Change type of minimum/image_size arguments in process_mem_region to
'unsigned long'. These actually can never be above 4G (even on x86_64),
and they're 'unsigned long' in every other function except this one.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-19-nivedita@alum.mit.edu
Just a trivial rearrangement to do all the processing together, and only
have one call to slots_fetch_random() in the source.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-18-nivedita@alum.mit.edu
Drop unnecessary alignment of image_size to CONFIG_PHYSICAL_ALIGN in
find_random_virt_addr, it cannot change the result: the largest valid
slot is the largest n that satisfies
minimum + n * CONFIG_PHYSICAL_ALIGN + image_size <= KERNEL_IMAGE_SIZE
(since minimum is already aligned) and so n is equal to
(KERNEL_IMAGE_SIZE - minimum - image_size) / CONFIG_PHYSICAL_ALIGN
even if image_size is not aligned to CONFIG_PHYSICAL_ALIGN.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-17-nivedita@alum.mit.edu
Drop unnecessary check that number of slots is not zero in
store_slot_info, it's guaranteed to be at least 1 by the calculation.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-16-nivedita@alum.mit.edu
The number of slots can be 'unsigned int', since on 64-bit, the maximum
amount of memory is 2^52, the minimum alignment is 2^21, so the slot
number cannot be greater than 2^31. But in case future processors have
more than 52 physical address bits, make it 'unsigned long'.
The slot areas are limited by MAX_SLOT_AREA, currently 100. It is
indexed by an int, but the number of areas is stored as 'unsigned long'.
Change both to 'unsigned int' for consistency.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-15-nivedita@alum.mit.edu
This check doesn't save anything. In the case when none of the
parameters are present, each strstr will scan args twice (once to find
the length and then for searching), six scans in total. Just going ahead
and parsing the arguments only requires three scans: strlen, memcpy, and
parsing. This will be the first malloc, so free will actually free up
the memory, so the check doesn't save heap space either.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-14-nivedita@alum.mit.edu
32-bit does not have GB pages, so don't bother checking for them. Using
the IS_ENABLED() macro allows the compiler to completely remove the
gb_huge_pages code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-12-nivedita@alum.mit.edu
Clip the start and end of the region to minimum and mem_limit prior to
the loop. region.start can only increase during the loop, so raising it
to minimum before the loop is enough.
A region that becomes empty due to this will get checked in
the first iteration of the loop.
Drop the check for overlap extending beyond the end of the region. This
will get checked in the next loop iteration anyway.
Rename end to region_end for symmetry with region.start.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-10-nivedita@alum.mit.edu
region.size can be trimmed to store the portion of the region before the
overlap, instead of a separate mem_vector variable.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-9-nivedita@alum.mit.edu
In case of an overlap, the beginning of the region should be used even
if it is exactly image_size, not just strictly larger.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-6-nivedita@alum.mit.edu
On 64-bit, the kernel must be placed below MAXMEM (64TiB with 4-level
paging or 4PiB with 5-level paging). This is currently not enforced by
KASLR, which thus implicitly relies on physical memory being limited to
less than 64TiB.
On 32-bit, the limit is KERNEL_IMAGE_SIZE (512MiB). This is enforced by
special checks in __process_mem_region().
Initialize mem_limit to the maximum (depending on architecture), instead
of ULLONG_MAX, and make sure the command-line arguments can only
decrease it. This makes the enforcement explicit on 64-bit, and
eliminates the 32-bit specific checks to keep the kernel below 512M.
Check upfront to make sure the minimum address is below the limit before
doing any work.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-5-nivedita@alum.mit.edu
Since commit:
0982adc746 ("x86/boot/KASLR: Work around firmware bugs by excluding EFI_BOOT_SERVICES_* and EFI_LOADER_* from KASLR's choice")
process_efi_entries() will return true if we have an EFI memmap, not just
if it contained EFI_MEMORY_MORE_RELIABLE regions.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-4-nivedita@alum.mit.edu
Drop the warning on seeing "--" in handle_mem_options(). This will trigger
whenever one of the memory options is present in the command line
together with "--", but there's no problem if that is the case.
Replace goto with break.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-3-nivedita@alum.mit.edu
Handle the possibility that the command line is NULL.
Replace open-coded strlen with a function call.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-2-nivedita@alum.mit.edu
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the
recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to
get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option is
not sufficient, it needs an explicit -fno-stack-protector to shut it
off.
- Mark check_user_regs() noinstr as it is called from noinstr code. The
missing annotation causes it to be placed in the text section which
makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from ASM
code.
-----BEGIN PGP SIGNATURE-----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=QAeH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
Some Makefiles already pass -ffreestanding unconditionally.
For example, arch/arm64/lib/Makefile, arch/x86/purgatory/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -ffreestanding.
I confirmed GCC 4.8 and Clang manuals document this option.
Get rid of cc-option from -ffreestanding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Commit
17054f492d ("efi/x86: Implement mixed mode boot without the handover protocol")
introduced a new entry point for the EFI stub to be booted in mixed mode
on 32-bit firmware.
When entered via efi32_pe_entry, control is first transferred to
startup_32 to setup for the switch to long mode, and then the EFI stub
proper is entered via efi_pe_entry. efi_pe_entry is an MS ABI function,
and the ABI requires 32 bytes of shadow stack space to be allocated by
the caller, as well as the stack being aligned to 8 mod 16 on entry.
Allocate 40 bytes on the stack before switching to 64-bit mode when
calling efi_pe_entry to account for this.
For robustness, explicitly align boot_stack_end to 16 bytes. It is
currently implicitly aligned since .bss is cacheline-size aligned,
head_64.o is the first object file with a .bss section, and the heap and
boot sizes are aligned.
Fixes: 17054f492d ("efi/x86: Implement mixed mode boot without the handover protocol")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200617131957.2507632-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=idS6
-----END PGP SIGNATURE-----
Merge tag 'x86-build-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
"Misc dependency fixes, plus a documentation update about memory
protection keys support"
* tag 'x86-build-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Update config and kernel doc for MPK feature on AMD
x86/boot: Discard .discard.unreachable for arch/x86/boot/compressed/vmlinux
x86/boot/build: Add phony targets in arch/x86/boot/Makefile to PHONY
x86/boot/build: Make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage
x86/boot/build: Add cpustr.h to targets and remove clean-files
- Add the initrdmem= boot option to specify an initrd embedded in RAM (flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES.
- Various fixes and smaller cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U/uh
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc updates:
- Add the initrdmem= boot option to specify an initrd embedded in RAM
(flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES
- Various fixes and smaller cleanups"
* tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Correct relocation destination on old linkers
x86/boot/compressed/64: Switch to __KERNEL_CS after GDT is loaded
x86/boot: Fix -Wint-to-pointer-cast build warning
x86/boot: Add kstrtoul() from lib/
x86/tboot: Mark tboot static
x86/setup: Add an initrdmem= option to specify initrd physical address
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl7Lb8UACgkQwjcgfpV0
+n3/aAgAkEqqR/BoyzFiyYHujq6bXjESKYr8LrIjNWfnofB6nZqp1yXwFdL0qbj/
PTZ1qIQAnOMmj11lvy1X894h2ZLqE6XEkqv7Xd2oxkh3fF6amlQUWfMpXUuGLo1k
C4QGSfA0OOiM0OOi0Aqk1fL7sTmH23/j63dTR+fH8JMuYgjdls/yWNs0miqf8W2H
ftj8fAKgHIJzFvdTC0vn1DZ6dEKczGLPEcVZ2ns2IJOJ69DsStKPLcD0mlW+EgV2
EyfRSCQv55RYZRhdUOb+yVLRfU0M0IMDrrCDErHxZHXnQy00tmKXiEL20yuegv3u
MUtRRw8ocn2/RskjgZkxtMjAAlty9A==
=AwCh
-----END PGP SIGNATURE-----
Merge tag 'efi-changes-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI changes for v5.8:
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Conflicts:
drivers/firmware/efi/libstub/efistub.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of using efi_gdt64 to switch back to 64-bit mode and then
switching to the real boot-time GDT, just switch to the boot-time GDT
directly. The two GDT's are identical other than efi_gdt64 not including
the 32-bit code segment.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200523221513.1642948-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
With commit
ce5e3f909f ("efi/printf: Add 64-bit and 8-bit integer support")
arch/x86/boot/compressed/vmlinux may have an undesired .discard.unreachable
section coming from drivers/firmware/efi/libstub/vsprintf.stub.o. That section
gets generated from unreachable() annotations when CONFIG_STACK_VALIDATION is
enabled.
.discard.unreachable contains an R_X86_64_PC32 relocation which will be
warned about by LLD: a non-SHF_ALLOC section (.discard.unreachable) is
not part of the memory image, thus conceptually the distance between a
non-SHF_ALLOC and a SHF_ALLOC is not a constant which can be resolved at
link time:
% ld.lld -m elf_x86_64 -T arch/x86/boot/compressed/vmlinux.lds ... -o arch/x86/boot/compressed/vmlinux
ld.lld: warning: vsprintf.c:(.discard.unreachable+0x0): has non-ABS relocation R_X86_64_PC32 against symbol ''
Reuse the DISCARDS macro which includes .discard.* to drop
.discard.unreachable.
[ bp: Massage and complete the commit message. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lkml.kernel.org/r/20200520182010.242489-1-maskray@google.com
For the 32-bit kernel, as described in
6d92bc9d48 ("x86/build: Build compressed x86 kernels as PIE"),
pre-2.26 binutils generates R_386_32 relocations in PIE mode. Since the
startup code does not perform relocation, any reloc entry with R_386_32
will remain as 0 in the executing code.
Commit
974f221c84 ("x86/boot: Move compressed kernel to the end of the
decompression buffer")
added a new symbol _end but did not mark it hidden, which doesn't give
the correct offset on older linkers. This causes the compressed kernel
to be copied beyond the end of the decompression buffer, rather than
flush against it. This region of memory may be reserved or already
allocated for other purposes by the bootloader.
Mark _end as hidden to fix. This changes the relocation from R_386_32 to
R_386_RELATIVE even on the pre-2.26 binutils.
For 64-bit, this is not strictly necessary, as the 64-bit kernel is only
built as PIE if the linker supports -z noreloc-overflow, which implies
binutils-2.27+, but for consistency, mark _end as hidden here too.
The below illustrates the before/after impact of the patch using
binutils-2.25 and gcc-4.6.4 (locally compiled from source) and QEMU.
Disassembly before patch:
48: 8b 86 60 02 00 00 mov 0x260(%esi),%eax
4e: 2d 00 00 00 00 sub $0x0,%eax
4f: R_386_32 _end
Disassembly after patch:
48: 8b 86 60 02 00 00 mov 0x260(%esi),%eax
4e: 2d 00 f0 76 00 sub $0x76f000,%eax
4f: R_386_RELATIVE *ABS*
Dump from extract_kernel before patch:
early console in extract_kernel
input_data: 0x0207c098 <--- this is at output + init_size
input_len: 0x0074fef1
output: 0x01000000
output_len: 0x00fa63d0
kernel_total_size: 0x0107c000
needed_size: 0x0107c000
Dump from extract_kernel after patch:
early console in extract_kernel
input_data: 0x0190d098 <--- this is at output + init_size - _end
input_len: 0x0074fef1
output: 0x01000000
output_len: 0x00fa63d0
kernel_total_size: 0x0107c000
needed_size: 0x0107c000
Fixes: 974f221c84 ("x86/boot: Move compressed kernel to the end of the decompression buffer")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200207214926.3564079-1-nivedita@alum.mit.edu
Mike Lothian reports that after commit
964124a97b ("efi/x86: Remove extra headroom for setup block")
gcc 10.1.0 fails with
HOSTCC arch/x86/boot/tools/build
/usr/lib/gcc/x86_64-pc-linux-gnu/10.1.0/../../../../x86_64-pc-linux-gnu/bin/ld:
error: linker defined: multiple definition of '_end'
/usr/lib/gcc/x86_64-pc-linux-gnu/10.1.0/../../../../x86_64-pc-linux-gnu/bin/ld:
/tmp/ccEkW0jM.o: previous definition here
collect2: error: ld returned 1 exit status
make[1]: *** [scripts/Makefile.host:103: arch/x86/boot/tools/build] Error 1
make: *** [arch/x86/Makefile:303: bzImage] Error 2
The issue is with the _end variable that was added, to hold the end of
the compressed kernel from zoffsets.h (ZO__end). The name clashes with
the linker-defined _end symbol that indicates the end of the build
program itself.
Even when there is no compile-time error, this causes build to use
memory past the end of its .bss section.
To solve this, mark _end as static, and for symmetry, mark the rest of
the variables that keep track of symbols from the compressed kernel as
static as well.
Fixes: 964124a97b ("efi/x86: Remove extra headroom for setup block")
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200511225849.1311869-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When the pre-decompression code loads its first GDT in startup_64(), it
is still running on the CS value of the previous GDT. In the case of
SEV-ES, this is the EFI GDT but it can be anything depending on what has
loaded the kernel (boot loader, container runtime, etc.)
To make exception handling work (especially IRET) the CPU needs to
switch to a CS value in the current GDT, so jump to __KERNEL_CS after
the first GDT is loaded. This is prudent also as a general sanitization
of CS to a known good value.
[ bp: Massage commit message. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200428151725.31091-13-joro@8bytes.org
Fix this warning when building 32-bit with
CONFIG_RANDOMIZE_BASE=y
CONFIG_MEMORY_HOTREMOVE=y
arch/x86/boot/compressed/acpi.c:316:9: warning: \
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Have get_cmdline_acpi_rsdp() return unsigned long which is the proper
type to convert to a pointer of the respective width.
[ bp: Rewrite commit message, touch ups. ]
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1587645588-7130-3-git-send-email-vamshi.k.sthambamkadi@gmail.com
Add kstrtoul() to ../boot/ to be used by facilities there too.
[
bp: Massage, make _kstrtoul() static. Prepend function names with
"boot_". This is a temporary workaround for build errors like:
ld: arch/x86/boot/compressed/acpi.o: in function `count_immovable_mem_regions':
acpi.c:(.text+0x463): undefined reference to `_kstrtoul'
make[2]: *** [arch/x86/boot/compressed/Makefile:117: arch/x86/boot/compressed/vmlinux] Error 1
due to the namespace clash between x86/boot/ and kernel proper.
Future reorg will get rid of the linux/linux/ namespace as much as
possible so that x86/boot/ can be independent from kernel proper. ]
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1587645588-7130-2-git-send-email-vamshi.k.sthambamkadi@gmail.com
Instead of using __efistub_global to force variables into the .data
section, leave them in the .bss but pull the EFI stub's .bss section
into .data in the linker script for the compressed kernel.
Add relocation checking for x86 as well to catch non-PC-relative
relocations that require runtime processing, since the EFI stub does not
do any runtime relocation processing.
This will catch, for example, data relocations created by static
initializers of pointers.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200416151227.3360778-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
These targets are correctly added to PHONY in arch/x86/Makefile, but
not in arch/x86/boot/Makefile. Thus, with a file 'install' in the top
directory, 'make install' does nothing:
$ touch install
$ make install
make[1]: 'install' is up to date.
Add them to the PHONY targets in the boot Makefile too.
[ bp: Massage. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063852.8298-2-masahiroy@kernel.org
bzlilo is an installation target because it copies files to
$(INSTALL_PATH)/, then runs 'lilo'. However, arch/x86/Makefile and
arch/x86/boot/Makefile have it depend on vmlinux and $(obj)/bzImage,
respectively.
'make bzlilo' may update some build artifacts in the source tree.
As commit
19514fc665 ("arm, kbuild: make "make install" not depend on vmlinux")
explained, this should not happen.
Make 'bzlilo' not depend on any build artifact.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063852.8298-1-masahiroy@kernel.org
Files in $(targets) are always cleaned up. Move the 'targets' assignment
out of the ifdef and remove 'clean-files'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063241.7437-1-masahiroy@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Pull trivial tree updates from Jiri Kosina:
"My attempt to revitalize trivial queue I've been neglecting for years
(what a disaster that was for this world, right? :) ) with patches
collected from backlog that were still relevant and not applied
elsewhere in the meantime"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
err.h: remove deprecated PTR_RET for good
blk-mq: Fix typo in comment
x86/boot: Fix comment spelling
sh: mach-highlander: Fix comment spelling
s390/dasd: Fix comment spelling
mfd: wm8994: Fix comment spelling
docs: Add reference in binfmt-misc.rst
genirq: fix kerneldoc comment for irq_desc
drm/amdgpu: fix two documentation mismatch issues
HID: fix Kconfig word ordering
list/hashtable: minor documentation corrections.
Pull x86 boot updates from Ingo Molnar:
"Misc cleanups and small enhancements all around the map"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Fix debug_puthex() parameter type
x86/setup: Fix static memory detection
x86/vmlinux: Drop unneeded linker script discard of .eh_frame
x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
x86/boot/compressed: Remove .eh_frame section from bzImage
x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
x86/boot/compressed/64: Use LEA to initialize boot stack pointer
In the CONFIG_X86_VERBOSE_BOOTUP=Y case, the debug_puthex() macro just
turns into __puthex(), which takes 'unsigned long' as parameter.
But in the CONFIG_X86_VERBOSE_BOOTUP=N case, it is a function which
takes 'unsigned char *', causing compile warnings when the function is
used. Fix the parameter type to get rid of the warnings.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200319091407.1481-11-joro@8bytes.org
Add alignment slack to the PE image size, so that we can realign the
decompression buffer within the space allocated for the image.
Only relocate the kernel if it has been loaded at an unsuitable address:
- Below LOAD_PHYSICAL_ADDR, or
- Above 64T for 64-bit and 512MiB for 32-bit
For 32-bit, the upper limit is conservative, but the exact limit can be
difficult to calculate.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-20-ardb@kernel.org
The following commit:
223e3ee56f ("efi/x86: add headroom to decompressor BSS to account for setup block")
added headroom to the PE image to account for the setup block, which
wasn't used for the decompression buffer.
Now that the decompression buffer is located at the start of the image,
and includes the setup block, this is no longer required.
Add a check to make sure that the head section of the compressed kernel
won't overwrite itself while relocating. This is only for
future-proofing as with current limits on the setup and the actual size
of the head section, this can never happen.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-19-ardb@kernel.org
Store the kernel's link address as ImageBase in the PE header. Note that
the PE specification requires the ImageBase to be 64k aligned. The
preferred address should almost always satisfy that, except for 32-bit
kernel if the configuration has been customized.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-4-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-18-ardb@kernel.org
In preparation for being able to decompress into a buffer starting at a
different address than startup_32, save the calculated output address
instead of recalculating it later.
We now keep track of three addresses:
%edx: startup_32 as we were loaded by bootloader
%ebx: new location of compressed kernel
%ebp: start of decompression buffer
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-2-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-16-ardb@kernel.org
The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).
When loading a 64-bit kernel using the new efi32_pe_entry() point added by:
97aa276579 ("efi/x86: Add true mixed mode entry point into .compat section")
using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.
Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
code32_start is meant for 16-bit real-mode bootloaders to inform the
kernel where the 32-bit protected mode code starts. Nothing in the
protected mode kernel except the EFI stub uses it.
efi_main() currently returns boot_params, with code32_start set inside it
to tell efi_stub_entry() where startup_32 is located. Since it was invoked
by efi_stub_entry() in the first place, boot_params is already known.
Return the address of startup_32 instead.
This will allow a 64-bit kernel to live above 4Gb, for example, and it's
cleaner as well.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-13-ardb@kernel.org
The following commit:
ef5a7b5eb1 ("efi/x86: Remove GDT setup from efi_main")
introduced GDT setup into the 32-bit kernel's startup_32, and reloads
the GDTR after relocating the kernel for paranoia's sake.
A followup commit:
32d009137a ("x86/boot: Reload GDTR after copying to the end of the buffer")
introduced a similar GDTR reload in the 64-bit kernel as well.
The GDTR is adjusted by (init_size-_end), however this may not be the
correct offset to apply if the kernel was loaded at a misaligned address
or below LOAD_PHYSICAL_ADDR, as in that case the decompression buffer
has an additional offset from the original load address.
This should never happen for a conformant bootloader, but we're being
paranoid anyway, so just store the new GDT address in there instead of
adding any offsets, which is simpler as well.
Fixes: ef5a7b5eb1 ("efi/x86: Remove GDT setup from efi_main")
Fixes: 32d009137a ("x86/boot: Reload GDTR after copying to the end of the buffer")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20200226230031.3011645-2-nivedita@alum.mit.edu
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
+n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
=pDE3
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that .eh_frame sections for the files in setup.elf and realmode.elf
are not generated anymore, the linker scripts don't need the special
output section name /DISCARD/ any more.
Remove the one in the main kernel linker script as well, since there are
no .eh_frame sections already, and fix up a comment referencing .eh_frame.
Update the comment in asm/dwarf2.h referring to .eh_frame so it continues
to make sense, as well as being more specific.
[ bp: Touch up commit message. ]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200224232129.597160-3-nivedita@alum.mit.edu
While discussing a patch to discard .eh_frame from the compressed
vmlinux using the linker script, Fangrui Song pointed out [1] that these
sections shouldn't exist in the first place because arch/x86/Makefile
uses -fno-asynchronous-unwind-tables.
It turns out this is because the Makefiles used to build the compressed
kernel redefine KBUILD_CFLAGS, dropping this flag.
Add the flag to the Makefile for the compressed kernel, as well as the
EFI stub Makefile to fix this.
Also add the flag to boot/Makefile and realmode/rm/Makefile so that the
kernel's boot code (boot/setup.elf) and realmode trampoline
(realmode/rm/realmode.elf) won't be compiled with .eh_frame sections,
since their linker scripts also just discard them.
[1] https://lore.kernel.org/lkml/20200222185806.ywnqhfqmy67akfsa@google.com/
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200224232129.597160-2-nivedita@alum.mit.edu
Discarding unnecessary sections with "*(*)" (see thread at Link: below)
works fine with the bfd linker but fails with lld:
$ make -j$(nproc) -s CC=clang LD=ld.lld O=out.x86_64 distclean defconfig bzImage
ld.lld: error: discarding .shstrtab section is not allowed
lld tries to also discard essential sections like .shstrtab, .symtab and
.strtab, which results in the link failing since .shstrtab is required
by the ELF specification: the e_shstrndx field in the ELF header is the
index of .shstrtab, and each section in the section table is required to
have an sh_name that points into the .shstrtab.
.symtab and .strtab are also necessary to generate the zoffset.h file
for the bzImage header.
Since the only sizeable section that can be discarded is .eh_frame,
restrict the discard to only .eh_frame to be safe.
[ bp: Flesh out commit message and replace offending commit with this one. ]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200109150218.16544-2-nivedita@alum.mit.edu
Now that we have added new ways to load the initrd or the mixed mode
kernel, we will also need a way to tell the loader about this. Add
symbolic constants for the PE/COFF major/minor version numbers (which
fortunately have always been 0x0 for all architectures), so that we
can bump them later to document the capabilities of the stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Replace bare numbers in the PE/COFF header structure with symbolic
constants so they become self documenting.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently, mixed mode is closely tied to the EFI handover protocol
and relies on intimate knowledge of the bootparams structure, setup
header etc, all of which are rather byzantine and entirely specific
to x86.
Even though no other EFI supported architectures are currently known
that could support something like mixed mode, it still makes sense to
abstract a bit from this, and make it part of a generic Linux on EFI
boot protocol.
To that end, add a .compat section to the mixed mode binary, and populate
it with the PE machine type and entry point address, allowing firmware
implementations to match it to their native machine type, and invoke
non-native binaries using a secondary entry point.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add support for booting 64-bit x86 kernels from 32-bit firmware running
on 64-bit capable CPUs without requiring the bootloader to implement
the EFI handover protocol or allocate the setup block, etc etc, all of
which can be done by the stub itself, using code that already exists.
Instead, create an ordinary EFI application entrypoint but implemented
in 32-bit code [so that it can be invoked by 32-bit firmware], and stash
the address of this 32-bit entrypoint in the .compat section where the
bootloader can find it.
Note that we use the setup block embedded in the binary to go through
startup_32(), but it gets reallocated and copied in efi_pe_entry(),
using the same code that runs when the x86 kernel is booted in EFI
mode from native firmware. This requires the loaded image protocol to
be installed on the kernel image's EFI handle, and point to the kernel
image itself and not to its loader. This, in turn, requires the
bootloader to use the LoadImage() boot service to load the 64-bit
image from 32-bit firmware, which is in fact supported by firmware
based on EDK2. (Only StartImage() will fail, and instead, the newly
added entrypoint needs to be invoked)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In commit
c7fb93ec51 ("x86/efi: Include a .bss section within the PE/COFF headers")
we added a separate .bss section to the PE/COFF header of the compressed
kernel describing the static memory footprint of the decompressor, to
ensure that it has enough headroom to decompress itself.
We can achieve the exact same result by increasing the virtual size of
the .text section, without changing the raw size, which, as per the
PE/COFF specification, requires the loader to zero initialize the delta.
Doing so frees up a slot in the section table, which we will use later
to describe the mixed mode entrypoint.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In the bootparams struct, init_size defines the static footprint of the
bzImage, counted from the start of the kernel image, i.e., startup_32().
The PE/COFF metadata declares the same size for the entire image, but this
time, the image includes the setup block as well, and so the space reserved
by UEFI is a bit too small. This usually doesn't matter, since we normally
relocate the kernel into a memory allocation of the correct size.
But in the unlikely case that the image happens to be loaded at exactly
the preferred offset, we skip this relocation, and execute the image in
place, stepping on memory beyond the provided allocation, which may be
in use for other purposes.
Let's fix this by adding the size of the setup block to the image size as
declared in the PE/COFF header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Most of the EFI stub source files of all architectures reside under
drivers/firmware/efi/libstub, where they share a Makefile with special
CFLAGS and an include file with declarations that are only relevant
for stub code.
Currently, we carry a lot of stub specific stuff in linux/efi.h only
because eboot.c in arch/x86 needs them as well. So let's move eboot.c
into libstub/, and move the contents of eboot.h that we still care
about into efistub.h
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When using the native PE entry point (as opposed to the EFI handover
protocol entry point that is used more widely), we set code32_start,
which is a 32-bit wide field, to the effective symbol address of
startup_32, which could overflow given that the EFI loader may have
located the running image anywhere in memory, and we haven't reached
the point yet where we relocate ourselves.
Since we relocate ourselves if code32_start != pref_address, this
isn't likely to lead to problems in practice, given how unlikely
it is that the truncated effective address of startup_32 happens
to equal pref_address. But it is better to defer the assignment
of code32_start to after the relocation, when it is guaranteed to
fit.
While at it, move the call to efi_relocate_kernel() to an earlier
stage so it is more likely that our preferred offset in memory has
not been occupied by other memory allocations done in the mean time.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We have some code in the EFI stub entry point that takes the address
of the apm_bios_info struct in the newly allocated and zeroed out
boot_params structure, only to zero it out again. This is pointless
so remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Rearrange the instructions a bit to use a 32-bit displacement once
instead of 2/3 times. This saves 8 bytes of machine code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200202171353.3736319-8-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The limit value for the GDTR should be such that adding it to the base
address gives the address of the last byte of the GDT, i.e. it should be
one less than the size, not the size.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200202171353.3736319-7-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The 64-bit kernel will already load a GDT in startup_64, which is the
next function to execute after return from efi_main.
Add GDT setup code to the 32-bit kernel's startup_32 as well. Doing it
in the head code has the advantage that we can avoid potentially
corrupting the GDT during copy/decompression. This also removes
dependence on having a specific GDT layout setup by the bootloader.
Both startup_32 and startup_64 now clear interrupts on entry, so we can
remove that from efi_main as well.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200202171353.3736319-6-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
startup_32 already clears these flags on entry, do it in startup_64 as
well for consistency.
The direction flag in particular is not specified to be cleared in the
boot protocol documentation, and we currently call into C code
(paging_prepare) without explicitly clearing it.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200202171353.3736319-5-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The GDT may get overwritten during the copy or during extract_kernel,
which will cause problems if any segment register is touched before the
GDTR is reloaded by the decompressed kernel. For safety update the GDTR
to point to the GDT within the copied kernel.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200202171353.3736319-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When booting in mixed mode, the firmware's GDT is still installed at
handover entry in efi32_stub_entry. We save the GDTR for later use in
__efi64_thunk but we are assuming that descriptor 2 (__KERNEL_CS) is a
valid 32-bit code segment descriptor and that descriptor 3
(__KERNEL_DS/__BOOT_DS) is a valid data segment descriptor.
This happens to be true for OVMF (it actually uses descriptor 1 for data
segments, but descriptor 3 is also setup as data), but we shouldn't
depend on this being the case.
Fix this by saving the code and data selectors in addition to the GDTR
in efi32_stub_entry, and restoring them in __efi64_thunk before calling
the firmware. The UEFI specification guarantees that selectors will be
flat, so using the DS selector for all the segment registers should be
enough.
We also need to install our own GDT before initializing segment
registers in startup_32, so move the GDT load up to the beginning of the
function.
[ardb: mention mixed mode in the commit log]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200202171353.3736319-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit
5b11f1cee5 ("x86, boot: straighten out ranges to copy/zero in
compressed/head*.S")
introduced a separate .pgtable section, splitting it out from the rest
of .bss. This section was added without the writeable flag, marking it
as read-only. This results in the linker putting the .rela.dyn section
(containing bogus dynamic relocations from head_64.o) after the .bss and
.pgtable sections.
When objcopy is used to convert compressed/vmlinux into a binary for
the bzImage:
$ objcopy -O binary -R .note -R .comment -S arch/x86/boot/compressed/vmlinux \
arch/x86/boot/vmlinux.bin
the .bss and .pgtable sections get materialized as ~176KiB of zero
bytes in the binary in order to place .rela.dyn at the correct location.
Fix this by marking .pgtable as writeable. This moves the .rela.dyn
section up in the ELF image layout so that .bss and .pgtable are the
last allocated sections and so don't appear in bzImage.
[ bp: Massage commit message. ]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200109150218.16544-1-nivedita@alum.mit.edu
GCC 10 changed the default to -fno-common, which leads to
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; \
arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here
make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1
Since __force_order is already provided in pgtable_64.c, there is no
need to declare __force_order in kaslr_64.c.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200124181811.4780-1-hjl.tools@gmail.com
z_output_len is the size of the decompressed payload (i.e. vmlinux +
vmlinux.relocs) and is generated as an unsigned 32-bit quantity by
mkpiggy.c.
The current
movq $z_output_len, %r9
instruction generates a sign-extended move to %r9. Using
movl $z_output_len, %r9d
will instead zero-extend into %r9, which is appropriate for an unsigned
32-bit quantity. This is also what is already done for z_input_len, the
size of the compressed payload.
[ bp:
Also, z_output_len cannot be a 64-bit quantity because it participates
in:
init_size: .long INIT_SIZE # kernel initialization size
through INIT_SIZE which is a 32-bit quantity determined by the .long
directive (vs .quad for 64-bit). Furthermore, if it really must be a
64-bit quantity, then the insn must be MOVABS which can accommodate a
64-bit immediate and which the toolchain does not generate automatically.
]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200211173333.1722739-1-nivedita@alum.mit.edu
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are
more natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
-----BEGIN PGP SIGNATURE-----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=sv4U
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when the
TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused an
infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects PCI
devices with non-maskable MSI interrupts. The problem is caused by the
non-atomic writes of the MSI address (destination APIC id) and data
(vector) fields which the device uses to construct the MSI message. The
non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after writing
address and before writing data, then the MSI block constructs a
inconsistent message which causes interrupts to be lost and subsequent
malfunction of the device.
The fix is to redirect the interrupt to the new vector on the current
CPU first and then switch it over to the new target CPU. This allows to
observe an eventually raised interrupt in the transitional stage (old
CPU, new vector) to be observed in the APIC IRR and retriggered on the
new target CPU and the new vector. The potential spurious interrupts
caused by this are harmless and can in the worst case expose a buggy
driver (all handlers have to be able to deal with spurious interrupts as
they can and do happen for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall page
which prevents resume hibernation on HYPERV guests. This change got
lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent potentially
stale IOAPIC remote IRR bits which cause stale interrupt lines after
resume.
-----BEGIN PGP SIGNATURE-----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=WxKD
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Break an infinite loop when early parsing of the SRAT table is caused
by a subtable with zero length. Known to affect the ASUS WS X299 SAGE
motherboard with firmware version 1201 which has a large block of
zeros in its SRAT table. The kernel could boot successfully on this
board/firmware prior to the introduction of early parsing this table or
after a BIOS update.
[ bp: Fixup whitespace damage and commit message. Make it return 0 to
denote that there are no immovable regions because who knows what
else is broken in this BIOS. ]
Fixes: 02a3e3cdb7 ("x86/boot: Parse SRAT table and count immovable memory regions")
Signed-off-by: Steven Clarkson <sc@lambdal.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-acpi@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206343
Link: https://lkml.kernel.org/r/CAHKq8taGzj0u1E_i=poHUam60Bko5BpiJ9jn0fAupFUYexvdUQ@mail.gmail.com
Pull x86 cpu-features updates from Ingo Molnar:
"The biggest change in this cycle was a large series from Sean
Christopherson to clean up the handling of VMX features. This both
fixes bugs/inconsistencies and makes the code more coherent and
future-proof.
There are also two cleanups and a minor TSX syslog messages
enhancement"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/cpu: Remove redundant cpu_detect_cache_sizes() call
x86/cpu: Print "VMX disabled" error message iff KVM is enabled
KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs
perf/x86: Provide stubs of KVM helpers for non-Intel CPUs
KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits
KVM: VMX: Check for full VMX support when verifying CPU compatibility
KVM: VMX: Use VMX feature flag to query BIOS enabling
KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR
x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured
x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl()
x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_*
x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs
x86/vmx: Introduce VMX_FEATURES_*
x86/cpu: Clear VMX feature flag if VMX is not fully enabled
x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization
x86/centaur: Use common IA32_FEAT_CTL MSR initialization
x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked
x86/intel: Initialize IA32_FEAT_CTL MSR at boot
tools/x86: Sync msr-index.h from kernel sources
selftests, kvm: Replace manual MSR defs with common msr-index.h
...
Pull x86 boot update from Ingo Molnar:
"Two minor changes: fix an atypical binutils combination build bug, and
also fix a VRAM size check for simplefb"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sysfb: Fix check for bad VRAM size
x86/boot: Discard .eh_frame sections
Pull x86 asm updates from Ingo Molnar:
"Misc updates:
- Remove last remaining calls to exception_enter/exception_exit() and
simplify the entry code some more.
- Remove force_iret()
- Add support for "Fast Short Rep Mov", which is available starting
with Ice Lake Intel CPUs - and make the x86 assembly version of
memmove() use REP MOV for all sizes when FSRM is available.
- Micro-optimize/simplify the 32-bit boot code a bit.
- Use a more future-proof SYSRET instruction mnemonic"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Simplify calculation of output address
x86/entry/64: Add instruction suffix to SYSRET
x86: Remove force_iret()
x86/cpufeatures: Add support for fast short REP; MOVSB
x86/context-tracking: Remove exception_enter/exit() from KVM_PV_REASON_PAGE_NOT_PRESENT async page fault
x86/context-tracking: Remove exception_enter/exit() from do_page_fault()
x86_64 EFI systems are unable to boot due to a typo in a recent commit:
EFI config tables not found.
-- System halted
This was probably due to the absense of CONFIG_EFI_MIXED=y in testing.
Fixes: 796eb8d26a ("efi/libstub/x86: Use const attribute for efi_is_64bit()")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20200122191430.4888-1-cai@lca.pw
Condense the calculation of decompressed kernel start a little.
Committer notes:
before:
ebp = ebx - (init_size - _end)
after:
eax = (ebx + _end) - init_size
where in both ebx contains the temporary address the kernel is moved to
for in-place decompression.
The before and after difference in register state is %eax and %ebp
but that is immaterial because the compressed image is not built with
-mregparm, i.e., all arguments of the following extract_kernel() call
are passed on the stack.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200107194436.2166846-1-nivedita@alum.mit.edu
The final build stage of the x86 kernel captures some symbol
addresses from the decompressor binary and copies them into zoffset.h.
It uses sed with a regular expression that matches the address, symbol
type and symbol name, and mangles the captured addresses and the names
of symbols of interest into #define directives that are added to
zoffset.h
The symbol type is indicated by a single letter, which we match
strictly: only letters in the set 'ABCDGRSTVW' are matched, even
though the actual symbol type is relevant and therefore ignored.
Commit bc7c9d620 ("efi/libstub/x86: Force 'hidden' visibility for
extern declarations") made a change to the way external symbol
references are classified, resulting in 'startup_32' now being
emitted as a hidden symbol. This prevents the use of GOT entries to
refer to this symbol via its absolute address, which recent toolchains
(including Clang based ones) already avoid by default, making this
change a no-op in the majority of cases.
However, as it turns out, the LLVM linker classifies such hidden
symbols as symbols with static linkage in fully linked ELF binaries,
causing tools such as NM to output a lowercase 't' rather than an upper
case 'T' for the type of such symbols. Since our sed expression only
matches upper case letters for the symbol type, the line describing
startup_32 is disregarded, resulting in a build error like the following
arch/x86/boot/header.S:568:18: error: symbol 'ZO_startup_32' can not be
undefined in a subtraction expression
init_size: .long (0x00000000008fd000 - ZO_startup_32 +
(((0x0000000001f6361c + ((0x0000000001f6361c >> 8) + 65536)
- 0x00000000008c32e5) + 4095) & ~4095)) # kernel initialization size
Given that we are only interested in the value of the symbol, let's match
any character in the set 'a-zA-Z' instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
The only users of these got removed, so they also need to be
removed to avoid warnings:
arch/x86/boot/compressed/eboot.c: In function 'setup_efi_pci':
arch/x86/boot/compressed/eboot.c:117:16: error: unused variable 'nr_pci' [-Werror=unused-variable]
unsigned long nr_pci;
^~~~~~
arch/x86/boot/compressed/eboot.c: In function 'setup_uga':
arch/x86/boot/compressed/eboot.c:244:16: error: unused variable 'nr_ugas' [-Werror=unused-variable]
unsigned long nr_ugas;
^~~~~~~
Fixes: 2732ea0d5c ("efi/libstub: Use a helper to iterate over a EFI handle array")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-4-ardb@kernel.org
Reduce the stack frame of the EFI stub's mixed mode thunk routine by
8 bytes, by moving the GDT and return addresses to EBP and EBX, which
we need to preserve anyway, since their top halves will be cleared by
the call into 32-bit firmware code. Doing so results in the UEFI code
being entered with a 16 byte aligned stack, as mandated by the UEFI
spec, fixing the last occurrence in the 64-bit kernel where we violate
this requirement.
Also, move the saved GDT from a global variable to an unused part of the
stack frame, and touch up some other parts of the code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-3-ardb@kernel.org
Reshuffle the x86 stub code a bit so that we can tag the efi_is_64bit()
function with the 'const' attribute, which permits the compiler to
optimize away any redundant calls. Since we have two different entry
points for 32 and 64 bit firmware in the startup code, this also
simplifies the C code since we'll enter it with the efi_is64 variable
already set.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-2-ardb@kernel.org
Add support for generating VMX feature names in capflags.c and use the
resulting x86_vmx_flags to print the VMX flags in /proc/cpuinfo. Don't
print VMX flags if no bits are set in word 0, which holds Pin Controls.
Pin Control's INTR and NMI exiting are fundamental pillars of VMX, if
they are not supported then the CPU is broken, it does not actually
support VMX, or the kernel wasn't built with support for the target CPU.
Print the features in a dedicated "vmx flags" line to avoid polluting
the common "flags" and to avoid having to prefix all flags with "vmx_",
which results in horrendously long names.
Keep synthetic VMX flags in cpufeatures to preserve /proc/cpuinfo's ABI
for those flags. This means that "flags" and "vmx flags" will have
duplicate entries for tpr_shadow (virtual_tpr), vnmi, ept, flexpriority,
vpid and ept_ad, but caps the pollution of "flags" at those six VMX
features. The vendor-specific code that populates the synthetic flags
will be consolidated in a future patch to further minimize the lasting
damage.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-12-sean.j.christopherson@intel.com
