Commit Graph

139 Commits

Author SHA1 Message Date
Palmer Dabbelt
9a6a51154f
RISC-V: Fix the rv32i kernel build
These patches for building 32-bit RISC-V kernel.
 - Fix the compile errors and warnings on RV32I.
 - Fix some incompatible problem on RV32I.
 - Add format.h for compatible of print format.

The fixed width integer types format for Elf_Addr will move to
generic header by another patch. For now, there are some warning
about unexpected argument of type on RV32I.

Change in v1:
 - Fix some error in v1
 - Remove implementation of fixed width integer types format for Elf_Addr.
2018-07-04 14:12:53 -07:00
Jim Wilson
1db9b80980
RISC-V: Fix PTRACE_SETREGSET bug.
In riscv_gpr_set, pass regs instead of &regs to user_regset_copyin to fix
gdb segfault.

Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 14:12:47 -07:00
Palmer Dabbelt
8606544890
RISC-V: Don't include irq-riscv-intc.h
This file has never existed in the upstream kernel, but it's guarded by
an #ifdef that's also never existed in the upstream kernel.  As a part
of our interrupt controller refactoring this header is no longer
necessary, but this reference managed to sneak in anyway.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 14:12:42 -07:00
Rob Herring
f67f10b8a6
riscv: remove unnecessary of_platform_populate call
The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 14:12:38 -07:00
Andreas Schwab
781c8fe2da
RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations
The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the
address of the symbol (without overflow check), not its contents.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 14:12:34 -07:00
Zong Li
7df8500217
RISC-V: Change variable type for 32-bit compatible
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 13:56:52 -07:00
Zong Li
c480d8911f
RISC-V: Add definiion of extract symbol's index and type for 32-bit
Use generic marco to get the index and type of symbol.

Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 13:54:08 -07:00
Zong Li
8f79125d28
RISC-V: Select GENERIC_UCMPDI2 on RV32I
On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2
symbol.

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 13:53:33 -07:00
Zong Li
d5fad48cfb
RISC-V: Add conditional macro for zone of DMA32
The DMA32 is for 64-bit usage.

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04 13:53:21 -07:00
Linus Torvalds
6a4d4b3253 RISC-V Updates for the 4.18 Merge Window
This tag contains some small RISC-V updates I'd like to target for 4.18.
 They are all fairly small this time.  Here's a short summary, there's
 more info in the commits/merges.
 
 * A fix to __clear_user to respect the passed arguments.
 * Enough support for the perf subsystem to work with RISC-V's ISA
   defined performance counters.
 * Support for sparse and cleanups suggested by it.
 * Support for R_RISCV_32 (a relocation, not the 32-bit ISA).
 * Some MAINTAINERS cleanups.
 * The addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's always
   present.
 
 I've given these a simple build+boot test.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlsezeQTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQSjWD/999J5HKkHQfHJi4/RQh0SEFNnRv32U
 1O7zwqA5PkeoxWqq1y+dKcPGwZTZncwWp8yn8xipVYTYmYgGNZj9CYdEYkO119y5
 OVcyUZdHlSdXgKkpVDJ0+MrZ60LY6tS66b6oJqQKmB/N4rYvu5L6ctRtyHRQe4nb
 rXNVbnaouiwrFJs9iZaCyaaGAGXKg81C5xCvvr8P0CYzVD4Jx+AmD6c7GohGWJS3
 PLttEsmPaiaV9pzWK18yeFLaIgAqNEo2/s7/QsR1sHo4dUEJyFu9nMHvmjlJucCu
 imrkRwlhsCKxa4ob9D6UPh0qBXDmbSQA1U6M9RKY1jdt7Gul5eMuZIz2r/45752D
 z3YCITgTih2dzWO0zw4GCicCcJoD39IVTrsRCIqxF7jmAfBV8s/U+irMjEMkYhz6
 wKVM9L3/6Z4bPAEztqKMjSw1/nNSavyn6wWACYIj5SDtFqNkvxwSahg1nGTuuoNx
 JqRa0r+lxsbunSwpEVtRROLYE3ZYa/KPrKhKEr+7vkiPlNNv82TZ5T/wkObhVfKp
 S6tZ0/Wb0tchm//LurfLAOV4aZxDlOLfukZ3eSdgBqSfILA3T98zS9FpuCmjiUfG
 6S5GdNvjc3jLLZvPwtofIZmKUSpRSj545J1RRkEcgoEFjXdzxOWFLETsIOIt4nFf
 7Nwjw/Th1hzuyQ==
 =D+sb
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some small RISC-V updates I'd like to target for 4.18.

  They are all fairly small this time. Here's a short summary, there's
  more info in the commits/merges:

   - a fix to __clear_user to respect the passed arguments.

   - enough support for the perf subsystem to work with RISC-V's ISA
     defined performance counters.

   - support for sparse and cleanups suggested by it.

   - support for R_RISCV_32 (a relocation, not the 32-bit ISA).

   - some MAINTAINERS cleanups.

   - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
     always present.

  I've given these a simple build+boot test"

* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
  RISC-V: Handle R_RISCV_32 in modules
  riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
  riscv: add riscv-specific predefines to CHECKFLAGS
  riscv: split the declaration of __copy_user
  riscv: no __user for probe_kernel_address()
  riscv: use NULL instead of a plain 0
  perf: riscv: Add Document for Future Porting Guide
  perf: riscv: preliminary RISC-V support
  MAINTAINERS: Update Albert's email, he's back at Berkeley
  MAINTAINERS: Add myself as a maintainer for SiFive's drivers
  riscv: Fix the bug in memory access fixup code
2018-06-16 06:42:43 +09:00
Linus Torvalds
763f96944c MIPS changes for 4.18
These are the main MIPS changes for 4.18. Rough overview:
 
  (1) MAINTAINERS: Add Paul Burton as MIPS co-maintainer
 
  (2) Misc: Generic compiler intrinsics, Y2038 improvements, Perf+MT fixes
 
  (3) Platform support: Netgear WNR1000 V3, Microsemi Ocelot integrated
      switch, Ingenic watchdog cleanups
 
 Maintainers:
 
  - Add Paul Burton as MIPS co-maintainer
 
 Miscellaneous:
 
  - Use generic GCC library routines from lib/
    - Add notrace to generic ucmpdi2 implementation
    - Rename compiler intrinsic selects to GENERIC_LIB_*
    - vmlinuz: Use generic ashldi3
 
  - y2038: Convert update/read_persistent_clock() to *_clock64()
    - sni: Remove read_persistent_clock()
 
  - perf: Fix perf with MT counting other threads
    - Probe for per-TC perf counters in cpu-probe.c
    - Use correct VPE ID for VPE tracing
 
 Minor cleanups:
 
  - Avoid unneeded built-in.a in DTS dirs
 
  - sc-debugfs: Re-use kstrtobool_from_user
 
  - memset.S: Reinstate delay slot indentation
 
  - VPE: Fix spelling "uneeded" -> "Unneeded"
 
 Platform support:
 
 BCM47xx:
 
  - Add support for Netgear WNR1000 V3
 
  - firmware: Support small NVRAM partitions
 
  - Use __initdata for LEDs platform data
 
 Ingenic:
 
  - Watchdog driver & platform code improvements:
    - Disable clock after stopping counter
    - Use devm_* functions
    - Drop module remove function
    - Move platform reset code to restart handler in driver
    - JZ4740: Convert watchdog instantiation to DT
    - JZ4780: Fix watchdog DT node
    - qi_lb60_defconfig: Enable watchdog driver
 
 Microsemi:
 
  - Ocelot: Add support for integrated switch
    - pcb123: Connect phys to ports
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQS7lRNBWUYtqfDOVL41zuSGKxAj8gUCWx6PaAAKCRA1zuSGKxAj
 8v8JAQCNTrCy4tW4TbOCshOo8mhskGME73BVCpquLdsNcWAVhAD/cC0+DMHxV+eO
 Q/JvLne/N2UssMojF+StX8G+6mIF9g8=
 =qN+K
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.18.

  Rough overview:

   - MAINTAINERS: Add Paul Burton as MIPS co-maintainer

   - Misc: Generic compiler intrinsics, Y2038 improvements, Perf+MT fixes

   - Platform support: Netgear WNR1000 V3, Microsemi Ocelot integrated
     switch, Ingenic watchdog cleanups

  More detailed  summary:

  Maintainers:

   - Add Paul Burton as MIPS co-maintainer, as I soon won't have access
     to much MIPS hardware, nor enough time to properly maintain MIPS on
     my own.

  Miscellaneous:

   - Use generic GCC library routines from lib/
     - Add notrace to generic ucmpdi2 implementation
     - Rename compiler intrinsic selects to GENERIC_LIB_*
     - vmlinuz: Use generic ashldi3

   - y2038: Convert update/read_persistent_clock() to *_clock64()
     - sni: Remove read_persistent_clock()

   - perf: Fix perf with MT counting other threads
     - Probe for per-TC perf counters in cpu-probe.c
     - Use correct VPE ID for VPE tracing

  Minor cleanups:

   - Avoid unneeded built-in.a in DTS dirs

   - sc-debugfs: Re-use kstrtobool_from_user

   - memset.S: Reinstate delay slot indentation

   - VPE: Fix spelling "uneeded" -> "Unneeded"

  Platform support:

  BCM47xx:

   - Add support for Netgear WNR1000 V3

   - firmware: Support small NVRAM partitions

   - Use __initdata for LEDs platform data

  Ingenic:

   - Watchdog driver & platform code improvements:
     - Disable clock after stopping counter
     - Use devm_* functions
     - Drop module remove function
     - Move platform reset code to restart handler in driver
     - JZ4740: Convert watchdog instantiation to DT
     - JZ4780: Fix watchdog DT node
     - qi_lb60_defconfig: Enable watchdog driver

  Microsemi:

   - Ocelot: Add support for integrated switch
     - pcb123: Connect phys to ports"

* tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
  MAINTAINERS: Add Paul Burton as MIPS co-maintainer
  MIPS: ptrace: Make FPU context layout comments match reality
  MIPS: memset.S: Reinstate delay slot indentation
  MIPS: perf: Fix perf with MT counting other threads
  MIPS: perf: Use correct VPE ID when setting up VPE tracing
  MIPS: perf: More robustly probe for the presence of per-tc counters
  MIPS: Probe for MIPS MT perf counters per TC
  MIPS: mscc: Connect phys to ports on ocelot_pcb123
  MIPS: mscc: Add switch to ocelot
  MIPS: JZ4740: Drop old platform reset code
  MIPS: qi_lb60: Enable the jz4740-wdt driver
  MIPS: JZ4780: dts: Fix watchdog node
  MIPS: JZ4740: dts: Add bindings for the jz4740-wdt driver
  watchdog: JZ4740: Drop module remove function
  watchdog: JZ4740: Register a restart handler
  watchdog: JZ4740: Use devm_* functions
  watchdog: JZ4740: Disable clock after stopping counter
  MIPS: VPE: Fix spelling mistake: "uneeded" -> "unneeded"
  MIPS: Re-use kstrtobool_from_user()
  MIPS: Convert update_persistent_clock() to update_persistent_clock64()
  ...
2018-06-12 12:56:02 -07:00
Palmer Dabbelt
24a130ccfe
RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
The SBI exists on all RISC-V systems, so there's no reason not to
compile this driver in.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11 09:16:24 -07:00
Palmer Dabbelt
e0e0c87c02
RISC-V: Make our port sparse-clean
This patch set contains a handful of fixes that clean up the sparse
results for the RISC-V port.  These patches shouldn't have any
functional difference.  The patches:

* Use NULL instead of 0.
* Clean up __user annotations.
* Split __copy_user into two functions, to make the __user annotations
  valid.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2018-06-11 09:09:49 -07:00
Andreas Schwab
77aa85de16
RISC-V: Handle R_RISCV_32 in modules
With CONFIG_MODVERSIONS=y the R_RISCV_32 relocation is used by the
__kcrctab section.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11 09:04:34 -07:00
Alan Kao
1dd985229d
riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
The EXPORT_SYMBOL(_mcount) for RISC-V ended up inside a
CONFIG_DYNAMIC_FTRACE ifdef.  If you enable modules without enabling
CONFIG_DYNAMIC_FTRACE then you'll get a build error without this patch
because the modules won't be able to find _mcount.

The new behavior is to export _mcount whenever CONFIG_FUNCTION_TRACER is
defined.  This matches what every other architecture is doing.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11 09:04:03 -07:00
Luc Van Oostenryck
889d746edd
riscv: add riscv-specific predefines to CHECKFLAGS
RISC-V uses the macro __riscv_xlen, predefined by GCC, to
make the distinction between 32 or 64 bit code.

However, sparse doesn't know anything about this macro
which lead to wrong warnings and failures.

Fix this by adding a define of __riscv_xlen to CHECKFLAGS
and add one for __riscv too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11 09:03:43 -07:00
Luc Van Oostenryck
86406d51d3
riscv: split the declaration of __copy_user
We use a single __copy_user assembly function to copy memory both from
and to userspace. While this works, it triggers sparse errors because
we're implicitly casting between the kernel and user address spaces by
calling __copy_user.

This patch splits the C declaration into a pair of functions,
__asm_copy_{to,from}_user, that have sane semantics WRT __user. This
split make things fine from sparse's point of view. The assembly
implementation keeps a single definition but add a double ENTRY() for it,
one for __asm_copy_to_user and another one for __asm_copy_from_user.
The result is a spare-safe implementation that pays no performance
or code size penalty.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-09 12:34:31 -07:00
Linus Torvalds
410feb75de arm64 updates for 4.18:
- Spectre v4 mitigation (Speculative Store Bypass Disable) support for
   arm64 using SMC firmware call to set a hardware chicken bit
 
 - ACPI PPTT (Processor Properties Topology Table) parsing support and
   enable the feature for arm64
 
 - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
   primary motivation is Scalable Vector Extensions which requires more
   space on the signal frame than the currently defined MINSIGSTKSZ
 
 - ARM perf patches: allow building arm-cci as module, demote dev_warn()
   to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups
 
 - cmpwait() WFE optimisation to avoid some spurious wakeups
 
 - L1_CACHE_BYTES reverted back to 64 (for performance reasons that have
   to do with some network allocations) while keeping ARCH_DMA_MINALIGN
   to 128. cache_line_size() returns the actual hardware Cache Writeback
   Granule
 
 - Turn LSE atomics on by default in Kconfig
 
 - Kernel fault reporting tidying
 
 - Some #include and miscellaneous cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlsaoqsACgkQa9axLQDI
 XvH+8RAAqRCrEtkNPS7zxHyMK/D2cxSy9EVtlJ1sxhmsONEe5t5MDTWX9byobQ5A
 PAKMSQBQgUvecqHLOtD7SJWef1il30zgWmc/yPcgNv3OsA1Au7j2g3ht/Drw+N5I
 Vy0aOUEtw+Jzs7y/CJyl6lufSkkOzszOujt2Nybiz6omztOrwkW9isKnURzQBNj5
 gquZI35h604YJ9F0TqS6ZqU7tNcuB9q02FxvVBpLmb83jP4jSEjYACUJwVVxvEAB
 UXjdD4N130rRXDS5OMRWo5+4SAj+kPYhdVYEvaDx7xTOIRHhXK05GlJbsUAc5E6l
 xy810fH5Dm0diYpVvYWTA5J+BU1jNOvCys5zKWl7gs2P8YB59PdqY4M2YBPNGb5H
 PaVgq73TZAsww6ZInbZlK+wZOIxZZIOf//Z+QKn6EPtu3RmzIFWwyttTj01w1E3i
 LhjcUoGnvxJFcMoCr59ihDwfP9nkCVrNc4REOGaWDk6L/t/bOfaZfDz+OCGbwQdL
 akCFKZI6q5O/no+YfhtdtNFpCQb/Bo1J88KuotICRXq8z4vO41zIG53bi97W8QeG
 rCBiX0NxUxYJ3ybus7kZHTmMGieMyEHP28n12QffwvJj4vJBsUXQBrV8hclx0djZ
 HMt7iPi/0BW6nVV7ngIgN3cdCpaDCEGRsfO4Ch0rFZrC9UbYQnE=
 =uums
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "Apart from the core arm64 and perf changes, the Spectre v4 mitigation
  touches the arm KVM code and the ACPI PPTT support touches drivers/
  (acpi and cacheinfo). I should have the maintainers' acks in place.

  Summary:

   - Spectre v4 mitigation (Speculative Store Bypass Disable) support
     for arm64 using SMC firmware call to set a hardware chicken bit

   - ACPI PPTT (Processor Properties Topology Table) parsing support and
     enable the feature for arm64

   - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
     primary motivation is Scalable Vector Extensions which requires
     more space on the signal frame than the currently defined
     MINSIGSTKSZ

   - ARM perf patches: allow building arm-cci as module, demote
     dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous
     cleanups

   - cmpwait() WFE optimisation to avoid some spurious wakeups

   - L1_CACHE_BYTES reverted back to 64 (for performance reasons that
     have to do with some network allocations) while keeping
     ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual
     hardware Cache Writeback Granule

   - Turn LSE atomics on by default in Kconfig

   - Kernel fault reporting tidying

   - Some #include and miscellaneous cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits)
  arm64: Fix syscall restarting around signal suppressed by tracer
  arm64: topology: Avoid checking numa mask for scheduler MC selection
  ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled
  arm64: cpu_errata: include required headers
  arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
  arm64: signal: Report signal frame size to userspace via auxv
  arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
  arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
  arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
  arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
  arm64: KVM: Add HYP per-cpu accessors
  arm64: ssbd: Add prctl interface for per-thread mitigation
  arm64: ssbd: Introduce thread flag to control userspace mitigation
  arm64: ssbd: Restore mitigation status on CPU resume
  arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
  arm64: ssbd: Add global mitigation state accessor
  arm64: Add 'ssbd' command-line option
  arm64: Add ARCH_WORKAROUND_2 probing
  arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
  arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
  ...
2018-06-08 11:10:58 -07:00
Laurent Dufour
3010a5ea66 mm: introduce ARCH_HAS_PTE_SPECIAL
Currently the PTE special supports is turned on in per architecture
header files.  Most of the time, it is defined in
arch/*/include/asm/pgtable.h depending or not on some other per
architecture static definition.

This patch introduce a new configuration variable to manage this
directly in the Kconfig files.  It would later replace
__HAVE_ARCH_PTE_SPECIAL.

Here notes for some architecture where the definition of
__HAVE_ARCH_PTE_SPECIAL is not obvious:

arm
 __HAVE_ARCH_PTE_SPECIAL which is currently defined in
arch/arm/include/asm/pgtable-3level.h which is included by
arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.

powerpc
__HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
 - arch/powerpc/include/asm/book3s/64/pgtable.h
 - arch/powerpc/include/asm/pte-common.h
The first one is included if (PPC_BOOK3S & PPC64) while the second is
included in all the other cases.
So select ARCH_HAS_PTE_SPECIAL all the time.

sparc:
__HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
defined(__arch64__) which are defined through the compiler in
sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
So select ARCH_HAS_PTE_SPECIAL if SPARC64

There is no functional change introduced by this patch.

Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07 17:34:35 -07:00
Luc Van Oostenryck
9bf97390b3
riscv: no __user for probe_kernel_address()
In is_valid_bugaddr(), probe_kernel_address() is called with
the PC casted to (bug_inst_t __user *) but this function
only take a plain void* as argument, not a __user pointer.

Fix this by removing the unnneded __user in the cast.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-07 08:01:52 -07:00
Luc Van Oostenryck
2861ae302f
riscv: use NULL instead of a plain 0
sbi_remote_sfence_vma() & sbi_remote_fence_i() takes
a pointer as first argument but some macros call them with
a plain 0 which, while legal C, is frowned upon in the kernel.

Change this by replacing the 0 by NULL.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-07 08:01:50 -07:00
Linus Torvalds
93e95fa574 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...
2018-06-04 15:23:48 -07:00
Palmer Dabbelt
32c81bced3
RISC-V: Preliminary Perf Support
The RISC-V ISA defines a core set of performance counters that must
exist on all processors along with a standard way to add more
performance counters.

This patch set adds preliminary perf support for RISC-V systems.  Long
term we'll move to model where all PMUs can be built into the kernel at
the same time, detected at runtime (possibly via device tree), and
provided to userspace.  Since we currently only support the ISA-mandated
performance counters there's no need to detect anything right now.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-04 14:03:18 -07:00
Alan Kao
178e9fc47a
perf: riscv: preliminary RISC-V support
This patch provide a basic PMU, riscv_base_pmu, which supports two
general hardware event, instructions and cycles.  Furthermore, this
PMU serves as a reference implementation to ease the portings in
the future.

riscv_base_pmu should be able to run on any RISC-V machine that
conforms to the Priv-Spec.  Note that the latest qemu model hasn't
fully support a proper behavior of Priv-Spec 1.10 yet, but work
around should be easy with very small fixes.  Please check
https://github.com/riscv/riscv-qemu/pull/115 for future updates.

Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-04 14:02:01 -07:00
Alan Kao
ebcbd75e39
riscv: Fix the bug in memory access fixup code
A piece of fixup code is currently shared by __copy_user and
__clear_user.  It first disables the access to user-space memory
and then returns the "n" argument, which represents #(bytes not processed).
However,__copy_user's "n" is in register a2, while __clear_user's in a1,
and thus it causes errors for programs like setdomainname02 testcase in LTP.

This patch fixes this issue by separating their fixup code and returning
the right value for the kernel to handle a relative fault properly.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-04 13:33:31 -07:00
Christoph Hellwig
10314e09d0 riscv: add swiotlb support
All RISC-V platforms today lack an IOMMU. However, legacy PCI devices
sometimes require DMA-memory to be in the low 32 bits.  To make this work,
we enable the software-based bounce buffers from swiotlb.  They only impose
overhead when the device in question cannot address the full 64-bit address
space, so a perfect fit.

This patch assumes that DMA is coherent with the processor and the PCI
bus.  It also assumes that the processor and devices share a common
address space. This is true for all RISC-V platforms so far.

[changelog stolen from an earlier patch by Palmer Dabbelt that did the
 more complicated swiotlb wireup before the recent consolidation]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-05-19 08:46:26 +02:00
Christoph Hellwig
f1306f0423 riscv: only enable ZONE_DMA32 for 64-bit
Until we actually support > 32bit physical addresses for 32-bit using
highmem there is no point in enabling ZONE_DMA32.  And even if such
support is ever added it probably should be conditional to not burden
low end embedded devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-05-19 08:46:22 +02:00
Christoph Hellwig
c3e4ed012b riscv: simplify Kconfig magic for 32-bit vs 64-bit kernels
We can deduct this directly using a select from ARCH_RV32I/ARCH_RV64I.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-05-19 08:46:12 +02:00
Jeremy Linton
2ff075c7df drivers: base: cacheinfo: setup DT cache properties early
The original intent in cacheinfo was that an architecture
specific populate_cache_leaves() would probe the hardware
and then cache_shared_cpu_map_setup() and
cache_override_properties() would provide firmware help to
extend/expand upon what was probed. Arm64 was really
the only architecture that was working this way, and
with the removal of most of the hardware probing logic it
became clear that it was possible to simplify the logic a bit.

This patch combines the walk of the DT nodes with the
code updating the cache size/line_size and nr_sets.
cache_override_properties() (which was DT specific) is
then removed. The result is that cacheinfo.of_node is
no longer used as a temporary place to hold DT references
for future calls that update cache properties. That change
helps to clarify its one remaining use (matching
cacheinfo nodes that represent shared caches) which
will be used by the ACPI/PPTT code in the following patches.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-17 17:27:49 +01:00
Christoph Hellwig
4965a68780 arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig
Define this symbol if the architecture either uses 64-bit pointers or the
PHYS_ADDR_T_64BIT is set.  This covers 95% of the old arch magic.  We only
need an additional select for Xen on ARM (why anyway?), and we now always
set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
instead of only doing it when highmem is set.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Hogan <jhogan@kernel.org>
2018-05-09 06:57:04 +02:00
Christoph Hellwig
d4a451d5fc arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol
Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a
64-bit phys_addr_t type directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Hogan <jhogan@kernel.org>
2018-05-09 06:56:33 +02:00
Christoph Hellwig
6e88628d03 dma-debug: remove CONFIG_HAVE_DMA_API_DEBUG
There is no arch specific code required for dma-debug, so there is no
need to opt into the support either.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-05-08 13:03:43 +02:00
Christoph Hellwig
325ef1857f PCI: remove PCI_DMA_BUS_IS_PHYS
This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads.  Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-05-07 07:15:41 +02:00
Eric W. Biederman
7ff3a7621d signal/riscv: Replace do_trap_siginfo with force_sig_fault
The function force_sig_fault is just the generic version of
do_trap_siginfo with a (void __user *) instead of an unsigned long
parameter for the address.

So just use force_sig_fault to simplify the code.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: linux-riscv@lists.infradead.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:44:07 -05:00
Eric W. Biederman
4d6a20b135 signal/riscv: Use force_sig_fault where appropriate
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: linux-riscv@lists.infradead.org
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:44:07 -05:00
Eric W. Biederman
3eb0f5193b signal: Ensure every siginfo we send has all bits initialized
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:40:51 -05:00
Aurelien Jarno
85602bea29
RISC-V: build vdso-dummy.o with -no-pie
Debian toolcahin defaults to PIE, and I guess that will also be the case
of most distributions. This causes the following build failure:

  AS      arch/riscv/kernel/vdso/getcpu.o
  AS      arch/riscv/kernel/vdso/flush_icache.o
  VDSOLD  arch/riscv/kernel/vdso/vdso.so.dbg
  OBJCOPY arch/riscv/kernel/vdso/vdso.so
  AS      arch/riscv/kernel/vdso/vdso.o
  VDSOLD  arch/riscv/kernel/vdso/vdso-dummy.o
  LD      arch/riscv/kernel/vdso/vdso-syms.o
riscv64-linux-gnu-ld: attempted static link of dynamic object `arch/riscv/kernel/vdso/vdso-dummy.o'
make[2]: *** [arch/riscv/kernel/vdso/Makefile:43: arch/riscv/kernel/vdso/vdso-syms.o] Error 1
make[1]: *** [scripts/Makefile.build:575: arch/riscv/kernel/vdso] Error 2
make: *** [Makefile:1018: arch/riscv/kernel] Error 2

While the root Makefile correctly passes "-fno-PIE" to build individual
object files, the RISC-V kernel also builds vdso-dummy.o as an
executable, which is therefore linked as PIE. Fix that by updating this
specific link rule to also include "-no-pie".

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-24 10:54:46 -07:00
Christoph Hellwig
5b7252a268
riscv: there is no <asm/handle_irq.h>
So don't list it as generic-y.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-24 10:54:23 -07:00
Christoph Hellwig
86e11757d8
riscv: select DMA_DIRECT_OPS instead of redefining it
DMA_DIRECT_OPS is defined in lib/Kconfig, so don't duplicate it in
arch/riscv/Kconfig.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-24 10:54:08 -07:00
Matt Redfearn
e3d5980568
lib: Rename compiler intrinsic selects to GENERIC_LIB_*
When these are included into arch Kconfig files, maintaining
alphabetical ordering of the selects means these get split up. To allow
for keeping things tidier and alphabetical, rename the selects to
GENERIC_LIB_*

Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-riscv@lists.infradead.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19049/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-23 16:39:36 +01:00
Linus Torvalds
527cd20771 RISC-V changes for 4.17
This tag contains the new features we'd like to incorporate into the
 RISC-V port for 4.17.  We might have a bit more stuff land later in the
 merge window, but I wanted to get this out earlier just so everyone can
 see where we currently stand.
 
 A short summary of the changes is:
 
 * We've added support for dynamic ftrace on RISC-V targets.
 * There have been a handful of cleanups to our atomic and locking
   routines.  They now more closely match the released RISC-V memory
   model draft.
 * Our module loading support has been cleaned up and is now enabled by
   default, despite some limitations still existing.
 * A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE so
   the generic device tree code picks up handling all our command line
   stuff.
 
 There's more information in the merge commits for each patch set.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlrDsOATHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQVDuD/9uBjfgzdyJ/C7+rcN6SgsmCOrDSmZz
 9yx0xqJwuVe8b21Lt4fueDjIMpVfjgxbE4SWTQ/MqaGBcxknOtUpJdGzA98BO6oB
 VU/Mx0EJL2L0N+FNqWuE1KCa6h8PH8PB4pzl/dvwKRdtgViL2EGuzQebSDT2iwTg
 JpCsAzfAZjTT0StVj7vn9/7O3uP/9G9j+GeZFvCT+OxtPHYc5TkDKZuOCI66GokJ
 ppGrqa9MqrWADpqWVBUIYsYqRHrhBUWgBqN5CfgsiRFTQn0ISUpdl/qZbLBVsHfY
 o8i/d0RM1jc5U4+qgZLpB8nD9RYpr9GTQobhNkcjyVmKHJFdJirYDD/y3fi38IoT
 svTv1n3VIFBTv1+u5H/Rv+ABhJx5ofFjboD9IXB3j/82i/T06IMZ2IujAAwLQw4u
 1hE/wKM67c6dR+gqMl8Zq1LuYoUGuc2MIX3eLYc4GmWloZkKg/N7rHjaPFfnZlwd
 ZFfrPl+ZTP3FYpr3yanrVNYwHZfFWPlTnXvPWNFi+A5HPVI7+ScR8++Eaqo1mb5h
 nFr4wS8GX2FbUmF20mf4W7RAkpnnUlo9HRNMqfExTmp+dPCbgVXIEfJTCYsamAPV
 nDQ2xG5aLMyRcUBSbQEi7tninMRFGXiBYbcn6LWhYibBpr5SFGwlSkmWxbDi3ark
 6lsKCBK3qrNHBQ==
 =XrWX
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains the new features we'd like to incorporate into the
  RISC-V port for 4.17. We might have a bit more stuff land later in the
  merge window, but I wanted to get this out earlier just so everyone
  can see where we currently stand.

  A short summary of the changes is:

   - We've added support for dynamic ftrace on RISC-V targets.

   - There have been a handful of cleanups to our atomic and locking
     routines. They now more closely match the released RISC-V memory
     model draft.

   - Our module loading support has been cleaned up and is now enabled
     by default, despite some limitations still existing.

   - A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE
     so the generic device tree code picks up handling all our command
     line stuff.

  There's more information in the merge commits for each patch set"

* tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits)
  RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
  RISC-V: Add definition of relocation types
  RISC-V: Enable module support in defconfig
  RISC-V: Support SUB32 relocation type in kernel module
  RISC-V: Support ADD32 relocation type in kernel module
  RISC-V: Support ALIGN relocation type in kernel module
  RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq
  RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module
  RISC-V: Support CALL relocation type in kernel module
  RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module
  RISC-V: Add section of GOT.PLT for kernel module
  RISC-V: Add sections of PLT and GOT for kernel module
  riscv/atomic: Strengthen implementations with fences
  riscv/spinlock: Strengthen implementations with fences
  riscv/barrier: Define __smp_{store_release,load_acquire}
  riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
  riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
  riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
  riscv/ftrace: Add dynamic function graph tracer support
  riscv/ftrace: Add dynamic function tracer support
  ...
2018-04-04 16:43:47 -07:00
Linus Torvalds
5b1f3dc927 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The usual pile of boring changes:

   - Consolidate tasklet functions to share code instead of duplicating
     it

   - The first step for making the low level entry handler management on
     multi-platform kernels generic

   - A new sysfs file which allows to retrieve the wakeup state of
     interrupts.

   - Ensure that the interrupt thread follows the effective affinity and
     not the programmed affinity to avoid cross core wakeups.

   - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm
     PDC)

   - Fix the wakeup path clock handling for Reneasas interrupt chips.

   - Rework the boot time register reset for ARM GIC-V2/3

   - Better suspend/resume support for ARM GIV-V3/ITS

   - Add missing locking to the ARM GIC set_type() callback

   - Small fixes for the irq simulator code

   - SPDX identifiers for the irq core code and removal of boiler plate

   - Small cleanups all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  openrisc: Set CONFIG_MULTI_IRQ_HANDLER
  arm64: Set CONFIG_MULTI_IRQ_HANDLER
  genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER
  irqchip/gic: Take lock when updating irq type
  irqchip/gic: Update supports_deactivate static key to modern api
  irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling
  irqchip: Add a driver for the Microsemi Ocelot controller
  dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller
  irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn
  irqchip/gic-v3: Don't try to reset AP0Rn
  irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs
  genirq: Remove license boilerplate/references
  genirq: Add missing SPDX identifiers
  genirq/matrix: Cleanup SPDX identifier
  genirq: Cleanup top of file comments
  genirq: Pass desc to __irq_free instead of irq number
  irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE
  irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE
  RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler
  genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ...
2018-04-04 15:19:26 -07:00
Palmer Dabbelt
f6a11d9feb
RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
The device tree code looks for CONFIG_CMDLINE_FORCE, but we were using
CONFIG_CMDLINE_OVERRIDE.  It looks like this was just a hold over from
before our device tree conversion -- in fact, we'd already removed the
support for CONFIG_CMDLINE_OVERRIDE from our arch-specific code so it
didn't even work any more.

Thanks to Mortiz and Trung for finding the original bug, and for Michael
for suggeting a better fix.

CC: Trung Tran <trung.tran@ettus.com>
CC: Michael J Clark <mjc@sifive.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-03 09:48:27 -07:00
Palmer Dabbelt
7a8e7da422
RISC-V: Fixes to module loading
This cleans up the module support that was commited earlier to work with
what's actually emitted from our GCC port as it lands upstream.  Most of
the work here is adding new relocations to the kernel.

There's some limitations on module loading imposed by the kernel:

* The kernel doesn't support linker relaxation, which is necessary to
  support R_RISCV_ALIGN.  In order to get reliable module building
  you're going to need to a GCC that supports the new '-mno-relax',
  which IIRC isn't going to be out until 8.1.0.  It's somewhat unlikely
  that R_RISCV_ALIGN will appear in a module even without '-mno-relax'
  support, so issues shouldn't be common.

* There is no large code model for RISC-V, which means modules must be
  loaded within a 32-bit signed offset of the kernel.  We don't
  currently have any mechanism for ensuring this memory remains free or
  moving pages around, so issues here might be common.

I fixed a singcle merge conflict in arch/riscv/kernel/Makefile.
2018-04-02 20:43:14 -07:00
Palmer Dabbelt
2c9046b71b
RISC-V: Assorted memory model fixes
These fixes fall into three categories

* The definiton of __smp_{store_release,load_acquire}, which allow us to
  emit a full fence when unnecessary.
* Fixes to avoid relying on the behavior of "*.aqrl" atomics, as those
  are specified in the currently released RISC-V memory model draft in
  a way that makes them useless for Linux.  This might change in the
  future, but now the code matches the memory model spec as it's written
  so at least we're getting closer to something sane.  The actual fix is
  to delete the RISC-V specific atomics and drop back to generic
  versions that use the new fences from above.
* Cleanups to our atomic macros, which are mostly non-functional
  changes.

Unfortunately I haven't given these as thorough of a testing as I
probably should have, but I've poked through the code and they seem
generally OK.
2018-04-02 20:36:33 -07:00
Zong Li
e21d54219c
RISC-V: Add definition of relocation types
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:56 -07:00
Zong Li
4a632cec88
RISC-V: Enable module support in defconfig
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:56 -07:00
Zong Li
4aad074c9c
RISC-V: Support SUB32 relocation type in kernel module
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:55 -07:00
Zong Li
8e691b1676
RISC-V: Support ADD32 relocation type in kernel module
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:55 -07:00
Zong Li
29e405cd88
RISC-V: Support ALIGN relocation type in kernel module
Just fail on align type. Kernel modules loader didn't do relax
like linker, it is difficult to remove or migrate the code,
but the remnant nop instructions harm the performaace of module.
We expect the building module with the no-relax option.

Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:55 -07:00