
32 }
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, bool vmlinux_allocated)
# perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string'
Added new events:
probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string)
probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string)
You can now use it in all perf tools, such as:
perf record -e probe_perf:fallback_1 -aR sleep 1
#
# perf probe -l
probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string)
probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string)
probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string)
#
# perf stat -e probe_perf:*
Now run 'perf top' in another term and then, after a while, stop 'perf stat':
Furthermore, if we ask for interval printing, we can see that that is done just
at the start of the workload:
# perf stat -I1000 -e probe_perf:*
# time counts unit events
1.000319513 0 probe_perf:found
1.000319513 0 probe_perf:fallback_1
1.000319513 0 probe_perf:fallback
2.001868092 23,251 probe_perf:found
2.001868092 0 probe_perf:fallback_1
2.001868092 0 probe_perf:fallback
3.002901597 0 probe_perf:found
3.002901597 0 probe_perf:fallback_1
3.002901597 0 probe_perf:fallback
4.003358591 0 probe_perf:found
4.003358591 0 probe_perf:fallback_1
4.003358591 0 probe_perf:fallback
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'only populating maps for kernel modules either from perf.data file
PERF_RECORD_MMAP records or when parsing /proc/modules, so there is no
need to first look if we already have those module maps in the list,
that would mean the kernel has duplicate entries.
So ditch one use of looking up maps by name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gnzjg2hhuz6jnrw91m35059y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
