Commit Graph

273 Commits

Author SHA1 Message Date
Jens Axboe
468f098734 Merge branch 'for-jens' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Keith for 4.16-rc.

* 'for-jens' of git://git.infradead.org/nvme:
  nvmet: fix PSDT field check in command format
  nvme-multipath: fix sysfs dangerously created links
  nvme-pci: Fix nvme queue cleanup if IRQ setup fails
  nvmet-loop: use blk_rq_payload_bytes for sgl selection
  nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
  nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
2018-02-28 12:18:58 -07:00
Baegjae Sung
9bd82b1a44 nvme-multipath: fix sysfs dangerously created links
If multipathing is enabled, each NVMe subsystem creates a head
namespace (e.g., nvme0n1) and multiple private namespaces
(e.g., nvme0c0n1 and nvme0c1n1) in sysfs. When creating links for
private namespaces, links of head namespace are used, so the
namespace creation order must be followed (e.g., nvme0n1 ->
nvme0c1n1). If the order is not followed, links of sysfs will be
incomplete or kernel panic will occur.

The kernel panic was:
  kernel BUG at fs/sysfs/symlink.c:27!
  Call Trace:
    nvme_mpath_add_disk_links+0x5d/0x80 [nvme_core]
    nvme_validate_ns+0x5c2/0x850 [nvme_core]
    nvme_scan_work+0x1af/0x2d0 [nvme_core]

Correct order
Context A     Context B
nvme0n1
nvme0c0n1     nvme0c1n1

Incorrect order
Context A     Context B
              nvme0c1n1
nvme0n1
nvme0c0n1

The nvme_mpath_add_disk (for creating head namespace) is called
just before the nvme_mpath_add_disk_links (for creating private
namespaces). In nvme_mpath_add_disk, the first context acquires
the lock of subsystem and creates a head namespace, and other
contexts do nothing by checking GENHD_FL_UP of a head namespace
after waiting to acquire the lock. We verified the code with or
without multipathing using three vendors of dual-port NVMe SSDs.

Signed-off-by: Baegjae Sung <baegjae@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-02-28 02:46:48 -07:00
Nitzan Carmi
8000d1fdb0 nvme-rdma: fix sysfs invoked reset_ctrl error flow
When reset_controller that is invoked by sysfs fails,
it enters an error flow which practically removes the
nvme ctrl entirely (similar to delete_ctrl flow). It
causes the system to hang, since a sysfs attribute cannot
be unregistered by one of its own methods.

This can be fixed by calling delete_ctrl as a work rather
than sequential code. In addition, it should give the ctrl
a chance to recover using reconnection mechanism (consistant
with FC reset_ctrl error flow). Also, while we're here, return
suitable errno in case the reset ended with non live ctrl.

Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-14 15:44:22 +02:00
Jianchao Wang
3fd176b754 nvme: fix the deadlock in nvme_update_formats
nvme_update_formats will invoke nvme_ns_remove under namespaces_mutext.
The will cause deadlock because nvme_ns_remove will also require
the namespaces_mutext. Fix it by getting the ns entries which should
be removed under namespaces_mutext and invoke nvme_ns_remove out of
namespaces_mutext.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-13 17:09:50 -07:00
Roland Dreier
0a34e4668c nvme: Don't use a stack buffer for keep-alive command
In nvme_keep_alive() we pass a request with a pointer to an NVMe command on
the stack into blk_execute_rq_nowait().  However, the block layer doesn't
guarantee that the request is fully queued before blk_execute_rq_nowait()
returns.  If not, and the request is queued after nvme_keep_alive() returns,
then we'll end up using stack memory that might have been overwritten to
form the NVMe command we pass to hardware.

Fix this by keeping a special command struct in the nvme_ctrl struct right
next to the delayed work struct used for keep-alives.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-12 22:18:14 +02:00
Keith Busch
8cb6af7b3a nvme: Fix discard buffer overrun
This patch checks the discard range array bounds before setting it in
case the driver gets a badly formed request.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-08 18:35:55 +02:00
Max Gurtovoy
3096a739d2 nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition
There is no logical reason to move from live state to connecting
state. In case of initial connection establishment, the transition
should be NVME_CTRL_NEW --> NVME_CTRL_CONNECTING --> NVME_CTRL_LIVE.
In case of error recovery or reset, the transition should be
NVME_CTRL_LIVE --> NVME_CTRL_RESETTING --> NVME_CTRL_CONNECTING -->
NVME_CTRL_LIVE.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-08 18:35:54 +02:00
Max Gurtovoy
b754a32c66 nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process
In order to avoid concurrent error recovery during initialization
process (allowed by the NVME_CTRL_NEW --> NVME_CTRL_RESETTING transition)
we must mark the ctrl as CONNECTING before initial connection
establisment.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-08 18:35:53 +02:00
Max Gurtovoy
ad6a0a52e6 nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
In pci transport, this state is used to mark the initialization
process. This should be also used in other transports as well.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2018-02-08 18:35:53 +02:00
Linus Torvalds
47fcc0360c Driver Core updates for 4.16-rc1
Here is the set of "big" driver core patches for 4.16-rc1.
 
 The majority of the work here is in the firmware subsystem, with reworks
 to try to attempt to make the code easier to handle in the long run, but
 no functional change.  There's also some tree-wide sysfs attribute
 fixups with lots of acks from the various subsystem maintainers, as well
 as a handful of other normal fixes and changes.
 
 And finally, some license cleanups for the driver core and sysfs code.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
 s6ygQPQhZIjKk2Lxa2hC
 =Zihy
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of "big" driver core patches for 4.16-rc1.

  The majority of the work here is in the firmware subsystem, with
  reworks to try to attempt to make the code easier to handle in the
  long run, but no functional change. There's also some tree-wide sysfs
  attribute fixups with lots of acks from the various subsystem
  maintainers, as well as a handful of other normal fixes and changes.

  And finally, some license cleanups for the driver core and sysfs code.

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
  device property: Define type of PROPERTY_ENRTY_*() macros
  device property: Reuse property_entry_free_data()
  device property: Move property_entry_free_data() upper
  firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
  firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
  USB: serial: keyspan: Drop firmware Kconfig options
  sysfs: remove DEBUG defines
  sysfs: use SPDX identifiers
  drivers: base: add coredump driver ops
  sysfs: add attribute specification for /sysfs/devices/.../coredump
  test_firmware: fix missing unlock on error in config_num_requests_store()
  test_firmware: make local symbol test_fw_config static
  sysfs: turn WARN() into pr_warn()
  firmware: Fix a typo in fallback-mechanisms.rst
  treewide: Use DEVICE_ATTR_WO
  treewide: Use DEVICE_ATTR_RO
  treewide: Use DEVICE_ATTR_RW
  sysfs.h: Use octal permissions
  component: add debugfs support
  bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
  ...
2018-02-01 10:00:28 -08:00
Linus Torvalds
0a4b6e2f80 Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
 "This is the main pull request for block IO related changes for the
  4.16 kernel. Nothing major in this pull request, but a good amount of
  improvements and fixes all over the map. This contains:

   - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
     Paolo.

   - Support for SMR zones for deadline and mq-deadline from Damien and
     Christoph.

   - Set of fixes for bcache by way of Michael Lyle, including fixes
     from himself, Kent, Rui, Tang, and Coly.

   - Series from Matias for lightnvm with fixes from Hans Holmberg,
     Javier, and Matias. Mostly centered around pblk, and the removing
     rrpc 1.2 in preparation for supporting 2.0.

   - A couple of NVMe pull requests from Christoph. Nothing major in
     here, just fixes and cleanups, and support for command tracing from
     Johannes.

   - Support for blk-throttle for tracking reads and writes separately.
     From Joseph Qi. A few cleanups/fixes also for blk-throttle from
     Weiping.

   - Series from Mike Snitzer that enables dm to register its queue more
     logically, something that's alwways been problematic on dm since
     it's a stacked device.

   - Series from Ming cleaning up some of the bio accessor use, in
     preparation for supporting multipage bvecs.

   - Various fixes from Ming closing up holes around queue mapping and
     quiescing.

   - BSD partition fix from Richard Narron, fixing a problem where we
     can't mount newer (10/11) FreeBSD partitions.

   - Series from Tejun reworking blk-mq timeout handling. The previous
     scheme relied on atomic bits, but it had races where we would think
     a request had timed out if it to reused at the wrong time.

   - null_blk now supports faking timeouts, to enable us to better
     exercise and test that functionality separately. From me.

   - Kill the separate atomic poll bit in the request struct. After
     this, we don't use the atomic bits on blk-mq anymore at all. From
     me.

   - sgl_alloc/free helpers from Bart.

   - Heavily contended tag case scalability improvement from me.

   - Various little fixes and cleanups from Arnd, Bart, Corentin,
     Douglas, Eryu, Goldwyn, and myself"

* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
  block: remove smart1,2.h
  nvme: add tracepoint for nvme_complete_rq
  nvme: add tracepoint for nvme_setup_cmd
  nvme-pci: introduce RECONNECTING state to mark initializing procedure
  nvme-rdma: remove redundant boolean for inline_data
  nvme: don't free uuid pointer before printing it
  nvme-pci: Suspend queues after deleting them
  bsg: use pr_debug instead of hand crafted macros
  blk-mq-debugfs: don't allow write on attributes with seq_operations set
  nvme-pci: Fix queue double allocations
  block: Set BIO_TRACE_COMPLETION on new bio during split
  blk-throttle: use queue_is_rq_based
  block: Remove kblockd_schedule_delayed_work{,_on}()
  blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
  blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
  lib/scatterlist: Fix chaining support in sgl_alloc_order()
  blk-throttle: track read and write request individually
  block: add bdev_read_only() checks to common helpers
  block: fail op_is_write() requests to read-only partitions
  blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
  ...
2018-01-29 11:51:49 -08:00
Johannes Thumshirn
ca5554a696 nvme: add tracepoint for nvme_complete_rq
Add a tracepoint in nvme_complete_rq() for completions of NVMe commands. An
expmale output of the trace-point is as follows:

<idle>-0     [001] d.h.     3.505266: nvme_complete_rq: cmdid=989, qid=1, res=0, retries=0, flags=0x0, status=0

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-26 12:34:40 +01:00
Johannes Thumshirn
3d030e41d9 nvme: add tracepoint for nvme_setup_cmd
Add tracepoints for nvme_setup_cmd() for tracing admin and/or nvm commands.

Examples of the two tracepoints are as follows for trace_nvme_setup_admin_cmd():
kworker/u8:0-5     [003] ....     2.998792: nvme_setup_admin_cmd: cmdid=14, flags=0x0, meta=0x0, cmd=(nvme_admin_create_cq cqid=1, qsize=1023, cq_flags=0x3, irq_vector=0)

and trace_nvme_setup_nvm_cmd():
dd-205   [001] ....     3.503929: nvme_setup_nvm_cmd: qid=1, nsid=1, cmdid=989, flags=0x0, meta=0x0, cmd=(nvme_cmd_read slba=4096, len=2047, ctrl=0x0, dsmgmt=0, reftag=0)

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-26 12:34:40 +01:00
Jianchao Wang
ad70062cdb nvme-pci: introduce RECONNECTING state to mark initializing procedure
After Sagi's commit (nvme-rdma: fix concurrent reset and reconnect),
both nvme-fc/rdma have following pattern:
RESETTING    - quiesce blk-mq queues, teardown and delete queues/
               connections, clear out outstanding IO requests...
RECONNECTING - establish new queues/connections and some other
               initializing things.
Introduce RECONNECTING to nvme-pci transport to do the same mark.
Then we get a coherent state definition among nvme pci/rdma/fc
transports.

Suggested-by: James Smart <james.smart@broadcom.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-26 08:12:04 +01:00
Roy Shterman
b227c59b9b nvme: host delete_work and reset_work on separate workqueues
We need to ensure that delete_work will be hosted on a different
workqueue than all the works we flush or cancel from it.
Otherwise we may hit a circular dependency warning [1].

Also, given that delete_work flushes reset_work, host reset_work
on nvme_reset_wq and delete_work on nvme_delete_wq. In addition,
fix the flushing in the individual drivers to flush nvme_delete_wq
when draining queued deletes.

[1]:
[  178.491942] =============================================
[  178.492718] [ INFO: possible recursive locking detected ]
[  178.493495] 4.9.0-rc4-c844263313a8-lb #3 Tainted: G           OE
[  178.494382] ---------------------------------------------
[  178.495160] kworker/5:1/135 is trying to acquire lock:
[  178.495894]  (
[  178.496120] "nvme-wq"
[  178.496471] ){++++.+}
[  178.496599] , at:
[  178.496921] [<ffffffffa70ac206>] flush_work+0x1a6/0x2d0
[  178.497670]
               but task is already holding lock:
[  178.498499]  (
[  178.498724] "nvme-wq"
[  178.499074] ){++++.+}
[  178.499202] , at:
[  178.499520] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.500343]
               other info that might help us debug this:
[  178.501269]  Possible unsafe locking scenario:

[  178.502113]        CPU0
[  178.502472]        ----
[  178.502829]   lock(
[  178.503115] "nvme-wq"
[  178.503467] );
[  178.503716]   lock(
[  178.504001] "nvme-wq"
[  178.504353] );
[  178.504601]
                *** DEADLOCK ***

[  178.505441]  May be due to missing lock nesting notation

[  178.506453] 2 locks held by kworker/5:1/135:
[  178.507068]  #0:
[  178.507330]  (
[  178.507598] "nvme-wq"
[  178.507726] ){++++.+}
[  178.508079] , at:
[  178.508173] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.509004]  #1:
[  178.509265]  (
[  178.509532] (&ctrl->delete_work)
[  178.509795] ){+.+.+.}
[  178.510145] , at:
[  178.510239] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.511070]
               stack backtrace:
:
[  178.511693] CPU: 5 PID: 135 Comm: kworker/5:1 Tainted: G           OE   4.9.0-rc4-c844263313a8-lb #3
[  178.512974] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[  178.514247] Workqueue: nvme-wq nvme_del_ctrl_work [nvme_tcp]
[  178.515071]  ffffc2668175bae0 ffffffffa7450823 ffffffffa88abd80 ffffffffa88abd80
[  178.516195]  ffffc2668175bb98 ffffffffa70eb012 ffffffffa8d8d90d ffff9c472e9ea700
[  178.517318]  ffff9c472e9ea700 ffff9c4700000000 ffff9c4700007200 ab83be61bec0d50e
[  178.518443] Call Trace:
[  178.518807]  [<ffffffffa7450823>] dump_stack+0x85/0xc2
[  178.519542]  [<ffffffffa70eb012>] __lock_acquire+0x17d2/0x18f0
[  178.520377]  [<ffffffffa75839a7>] ? serial8250_console_putchar+0x27/0x30
[  178.521330]  [<ffffffffa7583980>] ? wait_for_xmitr+0xa0/0xa0
[  178.522174]  [<ffffffffa70ac1eb>] ? flush_work+0x18b/0x2d0
[  178.522975]  [<ffffffffa70eb7cb>] lock_acquire+0x11b/0x220
[  178.523753]  [<ffffffffa70ac206>] ? flush_work+0x1a6/0x2d0
[  178.524535]  [<ffffffffa70ac229>] flush_work+0x1c9/0x2d0
[  178.525291]  [<ffffffffa70ac206>] ? flush_work+0x1a6/0x2d0
[  178.526077]  [<ffffffffa70a9cf0>] ? flush_workqueue_prep_pwqs+0x220/0x220
[  178.527040]  [<ffffffffa70ae7cf>] __cancel_work_timer+0x10f/0x1d0
[  178.527907]  [<ffffffffa70fecb9>] ? vprintk_default+0x29/0x40
[  178.528726]  [<ffffffffa71cb507>] ? printk+0x48/0x50
[  178.529434]  [<ffffffffa70ae8c3>] cancel_delayed_work_sync+0x13/0x20
[  178.530381]  [<ffffffffc042100b>] nvme_stop_ctrl+0x5b/0x70 [nvme_core]
[  178.531314]  [<ffffffffc0403dcc>] nvme_del_ctrl_work+0x2c/0x50 [nvme_tcp]
[  178.532271]  [<ffffffffa70ad741>] process_one_work+0x1e1/0x6a0
[  178.533101]  [<ffffffffa70ad6c2>] ? process_one_work+0x162/0x6a0
[  178.533954]  [<ffffffffa70adc4e>] worker_thread+0x4e/0x490
[  178.534735]  [<ffffffffa70adc00>] ? process_one_work+0x6a0/0x6a0
[  178.535588]  [<ffffffffa70adc00>] ? process_one_work+0x6a0/0x6a0
[  178.536441]  [<ffffffffa70b48cf>] kthread+0xff/0x120
[  178.537149]  [<ffffffffa70b47d0>] ? kthread_park+0x60/0x60
[  178.538094]  [<ffffffffa70b47d0>] ? kthread_park+0x60/0x60
[  178.538900]  [<ffffffffa78e332a>] ret_from_fork+0x2a/0x40

Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 17:09:30 +01:00
Sagi Grimberg
79c48ccf2f nvme-pci: serialize pci resets
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15 16:20:10 +01:00
Keith Busch
908e45643d nvme/multipath: Consult blk_status_t for failover
This removes nvme multipath's specific status decoding to see if failover
is needed, using the generic blk_status_t that was decoded earlier. This
abstraction from the raw NVMe status means all status decoding exists
in one place.

Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-10 10:52:14 -07:00
Keith Busch
e96fef2c3f nvme: Add more command status translation
This adds more NVMe status code translations to blk_status_t values,
and captures all the current status codes NVMe multipath uses.

Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-10 10:52:12 -07:00
Joe Perches
c828a89203 treewide: Use DEVICE_ATTR_RO
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible.

Done with perl script:

$ git grep -w --name-only DEVICE_ATTR | \
  xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}'

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09 16:34:34 +01:00
Israel Rukshin
b837b28394 nvme: fix subsystem multiple controllers support check
There is a problem when another module (e.g. nvmet) takes a reference on
the nvme block device and the physical nvme drive is removed.  In that
case nvme_free_ctrl() will not be called and the controller state will be
"deleting" or "dead" unless nvmet module releases the block device.
Later on, the same nvme drive probes back and nvme_init_subsystem() will
be called and fail due to duplicate subnqn (if the nvme device doesn't
support subsystem with multiple controllers). This will cause a probe
failure.  This commit changes the check of multiple controllers support
at nvme_init_subsystem() by not counting all the controllers at "dead" or
"deleting" state (this is safe because controllers at this state will
never be active again).

Fixes: ab9e00cc72 ("nvme: track subsystems")
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-08 16:57:00 +01:00
Nitzan Carmi
85088c4a0f nvme: take refcount on transport module
The block device is backed by the transport so we must ensure that the
transport driver will not be removed until all references are released.
Otherwise, we might end up referencing freed memory.

Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-08 16:56:57 +01:00
Jianchao Wang
2b1b7e784a nvme-pci: fix NULL pointer reference in nvme_alloc_ns
When the io queues setup or tagset allocation failed, ctrl.tagset is
NULL.  But the scan work will still be queued and executed, then panic
comes up due to NULL pointer reference of ctrl.tagset.

To fix this, add a new ctrl state NVME_CTRL_ADMIN_ONLY to inidcate only
admin queue is live. When non io queues or tagset allocation failed, ctrl
enters into this state, scan work will not be started.  But async event
work and nvme dev ioctl will be still available.  This will be helpful to
do further investigation and recovery.

Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-08 11:02:13 +01:00
Max Gurtovoy
1a3838d732 nvme: modify the debug level for setting shutdown timeout
When an NVMe controller reports RTD3 Entry Latency larger than the value
of shutdown_timeout module parameter, we update the shutdown_timeout
accordingly to honor RTD3 Entry Latency. Use an informational debug level
instead of a warning level for it.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-08 11:02:00 +01:00
Sagi Grimberg
479a322fb7 nvme-mpath: fix last path removal during traffic
In case our last path is removed during traffic, we can end up requeueing
the bio(s) but never schedule the actual requeue work as upper layers
still have open handles on the mpath device node.

Fix this by scheduling requeue work if the namespace being removed is
the last path in the ns_head path list.

Fixes: 32acab3181 ("nvme: implement multipath access to nvme subsystems")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-12-29 10:32:58 +01:00
Jeff Lien
cee160fd34 nvme: fix sector units when going between formats
If you format a device with a 4k sector size back to 512 bytes, the queue
limit values for physical block size and minimum IO size were not getting
updated; only the logical block size was being updated.  This patch adds
code to update the physical block and IO minimum sizes.

Signed-off-by: Jeff Lien <jeff.lien@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-12-29 10:31:05 +01:00
Keith Busch
654b4a4acd nvme: setup streams after initializing namespace head
Fixes a NULL pointer dereference.

Reported-by: Arnav Dawn <a.dawn@samsung.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-12-15 15:18:07 +01:00
Keith Busch
249159c5f1 nvme: check hw sectors before setting chunk sectors
Some devices with IDs matching the "stripe" quirk don't actually have
this quirk, and don't have an MDTS value. When MDTS is not set, the
driver sets the max sectors to UINT_MAX, which is not a power of 2,
hitting a BUG_ON from blk_queue_chunk_sectors. This patch skips setting
chunk sectors for such devices.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-12-15 15:18:07 +01:00
Ming Lei
bd9f5d6576 nvme: call blk_integrity_unregister after queue is cleaned up
During IO complete path, bio_integrity_advance() is often called, and
blk_get_integrity() is called in this function. But in
blk_integrity_unregister, the buffer pointed by queue->integrity
is cleared, and blk_integrity->profile becomes NULL, then blk_get_integrity
returns NULL, and causes kernel oops[1] finally.

This patch fixes this issue by calling blk_integrity_unregister() after
blk_cleanup_queue().

[1] kernel oops log
[  122.068007] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a
[  122.076760] IP: bio_integrity_advance+0x3d/0xf0
[  122.081815] PGD 0 P4D 0
[  122.084641] Oops: 0000 [#1] SMP
[  122.088142] Modules linked in: sunrpc ipmi_ssif intel_rapl vfat fat x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass mei_me ipmi_si crct10dif_pclmul crc32_pclmul sg mei ghash_clmulni_intel mxm_wmi ipmi_devintf iTCO_wdt intel_cstate intel_uncore pcspkr intel_rapl_perf iTCO_vendor_support dcdbas ipmi_msghandler lpc_ich acpi_power_meter shpchp wmi dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ahci nvme tg3 libahci nvme_core i2c_core libata ptp megaraid_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
[  122.149577] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.0-11.el7a.x86_64 #1
[  122.157635] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[  122.166179] task: ffff8802ff1e8000 task.stack: ffffc90000130000
[  122.172785] RIP: 0010:bio_integrity_advance+0x3d/0xf0
[  122.178419] RSP: 0018:ffff88047fc03d70 EFLAGS: 00010006
[  122.184248] RAX: ffff880473b08000 RBX: ffff880458c71a80 RCX: ffff880473b08248
[  122.192209] RDX: 0000000000000000 RSI: 000000000000003c RDI: ffffc900038d7ba0
[  122.200171] RBP: ffff88047fc03d78 R08: 0000000000000001 R09: ffffffffa01a78b5
[  122.208132] R10: ffff88047fc1eda0 R11: ffff880458c71ad0 R12: 0000000000007800
[  122.216094] R13: 0000000000000000 R14: 0000000000007800 R15: ffff880473a39b40
[  122.224056] FS:  0000000000000000(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000
[  122.233083] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  122.239494] CR2: 000000000000000a CR3: 0000000001c09002 CR4: 00000000001606e0
[  122.247455] Call Trace:
[  122.250183]  <IRQ>
[  122.252429]  bio_advance+0x28/0xf0
[  122.256217]  blk_update_request+0xa1/0x310
[  122.260778]  blk_mq_end_request+0x1e/0x70
[  122.265256]  nvme_complete_rq+0x1c/0xd0 [nvme_core]
[  122.270699]  nvme_pci_complete_rq+0x85/0x130 [nvme]
[  122.276140]  __blk_mq_complete_request+0x8d/0x140
[  122.281387]  blk_mq_complete_request+0x16/0x20
[  122.286345]  nvme_process_cq+0xdd/0x1c0 [nvme]
[  122.291301]  nvme_irq+0x23/0x50 [nvme]
[  122.295485]  __handle_irq_event_percpu+0x3c/0x190
[  122.300725]  handle_irq_event_percpu+0x32/0x80
[  122.305683]  handle_irq_event+0x3b/0x60
[  122.309964]  handle_edge_irq+0x8f/0x190
[  122.314247]  handle_irq+0xab/0x120
[  122.318043]  do_IRQ+0x48/0xd0
[  122.321355]  common_interrupt+0x9d/0x9d
[  122.325625]  </IRQ>
[  122.327967] RIP: 0010:cpuidle_enter_state+0xe9/0x280
[  122.333504] RSP: 0018:ffffc90000133e68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff35
[  122.341952] RAX: ffff88047fc1b900 RBX: ffff88047fc24400 RCX: 000000000000001f
[  122.349913] RDX: 0000000000000000 RSI: fffffcf2e6007295 RDI: 0000000000000000
[  122.357874] RBP: ffffc90000133ea0 R08: 000000000000062e R09: 0000000000000253
[  122.365836] R10: 0000000000000225 R11: 0000000000000018 R12: 0000000000000002
[  122.373797] R13: 0000000000000001 R14: ffff88047fc24400 R15: 0000001c6bd1d263
[  122.381762]  ? cpuidle_enter_state+0xc5/0x280
[  122.386623]  cpuidle_enter+0x17/0x20
[  122.390611]  call_cpuidle+0x23/0x40
[  122.394501]  do_idle+0x17e/0x1f0
[  122.398101]  cpu_startup_entry+0x73/0x80
[  122.402478]  start_secondary+0x178/0x1c0
[  122.406854]  secondary_startup_64+0xa5/0xa5
[  122.411520] Code: 48 8b 5f 68 48 8b 47 08 31 d2 4c 8b 5b 48 48 8b 80 d0 03 00 00 48 83 b8 48 02 00 00 00 48 8d 88 48 02 00 00 48 0f 45 d1 c1 ee 09 <0f> b6 4a 0a 0f b6 52 09 89 f0 48 01 73 08 83 e9 09 d3 e8 0f af
[  122.432604] RIP: bio_integrity_advance+0x3d/0xf0 RSP: ffff88047fc03d70
[  122.439888] CR2: 000000000000000a

Reported-by: Zhang Yi <yizhan@redhat.com>
Tested-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-12-15 15:18:07 +01:00
David Disseldorp
b224f6134d nvme: set discard_alignment to zero
Similar to 7c08428979 ("rbd: set discard_alignment to zero"), NVMe
devices are currently incorrectly initialised with the block queue
discard_alignment set to the NVMe stream alignment.

As per Documentation/ABI/testing/sysfs-block:
  The discard_alignment parameter indicates how many bytes the beginning
  of the device is offset from the internal allocation unit's natural
  alignment.

Correcting the discard_alignment parameter to zero has no effect on how
discard requests are propagated through the block layer - @alignment in
__blkdev_issue_discard() remains zero. However, it does fix other
consumers, such as LIO's Block Limits VPD response.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-12-15 15:13:32 +01:00
Keith Busch
9941a862cc nvme: Suppress static analyis warning
The ns->head is always valid, so we don't need to check for NULL.

Reported-by: Dan Carpenter <dan.caprenter@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20 08:38:11 +01:00
Keith Busch
b0d61d586f nvme: Fix NULL dereference on reservation request
This fixes using the NULL 'head' before getting the reference. It is
however possible the head will always be NULL, so this patch uses the
struct nvme_ns to get the ns_id field.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20 08:38:11 +01:00
Linus Torvalds
e2c5923c34 Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the main pull request for block storage for 4.15-rc1.

  Nothing out of the ordinary in here, and no API changes or anything
  like that. Just various new features for drivers, core changes, etc.
  In particular, this pull request contains:

   - A patch series from Bart, closing the whole on blk/scsi-mq queue
     quescing.

   - A series from Christoph, building towards hidden gendisks (for
     multipath) and ability to move bio chains around.

   - NVMe
        - Support for native multipath for NVMe (Christoph).
        - Userspace notifications for AENs (Keith).
        - Command side-effects support (Keith).
        - SGL support (Chaitanya Kulkarni)
        - FC fixes and improvements (James Smart)
        - Lots of fixes and tweaks (Various)

   - bcache
        - New maintainer (Michael Lyle)
        - Writeback control improvements (Michael)
        - Various fixes (Coly, Elena, Eric, Liang, et al)

   - lightnvm updates, mostly centered around the pblk interface
     (Javier, Hans, and Rakesh).

   - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)

   - Writeback series that fix the much discussed hundreds of millions
     of sync-all units. This goes all the way, as discussed previously
     (me).

   - Fix for missing wakeup on writeback timer adjustments (Yafang
     Shao).

   - Fix laptop mode on blk-mq (me).

   - {mq,name} tupple lookup for IO schedulers, allowing us to have
     alias names. This means you can use 'deadline' on both !mq and on
     mq (where it's called mq-deadline). (me).

   - blktrace race fix, oopsing on sg load (me).

   - blk-mq optimizations (me).

   - Obscure waitqueue race fix for kyber (Omar).

   - NBD fixes (Josef).

   - Disable writeback throttling by default on bfq, like we do on cfq
     (Luca Miccio).

   - Series from Ming that enable us to treat flush requests on blk-mq
     like any other request. This is a really nice cleanup.

   - Series from Ming that improves merging on blk-mq with schedulers,
     getting us closer to flipping the switch on scsi-mq again.

   - BFQ updates (Paolo).

   - blk-mq atomic flags memory ordering fixes (Peter Z).

   - Loop cgroup support (Shaohua).

   - Lots of minor fixes from lots of different folks, both for core and
     driver code"

* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
  nvme: fix visibility of "uuid" ns attribute
  blk-mq: fixup some comment typos and lengths
  ide: ide-atapi: fix compile error with defining macro DEBUG
  blk-mq: improve tag waiting setup for non-shared tags
  brd: remove unused brd_mutex
  blk-mq: only run the hardware queue if IO is pending
  block: avoid null pointer dereference on null disk
  fs: guard_bio_eod() needs to consider partitions
  xtensa/simdisk: fix compile error
  nvme: expose subsys attribute to sysfs
  nvme: create 'slaves' and 'holders' entries for hidden controllers
  block: create 'slaves' and 'holders' entries for hidden gendisks
  nvme: also expose the namespace identification sysfs files for mpath nodes
  nvme: implement multipath access to nvme subsystems
  nvme: track shared namespaces
  nvme: introduce a nvme_ns_ids structure
  nvme: track subsystems
  block, nvme: Introduce blk_mq_req_flags_t
  block, scsi: Make SCSI quiesce and resume work reliably
  block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
  ...
2017-11-14 15:32:19 -08:00
Martin Wilck
a04b5de505 nvme: fix visibility of "uuid" ns attribute
"uuid" must be invisible if both ns->uuid and ns->nguid are unset,
not if either one is.

Fixes: d934f9848a "nvme: provide UUID value to userspace"
Signed-off-by: Martin Wilck <mwilck@suse.com>
[hch: rebased to the nvme-4.15 tree to help resolving a conflict]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-11 15:38:21 -07:00
Hannes Reinecke
1e496938b6 nvme: expose subsys attribute to sysfs
We should be exposing the subsystem attributes like 'model' and
'subsysnqn' to sysfs to allow for easier identification of the
subsystem.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Hannes Reinecke
e9a48034d7 nvme: create 'slaves' and 'holders' entries for hidden controllers
When creating nvme multipath devices we should populate the 'slaves' and
'holders' directorys properly to aid userspace topology detection.

Signed-off-by: Hannes Reinecke <hare@suse.com>
[hch: split from a larger patch, compile fix for CONFIG_NVME_MULTIPATH=n]
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Christoph Hellwig
5b85b826b8 nvme: also expose the namespace identification sysfs files for mpath nodes
We do this by adding a helper that returns the ns_head for a device that
can belong to either the per-controller or per-subsystem block device
nodes, and otherwise reuse all the existing code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Christoph Hellwig
32acab3181 nvme: implement multipath access to nvme subsystems
This patch adds native multipath support to the nvme driver.  For each
namespace we create only single block device node, which can be used
to access that namespace through any of the controllers that refer to it.
The gendisk for each controllers path to the name space still exists
inside the kernel, but is hidden from userspace.  The character device
nodes are still available on a per-controller basis.  A new link from
the sysfs directory for the subsystem allows to find all controllers
for a given subsystem.

Currently we will always send I/O to the first available path, this will
be changed once the NVMe Asynchronous Namespace Access (ANA) TP is
ratified and implemented, at which point we will look at the ANA state
for each namespace.  Another possibility that was prototyped is to
use the path that is closes to the submitting NUMA code, which will be
mostly interesting for PCI, but might also be useful for RDMA or FC
transports in the future.  There is not plan to implement round robin
or I/O service time path selectors, as those are not scalable with
the performance rates provided by NVMe.

The multipath device will go away once all paths to it disappear,
any delay to keep it alive needs to be implemented at the controller
level.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Christoph Hellwig
ed754e5dee nvme: track shared namespaces
Introduce a new struct nvme_ns_head that holds information about an actual
namespace, unlike struct nvme_ns, which only holds the per-controller
namespace information.  For private namespaces there is a 1:1 relation of
the two, but for shared namespaces this lets us discover all the paths to
it.  For now only the identifiers are moved to the new structure, but most
of the information in struct nvme_ns should eventually move over.

To allow lockless path lookup the list of nvme_ns structures per
nvme_ns_head is protected by SRCU, which requires freeing the nvme_ns
structure through call_srcu.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Christoph Hellwig
002fab0404 nvme: introduce a nvme_ns_ids structure
This allows us to manage the various uniqueue namespace identifiers
together instead needing various variables and arguments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Christoph Hellwig
ab9e00cc72 nvme: track subsystems
This adds a new nvme_subsystem structure so that we can track multiple
controllers that belong to a single subsystem.  For now we only use it
to store the NQN, and to check that we don't have duplicate NQNs unless
the involved subsystems support multiple controllers.

Includes code originally from Hannes Reinecke to expose the subsystems
in sysfs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Bart Van Assche
9a95e4ef70 block, nvme: Introduce blk_mq_req_flags_t
Several block layer and NVMe core functions accept a combination
of BLK_MQ_REQ_* flags through the 'flags' argument but there is
no verification at compile time whether the right type of block
layer flags is passed. Make it possible for sparse to verify this.
This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: linux-nvme@lists.infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Keith Busch
e3d7874dcf nvme: send uevent for some asynchronous events
This will give udev a chance to observe and handle asynchronous event
notifications and clear the log to unmask future events of the same type.
The driver will create a change uevent of the asyncronuos event result
before submitting the next AEN request to the device if a completed AEN
event is of type error, smart, command set or vendor specific,

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Keith Busch
d99ca609a1 nvme: unexport starting async event work
Async event work is for core use only and should not be called directly
from drivers.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Keith Busch
ad22c355b7 nvme: remove handling of multiple AEN requests
The driver can handle tracking only one AEN request, so this patch
removes handling for multiple ones.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart  <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Keith Busch
38dabe210f nvme: centralize AEN defines
All the transports were unnecessarilly duplicating the AEN request
accounting. This patch defines everything in one place.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Javier González
ab083b11f6 nvme: fix eui_show() print format
Fix print formatting, but keep the original output to prevent user
breakage as suggested by Joe Perches.

Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Javier González
a47619b5c6 nvme: compare NQN string with right size
Copy subnqns using NVMF_NQN_SIZE as it is < 256

Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Keith Busch
84fef62d13 nvme: check admin passthru command effects
The NVMe standard provides a command effects log page so the host may
be aware of special requirements it may need to do for a particular
command. For example, the command may need to run with IO quiesced to
prevent timeouts or undefined behavior, or it may change the logical block
formats that determine how the host needs to construct future commands.

This patch saves the nvme command effects log page if the controller
supports it, and performs appropriate actions before and after an admin
passthrough command is completed. If the controller does not support the
command effects log page, the driver will define the effects for known
opcodes. The nvme format and santize are the only commands in this patch
with known effects.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Keith Busch
c627c487ec nvme: factor get log into a helper
And fix the warning on a successful firmware log.

Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00
Christoph Hellwig
715ea9e09d nvme: fix and clarify the check for missing metadata
Update the check in nvme_setup_rw for missing metadata so that it is
together with the other metadata handling, does not contain impossible
to reach conditions and warns if we get an impossible requests for
a (non-PI) metadata-enabled namespace when CONFIG_BLK_DEV_INTEGRITY
is not set.

Also add a little helper that checks if a given metadata configuration
contains protection information

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Javier González <jg@lightnvm.io>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10 19:53:25 -07:00