Commit Graph

1132 Commits

Author SHA1 Message Date
Linus Torvalds
b42e6dc66b Microblaze patches for 3.15-rc1
- Use asm-generic/io.h and fix intc/timer code
 - Clean platform handling
 - Enable some syscalls
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iEYEABECAAYFAlNHiDIACgkQykllyylKDCHbLgCggWXqrfHFULZqlTUfAV2krfsx
 q44AoJ5sI0rBHEtXnL8Clo5+4vpftv0G
 =CRLR
 -----END PGP SIGNATURE-----

Merge tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze

Pull Microblaze updates from Michal Simek:
 - use asm-generic/io.h and fix intc/timer code
 - clean platform handling
 - enable some syscalls

* tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Use asm-generic/io.h
  microblaze: Remove platform folder
  microblaze: Remove generic platform
  microblaze: Sort Kconfig options
  microblaze: Move DTS file to common location at boot/dts folder
  microblaze: Fix compilation failure because of release_thread
  microblaze: Fix sparse warning because of missing cpu.h header
  microblaze: Make timer driver endian aware
  microblaze: Make intc driver endian aware
  microblaze: Wire-up new system calls sched_setattr/getattr
  microblaze: Wire-up preadv/pwritev in syscall table
  microblaze: Enable pselect6 syscall
  microblaze: Drop architecture-specific declaration of early_printk
  microblaze: Rename global function heartbeat()
2014-04-11 11:53:45 -07:00
Michal Simek
a66a626538 microblaze: Use asm-generic/io.h
Using generic io.h will narrow down code duplication
in architecture io.h.

- define PCI_IOBASE
- remove non existing pci_io_base extern

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 14:25:53 +02:00
Michal Simek
c24cf712ac microblaze: Remove platform folder
There is no reason to use platform folder structure now.
Everything is OF driven.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 13:45:21 +02:00
Michal Simek
ed85ed697d microblaze: Remove generic platform
All microblaze platforms are using the same configuration
that's why there is no reason to use generic platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 13:45:20 +02:00
Michal Simek
2521338879 microblaze: Sort Kconfig options
Kconfig options should be sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 13:45:20 +02:00
Michal Simek
845e5ef1a6 microblaze: Move DTS file to common location at boot/dts folder
Preparation step for arch/microblaze/platform/ cleanup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 13:45:19 +02:00
Michal Simek
ace526eb24 microblaze: Fix compilation failure because of release_thread
Warning log:
In file included from arch/microblaze/include/asm/thread_info.h:21:0,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/microblaze/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:35,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/sysfs.h:20,
                 from include/linux/kobject.h:21,
                 from include/linux/device.h:17,
                 from include/linux/node.h:17,
                 from include/linux/cpu.h:16,
                 from arch/microblaze/kernel/process.c:11:
arch/microblaze/include/asm/processor.h:125:20: warning: no previous prototype
for 'release_thread' [-Wmissing-prototypes]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 13:45:18 +02:00
Michal Simek
579907e622 microblaze: Fix sparse warning because of missing cpu.h header
Warning:
arch/microblaze/kernel/process.c:164:6: warning: symbol 'arch_cpu_idle'
was not declared. Should it be static?

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 13:45:17 +02:00
Michal Simek
a1715bb7ff microblaze: Make timer driver endian aware
Detect endianess directly on the hardware and use
ioread/iowrite functions.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 11:58:33 +02:00
Michal Simek
1aa1243c33 microblaze: Make intc driver endian aware
Detect endianess directly on the hardware and use
ioread/iowrite functions.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07 11:58:32 +02:00
Linus Torvalds
68114e5eb8 Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added.
 
 Uprobes now work with event triggers and multi buffers.
 Uprobes have support under ftrace and perf.
 
 The big feature is that the function tracer can now be used within the
 multi buffer instances. That is, you can now trace some functions
 in one buffer, others in another buffer, all functions in a third buffer
 and so on. They are basically agnostic from each other. This only
 works for the function tracer and not for the function graph trace,
 although you can have the function graph tracer running in the top level
 buffer (or any tracer for that matter) and have different function tracing
 going on in the sub buffers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTOthtAAoJEKQekfcNnQGu5c8H/Ana/U+0tmksp1dbHkRHsKSH
 +Fsv4Jeu8gf1NaFKHEhkUTcFtnzE6qAPV2VCrcJwXbhAhhwZm+LjrnWdoy3215S3
 cQW4LftLEonh2cM36Cos74TulMEYN6XmL6dQZV+CILKQkDrWU4qJjQ64okXEkqrd
 9iG3p/mSXyvJcmnyg61ALnMOhZDLsXY3djBhWBPhiTPGS6BRb9zh4Pmw6Zv0n2rJ
 U93Gt/3AQrv1ybu73dUxqP0abp60oXOiWoF/R2jcbKqIM+K9RPJX79unCV3jq3u9
 f+6jMlB9PgAMqQj6ihJdwxKDDuzwyrVdEPnsgvl4jarCBCtVVwhKedBaKN/KS8k=
 =HdXY
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Most of the changes were largely clean ups, and some documentation.
  But there were a few features that were added:

  Uprobes now work with event triggers and multi buffers and have
  support under ftrace and perf.

  The big feature is that the function tracer can now be used within the
  multi buffer instances.  That is, you can now trace some functions in
  one buffer, others in another buffer, all functions in a third buffer
  and so on.  They are basically agnostic from each other.  This only
  works for the function tracer and not for the function graph trace,
  although you can have the function graph tracer running in the top
  level buffer (or any tracer for that matter) and have different
  function tracing going on in the sub buffers"

* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Add BUG_ON when stack end location is over written
  tracepoint: Remove unused API functions
  Revert "tracing: Move event storage for array from macro to standalone function"
  ftrace: Constify ftrace_text_reserved
  tracepoints: API doc update to tracepoint_probe_register() return value
  tracepoints: API doc update to data argument
  ftrace: Fix compilation warning about control_ops_free
  ftrace/x86: BUG when ftrace recovery fails
  ftrace: Warn on error when modifying ftrace function
  ftrace: Remove freelist from struct dyn_ftrace
  ftrace: Do not pass data to ftrace_dyn_arch_init
  ftrace: Pass retval through return in ftrace_dyn_arch_init()
  ftrace: Inline the code from ftrace_dyn_table_alloc()
  ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
  tracing: Evaluate len expression only once in __dynamic_array macro
  tracing: Correctly expand len expressions from __dynamic_array macro
  tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
  tracing: Fix event header migrate.h to include tracepoint.h
  tracing: Fix event header writeback.h to include tracepoint.h
  tracing: Warn if a tracepoint is not set via debugfs
  ...
2014-04-03 10:26:31 -07:00
Linus Torvalds
4b1779c2cf PCI changes for the v3.15 merge window:
Enumeration
     - Increment max correctly in pci_scan_bridge() (Andreas Noever)
     - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
     - Assign CardBus bus number only during the second pass (Andreas Noever)
     - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
     - Make sure bus number resources stay within their parents bounds (Andreas Noever)
     - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
     - Check for child busses which use more bus numbers than allocated (Andreas Noever)
     - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
     - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
     - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
     - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
 
   NUMA
     - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
     - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
     - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
     - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
 
   Resource management
     - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
     - Add resource_contains() (Bjorn Helgaas)
     - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
     - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
     - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
     - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
     - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
     - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
     - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
     - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
     - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
     - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
     - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
     - Set type in __request_region() (Bjorn Helgaas)
     - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
     - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
     - Log IDE resource quirk in dmesg (Bjorn Helgaas)
     - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
 
   PCI device hotplug
     - Make check_link_active() non-static (Rajat Jain)
     - Use link change notifications for hot-plug and removal (Rajat Jain)
     - Enable link state change notifications (Rajat Jain)
     - Don't disable the link permanently during removal (Rajat Jain)
     - Don't check adapter or latch status while disabling (Rajat Jain)
     - Disable link notification across slot reset (Rajat Jain)
     - Ensure very fast hotplug events are also processed (Rajat Jain)
     - Add hotplug_lock to serialize hotplug events (Rajat Jain)
     - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
     - Don't turn slot off when hot-added device already exists (Yijing Wang)
 
   MSI
     - Keep pci_enable_msi() documentation (Alexander Gordeev)
     - ahci: Fix broken single MSI fallback (Alexander Gordeev)
     - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
     - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
     - Fix leak of msi_attrs (Greg Kroah-Hartman)
     - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
 
   Virtualization
     - Device-specific ACS support (Alex Williamson)
 
   Freescale i.MX6
     - Wait for retraining (Marek Vasut)
 
   Marvell MVEBU
     - Use Device ID and revision from underlying endpoint (Andrew Lunn)
     - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
     - Call request_resource() on the apertures (Jason Gunthorpe)
     - Fix potential issue in range parsing (Jean-Jacques Hiblot)
 
   Renesas R-Car
     - Check platform_get_irq() return code (Ben Dooks)
     - Add error interrupt handling (Ben Dooks)
     - Fix bridge logic configuration accesses (Ben Dooks)
     - Register each instance independently (Magnus Damm)
     - Break out window size handling (Magnus Damm)
     - Make the Kconfig dependencies more generic (Magnus Damm)
 
   Synopsys DesignWare
     - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
 
   Miscellaneous
     - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
     - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
     - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
     - Clean up par-arch object file list (Liviu Dudau)
     - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
     - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
     - Fix pci_bus_b() build failure (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOdAZAAoJEFmIoMA60/r8VYUQALRrReyMBk3pjRt/fKIX4Kwi
 ydSo/YJeeKTN8K93fLw8bb8bdPItJScJFTfEa4Q2SpZezR/ecGXLowisy0BBaPHK
 qtOyB8EqjkLS17GfyecIe9Nd2SIAI2De/0bchK3kDtIX1YlZB/k/tD3eCPMHDnnl
 m8c5kAHKPQYd8g01I+S8nrtGHk/A33grfYpJXPZbcqyhE0lWU3SI8KDAGbcKzNHE
 23Do0yNyd4nHIdixWlhETcNvzHn35Q/O38JJwW9Mf1aI9gusYuml6GFefCgu/iov
 lxqp3CEW7iPZgQEgNbrQ0HzWn/durL2Trd6S/Yh6f2xbm1LGYKWh3LZUFLd3AQDd
 INEpUgKsyb//nF3dtiyGnZlp0QykoqFyLo2AEDrb+ILTd4up5DeRY/m1UpjAXR5p
 QicBmrDksHrSivPmMZwLx1DFQYKjQbdx5lOqy9hQM/Jmsr+N3/l7QBrbQWXks3JZ
 NNAyn4RZHQB7UDQS/MmVPArs+JK5qaEDQD57QuOTlqgP19VY9C9E/l/aEqefjdFo
 XOAm7CwGpB/iBAkIbE6ROEDiJArigRVHEfxLYeE/jtGOdRDCD1deWk+g3S8DWD7m
 ZxWSgIVB00PMAmomczdg59YVFBhocgwPUa8/cw6yqzx2QKP4mWXIFZ/Sjau5I3tn
 WWoxXlUirZfTJc29XnVy
 =3mNS
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
   - Increment max correctly in pci_scan_bridge() (Andreas Noever)
   - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
   - Assign CardBus bus number only during the second pass (Andreas Noever)
   - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
   - Make sure bus number resources stay within their parents bounds (Andreas Noever)
   - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
   - Check for child busses which use more bus numbers than allocated (Andreas Noever)
   - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
   - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
   - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
   - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)

  NUMA
   - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
   - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
   - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
   - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)

  Resource management
   - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
   - Add resource_contains() (Bjorn Helgaas)
   - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
   - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
   - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
   - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
   - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
   - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
   - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
   - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
   - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
   - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
   - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
   - Set type in __request_region() (Bjorn Helgaas)
   - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
   - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
   - Log IDE resource quirk in dmesg (Bjorn Helgaas)
   - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)

  PCI device hotplug
   - Make check_link_active() non-static (Rajat Jain)
   - Use link change notifications for hot-plug and removal (Rajat Jain)
   - Enable link state change notifications (Rajat Jain)
   - Don't disable the link permanently during removal (Rajat Jain)
   - Don't check adapter or latch status while disabling (Rajat Jain)
   - Disable link notification across slot reset (Rajat Jain)
   - Ensure very fast hotplug events are also processed (Rajat Jain)
   - Add hotplug_lock to serialize hotplug events (Rajat Jain)
   - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
   - Don't turn slot off when hot-added device already exists (Yijing Wang)

  MSI
   - Keep pci_enable_msi() documentation (Alexander Gordeev)
   - ahci: Fix broken single MSI fallback (Alexander Gordeev)
   - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
   - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
   - Fix leak of msi_attrs (Greg Kroah-Hartman)
   - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)

  Virtualization
   - Device-specific ACS support (Alex Williamson)

  Freescale i.MX6
   - Wait for retraining (Marek Vasut)

  Marvell MVEBU
   - Use Device ID and revision from underlying endpoint (Andrew Lunn)
   - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
   - Call request_resource() on the apertures (Jason Gunthorpe)
   - Fix potential issue in range parsing (Jean-Jacques Hiblot)

  Renesas R-Car
   - Check platform_get_irq() return code (Ben Dooks)
   - Add error interrupt handling (Ben Dooks)
   - Fix bridge logic configuration accesses (Ben Dooks)
   - Register each instance independently (Magnus Damm)
   - Break out window size handling (Magnus Damm)
   - Make the Kconfig dependencies more generic (Magnus Damm)

  Synopsys DesignWare
   - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)

  Miscellaneous
   - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
   - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
   - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
   - Clean up par-arch object file list (Liviu Dudau)
   - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
   - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
   - Fix pci_bus_b() build failure (Paul Gortmaker)"

* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  Revert "[PATCH] Insert GART region into resource map"
  PCI: Log IDE resource quirk in dmesg
  PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
  PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
  resources: Set type in __request_region()
  PCI: Don't check resource_size() in pci_bus_alloc_resource()
  s390/PCI: Use generic pci_enable_resources()
  tile PCI RC: Use default pcibios_enable_device()
  sparc/PCI: Use default pcibios_enable_device() (Leon only)
  sh/PCI: Use default pcibios_enable_device()
  microblaze/PCI: Use default pcibios_enable_device()
  alpha/PCI: Use default pcibios_enable_device()
  PCI: Add "weak" generic pcibios_enable_device() implementation
  PCI: Don't enable decoding if BAR hasn't been assigned an address
  PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
  PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
  PCI: Don't try to claim IORESOURCE_UNSET resources
  PCI: Check IORESOURCE_UNSET before updating BAR
  PCI: Don't clear IORESOURCE_UNSET when updating BAR
  PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
  ...

Conflicts:
	arch/x86/include/asm/topology.h
	drivers/ata/ahci.c
2014-04-01 15:14:04 -07:00
Linus Torvalds
a21e40877a Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Ingo Molnar:
 "The main purpose is to fix a full dynticks bug related to
  virtualization, where steal time accounting appears to be zero in
  /proc/stat even after a few seconds of competing guests running busy
  loops in a same host CPU.  It's not a regression though as it was
  there since the beginning.

  The other commits are preparatory work to fix the bug and various
  cleanups"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch: Remove stub cputime.h headers
  sched: Remove needless round trip nsecs <-> tick conversion of steal time
  cputime: Fix jiffies based cputime assumption on steal accounting
  cputime: Bring cputime -> nsecs conversion
  cputime: Default implementation of nsecs -> cputime conversion
  cputime: Fix nsecs_to_cputime() return type cast
2014-04-01 10:16:10 -07:00
Linus Torvalds
462bf234a8 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
 "The biggest change is the MCS spinlock generalization changes from Tim
  Chen, Peter Zijlstra, Jason Low et al.  There's also lockdep
  fixes/enhancements from Oleg Nesterov, in particular a false negative
  fix related to lockdep_set_novalidate_class() usage"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  locking/mutex: Fix debug checks
  locking/mutexes: Add extra reschedule point
  locking/mutexes: Introduce cancelable MCS lock for adaptive spinning
  locking/mutexes: Unlock the mutex without the wait_lock
  locking/mutexes: Modify the way optimistic spinners are queued
  locking/mutexes: Return false if task need_resched() in mutex_can_spin_on_owner()
  locking: Move mcs_spinlock.h into kernel/locking/
  m68k: Skip futex_atomic_cmpxchg_inatomic() test
  futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test
  Revert "sched/wait: Suppress Sparse 'variable shadowing' warning"
  lockdep: Change lockdep_set_novalidate_class() to use _and_name
  lockdep: Change mark_held_locks() to check hlock->check instead of lockdep_no_validate
  lockdep: Don't create the wrong dependency on hlock->check == 0
  lockdep: Make held_lock->check and "int check" argument bool
  locking/mcs: Allow architecture specific asm files to be used for contended case
  locking/mcs: Order the header files in Kbuild of each architecture in alphabetical order
  sched/wait: Suppress Sparse 'variable shadowing' warning
  hung_task/Documentation: Fix hung_task_warnings description
  locking/mcs: Allow architectures to hook in to contended paths
  locking/mcs: Micro-optimize the MCS code, add extra comments
  ...
2014-03-31 10:59:39 -07:00
Bjorn Helgaas
cd3183ba22 microblaze/PCI: Use default pcibios_enable_device()
We don't need anything arch-specific in pcibios_enable_device(), so drop
the arch implementation and use the default generic one.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Michal Simek <monstr@monstr.eu>
CC: microblaze-uclinux@itee.uq.edu.au
2014-03-19 15:00:14 -06:00
Frederic Weisbecker
073d8224d2 arch: Remove stub cputime.h headers
Many architectures have a stub cputime.h that only include the default
cputime.h

Lets remove the useless headers, we only need to mention that we want
the default headers on the Kbuild files.

Cc: Archs <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-03-13 16:09:30 +01:00
Michal Simek
cff2ee046e microblaze: Wire-up new system calls sched_setattr/getattr
Wire-up sched_setattr/getattr syscalls.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-12 10:20:41 +01:00
Michal Simek
f1b6f8712a microblaze: Wire-up preadv/pwritev in syscall table
Enable these two syscalls.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-12 10:20:40 +01:00
Michal Simek
052920a656 microblaze: Enable pselect6 syscall
Enable this syscall and cleanup comments.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-12 10:20:40 +01:00
Guenter Roeck
1b3fe856bd microblaze: Drop architecture-specific declaration of early_printk
miceroblaze:allmodconfig fails to build, complaining that
early_printk is redeclared.

include/linux/printk.h:114:6: error: static declaration of 'early_printk'
		follows non-static declaration
 void early_printk(const char *s, ...) { }
      ^
In file included from arch/microblaze/include/asm/page.h:19:0,
                 from arch/microblaze/include/asm/io.h:15,
                 from include/linux/io.h:22,
                 from kernel/irq/generic-chip.c:6:
arch/microblaze/include/asm/setup.h:22:6:
		note: previous declaration of 'early_printk' was here
 void early_printk(const char *fmt, ...);

This happens because CONFIG_EARLY_PRINTK is not enabled in this
configuration.

The architecture-specific declaration is not needed; drop it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-12 10:10:07 +01:00
Guenter Roeck
79c157a3fb microblaze: Rename global function heartbeat()
microblaze:allmodconfig complains for some configurations that 'heartbeat'
is redefined as different kind of symbol. This is seen in test compiles
of watchdog drivers, which often use 'heartbeat' as ststic variable.

Since 'heartbeat' is an unfortunate name for a global function,
rename it to microblaze_heartbeat. Also rename the setup function
to microblaze_setup_heartbeat.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-12 10:10:06 +01:00
Jiri Slaby
3a36cb11ca ftrace: Do not pass data to ftrace_dyn_arch_init
As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.

Note the documentation was imprecise as it did not suggest to set
(*data) to 0.

Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:14 -05:00
Jiri Slaby
af64a7cb09 ftrace: Pass retval through return in ftrace_dyn_arch_init()
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.

Note there is also "return 0" in every ftrace_dyn_arch_init.  So it is
enough to check the retval and remove all the indirect sets of data on
all archs.

Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz

Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:13 -05:00
Edgar E. Iglesias
a49f56eec5 microblaze: Fix a typo when disabling stack protection
Correct a typo causing the stack protector to be left enabled.
0xFFFFFFF -> 0xFFFFFFFF

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-10 07:44:11 +01:00
Michal Simek
4f3cbd79af microblaze: Define readq and writeq IO helper function
Some drivers check if readq/writeq functions are defined.
If not internal driver functions are used which cause
compilation failures.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-10 07:42:03 +01:00
Michal Simek
ac1566ece4 microblaze: Fix missing HZ macro
Add missing param.h header because of HZ macro.
It is causing compilation failure:
In file included from include/linux/delay.h:14:0,
                    from drivers/clk/qcom/reset.c:18:
drivers/clk/qcom/reset.c: In function 'qcom_reset':
arch/microblaze/include/asm/delay.h:39:35: error: 'HZ'
 undeclared (first use in this function)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-10 07:42:03 +01:00
Tim Chen
ddf1d169c0 locking/mcs: Allow architecture specific asm files to be used for contended case
This patch allows each architecture to add its specific assembly optimized
arch_mcs_spin_lock_contended and arch_mcs_spinlock_uncontended for
MCS lock and unlock functions.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: AswinChandramouleeswaran <aswin@hp.com>
Cc: George Spelvin <linux@horizon.com>
Cc: Rik vanRiel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: MichelLespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Figo.zhang" <figo1802@gmail.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1390347382.3138.67.camel@schen9-DESK
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09 21:18:52 +01:00
Tim Chen
b119fa61d4 locking/mcs: Order the header files in Kbuild of each architecture in alphabetical order
We perform a clean up of the Kbuid files in each architecture.
We order the files in each Kbuild in alphabetical order
by running the below script.

for i in arch/*/include/asm/Kbuild
do
        cat $i | gawk '/^generic-y/ {
                i = 3;
                do {
                        for (; i <= NF; i++) {
                                if ($i == "\\") {
                                        getline;
                                        i = 1;
                                        continue;
                                }
                                if ($i != "")
                                        hdr[$i] = $i;
                        }
                        break;
                } while (1);
                next;
        }
        // {
                print $0;
        }
        END {
                n = asort(hdr);
                for (i = 1; i <= n; i++)
                        print "generic-y += " hdr[i];
        }' > ${i}.sorted;
        mv ${i}.sorted $i;
done

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com>
Cc: AswinChandramouleeswaran <aswin@hp.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "Figo.zhang" <figo1802@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: George Spelvin <linux@horizon.com>
Cc: MichelLespinasse <walken@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[ Fixed build bug. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09 21:17:50 +01:00
Linus Torvalds
627f4b3ee3 Microblaze patches for 3.14-rc1
- Add CCF support
 - Fix BS=0 compilation
 - Wire up defconfig
 - Some minor cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iEYEABECAAYFAlLnf6AACgkQykllyylKDCEPhgCeNZmE2b1pEjeyZ7TGY2+uxi93
 WrwAoIfey197x8D+S+bLgWYfaT++cGe+
 =R9Zc
 -----END PGP SIGNATURE-----

Merge tag 'microblaze-3.14-rc1' of git://git.monstr.eu/linux-2.6-microblaze

Pull microblaze patches from Michal Simek:
 - add CCF support
 - fix BS=0 compilation
 - wire up defconfig
 - some minor cleanups and fixes

* tag 'microblaze-3.14-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add missing v8.50.a version
  microblaze: Fix missing bracket in printk
  microblaze: Fix compilation error for BS=0
  microblaze: Disable stack protection from bootloader
  microblaze: Define read/write{b,w,l}_relaxed MMIO
  microblaze: timer: Do not initialized system timer twice
  microblaze: timer: Use generic sched_clock implementation
  microblaze: Add NOTES section to linker script
  microblaze: Add support for CCF
  microblaze: Simplify fcpu helper function
  microblaze/uapi: Use Kbuild logic to include <asm-generic/types.h>
  microblaze: Remove duplicate declarations of _stext[] and _etext[]
  microblaze: Remove _fdt_start casts
  microblaze: Wire up defconfig to mmu_defconfig
2014-01-28 09:04:11 -08:00
Michal Simek
c0d68cea2d microblaze: Add missing v8.50.a version
Add PVR value for MB 8.50.a.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:31:37 +01:00
Michal Simek
eae38104b2 microblaze: Fix missing bracket in printk
The error was introduced by the patch
"microblaze: Fix coding style issues"
(sha1: 6bd55f0bba).

Error message:
arch/microblaze/kernel/setup.c: In function 'machine_early_init':
arch/microblaze/kernel/setup.c:177:3: error: 'pr_cont'
  undeclared (first use in this function)
arch/microblaze/kernel/setup.c:177:3: note: each undeclared
  identifier is reported only once for each function it appears in
arch/microblaze/kernel/setup.c:177:10: error: expected ';'
  before string constant
arch/microblaze/kernel/setup.c:177:33: error: expected statement
  before ')' token

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:26:34 +01:00
Michal Simek
52ade599e3 microblaze: Fix compilation error for BS=0
This bug was introduced by:
"microblaze: Do not used hardcoded value in exception handler"
(sha1: 9f78d3b5ab)

System without barrel shifter are pretty rare that's why
this bug has been fixed so late.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:26:33 +01:00
Michal Simek
34b9c07a3b microblaze: Disable stack protection from bootloader
Microblaze without MMU can use stack protection in bootloader
and kernel should clear this setting ASAP.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:26:32 +01:00
Michal Simek
17578ea198 microblaze: Define read/write{b,w,l}_relaxed MMIO
More and more ARM specific drivers is using MMIO
readX/writeX_relaxed IO functions and Microblaze can
shared some drivers with ARM too.

This patch adds relaxed IO accessor macros
to prevent compilation failures.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:26:32 +01:00
Michal Simek
03fe0d3c27 microblaze: timer: Do not initialized system timer twice
Only one system timer can be setup.
Do not initialize more system timers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:26:31 +01:00
Michal Simek
839396ab88 microblaze: timer: Use generic sched_clock implementation
Remove sched_clock from the driver and use sched_clock_register
function.
Inspired-by:
"arch_timer: Move to generic sched_clock framework"
(sha1: 65cd4f6c99)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:25:46 +01:00
Michal Simek
0f7e36406c microblaze: Add NOTES section to linker script
Do not keep NOTES section align in proper location.

'readelf' shows that 'NOTE' is placed in wrong location
which is out of virtual and physical load addresses.

Section Headers:
  [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
  [ 1] .note.gnu.build-i NOTE            00000000 001000 000024 00   A  0   0  4
  [ 2] .text             PROGBITS        c0000000 002000 284570 00  AX  0   0 16
  [ 3] __fdt_blob        PROGBITS        c0284570 286570 008000 00   A  0   0  1

Program Headers:
  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align
  LOAD           0x001000 0x00000000 0x00000000 0x00024 0x00024 R   0x1000
  LOAD           0x002000 0xc0000000 0x08000000 0x315428 0x316000 RWE 0x1000

This patch move 'NOTE' section to the correct location.

Checked with:
"ARM: 6740/1: Place correctly notes section in the linker script"
(sha1: dc810efb0c)
and
"[S390] incorrect note program header"
(sha1: 7a2512b744)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:25:01 +01:00
Michal Simek
c1120542b9 microblaze: Add support for CCF
Add support for CCF for Microblaze.

Old binding:
system_timer: system-timer@41c00000 {
	clock-frequency = <75000000>;
	...
}

New binding:
system_timer: system-timer@41c00000 {
	clocks = <&clk_bus>;
	...
}

Both should be supported for a while

Microblaze clock binding:
clocks {
	#address-cells = <1>;
	#size-cells = <0>;
	clk_bus: bus {
		#clock-cells = <0>;
		clock-frequency = <75000000>;
		clock-output-names = "bus";
		compatible = "fixed-clock";
		reg = <1>;
	} ;
	clk_cpu: cpu {
		#clock-cells = <0>;
		clock-frequency = <75000000>;
		clock-output-names = "cpu";
		compatible = "fixed-clock";
		reg = <0>;
	} ;
} ;

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27 11:24:55 +01:00
Linus Torvalds
4ba9920e5e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...
2014-01-25 11:17:34 -08:00
Linus Torvalds
4d8880a0ee DeviceTree updates for 3.14:
- Add new documents with guidelines for DT binding stability and review
   process. This is one of the outcomes of Kernel Summit DT discussions.
 - Remove a bunch of device_type usage which is only for OF and
   deprecated with FDT.
 - Fix a long standing issue with compatible string match ordering.
 - Various minor binding documentation updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJS4T/IAAoJEMhvYp4jgsXiGY4H/jw3ldOrsRK+E2WuTi2iFsaj
 UrDBEkLeL920abdk1Ba19AtMLBoroUr1HuyrCqiKfhilzqWi662YWCLWHZ6KPzGG
 6d5+YztZ2MnoPzcD7RHd9aojL79V8/OGJpitm9NEDdq5GlQ2/v8/Q7ap2tSGFAV6
 +qp5AKLUE0vNm8Lx+0t7NE1Qov2QFvbNycSk4CPOG7nvNBBOfbj7yuofFJmcQxZZ
 gjOYEve9lf+jjigwq5YyQdYdAPs2kAKE8/DtJf6WaRXjyWpLpvgYqgPJ9mWcJzFK
 FKOHvgfxyK0VmWuIfVKg5GASomWPzABXaBGJWG1phtLa3H+Qv+ZKgtYduKrlxkw=
 =vXAO
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 - Add new documents with guidelines for DT binding stability and review
   process.  This is one of the outcomes of Kernel Summit DT discussions
 - Remove a bunch of device_type usage which is only for OF and
   deprecated with FDT
 - Fix a long standing issue with compatible string match ordering
 - Various minor binding documentation updates

* tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: add rockchip vendor prefix
  serial: vt8500: Add missing binding document for arch-vt8500 serial driver.
  dt/bindings: submitting patches and ABI documents
  DT: Add vendor prefix for Emerging Display Technologies
  of: add vendor prefixe for EPFL
  of: add vendor prefix for Gumstix
  of: add vendor prefix for Ka-Ro electronics GmbH
  devicetree: macb: Document clock properties
  dts: bindings: trivial clock bindings doc fixes
  of: Fix __of_device_is_available check
  dt/bindings: Remove device_type "serial" from marvell,mv64360-mpsc
  dt/bindings: remove device_type "network" references
  dt/bindings: remove users of device_type "mdio"
  dt/bindings: Remove references to linux,phandle properties
  dt/bindings: Remove all references to device_type "ethernet-phy"
  of: irq: Ignore disabled intc's when searching map
  of: irq: Ignore disabled interrupt controllers
  OF: base: match each node compatible against all given matches first
  dt-bindings: add GIC-400 binding
2014-01-24 17:27:34 -08:00
Mark Salter
142885379a microblaze: use generic fixmap.h
Signed-off-by: Mark Salter <msalter@redhat.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:54 -08:00
Michal Simek
372c7209d6 microblaze: extable: sort the exception table at build time
Sort the exception table at build-time rather than during boot.

Microblaze is the same case as AARCH64 that's why EM_MICROBLAZE
conditional check was added to allow cross-compilation on machines which
are not running the latest libc-dev.

Inspired by AARCH64 commit adace89562 ("arm64: extable: sort the
exception table at build time").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:50 -08:00
Tang Chen
e7e8de5918 memblock: make memblock_set_node() support different memblock_type
[sfr@canb.auug.org.au: fix powerpc build]
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Chen Tang <imtangchen@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Liu Jiang <jiang.liu@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Michal Simek
21ecc1f1d2 microblaze: Simplify fcpu helper function
Use of_property_read_u32() instead of all of_get_property
with big endian conversion.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-21 08:28:20 +01:00
Geert Uytterhoeven
fd43769ee5 microblaze/uapi: Use Kbuild logic to include <asm-generic/types.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-21 08:28:20 +01:00
Geert Uytterhoeven
64aff1d651 microblaze: Remove duplicate declarations of _stext[] and _etext[]
They're already provided by <asm/sections.h>.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-21 08:28:19 +01:00
Geert Uytterhoeven
7746c99f03 microblaze: Remove _fdt_start casts
_fdt_start is an array, i.e. a pointer.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-21 08:28:18 +01:00
Geert Uytterhoeven
8fad84c17d microblaze: Wire up defconfig to mmu_defconfig
Without this, "make defconfig" fails with

*** Can't find default configuration "arch/microblaze/defconfig"!

All other architectures either set KBUILD_DEFCONFIG, or provide
arch/*/defconfig.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-21 08:28:18 +01:00
Grant Likely
351291754d dt/bindings: remove device_type "network" references
device_type is deprecated and the kernel doesn't require it in most
cases. The only exceptions for flat tree users are the "gianfar",
"ucc_geth" and "ibm,emac" bindings, and arguably that requirement could
be relaxed for ucc_geth and ibm,emac (that is a task for separate
patches though).

This patch removes references to device_type="network" from the binding
documentation where possible and removes the properties from ARM and
microblaze dts files. This patch does not modify the powerpc .dts files
since there are a much larger number of them affected and I think the
ucc_geth, ibm,emac and gianfar users should be addressed before clearing
out the references to reduce the chance of breakage.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
2014-01-16 16:26:19 +00:00
Stephen Rothwell
f549ed1abc arch: Re-sort some Kbuild files to hopefully help avoid some conflicts
Checkin:

    93ea02bb84 arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h

... unfortunately left some Kbuild files out of order, which caused
unnecessary merge conflicts, in particular with checkin:

    e3fec2f74f lib: Add missing arch generic-y entries for asm-generic/hash.h

Put them back in order to make the upcoming merges cleaner.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20140114164420.d296fbcc4be3a5f126c86069@canb.auug.org.au
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Miller <davem@davemloft.net>
2014-01-13 21:56:54 -08:00