Reconnecting after server or network failure can be improved
(to maintain availability and protect data integrity) by allowing
the client to choose the default persistent (or resilient)
handle timeout in some use cases. Today we default to 0 which lets
the server pick the default timeout (usually 120 seconds) but this
can be problematic for some workloads. Add the new mount parameter
to cifs.ko for SMB3 mounts "handletimeout" which enables the user
to override the default handle timeout for persistent (mount
option "persistenthandles") or resilient handles (mount option
"resilienthandles"). Maximum allowed is 16 minutes (960000 ms).
Units for the timeout are expressed in milliseconds. See
section 2.2.14.2.12 and 2.2.31.3 of the MS-SMB2 protocol
specification for more information.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Detected by CoverityScan CID#1438719 ("Unused Value")
buf is reset again before being used so these two lines of code
are useless.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Every time after a session reconnect we don't need to account for
credits obtained in previous sessions. Introduce new struct cifs_credits
which contains both credits value and reconnect instance of the
time those credits were taken. Modify a routine that add credits
back to handle the reconnect instance by assuming zero credits
if the reconnect happened after the credits were obtained and
before we decided to add them back due to some errors during sending.
This patch fixes the MTU credits cases. The subsequent patch
will handle non-MTU ones.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we set reconnect instance to zero on the first
connection but this is not convenient because we need to
reserve some special value for credit handling on reconnects
which is coming in subsequent patches. Fix this by starting
with one when initiating a new TCP connection.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Even if a response is malformed, we should count credits
granted by the server to avoid miscalculations and unnecessary
reconnects due to client or server bugs. If the response has
been received partially, the session will be reconnected anyway
on the next iteration of the demultiplex thread, so counting
credits for such cases shouldn't break things.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We negotiate rsize mounts (and it can be overridden by user) to
typically 4MB, so using larger default I/O sizes from userspace
(changing to 1MB default i/o size returned by stat) the
performance is much better (and not just for long latency
network connections) in most use cases for SMB3 than the default I/O
size (which ends up being 128K for cp and can be even smaller for cp).
This can be 4x slower or worse depending on network latency.
By changing inode->blocksize from 32K (which was perhaps ok
for very old SMB1/CIFS) to a larger value, 1MB (but still less than
max size negotiated with the server which is 4MB, in order to minimize
risk) it significantly increases performance for the
noncached case, and slightly increases it for the cached case.
This can be changed by the user on mount (specifying bsize=
values from 16K to 16MB) to tune better for performance
for applications that depend on blocksize.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
We should add any credits granted to us from unmatched server responses.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
a trivial patch that replaces all use of snprintf with scnprintf.
scnprintf() is generally seen as a safer function to use than
snprintf for many use cases.
In our case, there is no actual difference between the two since we never
look at the return value. Thus we did not have any of the bugs that
scnprintf protects against and the patch does nothing.
However, for people reading our code it will be a receipt that we
have done our due dilligence and checked our code for this type of bugs.
See the presentation "Making C Less Dangerous In The Linux Kernel"
at this years LCA
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a NULL pointer dereference of devname in strspn()
The oops looks something like:
CIFS: Attempting to mount (null)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:strspn+0x0/0x50
...
Call Trace:
? cifs_parse_mount_options+0x222/0x1710 [cifs]
? cifs_get_volume_info+0x2f/0x80 [cifs]
cifs_setup_volume_info+0x20/0x190 [cifs]
cifs_get_volume_info+0x50/0x80 [cifs]
cifs_smb3_do_mount+0x59/0x630 [cifs]
? ida_alloc_range+0x34b/0x3d0
cifs_do_mount+0x11/0x20 [cifs]
mount_fs+0x52/0x170
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on devname in cifs_parse_devname()
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
When executing add_credits() we currently call cifs_reconnect()
if the number of credits is zero and there are no requests in
flight. In this case we may call cifs_reconnect() recursively
twice and cause memory corruption given the following sequence
of functions:
mid1.callback() -> add_credits() -> cifs_reconnect() ->
-> mid2.callback() -> add_credits() -> cifs_reconnect().
Fix this by avoiding to call cifs_reconnect() in add_credits()
and checking for zero credits in the demultiplex thread.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This debug message was never shown because it was checking for NULL
returns but extract_hostname() returns error pointers.
Fixes: 93d5cb517d ("cifs: Add support for failover in cifs_reconnect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
When DFS is not used on the mount we should not be mentioning
DFS in the warning message on reconnect (it could be confusing).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
In case a hostname resolves to a different IP address (e.g. long
running mounts), make sure to resolve it every time prior to calling
generic_ip_connect() in reconnect.
Suggested-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix potential NULL ptr deref when DFS target list is empty.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Start the DFS cache refresh worker per volume during cifs mount.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
A spin lock is held before kstrndup, it may sleep with holding
the spinlock, so we should use GFP_ATOMIC instead.
Fixes: e58c31d5e387 ("cifs: Add support for failover in cifs_reconnect()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
After failing to reconnect to original target, it will retry any
target available from DFS cache.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch adds support for failover when failing to connect in
cifs_mount().
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch will make use of DFS cache routines where appropriate and
do not always request a new referral from server.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Add new dfs_cache.[ch] files
* Add new /proc/fs/cifs/dfscache file
- dump current cache when read
- clear current cache when writing "0" to it
* Add delayed_work to periodically refresh cache entries
The new interface will be used for caching DFS referrals, as well as
supporting client target failover.
The DFS cache is a hashtable that maps UNC paths to cache entries.
A cache entry contains:
- the UNC path it is mapped on
- how much the the UNC path the entry consumes
- flags
- a Time-To-Live after which the entry expires
- a list of possible targets (linked lists of UNC paths)
- a "hint target" pointing the last known working target or the first
target if none were tried. This hint lets cifs.ko remember and try
working targets first.
* Looking for an entry in the cache is done with dfs_cache_find()
- if no valid entries are found, a DFS query is made, stored in the
cache and returned
- the full target list can be copied and returned to avoid race
conditions and looped on with the help with the
dfs_cache_tgt_iterator
* Updating the target hint to the next target is done with
dfs_cache_update_tgthint()
These functions have a dfs_cache_noreq_XXX() version that doesn't
fetches referrals if no entries are found. These versions don't
require the tcp/ses/tcon/cifs_sb parameters as a result.
Expired entries cannot be used and since they have a pretty short TTL
[1] in order for them to be useful for failover the DFS cache adds a
delayed work called periodically to keep them fresh.
Since we might not have available connections to issue the referral
request when refreshing we need to store volume_info structs with
credentials and other needed info to be able to connect to the right
server.
1: Windows defaults: 5mn for domain-based referrals, 30mn for regular
links
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Different servers have different set of file ids.
After failover, unique IDs will be different so we can't validate
them.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
When extracting hostname from UNC, check for leading backslashes
before trying to remove them.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Split and refactor the very large function cifs_mount() in multiple
functions:
- tcp, ses and tcon setup to mount_get_conns()
- tcp, ses and tcon cleanup in mount_put_conns()
- tcon tlink setup to mount_setup_tlink()
- remote path checking to is_path_remote()
* Implement 2 version of cifs_mount() for DFS-enabled builds and
non-DFS-enabled builds (CONFIG_CIFS_DFS_UPCALL).
In preparation for DFS failover support.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
To avoid the warning:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steve French <stfrench@microsoft.com>
Technically 3.02 is not the dialect name although that is more familiar to
many, so we should also accept the official dialect name (3.0.2 vs. 3.02)
in vers=
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
In network file system it is fairly easy for server and client
atime vs. mtime to get confused (and atime updated less frequently)
which we noticed broke some apps which expect atime >= mtime
Also ignore relatime mount option (rather than error on it) since
relatime is basically what some network server fs are doing
(relatime).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
As we reset credits later in the reconnect path, useful
to have optional (cifsFYI) debug message.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
tcon->Flags is only used by SMB1 code and changing it is not permanent
(you lose the setting on tcon reconnect).
* Move the setting to superblock flags (per mount-points).
* Make automount callback exit early when flag present
* Make dfs resolving happening in mount syscall exit early if flag present
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Each time we reconnect to the same server, bump an instance
counter (and display in /proc/fs/cifs/DebugData) to make it
easier to debug.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes problem (discovered by Aurelien) introduced by recent commit:
commit b24df3e30c
("cifs: update receive_encrypted_standard to handle compounded responses")
which broke the ability to respond to some lease breaks
(lease breaks being ignored is a problem since can block
server response for duration of the lease break timeout).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
cifs_delete_mid() is called once we are finished handling a mid and we
expect no more work done on this mid.
Needed to fix recent commit:
commit 730928c8f4
("cifs: update smb2_queryfs() to use compounding")
Add a warning if someone tries to dequeue a mid that has already been
flagged to be deleted.
Also change list_del() to list_del_init() so that if we have similar bugs
resurface in the future we will not oops.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This patch is required allows access to a Microsoft fileserver failover
cluster behind a 1:1 NAT firewall.
The change also provides stronger context for authentication and share
connection (see MS-SMB2 3.3.5.7 and MS-SRVS 3.1.6.8) as noted by
Tom Talpey, and addresses comments about the buffer size for the UNC
made by Aurélien Aptel.
Signed-off-by: Thomas Werschlein <thomas.werschlein@geo.uzh.ch>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Tom Talpey <ttalpey@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add tracepoints for reconnecting an smb3 session
Example output (from trace-cmd) with the patch
(showing the session marked for reconnect, the stat failing, and then
the subsequent SMB3 commands after the server comes back up).
The "smb3_reconnect" event is the new one.
cifsd-25993 [000] .... 29635.368265: smb3_reconnect: server=localhost current_mid=0x1e
stat-26200 [001] .... 29638.516403: smb3_enter: cifs_revalidate_dentry_attr: xid=22
stat-26200 [001] .... 29648.723296: smb3_exit_err: cifs_revalidate_dentry_attr: xid=22 rc=-112
kworker/0:1-22830 [000] .... 29653.850947: smb3_cmd_done: sid=0x0 tid=0x0 cmd=0 mid=0
kworker/0:1-22830 [000] .... 29653.851191: smb3_cmd_err: sid=0x8ae4683c tid=0x0 cmd=1 mid=1 status=0xc0000016 rc=-5
kworker/0:1-22830 [000] .... 29653.855254: smb3_cmd_done: sid=0x8ae4683c tid=0x0 cmd=1 mid=2
kworker/0:1-22830 [000] .... 29653.855482: smb3_cmd_done: sid=0x8ae4683c tid=0x8084f30d cmd=3 mid=3
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
We really, really want to be encouraging use of secure dialects,
and SMB3.1.1 offers useful security features, and will soon
be the recommended dialect for many use cases. Simplify the code
by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable
it in the build, and create compatibility and/or security issues
with modern servers - many of which have been supporting this
dialect for multiple years.
Also clarify some of the Kconfig text for cifs.ko about
SMB3.1.1 and current supported features in the module.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
allow disabling cifs (SMB1 ie vers=1.0) and vers=2.0 in the
config for the build of cifs.ko if want to always prevent mounting
with these less secure dialects.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
If user specifies "posix" on an SMB3.11 mount, then fail the mount
if server does not return the POSIX negotiate context indicating
support for posix.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
if mounting as smb3 do not allow cifs (vers=1.0) or insecure vers=2.0
mounts.
For example:
root@smf-Thinkpad-P51:~/cifs-2.6# mount -t smb3 //127.0.0.1/scratch /mnt -o username=testuser,password=Testpass1
root@smf-Thinkpad-P51:~/cifs-2.6# umount /mnt
root@smf-Thinkpad-P51:~/cifs-2.6# mount -t smb3 //127.0.0.1/scratch /mnt -o username=testuser,password=Testpass1,vers=1.0
mount: /mnt: wrong fs type, bad option, bad superblock on //127.0.0.1/scratch ...
root@smf-Thinkpad-P51:~/cifs-2.6# dmesg | grep smb3
[ 4302.200122] CIFS VFS: vers=1.0 (cifs) not permitted when mounting with smb3
root@smf-Thinkpad-P51:~/cifs-2.6# mount -t smb3 //127.0.0.1/scratch /mnt -o username=testuser,password=Testpass1,vers=3.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Sachin Prabhu <sprabhu@redhat.com>
cifs->master_tlink is NULL against Win Server 2016 (which is
strange.. not sure why) and is dereferenced in cifs_sb_master_tcon().
move master_tlink getter to cifsglob.h so it can be used from
smb2misc.c
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
With offset defined in rdata, transport functions need to look at this
offset when reading data into the correct places in pages.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Separate out all the 4 byte rfc1002 headers so that they are no longer
part of the SMB2 header structures to prepare for future work to add
compounding support.
Update the smb3 transform header processing that we no longer have
a rfc1002 header at the start of this structure.
Update smb2_readv_callback to accommodate that the first iovector in the
response is no the smb2 header and no longer a rfc1002 header.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If "posix" (or synonym "unix" for backward compatibility) specified on mount,
and server advertises support for SMB3.11 POSIX negotiate context, then
enable the new posix extensions on the tcon. This can be viewed by
looking for "posix" in the mount options displayed by /proc/mounts
for that mount (ie if posix extensions allowed by server and the
experimental POSIX extensions also requested on the mount by specifying
"posix" at mount time).
Also add check to warn user if conflicting unix/nounix or posix/noposix specified
on mount.
Signed-off-by: Steve French <smfrench@gmail.com>
To improve security it may be helpful to have additional ways to restrict the
ability to override the default dialects (SMB2.1, SMB3 and SMB3.02) on mount
with old dialects (CIFS/SMB1 and SMB2) since vers=1.0 (CIFS/SMB1) and vers=2.0
are weaker and less secure.
Add a module parameter "disable_legacy_dialects"
(/sys/module/cifs/parameters/disable_legacy_dialects) which can be set to
1 (or equivalently Y) to forbid use of vers=1.0 or vers=2.0 on mount.
Also cleans up a few build warnings about globals for various module parms.
Signed-off-by: Steve French <smfrench@gmail.com>
Previous patches "cifs: update calc_size to take a server argument"
and
"cifs: add server argument to the dump_detail method"
were broken if CONFIG_CIFS_DEBUG2 enabled
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>
In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs. This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).
Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Now signing is supported with RDMA transport.
Remove the code that disabled it.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Temporarily disable AES-GCM, as AES-CCM is only currently
enabled mechanism on client side. This fixes SMB3.11
encrypted mounts to Windows.
Also the tree connect request itself should be encrypted if
requested encryption ("seal" on mount), in addition we should be
enabling encryption in 3.11 based on whether we got any valid
encryption ciphers back in negprot (the corresponding session flag is
not set as it is in 3.0 and 3.02)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
and get rid of some more calls to get_rfc1002_length()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
and get rid of some get_rfc1002_length() in smb2
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This variable is set to 4 for all protocol versions and replaces
the hardcoded constant 4 throughought the code.
This will later be updated to reflect whether a response packet
has a 4 byte length preamble or not once we start removing this
field from the SMB2+ dialects.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Change the following message (which can occur on reconnect) from
a warning to an FYI message. It is confusing to users.
[58360.523634] CIFS VFS: Free previous auth_key.response = 00000000a91cdc84
By default this message won't show up on reconnect unless the user bumps
up the log level to include FYI messages.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
also replaces memset()+kfree() by kzfree().
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: <stable@vger.kernel.org>
* Remove ses->ipc_tid.
* Make IPC$ regular tcon.
* Add a direct pointer to it in ses->tcon_ipc.
* Distinguish PIPE tcon from IPC tcon by adding a tcon->pipe flag. All
IPC tcons are pipes but not all pipes are IPC.
* All TreeConnect functions now cannot take a NULL tcon object.
The IPC tcon has the same lifetime as the session it belongs to. It is
created when the session is created and destroyed when the session is
destroyed.
Since no mounts directly refer to the IPC tcon, its refcount should
always be set to initialisation value (1). Thus we make sure
cifs_put_tcon() skips it.
If the mount request resulting in a new session being created requires
encryption, try to require it too for IPC.
* set SERVER_NAME_LENGTH to serverName actual size
The maximum length of an ipv6 string representation is defined in
INET6_ADDRSTRLEN as 45+1 for null but lets keep what we know works.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Node is assigned twice to rb_first(root), first during declaration
time and second after a taking a spin lock, so we have a duplicated
assignment. Remove the first assignment because it is redundant and
also not protected by the spin lock.
Cleans up clang warning:
fs/cifs/connect.c:4435:18: warning: Value stored to 'node' during
its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Currently the CIFS SMB Direct implementation (experimental) doesn't properly
support signing. Disable it when SMB Direct is in use for transport.
Signing will be enabled in future after it is implemented.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
With SMB Direct connected, use it for receiving data via RDMA receive.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When upper layer wants to umount, make it call shutdown on transport when
SMB Direct is used.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Do a reconnect on SMB Direct when it is used as the connection. Reconnect can
happen for many reasons and it's mostly the decision of SMB2 upper layer.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When "rdma" is specified in the mount option, make CIFS connect to
SMB Direct.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add "rdma" to CIFS mount options to connect to SMB Direct.
Add checks to validate this is used on SMB 3.X dialects.
To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
At the time of this patch, 3.x can be 3.0, 3.02 or 3.1.1.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
There is a race that cause cifs reconnect in cifs_mount,
- cifs_mount
- cifs_get_tcp_session
- [ start thread cifs_demultiplex_thread
- cifs_read_from_socket: -ECONNABORTED
- DELAY_WORK smb2_reconnect_server ]
- cifs_setup_session
- [ smb2_reconnect_server ]
auth_key.response was allocated in cifs_setup_session, and
will release when the session destoried. So when session re-
connect, auth_key.response should be check and released.
Tested with my system:
CIFS VFS: Free previous auth_key.response = ffff8800320bbf80
A simple auth_key.response allocation call trace:
- cifs_setup_session
- SMB2_sess_setup
- SMB2_sess_auth_rawntlmssp_authenticate
- build_ntlmssp_auth_blob
- setup_ntlmv2_rsp
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
With the need to discourage use of less secure dialect, SMB1 (CIFS),
we temporarily upgraded the dialect to SMB3 in 4.13, but since there
are various servers which only support SMB2.1 (2.1 is more secure
than CIFS/SMB1) but not optimal for a default dialect - add support
for multidialect negotiation. cifs.ko will now request SMB2.1
or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will
pick the latest most secure one it can support.
In addition since we are sending multidialect negotiate, add
support for secure negotiate to validate that a man in the
middle didn't downgrade us.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.13+
Some servers seem to accept connections while booting but never send
the SMBNegotiate response neither close the connection, causing all
processes accessing the share hang on uninterruptible sleep state.
This happens when the cifs_demultiplex_thread detects the server is
unresponsive so releases the socket and start trying to reconnect.
At some point, the faulty server will accept the socket and the TCP
status will be set to NeedNegotiate. The first issued command accessing
the share will start the negotiation (pid 5828 below), but the response
will never arrive so other commands will be blocked waiting on the mutex
(pid 55352).
This patch checks for unresponsive servers also on the negotiate stage
releasing the socket and reconnecting if the response is not received
and checking again the tcp state when the mutex is acquired.
PID: 55352 TASK: ffff880fd6cc02c0 CPU: 0 COMMAND: "ls"
#0 [ffff880fd9add9f0] schedule at ffffffff81467eb9
#1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0
#2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a
#3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs]
#4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs]
#5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs]
....
Which is waiting a mutex owned by:
PID: 5828 TASK: ffff880fcc55e400 CPU: 0 COMMAND: "xxxx"
#0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9
#1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs]
#2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs]
#3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs]
#4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs]
#5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs]
#6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs]
#7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs]
....
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurélien Aptel <aaptel@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When mounting to older servers, such as Windows XP (or even Windows 7),
the limited error messages that can be passed back to user space can
get confusing since the default dialect has changed from SMB1 (CIFS) to
more secure SMB3 dialect. Log additional information when the user chooses
to use the default dialects and when the server does not support the
dialect requested.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Due to recent publicity about security vulnerabilities in the
much older CIFS dialect, move the default dialect to the
widely accepted (and quite secure) SMB3.0 dialect from the
old default of the CIFS dialect.
We do not want to be encouraging use of less secure dialects,
and both Microsoft and CERT now strongly recommend not using the
older CIFS dialect (SMB Security Best Practices
"recommends disabling SMBv1").
SMB3 is both secure and widely available: in Windows 8 and later,
Samba and Macs.
Users can still choose to explicitly mount with the less secure
dialect (for old servers) by choosing "vers=1.0" on the cifs
mount
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they
must always be on now.
For various security reasons, SMB3 and later are STRONGLY preferred
over CIFS and older dialects, and SMB3 (and later) will now be
the default dialects so we do not want to allow them to be
ifdeffed out.
In the longer term, we may be able to make older CIFS support
disableable in Kconfig with a new set of #ifdef, but we always
want SMB3 and later support enabled.
Signed-off-by: Steven French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
According to the MS-SMB2 spec (3.2.5.1.6) once the client receives
STATUS_NETWORK_SESSION_EXPIRED error code from a server it should
reconnect the current SMB session. Currently the client doesn't do
that. This can result in subsequent client requests failing by
the server. The patch adds an additional logic to the demultiplex
thread to identify expired sessions and reconnect them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull cifs fixes from Steve French:
"Various fixes for stable for CIFS/SMB3 especially for better
interoperability for SMB3 to Macs.
It also includes Pavel's improvements to SMB3 async i/o support
(which is much faster now)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: add misssing SFM mapping for doublequote
SMB3: Work around mount failure when using SMB3 dialect to Macs
cifs: fix CIFS_IOC_GET_MNT_INFO oops
CIFS: fix mapping of SFM_SPACE and SFM_PERIOD
CIFS: fix oplock break deadlocks
cifs: fix CIFS_ENUMERATE_SNAPSHOTS oops
cifs: fix leak in FSCTL_ENUM_SNAPS response handling
Set unicode flag on cifs echo request to avoid Mac error
CIFS: Add asynchronous write support through kernel AIO
CIFS: Add asynchronous read support through kernel AIO
CIFS: Add asynchronous context to support kernel AIO
cifs: fix IPv6 link local, with scope id, address parsing
cifs: small underflow in cnvrtDosUnixTm()
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
When the IP address is gotten from the UNC, use only the address part
of the UNC. Else all after the percent sign in an IPv6 link local
address is interpreted as a scope id. This includes the slash and
share name. A scope id is expected to be an integer and any trailing
characters makes the conversion to integer fail.
Example of mount command that fails:
mount -i -t cifs //fe80::6a05:caff:fe3e:8ffc%2/test /mnt/t -o sec=none
Signed-off-by: Daniel N Pettersson <danielnp@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull CIFS fixes from Steve French:
"Three cifs/smb3 fixes - including two for stable"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: don't check for failure from mempool_alloc()
Do not return number of bytes written for ioctl CIFS_IOC_COPYCHUNK_FILE
Fix match_prepath()
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
Incorrect return value for shares not using the prefix path means that
we will never match superblocks for these shares.
Fixes: commit c1d8b24d18 ("Compare prepaths when comparing superblocks")
Cc: stable@vger.kernel.org
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Allocate struct backing_dev_info separately instead of embedding it
inside superblock. This unifies handling of bdi among users.
CC: Steve French <sfrench@samba.org>
CC: linux-cifs@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Conflicts were simply overlapping changes. In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.
In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1a967d6c9b ("correctly to
anonymous authentication for the NTLM(v2) authentication") introduces
a regression in handling errors related to attempting a guest
connection to a Windows share which requires authentication. This
should result in a permission denied error but actually causes the
kernel module to enter a never-ending loop trying to follow a DFS
referal which doesn't exist.
The base cause of this is the failure now occurs later in the process
during tree connect and not at the session setup setup and all errors
in tree connect are interpreted as needing to follow the DFS paths
which isn't in this case correct. So, check the returned error against
EACCES and fail if this is returned error.
Feedback from Aurelien:
PS> net user guest /activate:no
PS> mkdir C:\guestshare
PS> icacls C:\guestshare /grant 'Everyone:(OI)(CI)F'
PS> new-smbshare -name guestshare -path C:\guestshare -fullaccess Everyone
I've tested v3.10, v4.4, master, master+your patch using default options
(empty or no user "NU") and user=abc (U).
NT_LOGON_FAILURE in session setup: LF
This is what you seem to have in 3.10.
NT_ACCESS_DENIED in tree connect to the share: AD
This is what you get before your infinite loop.
| NU U
--------------------------------
3.10 | LF LF
4.4 | LF LF
master | AD LF
master+patch | AD LF
No infinite DFS loop :(
All these issues result in mount failing very fast with permission denied.
I guess it could be from either the Windows version or the share/folder
ACL. A deeper analysis of the packets might reveal more.
In any case I did not notice any issues for on a basic DFS setup with
the patch so I don't think it introduced any regressions, which is
probably all that matters. It still bothers me a little I couldn't hit
the bug.
I've included kernel output w/ debugging output and network capture of
my tests if anyone want to have a look at it. (master+patch = ml-guestfix).
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.
The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.
For this patch, the check is only done in SendReceive2()
RH-bz: 1403319
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
There is an include loop between netdevice.h, dsa.h, devlink.h because
of NETDEV_ALIGN, making it impossible to use devlink structures in
dsa.h.
Break this loop by taking dsa.h out of netdevice.h, add a forward
declaration of dsa_switch_tree and netdev_set_default_ethtool_ops()
function, which is what netdevice.h requires.
No longer having dsa.h in netdevice.h means the includes in dsa.h no
longer get included. This breaks a few other files which depend on
these includes. Add these directly in the affected file.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SMB3 fixes from Steve French:
"Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global
namespace) which previously was only enabled for CIFS"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
smb2: Enforce sec= mount option
CIFS: Fix sparse warnings
CIFS: implement get_dfs_refer for SMB2+
CIFS: use DFS pathnames in SMB2+ Create requests
CIFS: set signing flag in SMB2+ TreeConnect if needed
CIFS: let ses->ipc_tid hold smb2 TreeIds
CIFS: add use_ipc flag to SMB2_ioctl()
CIFS: add build_path_from_dentry_optional_prefix()
CIFS: move DFS response parsing out of SMB1 code
CIFS: Fix possible use after free in demultiplex thread
Pull sched.h split-up from Ingo Molnar:
"The point of these changes is to significantly reduce the
<linux/sched.h> header footprint, to speed up the kernel build and to
have a cleaner header structure.
After these changes the new <linux/sched.h>'s typical preprocessed
size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
lines), which is around 40% faster to build on typical configs.
Not much changed from the last version (-v2) posted three weeks ago: I
eliminated quirks, backmerged fixes plus I rebased it to an upstream
SHA1 from yesterday that includes most changes queued up in -next plus
all sched.h changes that were pending from Andrew.
I've re-tested the series both on x86 and on cross-arch defconfigs,
and did a bisectability test at a number of random points.
I tried to test as many build configurations as possible, but some
build breakage is probably still left - but it should be mostly
limited to architectures that have no cross-compiler binaries
available on kernel.org, and non-default configurations"
* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
sched/headers: Clean up <linux/sched.h>
sched/headers: Remove #ifdefs from <linux/sched.h>
sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
sched/core: Remove unused prefetch_stack()
sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
sched/headers: Remove <linux/signal.h> from <linux/sched.h>
sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
sched/headers: Remove the runqueue_is_locked() prototype
sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
...
If the security type specified using a mount option is not supported,
the SMB2 session setup code changes the security type to RawNTLMSSP. We
should instead fail the mount and return an error.
The patch changes the code for SMB2 to make it similar to the code used
for SMB1. Like in SMB1, we now use the global security flags to select
the security method to be used when no security method is specified and
to return an error when the requested auth method is not available.
For SMB2, we also use ntlmv2 as a synonym for nltmssp.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rcu_dereference_key() and user_key_payload() are currently being used in
two different, incompatible ways:
(1) As a wrapper to rcu_dereference() - when only the RCU read lock used
to protect the key.
(2) As a wrapper to rcu_dereference_protected() - when the key semaphor is
used to protect the key and the may be being modified.
Fix this by splitting both of the key wrappers to produce:
(1) RCU accessors for keys when caller has the key semaphore locked:
dereference_key_locked()
user_key_payload_locked()
(2) RCU accessors for keys when caller holds the RCU read lock:
dereference_key_rcu()
user_key_payload_rcu()
This should fix following warning in the NFS idmapper
===============================
[ INFO: suspicious RCU usage. ]
4.10.0 #1 Tainted: G W
-------------------------------
./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 0
1 lock held by mount.nfs/5987:
#0: (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4]
stack backtrace:
CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G W 4.10.0 #1
Call Trace:
dump_stack+0xe8/0x154 (unreliable)
lockdep_rcu_suspicious+0x140/0x190
nfs_idmap_get_key+0x380/0x420 [nfsv4]
nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4]
decode_getfattr_attrs+0xfac/0x16b0 [nfsv4]
decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4]
nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4]
rpcauth_unwrap_resp+0xe8/0x140 [sunrpc]
call_decode+0x29c/0x910 [sunrpc]
__rpc_execute+0x140/0x8f0 [sunrpc]
rpc_run_task+0x170/0x200 [sunrpc]
nfs4_call_sync_sequence+0x68/0xa0 [nfsv4]
_nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4]
nfs4_lookup_root+0xe0/0x350 [nfsv4]
nfs4_lookup_root_sec+0x70/0xa0 [nfsv4]
nfs4_find_root_sec+0xc4/0x100 [nfsv4]
nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4]
nfs4_get_rootfh+0x6c/0x190 [nfsv4]
nfs4_server_common_setup+0xc4/0x260 [nfsv4]
nfs4_create_server+0x278/0x3c0 [nfsv4]
nfs4_remote_mount+0x50/0xb0 [nfsv4]
mount_fs+0x74/0x210
vfs_kern_mount+0x78/0x220
nfs_do_root_mount+0xb0/0x140 [nfsv4]
nfs4_try_mount+0x60/0x100 [nfsv4]
nfs_fs_mount+0x5ec/0xda0 [nfs]
mount_fs+0x74/0x210
vfs_kern_mount+0x78/0x220
do_mount+0x254/0xf70
SyS_mount+0x94/0x100
system_call+0x38/0xe0
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
We need to recognize and parse transformed packets in demultiplex
thread to find a corresponsing mid and process it further.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This change allows to encrypt packets if it is required by a server
for SMB sessions or tree connections.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cifs fixes from Steve French:
"This ncludes various cifs/smb3 bug fixes, mostly for stable as well.
In the next week I expect that Germano will have some reconnection
fixes, and also I expect to have the remaining pieces of the snapshot
enablement and SMB3 ACLs, but wanted to get this set of bug fixes in"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs_get_root shouldn't use path with tree name
Fix default behaviour for empty domains and add domainauto option
cifs: use %16phN for formatting md5 sum
cifs: Fix smbencrypt() to stop pointing a scatterlist at the stack
CIFS: Fix a possible double locking of mutex during reconnect
CIFS: Fix a possible memory corruption during reconnect
CIFS: Fix a possible memory corruption in push locks
CIFS: Fix missing nls unload in smb2_reconnect()
CIFS: Decrease verbosity of ioctl call
SMB3: parsing for new snapshot timestamp mount parm
When a server returns the optional flag SMB_SHARE_IS_IN_DFS in response
to a tree connect, cifs_build_path_to_root() will return a pathname
which includes the hostname. This causes problems with cifs_get_root()
which separates each component and does a lookup for each component of
the path which in this case will incorrectly include looking up the
hostname component as a path component.
We encountered a problem with dfs shares hosted by a Netapp. When
connecting to nodes pointed to by the DFS share. The tree connect for
these nodes return SMB_SHARE_IS_IN_DFS resulting failures in lookup
in cifs_get_root().
RH bz: 1373153
The patch was tested against a Netapp simulator and by a user using an
actual Netapp server.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Pierguido Lambri <plambri@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
With commit 2b149f119 many things have been fixed/introduced.
However, the default behaviour for RawNTLMSSP authentication
seems to be wrong in case the domain is not passed on the command line.
The main points (see below) of the patch are:
- It alignes behaviour with Windows clients
- It fixes backward compatibility
- It fixes UPN
I compared this behavour with the one from a Windows 10 command line
client. When no domains are specified on the command line, I traced
the packets and observed that the client does send an empty
domain to the server.
In the linux kernel case, the empty domain is replaced by the
primary domain communicated by the SMB server.
This means that, if the credentials are valid against the local server
but that server is part of a domain, then the kernel module will
ask to authenticate against that domain and we will get LOGON failure.
I compared the packet trace from the smbclient when no domain is passed
and, in that case, a default domain from the client smb.conf is taken.
Apparently, connection succeeds anyway, because when the domain passed
is not valid (in my case WORKGROUP), then the local one is tried and
authentication succeeds. I tried with any kind of invalid domain and
the result was always a connection.
So, trying to interpret what to do and picking a valid domain if none
is passed, seems the wrong thing to do.
To this end, a new option "domainauto" has been added in case the
user wants a mechanism for guessing.
Without this patch, backward compatibility also is broken.
With kernel 3.10, the default auth mechanism was NTLM.
One of our testing servers accepted NTLM and, because no
domains are passed, authentication was local.
Moving to RawNTLMSSP forced us to change our command line
to add a fake domain to pass to prevent this mechanism to kick in.
For the same reasons, UPN is broken because the domain is specified
in the username.
The SMB server will work out the domain from the UPN and authenticate
against the right server.
Without the patch, though, given the domain is empty, it gets replaced
with another domain that could be the wrong one for the authentication.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.
The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.
- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.
- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.
- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.
- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.
- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.
- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.
- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"
* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
