Commit 08df0d9a00 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep
warning"") provided a good rationale for removing separate lock for the
SHDN register access. However it restored the lockdep warning during the
system boot. To silence the lockdep warning, mark the mutex taken in the
max98090_shdn_save() function with the lockdep class dedicated for the
runtime DAPM operations: SND_SOC_DAPM_CLASS_RUNTIME. This finally fixes
the following lockdep warning observed on Exynos4412-based Odroid U3
board:
======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc7-next-20200123 #7329 Not tainted
------------------------------------------------------
alsactl/1105 is trying to acquire lock:
ed4f7cf4 (&card->dapm_mutex){+.+.}, at: max98090_shdn_save+0x1c/0x28
but task is already holding lock:
edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&card->controls_rwsem){++++}:
snd_ctl_add_replace+0x3c/0x84
dapm_create_or_share_kcontrol+0x24c/0x2e0
snd_soc_dapm_new_widgets+0x308/0x594
snd_soc_bind_card+0x834/0xa94
devm_snd_soc_register_card+0x34/0x6c
odroid_audio_probe+0x288/0x34c
platform_drv_probe+0x6c/0xa4
really_probe+0x200/0x48c
driver_probe_device+0x78/0x1f8
bus_for_each_drv+0x74/0xb8
__device_attach+0xd4/0x16c
bus_probe_device+0x88/0x90
deferred_probe_work_func+0x3c/0xd0
process_one_work+0x230/0x7bc
worker_thread+0x44/0x524
kthread+0x130/0x164
ret_from_fork+0x14/0x20
0x0
-> #0 (&card->dapm_mutex){+.+.}:
lock_acquire+0xe8/0x270
__mutex_lock+0x9c/0xb18
mutex_lock_nested+0x1c/0x24
max98090_shdn_save+0x1c/0x28
max98090_put_enum_double+0x20/0x40
snd_ctl_ioctl+0x190/0xbb8
ksys_ioctl+0x484/0xb10
ret_fast_syscall+0x0/0x28
0xbede0564
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
*** DEADLOCK ***
1 lock held by alsactl/1105:
#0: edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
stack backtrace:
CPU: 2 PID: 1105 Comm: alsactl Not tainted 5.5.0-rc7-next-20200123 #7329
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c01126f0>] (unwind_backtrace) from [<c010e1e8>] (show_stack+0x10/0x14)
[<c010e1e8>] (show_stack) from [<c0b5234c>] (dump_stack+0xb4/0xe0)
[<c0b5234c>] (dump_stack) from [<c018a610>] (check_noncircular+0x1ec/0x208)
[<c018a610>] (check_noncircular) from [<c018ca2c>] (__lock_acquire+0x1210/0x25ec)
[<c018ca2c>] (__lock_acquire) from [<c018e728>] (lock_acquire+0xe8/0x270)
[<c018e728>] (lock_acquire) from [<c0b71928>] (__mutex_lock+0x9c/0xb18)
[<c0b71928>] (__mutex_lock) from [<c0b723c0>] (mutex_lock_nested+0x1c/0x24)
[<c0b723c0>] (mutex_lock_nested) from [<c086097c>] (max98090_shdn_save+0x1c/0x28)
[<c086097c>] (max98090_shdn_save) from [<c08613f8>] (max98090_put_enum_double+0x20/0x40)
[<c08613f8>] (max98090_put_enum_double) from [<c0833f20>] (snd_ctl_ioctl+0x190/0xbb8)
[<c0833f20>] (snd_ctl_ioctl) from [<c02cae14>] (ksys_ioctl+0x484/0xb10)
[<c02cae14>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed331fa8 to 0xed331ff0)
...
Fixes: 08df0d9a00 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep warning"")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200123134046.9769-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when
changing sensitive registers SHDN bit") uses dapm_mutex to protect SHDN
bit. However, snd_soc_dapm_put_enum_double() in
max98090_dapm_put_enum_double() acquires the dapm_mutex again which
cause a deadlock.
Use snd_soc_dapm_put_enum_double_locked() instead to fix the deadlock.
Fixes: 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing sensitive registers SHDN bit")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-4-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2dc98af62c ("ASoC: max98090: fix lockdep warning") introduced
a helpful-less small lock: shdn_lock. Reverts the commit.
Reasons:
1. Lockdep should not be happy by either the original or current code.
From lockdep's point of view, there is a lock inversion anyway.
Let d = dapm_mutex, c = controls_rwsem, s = shdn_lock,
From the reported calling stack: lock acquisition order of
snd_soc_register_card() is: d -> c.
> snd_ctl_add_replace+0x3c/0x84
> dapm_create_or_share_kcontrol+0x24c/0x2e0
> snd_soc_dapm_new_widgets+0x308/0x594
> snd_soc_bind_card+0x80c/0xad4
> devm_snd_soc_register_card+0x34/0x6c
If calling snd_soc_dapm_put_enum_double() in kcontrol's put (e.g.
SOC_DAPM_ENUM_EXT), lock acquisition order is: c -> d. Note that,
snd_soc_dapm_put_enum_double() acquires d.
The possible lock inversion is always there if registering sound card
and putting mixer control happen at the same time. In fact, it never
happens because the control device don't show up to the userspace until
the sound card build success.
Commit 2dc98af62c ("ASoC: max98090: fix lockdep warning") changes the
order to: c -> s -> d. The lock inversion is still there.
2. Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when
changing sensitive registers SHDN bit") designed to use dapm_mutex to
protect SHDN bit. Use a separate lock breaks the protection.
DAPM changes SHDN bit automatically when it finds the path. Thus, any
code wants to change the SHDN bit, need to acquire the dapm_mutex first.
> SND_SOC_DAPM_SUPPLY("SHDN", M98090_REG_DEVICE_SHUTDOWN,
> M98090_SHDNN_SHIFT, 0, NULL, 0),
Fixes: 2dc98af62c ("ASoC: max98090: fix lockdep warning")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 4e93c1294f (ASoC: max98090: fix incorrect
helper in max98090_dapm_put_enum_double()) which was misapplied.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling many controls by
adding a custom put function to them. That new custom put function
properly handles relations between codec's hardware registers. However
they used card->dapm_mutex to properly serialize those operations. This
in turn triggers a lockdep warning about possible circular dependency.
Fix this by introducing a separate mutex only for serializing the SHDN
hardware register related operations.
This fixes the following lockdep warning observed on Exynos4412-based
Odroid U3 board:
======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc5-next-20200107 #166 Not tainted
------------------------------------------------------
alsactl/1104 is trying to acquire lock:
ed0d50f4 (&card->dapm_mutex){+.+.}, at: max98090_shdn_save+0x1c/0x28
but task is already holding lock:
edb4b49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&card->controls_rwsem){++++}:
snd_ctl_add_replace+0x3c/0x84
dapm_create_or_share_kcontrol+0x24c/0x2e0
snd_soc_dapm_new_widgets+0x308/0x594
snd_soc_bind_card+0x80c/0xad4
devm_snd_soc_register_card+0x34/0x6c
odroid_audio_probe+0x288/0x34c
platform_drv_probe+0x6c/0xa4
really_probe+0x200/0x490
driver_probe_device+0x78/0x1f8
bus_for_each_drv+0x74/0xb8
__device_attach+0xd4/0x16c
bus_probe_device+0x88/0x90
deferred_probe_work_func+0x3c/0xd0
process_one_work+0x22c/0x7c4
worker_thread+0x44/0x524
kthread+0x130/0x164
ret_from_fork+0x14/0x20
0x0
-> #0 (&card->dapm_mutex){+.+.}:
lock_acquire+0xe8/0x270
__mutex_lock+0x9c/0xb18
mutex_lock_nested+0x1c/0x24
max98090_shdn_save+0x1c/0x28
max98090_put_enum_double+0x20/0x40
snd_ctl_ioctl+0x190/0xbb8
ksys_ioctl+0x470/0xaf8
ret_fast_syscall+0x0/0x28
0xbefaa564
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
*** DEADLOCK ***
1 lock held by alsactl/1104:
#0: edb4b49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
stack backtrace:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
(unwind_backtrace) from [<c010e180>] (show_stack+0x10/0x14)
(show_stack) from [<c0b2a09c>] (dump_stack+0xb4/0xe0)
(dump_stack) from [<c018a1c0>] (check_noncircular+0x1ec/0x208)
(check_noncircular) from [<c018c5dc>] (__lock_acquire+0x1210/0x25ec)
(__lock_acquire) from [<c018e2d8>] (lock_acquire+0xe8/0x270)
(lock_acquire) from [<c0b49678>] (__mutex_lock+0x9c/0xb18)
(__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
(mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
(max98090_shdn_save) from [<c083a5b8>] (max98090_put_enum_double+0x20/0x40)
(max98090_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
(snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
(ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
Fixes: 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing sensitive registers")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200108115007.31095-2-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling "LTENL Mux", "LTENR
Mux", "LBENL Mux" and "LBENR Mux" controls by adding a custom
max98090_dapm_put_enum_double() function to them. However that function
used incorrect helper to get its component object. Fix this by using the
proper snd_soc_dapm_* helper.
This fixes the following NULL pointer exception observed on
Exynos4412-based Odroid U3 board:
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 000000b0
pgd = (ptrval)
[000000b0] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at __mutex_lock+0x54/0xb18
LR is at ___might_sleep+0x3c/0x2e0
...
Process alsactl (pid: 1104, stack limit = 0x(ptrval))
...
[<c0b49630>] (__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
[<c0b4a110>] (mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
[<c0839b3c>] (max98090_shdn_save) from [<c083a4f8>] (max98090_dapm_put_enum_double+0x20/0x40)
[<c083a4f8>] (max98090_dapm_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
[<c080d0e8>] (snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
[<c02cafec>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
---[ end trace 0e93f0580f4b9241 ]---
Fixes: 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing sensitive registers")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200108115007.31095-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing
sensitive registers") extended the code for handling "LTENL Mux", "LTENR
Mux", "LBENL Mux" and "LBENR Mux" controls by adding a custom
max98090_dapm_put_enum_double() function to them. However that function
used incorrect helper to get its component object. Fix this by using the
proper snd_soc_dapm_* helper.
This fixes the following NULL pointer exception observed on
Exynos4412-based Odroid U3 board:
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 000000b0
pgd = (ptrval)
[000000b0] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1104 Comm: alsactl Not tainted 5.5.0-rc5-next-20200107 #166
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at __mutex_lock+0x54/0xb18
LR is at ___might_sleep+0x3c/0x2e0
...
Process alsactl (pid: 1104, stack limit = 0x(ptrval))
...
[<c0b49630>] (__mutex_lock) from [<c0b4a110>] (mutex_lock_nested+0x1c/0x24)
[<c0b4a110>] (mutex_lock_nested) from [<c0839b3c>] (max98090_shdn_save+0x1c/0x28)
[<c0839b3c>] (max98090_shdn_save) from [<c083a4f8>] (max98090_dapm_put_enum_double+0x20/0x40)
[<c083a4f8>] (max98090_dapm_put_enum_double) from [<c080d0e8>] (snd_ctl_ioctl+0x190/0xbb8)
[<c080d0e8>] (snd_ctl_ioctl) from [<c02cafec>] (ksys_ioctl+0x470/0xaf8)
[<c02cafec>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
...
---[ end trace 0e93f0580f4b9241 ]---
Fixes: 62d5ae4caf ("ASoC: max98090: save and restore SHDN when changing sensitive registers")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200108115007.31095-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet, there are some registers can only be changed
when SHDN is 0. Changing these settings during SHDN = 1 can compromise
device stability and performance specifications.
Saves SHDN before writing to these sensitive registers and restores SHDN
afterward.
Here is the register list codec driver of max98090 wants to change:
M98090_REG_QUICK_SYSTEM_CLOCK 0x04
M98090_REG_QUICK_SAMPLE_RATE 0x05
M98090_REG_DAI_INTERFACE 0x06
M98090_REG_DAC_PATH 0x07
M98090_REG_MIC_DIRECT_TO_ADC 0x08
M98090_REG_LINE_TO_ADC 0x09
M98090_REG_ANALOG_MIC_LOOP 0x0A
M98090_REG_ANALOG_LINE_LOOP 0x0B
M98090_REG_SYSTEM_CLOCK 0x1B
M98090_REG_CLOCK_MODE 0x1C
M98090_REG_CLOCK_RATIO_NI_MSB 0x1D
M98090_REG_CLOCK_RATIO_NI_LSB 0x1E
M98090_REG_CLOCK_RATIO_MI_MSB 0x1F
M98090_REG_CLOCK_RATIO_MI_LSB 0x20
M98090_REG_MASTER_MODE 0x21
M98090_REG_INTERFACE_FORMAT 0x22
M98090_REG_TDM_CONTROL 0x23
M98090_REG_TDM_FORMAT 0x24
M98090_REG_IO_CONFIGURATION 0x25
M98090_REG_FILTER_CONFIG 0x26
M98090_REG_INPUT_ENABLE 0x3E
M98090_REG_OUTPUT_ENABLE 0x3F
M98090_REG_BIAS_CONTROL 0x42
M98090_REG_DAC_CONTROL 0x43
M98090_REG_ADC_CONTROL 0x44
M98090_REG_DRC_TIMING 0x33
M98090_REG_DRC_COMPRESSOR 0x34
M98090_REG_DRC_EXPANDER 0x35
M98090_REG_DSP_FILTER_ENABLE 0x41
M98090_REG_EQUALIZER_BASE 0x46
M98090_REG_RECORD_BIQUAD_BASE 0xAF
M98090_REG_DIGITAL_MIC_ENABLE 0x13
M98090_REG_DIGITAL_MIC_CONFIG 0x14
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191128151908.180871-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:
Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.
max98090_interrupt max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
restart max98090 codec
receive ULK INT
assert ULK == 0
schedule max98090_pll_work (1).
In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.
max98090_interrupt max98090_pll_work max98090 codec
----------------------------------------------------------------------
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
schedule max98090_pll_work
restart max98090 codec
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
read 0x01
assert ULK == 0 (2).
In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register. max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.
There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.
Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously. Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.
Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler. However, it could only punish the jack detection by extra
10~12 msec.
Adopts option B which is the better solution overall.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet, PLL lock time typically takes 2 msec and
at most takes 7 msec.
Check the lock status every 1 msec and exit the workaround if PLL is
locked.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-3-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It was observed Baytrail-based chromebooks could cause continuous PLL
unlocked when using playback stream and capture stream simultaneously.
Specifically, starting a capture stream after started a playback stream.
As a result, the audio data could corrupt or turn completely silent.
As the datasheet suggested, the maximum PLL lock time should be 7 msec.
The workaround resets the codec softly by toggling SHDN off and on if
PLL failed to lock for 10 msec. Notably, there is no suggested hold
time for SHDN off.
On Baytrail-based chromebooks, it would easily happen continuous PLL
unlocked if there is a 10 msec delay between SHDN off and on. Removes
the msleep().
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The supported formats are S16_LE and S24_LE now. However, by datasheet
of max98090, S24_LE is only supported when it is in the right justified
mode. We should remove 24-bit format if it is not in that mode to avoid
triggering error.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98090 driver defines 3 DAPM muxes; one for the right line output
(LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux)
and one for the right headphone mixer source (MIXHPRSEL Mux). The same
bit is used for the mux as well as the DAPM enable, and although the mux
can be correctly configured, after playback has completed, the mux will
be reset during the disable phase. This is preventing the state of these
muxes from being saved and restored correctly on system reboot. Fix this
by marking these muxes as SND_SOC_NOPM.
Note this has been verified this on the Tegra124 Nyan Big which features
the MAX98090 codec.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Fix warnings with W=1
If these variables are useful then this driver should be modified to
expose them.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
'commit b8a3ee820f ("ASoC: max98090: Add recovery for PLL lock failure")'
enabled a workaround PLL unlocked issues, but generates annoying
dev_info "PLL unlocked" messages at a 10ms rate, usually on startup.
Move to dev_info_ratelimited. This issue doesn't seem to impact audio
functionality. This trace is commented out in the GalliumOS patches,
it's better to keep it to check on potential quality issues
Tested on Lenovo 100s (Baytrail Chromebook)
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare snd_soc_codec_driver structures as const as they are only passed
as an argument to the function snd_soc_register_codec. This argument is
of type const, so declare the structures with this property as const.
In file codecs/sn95031.c, snd_soc_codec_driver structure is also used in
a copy operation along with getting passed to snd_soc_register_codec.
So, it can be made const too.
Done using Coccinelle:
@match disable optional_qualifier@
identifier s;
position p;
@@
static struct snd_soc_codec_driver s@p={...};
@good1@
identifier match.s;
position p;
@@
snd_soc_register_codec(...,&s@p,...)
@bad@
identifier match.s;
position p!={match.p,good1.p};
@@
s@p
@depends on !bad disable optional_qualifier@
identifier match.s;
@@
static
+const
struct snd_soc_codec_driver s={...};
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In max98090_probe(), code checks for micbias being out of range. The
'micbias' variable in unsigned and checked against M98090_MBVSEL_2V2 which
is zero, so remove this check.
sound/soc/codecs/max98090.c: In function ‘max98090_probe’:
sound/soc/codecs/max98090.c:2459:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
} else if (micbias < M98090_MBVSEL_2V2 || micbias > M98090_MBVSEL_2V8) {
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Enforce correct device sequencing when configuring a new
audio route when there is an existing active audio route(s).
This patch fixed recording noise issue while playback is active.
We have some registers which require the device to be in full shutdown
or to enter full shutdown before the register settings will take effect.
Currently the driver is not shutting down the device when a new audio
route is created. If a new audio route is made active while there is
already an active audio route, then the required register sequencing is
violated. A hardware shutdown toggle when creating a new audio route
corrects the sequencing error. The device must remain in hardware
shutdown for 40ms to allow the internal hardware core to fully shutdown.
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Acked-by: Anish Kumar <anish.kumar@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The readable registers are in consecutive ranges:
0x01 ~ 0x03, 0x0D ~ 0xD1, 0xFF
So simplify the implementation by specifying a range of consecutive values
in a single case label.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_dai_ops variables are not modified after initialization in
these drivers, so make them const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Constify the ACPI device ID array and the register map, no need to have
them writable at runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level() and all other
manual access to codec->dapm with snd_soc_codec_get_dapm().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
max98090_jack_work() doesn't modify the DAPM graph other than what's done
in snd_soc_jack_report(). snd_soc_jack_report() already calls
snd_soc_dapm_sync() internally, so there is no need to call it manually
and can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
All drivers have the same line at the end of the set_bias_level callback to
update the bias_level state. Move this update into
snd_soc_dapm_force_bias_level() and remove them from the drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
To fix pop noise when shutdown,the pop noise during shutdown
is the pmic cutoff power of codec without any notice.
Signed-off-by: jay.xu <xjq@rock-chips.com>
Signed-off-by: zhengxing <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix a regression in leds-gpio introduced by a recent commit that
inadvertently changed the name of one of the properties used by
the driver (Fabio Estevam).
- Fix a regression in the ACPI backlight driver introduced by a
recent fix that missed one special case that had to be taken
into account (Aaron Lu).
- Drop the level of some new kernel messages from the ACPI core
introduced by a recent commit to KERN_DEBUG which they should
have used from the start and drop some other unuseful KERN_ERR
messages printed by ACPI (Rafael J Wysocki).
- Revert an incorrect commit modifying the cpupower tool
(Prarit Bhargava).
- Fix two regressions introduced by recent commits in the OPP
library and clean up some existing minor issues in that code
(Viresh Kumar).
- Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout
the tree (or drop it where that can be done) in order to make
it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki,
Ulf Hansson, Ludovic Desroches). There will be one more
"CONFIG_PM_RUNTIME removal" batch after this one, because some
new uses of it have been introduced during the current merge
window, but that should be sufficient to finally get rid of it.
- Make the ACPI EC driver more robust against race conditions
related to GPE handler installation failures (Lv Zheng).
- Prevent the ACPI device PM core code from attempting to
disable GPEs that it has not enabled which confuses ACPICA
and makes it report errors unnecessarily (Rafael J Wysocki).
- Add a "force" command line switch to the intel_pstate driver
to make it possible to override the blacklisting of some
systems in that driver if needed (Ethan Zhao).
- Improve intel_pstate code documentation and add a MAINTAINERS
entry for it (Kristen Carlson Accardi).
- Make the ACPI fan driver create cooling device interfaces
witn names that reflect the IDs of the ACPI device objects
they are associated with, except for "generic" ACPI fans
(PNP ID "PNP0C0B"). That's necessary for user space thermal
management tools to be able to connect the fans with the
parts of the system they are supposed to be cooling properly.
From Srinivas Pandruvada.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5fo2
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are regression fixes (leds-gpio, ACPI backlight driver,
operating performance points library, ACPI device enumeration
messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device
PM), some cleanups in the operating performance points (OPP)
framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of
minor intel_pstate driver changes, a new MAINTAINERS entry for it and
an ACPI fan driver change needed for better support of thermal
management in user space.
Specifics:
- Fix a regression in leds-gpio introduced by a recent commit that
inadvertently changed the name of one of the properties used by the
driver (Fabio Estevam).
- Fix a regression in the ACPI backlight driver introduced by a
recent fix that missed one special case that had to be taken into
account (Aaron Lu).
- Drop the level of some new kernel messages from the ACPI core
introduced by a recent commit to KERN_DEBUG which they should have
used from the start and drop some other unuseful KERN_ERR messages
printed by ACPI (Rafael J Wysocki).
- Revert an incorrect commit modifying the cpupower tool (Prarit
Bhargava).
- Fix two regressions introduced by recent commits in the OPP library
and clean up some existing minor issues in that code (Viresh
Kumar).
- Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the
tree (or drop it where that can be done) in order to make it
possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf
Hansson, Ludovic Desroches).
There will be one more "CONFIG_PM_RUNTIME removal" batch after this
one, because some new uses of it have been introduced during the
current merge window, but that should be sufficient to finally get
rid of it.
- Make the ACPI EC driver more robust against race conditions related
to GPE handler installation failures (Lv Zheng).
- Prevent the ACPI device PM core code from attempting to disable
GPEs that it has not enabled which confuses ACPICA and makes it
report errors unnecessarily (Rafael J Wysocki).
- Add a "force" command line switch to the intel_pstate driver to
make it possible to override the blacklisting of some systems in
that driver if needed (Ethan Zhao).
- Improve intel_pstate code documentation and add a MAINTAINERS entry
for it (Kristen Carlson Accardi).
- Make the ACPI fan driver create cooling device interfaces witn
names that reflect the IDs of the ACPI device objects they are
associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B").
That's necessary for user space thermal management tools to be able
to connect the fans with the parts of the system they are supposed
to be cooling properly. From Srinivas Pandruvada"
* tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
MAINTAINERS: add entry for intel_pstate
ACPI / video: update the skip case for acpi_video_device_in_dod()
power / PM: Eliminate CONFIG_PM_RUNTIME
NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
ACPI / EC: Fix unexpected ec_remove_handlers() invocations
Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
ACPI / PM: Do not disable wakeup GPEs that have not been enabled
ACPI / utils: Drop error messages from acpi_evaluate_reference()
...
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under sound/.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
It is right not left sidetone which goes to "DACR".
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 5fe5b767dc ("ASoC: dapm: Do not pretend to support controls for non
mixer/mux widgets") revealed ill-defined control in a route between
"STENL Mux" and DACs in max98090.c:
max98090 i2c-193C9890:00: Control not supported for path STENL Mux -> [NULL] -> DACL
max98090 i2c-193C9890:00: ASoC: no dapm match for STENL Mux --> NULL --> DACL
max98090 i2c-193C9890:00: ASoC: Failed to add route STENL Mux -> NULL -> DACL
max98090 i2c-193C9890:00: Control not supported for path STENL Mux -> [NULL] -> DACR
max98090 i2c-193C9890:00: ASoC: no dapm match for STENL Mux --> NULL --> DACR
max98090 i2c-193C9890:00: ASoC: Failed to add route STENL Mux -> NULL -> DACR
Since there is no control between "STENL Mux" and DACs the control name must
be NULL not "NULL".
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Commit e409dfbfcc ("ASoC: dapm: Add a few supply widget sanity checks")
broke digital microphone support in max98090.c:
max98090 i2c-193C9890:00: Conditional paths are not supported for supply widgets (DMICL_ENA -> [DMIC] -> DMIC Mux)
max98090 i2c-193C9890:00: ASoC: no dapm match for DMICL_ENA --> DMIC --> DMIC Mux
max98090 i2c-193C9890:00: ASoC: Failed to add route DMICL_ENA -> DMIC -> DMIC Mux
max98090 i2c-193C9890:00: Conditional paths are not supported for supply widgets (DMICR_ENA -> [DMIC] -> DMIC Mux)
max98090 i2c-193C9890:00: ASoC: no dapm match for DMICR_ENA --> DMIC --> DMIC Mux
max98090 i2c-193C9890:00: ASoC: Failed to add route DMICR_ENA -> DMIC -> DMIC Mux
Problem is partially caused by commit f69e3caa9e ("ASoC: max98090: Enable
both DMIC channels also when using mono configuration") which connects
"DMICL_ENA" and "DMICR_ENA" supply widgets to "DMIC Mux".
Fix the breakage by reverting f69e3caa9e and then by adding additional
"DMICR_ENA" to "DMICL" and "DMICL_ENA" to "DMICR" cross-connections. This
disconnects these supply widgets from the mux and makes sure that both DMIC
data channels are still enabled together.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
In addtion expand the table to handle other values of sysclk. Instead
of making the table 3D, expand it to a more descriptive struct. The
divisors are specified in Table 19 of the 98090 data sheet version
0p94.
The dmic frequency was previously assumed. Instead make it explicit
and configurable through device tree. This now handles independently
set pclk and dmic frequency.
Based on downstream work by Ralph Birt.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Baytrail-based chromebooks have a 20MHz mclk, the code was setting
the divisor incorrectly in this case. According to the 98090
datasheet, the divisor should be set to DIV1 for 10 <= mclk <= 20.
Correct this and the surrounding clock ranges as well to match the
datasheet.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to MAX98090 specification "Digital microphone clock (DMC) is
enabled once both data channels are enabled.". Therefore both digital
microphone data channels must be enabled also when using mono microphone
configuration.
Fix this by moving "DMICL_ENA" and "DMICR_ENA" supply widgets from "DMICL"
and "DMICR" inputs to "DMIC Mux" in order to enable both data channels
whenever there is active mono or stereo digital microphone input path.
Use of "DMICL" and "DMICR" inputs are retained for informative source and in
case the driver would find use for exact digital microphone configuration in
the future.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
