Commit Graph

17 Commits

Author SHA1 Message Date
Peter Zijlstra
faa4602e47 x86, perf, bts, mm: Delete the never used BTS-ptrace code
Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-26 11:33:55 +01:00
Frederic Weisbecker
c2c5d45d46 perf: Stop stack frame walking off kernel addresses boundaries
While processing kernel perf callchains, an bad entry can be
considered as a valid stack pointer but not as a kernel address.

In this case, we hang in an endless loop. This can happen in an
x86-32 kernel after processing the last entry in a kernel
stacktrace.

Just stop the stack frame walking after we encounter an invalid
kernel address.

This fixes a hard lockup in x86-32.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262227945-27014-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 09:32:54 +01:00
Frederic Weisbecker
06d65bda75 perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker
It's just wasteful for stacktrace users like perf to walk
through every entries on the stack whereas these only accept
reliable ones, ie: that the frame pointer validates.

Since perf requires pure reliable stacktraces, it needs a stack
walker based on frame pointers-only to optimize the stacktrace
processing.

This might solve some near-lockup scenarios that can be triggered
by call-graph tracing timer events.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261024834-5336-2-git-send-regression-fweisbec@gmail.com>
[ v2: fix for modular builds and small detail tidyup ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-17 10:42:52 +01:00
Frederic Weisbecker
61c1917f47 perf events, x86/stacktrace: Make stack walking optional
The current print_context_stack helper that does the stack
walking job is good for usual stacktraces as it walks through
all the stack and reports even addresses that look unreliable,
which is nice when we don't have frame pointers for example.

But we have users like perf that only require reliable
stacktraces, and those may want a more adapted stack walker, so
lets make this function a callback in stacktrace_ops that users
can tune for their needs.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-17 09:56:19 +01:00
Thomas Gleixner
0199c4e68d locking: Convert __raw_spin* functions to arch_spin*
Name space cleanup. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
edc35bd72e locking: Rename __RAW_SPIN_LOCK_UNLOCKED to __ARCH_SPIN_LOCK_UNLOCKED
Further name space cleanup. No functional change

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
445c89514b locking: Convert raw_spinlock to arch_spinlock
The raw_spin* namespace was taken by lockdep for the architecture
specific implementations. raw_spin_* would be the ideal name space for
the spinlocks which are not converted to sleeping locks in preempt-rt.

Linus suggested to convert the raw_ to arch_ locks and cleanup the
name space instead of using an artifical name like core_spin,
atomic_spin or whatever

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
H. Peter Anvin
a343c75d33 x86: use kernel_stack_pointer() in dumpstack.c
The way to obtain a kernel-mode stack pointer from a struct pt_regs in
32-bit mode is "subtle": the stack doesn't actually contain the stack
pointer, but rather the location where it would have been marks the
actual previous stack frame.  For clarity, use kernel_stack_pointer()
instead of coding this weirdness explicitly.

Furthermore, user_mode() is only valid when the process is known to
not run in V86 mode.  Use the safer user_mode_vm() instead.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-10-12 14:19:34 -07:00
Huang Weiyi
e90476d3ba x86: Remove duplicated #include
Remove duplicated #include in:

  arch/x86/kernel/dumpstack.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 10:17:08 +02:00
Kurt Garloff
5211a242d0 x86: Add sysctl to allow panic on IOCK NMI error
This patch introduces a new sysctl:

    /proc/sys/kernel/panic_on_io_nmi

which defaults to 0 (off).

When enabled, the kernel panics when the kernel receives an NMI
caused by an IO error.

The IO error triggered NMI indicates a serious system
condition, which could result in IO data corruption. Rather
than contiuing, panicing and dumping might be a better choice,
so one can figure out what's causing the IO error.

This could be especially important to companies running IO
intensive applications where corruption must be avoided, e.g. a
bank's databases.

[ SuSE has been shipping it for a while, it was done at the
  request of a large database vendor, for their users. ]

Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Roberto Angelino <robertangelino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <20090624213211.GA11291@kroah.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 22:06:11 +02:00
Ingo Molnar
f0ef039851 Merge branch 'x86/core' into tracing/textedit
Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 16:45:01 +01:00
Ingo Molnar
4cd0332db7 Merge branch 'mainline/function-graph' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/function-graph-tracer 2009-02-19 12:13:33 +01:00
Steven Rostedt
712406a6bf tracing/function-graph-tracer: make arch generic push pop functions
There is nothing really arch specific of the push and pop functions
used by the function graph tracer. This patch moves them to generic
code.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-18 13:43:04 -05:00
Arjan van de Ven
2c344e9d6e x86: don't pretend that non-framepointer stack traces are reliable
Without frame pointers enabled, the x86 stack traces should not
pretend to be reliable; instead they should just be what they are:
unreliable.

The effect of this is that they have a '?' printed in the stacktrace,
to warn the reader that these entries are guesses rather than known
based on more reliable information.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 09:45:29 +01:00
Markus Metzger
b1818748b0 x86, ftrace, hw-branch-tracer: dump trace on oops
Dump the branch trace on an oops (based on ftrace_dump_on_oops).

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 13:03:48 +01:00
Steven Rostedt
7ee991fbc6 ftrace: print real return in dumpstack for function graph
Impact: better dumpstack output

I noticed in my crash dumps and even in the stack tracer that a
lot of functions listed in the stack trace are simply
return_to_handler which is ftrace graphs way to insert its own
call into the return of a function.

But we lose out where the actually function was called from.

This patch adds in hooks to the dumpstack mechanism that detects
this and finds the real function to print. Both are printed to
let the user know that a hook is still in place.

This does give a funny side effect in the stack tracer output:

        Depth   Size      Location    (80 entries)
        -----   ----      --------
  0)     4144      48   save_stack_trace+0x2f/0x4d
  1)     4096     128   ftrace_call+0x5/0x2b
  2)     3968      16   mempool_alloc_slab+0x16/0x18
  3)     3952     384   return_to_handler+0x0/0x73
  4)     3568    -240   stack_trace_call+0x11d/0x209
  5)     3808     144   return_to_handler+0x0/0x73
  6)     3664    -128   mempool_alloc+0x4d/0xfe
  7)     3792     128   return_to_handler+0x0/0x73
  8)     3664     -32   scsi_sg_alloc+0x48/0x4a [scsi_mod]

As you can see, the real functions are now negative. This is due
to them not being found inside the stack.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:25 +01:00
Neil Horman
878719e831 x86: unify appropriate bits from dumpstack_32 and dumpstack_64
Impact: cleanup

As promised, now that dumpstack_32 and dumpstack_64 have so many bits
in common, we should merge the in-sync bits into a common file, to
prevent them from diverging again.

This patch removes bits which are common between dumpstack_32.c and
dumpstack_64.c and places them in a common dumpstack.c which is built
for both 32 and 64 bit arches.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/dumpstack.c    |  319 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/dumpstack.h    |   39 +++++
 arch/x86/kernel/dumpstack_32.c |  294 -------------------------------------
 arch/x86/kernel/dumpstack_64.c |  285 ------------------------------------
 5 files changed, 363 insertions(+), 576 deletions(-)
2008-10-27 19:21:19 +01:00