Standard kernel compilation produces the following warning:
net/core/rtnetlink.c: In function ‘rtnl_newlink’:
net/core/rtnetlink.c:3232:1: warning: the frame size of 1288 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
This should not really be an issue, as rtnl_newlink() stack is
generally quite shallow.
Fix the warning by allocating attributes with kmalloc() in a wrapper
and passing it down to rtnl_newlink(), avoiding complexities on error
paths.
Alternatively we could kmalloc() some structure within rtnl_newlink(),
slave attributes look like a good candidate. In practice it adds to
already rather high complexity and length of the function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_newlink() used to create VLAs based on link kind. Since
commit ccf8dbcd06 ("rtnetlink: Remove VLA usage") statically
sized array is created on the stack, so there is no more use
for a separate code block that used to be the VLA's live range.
While at it christmas tree the variables. Note that there is
a goto-based retry so to be on the safe side the variables can
no longer be initialized in place. It doesn't seem to matter,
logically, but why make the code harder to read..
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
nfp: update TX path to enable repr offloads
This set starts with three micro optimizations to the TX path.
The improvement is measurable, but below 1% of CPU utilization.
Patches 4 - 9 add basic TX offloads to representor devices, like
checksum offload or TSO, and remove the unnecessary TX lock and
Qdisc (our representors are software constructs on top of the PF).
The last 2 patches add more info to error messages - id of command
which failed and exact location of incorrect TLVs, very useful for
debugging.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
FW reconfiguration timeouts are a common indicator of FW trouble.
To make debugging easier print requested update and control word
when reconfiguration fails.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When troubleshooting incorrect FW capabilities it's useful to know
where the faulty TLV is located. Add offset to all errors messages.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FW/HW can generally support the standard networking offloads
on representors without any trouble. Add the ability for FW
to advertise which features should be available on representors.
Because representors are muxed on top of the vNIC we need to listen
on feature changes of their lower devices, and update their features
appropriately.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up until now we never needed to keep a networking locks around
representors accesses, we only accessed them when device was
reconfigured (under nfp pf->lock) or on fast path (under RCU).
Now we want to be able to iterate over all representors during
notifications, so make sure representor assignment is done
under RTNL lock.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our representors are software devices built on top of the PF
vNIC, the queuing should only happen at the vNIC netdevice.
Allow representors to run qdisc-less.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our representors are software devices built on top of the PF
vNIC, the only state they have are per-cpu stats, so make
the TX run locklessly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for TSO over representors make sure the port id
prepend will always fit in the frame. The current max header
length is 255, which is ample, so assume worst case scenario
of 8 byte prepend and save ourselves the conditionals.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TSO-related offsets in the descriptor should not include
the length of the prepended metadata. Adjust them. Note that
this could not have caused issues in the past as we don't
support TSO with metadata prepend as of this patch.
Signed-off-by: Michael Rapson <michael.rapson@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nd_q is only used at the very end of nfp_net_tx(), there is no need
to initialize it early.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move temporary variables in scope of the loop in nfp_net_tx_complete(),
and add a temp for txbuf software structure. This saves us 0.2% of CPU.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chained descriptors for fragments need to duplicate all the descriptor
fields of the skb head, so we copy the descriptor and then modify the
relevant fields. This is wasteful, because the top half of the descriptor
will get overwritten entirely while the bottom half is not modified at all.
Copy only the bottom half. This saves us 0.3% of CPU in a GSO test.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most linux hosts never setup TCP MD5 keys. We can avoid a
cache line miss (accessing tp->md5ig_info) on RX and TX
using a jump label.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: take a bit more care of backlog stress
While working on the SACK compression issue Jean-Louis Dupond
reported, we found that his linux box was suffering very hard
from tail drops on the socket backlog queue.
First patch hints the compiler about sack flows being the norm.
Second patch changes non-sack code in preparation of the ack
compression.
Third patch fixes tcp_space() to take backlog into account.
Fourth patch is attempting coalescing when a new packet must
be added to the backlog queue. Cooking bigger skbs helps
to keep backlog list smaller and speeds its handling when
user thread finally releases the socket lock.
v3: Neal/Yuchung feedback addressed :
Do not aggregate if any skb has URG bit set.
Do not aggregate if the skbs have different ECE/CWR bits
v2: added feedback from Neal : tcp: take care of compressed acks in tcp_add_reno_sack()
added : tcp: hint compiler about sack flows
added : tcp: make tcp_space() aware of socket backlog
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case GRO is not as efficient as it should be or disabled,
we might have a user thread trapped in __release_sock() while
softirq handler flood packets up to the point we have to drop.
This patch balances work done from user thread and softirq,
to give more chances to __release_sock() to complete its work
before new packets are added the the backlog.
This also helps if we receive many ACK packets, since GRO
does not aggregate them.
This patch brings ~60% throughput increase on a receiver
without GRO, but the spectacular gain is really on
1000x release_sock() latency reduction I have measured.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jean-Louis Dupond reported poor iscsi TCP receive performance
that we tracked to backlog drops.
Apparently we fail to send window updates reflecting the
fact that we are under stress.
Note that we might lack a proper window increase when
backlog is fully processed, since __release_sock() clears
sk->sk_backlog.len _after_ all skbs have been processed.
This should not matter in practice. If we had a significant
load through socket backlog, we are in a dangerous
situation.
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Tested-by: Jean-Louis Dupond<jean-louis@dupond.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal pointed out that non sack flows might suffer from ACK compression
added in the following patch ("tcp: implement coalescing on backlog queue")
Instead of tweaking tcp_add_backlog() we can take into
account how many ACK were coalesced, this information
will be available in skb_shinfo(skb)->gso_segs
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tell the compiler that most TCP flows are using SACK these days.
There is no need to add the unlikely() clause in tcp_is_reno(),
the compiler is able to infer it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trace events are already present for the receive entry points, to indicate
how the reception entered the stack.
This patch adds the corresponding exit trace events that will bound the
reception such that all events occurring between the entry and the exit
can be considered as part of the reception context. This greatly helps
for dependency and root cause analyses.
Without this, it is not possible with tracepoint instrumentation to
determine whether a sched_wakeup event following a netif_receive_skb
event is the result of the packet reception or a simple coincidence after
further processing by the thread. It is possible using other mechanisms
like kretprobes, but considering the "entry" points are already present,
it would be good to add the matching exit events.
In addition to linking packets with wakeups, the entry/exit event pair
can also be used to perform network stack latency analyses.
Signed-off-by: Geneviève Bastien <gbastien@versatic.net>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: David S. Miller <davem@davemloft.net>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> (tracing side)
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no such structs flow_dissector_key_flow_vlan or
flow_dissector_key_flow_tags, the actual structs used are struct
flow_dissector_key_vlan and struct flow_dissector_key_tags. So correct the
comments against FLOW_DISSECTOR_KEY_VLAN, FLOW_DISSECTOR_KEY_FLOW_LABEL and
FLOW_DISSECTOR_KEY_CVLAN to refer to those.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Total number of VFs supported by PF is used to determine the last
byte of VF's mac address. Number of VFs supported is not always
16, use the variable nvfs to get the number of VFs supported
rather than hard coding it to 16.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
bpf-next 2018-11-30
The following pull-request contains BPF updates for your *net-next* tree.
(Getting out bit earlier this time to pull in a dependency from bpf.)
The main changes are:
1) Add libbpf ABI versioning and document API naming conventions
as well as ABI versioning process, from Andrey.
2) Add a new sk_msg_pop_data() helper for sk_msg based BPF
programs that is used in conjunction with sk_msg_push_data()
for adding / removing meta data to the msg data, from John.
3) Optimize convert_bpf_ld_abs() for 0 offset and fix various
lib and testsuite build failures on 32 bit, from David.
4) Make BPF prog dump for !JIT identical to how we dump subprogs
when JIT is in use, from Yonghong.
5) Rename btf_get_from_id() to make it more conform with libbpf
API naming conventions, from Martin.
6) Add a missing BPF kselftest config item, from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
During porting libbpf to bcc, I got some warnings like below:
...
[ 2%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf.c:12:0:
warning: "_GNU_SOURCE" redefined [enabled by default]
#define _GNU_SOURCE
...
[ 3%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf_errno.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c: In function ‘libbpf_strerror’:
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c:45:7:
warning: assignment makes integer from pointer without a cast [enabled by default]
ret = strerror_r(err, buf, size);
...
bcc is built with _GNU_SOURCE defined and this caused the above warning.
This patch intends to make libpf _GNU_SOURCE friendly by
. define _GNU_SOURCE in libbpf.c unless it is not defined
. undefine _GNU_SOURCE as non-gnu version of strerror_r is expected.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We can remove the loop and conditional branches
and compute wscale efficiently thanks to ilog2()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_linearization can fail due to memory allocation failure.
In such a case, the driver will drop the packet. In such a case
The driver used to print an error message.
This patch replaces this error message by a dedicated statistic.
Signed-off-by: Michael Shteinbok <michael.shteinbok@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add comments in the switch statement for XDP action to indicate
fallthrough is intended.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi says:
====================
Add suspend/resume support for AVE ethernet driver
This series adds support for suspend/resume to AVE ethernet driver.
And to avoid the error that wol state of phy hardware is enabled by default,
this sets initial wol state to disabled and add preservation the state in
suspend/resume sequence.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the wol state forces to be initialized after reset, the state should
be preserved in suspend/resume sequence.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If wol state of phy hardware is enabled after reset, phy_ethtool_get_wol()
returns that wol.wolopts is true.
However, since net_device.wol_enabled is zero and this doesn't apply wol
state until calling ethtool_set_wol(), so mdio_bus_phy_may_suspend()
returns true, that is, it's in a state where phy can suspend even though
wol state is enabled.
In this inconsistency, phy_suspend() returns -EBUSY, and at last,
suspend sequence fails with the following message:
dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x58 returns -16
PM: Device 65000000.ethernet-ffffffff:01 failed to suspend: error -16
PM: Some devices failed to suspend, or early wake event detected
In order to fix the above issue, this patch forces to set initial wol state
to disabled as default.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces suspend and resume functions to ave driver.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I ended up tracking down some rather nasty issues with f2fs (and other
filesystem modules) constantly crashing on my kernel down to a
combination of out of bounds memory accesses, one of which was coming
from brcmfmac during module load:
[ 30.891382] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[ 30.894437] ==================================================================
[ 30.901581] BUG: KASAN: global-out-of-bounds in brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac]
[ 30.909935] Read of size 1 at addr ffff2000024865df by task kworker/6:2/387
[ 30.916805]
[ 30.918261] CPU: 6 PID: 387 Comm: kworker/6:2 Tainted: G O 4.20.0-rc3Lyude-Test+ #19
[ 30.927251] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[ 30.935964] Workqueue: events brcmf_driver_register [brcmfmac]
[ 30.941641] Call trace:
[ 30.944058] dump_backtrace+0x0/0x3e8
[ 30.947676] show_stack+0x14/0x20
[ 30.950968] dump_stack+0x130/0x1c4
[ 30.954406] print_address_description+0x60/0x25c
[ 30.959066] kasan_report+0x1b4/0x368
[ 30.962683] __asan_report_load1_noabort+0x18/0x20
[ 30.967547] brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac]
[ 30.967639] brcmf_sdio_probe+0x163c/0x2050 [brcmfmac]
[ 30.978035] brcmf_ops_sdio_probe+0x598/0xa08 [brcmfmac]
[ 30.983254] sdio_bus_probe+0x190/0x398
[ 30.983270] really_probe+0x2a0/0xa70
[ 30.983296] driver_probe_device+0x1b4/0x2d8
[ 30.994901] __driver_attach+0x200/0x280
[ 30.994914] bus_for_each_dev+0x10c/0x1a8
[ 30.994925] driver_attach+0x38/0x50
[ 30.994935] bus_add_driver+0x330/0x608
[ 30.994953] driver_register+0x140/0x388
[ 31.013965] sdio_register_driver+0x74/0xa0
[ 31.014076] brcmf_sdio_register+0x14/0x60 [brcmfmac]
[ 31.023177] brcmf_driver_register+0xc/0x18 [brcmfmac]
[ 31.023209] process_one_work+0x654/0x1080
[ 31.032266] worker_thread+0x4f0/0x1308
[ 31.032286] kthread+0x2a8/0x320
[ 31.039254] ret_from_fork+0x10/0x1c
[ 31.039269]
[ 31.044226] The buggy address belongs to the variable:
[ 31.044351] brcmf_firmware_path+0x11f/0xfffffffffffd3b40 [brcmfmac]
[ 31.055601]
[ 31.057031] Memory state around the buggy address:
[ 31.061800] ffff200002486480: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[ 31.068983] ffff200002486500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.068993] >ffff200002486580: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00
[ 31.068999] ^
[ 31.069017] ffff200002486600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.096521] ffff200002486680: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
[ 31.096528] ==================================================================
[ 31.096533] Disabling lock debugging due to kernel taint
It appears that when trying to determine the length of the string in the
alternate firmware path, we make the mistake of not handling the case
where the firmware path is empty correctly. Since strlen(mp_path) can
return 0, we'll end up accessing mp_path[-1] when the firmware_path
isn't provided through the module arguments.
So, fix this by just setting the end char to '\0' by default, and only
changing it if we have a non-zero length. Additionally, use strnlen()
with BRCMF_FW_ALTPATH_LEN instead of strlen() just to be extra safe.
Fixes: 2baa3aaee2 ("brcmfmac: introduce brcmf_fw_alloc_request() function")
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Arend Van Spriel <arend.vanspriel@broadcom.com>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Dan Haab <dhaab@luxul.com>
Cc: Jia-Shyr Chuang <saint.chuang@cypress.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ARM systems with UEFI may have both devicetree (of) and DMI data in this
case we end up setting brcmf_mp_device.board_type twice.
In this case we should prefer the devicetree data, because:
1) The devicerree data is more reliable
2) Some ARM systems (e.g. the Raspberry Pi 3 models) support both UEFI and
classic uboot booting, the devicetree data is always there, so using it
makes sure we ask for the same nvram file independent of how we booted.
This commit moves the brcmf_dmi_probe call to before the brcmf_of_probe
call, so that the latter can override the value of the first if both are
set.
Fixes: bd1e82bb42 ("brcmfmac: Set board_type from DMI on x86 based ...")
Cc: Peter Robinson <pbrobinson@gmail.com>
Tested-and-reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The newest firmwares provide STA info using v7 of the struct. As v7
isn't backward compatible, a union is needed.
Even though brcmfmac does not use any of the new info it's important to
provide the proper struct buffer. Without this change new firmwares will
fallback to the very limited v3 instead of something in between such as
v4.
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Kernel library has a common cordic algorithm which is identical
to internally implemented one, so use it and drop the duplicate
implementation.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The cordic routine for calculating sines and cosines that was added in
commit 6f98e62a9f ("b43: update cordic code to match current specs")
contains an error whereby a quantity declared u32 can in fact go negative.
This problem was detected by Priit Laes who is switching b43 to use the
routine in the library functions of the kernel.
Fixes: 9865045403 ("b43: make cordic common (LP-PHY and N-PHY need it)")
Reported-by: Priit Laes <plaes@plaes.org>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Stable <stable@vger.kernel.org> # 2.6.34
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Current driver includes macro that is available from general cordic
library. Use that and drop unused duplicate and unneeded internal
definitions.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Now that these macros are in header file, we can eventually
clean up the duplicate macros present in the drivers that
utilize the same cordic algorithm implementation.
Also add CORDIC_ prefix to nonprefixed macros.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* New FW debugging infrastructure;
* Some more work on 802.11ax;
* Improve support for multiple RF modules with 22000 devices;
* Remove an unused FW parameter;
* Other debugging improvements;
-----BEGIN PGP SIGNATURE-----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=8wf1
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2018-11-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
second batch of iwlwifi patches intended for v4.21
* New FW debugging infrastructure;
* Some more work on 802.11ax;
* Improve support for multiple RF modules with 22000 devices;
* Remove an unused FW parameter;
* Other debugging improvements;
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEENrCndlB/VnAEWuH5k9IU1zQoZfEFAlv+uhcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCT0hTXNChl8Q67B/4k/6WVMEssFStSEpC9asrqQs0Itra3
+eIiXrzGfpzO/Gg1O4LV2xUt7JzgLgRa8BBPH8wk+Q/QMOYZsP0qkocb2SWI+J31
JfJGa50l+Beyj8UdeLqZRt62cKCQIBXRaZ4O12ugGYNeQotFsSg4bFa1Gk9aW8Ke
YZT2zYTgD1yaQpBnUcbwnzJEf58vVjgH8zocpm40hlqsUKOJeHoAqUfyfj5RPioX
w9HAc/nDmsHAt32O650poJ851RK2dMNDTSKtUxKTH+nPI7HzdB5HXvlPFpHAf2SC
BrPYUJIOJGPLzhfTRTwAFCfM5C8/y/FtR0GD9vEctVDjSIrcH72aOnre
=NA7B
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.21-20181128' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
This is a pull request for net-next/master consisting of 18 patches.
The first patch is by Colin Ian King and fixes the spelling in the ucan
driver.
The next three patches target the xilinx driver. YueHaibing's patch
fixes the return type of ndo_start_xmit function. Two patches by
Shubhrajyoti Datta add support for the CAN FD 2.0 controllers.
Flavio Suligoi's patch for the sja1000 driver add support for the ASEM
CAN raw hardware.
Wolfram Sang's and Kuninori Morimoto's patches switch the rcar driver to
use SPDX license identifiers.
The remaining 111 patches improve the flexcan driver. Pankaj Bansal's
patch enables the driver in Kconfig on all architectures with IOMEM
support. The next four patches by me fix indention, add missing
parentheses and comments. Aisheng Dong's patches add self wake support
and document it in the DT bindings. The remaining patches by Pankaj
Bansal first fix the loopback support and prepare the driver for the
CAN-FD support needed for the LX2160A SoC. The actual CAN-FD support
will be added in a later patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cannot cast a u64 to a pointer on 32-bit without an intervening (long)
cast otherwise GCC warns.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CONFIG_FTRACE_SYSCALLS=y is required for get_cgroup_id_user test case
this test reads a file from debug trace path
/sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
John Fastabend says:
====================
After being able to add metadata to messages with sk_msg_push_data we
have also found it useful to be able to "pop" this metadata off before
sending it to applications in some cases. This series adds a new helper
sk_msg_pop_data() and the associated patches to add tests and tools/lib
support.
Thanks!
v2: Daniel caught that we missed adding sk_msg_pop_data to the changes
data helper so that the verifier ensures BPF programs revalidate
data after using this helper. Also improve documentation adding a
return description and using RST syntax per Quentin's comment. And
delta calculations for DROP with pop'd data (albeit a strange set
of operations for a program to be doing) had potential to be
incorrect possibly confusing user space applications, so fix it.
====================
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Similar to msg_pull_data and msg_push_data add a set of options to
have msg_pop_data() exercised.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the necessary header definitions to tools for new
msg_pop_data_helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds a BPF SK_MSG program helper so that we can pop data from a
msg. We use this to pop metadata from a previous push data call.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
