Provides helper functions for drivers that have a simple display
pipeline. Plane, crtc and encoder are collapsed into one entity.
Changes since v4:
- Remove drm_connector_register() call
- Forgot to assign pipe->connector
Changes since v3:
- (struct drm_simple_display_pipe *)->funcs should be const
Changes since v2:
- Drop Kconfig knob DRM_KMS_HELPER
- Expand documentation
Changes since v1:
- Add DOC header and add to gpu.tmpl
- Fix docs: @funcs is optional, "negative error code",
"This hook is optional."
- Add checks to drm_simple_kms_plane_atomic_check()
Cc: jsarha@ti.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465570559-14238-1-git-send-email-noralf@tronnes.org
I see the main drm pull got merged, here's the first batch of fixes for
4.7 already. Fixes all around, a large portion cc: stable stuff.
[airlied: the DP++ stuff is a regression fix].
* tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Stop automatically retiring requests after a GPU hang
drm/i915: Unify intel_ring_begin()
drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)
drm/i915/psr: Try to program link training times correctly
drm/i915/bxt: Adjusting the error in horizontal timings retrieval
drm/i915: Don't leave old junk in ilk active watermarks on readout
drm/i915: s/DPPL/DPLL/ for SKL DPLLs
drm/i915: Fix gen8 semaphores id for legacy mode
drm/i915: Set crtc_state->lane_count for HDMI
drm/i915/BXT: Retrieving the horizontal timing for DSI
drm/i915: Protect gen7 irq_seqno_barrier with uncore lock
drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed
drm/i915: Respect DP++ adaptor TMDS clock limit
drm: Add helper for DP++ adaptors
Add a helper which aids in the identification of DP dual mode
(aka. DP++) adaptors. There are several types of adaptors
specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI
Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors
may go as high as 300MHz and they provide a register informing the
source device what the actual limit is. Supposedly also type 1 adaptors
may optionally implement this register. This TMDS clock limit is the
main reason why we need to identify these adaptors.
Type 1 adaptors provide access to their internal registers and the sink
DDC bus through I2C. Type 2 adaptors provide this access both via I2C
and I2C-over-AUX. A type 2 source device may choose to implement either
of these methods. If a source device implements the I2C-over-AUX
method, then the driver will obviously need specific support for such
adaptors since the port is driven like an HDMI port, but DDC
communication happes over the AUX channel.
This helper should be enough to identify the adaptor type (some
type 1 DVI adaptors may be a slight exception) and the maximum TMDS
clock limit. Another feature that may be available is control over
the TMDS output buffers on the adaptor, possibly allowing for some
power saving when the TMDS link is down.
Other user controllable features that may be available in the adaptors
are downstream i2c bus speed control when using i2c-over-aux, and
some control over the CEC pin. I chose not to provide any helper
functions for those since I have no use for them in i915 at this time.
The rest of the registers in the adaptor are mostly just information,
eg. IEEE OUI, hardware and firmware revision, etc.
v2: Pass adaptor type to helper functions to ease driver implementation
Fix a bunch of typoes (Paulo)
Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know
the type (Paulo)
Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo)
Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to
ease future LSPCON enabling
Remove the unused DP_DUAL_MODE_LAST_RESERVED define
v3: Fix kernel doc function argument descriptions (Jani)
s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs
Add kernel doc for enum drm_dp_dual_mode_type
Actually build the docs
Fix more typoes
v4: Adjust code indentation of type2 adaptor detection (Shashank)
Add debug messages for failurs cases (Shashank)
v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo)
Cc: stable@vger.kernel.org
Cc: Tore Anderson <tore@fud.no>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit ede53344db)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch adds an initial DRM driver for the Mediatek MT8173 DISP
subsystem. It currently supports two fixed output streams from the
OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Mao Huang <littlecvr@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add kirin DRM master driver for hi6220 SoC which used in HiKey board.
Add dumb buffer feature.
Add prime dmabuf feature.
v9: Add OF and ARM64 depends on in Kconfig
v8: None.
v7:
- Add config.mutex protection when accessing mode_config.connector_list.
- Clean up match data getting.
v6: None.
v5: None.
v4: None.
v3:
- Move and rename all the files to kirin sub-directory.
So that we could separate different seires SoCs' driver.
- Replace drm_platform_init, load, unload implementation.
v2:
- Remove abtraction layer.
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.
Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
ARC PGU could be found on some development boards from Synopsys.
This is a simple byte streamer that reads data from a framebuffer
and sends data to the single encoder.
Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-snps-arc@lists.infradead.org
Misc stuff all over:
- more mode_fixup removal from Carlos, there's another final pile still
left.
- final bits of vgaswitcheroo from Lukas for apple gmux, we're still
discussing an api cleanup patch to make it a bit more abuse-safe as a
follow-up
- dp aux interface for userspace for tools&tests from Rafael Antognolli
- actual interface parts for dma-buf flushing for userspace mmap
- few small bits all over
- vgaswitcheroo support for apple gmux from Lukas Wunner
- checks for ->mode_fixup in non-atomic helpers from Carlos Palminha, plus
removing dummy funcs from drivers. Carlos promised to follow up with
more, since there's lots more silly dummy functions around.
- dma-buf patches from Tiago, except the ioctl itself (that needed a
respin to address review from David Herrmann)
- encoder mask for atomic from Maarten
- bunch of random things all over.
* tag 'topic/drm-misc-2016-02-18' of git://anongit.freedesktop.org/drm-intel: (57 commits)
drm/udl: Use module_usb_driver
drm: fixes crct set_mode when crtc mode_fixup is null.
drm/tilcdc: removed optional dummy encoder mode_fixup function.
drm/sti: removed optional dummy encoder mode_fixup function.
drm/rockchip: removed optional dummy encoder mode_fixup function.
drm/qxl: removed optional dummy encoder mode_fixup function.
drm/mgag200: removed optional dummy encoder mode_fixup function.
drm/msm/mdp: removed optional dummy encoder mode_fixup function.
drm/imx: removed optional dummy encoder mode_fixup function.
drm/gma500: removed optional dummy encoder mode_fixup function.
drm/radeon: removed optional dummy encoder mode_fixup function.
drm/cirrus: removed optional dummy encoder mode_fixup function.
drm/bochs: removed optional dummy encoder mode_fixup function.
drm/ast: removed optional dummy encoder mode_fixup function.
drm/amdgpu: removed optional dummy encoder mode_fixup function.
drm/exynos: removed optional dummy encoder mode_fixup function.
drm/udl: removed optional dummy encoder mode_fixup function.
drm/virtio: removed optional dummy encoder mode_fixup function.
drm/fb_helper: Use add_one_connector in add_all_connectors.
drm/fb_helper: Use correct allocation count for arrays.
...
This module is heavily based on i2c-dev. Once loaded, it provides one
dev node per DP AUX channel, named drm_dp_auxN, where N is an integer.
It's possible to know which connector owns this aux channel by looking
at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if
the connector device pointer was correctly set in the aux helper struct.
Two main operations are provided on the registers read and write. The
address of the register to be read or written is given using lseek. The
seek position is updated upon read or write.
v2:
- lseek is used to select the register to read/write
- read/write are used instead of ioctl
- no blocking_notifier is used, just a direct callback
v3:
- use drm_dp_aux_dev prefix for public functions
- chardev is named drm_dp_auxN
- read/write don't allocate a buffer anymore, and transfer up to 16 bytes a
time
- remove notifier list from the implementation
- option on menuconfig is now a boolean
- add inline stub functions to avoid breakage when this option is disabled
v4:
- fix build system changes - actually disable this module when not selected.
v5:
- Use kref to avoid device closing while still in use
- Don't use list, use an idr for storing aux_dev
- Remove "connector" attribute
- set aux.dev to the connector drm_connector device, instead of
drm_device
v6:
- Use atomic_t for usage count
- Use a mutex instead of spinlock for idr lock
- Destroy chardev immediately on unregister
- other minor suggestions from Ville
v7:
- style fixes
- error handling fixes
v8:
- more error handling fixes
v9:
- remove module_init and module_exit, and add drm_dp_aux_dev_init/exit
to drm_kms_helper_init/exit.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
The module_init and module_exit functions will start here, and call the
subsequent init's and exit's.
v10:
- Keep __init on drm_fb_helper init function.
- Move MODULE_* macros to the common file.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-2-git-send-email-rafael.antognolli@intel.com
The HDLCD controller is a display controller that supports resolutions
up to 4096x4096 pixels. It is present on various development boards
produced by ARM Ltd and emulated by the latest Fast Models from the
company.
Cc: David Airlie <airlied@linux.ie>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
[Kconfig cleanup and !CONFIG_PM fixes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull kbuild updates from Michal Marek:
- Make <modname>-m in makefiles work like <modname>-y and fix the
fallout
- Minor genksyms fix
- Fix race with make -j install modules_install
- Move -Wsign-compare from make W=1 to W=2
- Other minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Demote 'sign-compare' warning to W=2
Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
kbuild: Do not run modules_install and install in paralel
genksyms: Handle string literals with spaces in reference files
fixdep: constify strrcmp arguments
ath10k: Fix build with CONFIG_THERMAL=m
Revert "drm: Hack around CONFIG_AGP=m build failures"
kbuild: Allow to specify composite modules with modname-m
staging/ad7606: Actually build the interface modules
* pxafb: device-tree support
* An unsafe kernel parameter 'lockless_register_fb' for debugging problems
happening while inside the console lock
* Small miscellaneous fixes & cleanups
* omapdss: add writeback support functions
* Separation of omapfb and omapdrm (see below)
About the separation of omapfb and omapdrm, see
http://permalink.gmane.org/gmane.comp.video.dri.devel/143151 for longer story.
The short version:
omapfb and omapdrm have shared low level drivers (omapdss and panel drivers),
making further development of omapdrm difficult. After these patches omapfb and
omapdrm have their own versions of the drivers, which are more or less
direct copies for now but will diverge soon.
This also means that omapfb (everything under drivers/video/fbdev/omap2/) is
now in maintenance mode, and all new development will be done for omapdrm
(drivers/gpu/drm/omapdrm/).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Nrji
-----END PGP SIGNATURE-----
Merge tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev updates from Tomi Valkeinen:
"Summary:
- pxafb: device-tree support
- An unsafe kernel parameter 'lockless_register_fb' for debugging
problems happening while inside the console lock
- Small miscellaneous fixes & cleanups
- omapdss: add writeback support functions
- Separation of omapfb and omapdrm (see below)
About the separation of omapfb and omapdrm, see
http://permalink.gmane.org/gmane.comp.video.dri.devel/143151
for longer story. The short version:
omapfb and omapdrm have shared low level drivers (omapdss and panel
drivers), making further development of omapdrm difficult. After
these patches omapfb and omapdrm have their own versions of the
drivers, which are more or less direct copies for now but will diverge
soon.
This also means that omapfb (everything under drivers/video/fbdev/omap2/)
is now in maintenance mode, and all new development will be done for
omapdrm (drivers/gpu/drm/omapdrm/)"
* tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (49 commits)
video: fbdev: pxafb: fix out of memory error path
drm/omap: make omapdrm select OMAP2_DSS
drm/omap: move omapdss & displays under omapdrm
omapfb: move vrfb into omapfb
omapfb: take omapfb's private omapdss into use
omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_*
omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP*
omapdss: remove CONFIG_OMAP2_DSS_VENC from omapdss.h
omapfb: copy omapdss & displays for omapfb
omapfb: allow compilation only if DRM_OMAP is disabled
fbdev: omap2: panel-dpi: simplify gpio setting
fbdev: omap2: panel-dpi: in .disable first disable backlight then display
OMAPDSS: DSS: fix a warning message
video: omapdss: delete unneeded of_node_put
OMAPDSS: DISPC: Remove boolean comparisons
OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK define
OMAPDSS: remove extra out == NULL checks
OMAPDSS: change internal dispc functions to static
OMAPDSS: make a two dss feat funcs internal to omapdss
OMAPDSS: remove extra EXPORT_SYMBOLs
...
Now that omapfb has its own copy of omapdss and display drivers, we can
move omapdss and display drivers which omapdrm uses to omapdrm's
directory.
We also need to change the main drm Makefile so that omapdrm directory
is always entered, because omapdss has a file that can't be built as a
module.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
This adds the etnaviv DRM driver and hooks it up in Makefiles
and Kconfig.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This pull request introduces the vc4 driver, for kernel modesetting on
the Raspberry Pi (bcm2835/bcm2836 architectures). It currently
supports a display plane and cursor on the HDMI output. The driver
doesn't do 3D, power management, or overlay planes yet.
[airlied: fixup the enable/disable vblank APIs]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-vc4-next-2015-10-21' of http://github.com/anholt/linux:
drm/vc4: Allow vblank to be disabled
drm/vc4: Use the fbdev_cma helpers
drm/vc4: Add KMS support for Raspberry Pi.
drm/vc4: Add devicetree bindings for VC4.
This is enough for fbcon and bringing up X using
xf86-video-modesetting. It doesn't support the 3D accelerator or
power management yet.
v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init
ordering instead of using the .load hook. Structure registration
more like tegra's, but still using the typical "component" code.
Drop no-op hooks for atomic_begin and mode_fixup() now that
they're optional. Drop sentinel in Makefile. Fix minor style
nits I noticed on another reread.
v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
of having a fixed video mode. Use exynos-style component driver
matching instead of devicetree nodes to list the component driver
instances. Rename compatibility strings to say bcm2835, and
distinguish pv0/1/2. Clean up some h/vsync code, and add in
interlaced mode setup. Fix up probe/bind error paths. Use
bitops.h macros for vc4_regs.h
v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
that other bugs have been fixed, add timeouts to cpu_relax()
loops, rename hpd-gpio to hpd-gpios.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Surprisingly kbuild can't cope with tristates in the
<module>-$(CONFIG_FOO) pattern. This patch hacks up a solution.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michal Marek <mmarek@suse.com>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We already express the drm/agp depencies correctly in Kconfig, so we
can rip this remnant from the shared drm core days.
Aside: Pretty much all the #ifdefs in radeon/nouveau could be killed
if ttm would provide dummy functions. I'm not going to volunteer for
that though.
v2: Use IS_ENABLED(CONFIG_AGP) as suggested by Ville
v3: Polish from Ville's review.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch add support for Two Dimensional Animation and Compositing
Engine (2D-ACE) on the Freescale SoCs.
2D-ACE is a Freescale display controller. 2D-ACE describes
the functionality of the module extremely well its name is a value
that cannot be used as a token in programming languages.
Instead the valid token "DCU" is used to tag the register names and
function names.
The Display Controller Unit (DCU) module is a system master that
fetches graphics stored in internal or external memory and displays
them on a TFT LCD panel. A wide range of panel sizes is supported
and the timing of the interface signals is highly configurable.
Graphics are read directly from memory and then blended in real-time,
which allows for dynamic content creation with minimal CPU
intervention.
The features:
(1) Full RGB888 output to TFT LCD panel.
(2) Blending of each pixel using up to 4 source layers
dependent
on size of panel.
(3) Each graphic layer can be placed with one pixel resolution
in either axis.
(4) Each graphic layer support RGB565 and RGB888 direct colors
without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct
colors
with an alpha channel and YUV422 format.
(5) Each graphic layer support alpha blending with 8-bit
resolution.
This is a simplified version, only one primary plane, one
framebuffer, one crtc, one connector and one encoder for TFT
LCD panel.
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Legacy fbdev emulation support via DRM is achieved through KMS FB helpers.
Most modesetting drivers enable provide fbdev emulation by default by
selecting KMS FB helpers. A few provide a separate Kconfig option for the
user to enable or disbale fbdev emulation.
Enabling fbdev emulation is finally a distro-level decision. Having a top
level Kconfig option for fbdev emulation helps by providing a uniform way
to enable/disable fbdev emulation for any modesetting driver. It also lets
us remove unnecessary driver specific Kconfig options that causes bloat.
With a top level Kconfig in place, we can stub out the fb helper functions
when not needed without breaking functionality. Having stub functions also
prevents drivers to require wrapping fb helper function calls with #ifdefs.
DRM_FBDEV_EMULATION defaults to y since many drivers enable fbdev
emulation by default and majority of distributions expect the fbdev
interface in the kernel.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This adds the non-asic specific core driver code.
v2: remove extra kconfig option
v3: implement minor fixes from Fengguang Wu
v4: fix cast in amdgpu_ucode.c
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yay, thanks to Gerd for pull this together.
* 'virtio-gpu-drm-next' of git://git.kraxel.org/linux:
Add MAINTAINERS entry for virtio-gpu.
Add virtio gpu driver.
drm_vblank_get: don't WARN_ON in case vblanks are not initialized
break kconfig dependency loop
Please pull the contents of "Use DRM component API in tilcdc to
connect to tda998x" patch series.
* 'linux-4.1.0-rc5-tilcdc-refactor' of https://github.com/jsarha/linux:
drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT
drm/tilcdc: Add DRM_TILCDC_SLAVE_COMPAT for ti,tilcdc,slave binding support
drm/tilcdc: use pm_runtime_irq_safe()
drm/tilcdc: Add support for external tda998x encoder
drm/tilcdc: Remove tilcdc slave support for tda998x driver
drm/tilcdc: Fix module unloading
This patch adds a kms driver for the virtio gpu. The xorg modesetting
driver can handle the device just fine, the framebuffer for fbcon is
there too.
Qemu patches for the host side are under review currently.
The pci version of the device comes in two variants: with and without
vga compatibility. The former has a extra memory bar for the vga
framebuffer, the later is a pure virtio device. The only concern for
this driver is that in the virtio-vga case we have to kick out the
firmware framebuffer.
Initial revision has only 2d support, 3d (virgl) support requires
some more work on the qemu side and will be added later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
If I read Documentation/kbuild/makefiles.txt section 3.6 right, this
patch should not be needed. However, without this patch the objects
needed for DRM_TILCDC_SLAVE_COMPAT are not linked, if DRM_TILCDC is
built as module.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This results in a warning when building out of tree:
"cc1: warning: include/drm: No such file or directory [enabled by default]"
Most code already uses #include <drm/foo.h> correctly, so fix the
instances that don't.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch implements the virtual GEM driver with PRIME sharing which
allows vgem to import a gem object from other drivers for the purpose
of mmap-ing them to userspace. The mmap is done using the mmap
operation exported by other drivers.
v2: remove platform_device and do not attach to dma bufs
v3: use drm helpers for get/put pages
v4: correct dumb create pitch
Reviewed-by: Rob Clark <robdclark@gmail.com> (v3)
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> (v3)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Zach Reizner <zachr@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently, third party bridge drivers(ptn3460) are dependent
on the corresponding encoder driver init, since bridge driver
needs a drm_device pointer to finish drm initializations.
The encoder driver passes the drm_device pointer to the
bridge driver. Because of this dependency, third party drivers
like ptn3460 doesn't adhere to the driver model.
In this patch, we reframe the bridge registration framework
so that bridge initialization is split into 2 steps, and
bridge registration happens independent of drm flow:
--Step 1: gather all the bridge settings independent of drm and
add the bridge onto a global list of bridges.
--Step 2: when the encoder driver is probed, call drm_bridge_attach
for the corresponding bridge so that the bridge receives
drm_device pointer and continues with connector and other
drm initializations.
The old set of bridge helpers are removed, and a set of new helpers
are added to accomplish the 2 step initialization.
The bridge devices register themselves onto global list of bridges
when they get probed by calling "drm_bridge_add".
The parent encoder driver waits till the bridge is available
in the lookup table(by calling "of_drm_find_bridge") and then
continues with its initialization.
The encoder driver should also call "drm_bridge_attach" to pass
on the drm_device to the bridge object.
drm_bridge_attach inturn calls "bridge->funcs->attach" so that
bridge can continue with drm related initializations.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Backmerge Linus tree after rc5 + drm-fixes went in.
There were a few amdkfd conflicts I wanted to avoid,
and Ben requested this for nouveau also.
Conflicts:
drivers/gpu/drm/amd/amdkfd/Makefile
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_priv.h
drivers/gpu/drm/amd/include/kgd_kfd_interface.h
drivers/gpu/drm/i915/intel_runtime_pm.c
drivers/gpu/drm/radeon/radeon_kfd.c
The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e.
at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display
controller device.
This display controller supports at least one primary plane and might
provide several overlays and an hardware cursor depending on the IP
version.
At the moment, this driver only implements an RGB connector to interface
with LCD panels, but support for other kind of external devices might be
added later.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Anthony Harivel <anthony.harivel@emtrion.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
When amdkfd and radeon are compiled inside the kernel image (not as modules),
radeon will load before amdkfd, which will cause a bug when radeon will probe
the GPUs.
When the two drivers are compiled as modules, amdkfd is loaded after radeon is
loaded but before radeon starts probing the GPUs. This is done because radeon
loads the amdkfd module through symbol_request function.
This patch makes amdkfd load before radeon when they are both compiled inside
the kernel image, which makes the behavior similar to the case when they are
modules, and prevents the kernel bug.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Merge rockchip GPU support.
This has a branch in common with the iommu tree, hopefully the
process works.
* 'drm_iommu_v15' of https://github.com/markyzq/kernel-drm-rockchip:
dt-bindings: video: Add documentation for rockchip vop
dt-bindings: video: Add for rockchip display subsytem
drm: rockchip: Add basic drm driver
dt-bindings: iommu: Add documentation for rockchip iommu
iommu/rockchip: rk3288 iommu driver
This patch adds the basic structure of a DRM Driver for Rockchip Socs.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
- convert the irq driver to use linear irq domains
- work out the device tree bindings, this lead to the common of_graph
bindings being used
- factor out common helper functions, this mostly resulted in the
component framework and drm of_graph helpers.
Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This merges all the remains of drm_usb into its only user, udl. We can
then drop all the drm_usb stuff, including dev->usbdev.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Radeon UMS is the last user of drm_buffer. Move it out of sight so radeon
can drop it together with UMS.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Everyone agrees we should do this,
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All that is left in drm_drv.c is ioctl management. Merge it into
drm_ioctl.c so we have all ioctl management in one file (and the name is
much more fitting).
Maybe we should now rename drm_stub.c to drm_drv.c again?
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Video Time Generator drivers are used to synchronize the compositor
and tvout hardware IPs by providing line count, sample count,
synchronization signals (HSYNC, VSYNC) and top and bottom fields
indication.
VTG are used by pair for each data path (main or auxiliary)
one for master and one for slave.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: register crtc with port
drm/armada: permit CRTCs to be registered as separate devices
dt-bindings: add Marvell Dove LCD controller documentation
drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock
drm/armada: convert to componentized support
drm: add of_graph endpoint helper to find possible CRTCs
component: fix bug with legacy API
drm/armada: make variant a CRTC thing
drm/armada: move variant initialisation to CRTC init
drm/armada: use number of CRTCs registered
drm/armada: move IRQ handling into CRTC
component: add support for component match array
component: ignore multiple additions of the same component
component: fix missed cleanup in case of devres failure
This patch adds the amdkfd skeleton driver. The driver does nothing except
define a /dev/kfd device.
It returns -ENODEV on all amdkfd IOCTLs.
v3: Move bool field to the end of structure, removed the pmc ioctls and added
a meaningful error message for ioctl error.
v5:
Create a new folder drm/amd and move amdkfd from drm/radeon/ to drm/amd/
Remove scheduler_class from kfd_priv.h as it was never used
Add skeleton implementation of the Get Version IOCTL
v6:
Update module version to the correct number and remove the "default m" from the
Kconfig file
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Add a helper to allow encoders to find their possible CRTCs from the
OF graph without having to re-implement this functionality. We add a
device_node to drm_crtc which corresponds with the port node in the
DT description of the CRTC device.
We can then scan the DRM device list for CRTCs to find their index,
matching the appropriate CRTC using the port device_node, thus building
up the possible CRTC mask.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is the initial import of the helper for displayport multistream.
It consists of a topology manager, init/destroy/set mst state
It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs
connector detect and edid retrieval interface.
It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only)
bandwidth manager API via vcpi allocation and payload updating,
along with a helper to check the ACT status.
Objects:
MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again
MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports
MST port - one port per port reported by branching units, can have MST units hanging from them as well.
Changes since initial posting:
a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state
b) add worker to handle connection state change events, for MST device chaining and hotplug
c) add a payload spinlock
d) add path sideband msg support
e) fixup enum path resources transmit
f) reduce max dpcd msg to 16, as per DP1.2 spec.
g) separate tx queue kicking from irq processing and move irq acking back to drivers.
Changes since v0.2:
a) reorganise code,
b) drop ACT forcing code
c) add connector naming interface using path property
d) add topology dumper helper
e) proper reference counting and lookup for ports and mstbs.
f) move tx kicking into a workq
g) add aux locking - this should be redone
h) split teardown into two parts
i) start working on documentation on interface.
Changes since v0.3:
a) vc payload locking and tracking fixes
b) add hotplug callback into driver - replaces crazy return 1 scheme
c) txmsg + mst branch device refcount fixes
d) don't bail on mst shutdown if device is gone
e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors
f) make DP payload updates timeout longer - observed on docking station redock
g) add more info to debugfs dumper
Changes since v0.4:
a) suspend/resume support
b) more debugging in debugfs
Changes since v0.5:
a) use byte * to avoid unnecessary stack usage
b) fix num_sdp_streams interpretation.
c) init payload state for unplug events
d) remove lenovo dock sink count hack
e) drop aux lock - post rebase
f) call hotplug on port destroy
TODO:
misc features
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For atomic, it will be quite necessary to not need to care so much
about locking order. And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.
Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.
Atomic will use this to keep track of which locks have been acquired
in a transaction.
v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The drm core shouldn't depend upon any helpers, and we make sure this
doesn't accidentally happen by moving them into the helper-only
drm_kms_helper.ko module.
v2: Don't break the build for vmwgfx, spotted by Matt.
v3: Unbreak the depency loop around CONFIG_FB (not actually a loop
since it involves select). Reported by Chris.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is leftover stuff from my previous doc round which I kinda wanted
to do but didn't yet due to rebase hell.
The modeset helpers and the probing helpers a independent and e.g.
i915 uses the probing stuff but has its own modeset infrastructure. It
hence makes to split this up. While at it add a DOC: comment for the
probing libraray.
It would be rather neat to pull some of the DocBook documenting these
two helpers into in-line DOC: comments. But unfortunately kerneldoc
doesn't support markdown or something similar to make nice-looking
documentation, so the current state is better.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we expose non-overlay planes to userspace, they will become
accessible via standard userspace plane API's. We should be able to
handle the standard plane operations against primary planes in a generic
way via the modeset handler.
Drivers that can program primary planes more efficiently, that want to
use their own primary plane structure to track additional information,
or that don't have the limitations assumed by the helpers are free to
provide their own implementation of some or all of these handlers.
v3: Tweak kerneldoc formatting slightly to avoid ugliness
v2:
- Move plane helpers to a new file (drm_plane_helper.c)
- Tighten checks on update handler (check for scaling, CRTC coverage,
subpixel positioning)
- Pass proper panning parameters to modeset interface
- Disallow disabling primary plane (and thus CRTC) if other planes are
still active on the CRTC.
- Use a minimal format list that should work on all hardware/drivers.
Drivers may call this function with a more accurate plane list to
enable additional formats they can support.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
