mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
c05344947b
2571 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thomas Gleixner
|
c05344947b |
x86/mm/dump_pagetables: Check PAGE_PRESENT for real
The check for a present page in printk_prot():
if (!pgprot_val(prot)) {
/* Not present */
is bogus. If a PTE is set to PAGE_NONE then the pgprot_val is not zero and
the entry is decoded in bogus ways, e.g. as RX GLB. That is confusing when
analyzing mapping correctness. Check for the present bit to make an
informed decision.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Andy Lutomirski
|
21506525fb |
x86/kasan/64: Teach KASAN about the cpu_entry_area
The cpu_entry_area will contain stacks. Make sure that KASAN has appropriate shadow mappings for them. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: kasan-dev@googlegroups.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.642806442@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andrey Ryabinin
|
2aeb07365b |
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
[ Note, this is a Git cherry-pick of the following commit:
|
||
|
Ingo Molnar
|
e5d77a73f3 |
Merge commit 'upstream-x86-virt' into WIP.x86/mm
Merge a minimal set of virt cleanups, for a base for the MM isolation patches. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
650400b2cc |
Merge branch 'upstream-x86-selftests' into WIP.x86/pti.base
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
0fd2e9c53d |
Merge commit 'upstream-x86-entry' into WIP.x86/mm
Pull in a minimal set of v4.15 entry code changes, for a base for the MM isolation patches. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Juergen Gross
|
f72e38e8ec |
x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init'
Instead of x86_hyper being either NULL on bare metal or a pointer to a struct hypervisor_x86 in case of the kernel running as a guest merge the struct into x86_platform and x86_init. This will remove the need for wrappers making it hard to find out what is being called. With dummy functions added for all callbacks testing for a NULL function pointer can be removed, too. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: devel@linuxdriverproject.org Cc: haiyangz@microsoft.com Cc: kvm@vger.kernel.org Cc: kys@microsoft.com Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: rusty@rustcorp.com.au Cc: sthemmin@microsoft.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20171109132739.23465-2-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Jiri Kosina
|
87df26175e |
x86/mm: Unbreak modules that rely on external PAGE_KERNEL availability
Commit
|
||
|
Ingo Molnar
|
b3d9a13681 |
Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflicts
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
75ec4eb3dc |
Merge branch 'x86/mm' into x86/asm, to pick up pending changes
Concentrate x86 MM and asm related changes into a single super-topic, in preparation for larger changes. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
9b3499d752 |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- A PCID related revert that fixes power management and performance
regressions.
- The module loader robustization and sanity check commit is rather
fresh, but it looked like a good idea to apply because of the
hidden data corruption problem such invalid modules could cause"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/module: Detect and skip invalid relocations
Revert "x86/mm: Stop calling leave_mm() in idle code"
|
||
|
Andy Lutomirski
|
675357362a |
Revert "x86/mm: Stop calling leave_mm() in idle code"
This reverts commit |
||
|
Linus Torvalds
|
ead751507d |
License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
||
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ricardo Neri
|
1067f03099 |
x86/mm: Relocate page fault error codes to traps.h
Up to this point, only fault.c used the definitions of the page fault error codes. Thus, it made sense to keep them within such file. Other portions of code might be interested in those definitions too. For instance, the User- Mode Instruction Prevention emulation code will use such definitions to emulate a page fault when it is unable to successfully copy the results of the emulated instructions to user space. While relocating the error code enumeration, the prefix X86_ is used to make it consistent with the rest of the definitions in traps.h. Of course, code using the enumeration had to be updated as well. No functional changes were performed. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/1509135945-13762-2-git-send-email-ricardo.neri-calderon@linux.intel.com |
||
|
Vlastimil Babka
|
cb0631fd3c |
x86/mm: fix use-after-free of vma during userfaultfd fault
Syzkaller with KASAN has reported a use-after-free of vma->vm_flags in
__do_page_fault() with the following reproducer:
mmap(&(0x7f0000000000/0xfff000)=nil, 0xfff000, 0x3, 0x32, 0xffffffffffffffff, 0x0)
mmap(&(0x7f0000011000/0x3000)=nil, 0x3000, 0x1, 0x32, 0xffffffffffffffff, 0x0)
r0 = userfaultfd(0x0)
ioctl$UFFDIO_API(r0, 0xc018aa3f, &(0x7f0000002000-0x18)={0xaa, 0x0, 0x0})
ioctl$UFFDIO_REGISTER(r0, 0xc020aa00, &(0x7f0000019000)={{&(0x7f0000012000/0x2000)=nil, 0x2000}, 0x1, 0x0})
r1 = gettid()
syz_open_dev$evdev(&(0x7f0000013000-0x12)="2f6465762f696e7075742f6576656e742300", 0x0, 0x0)
tkill(r1, 0x7)
The vma should be pinned by mmap_sem, but handle_userfault() might (in a
return to userspace scenario) release it and then acquire again, so when
we return to __do_page_fault() (with other result than VM_FAULT_RETRY),
the vma might be gone.
Specifically, per Andrea the scenario is
"A return to userland to repeat the page fault later with a
VM_FAULT_NOPAGE retval (potentially after handling any pending signal
during the return to userland). The return to userland is identified
whenever FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in
vmf->flags"
However, since commit
|
||
|
Baoquan He
|
15670bfe19 |
x86/mm/64: Rename the register_page_bootmem_memmap() 'size' parameter to 'nr_pages'
register_page_bootmem_memmap()'s 3rd 'size' parameter is named in a somewhat misleading fashion - rename it to 'nr_pages' which makes the units of it much clearer. Meanwhile rename the existing local variable 'nr_pages' to 'nr_pmd_pages', a more expressive name, to avoid conflict with new function parameter 'nr_pages'. (Also clean up the unnecessary parentheses in which get_order() is called.) Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/1509154238-23250-1-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
e17bae3266 |
Linux 4.14-rc7
-----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3 KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3 /utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v /sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK 1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+ UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM= =Mhx+ -----END PGP SIGNATURE----- Merge tag 'v4.14-rc7' into x86/mm, to pick up fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
90edaac627 |
Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"
This reverts commit
|
||
|
Andrey Ryabinin
|
12a8cc7fcf |
x86/kasan: Use the same shadow offset for 4- and 5-level paging
We are going to support boot-time switching between 4- and 5-level paging. For KASAN it means we cannot have different KASAN_SHADOW_OFFSET for different paging modes: the constant is passed to gcc to generate code and cannot be changed at runtime. This patch changes KASAN code to use 0xdffffc0000000000 as shadow offset for both 4- and 5-level paging. For 5-level paging it means that shadow memory region is not aligned to PGD boundary anymore and we have to handle unaligned parts of the region properly. In addition, we have to exclude paravirt code from KASAN instrumentation as we now use set_pgd() before KASAN is fully ready. [kirill.shutemov@linux.intel.com: clenaup, changelog message] Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170929140821.37654-4-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Craig Bergstrom
|
ce56a86e2a |
x86/mm: Limit mmap() of /dev/mem to valid physical addresses
Currently, it is possible to mmap() any offset from /dev/mem. If a program mmaps() /dev/mem offsets outside of the addressable limits of a system, the page table can be corrupted by setting reserved bits. For example if you mmap() offset 0x0001000000000000 of /dev/mem on an x86_64 system with a 48-bit bus, the page fault handler will be called with error_code set to RSVD. The kernel then crashes with a page table corruption error. This change prevents this page table corruption on x86 by refusing to mmap offsets higher than the highest valid address in the system. Signed-off-by: Craig Bergstrom <craigb@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: dsafonov@virtuozzo.com Cc: kirill.shutemov@linux.intel.com Cc: mhocko@suse.com Cc: oleg@redhat.com Link: http://lkml.kernel.org/r/20171019192856.39672-1-craigb@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andy Lutomirski
|
7ac7f2c315 |
x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mm
Borislav thinks that we don't need this knob in a released kernel.
Get rid of it.
Requested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
||
|
Andy Lutomirski
|
4e57b94664 |
x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode"
Due to timezones, commit: |
||
|
Andy Lutomirski
|
e8b9b0cc82 |
x86/mm/64: Remove the last VM_BUG_ON() from the TLB code
Let's avoid hard-to-diagnose crashes in the future. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f423bbc97864089fbdeb813f1ea126c6eaed844a.1508000261.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andy Lutomirski
|
b956575bed |
x86/mm: Flush more aggressively in lazy TLB mode
Since commit: |
||
|
Tom Lendacky
|
67bb8e999e |
x86/mm: Disable various instrumentations of mm/mem_encrypt.c and mm/tlb.c
Some routines in mem_encrypt.c are called very early in the boot process, e.g. sme_enable(). When CONFIG_KCOV=y is defined the resulting code added to sme_enable() (and others) for KCOV instrumentation results in a kernel crash. Disable the KCOV instrumentation for mem_encrypt.c by adding KCOV_INSTRUMENT_mem_encrypt.o := n to arch/x86/mm/Makefile. In order to avoid other possible early boot issues, model mem_encrypt.c after head64.c in regards to tools. In addition to disabling KCOV as stated above and a previous patch that disables branch profiling, also remove the "-pg" CFLAG if CONFIG_FUNCTION_TRACER is enabled and set KASAN_SANITIZE to "n", each of which are done on a file basis. Reported-by: kernel test robot <lkp@01.org> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171010194504.18887.38053.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
368f89984b |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This contains the following fixes and improvements:
- Avoid dereferencing an unprotected VMA pointer in the fault signal
generation code
- Fix inline asm call constraints for GCC 4.4
- Use existing register variable to retrieve the stack pointer
instead of forcing the compiler to create another indirect access
which results in excessive extra 'mov %rsp, %<dst>' instructions
- Disable branch profiling for the memory encryption code to prevent
an early boot crash
- Fix a sparse warning caused by casting the __user annotation in
__get_user_asm_u64() away
- Fix an off by one error in the loop termination of the error patch
in the x86 sysfs init code
- Add missing CPU IDs to various Intel specific drivers to enable the
functionality on recent hardware
- More (init) constification in the numachip code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Use register variable to get stack pointer value
x86/mm: Disable branch profiling in mem_encrypt.c
x86/asm: Fix inline asm call constraints for GCC 4.4
perf/x86/intel/uncore: Correct num_boxes for IIO and IRP
perf/x86/intel/rapl: Add missing CPU IDs
perf/x86/msr: Add missing CPU IDs
perf/x86/intel/cstate: Add missing CPU IDs
x86: Don't cast away the __user in __get_user_asm_u64()
x86/sysfs: Fix off-by-one error in loop termination
x86/mm: Fix fault error path using unsafe vma pointer
x86/numachip: Add const and __initconst to numachip2_clockevent
|
||
|
Andrey Ryabinin
|
196bd485ee |
x86/asm: Use register variable to get stack pointer value
Currently we use current_stack_pointer() function to get the value
of the stack pointer register. Since commit:
|
||
|
Tom Lendacky
|
bc829ee36e |
x86/mm: Disable branch profiling in mem_encrypt.c
Some routines in mem_encrypt.c are called very early in the boot process, e.g. sme_encrypt_kernel(). When CONFIG_TRACE_BRANCH_PROFILING=y is defined the resulting branch profiling associated with the check to see if SME is active results in a kernel crash. Disable branch profiling for mem_encrypt.c by defining DISABLE_BRANCH_PROFILING before including any header files. Reported-by: kernel test robot <lkp@01.org> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929162419.6016.53390.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
8474c532b5 |
Merge branch 'WIP.x86/fpu' into x86/fpu, because it's ready
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
e4a81bfcaa |
x86/fpu: Rename fpu::fpstate_active to fpu::initialized
The x86 FPU code used to have a complex state machine where both the FPU registers and the FPU state context could be 'active' (or inactive) independently of each other - which enabled features like lazy FPU restore. Much of this complexity is gone in the current code: now we basically can have FPU-less tasks (kernel threads) that don't use (and save/restore) FPU state at all, plus full FPU users that save/restore directly with no laziness whatsoever. But the fpu::fpstate_active still carries bits of the old complexity - meanwhile this flag has become a simple flag that shows whether the FPU context saving area in the thread struct is initialized and used, or not. Rename it to fpu::initialized to express this simplicity in the name as well. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-30-mingo@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Laurent Dufour
|
a3c4fb7c9c |
x86/mm: Fix fault error path using unsafe vma pointer
commit |
||
|
Eric Biggers
|
d5c8028b47 |
x86/fpu: Reinitialize FPU registers if restoring FPU state fails
Userspace can change the FPU state of a task using the ptrace() or rt_sigreturn() system calls. Because reserved bits in the FPU state can cause the XRSTOR instruction to fail, the kernel has to carefully validate that no reserved bits or other invalid values are being set. Unfortunately, there have been bugs in this validation code. For example, we were not checking that the 'xcomp_bv' field in the xstate_header was 0. As-is, such bugs are exploitable to read the FPU registers of other processes on the system. To do so, an attacker can create a task, assign to it an invalid FPU state, then spin in a loop and monitor the values of the FPU registers. Because the task's FPU registers are not being restored, sometimes the FPU registers will have the values from another process. This is likely to continue to be a problem in the future because the validation done by the CPU instructions like XRSTOR is not immediately visible to kernel developers. Nor will invalid FPU states ever be encountered during ordinary use --- they will only be seen during fuzzing or exploits. There can even be reserved bits outside the xstate_header which are easy to forget about. For example, the MXCSR register contains reserved bits, which were not validated by the KVM_SET_XSAVE ioctl until commit |
||
|
Ingo Molnar
|
f1c8cd0176 |
x86/fpu: Change fpu->fpregs_active users to fpu->fpstate_active
We want to simplify the FPU state machine by eliminating fpu->fpregs_active, and we can do that because the two state flags (::fpregs_active and ::fpstate_active) are set essentially together. The old lazy FPU switching code used to make a distinction - but there's no lazy switching code anymore, we always switch in an 'eager' fashion. Do this by first changing all substantial uses of fpu->fpregs_active to fpu->fpstate_active and adding a few debug checks to double check our assumption is correct. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-19-mingo@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
b3a163081c |
x86/fpu: Simplify fpu->fpregs_active use
The fpregs_active() inline function is pretty pointless - in almost all the callsites it can be replaced with a direct fpu->fpregs_active access. Do so and eliminate the extra layer of obfuscation. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20170923130016.21448-16-mingo@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Josh Poimboeuf
|
f5caf621ee |
x86/asm: Fix inline asm call constraints for Clang
For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:
static inline void foo()
{
register void *__sp asm(_ASM_SP);
asm("call bar" : "+r" (__sp))
}
Unfortunately, that pattern causes Clang to corrupt the stack pointer.
The fix is easy: convert the stack pointer register variable to a global
variable.
It should be noted that the end result is different based on the GCC
version. With GCC 6.4, this patch has exactly the same result as
before:
defconfig defconfig-nofp distro distro-nofp
before 9820389 9491555 8816046 8516940
after 9820389 9491555 8816046 8516940
With GCC 7.2, however, GCC's behavior has changed. It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm. (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.) It's a bit
overkill, but the performance impact should be negligible. And in fact,
there's a nice improvement with frame pointers disabled:
defconfig defconfig-nofp distro distro-nofp
before 9796316 9468236 9076191 8790305
after 9796957 9464267 9076381 8785949
So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Andy Lutomirski
|
47061a24e2 |
x86/mm: Factor out CR3-building code
Current, the code that assembles a value to load into CR3 is open-coded everywhere. Factor it out into helpers build_cr3() and build_cr3_noflush(). This makes one semantic change: __get_current_cr3_fast() was wrong on SME systems. No one noticed because the only caller is in the VMX code, and there are no CPUs with both SME and VMX. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <Thomas.Lendacky@amd.com> Link: http://lkml.kernel.org/r/ce350cf11e93e2842d14d0b95b0199c7d881f527.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Juergen Gross
|
87930019c7 |
x86/paravirt: Remove no longer used paravirt functions
With removal of lguest some of the paravirt functions are no longer needed: ->read_cr4() ->store_idt() ->set_pmd_at() ->set_pud_at() ->pte_update() Remove them. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: chrisw@sous-sol.org Cc: jeremy@goop.org Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170904102527.25409-1-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andy Lutomirski
|
c7ad5ad297 |
x86/mm/64: Initialize CR4.PCIDE early
cpu_init() is weird: it's called rather late (after early
identification and after most MMU state is initialized) on the boot
CPU but is called extremely early (before identification) on secondary
CPUs. It's called just late enough on the boot CPU that its CR4 value
isn't propagated to mmu_cr4_features.
Even if we put CR4.PCIDE into mmu_cr4_features, we'd hit two
problems. First, we'd crash in the trampoline code. That's
fixable, and I tried that. It turns out that mmu_cr4_features is
totally ignored by secondary_start_64(), though, so even with the
trampoline code fixed, it wouldn't help.
This means that we don't currently have CR4.PCIDE reliably initialized
before we start playing with cpu_tlbstate. This is very fragile and
tends to cause boot failures if I make even small changes to the TLB
handling code.
Make it more robust: initialize CR4.PCIDE earlier on the boot CPU
and propagate it to secondary CPUs in start_secondary().
( Yes, this is ugly. I think we should have improved mmu_cr4_features
to actually control CR4 during secondary bootup, but that would be
fairly intrusive at this stage. )
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes:
|
||
|
Andy Lutomirski
|
a376e7f99b |
x86/mm: Get rid of VM_BUG_ON in switch_tlb_irqs_off()
If we hit the VM_BUG_ON(), we're detecting a genuinely bad situation, but we're very unlikely to get a useful call trace. Make it a warning instead. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Jiri Kosina <jikos@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3b4e06bbb382ca54a93218407c93925ff5871546.1504847163.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
680352bda5 |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar: "Two fixes: dead code removal, plus a SME memory encryption fix on 32-bit kernels that crashed Xen guests" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Remove unused and undefined __generic_processor_info() declaration x86/mm: Make the SME mask a u64 |
||
|
Andy Lutomirski
|
7898f79654 |
x86/mm/64: Fix an incorrect warning with CONFIG_DEBUG_VM=y, !PCID
I've been staring at the word PCID too long.
Fixes: f13c8e8c58ba ("x86/mm: Reinitialize TLB state on hotplug and resume")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Michal Hocko
|
3072e413e3 |
mm/memory_hotplug: introduce add_pages
There are new users of memory hotplug emerging. Some of them require different subset of arch_add_memory. There are some which only require allocation of struct pages without mapping those pages to the kernel address space. We currently have __add_pages for that purpose. But this is rather lowlevel and not very suitable for the code outside of the memory hotplug. E.g. x86_64 wants to update max_pfn which should be done by the caller. Introduce add_pages() which should care about those details if they are needed. Each architecture should define its implementation and select CONFIG_ARCH_HAS_ADD_PAGES. All others use the currently existing __add_pages. Link: http://lkml.kernel.org/r/20170817000548.32038-7-jglisse@redhat.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Borislav Petkov
|
21d9bb4a05 |
x86/mm: Make the SME mask a u64
The SME encryption mask is for masking 64-bit pagetable entries. It
being an unsigned long works fine on X86_64 but on 32-bit builds in
truncates bits leading to Xen guests crashing very early.
And regardless, the whole SME mask handling shouldnt've leaked into
32-bit because SME is X86_64-only feature. So, first make the mask u64.
And then, add trivial 32-bit versions of the __sme_* macros so that
nothing happens there.
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tom Lendacky <Thomas.Lendacky@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas <Thomas.Lendacky@amd.com>
Fixes:
|
||
|
Andy Lutomirski
|
72c0098d92 |
x86/mm: Reinitialize TLB state on hotplug and resume
When Linux brings a CPU down and back up, it switches to init_mm and then
loads swapper_pg_dir into CR3. With PCID enabled, this has the side effect
of masking off the ASID bits in CR3.
This can result in some confusion in the TLB handling code. If we
bring a CPU down and back up with any ASID other than 0, we end up
with the wrong ASID active on the CPU after resume. This could
cause our internal state to become corrupt, although major
corruption is unlikely because init_mm doesn't have any user pages.
More obviously, if CONFIG_DEBUG_VM=y, we'll trip over an assertion
in the next context switch. The result of *that* is a failure to
resume from suspend with probability 1 - 1/6^(cpus-1).
Fix it by reinitializing cpu_tlbstate on resume and CPU bringup.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Jiri Kosina <jikos@kernel.org>
Fixes:
|
||
|
Linus Torvalds
|
24e700e291 |
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"This update provides:
- Cleanup of the IDT management including the removal of the extra
tracing IDT. A first step to cleanup the vector management code.
- The removal of the paravirt op adjust_exception_frame. This is a
XEN specific issue, but merged through this branch to avoid nasty
merge collisions
- Prevent dmesg spam about the TSC DEADLINE bug, when the CPU has
disabled the TSC DEADLINE timer in CPUID.
- Adjust a debug message in the ioapic code to print out the
information correctly"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
x86/idt: Fix the X86_TRAP_BP gate
x86/xen: Get rid of paravirt op adjust_exception_frame
x86/eisa: Add missing include
x86/idt: Remove superfluous ALIGNment
x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on CPUs without the feature
x86/idt: Remove the tracing IDT leftovers
x86/idt: Hide set_intr_gate()
x86/idt: Simplify alloc_intr_gate()
x86/idt: Deinline setup functions
x86/idt: Remove unused functions/inlines
x86/idt: Move interrupt gate initialization to IDT code
x86/idt: Move APIC gate initialization to tables
x86/idt: Move regular trap init to tables
x86/idt: Move IST stack based traps to table init
x86/idt: Move debug stack init to table based
x86/idt: Switch early trap init to IDT tables
x86/idt: Prepare for table based init
x86/idt: Move early IDT setup out of 32-bit asm
x86/idt: Move early IDT handler setup to IDT code
x86/idt: Consolidate IDT invalidation
...
|
||
|
Linus Torvalds
|
b1b6f83ac9 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar:
"PCID support, 5-level paging support, Secure Memory Encryption support
The main changes in this cycle are support for three new, complex
hardware features of x86 CPUs:
- Add 5-level paging support, which is a new hardware feature on
upcoming Intel CPUs allowing up to 128 PB of virtual address space
and 4 PB of physical RAM space - a 512-fold increase over the old
limits. (Supercomputers of the future forecasting hurricanes on an
ever warming planet can certainly make good use of more RAM.)
Many of the necessary changes went upstream in previous cycles,
v4.14 is the first kernel that can enable 5-level paging.
This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
default.
(By Kirill A. Shutemov)
- Add 'encrypted memory' support, which is a new hardware feature on
upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
RAM to be encrypted and decrypted (mostly) transparently by the
CPU, with a little help from the kernel to transition to/from
encrypted RAM. Such RAM should be more secure against various
attacks like RAM access via the memory bus and should make the
radio signature of memory bus traffic harder to intercept (and
decrypt) as well.
This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
by default.
(By Tom Lendacky)
- Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
hardware feature that attaches an address space tag to TLB entries
and thus allows to skip TLB flushing in many cases, even if we
switch mm's.
(By Andy Lutomirski)
All three of these features were in the works for a long time, and
it's coincidence of the three independent development paths that they
are all enabled in v4.14 at once"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
x86/mm: Use pr_cont() in dump_pagetable()
x86/mm: Fix SME encryption stack ptr handling
kvm/x86: Avoid clearing the C-bit in rsvd_bits()
x86/CPU: Align CR3 defines
x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
acpi, x86/mm: Remove encryption mask from ACPI page protection type
x86/mm, kexec: Fix memory corruption with SME on successive kexecs
x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
x86/mm: Allow userspace have mappings above 47-bit
x86/mm: Prepare to expose larger address space to userspace
x86/mpx: Do not allow MPX if we have mappings above 47-bit
x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
x86/mm/dump_pagetables: Fix printout of p4d level
x86/mm/dump_pagetables: Generalize address normalization
x86/boot: Fix memremap() related build failure
...
|
||
|
Linus Torvalds
|
5f82e71a00 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar: - Add 'cross-release' support to lockdep, which allows APIs like completions, where it's not the 'owner' who releases the lock, to be tracked. It's all activated automatically under CONFIG_PROVE_LOCKING=y. - Clean up (restructure) the x86 atomics op implementation to be more readable, in preparation of KASAN annotations. (Dmitry Vyukov) - Fix static keys (Paolo Bonzini) - Add killable versions of down_read() et al (Kirill Tkhai) - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini) - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra) - Remove smp_mb__before_spinlock() and convert its usages, introduce smp_mb__after_spinlock() (Peter Zijlstra) * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits) locking/lockdep/selftests: Fix mixed read-write ABBA tests sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK() acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures smp: Avoid using two cache lines for struct call_single_data locking/lockdep: Untangle xhlock history save/restore from task independence locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being futex: Remove duplicated code and fix undefined behaviour Documentation/locking/atomic: Finish the document... locking/lockdep: Fix workqueue crossrelease annotation workqueue/lockdep: 'Fix' flush_work() annotation locking/lockdep/selftests: Add mixed read-write ABBA tests mm, locking/barriers: Clarify tlb_flush_pending() barriers locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive locking/lockdep: Explicitly initialize wq_barrier::done::map locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING locking/refcounts, x86/asm: Implement fast refcount overflow protection locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease ... |
||
|
Linus Torvalds
|
f29139bf10 |
Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug updates from Ingo Molnar: "Various fixes to the NUMA emulation code" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/numa_emulation: Recalculate numa_nodes_parsed from emulated nodes x86/numa_emulation: Assign physnode_mask directly from numa_nodes_parsed x86/numa_emulation: Refine the calculation of max_emu_nid and dfl_phys_nid |
||
|
Linus Torvalds
|
b0c79f49c3 |
Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar: - Introduce the ORC unwinder, which can be enabled via CONFIG_ORC_UNWINDER=y. The ORC unwinder is a lightweight, Linux kernel specific debuginfo implementation, which aims to be DWARF done right for unwinding. Objtool is used to generate the ORC unwinder tables during build, so the data format is flexible and kernel internal: there's no dependency on debuginfo created by an external toolchain. The ORC unwinder is almost two orders of magnitude faster than the (out of tree) DWARF unwinder - which is important for perf call graph profiling. It is also significantly simpler and is coded defensively: there has not been a single ORC related kernel crash so far, even with early versions. (knock on wood!) But the main advantage is that enabling the ORC unwinder allows CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel measurably: With frame pointers disabled, GCC does not have to add frame pointer instrumentation code to every function in the kernel. The kernel's .text size decreases by about 3.2%, resulting in better cache utilization and fewer instructions executed, resulting in a broad kernel-wide speedup. Average speedup of system calls should be roughly in the 1-3% range - measurements by Mel Gorman [1] have shown a speedup of 5-10% for some function execution intense workloads. The main cost of the unwinder is that the unwinder data has to be stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel config - which is a modest cost on modern x86 systems. Given how young the ORC unwinder code is it's not enabled by default - but given the performance advantages the plan is to eventually make it the default unwinder on x86. See Documentation/x86/orc-unwinder.txt for more details. - Remove lguest support: its intended role was that of a temporary proof of concept for virtualization, plus its removal will enable the reduction (removal) of the paravirt API as well, so Rusty agreed to its removal. (Juergen Gross) - Clean up and fix FSGS related functionality (Andy Lutomirski) - Clean up IO access APIs (Andy Shevchenko) - Enhance the symbol namespace (Jiri Slaby) * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) objtool: Handle GCC stack pointer adjustment bug x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone() x86/fpu/math-emu: Add ENDPROC to functions x86/boot/64: Extract efi_pe_entry() from startup_64() x86/boot/32: Extract efi_pe_entry() from startup_32() x86/lguest: Remove lguest support x86/paravirt/xen: Remove xen_patch() objtool: Fix objtool fallthrough detection with function padding x86/xen/64: Fix the reported SS and CS in SYSCALL objtool: Track DRAP separately from callee-saved registers objtool: Fix validate_branch() return codes x86: Clarify/fix no-op barriers for text_poke_bp() x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs selftests/x86/fsgsbase: Test selectors 1, 2, and 3 x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common x86/asm: Fix UNWIND_HINT_REGS macro for older binutils x86/asm/32: Fix regs_get_register() on segment registers x86/xen/64: Rearrange the SYSCALL entries x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads ... |