[Why]
support i2c transition event log
[How]
refined aux REQ and REP events in aux flow.
commented REQ and REP events in i2c flow.
note: i2c event log is currently commented out. more work is required
to find an portocol parser to and generate event for the parser
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clock sources currently have support for asic specific
function pointers. But actual separation into functions
was never performed, leaving us with giant functions that
rely on switch.
This change creates separate functions, removing switch use.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were not providing the correct pixel clocks to DML for marks
calculation.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat them all as Raven rather than adding a new picasso
asic type. This simplifies a lot of code and also handles the
case of rv2 chips with the 0x15d8 pci id. It also fixes dmcu
fw handling for picasso.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read the version number from the common firmware header and store
it in the dm struct
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DRM_AMD_DC_DCN1_01 config flag for Raven2
v2: Make DC select DRM_AMD_DC_DCN1_01 (Alex)
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Raven2 definitions in the dc code
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for picasso to the display manager.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
After GPU reset pflip completion IRQ is disabled and hence
any subsequent mode set or plane update leads to hang.
Fix:
Unless acrtc->otg_inst is initialized to -1 during display
block initializtion then durng resume from GPU reset
amdgpu_irq_gpu_reset_resume_helper will override CRTC 0 pflip
IRQ value with whatever value was on every other unused CRTC because
dm_irq_state will do irq_source = dal_irq_type + acrtc->otg_inst
where acrtc->otg_inst will be 0 for every unused CRTC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c:771:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: e498eb7136 ("drm/amd/display: Add support for hw_state logging via debugfs")
CC: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
DC is already fully equipped to initialize DMCU as long as the
firmware is loaded.
At the moment only the raven firmware is available.
A single .bin file is loaded by the kernel's loading mechanism
and split into two ucodes according to the header.
DMCU is optional, so if the firmware is not found, no error or
warning is raised.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Existing debug dump are all invariant, new “low 32-bit of address”
dump is not invariant
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are same purpose transition events.
[How]
remove the redundant event log.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The extraneous call to amdgpu_pm_compute_clocks is deprecated.
[How]
Remove it.
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Virtual sink is used when set mode happens on a disconnected display
to allow the mode set to proceed. This did not work with MST because
the logic for acquiring stream encoder uses stream signal to determine
the special handling is required, and stream signal is virtual instead
of DP in this case.
[How]
Use link type to decide instead.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The i2c and aux engines are similar, and should be placed
next to eachother for readability
[How]
Reorder the elements of the resource_pool struct
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Our implementation is functionally identical to DRM's
Note that instead of checking if the provided id is 0, the helper
follows through with the mode object search. However, It will still
return NULL, since 0 is not a valid object id, and missed searches
will return NULL.
[How]
Remove our implementation, and replace it with
drm_atomic_helper_best_encoder.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
AMD Stoney reference board, there are only 2 pipes (not include
underlay), and 3 connectors. resource creation, only
2 I2C/AUX engines are created. Within dc_link_aux_transfer, when
pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL.
NULL point is referred later causing system crash.
[how]
each asic design has fixed number of ddc engines at hw side.
for each ddc engine, create its i2x/aux engine at sw side.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some display need disconnect delay. Adding this parameter for future use
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although 4 unique register values exist for gamma modes, two are
actually the same (the two RAMs) It’s not possible for caller to
understand this HW specific behavior, so some parsing is necessary
in driver
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]Update Code to get DTN golden log check to pass for tests run after
DAL217 tests.
[How]Change how dcn10_log_hw_state function prints HW state info
(CM_GAMUT_REMAP_Cx_Cx registers) when GAMUT REMAP is in bypass mode.
Signed-off-by: Gary Kattan <gary.kattan@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We currently lock modeset by setting a boolean in dm. We want to lock
Based on what DC tells us.
[How]
Build stream_updates and plane_update based on what changed. Then we
call check_update_surfaces_for_stream() to get the update type
We lock only if update_type is not fast
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dce_i2c_hw code contained four funtcions that were only
called in one place and did not have a clearly delineated
purpose.
[How]
Inline these functions, keeping the same functionality.
This is not a functional change.
The functions disable_i2c_hw_engine and release_engine_dce_hw were
pulled into their respective callers.
The most interesting part of this change is the acquire functions.
dce_i2c_hw_engine_acquire_engine was pulled into
dce_i2c_engine_acquire_hw, and dce_i2c_engine_acquire_hw was pulled
into acquire_i2c_hw_engine.
Some notes to show that this change is not functional:
-Failure conditions in any function resulted in a cascade of calls that
ended in a 'return NULL'.
Those are replaced with a direct 'return NULL'.
-The variable result is the one from dce_i2c_hw_engine_acquire_engine.
The boolean result used as part of return logic was removed.
-As the second half of dce_i2c_hw_engine_acquire_engine is only executed
if that function is returning true and therefore exiting the do-while
loop in dce_i2c_engine_acquire_hw, those lines were moved outside
of the loop.
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On PCO and up, whenever SMU receive message to indicate active
display count = 0. SMU will turn off 48MHZ TMDP reference clock
by writing to 1 TMDP_48M_Refclk_Driver_PWDN. Once this clock is
off, no PHY register will respond to register access. This means
our current sequence of notifying display count along with requesting
clock will cause driver to hang when accessing PHY registers after
displays count goes to 0.
[How]
Separate the PPSMC_MSG_SetDisplayCount message from the SMU messages
that request clocks, have display own sequencing of this message so
that we can send it at the appropriate time.
Do not redundantly power off HW when entering S3, S4, since display
should already be called to disable all streams. And ASIC soon be
powered down.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The i2c code contains two structs that contain the same
information as i2c_payload
[How]
Replace references to those structs with references to
i2c_payload
dce_i2c_transaction_request->status was written to but never read,
so all references to it are removed
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Logging hardware state can be done by triggering a write to the
debugfs file. It would also be useful to be able to read the hardware
state from the debugfs file to be able to generate a clean log without
timestamps.
[How]
Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log
Threading is an obvious concern when dealing with multiple debugfs
operations and blocking on global state in dm or dc seems unfavorable.
Adding an extra parameter for the debugfs log context state is the
implementation done here. Existing code that made use of DTN_INFO
and its associated macros needed to be refactored to support this.
We don't know the size of the log in advance so it reallocates the
log string dynamically. Once the log has been generated it's copied
into the user supplied buffer for the debugfs. This allows for seeking
support but it's worth nothing that unlike triggering output via
dmesg the hardware state might change in-between reads if your buffer
size is too small.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Good spelling and grammar makes comments
more pleasant and clearer.
Linux has coding standards for comments
that we should try to follow.
[How]
Fix obvious spelling and grammar issues
Ensure all comments use '/*' and '*/' and multi-line comments
follow linux convention
Remove line-of-stars comments that do not separate sections
of code and comments referring to lines of code that have
since been removed
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is currently an intermittent hang from a memory leak in
DTN stress testing. It is caused by unfreed memory during driver
disable.
[How]
Do a dc_sink_release in the case that skips it incorrectly.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Now that we "scale" time delays correctly on Maximus (as of diags svn
r170115), the forced "35 ms" wait time now becomes 35 ms * 500 = 17.5
seconds, which is far too long. Even having to repeat polling a
register once causes excessive delays on Maximus.
[How]
Just use the regular wait time passed to the generic_reg_wait()
function. This is sufficient for Maximus now, and it also means that
there's one less "Maximus-only" code path in DAL.
Also disable the "REG_WAIT taking a while:" message on Maximus, since
things do take a while longer there and 1-2ms delays are not uncommon
(and nothing to worry about).
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We have logging methods for printing hardware state for newer ASICs
but no way to trigger the log output.
[How]
Add support for triggering the output via writing to a debugfs file
entry. Log output currently goes into dmesg for convenience, but
accessing via a read should be possible later.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_handle_vblank is deprecated. Use drm_crtc_handle_vblank instead.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function pointers of the dce_i2c_hw struct were never
accessed from outside dce_i2c_hw.c and had only one version.
As function pointers take up space and make debugging difficult,
and they are not needed in this case, they should be removed.
[How]
Remove the dce_i2c_hw_funcs struct and make static all
functions that were previously a part of it. Reorder
the functions in dce_i2c_hw.c.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds support for LVDS displays.
v2: add support for spread spectrum, sink detect
v3: clean up enable_lvds_output
v4: fix up link_detect
v5: remove assert on 888 format
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The if statement isn't indented and it makes static checkers complain.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix comile warning like,
CC [M] drivers/gpu/drm/i915/gvt/execlist.o
CC [M] drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.o
CC [M] drivers/gpu/drm/radeon/btc_dpm.o
CC [M] drivers/isdn/hisax/avm_a1p.o
CC [M] drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_dpp.o
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In function ‘dcn10_update_mpcc’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1903:9: warning: missing braces around initializer [-Wmissing-braces]
struct mpcc_blnd_cfg blnd_cfg = {0};
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1903:9: warning: (near initialization for ‘blnd_cfg.black_color’) [-Wmissing-braces]
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Existing DTN infrastructure in driver is hacky. It uses implicit log
names, and also incorrect escape ID.
[how]
- Implement using generic DTN escape ID.
- Move file logging functionality from driver to to script; driver now outputs to string/buffer
- Move HWSS debug functionality to separate c file
- Add debug functionalty for per-block logging as CSV
- Add pretty print in python
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During S4/S3 stress test it is possible to resume from S4 without
calling mode set on eDP, meaning high level optimization flag is not
reset. If this is followed by an S3 resume call, driver will see
optimization flag is set and consume it and think backend is powered
on when in fact it is not.
This results in PHY being off in sequence where
S4->Resume->S3->Resume->ApplyOpt->black screen.
[How]
Move optimization flag to stream instead of a DC flag.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are two versions of the hw function pointers: one for dce80
and one for all other versions. These paired functions are
nearly identical. dce80 and dce100 should not require
different i2c access functions.
[How]
Combine each pair of functions into a single function. Mostly
the new functions are based on the dce100 versions as those
versions are newer, support more features, and
were more maintained.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define register for dcn10 for future changes
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add csc_transform struct to dc_stream_update, and program if set when
updating streams
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
I2C code did not match dc resource model and was generally
unpleasant
[How]
Move code into new svelte dce_i2c files, replacing various i2c
objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split
sw and hw code paths. Remove all redundant declarations. Use
address lists to distinguish between versions. Change dce80 code
to newer register access macros.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gamut remap to dc_stream_update struct, and program if set when updating
streams.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
