mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 23:53:45 +07:00
c1887159eb
869 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Rafael J. Wysocki
|
d491f2b752 |
PCI: PM: Avoid possible suspend-to-idle issue
If a PCI driver leaves the device handled by it in D0 and calls
pci_save_state() on the device in its ->suspend() or ->suspend_late()
callback, it can expect the device to stay in D0 over the whole
s2idle cycle. However, that may not be the case if there is a
spurious wakeup while the system is suspended, because in that case
pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
which calls pci_restore_state(), via pci_pm_default_resume_early(),
so state_saved is cleared and the second iteration of
pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
may change the power state of the device.
To avoid that, add a new internal flag, skip_bus_pm, that will be set
by pci_pm_suspend_noirq() when it runs for the first time during the
given system suspend-resume cycle if the state of the device has
been saved already and the device is still in D0. Setting that flag
will cause the next iterations of pci_pm_suspend_noirq() to set
state_saved for pci_pm_resume_noirq(), so that it always restores the
device state from the originally saved data, and avoid calling
pci_prepare_to_sleep() for the device.
Fixes:
|
||
|
Linus Torvalds
|
414147d99b |
pci-v5.2-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlzZ/4MUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vwmYw/+Mzkkz/zOpzYdsYyy6Xv3qRdn92Kp
bePOPACdwpUK+HV4qE6EEYBcVZdkO7NMkshA7wIb4VlsE0sVHSPvlybUmTUGWeFd
CG87YytVOo4K7cAeKdGVwGaoQSeaZX3wmXVGGQtm/T4b63GdBjlNJ/MBuPWDDMlM
XEis29MTH6xAu3MbT7pp5q+snSzOmt0RWuVpX/U1YcZdhu8fbwfOxj9Jx6slh4+2
MvseYNNrTRJrMF0o5o83Khx3tAcW8OTTnDJ9+BCrAlE1PId1s/KjzY6nqReBtom9
CIqtwAlx/wGkRBRgfsmEtFBhkDA05PPilhSy6k2LP8B4A3qBqir1Pd+5bhHG4FIu
nPPCZjZs2+0DNrZwQv59qIlWsqDFm214WRln9Z7d/VNtrLs2UknVghjQcHv7rP+K
/NKfPlAuHTI/AFi9pIPFWTMx5J4iXX1hX4LiptE9M0k9/vSiaCVnTS3QbFvp3py3
VTT9sprzfV4JX4aqS/rbQc/9g4k9OXPW9viOuWf5rYZJTBbsu6PehjUIRECyFaO+
0gDqE8WsQOtNNX7e5q2HJ/HpPQ+Q1IIlReC+1H56T/EQZmSIBwhTLttQMREL/8af
Lka3/1SVUi4WG6SBrBI75ClsR91UzE6AK+h9fAyDuR6XJkbysWjkyG6Lmy617g6w
lb+fQwOzUt4eGDo=
=4Vc+
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration changes:
- Add _HPX Type 3 settings support, which gives firmware more
influence over device configuration (Alexandru Gagniuc)
- Support fixed bus numbers from bridge Enhanced Allocation
capabilities (Subbaraya Sundeep)
- Add "external-facing" DT property to identify cases where we
require IOMMU protection against untrusted devices (Jean-Philippe
Brucker)
- Enable PCIe services for host controller drivers that use managed
host bridge alloc (Jean-Philippe Brucker)
- Log PCIe port service messages with pci_dev, not the pcie_device
(Frederick Lawler)
- Convert pciehp from pciehp_debug module parameter to generic
dynamic debug (Frederick Lawler)
Peer-to-peer DMA:
- Add whitelist of Root Complexes that support peer-to-peer DMA
between Root Ports (Christian König)
Native controller drivers:
- Add PCI host bridge DMA ranges for bridges that can't DMA
everywhere, e.g., iProc (Srinath Mannam)
- Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
Chocron)
- Fix Tegra MSI target allocation so DMA doesn't generate unwanted
MSIs (Vidya Sagar)
- Fix of_node reference leaks (Wen Yang)
- Fix Hyper-V module unload & device removal issues (Dexuan Cui)
- Cleanup R-Car driver (Marek Vasut)
- Cleanup Keystone driver (Kishon Vijay Abraham I)
- Cleanup i.MX6 driver (Andrey Smirnov)
Significant bug fixes:
- Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
Paul)
- Fix Switchtec firmware update performance issue (Wesley Sheng)
- Work around Pericom switch link retraining erratum (Stefan Mätje)"
* tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits)
MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
PCI: pciehp: Remove pointless MY_NAME definition
PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
PCI: pciehp: Log messages with pci_dev, not pcie_device
PCI: pciehp: Replace pciehp_debug module param with dyndbg
PCI: pciehp: Remove pciehp_debug uses
PCI/AER: Log messages with pci_dev, not pcie_device
PCI/DPC: Log messages with pci_dev, not pcie_device
PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
PCI: Replace printk(KERN_INFO) with pr_info(), etc
PCI: Use dev_printk() when possible
PCI: Cleanup setup-bus.c comments and whitespace
PCI: imx6: Allow asynchronous probing
PCI: dwc: Save root bus for driver remove hooks
PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
PCI: dwc: Free MSI in dw_pcie_host_init() error path
PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
...
|
||
|
Bjorn Helgaas
|
f2e9468316 |
Merge branch 'pci/iova-dma-ranges'
- Add list of legal DMA address ranges to PCI host bridge (Srinath
Mannam)
- Reserve inaccessible DMA ranges so IOMMU doesn't allocate them (Srinath
Mannam)
- Parse iProc DT dma-ranges to learn what PCI devices can reach via DMA
(Srinath Mannam)
* pci/iova-dma-ranges:
PCI: iproc: Add sorted dma ranges resource entries to host bridge
iommu/dma: Reserve IOVA for PCIe inaccessible DMA address
PCI: Add dma_ranges window list
# Conflicts:
# drivers/pci/probe.c
|
||
|
Bjorn Helgaas
|
09fdd75c18 |
Merge branch 'pci/misc'
- Mark expected switch fall-throughs (Gustavo A. R. Silva)
- Remove unused pci_request_region_exclusive() (Johannes Thumshirn)
- Fix x86 PCI IRQ routing table memory leak (Wenwen Wang)
- Reset Lenovo ThinkPad P50 if firmware didn't do it on reboot (Lyude
Paul)
- Add and use pci_dev_id() helper to simplify PCI_DEVID() usage (touches
several places outside drivers/pci/) (Heiner Kallweit)
- Transition Mobiveil PCI maintenance to Karthikeyan M and Hou Zhiqiang
(Subrahmanya Lingappa)
* pci/misc:
MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
platform/chrome: chromeos_laptop: use pci_dev_id() helper
stmmac: pci: Use pci_dev_id() helper
iommu/vt-d: Use pci_dev_id() helper
iommu/amd: Use pci_dev_id() helper
drm/amdkfd: Use pci_dev_id() helper
powerpc/powernv/npu: Use pci_dev_id() helper
r8169: use pci_dev_id() helper
PCI: Add pci_dev_id() helper
PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary
x86/PCI: Fix PCI IRQ routing table memory leak
PCI: Remove unused pci_request_region_exclusive()
PCI: Mark expected switch fall-throughs
|
||
|
Linus Torvalds
|
a13f065550 |
IOMMU Updates for Linux v5.2
Including: - ATS support for ARM-SMMU-v3. - AUX domain support in the IOMMU-API and the Intel VT-d driver. This adds support for multiple DMA address spaces per (PCI-)device. The use-case is to multiplex devices between host and KVM guests in a more flexible way than supported by SR-IOV. - The Rest are smaller cleanups and fixes, two of which needed to be reverted after testing in linux-next. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAlzZWPkACgkQK/BELZcB GuPdRRAAj/RcgVn7fqmNDM02xe6C5PuwBGYkXnC+atDrTQWbFsM0JE3YTWEHJ+66 7RMoYaksRaSBsn3QuX3b6+g6E+exhGoQ0BfkmuF8StUXAsaxvzGxvuk+cP0o4/mK pZkj3BddS4ycRqQPsVEbgJGRzL39dxWHe7p3/FfwgV+HzVonURFozU0HixLAoBhr uS0LpBiG8uGCMvO6yhTmPmfrbsSAcMivb7LlmsaykXPhjBk7kSqNgHNNx5O+HC8m XJdFatkxolkrN6A2FoHdP05sAXCv+uHbAGGGitYziRaXG7GBzm7Vc2LspJIml+y2 898+MiTH1M3P0WPyDa3cfcnRc2BBuJg56emad4CcfduM9sVXI0Ol6slNAYljnSYD 5A0CUxbrLxGUZaf6DAUJ9w5L+LhgEkXzKWEE9Nif46K4I1CFSt/d8nwB6Q5Oc/ie GZwTICRkMwTeqOM/CTyvwJCCwZm47AVv3qwaI0z5oDplH/bbRmNEi5WFJsgcgOnd GS5kmzjFBsljjDVWswgugdm7sdMSl7y88uQK9zUiG8fXgRiVUW/rENfZ1SMmVl1p zBQDndZmtrHm5ybe/NAZ8vaJhk4i1F3rWT0hwRZZKGDIrd/C3egnNyYkc4XeTPGe 3il+dJleIIwOX5Fpa44XTV1rDuVOXpF5LS5NRLjhhd+XqbaXZFI= =HLtu -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - ATS support for ARM-SMMU-v3. - AUX domain support in the IOMMU-API and the Intel VT-d driver. This adds support for multiple DMA address spaces per (PCI-)device. The use-case is to multiplex devices between host and KVM guests in a more flexible way than supported by SR-IOV. - the rest are smaller cleanups and fixes, two of which needed to be reverted after testing in linux-next. * tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits) Revert "iommu/amd: Flush not present cache in iommu_map_page" Revert "iommu/amd: Remove the leftover of bypass support" iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU iommu/vt-d: Set intel_iommu_gfx_mapped correctly iommu/amd: Flush not present cache in iommu_map_page iommu/vt-d: Cleanup: no spaces at the start of a line iommu/vt-d: Don't request page request irq under dmar_global_lock iommu/vt-d: Use struct_size() helper iommu/mediatek: Fix leaked of_node references iommu/amd: Remove amd_iommu_pd_list iommu/arm-smmu: Log CBFRSYNRA register on context fault iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel iommu/arm-smmu-v3: Disable tagged pointers iommu/arm-smmu-v3: Add support for PCI ATS iommu/arm-smmu-v3: Link domains and devices iommu/arm-smmu-v3: Add a master->domain pointer iommu/arm-smmu-v3: Store SteamIDs in master iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master ACPI/IORT: Check ATS capability in root complex nodes ... |
||
|
Srinath Mannam
|
e80a91ad30 |
PCI: Add dma_ranges window list
Add a dma_ranges field in PCI host bridge structure to hold resource entries list of memory regions in sorted order representing memory ranges that can be accessed through DMA transactions. Based-on-a-patch-by: Oza Pawandeep <oza.oza@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Oza Pawandeep <poza@codeaurora.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Heiner Kallweit
|
4e544bac82 |
PCI: Add pci_dev_id() helper
In several places in the kernel we find PCI_DEVID used like this: PCI_DEVID(dev->bus->number, dev->devfn) Add a "pci_dev_id(struct pci_dev *dev)" helper to simplify callers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Jean-Philippe Brucker
|
b9ae16d80a |
PCI: Add a stub for pci_ats_disabled()
Currently pci_ats_disabled() is only defined when CONFIG_PCI is enabled. Since we're about to use the function in the Arm SMMUv3 driver, which could be built with CONFIG_PCI disabled, add a definition of pci_ats_disabled() for !CONFIG_PCI. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Jean-Philippe Brucker
|
6e1ffbb7c2 |
PCI: Move ATS declarations outside of CONFIG_PCI
At the moment, the ATS functions are only defined when CONFIG_PCI is enabled. Since we're about to use them in the Arm SMMUv3 driver, which could be built with CONFIG_PCI disabled, and they are already guarded by CONFIG_PCI_ATS which depends on CONFIG_PCI, move the definitions outside of CONFIG_PCI. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Bjorn Helgaas
|
a88a7b3eb0 |
vfio: Use dev_printk() when possible
Use dev_printk() when possible to make messages consistent with other device-related messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> |
||
|
Johannes Thumshirn
|
804ee5be63 |
PCI: Remove unused pci_request_region_exclusive()
pci_request_region_exclusive() was introduced with commit
|
||
|
Stefan Mätje
|
4ec73791a6 |
PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum
Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode (conventional PCI on primary side, PCIe on downstream side), the Retrain Link bit needs to be cleared manually to allow the link training to complete successfully. If it is not cleared manually, the link training is continuously restarted and no devices below the PCI-to-PCIe bridge can be accessed. That means drivers for devices below the bridge will be loaded but won't work and may even crash because the driver is only reading 0xffff. See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL, PI7C9X130. Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected devices set this bit. Note that pcie_retrain_link() lives in aspm.c because that's currently the only place we use it, but this erratum is not specific to ASPM, and we may retrain links for other reasons in the future. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> [bhelgaas: apply regardless of CONFIG_PCIEASPM] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: stable@vger.kernel.org |
||
|
Linus Torvalds
|
bb97be23db |
IOMMU Updates for Linux v5.1
Including: - A big cleanup and optimization patch-set for the Tegra GART driver - Documentation updates and fixes for the IOMMU-API - Support for page request in Intel VT-d scalable mode - Intel VT-d dma_[un]map_resource() support - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel VT-d to align with the latest version of the ATS spec - Relaxed IRQ source checking in the Intel VT-d driver for some aliased devices, needed for future devices which send IRQ messages from more than on request-ID - IRQ remapping driver for Hyper-V - Patches to make generic IOVA and IO-Page-Table code usable outside of the IOMMU code - Various other small fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAlyCNlIACgkQK/BELZcB GuNDiRAAscgYj0BdqpZVUNHl4PySR12QJpS1myl/OC4HEbdB/EOh+bYT4Q1vptCU GNK6Gt9SVfcbtWrLiGfcP9ODXmbqZ6AIOIbHKv9cvw1mnyYAtVvT/kck7B/W5jEr /aP/5RTO7XcqscWO44zBkrtLFupegtpQFB0jXYTJYTrwQoNKRqCUqfetZGzMkXjL x/h7kFTTIRcVP8RFcOeAMwC6EieaI8z8HN976Gu7xSV8g0VJqoNsBN8jbUuBh5AN oPyd9nl1KBcIQEC1HsbN8I5wIhTh1sJ2UDqFHAgtlnO59zWHORuFUUt6SXbC9UqJ okJTzFp9Dh2BqmFPXxBTxAf3j+eJP2XPpDI9Ask6SytEPhgw39fdlOOn2MWfSFoW TaBJ4ww/r98GzVxCP7Up98xFZuHGDICL3/M7Mk3mRac/lgbNRbtfcBa5NV4fyQhY 184t656Zm/9gdWgGAvYQtApr6/iI+wRMLkIwuw63wqH09yfbDcpTOo6DEQE3B5KR 4H1qSIiVGVVZlWQateR6N32ZmY4dWzpnL2b8CfsdBytzHHFb/c3dPnZB8fxx9mwF onyvjg9nkIiv7mdcN4Ox2WXrAExTeSftyPajN0WWawNJU3uPTBgNrqNHyWSkiaN4 dAvEepfGuFQGz2Fj03Pv7OqY8veyRezErVRLwiMJRNyy7pi6Wng= =cKsD -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - A big cleanup and optimization patch-set for the Tegra GART driver - Documentation updates and fixes for the IOMMU-API - Support for page request in Intel VT-d scalable mode - Intel VT-d dma_[un]map_resource() support - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel VT-d to align with the latest version of the ATS spec - Relaxed IRQ source checking in the Intel VT-d driver for some aliased devices, needed for future devices which send IRQ messages from more than on request-ID - IRQ remapping driver for Hyper-V - Patches to make generic IOVA and IO-Page-Table code usable outside of the IOMMU code - Various other small fixes and cleanups * tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Get domain ID before clear pasid entry iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm() iommu/vt-d: Set context field after value initialized iommu/vt-d: Disable ATS support on untrusted devices iommu/mediatek: Fix semicolon code style issue MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope iommu/hyper-v: Add Hyper-V stub IOMMU driver x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available PCI/ATS: Add inline to pci_prg_resp_pasid_required() iommu/vt-d: Check identity map for hot-added devices iommu: Fix IOMMU debugfs fallout iommu: Document iommu_ops.is_attach_deferred() iommu: Document iommu_ops.iotlb_sync_map() iommu/vt-d: Enable ATS only if the device uses page aligned address. PCI/ATS: Add pci_ats_page_aligned() interface iommu/vt-d: Fix PRI/PASID dependency issue. PCI/ATS: Add pci_prg_resp_pasid_required() interface. iommu/vt-d: Allow interrupts from the entire bus for aliased devices iommu/vt-d: Add helper to set an IRTE to verify only the bus number iommu: Fix flush_tlb_all typo ... |
||
|
Linus Torvalds
|
2901752c14 |
pci-v5.1-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlyCpL0UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vzoHw//ZyFbwekF0mV3RZwcV35LkScIOw0d O1DgjJo8UbuV51+/foQeUZ8IzjHlybQhoFdJupPuw+LyaDUkwqjAmdtY8J/FjWSm AJeVzu6gMF0Z9kwwGO4NyqX2EWluTD0xNLgf8g+fe3p1MtEuH6VCrqe+hk3wma0K CrSIKWY/sO408SpAaWiLTEZmVT+hXiP9hJw1qTrbqKLtyWa4oCjErdoyUDsA01+5 gPndKC/3pu6q6q9Dd94582HuQaE2dKHWQXx6Fzd/tdCyYffpbOUAUNP3aRXaTKrS MwKxOF3y7yUnz5RbxRgopwNVf5WyXhCnnPZRLaSxqnTSZCY6FCUi3l6RpVyWu2Ha iztBbkTP/x6WV3VWg810qgQKQ9wl8oALMkoOfR6lWCR7MTuJnMXJtbrz0jWpEC2O ZPwK9fAxFj2/3e13hx88O7Ek8kfajTPM8T15K79pvpljfqa0BD9SrhPyQ5ssmxj4 idz4yIFCATULKszPXA1QbfC1/xCDveQOEPSerL3eACXsLN17vfpOwOT9vWJm6bpr 6u5ggM2dEA07eI1ANnY6twn5g0kSYU9qISNQO98tA86IvaCnME0Z+k+SCwUNIM9U ep9k0NdAGDNsYOfdVEEY0fYGT9k+9f9w8AfZLNvh0N3s7mGQQ35jf0Z75jj/jsor cbMcPAN2jOCyFVs= =vf9L -----END PGP SIGNATURE----- Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ... |
||
|
Kuppuswamy Sathyanarayanan
|
8c938ddc6d |
PCI/ATS: Add pci_ats_page_aligned() interface
Return the Page Aligned Request bit in the ATS Capability Register. As per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit is set, it indicates the Untranslated Addresses generated by the device are always aligned to a 4096 byte boundary. An IOMMU that can only translate page-aligned addresses can only be used with devices that always produce aligned Untranslated Addresses. This interface will be used by drivers for such IOMMUs to determine whether devices can use the ATS service. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Ming Lei
|
c66d4bd110 |
genirq/affinity: Add new callback for (re)calculating interrupt sets
The interrupt affinity spreading mechanism supports to spread out affinities for one or more interrupt sets. A interrupt set contains one or more interrupts. Each set is mapped to a specific functionality of a device, e.g. general I/O queues and read I/O queus of multiqueue block devices. The number of interrupts per set is defined by the driver. It depends on the total number of available interrupts for the device, which is determined by the PCI capabilites and the availability of underlying CPU resources, and the number of queues which the device provides and the driver wants to instantiate. The driver passes initial configuration for the interrupt allocation via a pointer to struct irq_affinity. Right now the allocation mechanism is complex as it requires to have a loop in the driver to determine the maximum number of interrupts which are provided by the PCI capabilities and the underlying CPU resources. This loop would have to be replicated in every driver which wants to utilize this mechanism. That's unwanted code duplication and error prone. In order to move this into generic facilities it is required to have a mechanism, which allows the recalculation of the interrupt sets and their size, in the core code. As the core code does not have any knowledge about the underlying device, a driver specific callback is required in struct irq_affinity, which can be invoked by the core code. The callback gets the number of available interupts as an argument, so the driver can calculate the corresponding number and size of interrupt sets. At the moment the struct irq_affinity pointer which is handed in from the driver and passed through to several core functions is marked 'const', but for the callback to be able to modify the data in the struct it's required to remove the 'const' qualifier. Add the optional callback to struct irq_affinity, which allows drivers to recalculate the number and size of interrupt sets and remove the 'const' qualifier. For simple invocations, which do not supply a callback, a default callback is installed, which just sets nr_sets to 1 and transfers the number of spreadable vectors to the set_size array at index 0. This is for now guarded by a check for nr_sets != 0 to keep the NVME driver working until it is converted to the callback mechanism. To make sure that the driver configuration is correct under all circumstances the callback is invoked even when there are no interrupts for queues left, i.e. the pre/post requirements already exhaust the numner of available interrupts. At the PCI layer irq_create_affinity_masks() has to be invoked even for the case where the legacy interrupt is used. That ensures that the callback is invoked and the device driver can adjust to that situation. [ tglx: Fixed the simple case (no sets required). Moved the sanity check for nr_sets after the invocation of the callback so it catches broken drivers. Fixed the kernel doc comments for struct irq_affinity and de-'This patch'-ed the changelog ] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.512444498@linutronix.de |
||
|
Bjorn Helgaas
|
51c48b3101 |
PCI: Probe bridge window attributes once at enumeration-time
pci_bridge_check_ranges() determines whether a bridge supports the optional I/O and prefetchable memory windows and sets the flag bits in the bridge resources. This *could* be done once during enumeration except that the resource allocation code completely clears the flag bits, e.g., in the pci_assign_unassigned_bridge_resources() path. The problem with pci_bridge_check_ranges() in the resource allocation path is that we may allocate resources after devices have been claimed by drivers, and pci_bridge_check_ranges() *changes* the window registers to determine whether they're writable. This may break concurrent accesses to devices behind the bridge. Add a new pci_read_bridge_windows() to determine whether a bridge supports the optional windows, call it once during enumeration, remember the results, and change pci_bridge_check_ranges() so it doesn't touch the bridge windows but sets the flag bits based on those remembered results. Link: https://lore.kernel.org/linux-pci/1506151482-113560-1-git-send-email-wangzhou1@hisilicon.com Link: https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02082.html Reported-by: Yandong Xu <xuyandong2@huawei.com> Tested-by: Yandong Xu <xuyandong2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Ofer Hayut <ofer@lightbitslabs.com> Cc: Roy Shterman <roys@lightbitslabs.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> |
||
|
Linus Torvalds
|
926b02d3eb |
pci-v4.21-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlwtMCIUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vwQUQ/+P5/VDpo4abjudGO2c7FU1bJOwvfN cfV5dvDCw0kpx0Em5SmnpAD7Punllxxvb/04K75lqarGyx/Txqaw+lbIF+qSj6my GsQ16Iy8T48x5hr+Pf6vTh1eE+NaAVZfOPDOt7CyTNAgwfzHeVNyfNvz7pfKTIIJ Mk/jRE4kkeWo60jsY5p3sFo3OVOxBOsRdN+2sruaQuWFXrKHLyNDR+7Z9ZPxubFk cCO/TYPhNXmmKhCAR4V/rGiqz9OL2wyFixGhGhmD3tnC9nAb/wTMzjARsyBopBPi b/KkR2eLFEyXN0HJrwqxiURo4J3nveAYEuNXH5KjRBQZnoBCGSCIlqFhlrp9vdBk B4KIdT8h/M6LsVGeVSEIxIEXCp67YE31kxraFrk4Vsggdh2TFQ0llh1sajj8IFJB XekutedAOlTSOaM1/jvVPUJYg04X90bp3uXn3IU45XlQ8nBOG3immFVITRLkvd3w ywH+SEdeZAhWl3RGy8SHhqdeCJ7nNQbcRaRJ5CoWJBDNJTBGF1X+zJD2Swi6H9vA nWGNRlb3CPPIMPF127nADnOE7Cj2FlpAEIEu52HpcpIrhEdrGvLkGeQfgdWBjbyU aHwC04bLWnvsA9SEFVnuMIBaFQmJ1RuaWAHdtscyyO2uoeCtN8Aa+BX6jXFbVZQN 9eFzpiv0kUiXlAQ= =g1ia -----END PGP SIGNATURE----- Merge tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ... |
||
|
Bjorn Helgaas
|
6ee86cac1c |
Merge branch 'pci/virtualization'
- Skip VF scanning on powerpc, which does this in firmware (Sebastian
Ott)
* pci/virtualization:
s390/pci: skip VF scanning
PCI/IOV: Add flag so platforms can skip VF scanning
PCI/IOV: Factor out sriov_add_vfs()
|
||
|
Sebastian Ott
|
aff68a5a62 |
PCI/IOV: Add flag so platforms can skip VF scanning
Provide a flag to skip scanning for new VFs after SR-IOV enablement. This can be set by implementations for which the VFs are already reported by other means. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
||
|
Linus Torvalds
|
457fa3469a |
Char/Misc driver patches for 4.21-rc1
Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems to
be the "collection of various driver subsystems not big enough to have
their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems. This was discussed at the
Plumbers conference a few months ago and knocked into mergable shape
very fast by Christian Brauner. Who also has signed up to be
another binder maintainer, showing a distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCZCUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymF9QCgx/Z8Fj1qzGVGrIE4flXOi7pxOrgAoMqJEWtU
ywwL8M9suKDz7cZT9fWQ
=xxr6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems
to be the "collection of various driver subsystems not big enough to
have their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems.
This was discussed at the Plumbers conference a few months ago and
knocked into mergable shape very fast by Christian Brauner. Who
also has signed up to be another binder maintainer, showing a
distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
MAINTAINERS: add another Android binder maintainer
intel_th: msu: Fix an off-by-one in attribute store
stm class: Add a reference to the SyS-T document
stm class: Fix a module refcount leak in policy creation error path
char: lp: use new parport device model
char: lp: properly count the lp devices
char: lp: use first unused lp number while registering
char: lp: detach the device when parallel port is removed
char: lp: introduce list to save port number
bus: qcom: remove duplicated include from qcom-ebi2.c
VMCI: Use memdup_user() rather than duplicating its implementation
char/rtc: Use of_node_name_eq for node name comparisons
misc: mic: fix a DMA pool free failure
ptp: fix an IS_ERR() vs NULL check
genwqe: Fix size check
binder: implement binderfs
binder: fix use-after-free due to ksys_close() during fdget()
bus: fsl-mc: remove duplicated include files
bus: fsl-mc: explicitly define the fsl_mc_command endianness
misc: ti-st: make array read_ver_cmd static, shrinks object size
...
|
||
|
Sinan Kaya
|
5d32a66541 |
PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
We are compiling PCI code today for systems with ACPI and no PCI device present. Remove the useless code and reduce the tight dependency. Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Benjamin Young
|
7cb3026411 |
PCI: Remove unnecessary space before function pointer arguments
Make spacing more consistent in the code for function pointer declarations based on checkpatch.pl. Signed-off-by: Benjamin Young <youngcdev@gmail.com> [bhelgaas: make similar changes in include/linux/pci.h] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Mika Westerberg
|
617654aae5 |
PCI / ACPI: Identify untrusted PCI devices
A malicious PCI device may use DMA to attack the system. An external
Thunderbolt port is a convenient point to attach such a device. The OS
may use IOMMU to defend against DMA attacks.
Some BIOSes mark these externally facing root ports with this
ACPI _DSD [1]:
Name (_DSD, Package () {
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package () {
Package () {"ExternalFacingPort", 1},
Package () {"UID", 0 }
}
})
If we find such a root port, mark it and all its children as untrusted.
The rest of the OS may use this information to enable DMA protection
against malicious devices. For instance the device may be put behind an
IOMMU to keep it from accessing memory outside of what the driver has
allocated for it.
While at it, add a comment on top of prp_guids array explaining the
possible caveat resulting when these GUIDs are treated equivalent.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
||
|
Linus Torvalds
|
bd6bf7c104 |
pci-v4.20-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlvPV7IUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vyaUg//WnCaRIu2oKOp8c/bplZJDW5eT10d oYAN9qeyptU9RYrg4KBNbZL9UKGFTk3AoN5AUjrk8njxc/dY2ra/79esOvZyyYQy qLXBvrXKg3yZnlNlnyBneGSnUVwv/kl2hZS+kmYby2YOa8AH/mhU0FIFvsnfRK2I XvwABFm2ZYvXCqh3e5HXaHhOsR88NQ9In0AXVC7zHGqv1r/bMVn2YzPZHL/zzMrF mS79tdBTH+shSvchH9zvfgIs+UEKvvjEJsG2liwMkcQaV41i5dZjSKTdJ3EaD/Y2 BreLxXRnRYGUkBqfcon16Yx+P6VCefDRLa+RhwYO3dxFF2N4ZpblbkIdBATwKLjL npiGc6R8yFjTmZU0/7olMyMCm7igIBmDvWPcsKEE8R4PezwoQv6YKHBMwEaflIbl Rv4IUqjJzmQPaA0KkRoAVgAKHxldaNqno/6G1FR2gwz+fr68p5WSYFlQ3axhvTjc bBMJpB/fbp9WmpGJieTt6iMOI6V1pnCVjibM5ZON59WCFfytHGGpbYW05gtZEod4 d/3yRuU53JRSj3jQAQuF1B6qYhyxvv5YEtAQqIFeHaPZ67nL6agw09hE+TlXjWbE rTQRShflQ+ydnzIfKicFgy6/53D5hq7iH2l7HwJVXbXRQ104T5DB/XHUUTr+UWQn /Nkhov32/n6GjxQ= =58I4 -----END PGP SIGNATURE----- Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ... |
||
|
Mark Brown
|
4b51c747e4
|
Merge branch 'spi-4.20' into spi-next | ||
|
Bjorn Helgaas
|
1734715493 |
Merge branch 'pci/peer-to-peer'
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
* pci/peer-to-peer:
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
PCI/P2PDMA: Add sysfs group to display p2pmem stats
PCI/P2PDMA: Support peer-to-peer memory
|
||
|
Bjorn Helgaas
|
ee8360fdaf |
Merge branch 'pci/misc'
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless
dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
* pci/misc:
PCI: pcie: Remove redundant 'default n' from Kconfig
NTB: switchtec_ntb: Update switchtec documentation with prerequisites for NTB
PCI: Fix Switchtec DMA aliasing quirk dmesg noise
PCI: Add macro for Switchtec quirk declarations
PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk
PCI: Remove pci_set_dma_max_seg_size()
PCI: Remove pci_set_dma_seg_boundary()
PCI: Remove pci_unmap_addr() wrappers for DMA API
PCI / ACPI: Mark expected switch fall-through
PCI: Remove set but unused variable
PCI: Fix pci.c kernel-doc parameter warning
PCI: Allocate dma_alias_mask with bitmap_zalloc()
PCI: Remove unused NFP32xx IDs
|
||
|
Bjorn Helgaas
|
20634dc361 |
Merge branch 'pci/hotplug'
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state (Keith
Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and re-enumerate
devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets (Keith
Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable from
cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments (Keith
Busch)
* pci/hotplug:
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI/AER: Use threaded IRQ for bottom half
PCI/AER: Use kfifo_in_spinlocked() to insert locked elements
PCI/AER: Use kfifo for tracking events instead of reimplementing it
PCI/AER: Remove error source from AER struct aer_rpc
PCI/AER: Remove unused aer_error_resume()
PCI: Uninline PCI bus accessors for better ftracing
PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls
PCI: pnv_php: Use kmemdup()
PCI: cpqphp: Remove set but not used variable 'physical_slot'
PCI/ERR: Remove duplicated include from err.c
PCI: Equalize hotplug memory and io for occupied and empty slots
PCI / ACPI: Whitelist D3 for more PCIe hotplug ports
ACPI / property: Allow multiple property compatible _DSD entries
PCI/PME: Implement runtime PM callbacks
PCI: pciehp: Implement runtime PM callbacks
PCI/portdrv: Add runtime PM hooks for port service drivers
PCI/portdrv: Resume upon exit from system suspend if left runtime suspended
PCI: pciehp: Do not handle events if interrupts are masked
PCI: pciehp: Disable hotplug interrupt during suspend
PCI / ACPI: Enable wake automatically for power managed bridges
PCI: Do not skip power-managed bridges in pci_enable_wake()
PCI: Make link active reporting detection generic
PCI: Unify device inaccessible
PCI/ERR: Always report current recovery status for udev
PCI/ERR: Simplify broadcast callouts
PCI/ERR: Run error recovery callbacks for all affected devices
PCI/ERR: Handle fatal error recovery
PCI/ERR: Use slot reset if available
PCI/AER: Don't read upstream ports below fatal errors
PCI/AER: Take reference on error devices
PCI/DPC: Save and restore config state
PCI: portdrv: Restore PCI config state on slot reset
PCI: portdrv: Initialize service drivers directly
PCI: hotplug: Document TODOs
PCI: hotplug: Embed hotplug_slot
PCI: hotplug: Drop hotplug_slot_info
PCI: hotplug: Constify hotplug_slot_ops
PCI: pciehp: Reshuffle controller struct for clarity
PCI: pciehp: Rename controller struct members for clarity
PCI: pciehp: Unify controller and slot structs
PCI: pciehp: Tolerate Presence Detect hardwired to zero
PCI: pciehp: Drop hotplug_slot_ops wrappers
PCI: pciehp: Drop unnecessary includes
PCI: pciehp: Differentiate between surprise and safe removal
PCI: Simplify disconnected marking
|
||
|
Lubomir Rintel
|
9c21200905
|
PCI: Provide pci_match_id() with CONFIG_PCI=n
This spares drivers from #ifdef-ing on CONFIG_PCI if the driver can be optionally built on machines without PCI bus. Consistent with acpi_driver_match_device() and similar. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Christoph Hellwig
|
18b01b16e8 |
PCI: Remove pci_unmap_addr() wrappers for DMA API
Only some of these were still used by the cxgb4 driver, and that despite the fact that the driver otherwise uses the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Logan Gunthorpe
|
52916982af |
PCI/P2PDMA: Support peer-to-peer memory
Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers. Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers: struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem(); The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions. Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices. The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware. This commit includes significant rework and feedback from Christoph Hellwig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Keith Busch
|
f0157160b3 |
PCI: Make link active reporting detection generic
The spec has timing requirements when waiting for a link to become active after a conventional reset. Implement those hard delays when waiting for an active link so pciehp and dpc drivers don't need to duplicate this. For devices that don't support data link layer active reporting, wait the fixed time recommended by the PCIe spec. Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> |
||
|
Felipe Balbi
|
d6112f8def |
PCI: Add support for Immediate Readiness
PCIe r4.0, sec 7.5.1.1.4 defines a new bit in the Status Register: Immediate Readiness – This optional bit, when Set, indicates the Function is guaranteed to be ready to successfully complete valid configuration accesses at any time following any reset that the host is capable of issuing Configuration Requests to this Function. When this bit is Set, for accesses to this Function, software is exempt from all requirements to delay configuration accesses following any type of reset, including but not limited to the timing requirements defined in Section 6.6. This means that all delays after a Conventional or Function Reset can be skipped. This patch reads such bit and caches its value in a flag inside struct pci_dev to be checked later if we should delay or can skip delays after a reset. While at that, also move the explicit msleep(100) call from pcie_flr() and pci_af_flr() to pci_dev_wait(). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [bhelgaas: rename PCI_STATUS_IMMEDIATE to PCI_STATUS_IMM_READY] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Dennis Dalessandro
|
bfc456060d |
IB/hfi1,PCI: Allow bus reset while probing
Calling into the new API to reset the secondary bus results in a deadlock. This occurs because the device/bus is already locked at probe time. Reverting back to the old behavior while the API is improved. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200985 Fixes: |
||
|
Ard Biesheuvel
|
c9d8b55fa0 |
PCI: Add support for relative addressing in quirk tables
Allow the PCI quirk tables to be emitted in a way that avoids absolute references to the hook functions. This reduces the size of the entries, and, more importantly, makes them invariant under runtime relocation (e.g., for KASLR) Link: http://lkml.kernel.org/r/20180704083651.24360-6-ard.biesheuvel@linaro.org Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
4e31843f68 |
pci-v4.19-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlt1f9AUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vxbdhAArnhRvkwOk4m4/LCuKF6HpmlxbBNC TjnBCenNf+lFXzWskfDFGFl/Wif4UzGbRTSCNQrwMzj3Ww3f/6R2QIq9rEJvyNC4 VdxQnaBEZSUgN87q5UGqgdjMTo3zFvlFH6fpb5XDiQ5IX/QZeXeYqoB64w+HvKPU M+IsoOvnA5gb7pMcpchrGUnSfS1e6AqQbbTt6tZflore6YCEA4cH5OnpGx8qiZIp ut+CMBvQjQB01fHeBc/wGrVte4NwXdONrXqpUb4sHF7HqRNfEh0QVyPhvebBi+k1 kquqoBQfPFTqgcab31VOcQhg70dEx+1qGm5/YBAwmhCpHR/g2gioFXoROsr+iUOe BtF6LZr+Y8cySuhJnkCrJBqWvvBaKbJLg0KMbI+7p4o9MZpod2u7LS5LFrlRDyKW 3nz3o+b1+v3tCCKVKIhKo0ljolgkweQtR1f6KIHvq93wBODHVQnAOt9NlPfHVyks ryGBnOhMjoU5hvfexgIWFk9Ph9MEVQSffkI+TeFPO/tyGBfGfQyGtESiXuEaMQaH FGdZHX2RLkY3pWHOtWeMzRHzOnr2XjpDFcAqL3HBGPdJ30K3Umv3WOgoFe2SaocG 0gaddPjKSwwM4Sa/VP+O5cjGuzi7QnczSDdpYjxIGZzBav32hqx4/rsnLw7bHH8y XkEme7cYJc8MGsA= =2Dmn -----END PGP SIGNATURE----- Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ... |
||
|
Linus Torvalds
|
54dbe75bbf |
drm pull for 4.19-rc1
-----BEGIN PGP SIGNATURE-----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=g9rD
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.19.
Rob has some new hardware support for new qualcomm hw that I'll send
along separately. This has the display part of it, the remaining pull
is for the acceleration engine.
This also contains a wound-wait/wait-die mutex rework, Peter has acked
it for merging via my tree.
Otherwise mostly the usual level of activity. Summary:
core:
- Wound-wait/wait-die mutex rework
- Add writeback connector type
- Add "content type" property for HDMI
- Move GEM bo to drm_framebuffer
- Initial gpu scheduler documentation
- GPU scheduler fixes for dying processes
- Console deferred fbcon takeover support
- Displayport support for CEC tunneling over AUX
panel:
- otm8009a panel driver fixes
- Innolux TV123WAM and G070Y2-L01 panel driver
- Ilitek ILI9881c panel driver
- Rocktech RK070ER9427 LCD
- EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
- DLC DLC0700YZG-1
- BOE HV070WSA-100
- newhaven, nhd-4.3-480272ef-atxl LCD
- DataImage SCF0700C48GGU18
- Sharp LQ035Q7DB03
- p079zca: Refactor to support multiple panels
tinydrm:
- ILI9341 display panel
New driver:
- vkms - virtual kms driver to testing.
i915:
- Icelake:
Display enablement
DSI support
IRQ support
Powerwell support
- GPU reset fixes and improvements
- Full ppgtt support refactoring
- PSR fixes and improvements
- Execlist improvments
- GuC related fixes
amdgpu:
- Initial amdgpu documentation
- JPEG engine support on VCN
- CIK uses powerplay by default
- Move to using core PCIE functionality for gens/lanes
- DC/Powerplay interface rework
- Stutter mode support for RV
- Vega12 Powerplay updates
- GFXOFF fixes
- GPUVM fault debugging
- Vega12 GFXOFF
- DC improvements
- DC i2c/aux changes
- UVD 7.2 fixes
- Powerplay fixes for Polaris12, CZ/ST
- command submission bo_list fixes
amdkfd:
- Raven support
- Power management fixes
udl:
- Cleanups and fixes
nouveau:
- misc fixes and cleanups.
msm:
- DPU1 support display controller in sdm845
- GPU coredump support.
vmwgfx:
- Atomic modesetting validation fixes
- Support for multisample surfaces
armada:
- Atomic modesetting support completed.
exynos:
- IPPv2 fixes
- Move g2d to component framework
- Suspend/resume support cleanups
- Driver cleanups
imx:
- CSI configuration improvements
- Driver cleanups
- Use atomic suspend/resume helpers
- ipu-v3 V4L2 XRGB32/XBGR32 support
pl111:
- Add Nomadik LCDC variant
v3d:
- GPU scheduler jobs management
sun4i:
- R40 display engine support
- TCON TOP driver
mediatek:
- MT2712 SoC support
rockchip:
- vop fixes
omapdrm:
- Workaround for DRA7 errata i932
- Fix mm_list locking
mali-dp:
- Writeback implementation
PM improvements
- Internal error reporting debugfs
tilcdc:
- Single fix for deferred probing
hdlcd:
- Teardown fixes
tda998x:
- Converted to a bridge driver.
etnaviv:
- Misc fixes"
* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
drm/scheduler: fix param documentation
drm/i2c: tda998x: correct PLL divider calculation
drm/i2c: tda998x: get rid of private fill_modes function
drm/i2c: tda998x: move mode_valid() to bridge
drm/i2c: tda998x: register bridge outside of component helper
drm/i2c: tda998x: cleanup from previous changes
drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
drm/i2c: tda998x: convert to bridge driver
drm/scheduler: fix timeout worker setup for out of order job completions
drm/amd/display: display connected to dp-1 does not light up
drm/amd/display: update clk for various HDMI color depths
drm/amd/display: program display clock on cache match
drm/amd/display: Add NULL check for enabling dp ss
drm/amd/display: add vbios table check for enabling dp ss
drm/amd/display: Don't share clk source between DP and HDMI
drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
drm/amd/display: Use calculated disp_clk_khz value for dce110
drm/amd/display: Implement custom degamma lut on dcn
drm/amd/display: Destroy aux_engines only once
...
|
||
|
Bjorn Helgaas
|
3a48dc6fc2 |
Merge branch 'pci/virtualization'
- To avoid bus errors, enable PASID only if entire path supports End-End
TLP prefixes (Sinan Kaya)
- Unify slot and bus reset functions and remove hotplug knowledge from
callers (Sinan Kaya)
- Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
fix guest reboot issues (Alex Williamson)
- Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller
(Bjorn Helgaas)
* pci/virtualization:
PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
PCI: Delay after FLR of Intel DC P3700 NVMe
PCI: Disable Samsung SM961/PM961 NVMe before FLR
PCI: Export pcie_has_flr()
PCI: Rename pci_try_reset_bus() to pci_reset_bus()
PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions
PCI: Unify try slot and bus reset API
PCI: Hide pci_reset_bridge_secondary_bus() from drivers
IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset
PCI: Handle error return from pci_reset_bridge_secondary_bus()
PCI/IOV: Tidy pci_sriov_set_totalvfs()
PCI: Enable PASID only if entire path supports End-End TLP prefixes
# Conflicts:
# drivers/pci/hotplug/pciehp_hpc.c
|
||
|
Bjorn Helgaas
|
5fc054a544 |
Merge branch 'pci/resource'
- Clean up devm_of_pci_get_host_bridge_resources() resource allocation
(Jan Kiszka)
- Fixup resizable BARs after suspend/resume (Christian König)
- Make "pci=earlydump" generic (Sinan Kaya)
- Fix ROM BAR access routines to stay in bounds and check for signature
correctly (Rex Zhu)
* pci/resource:
PCI: Make pci_get_rom_size() static
PCI: Add check code for last image indicator not set
PCI: Avoid accessing memory outside the ROM BAR
PCI: Make early dump functionality generic
PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling
PCI: Restore resized BAR state on resume
PCI: Clean up resource allocation in devm_of_pci_get_host_bridge_resources()
# Conflicts:
# Documentation/admin-guide/kernel-parameters.txt
|
||
|
Bjorn Helgaas
|
c689209be2 |
Merge branch 'pci/peer-to-peer'
- Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
peer-to-peer DMA support (we don't have the peer-to-peer support yet;
this is just one piece) (Logan Gunthorpe)
* pci/peer-to-peer:
PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
PCI: Add device-specific ACS Redirect disable infrastructure
PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
PCI: Allow specifying devices using a base bus and path of devfns
PCI: Make specifying PCI devices in kernel parameters reusable
PCI: Hide ACS quirk declarations inside PCI core
|
||
|
Bjorn Helgaas
|
a40f72db8a |
Merge branch 'pci/misc'
- Mark fall-through switch cases before enabling -Wimplicit-fallthrough
(Gustavo A. R. Silva)
- Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig)
- Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied
(Heiner Kallweit)
- Unify PCI and DMA direction #defines (Shunyong Yang)
- Add PCI_DEVICE_DATA() macro (Andy Shevchenko)
- Check for VPD completion before checking for timeout (Bert Kenward)
- Limit Netronome NFP5000 config space size to work around erratum (Jakub
Kicinski)
* pci/misc:
PCI: Limit config space size for Netronome NFP5000
PCI/VPD: Check for VPD access completion before checking for timeout
PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
PCI: Unify PCI and normal DMA direction definitions
PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler
PCI: Call dma_debug_add_bus() for pci_bus_type from PCI core
PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough
# Conflicts:
# drivers/pci/hotplug/pciehp_ctrl.c
|
||
|
Bjorn Helgaas
|
c0638a4553 |
Merge branch 'pci/hotplug'
- Simplify SHPC existence/permission checks (Bjorn Helgaas)
- Remove hotplug sample skeleton driver (Lukas Wunner)
- Convert pciehp to threaded IRQ handling (Lukas Wunner)
- Improve pciehp tolerance of missed events and initially unstable links
(Lukas Wunner)
- Clear spurious pciehp events on resume (Lukas Wunner)
- Add pciehp runtime PM support, including for Thunderbolt controllers
(Lukas Wunner)
- Support interrupts from pciehp bridges in D3hot (Lukas Wunner)
* pci/hotplug:
PCI: pciehp: Deduplicate presence check on probe & resume
PCI: pciehp: Avoid implicit fallthroughs in switch statements
PCI: Whitelist Thunderbolt ports for runtime D3
PCI: Whitelist native hotplug ports for runtime D3
PCI: sysfs: Resume to D0 on function reset
PCI: pciehp: Resume parent to D0 on config space access
PCI: pciehp: Resume to D0 on enable/disable
PCI: pciehp: Support interrupts sent from D3hot
PCI: pciehp: Obey compulsory command delay after resume
PCI: pciehp: Clear spurious events earlier on resume
PCI: portdrv: Deduplicate PM callback iterator
PCI: pciehp: Avoid slot access during reset
PCI: pciehp: Always enable occupied slot on probe
PCI: pciehp: Become resilient to missed events
PCI: pciehp: Tolerate initially unstable link
PCI: pciehp: Declare pciehp_enable/disable_slot() static
PCI: pciehp: Drop enable/disable lock
PCI: pciehp: Enable/disable exclusively from IRQ thread
PCI: pciehp: Track enable/disable status
PCI: pciehp: Publish to user space last on probe
PCI: hotplug: Demidlayer registration with the core
PCI: pciehp: Drop slot workqueue
PCI: pciehp: Handle events synchronously
PCI: pciehp: Stop blinking on slot enable failure
PCI: pciehp: Convert to threaded polling
PCI: pciehp: Convert to threaded IRQ
PCI: pciehp: Document struct slot and struct controller
PCI: pciehp: Declare pciehp_unconfigure_device() void
PCI: pciehp: Drop unnecessary NULL pointer check
PCI: pciehp: Fix unprotected list iteration in IRQ handler
PCI: pciehp: Fix use-after-free on unplug
PCI: hotplug: Don't leak pci_slot on registration failure
PCI: hotplug: Delete skeleton driver
PCI: shpchp: Separate existence of SHPC and permission to use it
|
||
|
Bjorn Helgaas
|
3c3ab37f4c |
Merge branch 'pci/aer'
- Decode AER errors with names similar to "lspci" (Tyler Baicar)
- Expose AER statistics in sysfs (Rajat Jain)
- Clear AER status bits selectively based on the type of recovery (Oza
Pawandeep)
- Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
Gagniuc)
- Don't clear AER status bits if we're using the "Firmware-First"
strategy where firmware owns the registers (Alexandru Gagniuc)
* pci/aer:
PCI/AER: Don't clear AER bits if error handling is Firmware-First
PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition
PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset
PCI/AER: Clear device status bits during ERR_COR handling
PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL
PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path
PCI/AER: Factor out ERR_NONFATAL status bit clearing
PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery
PCI/AER: Clear only ERR_FATAL status bits during fatal recovery
PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST
PCI/AER: Add sysfs attributes for rootport cumulative stats
PCI/AER: Add sysfs attributes to provide AER stats and breakdown
PCI/AER: Define aer_stats structure for AER capable devices
PCI/AER: Move internal declarations to drivers/pci/pci.h
PCI/AER: Adopt lspci names for AER error decoding
PCI/AER: Expose internal API for obtaining AER information
# Conflicts:
# drivers/pci/pci.h
|
||
|
Andy Shevchenko
|
b72ae8cac0 |
PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
There are a lot of examples in the kernel where PCI_VDEVICE() is used and
still looks not so convenient due to additional driver_data field attached.
Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in
shortest possible form. For example,
before:
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
(kernel_ulong_t) &dwc3_pci_mrfld_properties, },
after:
{ PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) },
Drivers can be converted later on in independent way.
While here, remove the unused macro with the same name from Ralink wireless
driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org> # for rt2x00
|
||
|
Bjorn Helgaas
|
bd2e9567db |
PCI: Hide ACS quirk declarations inside PCI core
Move declarations for these functions: pci_dev_specific_acs_enabled() pci_dev_specific_enable_acs() from include/linux/pci.h to drivers/pci/pci.h because nothing outside the PCI core needs to use them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Alex Williamson
|
2d2917f774 |
PCI: Export pcie_has_flr()
pcie_flr() suggests pcie_has_flr() to ensure that PCIe FLR support is present prior to calling. pcie_flr() is exported while pcie_has_flr() is not. Resolve this. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Hari Vyas
|
44bda4b7d2 |
PCI: Fix is_added/is_busmaster race condition
When a PCI device is detected, pdev->is_added is set to 1 and proc and sysfs entries are created. When the device is removed, pdev->is_added is checked for one and then device is detached with clearing of proc and sys entries and at end, pdev->is_added is set to 0. is_added and is_busmaster are bit fields in pci_dev structure sharing same memory location. A strange issue was observed with multiple removal and rescan of a PCIe NVMe device using sysfs commands where is_added flag was observed as zero instead of one while removing device and proc,sys entries are not cleared. This causes issue in later device addition with warning message "proc_dir_entry" already registered. Debugging revealed a race condition between the PCI core setting the is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue setting the is_busmaster bit in pci_set_master(). As these fields are not handled atomically, that clears the is_added bit. Move the is_added bit to a separate private flag variable and use atomic functions to set and retrieve the device addition state. This avoids the race because is_added no longer shares a memory location with is_busmaster. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283 Signed-off-by: Hari Vyas <hari.vyas@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> |
||
|
Dave Airlie
|
3fce461827 |
BackMerge v4.18-rc7 into drm-next
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
Sinan Kaya
|
c6a44ba950 |
PCI: Rename pci_try_reset_bus() to pci_reset_bus()
Now that the old implementation of pci_reset_bus() is gone, replace pci_try_reset_bus() with pci_reset_bus(). Compared to the old implementation, new code will fail immmediately with -EAGAIN if object lock cannot be obtained. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |