GK20A's initialization was based on GK104, but differences exist in the
way the initial context is built and the initialization process itself.
This patch follows the same initialization sequence as nvgpu performs
to avoid bad surprises. Since the register bundles initialization also
differ considerably from GK104, the register packs are now loaded from
firmware files, again similarly to what is done with nvgpu.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVIDIA will officially start providing GR firmwares through
linux-firmware for GPUs that require it. Change the GR firmware lookup
function to use these files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These signals and sources have been reverse engineered from CUPTI
(Linux). Graphics signals exposed by PerfKit (Windows only) will be
added later. I need to reverse engineer them and it's a bit painful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This trivial patch makes thing more consistent since hardware signals
names are prefixed by 'pcXX'.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is going to be very useful for GF100+ because each GPC can
have its own domain of counters.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
According to the tstate calculation in nvkm_clk_tstate(),
the range of tstate is from -(clk->state_nr - 1) to 0,
it mean the tstate is negative value. But in nvkm_pstate_work(),
it use (clk->state_nr - 1 - clk->tstate) to limit pstate,
it's not correct.
This patch fix it to use (clk->state_nr - 1 + clk->tstate) to
limit pstate.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These signals and sources have been reverse engineered from CUPTI
(Linux). Graphics signals exposed by PerfKit (Windows only) will be
added later. I need to reverse engineer them and it's a bit painful.
This commit also adds a new class for GF108 and GF117.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These signals and sources have been reverse engineered from NVIDIA
PerfKit (Windows) and CUPTI (Linux), they will be used to build complex
hardware events from the userspace.
This commit also adds a new class for GT200.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Configuring counters from the userspace require the kernel to handle some
logic related to performance counters. Basically, it has to find a free
slot to assign a counter, to handle extra counting modes like B4/B6 and it
must return and error when it can't configure a counter.
In my opinion, the kernel should not handle all of that logic but it
should only write the configuration sent by the userspace without
checking anything. In other words, it should overwrite the configuration
even if it's already counting and do not return any errors.
This patch allows the userspace to configure a domain instead of
separate counters. This has the advantage to move all of the logic to
the userspace.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds a new method NVIF_PERFCTR_V0_INIT which starts a batch of
hardware counters for sampling. This will allow the userspace to start
a monitoring session using the INIT method and to stop it with SAMPLE,
for example before and after a frame is rendered.
This commit temporarily breaks nv_perfmon but this is going to be fixed
with the upcoming patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This allows to query the ID, the mask and the user-readable name of
sources for each signal.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A source (or multiplexer) is a tuple addr+mask+shift which allows to
control a block of signals. The maximum number of sources that a signal
can define is arbitrary limited to 8 and this should be large enough.
This patch allows to define multi-level of sources for a signal.
Each different sources are stored to a global list and will be exposed
to the userspace through the nvif interface in order to avoid conflicts.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This signal index must be always allowed even if it's not clearly
defined in a domain in order to monitor a counter like 0x03020100
because it's the default value of signals.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
16 bits is large enough to store the maximum number of signals available
for one domain (i.e. 256).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will allow to configure performance counters with hardware signal
indexes instead of user-readable names in an upcoming patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This allows to query the number of available domains, including the
number of hardware counter and the number of signals per domain.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since a new class has been introduced to query signals, we can now
return an error when the userspace wants to monitor unknown signals.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This commit introduces the NVIF_IOCTL_NEW_V0_PERFMON class which will be
used in order to query domains, signals and sources. This separates the
querying and the counting interface.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
PDAEMON signals don't have to be exposed by the perfmon engine.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested on a few cards. Probably works quite well for most, given they should
all be GDDR3.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This looks surprisingly similar to scripts on earlier cards as well
but they don't seem to work just yet. That... and I don't have any, which
makes it a tough job to reverse engineer.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some of the bits in there are similar to the bits in the gt215 rammap.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Might need some generalisation to < GT200. For those: use at your own risk!
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation of NV50 reclocking, where there is no version
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Here are some development updates for the Synopsis Designware HDMI driver,
which clean up some of the code, and start preparing to add audio support
to the driver. This series of patches are based on a couple of dependent
commits from the ALSA tree.
Briefly, the updates are:
- move comments which should have moved with the phy values to the IMX
part of the driver.
- clean up the phy configuration: to all lookups before starting to
program the phy.
- clean up the HDMI clock regenerator code
- use the drm_hdmi_avi_infoframe_from_display_mode() helper which allows
the code to be subsequently simplified
- remove the unused 'regmap' pointer in struct dw_hdmi
- use the bridge drm device rather than the connector (we're the bridge
code)
- remove private hsync/vsync/interlaced flags, getting them from the
DRM mode structure instead.
- implement interface functions to support audio - setting the audio
sample rate, and enabling the audio clocks.
- removal of broken pixel repetition support
- cleanup DVI vs HDMI sink handling
- enable audio only if connected device supports audio
- avoid double-enabling bridge in the sink path (once in mode_set, and
again in commit)
- rename mis-named dw_hdmi_phy_enable_power()
- fix bridge enable/disable handing, so a plug-in event doesn't
reconfigure the bridge if DRM has disabled the output
- fix from Vladimir Zapolskiy for the I2CM_ADDRESS macro name
These are primerily preparitory patches for the AHB audio driver and
the I2S audio driver (from Rockchip) for this IP.
* 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm: bridge/dw_hdmi: fix register I2CM_ADDRESS register name
drm: bridge/dw_hdmi: fix phy enable/disable handling
drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power()
drm: bridge/dw_hdmi: avoid enabling interface in mode_set
drm: bridge/dw_hdmi: enable audio only if sink supports audio
drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling
drm: bridge/dw_hdmi: don't support any pixel doubled modes
drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs
drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio
drm: bridge/dw_hdmi: introduce interface to setting sample rate
drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced
drm: bridge/dw_hdmi: use our own drm_device
drm: bridge/dw_hdmi: remove unused 'regmap' struct member
drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little
drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode()
drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator()
drm: bridge/dw_hdmi: clean up phy configuration
drm: imx/dw_hdmi: move phy comments
drm/edid: add function to help find SADs
Pull request of 15-08-21
The third pull request for 4.3. Contains two fixes for regressions introduced
with previous pull requests.
* tag 'vmwgfx-next-15-08-21' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Remove duplicate ttm_bo_device_release
drm/vmwgfx: Fix a circular locking dependency in the fbdev code
- DP fixes for radeon and amdgpu
- IH ring fix for tonga and fiji
- Lots of GPU scheduler fixes
- Misc additional fixes
* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux: (42 commits)
drm/amdgpu: fix wait queue handling in the scheduler
drm/amdgpu: remove extra parameters from scheduler callbacks
drm/amdgpu: wake up scheduler only when neccessary
drm/amdgpu: remove entity idle timeout v2
drm/amdgpu: fix postclose order
drm/amdgpu: use IB for copy buffer of eviction
drm/amdgpu: adjust the judgement of removing fence callback
drm/amdgpu: fix no sync_wait in copy_buffer
drm/amdgpu: fix last_vm_update fence is not effetive for sched fence
drm/amdgpu: add priv data to sched
drm/amdgpu: add owner for sched fence
drm/amdgpu: remove entity reference from sched fence
drm/amdgpu: fix and cleanup amd_sched_entity_push_job
drm/amdgpu: remove amdgpu_bo_list_clone
drm/amdgpu: remove the context from amdgpu_job
drm/amdgpu: remove unused parameters to amd_sched_create
drm/amdgpu: remove sched_lock
drm/amdgpu: remove prepare_job callback
drm/amdgpu: cleanup a scheduler function name
drm/amdgpu: reorder scheduler functions
...
Freeing up a queue after signalling it isn't race free.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Removing the entity from scheduling can deadlock the whole system.
Wait forever till the remaining IBs are scheduled.
v2: fix comment as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
The context needs to finish before everything else.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
This aids handling buffers moves with the scheduler.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
The fence in the array may be skipped if wait_all is false,
thus the related callback is not initialized with list head.
So removing this kind callback will cause NULL pointer reference.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>